A. Griffo, D. Drury, T. Sawata, and P. H. Mellor, Sensorless starting of a wound-field synchronous starter/generator for aerospace applications, IEEE Transactions on Industrial Electronics, vol.59, issue.9, pp.3579-3587, 2012.
DOI : 10.1109/TIE.2011.2159953

Z. Chen, H. Wang, and Y. Yang, A Doubly Salient Starter/Generator With Two-Section Twisted-Rotor Structure for Potential Future Aerospace Application, IEEE Transactions on Industrial Electronics, vol.59, issue.9, pp.3588-3595, 2012.
DOI : 10.1109/TIE.2011.2159951

C. Wang, M. Jin, J. Shen, and C. Yuan, A Permanent Magnet Integrated Starter Generator for Electric Vehicle Onboard Range Extender Application, IEEE Transactions on Magnetics, vol.48, issue.4, pp.1625-1628, 2012.
DOI : 10.1109/TMAG.2011.2173469

J. Seo, S. Kim, and H. Jung, Rotor-Design Strategy of IPMSM for 42 V Integrated Starter Generator, IEEE Transactions on Magnetics, vol.46, issue.6, pp.2458-2461, 2010.
DOI : 10.1109/TMAG.2010.2043417

F. Chai, Y. Pei, X. Li, B. Guo, and S. Cheng, The Performance Research of Starter-Generator Based on Reluctance Torque Used in HEV, 2008 14th Symposium on Electromagnetic Launch Technology, pp.2458-2461, 2010.
DOI : 10.1109/ELT.2008.136

T. Fukami, Y. Matsuura, K. Shima, M. Momiyama, and M. Kawamura, A Multipole Synchronous Machine With Nonoverlapping Concentrated Armature and Field Windings on the Stator, IEEE Transactions on Industrial Electronics, vol.59, issue.6, pp.2583-2591, 2012.
DOI : 10.1109/TIE.2011.2157293

D. Stefano, R. , and F. Marignetti, Electromagnetic Analysis of Axial-Flux Permanent Magnet Synchronous Machines With Fractional Windings With Experimental Validation, IEEE Transactions on Industrial Electronics, vol.59, issue.6, pp.2573-2582, 2012.
DOI : 10.1109/TIE.2011.2165458

F. Pavlovcic, The commutator optimization due to electrically caused wear, The XIX International Conference on Electrical Machines, ICEM 2010, pp.1-6, 2010.
DOI : 10.1109/ICELMACH.2010.5607871

A. Vauquelin, J. Vilain, S. Vivier, N. Labbe, and B. Dupeux, A new modeling of DC machine taking into account commutation effects, Proc. XVIII International Conference on Electrical Machines (ICEM'2008), pp.1-6, 2008.

H. Wang, Modeling of universal motor performance and brush commutation using finite element computed inductance and resistance matrices, IEEE Transactions on Energy Conversion, vol.15, issue.3, pp.257-263, 2000.
DOI : 10.1109/60.875490

A. Di-gerlando and R. Perini, Model of the commutation phenomena in a universal motor, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03., pp.27-33, 2006.
DOI : 10.1109/IEMDC.2003.1211259

T. D. Batzel, N. C. Becker, and M. Comanescu, Analysis of brushed dc machinery fault with coupled finite element method and equivalent circuit model, IJME, vol.11, issue.2, pp.5-13, 2011.

T. Matsuda, T. Moriyama, N. Konda, Y. Suzuki, and Y. Hashimoto, Method for analyzing the commutation in small universal motors, IEE PROC-B, vol.142, pp.123-130, 1995.

Z. Glowacz and W. Glowacz, Mathematical Model of DC Motor for Analysis of Commutation Processes, 2007 IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, pp.65-68, 2007.
DOI : 10.1109/DEMPED.2007.4393084

R. Andreux, J. Fontchastagner, N. Takorabet, N. Labbe, and J. Metral, Magnetic field-electric circuit coupled method for brush DC motor simulations, 2012 XXth International Conference on Electrical Machines, 2012.
DOI : 10.1109/ICElMach.2012.6350265

G. C. Sincero, J. Ghannou, J. Cros, and P. Viarouge, Collector model for simulation of brush machines, Mathematics and Computers in Simulation, vol.81, issue.2, pp.340-353, 2010.
DOI : 10.1016/j.matcom.2010.07.025

D. Lin, P. Zhou, W. N. Fu, B. Ionescu, and Z. J. Cendes, A Flexible Approach for Brush-Commutation Machine Simulation, IEEE Transactions on Magnetics, vol.44, issue.6, pp.1542-1545, 2008.
DOI : 10.1109/TMAG.2007.916241

G. C. Sincero, J. Cros, and P. Viarouge, Arc Models for Simulation of Brush Motor Commutations, IEEE Transactions on Magnetics, vol.44, issue.6, pp.1518-1521, 2008.
DOI : 10.1109/TMAG.2007.915087

M. Willing, T. Miller, and I. Corral, A brush model for detailed commutation analysis of universal motors, Proc. XXth International Conference on Electrical Machines (ICEM'2012), 2012.

N. Bracikowski, M. Hecquet, P. Brochet, and S. V. Shirinskii, Multiphysics Modeling of a Permanent Magnet Synchronous Machine by Using Lumped Models, IEEE Transactions on Industrial Electronics, vol.59, issue.6, pp.2426-2437, 2012.
DOI : 10.1109/TIE.2011.2169640

C. Holzapfel, Selected Aspects of the Electrical Behavior in Sliding Electrical Contacts, 2011 IEEE 57th Holm Conference on Electrical Contacts (Holm), pp.1-9, 2011.
DOI : 10.1109/HOLM.2011.6034823

K. Liu, Z. Q. Zhu, Q. Zhang, and J. Zhang, Influence of Nonideal Voltage Measurement on Parameter Estimation in Permanent-Magnet Synchronous Machines, IEEE Transactions on Industrial Electronics, vol.59, issue.6, pp.2438-3447, 2012.
DOI : 10.1109/TIE.2011.2162214

W. N. Fu and S. L. Ho, Extension of the Concept of Windings in Magnetic Field—Electric Circuit Coupled Finite—Element Method, IEEE Transactions on Magnetics, vol.46, issue.6, pp.2119-2123, 2010.
DOI : 10.1109/TMAG.2010.2041433

R. Liu, Y. Zhang, M. Hu, and D. Yan, Field circuit coupled time stepping finite element analysis on permanent magnet brushless DC motors, Proc. ICEMS 2005, pp.2105-2108, 2005.

X. Wang and D. Xie, Analysis of Induction Motor Using Field-Circuit Coupled Time-Periodic Finite Element Method Taking Account of Hysteresis, IEEE Transactions on Magnetics, vol.45, issue.3, pp.1740-1743, 2009.
DOI : 10.1109/TMAG.2009.2012802

R. Pusca, R. Romary, V. Fireteanu, and A. Ceban, FINITE ELEMENT ANALYSIS AND EXPERIMENTAL STUDY OF THE NEAR-MAGNETIC FIELD FOR DETECTION OF ROTOR FAULTS IN INDUCTION MOTORS, Progress In Electromagnetics Research B, vol.50, pp.37-59, 2013.
DOI : 10.2528/PIERB13021203

H. Akbari, A MODIFIED MODEL OF SQUIRREL CAGE INDUCTION MACHINE UNDER GENERAL ROTOR MISALIGNMENT FAULT, Progress In Electromagnetics Research B, vol.54, pp.185-201, 2013.
DOI : 10.2528/PIERB13071804

R. S. Konwar, K. Kalita, A. Banerjee, and W. K. Khoo, ELECTROMAGNETIC ANALYSIS OF A BRIDGE CONFIGURED WINDING CAGE INDUCTION MACHINE USING FINITE ELEMENT METHOD, Progress In Electromagnetics Research B, vol.48, pp.347-373, 2013.
DOI : 10.2528/PIERB12112205

E. Lesniewska and R. Rajchert, 3D FIELD-CIRCUIT ANALYSIS OF MEASUREMENT PROPERTIES OF CURRENT TRANSFORMERS WITH AXIALLY AND RADIALLY CONNECTED CORES MADE OF DIFFERENT MAGNETIC MATERIALS, Progress In Electromagnetics Research M, vol.28, pp.1-13, 2013.
DOI : 10.2528/PIERM12101106

K. Kurihara and S. Sakamoto, Steady-State and Transient Performance Analysis for Universal Motors With Appropriate Turns Ratio of Lead Coils to Lag Coils, IEEE Transactions on Magnetics, vol.44, issue.6, pp.1506-1515, 2008.
DOI : 10.1109/TMAG.2007.916406

B. Davat, R. Ren, and M. Lajoie-mazenc, The movement in field modeling, IEEE Transactions on Magnetics, vol.21, issue.6, pp.2296-2298, 1985.
DOI : 10.1109/TMAG.1985.1064185

N. Sadowski, Y. Lefevre, M. Lajoie-mazenc, and J. Cros, Finite element torque calculation in electrical machines while considering the movement, IEEE Transactions on Magnetics, vol.28, issue.2, pp.1410-1413, 1992.
DOI : 10.1109/20.123957