O. Allegretti, M. Brunetti, I. Cuccui, S. Ferrari, M. Nocetti et al., Thermovacuum modification of spruce (Picea abies karst.) and fir (Abies albamill.) wood, Bioresources, vol.7, pp.3656-3669, 2012.

M. Altgen, C. Welzbacher, M. Humar, and H. Militz, ESR-spectroscopy as a potential method for the quality control of thermally modified wood, Proceedings of the 2nd Workshop Cost Action FP0904, pp.132-133, 2012.

B. Andersons, J. Chirkova, I. Andersone, and I. Irbe, Prediction of the properties of soft deciduous wood in thermal modification, Proceedings of the 2nd Workshop Cost Action FP0904, pp.96-97, 2012.

H. Bächle, B. Zimmer, and G. Wegener, Classification of thermally modified wood by FT-NIR spectroscopy and SIMCA, Wood Science and Technology, vol.2, issue.3, pp.1181-1192, 2012.
DOI : 10.1007/s00226-012-0481-z

B. Bal, Physikalische und mechanische Eigenschaften von thermisch modifiziertem juvenilem und adultem Schwarzkiefernholz, European Journal of Wood and Wood Products, vol.61, issue.2, pp.61-66, 2014.
DOI : 10.1007/s00107-013-0753-9

P. Bekhta and P. Niemz, Effect of High Temperature on the Change in Color, Dimensional Stability and Mechanical Properties of Spruce Wood, Holzforschung, vol.57, issue.5, pp.539-546, 2003.
DOI : 10.1515/HF.2003.080

M. Boonstra, M. Boonstra, B. Tjeerdsma, A. Pizzi, P. Tekely et al., C NMR CP-MAS Study of the Reactivity and Reactions of Polymeric Wood Components with Acetic Anhydride, Holzforschung, vol.50, issue.3, pp.215-220, 1996.
DOI : 10.1515/hfsg.1996.50.3.215

M. Boonstra and B. Tjeerdsma, Chemische Analyse von w??rmebehandeltem Holz, Holz als Roh- und Werkstoff, vol.122, issue.2, pp.204-211, 2006.
DOI : 10.1007/s00107-005-0078-4

M. Boonstra, A. Pizzi, F. Zomers, M. Ohlmeyer, and W. Paul, Auswirkungen einer zweistufigen thermischen Behandlung auf die Eigenschaften von Spanplatten, Holz als Roh- und Werkstoff, vol.32, issue.3, pp.157-164, 2006.
DOI : 10.1007/s00107-005-0055-y

A. Borgeais, The high temperature treatment of wood. The network timber professionals in Brittany, 2012.

J. Bourgeois, M. Bartholin, and R. Guyonnet, Thermal treatment of wood: analysis of the obtained product, Wood Science and Technology, vol.155, issue.291, pp.303-310, 1989.
DOI : 10.1007/BF00353246

C. Brischke, C. Welzbacher, K. Brandt, and A. Rapp, Quality control of thermally modified timber: Interrelationship between heat treatment intensities and CIE L*a*b* color data on homogenized wood samples, Holzforschung, vol.61, issue.1, pp.19-22, 2007.
DOI : 10.1515/HF.2007.004

A. Burmester, Formbeständigkeit von Holz gegenüber Feuchtigkeit Grundlagen und Vergütungsverfahren, BAM Berichte Nr, vol.4, 1970.

A. Burmester, Investigation on the dimensionnal stabilization of woood, Bundesanstalt fûr Materialprûfung, pp.50-56, 1973.

A. Burmester, The dimensional stabilization of wood, Holz als Roh- und Werkstoff, vol.20, issue.7, pp.333-335, 1975.
DOI : 10.1007/BF02612789

K. Candelier, M. Chaouch, S. Dumarçay, A. Petrissans, M. Petrissans et al., Utilization of thermodesorption coupled to GC???MS to study stability of different wood species to thermodegradation, Journal of Analytical and Applied Pyrolysis, vol.92, issue.2, pp.376-383, 2011.
DOI : 10.1016/j.jaap.2011.07.010

K. Candelier, S. Dumarçay, A. Pétrissans, P. Gérardin, and M. Pétrissans, Mechanical properties of heat treated wood after thermodegradation under different treatment intensity. International Conference " Mechano-chemical transformations of wood during thermohydro-mechanical processes, pp.16-18, 2011.

K. Candelier, S. Dumarçay, A. Petrissans, L. Desharnais, M. Petrissans et al., Comparison of chemical composition and decay durability of heat treated wood cured under different inert atmospheres: Nitrogen or vacuum, Polymer Degradation and Stability, vol.98, issue.2, pp.677-681, 2013.
DOI : 10.1016/j.polymdegradstab.2012.10.022

K. Candelier, A. Treu, J. Dibdiakova, E. Larnoy, S. Dumarçay et al., Thermodesorption coupled to GC???MS to characterize volatiles formation kinetic during wood thermodegradation, Journal of Analytical and Applied Pyrolysis, vol.101, pp.96-102, 2013.
DOI : 10.1016/j.jaap.2013.02.006

K. Candelier, S. Dumarçay, A. Pétrissans, P. Gérardin, and M. Pétrissans, Comparison of mechanical properties of heat treated beech wood cured under nitrogen or vacuum, Polymer Degradation and Stability, vol.98, issue.9, pp.1762-1765, 2013.
DOI : 10.1016/j.polymdegradstab.2013.05.026

K. Candelier, S. Dumarçay, A. Pétrissans, P. Gérardin, and M. Pétrissans, Advantage of vacuum versus nitrogen to achieve inert atmosphere during softwood thermal modification, Pro Ligno, vol.10, pp.10-17, 2014.

K. Candelier, S. Hannouz, M. Elaieb, R. Collet, S. Dumarçay et al., Utilization of temperature kinetics as a method to predict treatment intensity and corresponding treated wood quality: Durability and mechanical properties of thermally modified wood, Maderas. Ciencia y tecnolog??a, vol.17, issue.ahead, pp.253-262, 2015.
DOI : 10.4067/S0718-221X2015005000024

M. Chaouch, N. Chaouch, M. Pétrissans, M. Pétrissans, A. Gérardin et al., Use of wood elemental composition to predict heat treatment intensity and decay resistance of different softwood and hardwood species, Polymer Degradation and Stability, vol.95, issue.12, pp.2255-2259, 2010.
DOI : 10.1016/j.polymdegradstab.2010.09.010

M. Chaouch, S. Dumarçay, A. Pétrissans, M. Pétrissans, and P. Gérardin, Effect of heat treatment intensity on some conferred properties of different European softwood and hardwood species, Wood Science and Technology, vol.32, issue.2, pp.663-673, 2013.
DOI : 10.1007/s00226-013-0533-z

Y. Chen, Y. Fan, J. Gao, and N. Stark, The effect of heat treatment on the chemical and color change of black locust (Robinia pseudoacacia) wood flour, Bioresources, vol.7, pp.1157-1170, 2012.

T. Dilik and S. Hiziroglu, Bonding strength of heat treated compressed Eastern redcedar wood, Materials & Design, vol.42, pp.317-320, 2012.
DOI : 10.1016/j.matdes.2012.05.050

M. Elaieb, K. Candelier, A. Pétrissans, S. Dumarçay, P. Gérardin et al., Heat treatment of Tunisian soft wood species: Effect on the durability, chemical modifications and mechanical properties, Maderas. Ciencia y tecnolog??a, vol.17, issue.ahead, pp.699-710, 2015.
DOI : 10.4067/S0718-221X2015005000061

B. Esteves and H. Pereira, Qualit??tsbewertung von w??rmebehandeltem Holz mittels NIR-Spektroskopie, Holz als Roh- und Werkstoff, vol.13, issue.6, pp.323-332, 2008.
DOI : 10.1007/s00107-008-0262-4

B. Esteves, I. Domingos, and H. Pereira, Improvement of technological quality of eucalyptus wood by heat treatment in air at 170°C- 200°C. For Prod J57, pp.47-52, 2007.

B. Esteves, V. Marques, A. Domingos, I. Pereira, and H. , Heat-induced colour changes of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood, Wood Science and Technology, vol.58, issue.7, pp.369-384, 2008.
DOI : 10.1007/s00226-007-0157-2

D. Fengel and G. Wegener, Wood chemistry ultrastructure relation, 1989.

. Gieleber, Dimensional stabilization of wood by moisture-heat-pressure-treatment, Holz als Roh- und Werkstoff, vol.29, issue.3, pp.87-94, 1983.
DOI : 10.1007/BF02608498

G. Pe?a, M. Hale, and M. , Colour in thermally modified wood of beech, norway spruce and scots pine, Part 2: Properties predictions from colour changes, Holzforschung, vol.63, pp.394-401, 2008.

G. Gunduz, D. Aydemir, and G. Karakas, The effects of thermal treatment on the mechanical properties of wild Pear (Pyrus elaeagnifolia Pall.) wood and changes in physical properties, Materials & Design, vol.30, issue.10, pp.4391-4395, 2009.
DOI : 10.1016/j.matdes.2009.04.005

M. Hakkou, M. Pétrissans, A. Zoulalian, and P. Gérardin, Investigation of wood wettability changes during heat treatment on the basis of chemical analysis, Polymer Degradation and Stability, vol.89, issue.1, pp.1-5, 2005.
DOI : 10.1016/j.polymdegradstab.2004.10.017

M. Hakkou, M. Pétrissans, P. Gérardin, and A. Zoulalian, Investigations of the reasons for fungal durability of heat-treated beech wood, Polymer Degradation and Stability, vol.91, issue.2, pp.393-397, 2006.
DOI : 10.1016/j.polymdegradstab.2005.04.042

J. Hamada, A. Petrissans, F. Mothe, M. Petrissans, P. Gerardin et al., Analysis of the effects of the European oak natural variability on the modification of the density distribution and chemical composition during the heat treatment Proceedings of the Joint focus workshop of COST Action FP1006 & FP0904 Mechanical properties of heat treated French species wood, Proceedings of the 2nd Workshop Cost Action FP0904, pp.72-74, 2012.

S. Hannouz, R. Collet, J. Buteaud, L. Bléron, and K. Candelier, Mechanical characterization of heat treated ash wood in relation with structural timber standards, Pro Ligno, vol.11, pp.3-10, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01162542

S. Hietala, S. Maunu, F. Sundholm, S. Jämsa, and P. Viitaniemi, Structure of Thermally Modified Wood Studied by Liquid State NMR Measurements, Holzforschung, vol.56, issue.5, pp.522-528, 2002.
DOI : 10.1515/HF.2002.080

C. Hill, High temperature and chemical effects on wood stability, Thermal and other processes, pp.281-293, 1984.
DOI : 10.1007/BF00353364

G. Inari, M. Pétrissans, J. Lambert, J. Erhardt, and P. Gérardin, XPS characterization of wood chemical composition after heat-treatment, Surface and Interface Analysis, vol.61, issue.145, pp.1336-1342, 2006.
DOI : 10.1002/sia.2455

G. Inari, M. Petrissans, J. Lambert, J. Ehrhardt, and P. Gerardin, Chemical reactivity of heat-treated wood, Wood Science and Technology, vol.58, issue.4, pp.157-168, 2007.
DOI : 10.1007/s00226-006-0092-7

G. Inari, M. Pétrissans, A. Pétrissans, and P. Gérardin, Elemental composition of wood as a potential marker to evaluate heat treatment intensity, Polymer Degradation and Stability, vol.94, issue.3, pp.365-368, 2009.
DOI : 10.1016/j.polymdegradstab.2008.12.003

J. Jimenez, M. Acda, R. Razal, and P. Madamba, Physico- Mechanical Properties and Durability of Thermally Modified Malapapaya [Polyscias nodosa (Blume) Seem.] Wood, Philipp J Sci, vol.140, pp.13-23, 2011.

D. Johansson and T. Moren, Farbmessung als m??gliches Mittel zur Vorhersage der Festigkeit von w??rmebehandeltem Holz, Holz als Roh- und Werkstoff, vol.46, issue.2, pp.104-110, 2006.
DOI : 10.1007/s00107-005-0082-8

U. Junga, H. Militz, D. Ka?íková, F. Ka?íkb, I. ?abalováb et al., Particularities in agar block tests of some modified woods caused by different protection and decay resistance Effects of thermal treatment on chemical, mechanical and colour traits in Norway spruce wood, Proceedings of the 2nd European Conference on Wood Modification, pp.669-674, 2005.

D. Kamdem, A. Pizzi, R. Guyonnet, and A. Jermannaud, Durability of heat-treated wood, Holz als Roh- und Werkstoff, vol.60, issue.1, pp.1-6, 1999.
DOI : 10.1007/s00107-001-0261-1

G. Kim, K. Yun, and J. Kim, Effect of heat treatment on the decay resistance and the bending properties of radiate pine sapwood, Mater und Organismen, vol.32, pp.101-108, 1998.

D. Kocaefe, S. Poncsak, and Y. Boluk, Effect of thermal treatment on the chemical composition and mechanical properties of birch and aspen, Bioresources, vol.3, pp.517-537, 2008.

A. Kollman and D. Fengel, Changes in chemical composiyion of wood by heat treatment, Holz Roh Werkst, vol.12, pp.461-468, 1965.

A. Kollman and A. Schneider, On the sorption-behaviour of heat stabilized wood, Holz als Roh- und Werkstoff, vol.2, issue.Nr. 11, pp.77-85, 1963.
DOI : 10.1007/BF02609705

S. Korkut, D. Korkut, D. Kocaefe, D. Elustondo, A. Bajraktari et al., Effect of thermal modification on the properties of narrowleaved ash and chestnut, Ind CropProd, vol.35, pp.287-294, 2012.

R. Kotilanen, Chemical changes in wood during heating at 150- 260°C, p.51, 2000.

M. Li, . Shi-chao, S. Cheng, D. Li, S. Wang et al., Structural characterization of steam-heat treated Tectona grandis wood analyzed by FT-IR and 2D-IR correlation spectroscopy, Chinese Chemical Letters, vol.26, issue.2, pp.221-225, 2015.
DOI : 10.1016/j.cclet.2014.11.024

M. Matsuo, M. Yokoyama, K. Umemura, J. Gril, H. Yano et al., Color changes in wood during heating: kinetic analysis by??applying a time-temperature superposition method, Applied Physics A, vol.71, issue.3, pp.47-52, 2010.
DOI : 10.1007/s00339-010-5542-2

M. Matsuo, M. Yokoyama, K. Umemura, J. Sugiyama, S. Kawai et al., Aging of wood: Analysis of color changes during natural aging and heat treatment, Holzforschung, vol.65, issue.3, pp.361-368, 2011.
DOI : 10.1515/hf.2011.040

B. Mazela, R. Zakrzewski, W. Grzeskowiak, G. Cofta, M. Bartkowiak et al., Preliminary research on the biological resistance of thermally modified wood Resistance of thermally modified wood to basidiomycetes, Proceedings of the 1st European Conference on Wood Modification, 2003.

A. Mcdonald, M. Fernandez, and B. Kreber, Chemical and UV?VIS spectroscopic study on kiln brown stain formation in Radiata pine, Proceedings of the 9 th international symposium of wood and pulping chemistry, pp.1-5, 1997.

H. Militz, Heat treatment of wood: European Processes and their background. Document No. IRG/WP 02?40241. The International Research Group on Wood Preservation, 2002.

K. Mitsui, H. Takada, M. Sugiyama, and R. Hasegawa, Changes in the Properties of Light-Irradiated Wood with Heat Treatment. Part 1. Effect of Treatment Conditions on the Change in Color, Holzforschung, vol.55, issue.6, pp.601-605, 2001.
DOI : 10.1515/HF.2001.098

K. Mitsui, A. Murata, M. Kohara, and S. Tsuchikawa, Color modification of wood by light-irradiation and heat treatment P (2012) Effect of heat treatment intensity on wood chemical composition and decay durability of Pinus patula, Proceedings of the 1st European conference on wood modification, pp.519-524, 2003.

N. Inari, G. Pétrissans, M. Pétrissans, A. Gérardin, and P. , Elemental composition of wood as a potential marker to evaluate heat treatment intensity, Polymer Degradation and Stability, vol.94, issue.3, pp.365-368, 2009.
DOI : 10.1016/j.polymdegradstab.2008.12.003

M. Nuopponen, T. Vuorinen, S. Jamsa, and P. Viitaniemi, Thermal Modifications in Softwood Studied by FT???IR and UV Resonance Raman Spectroscopies, Journal of Wood Chemistry and Technology, vol.50, issue.1, pp.13-26, 2004.
DOI : 10.1366/000370203321165214

M. Olarescu, M. Campean, M. Ispas, and C. Cosereanu, Effect of thermal treatment on some properties of lime wood, European Journal of Wood and Wood Products, vol.8, issue.4, pp.559-562, 2014.
DOI : 10.1007/s00107-014-0809-5

M. Patzelt, G. Emsenhuber, R. Stingl, W. Paul, M. Ohlmeyer et al., Color measurement as means of quality control of thermally treated wood Thermal modification of OSBstrands by a one-step heat pretreatment -Influence of temperature on weight loss, hygroscopicity and improved resistance, Procedings of the 1st European Conference on Wood Modification, pp.57-63, 2003.

M. Pétrissans, A. Pétrissans, and P. Gérardin, Check the durability of heat-treated beech wood, French]. Tracés, Bulletin technique Technologie du bois de la Suisse Romande, pp.12-16, 2007.

M. Pétrissans, A. Pétrissans, and P. Gérardin, Pore size diameter, shrinkage and specific gravity evolution during the heat treatment of wood, Journal of Innovation In Forest Industry And Engineering Design, 2013.

A. Pétrissans, R. Younsi, M. Chaouch, P. Gérardin, and M. Pétrissans, Wood thermodegradation: experimental analysis and modeling of mass loss kinetics, Maderas. Ciencia y tecnolog??a, vol.16, issue.ahead, pp.133-148, 2014.
DOI : 10.4067/S0718-221X2014005000011

C. Popescu and M. Popescu, A near infrared spectroscopic study of the structural modifications of lime (Tilia cordata Mill.) wood during hydro-thermal treatment, Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, vol.115, pp.227-233, 2013.
DOI : 10.1016/j.saa.2013.06.002

M. Popescu, J. Froidevaux, P. Navi, and C. Popescu, Structural modifications of Tilia cordata wood during heat treatment investigated by FT-IR and 2D IR correlation spectroscopy, Journal of Molecular Structure, vol.1033, pp.176-186, 2013.
DOI : 10.1016/j.molstruc.2012.08.035

M. Prinks, K. Ptasinski, and F. Jansen, Torrefaction of wood, Journal of Analytical and Applied Pyrolysis, vol.77, issue.1, pp.35-40, 2006.
DOI : 10.1016/j.jaap.2006.01.001

A. Rapp, G. França-rep, F. Pohleven, and B. Bucar, Review on heat treatments of wood, COST ACTION E22-Environmental optimisation of wood protection Charateristics of thermally modified wood in vacuum. Document No. IRG/WP 04?40287. The International Research Group on Wood Preservation Thermal degradation of wood at temperature up to 200°C: Part I, Proceedings of Special Seminar in Antibes, pp.273-281, 1973.

H. Rusche, Thermal degradation of wood at temperatures up to 200??C???Part II: Reaction Kinetics of loss of mass during heat treatment of wood, Holz als Roh- und Werkstoff, vol.29, issue.4, pp.307-312, 1973.
DOI : 10.1007/BF02607365

A. Sandak, J. Sandak, and O. Allegrtti, Quality control of vacuum thermally modified wood with near infrared spectroscopy, Vacuum, vol.114, pp.44-48, 2015.
DOI : 10.1016/j.vacuum.2014.12.027

R. Seborg, H. Tarkow, and A. Stamm, Effect of heat upon the dimensional stabilization of woodSehistedt- Persson (2003) Colour responses to heat treatment of extractives and sap from pine and spruce, Proceedings of the 8th International IUFRO wood drying conference, pp.59-67, 1953.

M. Sehistedt-persson, Colour responses to heat treatment of extractives and sap from pine and spruce, Proceedings of the 8th IUFRO Wood Drying Conference European, 2003.

N. Senesi and G. Senesi, Electron-spin resonance spectroscopy. Encyclopedia of soils in the environment, pp.426-437, 2005.

H. Sivonen, S. Maunu, F. Sundholm, S. Jämsä, and P. Viitaniemi, Magnetic Resonance Studies of Thermally Modified Wood, Holzforschung, vol.56, issue.6, pp.648-654, 2002.
DOI : 10.1515/HF.2002.098

E. Sjöström, Wood polysaccharides, in Wood chemistry. Fundamentals and applications. Academic press, pp.49-67, 1981.

A. Stamm and L. Hansen, Minimizing Wood Shrinkage and Swelling Effect of Heating in Various Gases, Industrial & Engineering Chemistry, vol.29, issue.7, pp.831-833, 1937.
DOI : 10.1021/ie50331a021

A. Stamm, H. Burr, and A. Kline, Staybwood???Heat-Stabilized Wood, Industrial & Engineering Chemistry, vol.38, issue.6, pp.630-634, 1946.
DOI : 10.1021/ie50438a027

B. Sundqvist, The influence of wood polymers and extractives on wood colour induced by hydrothermal treatment, Holz als Roh- und Werkstoff, vol.60, issue.5, pp.375-376, 2002.
DOI : 10.1007/s00107-002-0320-2

T. Surini, F. Charrier, J. Malvestio, B. Charrier, A. Moubarik et al., Physical properties and termite durability of maritime pine Pinus pinaster Ait., heat-treated under vacuum pressure, Wood Science and Technology, vol.41, issue.12, pp.487-501, 2012.
DOI : 10.1007/s00226-011-0421-3

URL : https://hal.archives-ouvertes.fr/hal-00747658

?. ?u?ter?ic, A. Mohareb, M. Chaouch, M. Pétrissans, M. Petri? et al., Prediction of the decay resistance of heat treated wood on the basis of its elemental composition, Polymer Degradation and Stability, vol.95, issue.1, pp.94-97, 2010.
DOI : 10.1016/j.polymdegradstab.2009.10.013

C. Tenorio and R. Moya, Thermogravimetric characteristics, its relation with extractives and chemical properties and combustion characteristics of ten fast-growth species in Costa Rica, Thermochimica Acta, vol.563, pp.12-21, 2013.
DOI : 10.1016/j.tca.2013.04.005

H. Tiemann, Effects of different methods of drying on the strength and hygroscopicity of wood The Kiln drying of lumber, 1920.

B. Tjeerdsma and H. Militz, Ver???nderungen der Zellwandchemie hydrothermisch behandelten Holzes, Holz als Roh- und Werkstoff, vol.122, issue.2, pp.102-111, 2005.
DOI : 10.1007/s00107-004-0532-8

B. Tjeerdsma, M. Boonstra, A. Pizzi, P. Tekely, and H. Militz, Charakterisieren von thermisch behandeltem Holz: Molekulare Ursachen f??r die Verbesserung der Holzstabilit??t, Holz als Roh- und Werkstoff, vol.48, issue.5, pp.149-153, 1998.
DOI : 10.1007/s001070050287

B. Tjeerdsma, M. Stevens, and H. Militz, Durability aspects of hydrothermal treated wood. Document No. IRG/WP00-40160. The International Research Group on Wood Preservation Estimation of heat treated wood properties by color change, Bioressources, vol.7, pp.799-815, 2000.

P. Viitaniemi, S. Jämsä, and H. Viitanen, Method for improving biodegradation resistance and dimensional stability of cellulosic products. United States Patent No, 1997.

P. Viitaniemi, S. Jämsä, and F. Sundholm, Method of determining the degree of modification of heat modified wood products, Search International and National Patent Collections, 2001.

C. Welzbacher and O. Rapp, Influence of treatment temperature and duration on selected biological, mechanical, physical and optical properties of thermally modified timber, Wood Material Science and Engineering, vol.48, issue.2, pp.66-76, 2002.
DOI : 10.1007/s00107-005-0033-4

C. Welzbacher, L. Jazayeri, C. Brischke, and A. Rapp, Increased resistance of thermally modified Norway spruce timber (TMT) against brown rot decay by Oligoporus placenta ? Study on the mode of protective action, pp.13-26, 2008.

W. Willems, W. Willems, A. Tausch, and H. Militz, The average carbon oxidation state of thermally modified wood as a marker for its decay resistance against Basidiomycetes, Polymer Degradation and Stability, vol.98, issue.11, pp.2140-2145, 2010.
DOI : 10.1016/j.polymdegradstab.2013.09.003

S. Yildiz, D. Gezer, and U. Yildiz, Mechanical and chemical behavior of spruce wood modified by heat, Building and Environment, vol.41, issue.12, pp.1762-1766, 2006.
DOI : 10.1016/j.buildenv.2005.07.017

A. Zanuncio, J. Motta, T. Silveira, D. Sa, F. Trugilho et al., Physical and Colorimetric Changes in Eucalyptus grandis Wood after Heat Treatment, BioResources, vol.9, issue.1, pp.293-302, 2014.
DOI : 10.15376/biores.9.1.293-302