L. Différentes, L. De, . Des, and . Des, 1. Rappel : le profil d'émergence 3.1.1. Définition 3.1.2. Dans le sens horizontal 3.1.3

L. Situation and D. Ces, 1. Rappel : l'espace biologique 4.1.1. Rappels anatomiques 4.1.2. La violation de l'espace biologique et ses conséquences tissulaires 4.1.2.1, Historique 4.1.2.2. Conséquences biologiques et cliniques a. Les manifestations biologiques b. Les manifestations cliniques

. La-limite-intra, Dans le plan horizontal Rôles des fraises en carbure de tungstène 1.2.1.2. La forme des fraises a. Classification fonction de la forme générale de la partie travaillante Les fraises cylindriques Les fraises coniques Les fraises flammes Les fraises boules Les fraises ballon de rugby ou « bouton » b. Classification fonction de la forme de l'extrémité de la fraise Les extrémités plates Les extrémités à angle externe arrondi Les extrémités rondes Les extrémités elliptiques Les extrémités angulées Les extrémités pointues c. Les fraises spéciales Les instruments à pointe mousse Les instruments actifs à la pointe seulement Les instruments à limite d'enfoncement Les instruments avec pointe-guide Partie III, CAS FAVORABLES 1.1. Couronne coulée (CC) 1.2. Couronne céramo-métallique

I. Abrahamsson, T. Berglundh, P. Glantz, and J. Lindhe, The mucosal attachment at different abutments. An experimental study in dogs, Journal of Clinical Periodontology, vol.99, issue.9, pp.721-728, 1998.
DOI : 10.1023/A:1018579605426

E. Adamczyk and E. Spiechowicz, Plaque accumulation on crowns made of various materials, Int J Prosthodont, vol.3, issue.3, pp.285-91, 1990.

D. Allan, Cavity finishing, Br Dent J, vol.125, p.540, 1968.

M. Andersson, A unique method for fabrication of a crown restoration using titanium, Tadlakartidningen, vol.79, issue.11, pp.640-642, 1987.

M. Andersson, B. Bergman, C. Bessing, G. Ericson, P. Lundquist et al., Clinical results with titanium crowns fabricated with machine duplication and spark erosion, Acta Odontologica Scandinavica, vol.46, issue.5, pp.279-86, 1989.
DOI : 10.3109/00016358809004762

F. Andreasen, J. Daugaard-jensen, and E. Munksgaard, Reinforcement of bonded crown fractured incisors with porcelain veneers. Endod Dent Traumatol, pp.78-83, 1991.

F. Andreasen, E. Flugge, J. Daugaard-jensen, and E. Munksgaard, Treatment of crown fractured incisors with laminate veneer restorations. An experimental study. Endod Dent Traumatol, 1992.

S. Armand and J. Vergé, Le joint céramique-dent, Cah Prothèse, vol.83, 1993.

H. Avary, Classification of Teeth as a Guiding Factor in the Correct Preparation for Porcelain Jacket Crowns, The Journal of the National Dental Association, vol.8, issue.3, pp.233-238, 1921.
DOI : 10.14219/jada.archive.1921.0076

M. Ayad, W. Johnston, and S. Rosenstiel, Influence of dental rotary instruments on the roughness and wettability of human dentin surfaces, The Journal of Prosthetic Dentistry, vol.102, issue.2, pp.81-88, 2009.
DOI : 10.1016/S0022-3913(09)60114-1

M. Ayad, S. Rosenstiel, and M. Hassan, Surface roughness of dentin after tooth preparation with different rotary instrumentation, The Journal of Prosthetic Dentistry, vol.75, issue.2, pp.122-128, 1996.
DOI : 10.1016/S0022-3913(96)90087-6

M. Ayad, S. Rosentsiel, and M. Salama, Influence of tooth surface roughness and surface area on the retention of crowns luted with zinc orthophosphate cement, Austr Dent J, vol.32, pp.446-457, 1987.

A. Banerjee, T. Watson, and E. Kidd, Dentine caries excavation: a review of current clinical techniques, British Dental Journal, vol.188, issue.09, pp.476-82, 2000.
DOI : 10.1038/sj.bdj.4800515a

L. Baretieri, Esthetics: Direct Adhesive Restoration Of Fractured Anterior Teeth. São Paulo: Quintessence, 1998.

N. Barghi and T. Berry, Post-bonding Crack Formation in Porcelain Veneers, Journal of Esthetic and Restorative Dentistry, vol.5, issue.2, pp.51-55, 1997.
DOI : 10.1177/00220345840630121101

C. Bastian, The Porcelain Jacket Crown / Its Usefulness in Removable Bridgework, The Journal of the American Dental Association (1922), vol.13, issue.2, pp.226-266, 1926.
DOI : 10.14219/jada.archive.1926.0048

D. Belles, R. Cronin, . Jr, and E. Duke, Effect of metal design and technique on the marginal characteristics of the collarless metal ceramic restoration, The Journal of Prosthetic Dentistry, vol.65, issue.5, pp.611-620, 1991.
DOI : 10.1016/0022-3913(91)90193-Z

U. Belser, P. Magne, and M. , Ceramic Laminate Veneers: Continuous Evolution of Indications, Journal of Esthetic and Restorative Dentistry, vol.105, issue.4, pp.197-207, 1997.
DOI : 10.1016/0109-5641(94)90069-8

V. Bennani and C. Baudoin, Esthétique et profil d'émergence en implantologie, Paris : Édition CDP, 2000.

B. Bergman, A. Hugoson, and C. Olsson, Periodontal and Prosthetic Conditions in Patients Treated with Removable Partial Dentures and Artificial Crowns: A Longitudinal Two-Year Study, Acta Odontologica Scandinavica, vol.110, issue.10, pp.621-659, 1971.
DOI : 10.3109/00016356408993968

N. Bichacho, Cervical contouring concepts: enhancing the dentogingival complex. Pract Periodontics Aesthet Dent, pp.241-54, 1996.

G. Black, The management of enamel margins, Dent Cosmos, vol.33, pp.85-100, 1891.

R. Blackwell, A consideration of the location of gingival margin in cavity preparation, Northwestern University Bulletin, pp.4-7, 1940.

F. Blair, R. Wassell, and J. Steel, Crowns and other extra-coronal restorations:Preparations for full veneer crowns, British Dental Journal, vol.4, issue.10, pp.561-571, 2002.
DOI : 10.1111/j.1365-2842.1977.tb00984.x

J. Blanchard and Y. Lauverjat, Limites prothétiques et environnement gingival, Cah Prothèse, vol.94, pp.45-50, 1996.

P. Bonnard, M. Hermans, P. Adriaenssens, P. Daelemans, and C. Malevez, Anterior Esthetic Rehabilitation on Teeth and Dental Implants Optimized with Procera?? Technology: A Case Report, Journal of Esthetic and Restorative Dentistry, vol.76, issue.3, pp.163-71, 2001.
DOI : 10.1016/S0022-3913(97)70064-7

S. Boralévi, Optimisation de l'adaptation marginale de bridges entièrement céramique en alumine zircone, Thèse de 3 ème cycle, 1990.

M. Bottino, R. Farma, and L. Valandro, Perception: esthetics in metal-free prosthesis of natural teeth and implants, 2009.

P. Boudrias, E. Shoghikian, E. Morin, and P. Hutnik, Esthetic option for the implant-supported singletooth restoration --treatment sequence with a ceramic abutment, J Can Dent Assoc, 2001.

A. Brabant, Méthodologie clinique des préparations pour bridges collés, Réal Cliniq, vol.7, issue.4, pp.513-521, 1996.

H. Brandau, P. Yaman, and M. Molvar, effect of restorative procedures of a porcelain jacket crown on gingival health and height, Am J Dent, vol.1, pp.119-141, 1988.

S. Brecker, Porcelain baked to gold???A new medium in prosthodontics, The Journal of Prosthetic Dentistry, vol.6, issue.6, pp.801-811, 1956.
DOI : 10.1016/0022-3913(56)90077-4

A. Brunel, J. Leroux, and J. Payen, Rugosités de surface dues aux très grandes vitesses : conséquences cliniques, Actual Odontostomatol, vol.57, pp.73-85, 1962.

W. Buchanan, C. Svare, and K. Turner, The effect of repeated firings and strength on marginal distortion in two ceramometal systems, The Journal of Prosthetic Dentistry, vol.45, issue.5, p.502, 1981.
DOI : 10.1016/0022-3913(81)90035-4

J. Calamia, Etched porcelain facial veneers: a new treatment modality based on scientific and clinical evidence, N Y J Dent, vol.53, issue.6, pp.255-264, 1983.

J. Calamia, Etched porcelain veneers: the current state of the art, Quintessence Int, vol.16, issue.1, pp.5-12, 1985.

S. Campbell and L. Pelletier, Thermal cycling distortion of metal ceramics: Part I???Metal collar width, The Journal of Prosthetic Dentistry, vol.67, issue.5, p.603, 1992.
DOI : 10.1016/0022-3913(92)90155-4

S. Campbell and L. Pelletier, Thermal cycling distortion of metal ceramics: Part II???Etiology, The Journal of Prosthetic Dentistry, vol.68, issue.2, p.284, 1992.
DOI : 10.1016/0022-3913(92)90331-4

G. Carnevale, S. Sterrantino, D. Febo, and G. , Soft and hard tissue wound healing following tooth preparation to the alveolar crest, Int J Periodontics Restorative Dent, vol.3, pp.36-53, 1983.

F. Carranza, The effects of fillings and prosthetic appliances on the marginal gingival, Int Dent J, vol.23, issue.1, pp.64-72, 1973.

J. Carson, T. Rider, and D. Nash, A Thermographic Study of Heat Distribution During Ultra-Speed Cavity Preparation, Journal of Dental Research, vol.55, issue.7, pp.1681-1685, 1979.
DOI : 10.3109/00016355809064116

J. Castelnuovo, A. Tjan, and P. Liu, Microleakage of multi-step and simplified-step bonding systems, Am J Dent, vol.9, issue.6, pp.245-253, 1996.

J. Castelnuovo, A. Tjan, K. Phillips, and J. Nicholls, Fracture load and mode of failure of ceramic veneers with different preparations, The Journal of Prosthetic Dentistry, vol.83, issue.2, 2000.
DOI : 10.1016/S0022-3913(00)80009-8

G. Chiche and A. Pinault, Esthétique et restauration des dents antérieures. Paris : Editions CdP, 1995.

L. Cho, J. Choi, Y. Yi, and C. Park, Effect of finish line variants on marginal accuracy and fracture strength of ceramic optimized polymer/fiber-reinforced composite crowns, The Journal of Prosthetic Dentistry, vol.91, issue.6, pp.554-60, 2004.
DOI : 10.1016/j.prosdent.2004.03.004

G. Christensen and R. Christensen, Clinical Observations of Porcelain Veneers: A Three-Year Report, Journal of Esthetic and Restorative Dentistry, vol.12, issue.5, pp.174-179, 1991.
DOI : 10.1016/S0109-5641(88)80003-4

G. Christensen, Veneering of teeth. State of the art. Dent Clin North Am, pp.373-91, 1985.

S. Chu, J. Tan, C. Stappert, and D. Tarnow, Gingival Zenith Positions and Levels of the Maxillary Anterior Dentition, Journal of Esthetic and Restorative Dentistry, vol.4, issue.10, pp.113-133, 2009.
DOI : 10.1902/jop.1998.69.10.1124

D. Cohen and S. Ross, The Double Papillae Repositioned Flap in Periodontal Therapy, Journal of Periodontology, vol.1, issue.743, pp.65-70, 1968.
DOI : 10.1902/jop.1960.31.4.283

M. Comlekoglu, M. Dundar, M. Özcan, M. Gungor, B. Gokce et al., Influence of Cervical Finish Line Type on the Marginal Adaptation of Zirconia Ceramic Crowns, Operative Dentistry, vol.34, issue.5, pp.586-592, 2009.
DOI : 10.2341/08-076-L

R. Craig, M. El-ebrashi, and F. Peyton, Experimental stress analysis of dental restorations, The Journal of Prosthetic Dentistry, vol.17, issue.3, pp.292-302, 1967.
DOI : 10.1016/0022-3913(67)90093-5

B. Croll, Emergence profiles in natural tooth contour. Part I: Photographic observations, The Journal of Prosthetic Dentistry, vol.62, issue.1, pp.4-10, 1989.
DOI : 10.1016/0022-3913(89)90036-X

D. March, P. Launois, and C. , Bridge de longue portée :céramo-métallique ou tout céramique, Réal Cliniq, vol.18, issue.3, pp.249-61, 2007.

D. March, P. Samama, Y. Berthod, P. Corroy, A. Coudray et al., Reste-t-il encore de beaux jours aux procédés céramométalliques ?, Réal Clin, vol.21, issue.3, pp.157-166, 2010.

T. Degorce and J. Pennard, Le pilier UCLA (3i)) : Son utilisation en prothèse scellée, Syn Proth, vol.2, issue.3, pp.167-83, 2000.

P. Dehoff and K. Anusavice, Effect of Metal Design on Marginal Distortion of Metal-Ceramic Crowns, Journal of Dental Research, vol.75, issue.878, pp.1327-1358, 1984.
DOI : 10.1016/0022-3913(73)90007-3

G. Denehy and D. Howe, A conservative approach of the missing anterior tooth, Quintessence Int, vol.7, pp.23-29, 1979.

R. Deval, P. Lumley, M. Waplington, and L. Blunt, Cutting characteristics of a sonic root-end preparation instrument. Endod Dent Traumat, pp.96-99, 1996.

M. Dhilon, A. Fenton, and P. Watson, Bond strengths of composite to perforated and etched metal surfaces [abstract 1219], J Dent Res, vol.62, p.304, 1983.

D. Febo, G. Carnevale, G. Sterrantino, and S. , Treatment of a case of advanced periodontitis : Clinical procedures utilizing the " combined preparation " technique, Int J Periodontics Restorative Dent, vol.5, pp.52-62, 1985.

D. Dietschi and R. Spreafico, Restaurations esthétiques collées : composites et céramiques dans les traitements esthétiques des dents postérieures, Paris : Quintessence International, 1997.

M. Dimashkieh, Modified rotary design instruments for controlled finish line crown preparation, The Journal of Prosthetic Dentistry, vol.69, issue.1, pp.120-121, 1993.
DOI : 10.1016/0022-3913(93)90251-I

M. Doyle, C. Goodacre, C. Munoz, and C. Andres, The effect of tooth preparation design on the breaking strength of Dicor crowns: 3, Int J Prosthodont, vol.3, pp.327-367, 1990.

M. Dragoo and G. Williams, Periodontal tissue reactions to restorative procedures, Int J Periodontics Restorative Dent, vol.1, issue.1, pp.8-23, 1981.

C. Drisko, D. Cochran, and T. Blieden, Position paper: sonic and ultrasonic scalers in periodontics. Research, Science and Therapy Committee of the American Academy of Periodontology. Research, Science and Therapy Committee of the American Accademy of Periodontology, J Periodontol, 2000.

W. Eames and J. Nale, A Comparison of Cutting Efficiency of Air-Driven Fissure Burs, The Journal of the American Dental Association, vol.86, issue.2, p.412, 1973.
DOI : 10.14219/jada.archive.1973.0083

H. Eissmann, R. Radke, and W. Noble, Physiologic design criteria for fixed dental restorations, Dent Clin North Am, vol.15, pp.543-68, 1971.

M. El-ebrashi, R. Craig, and F. Peyton, Experimental stress analysis of dental restorations

I. Part, The concept of geometry of proximal margins, J Prosthet Dent, vol.22, issue.3, pp.333-378, 1969.

K. Elias, A. Amis, and D. Setchell, The magnitude of cutting forces at high speed, The Journal of Prosthetic Dentistry, vol.89, issue.3, 2003.
DOI : 10.1067/mpr.2003.35

M. Engleman, Simplified esthetic ceramo-metal restorations, NY J Dent, vol.49, pp.252-61, 1971.

J. Eshleman, H. Douglas, and D. Barnes, the acid etch bonded porcelain fused to metal fixed partial denture, Va Dent J, vol.56, pp.16-25, 1979.

Y. Estrabaud, Le profil d'émergence. Cah Prothèse, pp.97-104, 1994.

J. Farah and R. Craig, Stress Analysis of Three Marginal Configurations of Full Posterior Crowns by Three-Dimensional Photoelasticity, Journal of Dental Research, vol.50, issue.5, p.1219, 1974.
DOI : 10.1016/0021-9290(73)90009-2

R. Faucher and J. Nicholls, Distortion related to margin design in porcelain-fused-to-metal restorations, The Journal of Prosthetic Dentistry, vol.43, issue.2, pp.149-55, 1980.
DOI : 10.1016/0022-3913(80)90178-X

P. Ferran, J. Geoffrion, and J. Tarayre, Limite cervicale en prothèse scellée, Rev Odonto Stomatol Midi Fr, vol.1, pp.17-28, 1983.

M. Ferrari, S. Patroni, and P. Balleri, Measurement of enamel thickness in relation to reduction for etched laminate veneers, Int J Periodontics Restorative Dent, vol.12, issue.5, pp.407-420, 1992.

D. Fisher, A. Caputo, and H. Shillingburg, Photoelastic analysis of inlay and onlay preparations, The Journal of Prosthetic Dentistry, vol.33, issue.1, pp.47-54, 1975.
DOI : 10.1016/S0022-3913(75)80145-4

B. Fleiter and C. Launois, Préparations en présence de support parodontal réduit, Réal Cliniq, vol.7, issue.4, pp.533-546, 1996.

M. Freilich, E. Niekrash, R. Katz, and R. Simonen, Periodontal effects of fixed partial denture retainer margins: Configuration and location, The Journal of Prosthetic Dentistry, vol.67, issue.2, pp.184-193, 1992.
DOI : 10.1016/0022-3913(92)90450-O

M. Fuzzi and G. Rappelli, Les préparations pour inlays, onlays céramiques. Réal cliniq, pp.487-97, 1996.

J. Gage, Rationale for bevelled shoulder veneer crown preparations, Australian Dental Journal, vol.22, issue.6, pp.432-437, 1977.
DOI : 10.1111/j.1834-7819.1977.tb05146.x

G. Gagnot, F. Mora, M. Poblete, E. Vachey, J. Michel et al., Comparative study of manual and ultrasonic instrumentation of cementum surfaces: influence of lateral pressure, Int J Periodontics Restorative Dent, vol.24, issue.2, pp.137-182, 2004.

D. Galindo, C. Ercoli, and P. Funkenbusch, Tooth Preparation: A Study on the Effect of Different Variables and a Comparison Between Conventional and Channeled Diamond Burs, Journal of Prosthodontics, vol.74, issue.1, 2004.
DOI : 10.1177/00220345950740040901

E. Gankerseer and A. Walmsley, Preliminary Investigation into the Performance of a Sonic Scaler, Journal of Periodontology, vol.28, issue.11, pp.780-784, 1987.
DOI : 10.1016/0300-5712(86)90076-X

F. Gardner, Margins of complete crowns???Literature review, The Journal of Prosthetic Dentistry, vol.48, issue.4, pp.396-400, 1982.
DOI : 10.1016/0022-3913(82)90072-5

A. Gargiulo, F. Wentz, and B. Orban, Dimensions and Relations of the Dentogingival Junction in Humans, Journal of Periodontology, vol.22, issue.3, pp.261-268, 1961.
DOI : 10.1016/0030-4220(55)90268-1

J. Gavelis, J. Morency, E. Riley, and R. Sozio, The effect of various finish line preparations on the marginal seal and occlusal seat of full crown preparations, The Journal of Prosthetic Dentistry, vol.45, issue.2, pp.138-187, 1981.
DOI : 10.1016/0022-3913(81)90330-9

W. Geller and S. Kwiatkowski, The Willi's glas crown: a new solution in the dark and shadowed zones of esthetic porcelain restorations. Quintessence Dent Technol, pp.233-275, 1987.

H. Gilde, P. Lenz, and U. Richter, Experimentelle und statistiche untersuchungenzur präparationmethodik, Dtsch zähnarrztl Z, vol.39, pp.798-800, 1984.

R. Goldstein, Esthetic principles for ceramo-metal restorations, Dent Clin North Am, vol.21, pp.803-825, 1977.

C. Goodacre, W. Campagni, and S. Aquilino, Tooth preparations for complete crowns: An art form based on scientific principles, The Journal of Prosthetic Dentistry, vol.85, issue.4, 2001.
DOI : 10.1067/mpr.2001.114685

R. Grajower and I. Lewinstein, A mathematical treatise on the fit of crown castings, The Journal of Prosthetic Dentistry, vol.49, issue.5, 1983.
DOI : 10.1016/0022-3913(83)90393-1

R. Grajower, Y. Zuberi, and I. Lewinstein, Improving the fit of crowns with die spacers, The Journal of Prosthetic Dentistry, vol.61, issue.5, pp.555-63, 1989.
DOI : 10.1016/0022-3913(89)90275-8

G. Gürel, Les facettes en céramiques : de la théorie à la pratique, Paris : Quintessence International, 2005.

J. Harrison, Crown and bridge preparation design and use. Dent Clin Am, pp.185-93, 1966.

J. Harrison, Effect of retraction materials on the gingival sulcus epithelium, The Journal of Prosthetic Dentistry, vol.11, issue.3, p.514, 1961.
DOI : 10.1016/0022-3913(61)90234-7

J. Harter and E. Sarfati, Les préparations pour inlays et onlays métalliques scellés unitaires et moyens d'ancrage de bridge, Réal Cliniq, vol.7, issue.4, pp.499-512, 1996.

G. Heydecke, M. Sierraalta, and M. Razzoog, Evolution and use of aluminum oxide single-tooth implant abutments: a short review and presentation of two cases, Int J Prosthodont, vol.15, issue.5, pp.488-93, 2002.

R. Highton, A. Caputo, and J. Matyas, A photoelastic study of stresses on porcelain laminate preparations, The Journal of Prosthetic Dentistry, vol.58, issue.2
DOI : 10.1016/0022-3913(87)90168-5

H. Horn, Porcelain laminate veneers bonded to etched enamel. Dent Clin North Am, 1983.

D. Howe and G. Denehy, Anterior fixed partial dentures utilizing the acid-etch technique and a cast metal framework, The Journal of Prosthetic Dentistry, vol.37, issue.1, pp.28-31, 1977.
DOI : 10.1016/0022-3913(77)90187-1

B. Hugo, A. Lussi, and P. Hotz, Die präparation Schmelzabschrägung bei approximalen Kavitäten, Schweiz Monatsschr Zahnmed, vol.102, pp.1181-1188, 1992.

B. Hugo, A. Stassinakis, and P. Hotz, Die randqualität der Schmelzabschrägung bei adhasiven Klasse-IIminika-vitäten in vivo, Deutsche Zahnärtzliche Zeitschrift, vol.50, pp.832-835, 1995.

B. Hugo and A. Stassinakis, Preparation and restoration of small interproximal carious lesions with sonic instruments. Pract Periodontics Aesthet Dent, 1998.

Y. Ichikawa, Y. Akagawa, H. Nikai, and H. Tsuru, Tissue compatibility and stability of a new zirconia ceramic in vivo, The Journal of Prosthetic Dentistry, vol.68, issue.2, pp.322-328, 1992.
DOI : 10.1016/0022-3913(92)90338-B

L. Jameson, Comparison of the volume of crevicular fluid from restored and nonrestored teeth, The Journal of Prosthetic Dentistry, vol.41, issue.2, pp.209-223, 1979.
DOI : 10.1016/0022-3913(79)90309-3

M. Janota, Use of scanning electron microscopy for evaluating diamond points, The Journal of Prosthetic Dentistry, vol.29, issue.1, p.88, 1973.
DOI : 10.1016/0022-3913(73)90145-5

T. Jemt, Customized titanium single-implant abutments: 2-year follow-up pilot study, Int J Prosthodont, vol.11, issue.4, pp.312-318, 1998.

D. Johnson and R. Stratton, Fondamentals of removable Prosthodontics, p.219, 1980.

J. Johnson, Gingival margin termination, US Navy Med, vol.63, issue.6, pp.41-44, 1974.

M. Jung and H. Pantke, The effect of diamond grinding instrument of different grit on dental hard tissue, Dtsch Stomatol, vol.41, issue.9, pp.320-322, 1991.

K. Karlsen, Gingival Reactions to Dental Restorations, Acta Odontologica Scandinavica, vol.76, issue.6, pp.895-904, 1970.
DOI : 10.14219/jada.archive.1957.0120

L. Kassis and G. Deyrolle, Situation et forme de contour des limites cervicales des préparations. Cah Prothèse, pp.35-53, 1973.

M. Kern, J. Strub, and X. Lü, Wear of composite resin veneering materials in a dual-axis chewing simulator, Journal of Oral Rehabilitation, vol.26, issue.5, pp.372-380, 1999.
DOI : 10.1046/j.1365-2842.1999.00416.x

K. Kimmel, Verfahren und problem der oralmedizinischen präparationstechniks

S. Kina and A. Bruguera, Invisible ceramic esthetic restorations, Sao Paulo: Artes Medicas (Dentistry), 2008.

C. Knellesen, Simplification dans la préparation de la couronne coulée. Cah Prothese, pp.127-160, 1973.

T. Kocher and H. Plagmann, Heat propagation in dentin during instrumentation with different sonic scaler tips, Quintessence Int, vol.27, issue.4, pp.259-64, 1996.

T. Kocher and H. Plagmann, The diamond coated sonic scaler tip part I : oscillation pattern of different sonic scaler inserts, Int J Periodont Rest Dent, vol.17, pp.393-402, 1997.

T. Kocher and H. Plagmann, The diamond-coated sonic scaler tip. Part II: Loss of substance and alteration of root surface texture after different scaling modalities, Int J Periodontics Restorative Dent, vol.17, issue.5, pp.484-93, 1997.

P. Koidis, K. Schroeder, W. Johnston, and W. Campagni, Color consistency, plaque accumulation, and external marginal surface characteristics of the collarless metal-ceramic restoration, The Journal of Prosthetic Dentistry, vol.65, issue.3, pp.391-400, 1991.
DOI : 10.1016/0022-3913(91)90231-K

J. Kois, Altering Gingival Levels: The Restorative Connection Part I: Biologic Variables, Journal of Esthetic and Restorative Dentistry, vol.6, issue.1, pp.3-9, 1994.
DOI : 10.1902/jop.1961.32.3.261

J. Kois, New paradigms for anterior tooth preparation. Rationale and technique. Oral Health, pp.19-22, 1998.

D. Koth, Full crown restorations and gingival inflammation in a controlled population, The Journal of Prosthetic Dentistry, vol.48, issue.6, pp.681-686, 1982.
DOI : 10.1016/S0022-3913(82)80028-0

I. Krejci, D. Dietschi, and F. Lutz, Principles of proximal cavity preparation and finishing with ultrasonic diamond tips. Pract Periodontics Aesthet Dent, pp.295-303, 1998.

. Kuhlke-kl and D. Drennon, An alternative to the anterior single tooth removable partial denture, J Int Assos Dent Child, vol.8, issue.1, pp.11-16, 1977.

M. Kuwata, Atlante a colori sulla tecnologia delle recostruzioni ceramo-metalliche, Utet, vol.2, pp.235-50, 1989.

M. Kuwata, Théorie et pratique des restaurations céramo-métalliques, 1982.

G. Laborde, A. Borghetti, M. Gilardenghi, and J. Heraud, Réalisation et accès aux limites intrasulculaires : vers la stabilité du parodonte marginal, Cah Prothèse, vol.62, pp.7-17, 1988.

P. Laforgia, V. Milano, C. Morea, and A. Desiate, Temperature change in the pulp chamber during complete crown preparation, The Journal of Prosthetic Dentistry, vol.65, issue.1, pp.56-61, 1991.
DOI : 10.1016/0022-3913(91)90048-2

C. Land, A new system of restoring badly decayed teeth by means of an enameled metallic coating, Independent Pract, vol.7, pp.407-416, 1886.

C. Land, Metallic enamel sections. A new system for filling teeth, Independent Pract, vol.8, pp.87-90, 1887.

N. Lang, R. Kiel, and K. Anderhalden, Clinical and microbiological effects of subgingival restorations with overhanging or clinically perfect margins, Journal of Clinical Periodontology, vol.55, issue.6, pp.563-78, 1983.
DOI : 10.14219/jada.archive.1957.0142

N. Lang and B. Siegrist-guldener, Atlas de médecine dentaire : couronnes et bridges, Editions Flammarion, 1996.

K. Langeland and L. Langeland, Cutting procedures with minimized trauma. J Am Dent Assoc, 1968.
DOI : 10.14219/jada.archive.1968.0181

D. Larato, The effect of crown margin extension on gingival inflammation, J South Calif Dent Assos, vol.37, pp.476-484, 1969.

H. Lauer, E. Kraft, W. Rothlauf, and T. Zwingers, Effects of the temperature of cooling water during high-speed and ultrahigh-speed tooth preparation, The Journal of Prosthetic Dentistry, vol.63, issue.4, pp.407-421, 1990.
DOI : 10.1016/0022-3913(90)90228-5

B. Laufer, R. Pilo, and H. Cardash, Surface roughness of tooth shoulder preparations created by rotary instrumentation, hand planing, and ultrasonic oscillation, The Journal of Prosthetic Dentistry, vol.75, issue.1, pp.4-8, 1996.
DOI : 10.1016/S0022-3913(96)90410-2

C. Launois and J. Schittly, L'épaulement chanfreiné : étude comparative des états de surface créés par des fraises d'utilisation courante, Cah Prothèse, vol.37, pp.39-48, 1982.

L. Laureil and B. Petterssen, Sonic scaler versus hand instruments, Swed Dent J, vol.12, pp.187-92, 1988.

S. Lewis, J. Beumer, G. Perri, and W. Hornburg, Single tooth implant supported restorations, Int J Oral Maxillofac Implants. Spring, vol.3, issue.1, pp.25-30, 1988.

G. Livaditis, Cast Metal Resin-Bonded Retainers for Posterior Teeth, The Journal of the American Dental Association, vol.101, issue.6, pp.926-935, 1980.
DOI : 10.14219/jada.archive.1980.0439

H. Löe and J. Silness, Tissue reactions to string packs used in fixed restorations, The Journal of Prosthetic Dentistry, vol.13, issue.2, p.318, 1963.
DOI : 10.1016/0022-3913(63)90177-X

H. Löe, reactions of marginal periodontal tissues to restorative procedures, Int Dent J, vol.18, issue.4, pp.759-78, 1968.

R. London, The esthetic effects of implant platform selection, Compend Contin Educ Dent, vol.22, issue.683, pp.675-82, 2001.

A. Lussi, B. Hugo, and P. Hotz, Einfluss zweier finierungsmeden auf die Mikromorphologie des approximalen Kastenrandes, Schweiz Monatsschr Zahnmed, vol.102, pp.1175-1180, 1992.

R. Luthardt, M. Holzhüter, O. Sandkuhl, V. Herold, J. Schnapp et al., Reliability and Properties of Ground Y-TZP-Zirconia Ceramics, Journal of Dental Research, vol.81, issue.7, pp.487-91, 2002.
DOI : 10.1016/S0955-2219(97)00202-1

B. Magne and U. Belser, Les préparations coronaires périphériques, Réal Cliniq, vol.7, issue.4, pp.447-457, 1996.

P. Magne and U. Belser, Restaurations adhésives en céramique sur les dents antérieures : approche biomimétique, Paris : Quintessence International, 2003.

P. Magne and W. Douglas, Design optimization and evolution of bonded ceramics for the anterior dentition: a finite-element analysis, Quintessence Int, vol.30, issue.10, pp.661-72, 1999.

P. Magne, K. Kwon, U. Belser, J. Hodges, and W. Douglas, Crack propensity of porcelain laminate veneers: A simulated operatory evaluation, The Journal of Prosthetic Dentistry, vol.81, issue.3
DOI : 10.1016/S0022-3913(99)70277-5

P. Magne, M. Magne, and U. Belser, Natural and Restorative Oral Esthetics Part II: Esthetic Treatment Modalities, Journal of Esthetic and Restorative Dentistry, vol.23, issue.6, pp.239-285, 1993.
DOI : 10.1016/S0022-3913(89)80037-X

P. Magne, R. Perroud, J. Hodges, and U. Belser, Clinical performance of novel-design porcelain veneers for the recovery of coronal volume and length, Int J Periodontics Restorative Dent, 2000.

P. Magne, A. Versluis, and W. Douglas, Effect of luting composite shrinkage and thermal loads on the stress distribution in porcelain laminate veneers, The Journal of Prosthetic Dentistry, vol.81, issue.3, pp.335-379, 1999.
DOI : 10.1016/S0022-3913(99)70278-7

K. Malament and S. Socransky, Survival of Dicor glass-ceramic dental restorations over 14 years. Part II: Effect of thickness of Dicor material and design of tooth preparation, The Journal of Prosthetic Dentistry, vol.81, issue.6, pp.662-669, 1999.
DOI : 10.1016/S0022-3913(99)70104-6

C. Marchack, Fabrication of a digitally scanned, custom-shaped abutment: A clinical report, The Journal of Prosthetic Dentistry, vol.85, issue.2, pp.113-118, 2001.
DOI : 10.1067/mpr.2001.113627

J. Marcum, The effect of crown marginal depth upon gingival tissue, The Journal of Prosthetic Dentistry, vol.17, issue.5, pp.479-87, 1967.
DOI : 10.1016/0022-3913(67)90146-1

M. Martignoni and A. Shonenberger, Precision Fixed Prosthodontics: Clinical and Laboratory aspects, Chicago: Quintessence, 1990.

D. Massironi and A. Battistelli, Sistema di preparazione per corone complete, Masson Protech, vol.3, pp.35-47, 2000.

D. Massironi, R. Pascetta, and G. Romeo, Precision in dental esthetics : clinical and laboratory procedures

F. Mauny, M. Sadoun, and X. Daniel, Les préparations coronaires périphériques pour procédés céramocéramique, Réal Cliniq, vol.7, issue.4, pp.459-470, 1996.

R. Mckay, Evolution of tooth cutting techniques and its influence on restorative dentistry, The Journal of Prosthetic Dentistry, vol.8, issue.5, p.843, 1958.
DOI : 10.1016/0022-3913(58)90105-7

J. Mclean and A. Wilson, Butt joint versus bevelled gold margin in metalceramic crowns, Journal of Biomedical Materials Research, vol.22, issue.3, pp.239-50, 1980.
DOI : 10.14219/jada.archive.1959.0249

J. Mclean, The science and art of dental ceramics. Bridge design and laboratory procedures in dental ceramics, Chicago: Quintessence, 1980.

I. Miller and M. Belsky, The full shoulder preparation for periodontal health. Dent Clin North Am, pp.83-102, 1965.

N. Nakabayashi, Adhesive resins to hard tissues

M. Nevins, Attached gingival-mucogingival therapy and restorative dentistry, Int J Periodontics Restorative Dent, vol.6, pp.9-27, 1986.

G. Newcomb, The Relationship Between the Location of Subgingival Crown Margins and Gingival Inflammation, Journal of Periodontology, vol.14, issue.3, pp.151-155, 1974.
DOI : 10.1902/jop.1943.14.1.34

A. Nielsen, J. Richards, and R. Wolcott, Ultrasonic dental cutting instrument:I. J Am Dent Assos, pp.392-401, 1955.
DOI : 10.14219/jada.archive.1955.0077

S. Nyman and J. Lindhe, A Longitudinal Study of Combined Periodontal and Prosthetic Treatment of Patients With Advanced Periodontal Disease, Journal of Periodontology, vol.17, issue.4, pp.163-172, 1979.
DOI : 10.1111/j.1365-2842.1976.tb00949.x

B. Ohlmann, R. Gruber, G. Eickemeyer, and P. Rammelsberg, Optimizing preparation design for metal-free composite resin crowns, The Journal of Prosthetic Dentistry, vol.100, issue.3, pp.211-219, 2008.
DOI : 10.1016/S0022-3913(08)60180-8

M. Olsson and J. Lindhe, Periodontal characteristics in individuals with varying form of the upper central incisors, Journal of Clinical Periodontology, vol.14, issue.1, pp.78-82, 1991.
DOI : 10.1016/0022-3913(61)90181-0

C. Oman and E. Applebaum, Ultrasonic cavity preparation II. Progress report, The Journal of the American Dental Association, vol.50, issue.4, pp.414-421, 1955.
DOI : 10.14219/jada.archive.1955.0072

D. Orkin, J. Reddy, and D. Bradshaw, The relationship of the position of crown margins to gingival health, The Journal of Prosthetic Dentistry, vol.57, issue.4, pp.421-425, 1987.
DOI : 10.1016/0022-3913(87)90006-0

V. Ostlund, Cavity design and mathematics: Their effects on gaps at the margins of cast restorations, Oper Dent, vol.10, pp.122-159, 1985.

P. Ottl and H. Lauer, Temperature response in the pulpal chamber during ultrahigh-speed tooth preparation with diamond burs of different grit, The Journal of Prosthetic Dentistry, vol.80, issue.1, pp.12-21, 1998.
DOI : 10.1016/S0022-3913(98)70085-X

S. Pama-benfenati, P. Fugazzotto, P. Ferreira, M. Ruben, and G. Kramer, The effect of restorative margins on the postsurgical development and nature of the periodontium. Part II. Anatomical considerations, Int J Periodontics Restorative Dent, vol.6, issue.1, pp.64-75, 1986.

M. Parker, K. Malone, A. Trier, and T. Striano, Evaluation of resistance form for prepared teeth, The Journal of Prosthetic Dentistry, vol.66, issue.6, pp.730-733, 1991.
DOI : 10.1016/0022-3913(91)90404-K

D. Pascoe, Analysis of the geometry of finishing lines for full crown restorations, The Journal of Prosthetic Dentistry, vol.40, issue.2, pp.157-62, 1978.
DOI : 10.1016/0022-3913(78)90008-2

S. Paul, Adhesive luting procedures, Berlin : Quintessence, pp.67-110, 1997.

M. Perel, Axial crown contours, The Journal of Prosthetic Dentistry, vol.25, issue.6, pp.642-651, 1971.
DOI : 10.1016/0022-3913(71)90127-2

S. Perelmuter, F. Duret, F. Lelievre, A. Lecardonnel, and R. Cheron, La prothèse céramo-céramique par CFAO, Paris : Quintessence International, 2009.

S. Perelmuter and F. Liger, nouvelles conception des preparations pour couronnes céramo-métalliques : une démarche logique. Cah Prothese, 1983.

Y. Petitjean and J. Schittly, Les empreintes en prothèse fixée, Editions CdP, 1994.

R. Phillips, Skinner's science of dental materials, pp.563-581, 1982.

G. Plotino, C. Pameijer, N. Grande, and F. Somma, Ultrasonics in Endodontics: A Review of the Literature, Journal of Endodontics, vol.33, issue.2, pp.81-95, 2007.
DOI : 10.1016/j.joen.2006.10.008

C. Pradines, Infrastructures de bridges en zircone Y- TZP : de la conception aux applications, Thèse : Chirurgie dentaire

J. Preston, Rational approach to tooth preparation for ceramo-metal restorations, Dent Clin North Am, vol.21, pp.683-98, 1977.

R. Price and E. Sutow, Micrographic and profilometric evaluation of the finish produced by diamond and tungsten carbide finishing burs on enamel and dentin, The Journal of Prosthetic Dentistry, vol.60, issue.3, 1988.
DOI : 10.1016/0022-3913(88)90275-2

J. Prothero, Prosthetic dentistry. Chicago: Medico-dental publishing Co, p.742, 1923.

A. Qualtrough, A. Cramer, N. Wilson, J. Roulet, and M. Noack, An in vitro evaluation of the marginal integrity of a porcelain inlay system, Int J Prosthodont, vol.4, issue.6, pp.517-540, 1991.

P. Rammelsberg, G. Eickemeyer, K. Erdelt, and P. Pospiech, Fracture resistance of posterior metal-free polymer crowns, The Journal of Prosthetic Dentistry, vol.84, issue.3, pp.303-311, 2000.
DOI : 10.1067/mpr.2000.108068

M. Ramp, M. Mccracken, and R. Mazer, Tooth structure loss apical to preparations for fixed partial dentures when using self-limiting burs, The Journal of Prosthetic Dentistry, vol.79, issue.5, pp.491-495, 1998.
DOI : 10.1016/S0022-3913(98)70167-2

M. Ramp, S. Suzuki, and C. Cox, Tooth structure loss apical to preparations for fixed partial dentures when using self-limiting burs, The Journal of Prosthetic Dentistry, vol.79, issue.5, pp.523-553, 1997.
DOI : 10.1016/S0022-3913(98)70167-2

W. Reeves, Restorative margin placement and periodontal health, The Journal of Prosthetic Dentistry, vol.66, issue.6, 1991.
DOI : 10.1016/0022-3913(91)90405-L

H. Renggli and B. Regolati, Gingival inflammation and plaque accumulation by well-adapted supragingival and subgingival proximal restorations, Helv Odontol Acta, vol.16, pp.99-101, 1962.

J. Richardson, Practical treatise on mechanical dentistry. Philadelphia: Lindsay and Blackiston, p.1880

W. Richter and H. Ueno, Relationship of crown margin placement to gingival inflammation, The Journal of Prosthetic Dentistry, vol.30, issue.2, pp.156-61, 1973.
DOI : 10.1016/0022-3913(73)90050-4

?. Richter, K. Snapp, S. Aquilino, C. Svare, and K. Turner, Change in marginal fit as related to margin design, alloy type, and porcelain proximity in porcelain-fused-to-metal restorations, The Journal of Prosthetic Dentistry, vol.60, issue.4, pp.435-444, 1988.
DOI : 10.1016/0022-3913(88)90243-0

C. Robin, G. Antonioli, and P. Magne, Préparation des piliers, Cah Prothèse, vol.96, pp.27-33, 1996.

A. Rochette, Attachment of a splint to enamel of lower anterior teeth, The Journal of Prosthetic Dentistry, vol.30, issue.4, pp.418-441, 1973.
DOI : 10.1016/0022-3913(73)90163-7

H. Rosen, Operative procedures on mutilated endodontically treated teeth, The Journal of Prosthetic Dentistry, vol.11, issue.5, pp.973-986, 1961.
DOI : 10.1016/0022-3913(61)90158-5

S. Rosenstiel, M. Land, and J. Fugimoto, Contemporary fixed prosthondontics, 1999.

D. Rosner, Function, placement, and reproduction of bevels for gold castings, The Journal of Prosthetic Dentistry, vol.13, issue.6, pp.1160-1166, 1963.
DOI : 10.1016/0022-3913(63)90268-3

R. Harter and J. , Aspects biologiques des limites cervicales en prothèse fixée, Cah Prothèse, vol.29, pp.43-61, 1980.

C. Rufenacht, Fondamentals of esthetics, Chicago : Quintessence, 1990.

T. Salinas and A. Sadan, Establishing soft tissue integration with natural tooth-shaped abutments. Pract Periodontics Aesthet Dent, pp.35-42, 1998.

W. Saunders, Resin bonded bridgework: a review, Journal of Dentistry, vol.17, issue.6, pp.255-65, 1989.
DOI : 10.1016/0300-5712(89)90030-4

J. Schittly and P. Russe, Évaluation Clinique d'une nouvelle interface implant/prothèse, Implant, vol.5, issue.1, pp.21-24, 1999.

J. Schittly and P. Russe, Les implants Spline®. Paris : Édition CdP, 2002.

J. Schittly, Étude expérimentale du joint dentoprothétique en prothèse scellée. 1 ère partie : Incidence du type de limite cervicale et de l'espacement des maquettes de cire sur l'adaptation des couronnes coulées après scellement, Cah Prothèse, vol.39, pp.23-41, 1982.

J. Schittly, L'adaptation des éléments scellés en prothèse. Étude expérimentale, Thèse de 3ème cycle, 1979.

M. Schlee, M. Steigmann, E. Bratu, and A. Garg, Piezosurgery: basics and possibilities. Implant Dent, pp.334-374, 2006.
DOI : 10.1097/01.id.0000247859.86693.ef

URL : http://www.steigmann-institute.com/data/pdf/steigmann_info_18.pdf

A. Schuchard and . Watkinsec, Cutting effectiveness of tungsten carbide burs and diamond points at ultra-high rotational speeds, The Journal of Prosthetic Dentistry, vol.18, issue.1, p.58, 1967.
DOI : 10.1016/0022-3913(67)90112-6

T. Schulein, The era of high speed development in dentistry, J Hist Dent, vol.50, issue.3, pp.131-138, 2002.

P. Shaerer, T. Sato, and A. Wohlend, A comparison of the marginal fit of three cast ceramic crown systems, The Journal of Prosthetic Dentistry, vol.59, issue.5
DOI : 10.1016/0022-3913(88)90065-0

H. Shillingburg, S. Hobo, and D. Fisher, Preparation design and margin distortion in porcelain-fused-to-metal restorations, The Journal of Prosthetic Dentistry, vol.29, issue.3, pp.276-84, 1973.
DOI : 10.1016/0022-3913(73)90007-3

H. Shillingburg, S. Hobo, L. Whitsett, R. Jacobi, and S. Brackett, Bases fondamentales en prothèse fixée, 3ème édition, Editions CdP, 1998.

H. Shillingburg, R. Jacobi, and S. Brackett, Les préparations en prothèse fixée: principes et applications cliniques, Paris : Editions CdP, 1988.

S. Siegel, V. Frauhofer, and J. , ASSESSING THE CUTTING EFFICIENCY OF DENTAL DIAMOND BURS, The Journal of the American Dental Association, vol.127, issue.6, pp.7763-772, 1996.
DOI : 10.14219/jada.archive.1996.0312

S. Siegel, V. Fraunhofer, and J. , CUTTING EFFICIENCY OF THREE DIAMOND BUR GRIT SIZES, The Journal of the American Dental Association, vol.131, issue.12, pp.1706-1716, 2000.
DOI : 10.14219/jada.archive.2000.0116

S. Siegel and J. Von-fraunhofer, Dental Cutting with Diamond Burs: Heavy-Handed or Light-Touch?, Journal of Prosthodontics, vol.66, issue.1, pp.3-9, 1999.
DOI : 10.14219/jada.archive.1973.0083

J. Silness, Fixed prosthodontics and periodontal health. Dent Clin North Am. Dent Clin North Am, pp.317-346, 1980.

J. Silness, Periodontal conditions in patients treated with dental bridges., Journal of Periodontal Research, vol.27, issue.3, pp.219-243, 1970.
DOI : 10.1902/jop.1956.27.4.284

Y. Simonpaoli, Atlas de prothèse céramo-nickel, 1985.

S. Slocum, The technic of porcelain jacket crowns and the relationship to periodontia, Dent Digest, vol.31, pp.239-282, 1925.

B. Smith, The effect of the surface roughness of prepared dentin on the retention of castings, The Journal of Prosthetic Dentistry, vol.23, issue.2, pp.187-197, 1970.
DOI : 10.1016/0022-3913(70)90296-9

B. Smith, Couronnes et bridges : conception réalisation, 1988.

E. Smyd, Advanced Thought in Indirect Inlay and Fixed Bridge Fabrication Part I, The Journal of the American Dental Association, vol.31, issue.11, pp.759-68, 1944.
DOI : 10.14219/jada.archive.1944.0178

M. Sous, Y. Lepetitcorp, J. Lasserre, and N. Six, Pénétration Sulculaire ultrasonore : une nouvelle approche pour les préparations coronaires périphériques, Int Perio Rest Dent, vol.29, issue.3, pp.277-287, 2009.

R. Sozio and D. Riley, A precision ceramic-metal restoration with a facial butted margin, The Journal of Prosthetic Dentistry, vol.37, issue.5, pp.517-538, 1977.
DOI : 10.1016/0022-3913(77)90164-0

R. Sozio, The marginal aspect of the ceramo-metal restoration: the collarless ceramo-metal restoration.Dent Clin North Am, 1977.

E. Spalding, Replacing the entire natural enamel with porcelain, Dent Items Int, vol.26, pp.401-411, 1904.

R. Stein and I. Glickman, prosthetics considerations essential for the gingival heakth, Dent Clin North Am, vol.4, p.177, 1960.

R. Stein and M. Kuwata, A dentist and a dental technician analyse current ceramometal procedures. Protes Dent, pp.25-31, 1985.

R. Stein, Periodontal dictates for esthetic ceramometal crowns, The Journal of the American Dental Association, vol.115, 1987.
DOI : 10.14219/jada.archive.1987.0320

H. Strating, C. Pameijer, and R. Gildenhuys, Evaluation of the marginal integrity of ceramometal restorations. Part I, The Journal of Prosthetic Dentistry, vol.46, issue.1, 1981.
DOI : 10.1016/0022-3913(81)90136-0

H. Su, O. Gonzalez-martin, A. Weisgold, and E. Lee, Considerations of implant abutment and crown contour: Critical contour and subcritical contour, Int J Periodontics Rest Dent, vol.30, issue.4, pp.335-378, 2010.

E. Symid, Dental engineering applied to inlay and fixed bridgde fabrication, J Prosthet Dent, vol.2, pp.536-542, 1952.

D. Tarnow, S. Stahl, A. Magner, and J. Zamzok, Human gingival attachment responses to subgingival crown placement Marginal remodelling, Journal of Clinical Periodontology, vol.24, issue.6, pp.563-572, 1986.
DOI : 10.1902/jop.1953.24.3.172

G. Toogood and J. Archibald, Technique for establishing porcelain margins, The Journal of Prosthetic Dentistry, vol.40, issue.4, pp.464-470, 1978.
DOI : 10.1016/0022-3913(78)90134-8

B. Touati, P. Miara, and D. Nathanson, Dentisterie esthétique et restaurations en céramique, Editions CdP, 1999.

B. Touati, À propos d'une limite cervicale : le congé, Cah Prothèse, vol.21, pp.67-72, 1978.

A. Tripodakis, J. Strub, H. Kappert, and S. Witkowski, Strength and mode of failure of single implant all-ceramic abutment restorations under static load, Int J Prosthodont, vol.8, issue.3, pp.265-72, 1995.

J. Tunkel, A. Heinecke, and T. Flemmig, A systematic review of efficacy of machine-driven and manual subgingival debridement in the treatment of chronic periodontitis, Journal of Clinical Periodontology, vol.62, issue.s3, pp.72-81, 2002.
DOI : 10.1902/jop.1991.62.12.750

M. Tuntiprawon, Effect of tooth surface roughness on marginal seating and retention of complete metal crowns, The Journal of Prosthetic Dentistry, vol.81, issue.2, pp.142-147, 1999.
DOI : 10.1016/S0022-3913(99)70241-6

F. Unger, Concepts clinique en esthétique et prothèse implantaire, Paris : Éd SNPMD, 2005.

F. Unger, Concepts cliniques en prothèse implantaire, Paris : Éd SNPMD, 2001.

J. Valderhaug and J. Birkeland, Periodontal conditions in patients 5 years following insertion of fixed prostheses., Journal of Oral Rehabilitation, vol.27, issue.3, pp.237-280, 1976.
DOI : 10.1902/jop.1956.27.4.284

J. Valderhaug, Periodontal conditions and carious lesions following the insertion of fixed prostheses: a 10-year follow-up study, Int Dent J, 1980.

A. Vanderlei, A. Borges, B. Cavalcanti, and S. Rode, Ultrasonic versus high-speed cavity preparation: Analysis of increases in pulpal temperature and time to complete preparation, The Journal of Prosthetic Dentistry, vol.100, issue.2, pp.107-116, 2008.
DOI : 10.1016/S0022-3913(08)60158-4

W. Vehe, Some basic principles underlying porcelain veneer crown technic, J Am Dent Assoc, vol.17, pp.2167-76, 1930.

J. Waerhaug, histologic considerations which govern where the margin of restauration should be located in relation to the gingival, Dent Clin North Am, vol.4, pp.161-76, 1960.

J. Waerhaug, Tissue Reactions Around Artificial Crowns, Journal of Periodontology, vol.48, issue.3, pp.172-85, 1953.
DOI : 10.1177/00220345330130060601

K. Wannfors and J. Smedberg, A prospective clinical evaluation of different single-tooth restoration designs on osseointegrated implants. A 3-year follow-up of Branemark implants., Clinical Oral Implants Research, vol.10, issue.6, pp.453-461, 1999.
DOI : 10.1034/j.1600-0501.1999.100603.x

U. Wegmann, Quality of ground enamel surfaces and preparation margins], Dtsch Zahnarztl Z, 1985.

A. Weisgold, Contours of the full crown restoration. Alpha Omega, pp.77-89, 1977.

P. Weiss, Vers une reconciliation esthétique des restaurations céramo-métalliques avec la santé des tissus mous. Rev Int Parodont Dent Rest, 1981.

R. Wilson, Intracrevicular restorative dentistry, J Int Periodont Rest Dent, vol.1, pp.35-49, 1981.

M. Wise and R. Dykema, The plaque-retaining capacity of four dental materials, The Journal of Prosthetic Dentistry, vol.33, issue.2, pp.178-90, 1975.
DOI : 10.1016/S0022-3913(75)80108-9

A. Wohlwend, S. Studer, and P. Scharer, The zirconium oxide abutment: an all-ceramic abutment for the esthetic improvement for implant superstructures. QDT, pp.63-74, 1997.

M. Yildirim, H. Fischer, R. Marx, and D. Edelhoff, In vivo fracture resistance of implant-supported allceramic restorations, J Prosthet Dent, 2003.

R. Zena, Z. Khan, and V. Fraunhoferja, Shoulder preparations for collarless metal ceramic crowns: Hand-planing as opposed to rotary instrumentation, The Journal of Prosthetic Dentistry, vol.62, issue.3
DOI : 10.1016/0022-3913(89)90331-4

A. Satelec®-catalogue-en-ligne-odontologie-conservcatrice and . Restauratrice, Ankylos Dentsply catalogue en ligne : Ankylos® Product Catalog : http://www.dentsplyfriadent .com/downloads/ANKYLOS_Katalog_en.pdf c. Astra catalogue en ligne : catalogue produits, 2011.

. Friadent®-catalogue-en-ligne, Catalogue produits : http://www.dentsplyfriadent .com/downloads/A_ProdCat_FR_005.pdf f. EMS catalogue en ligne : Swiss Instruments Brochure FR : http://www.ems-company.com/media/NEW%20FA- Light/SWISS%20INSTRUMENTS_Brochure_FR.pdf g. Komet catalogue en ligne

N. Biocare-catalogue-en-ligne, Catalogue produits Straumann catalogue en ligne : La restauration par couronnes et bridges, système prothétique synOcta Straumann® : http://www.straumann.fr/pc_15x_255_crown_bridge_synocta.pdf k. Straumann catalogue en ligne : La solution monobloc personnalisable pour couronnes et bridges, partie secondaire en or Straumann® synOcta® RN/WN : http://www.straumann.fr/pc_15x_xxx_rn_wn_synocta_gold_abutment.pdf l. Straumann catalogue en ligne : Restauration par couronnes et bridges scellés avec le système des piliers pleins : http://www.straumann.fr/pc_15x_254_crown_and_bridge_restorations.pdf m. Straumann catalogue en ligne : Restaurations prothétiques pour implant Narrow Neck : http://www.straumann.fr/pc_15x_305_nni.pdf n. Zimmer catalogue en ligne : Système d'implants Spline®, 2011.