P. I. Branemark, Osseointegrated implants in the treatment of the edentulous jaw. Experience from a 10-year period, Scand J Plast Reconstr Surg, issue.16, pp.1-132, 1977.

P. I. Branemark, B. Svensson, and D. Van-steenberghe, Ten-year survival rates of fixed prostheses on four or six implants ad modum Branemark in full edentulism, Clinical Oral Implants Research, vol.6, issue.4, pp.227-258, 1995.
DOI : 10.1034/j.1600-0501.1995.060405.x

M. Davarpanah, S. Szmukler-moncler, P. Khoury, B. Jakubowicz-kohen, and H. Martinez, Manuel d'implantologie clinique -Concepts, protocoles et innovations récentes. CdP - 2è édition Rueil-Malmaison, 2008.

P. Trisi and W. Rao, Bone classification: clinical-histomorphometric comparison, Clin Oral Implants Res, vol.10, issue.1, pp.1-7, 1999.

P. Trisi, W. Rao, and A. Rebaudi, A histometric comparison of smooth and rough titanium implants in human low-density jawbone, Int J Oral Maxillofac Implants, vol.14, issue.5, pp.689-98, 1999.

F. Smeacetto, S. Szmukler-moncler, and M. Ferraris, Protective coatings for induction casting of titanium, Surface and Coatings Technology, vol.201, issue.24, pp.9541-9548, 0201.
DOI : 10.1016/j.surfcoat.2007.04.027

C. Grosjean and C. , Les états de surface en implantologie et leur influence sur l'ostéo-intégration, Thèse d'exercice de Chirurgie dentaire : Nancy : 2003. 142p. 8. Stainless Steel World. Le titane dans les applications médicales, 2003.

. Disponible-sur, www.stainless-steel-world.net". 9. Titanium Fabrication Corporation. Le titane pour les utilisations industrielles: spécifications et grades, Disponible sur : " www.tifab.com, 2001.

D. Brunette, T. P. Textor, M. Thomsen, and P. , Titanium in medicine
DOI : 10.1007/978-3-642-56486-4

S. Szmukler-moncler, Z. P. Perrin, D. Bernard, J. Neumann, and H. , Bio-implant interface : Improving the biomaterials, Boca Raton, p.448, 2003.

Y. Mahiat and . La, Stratégie prothétique, pp.55-66, 2006.

L. Rimondini, Bacterial colonization of zirconia ceramic surfaces: an in vitro and in vivo study, Int J Oral Maxillofac Implants, vol.17, issue.6, pp.793-801, 2002.

M. Andreiotelli and R. J. , Fracture Strength of Zirconia Implants after Artificial Aging, Clinical Implant Dentistry and Related Research, vol.15, issue.1, 2008.
DOI : 10.1902/jop.1998.69.7.743

R. Merickse-stern, Long-term evaluation of non-submerged hollow cylinder implants. Clinical and radiographic results, Clinical Oral Implants Research, vol.10, issue.3, pp.252-261, 2001.
DOI : 10.1034/j.1600-0501.1992.030405.x

I. Zhitomirsky, Ceramic Films Using Cathodic Electrodeposition, JOM, vol.52, issue.1, 2000.

S. Sriveeraraghavan, Silver Electrodeposition from Thiosulfate Solutions. Met. finich, pp.115-132, 1989.

J. Jain, Silver Nanoparticles in Therapeutics: Development of an Antimicrobial Gel Formulation for Topical Use, Molecular Pharmaceutics, vol.6, issue.5, pp.1388-401, 2009.
DOI : 10.1021/mp900056g

P. Berçot, Dépôts composites par électrolyse, Paramètres et applications, Techn. ing., Mater. mét. M, vol.1, pp.623-625

X. Pang and I. Zhitomirsky, Electrodeposition of hydroxyapatite???silver???chitosan nanocomposite coatings, Surface and Coatings Technology, vol.202, issue.16, pp.3815-3836, 2008.
DOI : 10.1016/j.surfcoat.2008.01.022

P. Missika and C. Robert-maillet, Traitement de la péri-implantite : étude bibliographique. Actual. odonto-stomatol, pp.405-429, 1997.

D. Thomson-neal, G. H. Evans, and . M. Meffert-r, Incidence des traitements prophylactiques sur les implants en titane en saphir et à revêtement d' hydroxyapatite : étude au microscope électronique à balayage. Parodontie, dentisterie restauratrice, pp.301-311, 1989.

M. G. Newman and T. F. Flemming, Periodontal considerations of implants and implant associated microbiota, J. Dent. Educ, vol.988, issue.12, pp.52-737

E. S. Rosenberc, J. P. Torosian, and J. Slots, Microbial differences in 2 clinically distinct types of failures of osseointegrated implants, Clinical Oral Implants Research, vol.2, issue.3, pp.135-144, 1991.
DOI : 10.1034/j.1600-0501.1991.020306.x

P. Apse, Cross-sectional clinical and microbiological comparaison of peri-implant (osseointegrated) and periodontal sulcus, J. Dent. Res, issue.142, pp.67-768, 1988.

M. S. Tonetti, La péri-implantite : considérations biologiques, J. Parodontol

S. Schou and T. Hendrik, Traitement de la péri-implantite, utilisation des techniques chirurgicales de régénération. Titane, pp.19-27, 2006.

A. Mombelli and N. P. Lang, The diagnosis and treatment of peri-implantitis, Periodontology 2000, vol.6, issue.1, pp.63-76, 1998.
DOI : 10.1034/j.1600-0501.1992.030406.x

A. Mombelli, M. A. Van-oosten, E. Schurch, . Jr, and N. P. Lan, The microbiota associated with successful or failing osseointegrated titanium implants, Oral Microbiology and Immunology, vol.15, issue.4, pp.145-151, 1987.
DOI : 10.1111/j.1600-051X.1979.tb01931.x

A. Mombelli, Microbiology and antimicrobial therapy of peri-implantitis, Periodontology 2000, vol.3, issue.1, pp.177-189, 2000.
DOI : 10.1034/j.1600-0501.1992.030406.x

L. J. Heitz-mayfield, Diagnosis and management of peri-implant diseases, Australian Dental Journal, vol.19, issue.s1
DOI : 10.1111/j.1600-051X.2007.01098.x

M. Quirynen, N. Van-essche, D. Botticelli, and T. Berglundh, How does the timing of implant placement to extraction after outcome?, Int. J. oral maxillofac. implants, pp.22-203, 2007.

A. Ross-jansaker, H. Renvert, C. Lindahl, and S. Renvert, Nine- to fourteen-year follow-up of implant treatment. Part III: factors associated with peri-implant lesions, Journal of Clinical Periodontology, vol.16, issue.4, pp.296-301, 2006.
DOI : 10.1111/j.1600-051X.2004.00568.x

J. Giovannoli, Technique chirurgicale de réparation osseuse péri-implantaire

G. A. Van-der-weijden, K. M. Van-bemmel, and S. Renvert, Implant therapy in partially edentulous, periodontally compromised patients: a review, Journal of Clinical Periodontology, vol.14, issue.3, pp.506-511, 2005.
DOI : 10.1902/jop.1999.70.7.724

S. D. Ferreira, G. L. Silva, J. R. Cortelli, J. E. Costa, and F. O. Costa, Prevalence and risk variables for peri-implant disease in Brazilian subjects, Journal of Clinical Periodontology, vol.17, issue.12, pp.929-935, 2006.
DOI : 10.1034/j.1600-051x.2001.028006517.x

M. S. Cunes and C. De-putter, A single dimension statistical evaluation of predictors in implant-overdenture treatment, Journal of Clinical Periodontology, vol.9, issue.5, pp.425-431, 1996.
DOI : 10.1177/00220345930720010201

I. K. Karoussis, G. E. Slavi, L. J. Heitz-mayfield, U. Brägger, C. H. Hämmerle et al., Long-term implant prognosis in patients with and without a history of chronic periodontitis: a 10-year prospective cohort study of the ITIR Dental Implant System, Clinical Oral Implants Research, vol.63, issue.1
DOI : 10.1016/0022-3913(90)90237-7

M. C. Martins, J. A. Shibli, R. S. Abi-rached, E. Marcantonia, and . Jr, Progression of Experimental Chronic Peri-Implantitis in Dogs: Clinical and Radiographic Evaluation, Journal of Periodontology, vol.5, issue.8
DOI : 10.1016/S0022-3913(97)70210-5

M. Quirynen, H. C. Van-der-mei, C. M. Bollen, A. Schotte, M. Marechal et al., An in vivo study of the influence of the surface roughness of implants on the microbiology of supra-end subgingival plaque, J Dent Res, issue.9, pp.72-1304, 1993.

M. Vardelle, A. Vardelle, P. Fauchais, K. I. Li, B. Dussoubs et al., Controlling particle injection behavior relationship in plasma spraying, J. Therm

Y. Lu, A. M. Yu, and J. X. Yang, Two factors having a stricking influence on plasma spraying coatings, 2 nd plasma technik symposium

M. P. Planche, Contribution à l'étude des fluctuations dans une torche à plasma

. Applications-À-la-dynamique-de, Fauchais. Study of the behavior of the heat conductivity and transport properties of a simple reacting system, Thèse de doctorat en sciences des matériaux, pp.140-56, 1995.

J. Madejski, Solidification of droplets on a cold surface, International Journal of Heat and Mass Transfer, vol.19, issue.9, pp.1009-1013, 1976.
DOI : 10.1016/0017-9310(76)90183-6

T. Bennet and P. , Splat-quench solidification: estimating the maximum spreading of a droplet impacting a solid surface, Journal of Materials Science, vol.57, issue.4, pp.963-970, 1993.
DOI : 10.1007/BF00400880

A. C. Leger, Contribution à l'étude expérimentale de la formation de lamelles de zircone, de leur étalement et des contraintes résiduelles de dépôts projetés plasma, Thèse de doctorat en sciences des matériaux : Limoges : 1997, 181p. 60. V. V. Kudinov, P. Y. Pershev, V. A. Saffiallin. Forming of the structure of plasmasprayed materials, pp.381-410, 1989.

L. Bianchi, A. Grimaud, F. Blein, P. Lucchese, and P. Fauchais, Comparison of plasma sprayed alumina coatings by RF and DC plasma spraying, J. Therm. Spray Thech, vol.41, pp.59-66, 1995.

N. Sakakibara, H. Tsukuda, and A. Notomi, The splat morphology of plasma sprayed particles and the relation to coating properties, 1 st international Thermal Spray Conference, pp.753-758, 2000.

L. Pershin, A. L. Thomann, J. M. Bauchire, and E. Robert, Effect of substrate temperature on nickel coating adhesion, 15 th International symposium on plasma chemistry, pp.2633-2637, 2001.

P. Fauchais, M. Fukumoto, A. Vardelle, and M. Vardelle, Knowledge concerning splat formation. J. Therm. Spray Tech, Press. 65. S. Sampath and X. Jiang. Splat formation and micostructure development during plasma spraying: deposition temperature effect. Mater. sci. eng, pp.304-306144, 2001.

X. Jiang, Y. Wan, H. Herman, and S. Sampath, Role of condensates and adsorbates on substrate surface on fragmentation of impinging molten droplets during thermal spray, Thin Solid Films, vol.385, issue.1-2, pp.132-141, 2001.
DOI : 10.1016/S0040-6090(01)00769-6

M. Fukumoto, E. Nishioka, and T. Matsubara, Effect of interface wetting on flattening of freely fallen metal droplet onto a flat substrat, Thermal Spray : Meeting the challenge of the 21th century, pp.401-407, 1998.

J. Pech, Préoxydation générée par jet plasma d'arc soufflé Relation entre surface, oxydation et ahérence de dépôts Microstructural investigation of plasma-parayed ceramic splats, Thèse de doctorat en sciences et techniques, pp.125-135, 1997.

J. Madesjski, Solidification of droplets on a cold surface, International Journal of Heat and Mass Transfer, vol.19, issue.9, pp.1009-1013, 1976.
DOI : 10.1016/0017-9310(76)90183-6

M. Fukumoto, E. Nishioka, and T. Matsubara, Flattening and solidfication behavior of a metal droplet on a flat substrate surface held at various temperature

R. Ghafouri, S. Shakeri, S. Chandra, and J. Mostaghimi, Interactions between molten metal droplets impinging on a solid surface, International Journal of Heat and Mass Transfer, vol.46, issue.8, pp.1395-1407, 2003.
DOI : 10.1016/S0017-9310(02)00403-9

Z. Navid, N. Z. Mehdizadeh, S. Chandra, and J. Mostaghimi, Adhesion of tin droplet impinging on a stainless steel plate effect of substrate temperature roughness

Y. Chae, J. Mostaghimi, and T. Yoshida, Deformation and solidification process of a super???cooled droplet impacting on the substrate under plasma spraying conditions, Science and Technology of Advanced Materials, vol.1, issue.3
DOI : 10.1016/S1468-6996(00)00013-9

L. Pawlowski, Optimisation des paramètres de projection des céramiques par plasma d'arc. Etude des propriétés physiques et thermiques des couches projetées Exemple d'application : substrat pour la microélectronique hybride Thèse de doctorat en sciences physiques, 1985 : Limoges, 289p. 76. S. Tobe. A review on protection from corrosion, oxidation and hot corrosion by thermal spray coatings, Thermal Spray: Meeting the challenge of the 21th century, pp.3-11, 1998.

K. Ishikawa, T. Suzuki, Y. Kitaruma, and S. Tobe, Corrosion Resistance of Thermal Sprayed Titanium Coatings in Chloride Solution, Journal of Thermal Spray Technology, vol.8, issue.2, pp.273-278, 1998.
DOI : 10.1361/105996399770350494

T. Valente and F. P. Galliano, Corrosion resistance properties of reactive plasma-sprayed titanium composite coatings, Surface and Coatings Technology, vol.127, issue.1, pp.86-92, 2000.
DOI : 10.1016/S0257-8972(00)00549-1

J. Wigren and L. Pejryd, Thermal barrier coatings -Why; How, Where and Where to

W. Beele, G. Marijnissen, and A. Van-lieshout, The evolution of thermal barrier coatings ??? status and upcoming solutions for today's key issues, Surface and Coatings Technology, vol.120, issue.121, pp.120-12161, 1999.
DOI : 10.1016/S0257-8972(99)00342-4

P. Mäntyla and . Vuoristo, An improved deposition process for very thick porous thermal barrier coatings, Proceedings of the thermal spray conference, pp.196-201, 2002.

E. Kreyszig, L. Palacio, P. Pradanos, J. I. Calvo, and A. Hernandez, Advanced Engineering Mathematics. 3e éd Porosity measurement by a gas penetration method and other techniques applied to membrane characterization, Thin Solid Film, pp.866-83, 1972.

J. Ilavsky, C. C. Berndt, and J. Karthikeyan, Mercury intrusion porosimetry of plasmasprayed ceramic, Journal of Materials Science, vol.32, issue.15, pp.3925-3932, 1997.
DOI : 10.1023/A:1018612815364

S. J. Gregg and K. S. Sing, Adsorption Surface Area and Porosity, Journal of The Electrochemical Society, vol.114, issue.11, p.173, 1982.
DOI : 10.1149/1.2426447

T. Valente and F. P. Galliano, Corrosion resistance properties of reactive plasma-sprayed titanium composite coatings, Surface and Coatings Technology, vol.127, issue.1, pp.86-92, 2000.
DOI : 10.1016/S0257-8972(00)00549-1

B. Normand, F. Renaud, C. Coddet, and F. Tourenne, The effect of spraying conditions on the corrosion resistance of titanium coatings for surgical implants, Thermal Spray : Surface engineering via applied research, pp.73-78, 1996.

I. Yu, K. , and T. V. Chukalovskaya, A technique for measurement of porosity in protective coatings, Surf. Coat. Technol, vol.88, pp.5-11, 1996.

C. Liu, Q. Bi, A. Leyland, and A. Matthews, An electrochemical impedance spectroscopy study of the corrosion behaviour of PVD coated steels in 0.5 N NaCl aqueous solution: Part II., Corrosion Science, vol.45, issue.6
DOI : 10.1016/S0010-938X(02)00214-7

P. Siitonen, T. Konos, and P. O. Kettunen, Corrosion of stainless steel coatings made by different methods of thermal spraying, Thermal Spray Industrial Applications, pp.105-110, 1994.

K. Ishikawa, T. Suzuki, Y. Kitamura, and S. Tobe, Corrosion Resistance of Thermal Sprayed Titanium Coatings in Chloride Solution, Journal of Thermal Spray Technology, vol.8, issue.2, pp.273-278, 1999.
DOI : 10.1361/105996399770350494

C. L. Li, H. X. Zhao, T. Takahashi, and M. Matsumura, Improvement of corrosion resistance of materials coated with a Cr2O3/NiCr dilayer using a sealing treatment, Materials Science and Engineering: A, vol.308, issue.1-2
DOI : 10.1016/S0921-5093(00)01976-6

R. Sivakumar and B. L. Mordike, High temperature coatings for gas turbine blades: A review, Surface and Coatings Technology, vol.37, issue.2, pp.139-160, 1989.
DOI : 10.1016/0257-8972(89)90099-6

I. Zaplatynsky, Performance of laser-glazed zirconia thermal barrier coatings in cyclic oxidation and corrosion burner rig tests, Thin Solid Films, vol.95, issue.3, pp.275-284, 1982.
DOI : 10.1016/0040-6090(82)90020-7

K. A. Khor and Y. W. Gu, Hot isostatic pressing of plasma sprayed yttria-stabilized zirconia, Materials Letters, vol.34, issue.3-6, pp.263-268, 1998.
DOI : 10.1016/S0167-577X(97)00184-5

C. S. Yip, K. A. Khor, N. L. Loh, and P. Cheang, Thermal spraying of

K. A. Khor, C. S. Yip, and P. Cheang, Post-spray hot isostatic pressing of plasma sprayed Ti???6Al???4V/hydroxyapatite composite coatings, Journal of Materials Processing Technology, vol.71, issue.2, pp.71280-287, 1997.
DOI : 10.1016/S0924-0136(97)00086-1

P. Fauchais, M. Vardelle, A. Vardelle, L. Bianchi, and A. C. Leger, Parameters controlling the generation and properties of plasma sprayed zirconia coatings, Plasma Chemistry and Plasma Processing, vol.4, issue.1, pp.99-125, 1996.
DOI : 10.1007/BF01512630

S. Kuroda, T. Fukushima, and S. Kitahara, Significance of quenching stress in the cohesion and adhesion of thermally sprayed coatings, Journal of Thermal Spray Technology, vol.83, issue.4-6, pp.325-323, 1992.
DOI : 10.6028/jres.042.009

S. Kuroda and T. W. Clyne, The quenching stress in thermally sprayed coatings, Thin Solid Films, vol.200, issue.1, pp.49-66, 1991.
DOI : 10.1016/0040-6090(91)90029-W

T. Renault, Contrôle des propriétés d'un dépôt élaboré par projection thermique : mise au point d'un appareil de diagnostic 'in-situ' du procédé sur site industriel, Thèse de doctorat en sciences et techniques, p.210, 2001.

J. Comyn, Surface treatment and analysis for adhesive bonding, International Journal of Adhesion and Adhesives, vol.10, issue.3, pp.161-165, 1990.
DOI : 10.1016/0143-7496(90)90099-J

M. Mellali, P. Fauchais, and A. Grimaud, Influence of substrate roughness and temperature on the adhesion/cohesion of alumina coatings, Surface and Coatings Technology, vol.81, issue.2-3, pp.275-286, 1996.
DOI : 10.1016/0257-8972(95)02540-5

D. T. Gawne, B. J. Griffiths, and G. Dong, The Influence of Pretreatment on the Adhesion of Ceramic Coatings on Steel, Transactions of the IMF, vol.20, issue.6, pp.205-207, 1997.
DOI : 10.1080/00202967.1997.11871174

J. Pech, B. Hannoyer, A. Denoirjean, and P. Fauchais, Influence of substrate preheating monitoring on alumina splat formation in d. c. plasma process, Thermal Spray : Surface engineering via Applied Research, pp.759-765, 2000.

J. Danze, Les alliages métalliques utilisés en dentisterie,les effets galvaniques? leurs conséquences sur la santé, Monde dentaire, p.114, 2002.

P. Philibert, Protection contre la corrosion. Paris : Presses Universit, p.176, 1973.

A. Hartwig, L. H. Mullenders, R. Schlepegrell, I. Krueger, and D. Beyersmann, Interaction ofnickel (II) with D.N.A. repair processes : inhibition of the incision step in nucleotide excisionrepair, Metal Ions in Biology and Medicine

V. Rodilla, A. T. Miles, and G. M. Hawksworth, Metal toxicity and induction of metallothionein incultured human proximal tubular cells, In Metal ions in Biology and Medicine, vol.4, pp.88-90, 1996.

N. A. Littlefield and B. S. Hass, Effect of magnesium on DNA damage from cadmium, nickel,mercury and lead, Metal ions in Biology and Medicine

F. F. Ruess, Sur un nouvel effet de l'électricité galvanique, Mem. Soc. Imp. Natur. Moscou, issue.2, p.327, 1809.

H. C. Hamaker, E. J. Verwey, and I. Part, Part II.???(C) Colloid stability. The role of the forces between the particles in electrodeposition and other phenomena, Trans. Faraday Soc., vol.35, issue.0, pp.180-185, 1940.
DOI : 10.1039/TF9403500180

M. Faraday, Experimental relations of gold (and other metals) to light, Proc. Roy. Soc. Lon., 1857, pp.145-181

J. P. Jolivet, De la solution à l'oxyde, savoirs actuels; série chimie), p.387, 1994.

J. A. Davis, R. O. James, and J. O. Leckie, Surface ionization and complexation at the oxide/water interface, Journal of Colloid and Interface Science, vol.63, issue.3, p.480, 1978.
DOI : 10.1016/S0021-9797(78)80009-5

V. Hasthrope, Rhéologie des suspensions céramiques, 1995.

E. J. Verwey and J. T. Overbeek, Theory of the stability of lyophobic colloids, p.205, 1948.

S. Lebrette, Influence de l'éthanol sur la dispersion du rutile en milieu aqueux, élaboration de couches céramiques par électrophorèse, Thèse de doctorat Université de, p.173, 2002.

O. Van-der-biest and L. J. Vandeperre, ELECTROPHORETIC DEPOSITION OF MATERIALS, Annual Review of Materials Science, vol.29, issue.1
DOI : 10.1146/annurev.matsci.29.1.327

C. Washburn, J. Jorne, and S. Kurinec, Cathodic electrophoretic deposition of ceramic nano particle manganese zinc perrite, Key Eng. Mat, pp.314127-132, 2006.

J. Mizuguchi, T. Muchi, and K. Sumi, A Highly Stable Nonaqueous Suspension for the Electrophoretic Deposition of Powdered Substances, Journal of The Electrochemical Society, vol.130, issue.9, pp.1819-1825
DOI : 10.1149/1.2120105

L. Vandeperre, O. Van-der-biest, F. Bouyer, J. Persello, and A. Foissy, Electrophoretic forming of silicon carbide ceramics, Journal of the European Ceramic Society, vol.17, issue.2-3, pp.373-376, 1997.
DOI : 10.1016/S0955-2219(96)00106-9

J. M. Andrews, J. Dracass, A. H. Collins, and D. C. Cornish, The forming of ceramic bodies by electrophoretic deposition, Proc. Br, pp.211-229, 1969.

B. Ferrari-fernandez, Conformado de materiales cerámicos por deposición electrophoretica, Thèse de doctorat, 1998.

R. Moreno and B. Ferrari, Effect of the slurry properties on the homogeneity of alumina deposits obtained by aqueous electrophoretic deposition, Materials Research Bulletin, vol.35, issue.6, pp.887-897, 2000.
DOI : 10.1016/S0025-5408(00)00288-9

M. Mihailescu, M. Emandi, V. Vancea, and M. Marcu, Electrophoretic behavior of ceramic sanitaryware slips. Interceram, pp.165-170, 1991.

B. Ferrari and R. Moreno, Electrophoretic deposition of aqueous alumina slips, Journal of the European Ceramic Society, vol.17, issue.4, pp.549-556, 1997.
DOI : 10.1016/S0955-2219(96)00113-6

B. Ferrari, J. C. Farinas, and R. Moreno, Determination and Control of Metallic Impurities in Alumina Deposits Obtained by Aqueous Electrophoretic Deposition, Journal of the American Ceramic Society, vol.35, issue.6, pp.733-739, 2001.
DOI : 10.3989/cyv.1998.v37.i5.996

I. Zhitomirsky, A. Kohn, and L. Gal-or, Cathodic electrosynthesis of PZT films, Materials Letters, vol.25, issue.5-6, pp.223-227, 1995.
DOI : 10.1016/0167-577X(95)00191-3

P. C. Hiemenz, Principles of Colloid and Surface Chemistry. 2e éd, p.815, 1986.

H. Koelmans, Suspensions in non-aqueous media, Philips Res. Rep, vol.10, pp.161-193, 1955.

F. Grillon, D. Fayeulle, and M. Jeandin, Quantitative image analysis of electrophoretic coatings, Journal of Materials Science Letters, vol.11, issue.5, pp.272-275, 1992.
DOI : 10.1007/BF00729410

P. Sarkar and P. S. Nicholson, Electrophoretic Deposition (EPD): Mechanisms, Kinetics, and Application to Ceramics, Journal of the American Ceramic Society, vol.139, issue.5, pp.79-1987, 1996.
DOI : 10.1149/1.2069341

M. Shimbo, K. Tanzawa, M. Miyakawa, and T. Emoto, Electrophoretic Deposition of Glass Powder for Passivation of High Voltage Transistors, Journal of The Electrochemical Society, vol.132, issue.2, pp.393-398, 1985.
DOI : 10.1149/1.2113849

E. Sluzky and K. Hesse, Electrophoretic Preparation of Phosphor Screens, Journal of The Electrochemical Society, vol.136, issue.9, pp.2724-2727, 1985.
DOI : 10.1149/1.2097574

P. E. Pierce, The physical chemistry of the cathodic electrodeposition process, J. Coat. Technol, issue.672, pp.5352-67, 1981.

V. Tassel, J. J. Randall, and C. A. , Mechanisms of Electrophoretic Deposition, Key Engineering Materials, vol.314, pp.167-174, 2006.
DOI : 10.4028/www.scientific.net/KEM.314.167

P. M. Biesheuvel and H. Verweij, Theory of cost formation in electrophoretic deposition

B. Ferrari, R. Moreno, and J. A. Cuesta, Aresistivity model for electrophoretic deposition

M. Uchida, Antibacterial zeolite and its application, Chem Int, vol.46, pp.48-54, 1995.

K. Das, Surface Coatings for lmprovement of Bone Cell Materials and Antimicrobial Activities of Ti lmplants, J. biomed mater res., PartB appl. biomater, vol.87, issue.2, pp.455-466, 2008.

K. Kawahara, K. Tsuruda, M. Morishita, and M. Uchida, Antibacterial effect of silver-zeolite on oral bacteria under anaerobic conditions, Dental Materials, vol.16, issue.6, pp.452-497, 2000.
DOI : 10.1016/S0109-5641(00)00050-6

C. Kunin and . Detection, Prevention and Management of Urinary Tract Infection, p.447, 1987.

L. Narayan, G. R. Chen, E. S. Sauter, and F. M. , Plating and Surface Finishing, p.38, 1976.

R. Narayan and S. Chattopadhyay, Electrodeposited Cr???Al2O3 composite coatings, Surface Technology, vol.16, issue.3, p.227, 1982.
DOI : 10.1016/0376-4583(82)90113-3

P. Berçot, Dépôts composites par électrolyse, Paramètres et applications

K. L. Lee and C. C. Wan, A Study of the Composite Electrodeposition of Copper with Alumina Powder, Journal of The Electrochemical Society, vol.135, issue.8, 1930.
DOI : 10.1149/1.2096182

J. D. Bobyn, R. M. Pilliar, H. U. Cameron, and G. C. Weatherly, The optimum pore size lbr the fixation of porous-surfaced metal implants by the ingrowth of bone

K. Das, S. Bose, and A. Bandyopadhyay, TiO2 nanotubes on Ti : Influence of nanoscale morphology on bone-cell matederl interaction, J. Biomed. Mater. Res. partA

C. G. Fink and J. D. Prince, The codeposition of copper and graphite. Transations of the American Electrochemical society, p.315, 1928.

D. Liu and W. H. Tuan, Microstructure and its influence on thermal and electrical conductivity of ZrO2???Ag composites, Materials Chemistry and Physics, vol.48, issue.3, pp.258-262, 1997.
DOI : 10.1016/S0254-0584(96)01898-6

P. Gay, J. M. Limat, P. Steinmann, and J. Pagetti, Characterisation and mechanical properties of electroless NiP???ZrO2 coatings, Surface and Coatings Technology, vol.202, issue.4-7, pp.1167-1171, 2007.
DOI : 10.1016/j.surfcoat.2007.05.081

S. H. Yeh and C. C. Wan, Study of SiC/Ni composite plat-ing in the watts bath, Plat. Surf. Finish, vol.84, p.54, 1997.