M. W. Abdulrahman, CFD Simulations of Direct Contact Volumetric Heat Transfer Coefficient in a Slurry Bubble Column at a High Gas Temperature of a Helium-Water-Alumina System, Applications Therm Engineering, vol.99, pp.224-234, 2016.

M. Aghbolaghy and A. Karimi, Simulation and Optimization of Enzymatic Hydrogen Peroxide Production in a Continuous Stirred Tank Reactor Using CFD-RSM Combined Method, Journal Taiwan Institute Chemical Engineering, vol.45, pp.101-107, 2014.

A. Alvarado, S. Vedantam, P. Goethals, and I. Nopens, A Compartmental Model to Describe Hydraulics in A Full-Scale Waste Stabilization Pond, Water Research, vol.46, pp.521-530, 2012.

G. A. Ameer, E. A. Grovender, B. Obradovic, C. L. Cooney, and R. Langer, RTD Analysis of a Novel Taylor-Couette Flow Device for Blood Detoxification, AIChE J, vol.45, pp.633-638, 1999.

/. Bereitgestellt-von-|-de-gruyter and . Angemeldet, , vol.18, p.55

J. Behin and M. Aghajari, Influence of Water Level on oil-Water Separation by Residence Time Distribution Curves Investigations, Sep Purification Technological, vol.64, pp.48-55, 2008.

J. Behin and S. Bahrami, Modeling an Industrial Dissolved Air Flotation Tank Used for Separating Oil from Wastewater, Chemical Engineering Processing Processing Intensif, vol.59, pp.1-8, 2012.
DOI : 10.1016/j.cep.2012.05.004

H. Benkhelifa, J. Legrand, P. Legentilhomme, and A. Montillet, Study of the Hydrodynamic Behaviour of the Batch and Continuous Torus Reactor in Laminar and Turbulent Flow Regimes by Means of Tracer Methods, Chemical Engineering Sciences, vol.55, pp.447-456, 2000.

F. Bezzo and S. Macchietto, A General Methodology for Hybrid multizonal/CFD Models: Part II, Automatic Zoning Computation Chemical Engineering, vol.28, pp.513-525, 2004.

V. H. Bhusare, M. K. Dhiman, D. V. Kalaga, S. Roy, and J. B. Joshi, CFD Simulations of a Bubble Column with and without Internals by Using OpenFOAM, Chemical Engineering Journal, vol.317, pp.157-174, 2017.

K. B. Bischoff, The General Use of Imperfect Pulse Inputs to Find Characteristics of Flow Systems, Canada Journal Chemical Engineering, vol.41, pp.129-129, 1963.

V. Blet, P. Berne, F. Tola, X. Vitart, and C. Chaussy, Recent Developments in Radioactive Tracers Methodology, Applications Radiation Isot, vol.51, pp.615-624, 1999.

A. Brucato, M. Ciofalo, F. Grisafi, and R. Tocco, On the Simulation of Stirred Tank Reactors via Computational Fluid Dynamics, Chemical Engineering Sciences, vol.55, pp.324-327, 2000.

A. Busciglio, F. Grisafi, F. Scargiali, and A. Brucato, Mixing Dynamics in Uncovered Unbaffled Stirred Tanks, Chemical Engineering Journal, vol.254, pp.210-219, 2014.

M. S. Chen, L. T. Fan, C. L. Hwang, and E. S. Lee, Air Flow Models in a Confined Space a Study in Age Distribution, Build Sciences, vol.4, pp.90003-90009, 1969.

A. Cholette and L. Cloutier, Mixing Efficiency Determinations for Continuous Flow Systems, Canada Journal Chemical Engineering, vol.37, pp.105-112, 1959.

S. Claudel, C. Fonteix, J. Leclerc, and H. Lintz, Application of the Possibility Theory to the Compartment Modelling of Flow Pattern in Industrial Processes, Chemical Engineering Sciences, vol.58, pp.4005-4016, 2003.

H. Constant-machado, J. Leclerc, E. Avilan, G. Landaeta, N. Añorga et al., Flow Modeling of a Battery of Industrial Crude Oil/Gas Separators Using 113 M in Tracer Experiments, Chemical Engineering Processing Processing Intensif, vol.44, pp.760-765, 2005.

P. V. Danckwerts, Continuous Flow Systems: Distribution of Residence Times, Chemical Engineering Sciences, vol.2, pp.1-13, 1953.

P. V. Danckwerts, The Effect of Incomplete Mixing on Homogeneous Reactions, Chemical Engineering Sciences, vol.8, pp.80040-80048, 1958.

A. Delafosse, S. Calvo, M. Collignon, F. Delvigne, M. Crine et al., Euler-Lagrange Approach to Model Heterogeneities in Stirred Tank Bioreactors -Comparison to Experimental Flow Characterization and Particle Tracking, Chemical Engineering Sciences, vol.134, pp.457-466, 2015.

A. Delafosse, S. M.-l.-collignon, F. Calvo, M. Delvigne, P. Crine et al., CFD-based Compartment Model for Description of Mixing in Bioreactors, Chemical Engineering Sciences, vol.106, pp.76-85, 2014.

A. Delafosse, F. Delvigne, M. Collignon, M. Crine, P. Thonart et al., Development of a Compartment Model Based on CFD Simulations for Description of Mixing in bioreactors/Développement D'un Modèle Compartimenté Basé Sur La Mécanique Des Fluides Numérique Pour La Description Du Mélange En Bioréacteur, Biotechnology Agronomic Société Environment, vol.14, p.517, 2010.

V. Fichet, M. Kanniche, P. Plion, and O. Gicquel, A Reactor Network Model for Predicting NOx Emissions in Gas Turbines, Fuel, vol.89, pp.2202-2210, 2010.
URL : https://hal.archives-ouvertes.fr/hal-02003109

D. F. Fletcher, D. D. Mcclure, J. M. Kavanagh, and G. W. Barton, CFD Simulation of Industrial Bubble Columns: Numerical Challenges and Model Validation Successes, Applications Mathematical Model, vol.44, pp.25-42, 2017.

L. B. Gaida, C. Andre, C. Bideaux, S. Alfenore, X. Cameleyre et al., Modelling of Hydrodynamic Behaviour of a Two-Stage Bioreactor with Cell Recycling Dedicated to Intensive Microbial Production, Chemical Engineering Journal, vol.183, pp.222-230, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01267970

Y. Gao, F. J. Muzzio, and M. G. Ierapetritou, A Review of the Residence Time Distribution (RTD) Applications in Solid Unit Operations, Powder Technological, vol.228, pp.416-423, 2012.

L. G. Gibilaro, On the Residence Time Distribution for Systems with Open Boundaries, Chemical Engineering Sciences, vol.33, pp.80008-80014, 1978.

M. Gresch, R. Brügger, A. Meyer, and W. Gujer, Compartmental Models for Continuous Flow Reactors Derived from CFD Simulations, Environmental Science & Technology, vol.43, pp.2381-2387, 2009.

D. Guha, M. P. Dudukovic, P. A. Ramachandran, S. Mehta, and J. Alvare, CFD-based Compartmental Modeling of Single Phase StirredTank Reactors, AIChE J, vol.52, pp.1836-1846, 2006.

S. Hocine, L. Pibouleau, C. Azzaro-pantel, and S. Domenech, Modelling Systems Defined by RTD Curves, Computation Chemical Engineering, vol.32, pp.3112-3120, 2008.
DOI : 10.1016/j.compchemeng.2008.05.002

S. Hocine, L. Pibouleau, C. Azzaro-pantel, and S. Domenech, Modelling Systems Defined by RTD Curves, Computation Chemical Engineering, vol.32, pp.3112-3120, 2008.
DOI : 10.1016/j.compchemeng.2008.05.002

H. Hristov, R. Mann, V. Lossev, S. D. Vlaev, and P. Seichter, A 3-D Analysis of Gas-Liquid Mixing, Mass Transfer and Bioreaction in A Stirred Bio-Reactor, Food Bioprod Processing, vol.79, pp.232-241, 2001.

H. V. Hristov, R. Mann, V. Lossev, and S. D. Vlaev, A Simplified CFD for Three-Dimensional Analysis of Fluid Mixing, Mass Transfer and Bioreaction in A Fermenter Equipped with Triple Novel Geometry Impellers. Food Bioprod. Process, vol.82, pp.21-34, 2004.

M. Kagoshima and R. Mann, Development of a Networks-Of-Zones Fluid Mixing Model for an Unbaffled Stirred Vessel Used for Precipitation, Fluid Mixing VIII International Conference Fluid Mixing VIII International Conference, vol.61, pp.2852-2863, 2006.

/. Bereitgestellt-von-|-de-gruyter and . Angemeldet, , vol.18, p.55

A. L. Kulkarni and A. W. Patwardhan, CFD Modeling of Gas Entrainment in Stirred Tank Systems, Chemical Engineering Researcher Design, vol.92, pp.1227-1248, 2014.

M. Laakkonen, P. Moilanen, V. Alopaeus, and J. Aittamaa, Dynamic Modeling of Local Reaction Conditions in an Agitated Aerobic Fermenter, AIChE J, vol.52, pp.1673-1689, 2006.

C. Laquerbe, J. C. Laborde, P. Floquet, L. Pibouleau, and S. Domenech, Identification of Parametric Models Based on RTD Theory: Application to Safety Studies in Ventilated Nuclear Enclosures, Computation Chemical Engineering, vol.22, pp.347-353, 1998.

C. Laquerbe, J. C. Laborde, S. Soares, P. Floquet, L. Pibouleau et al., Synthesis of RTD Models VIA Stochastic Procedures: Simulated Annealing and Genetic Algorithm, Computation Chemical Engineering, vol.25, pp.1169-1183, 2001.

B. E. Launder and D. B. Spalding, The Numerical Computation of Turbulent Flows, Computer Methods in Applied Mechanics and Engineering, vol.3, pp.269-289, 1974.

J. Laurent, P. Bois, M. Nuel, and A. Wanko, Systemic Models of Full-Scale Surface Flow Treatment Wetlands: Determination by Application of Fluorescent Tracers, Chemical Engineering Journal, vol.264, pp.389-398, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01410303

L. Moullec, Y. , C. Gentric, O. Potier, and J. P. Leclerc, Comparison of Systemic, Compartmental and CFD Modelling Approaches: Application to the Simulation of a Biological Reactor of Wastewater Treatment, Chemical Engineering Sciences, vol.65, pp.343-350, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00432294

J. Leclerc, R. Mesnier, C. S. Calvo, G. Maghella, and E. Mamani, Interpretation of Radiotracer Experiments in an Industrial Battery of Desanders with Simultaneous Stochastic and Non-Stochastic Flows, Applications Radiation Isot, vol.65, pp.1208-1214, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00277007

J. Leclerc, H. Muhr, C. Findeling, J. Terriere, and Y. Charonnat, Modélisation De L'écoulement De L'eau Et Du Filler Dans Un Malaxeur Industriel Et Détermination De Son Pouvoir De Lissage, Bull.-Lab PONTS, vol.CHAUSSEES, pp.5-16, 1996.

M. A. Leon, T. A. Nijhuis, J. Van-der, J. C. Schaaf, and . Schouten, Residence Time Distribution and Reaction Rate in the Horizontal Rotating Foam Stirrer Reactor, Chemical Engineering Sciences, vol.117, pp.8-17, 2014.

O. Levenspiel, Chemical Reaction Engineering, Industrial Engineering Chemical Researcher, vol.38, pp.4140-4143, 1999.

W. Li and W. Zhong, CFD Simulation of Hydrodynamics of Gas-Liquid-Solid Three-Phase Bubble Column, Powder Technological, vol.286, pp.766-788, 2015.

A. B. Makokha, M. H. Moys, and M. M. Bwalya, Modeling the RTD of an Industrial Overflow Ball Mill as a Function of Load Volume and Slurry Concentration, Miner Engineering, vol.24, pp.335-340, 2011.

D. D. Mcclure, J. M. Kavanagh, D. F. Fletcher, and G. W. Barton, Oxygen Transfer in Bubble Columns at Industrially Relevant Superficial Velocities: Experimental Work and CFD Modelling, Chemical Engineering Journal, vol.280, pp.138-146, 2015.

R. N. Meroney and P. E. Colorado, CFD Simulation of Mechanical Draft Tube Mixing in Anaerobic Digester Tanks, Water Research, vol.43, pp.1040-1050, 2009.

L. Montastruc, C. Azzaro-pantel, L. Pibouleau, and S. Domenech, A Systemic Approach for Pellet Reactor Modeling: Application to Water Treatment, AIChE J, vol.50, pp.2514-2525, 2004.

L. Montastruc, J. P. Brienne, and I. Nikov, Modeling of Residence Time Distribution: Application to a Three-Phase Inverse Fluidized Bed Based on a Mellin Transform, Chemical Engineering Journal, vol.148, pp.139-144, 2009.

R. M. Moreira, A. M. Pinto, R. Mesnier, and J. Leclerc, Influence of Inlet Positions on the Flow Behavior inside a Photoreactor Using Radiotracers and Colored Tracer Investigations, Applications Radiation Isot, vol.65, pp.419-427, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00277041

E. K. Nauha and V. Alopaeus, Modeling Method for Combining Fluid Dynamics and Algal Growth in a Bubble Column Photobioreactor, Chemical Engineering Journal, vol.229, pp.559-568, 2013.

E. B. Nauman, Residence Time Distribution Theory for Unsteady Stirred Tank Reactors, Chemical Engineering Sciences, vol.24, pp.85074-85082, 1969.
DOI : 10.1016/0009-2509(69)85074-8

E. B. Nauman, Residence Time Distributions and Micromixing, Chemical Engineering Communicable, vol.8, pp.53-131, 1981.

E. B. Nauman, C. Niño-navarro, I. Chairez, L. Torres-bustillos, J. Ramírez-muñoz et al., Effects of Fluid Dynamics on Enhanced Biohydrogen Production in a Pilot Stirred Tank Reactor: CFD Simulation and Experimental Studies, Industrial Engineering Chemical Researcher, vol.47, pp.14630-14640, 2008.

L. Olander, J. M. Dessagne, F. Bonthoux, and J. P. Leclerc, A Study of General Ventilation and Local Exhaust Ventilation in Industrial Premises Using Residence Time Distribution Theory, Environment Progress, vol.14, pp.159-163, 1995.

H. J. Pant and V. N. Yelgoankar, Radiotracer Investigations in Aniline Production Reactors, Applications Radiation Isot, vol.57, pp.319-325, 2002.
DOI : 10.1016/s0969-8043(02)00093-3

W. R. Paterson, E. L. Berresford, D. L. Moppett, D. M. Scott, V. K. Simmons et al., Gas Flow Maldistribution in Moving Beds of Monosized Particles, Chemical Engineering Sciences, vol.55, pp.3515-3527, 2000.

A. Ponsich, C. Azzaro-pantel, S. Domenech, L. Pibouleau, and F. Pigeonneau, A Systemic Approach for Glass Manufacturing Process Modeling, Chemical Engineering Processing Processing Intensif, vol.48, pp.1310-1320, 2009.
DOI : 10.1016/j.cep.2009.06.001

URL : https://hal.archives-ouvertes.fr/hal-00498806

V. V. Ranade, Computational Flow Modeling for Chemical Reactor Engineering, 2002.

P. Ri, J. N.-q.-ren, J. Ding, W. Kim, and . Guo, CFD Optimization of Horizontal Continuous Stirred-Tank (HCSTR) Reactor for Bio-Hydrogen Production, International Journal Hydrog Energy, vol.42, pp.9630-9640, 2017.

S. Rigopoulos and A. Jones, A Hybrid CFD-Reaction Engineering Framework for Multiphase Reactor Modelling: Basic Concept and Application to Bubble Column Reactors, Chemical Engineering Sciences, vol.58, pp.3077-3089, 2003.

E. Roth, B. Fabre, A. Accary, and G. Thomas, Modelling of Stimulus Response Experiments in the Feed Channel of Spiral-Wound Reverse Osmosis Membranes, Desalination, vol.127, pp.69-77, 2000.

M. Seppälä, Automatic Zoning for Combined CFD and Multiblock Modelling, 2008.

P. Sivashanmugam and S. Sundaram, Residence Time Distribution Studies in Annular Circulating Fluidised Bed Drier, Powder Technological, vol.107, pp.256-258, 2000.

T. Song, K. Jiang, J. Zhou, D. Wang, N. Xu et al., CFD Modelling of Gas-Liquid Flow in an Industrial Scale Gas-Stirred Leaching Tank, vol.142, pp.63-72, 2015.

/. Bereitgestellt-von-|-de-gruyter and . Angemeldet, , vol.18, p.55

J. Th?n, R. Zitn?, J. Kluson, and T. Cechák, Analysis and Diagnostics of Industrial Processes by Radiotracers and Radioisotope Sealed Sources, 2002.

M. Vafaei-alamdari, R. Bounaceur, J. Leclerc, P. Tochon, and F. Chopard, Compartmental Modeling of a Structured Heat Exchanger Reactor: Conversion and Temperature Profiles Predictions, Journal Chemical Engineering Japanese, vol.42, pp.111-118, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00508826

W. P. Van-swaaij, J. C. Charpentier, and J. Villermaux, Residence Time Distribution in the Liquid Phase of Trickle Flow in Packed Columns, Chemical Engineering Sciences, vol.24, pp.80080-80081, 1969.

J. Villermaux, Génie De La Réaction Chimique-Conception Et Fonctionnement Des Réacteurs, 1993.

P. Vrábel, R. G. Van-der, F. N. Lans, . Van-der, K. C. Schot et al., CMA: Integration of Fluid Dynamics and Microbial Kinetics in Modelling of Large-Scale Fermentations, Chemical Engineering Journal, vol.84, pp.463-474, 2001.

D. Wadnerkar, M. O. Tade, V. K. Pareek, and R. P. Utikar, CFD Simulation of Solid-Liquid Stirred Tanks for Low to Dense Solid Loading Systems, Particuology, vol.29, pp.16-33, 2016.

H. Wang, X. Jia, X. Wang, Z. Zhou, J. Wen et al., CFD Modeling of Hydrodynamic Characteristics of a Gas-Liquid Two-Phase Stirred Tank, Applications Mathematical Model, vol.38, pp.63-92, 2014.

G. J. Wells and W. H. Ray, Methodology for Modeling Detailed Imperfect Mixing Effects in Complex Reactors, AIChE J, vol.51, pp.1508-1520, 2005.

J. Yianatos, L. Bergh, L. Vinnett, I. Panire, and F. Díaz, Modelling of Residence Time Distribution of Liquid and Solid in Mechanical Flotation Cells, Miner Engineering, vol.78, pp.69-73, 2015.

J. Zahradn?-k, R. Mann, M. Fialová, D. Vlaev, S. D. Vlaev et al., A Networks-Of-Zones Analysis of Mixing and Mass Transfer in Three Industrial Bioreactors, 16th International Conference on Chemical Reactor Engineering, vol.56, pp.252-261, 2001.

T. N. Zwietering, The Degree of Mixing in Continuous Flow Systems, Chemical Engineering Sciences, vol.11, pp.80068-80071, 1959.