, une corticale épaisse autour de noyaux d'os trabéculaire dense (D2), il convient de suivre le protocole qui suit Cas de la mise en place de 12 implants monoblocs, 6 maxillaires et 6 mandibulaires chez un patient édenté total. Première étape : Une fois l'essayage validé, les proth ses sont scellées Une radiographie des contrôles sera également réalisée

, Figures 83 et 84 : étape de taille des prep-caps à l'aide du guide de coupe, 2015.

, Oscar Wilde a dit « Le progr s n'est que l'accomplissement des utopies ». Et si notre utopie nous, dentistes, n'était autre qu'un art dentaire sans métaux ? Le PEEK mérite considération et est sans doute le précurseur d

A. Bakar, M. S. Cheang, P. Khor, and K. A. , Mechanical properties of injection molded hydroxyapatite-polyetheretherketone biocomposites, Compos Sci Technol, vol.63, issue.3-4, pp.421-425, 2003.

, American packaging Rochester plant

. Disponible,

P. Atlas, Cas cliniques et radiologiques de plus de 6 ans

, Atmospheric plasma treatment for medical device applications, 2016.

S. Barkarmo, A. Wennerberg, M. Hoffman, P. Kjellin, K. Breding et al., Nano-Hydroxyapatite-coated PEEK implants : a pilot study in a rabbit bone, J Biomed Mater Res A, vol.101, issue.2, pp.465-71, 2013.

H. N. Beck, Solubility characteristics of PEEK and PPS, J Appl Polym Sci, vol.45, issue.8, pp.1361-1367, 1992.

J. Beumer and S. G. Lewis, La prothèse sur implants de Branemark : protocole clinique et technique de laboratoire. Paris : Editions CdP, vol.250, 1991.

B. Bochnia-cerci, S. Roman, L. Guariza-filho, O. , S. Camargo et al., Dental enamel roughness with different acid etching times: atomic force microscopy study, European J Gen Dent, vol.1, issue.3, pp.187-91, 2012.

E. Boinard, R. A. Pethrick, and C. J. Mcfarlane, The influence of thermal history on the dynamic mechanical and dielectric studies of polyetheretherketone exposed to water and brine, Polymer, vol.41, issue.3, pp.1063-76, 2000.

C. Borcia, G. Borcia, and N. Dumitrascu, Surface treatment of polymers by plasma and UV radiation, Rom J Physiol, vol.56, issue.1-2, pp.224-232, 2001.

A. Bukat, P. Fassina, F. Greco, S. Piantelli, C. Piconi et al., Terre Haute : Rose-Hulman Institute of Technology, proceedings of 3rd International Symposium on Ceramics in Medicine, pp.355-366, 1990.

M. Cabraja, S. Oezdemir, D. Koeppen, and S. Kroppenstedt, Anterior cervical discectomy and fusion : comparison of titanium and polyetheretherketone cages, BMC Musculoskelet Disord, vol.13, p.172, 2012.

F. Carranza and G. Shklar, History of periodontology, vol.214, 2003.

P. Cebe and S. Hong, Crystallization behaviour of poly(ether-ether-ketone)

, Polymer, vol.27, issue.8, pp.1183-92, 1986.

, Champions implants, 2015.

F. Chen, H. Ou, L. B. Long, and H. , A constitutive model of polyether-etherketone (PEEK), J Mech Behav Biomed Mater, vol.53, pp.427-433, 2016.

J. Chevalier, L. Gremillard, and S. Deville, Low-Temperature Degradation of Zirconia and Implications for Biomedical Implants, Ann Rev Mater Res, vol.37, issue.1, pp.1-32, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00434119

J. M. Cheylan and C. Archien, Biocompatibilité des métaux, alliages et céramiques dentaires, Réal Clin, vol.16, issue.2, pp.169-186, 2005.

P. Christel, A. Meunier, M. Heller, J. P. Torre, and C. N. Peille, Mechanical properties and short-term in vivo evaluation of yttrium-oxide-partially-stabilized zirconia

, J Biomed Mater Res, vol.23, issue.1, pp.45-61, 1989.

J. Cougoulic and . Maitriser, état de surface : facteur d'adhésion, de prolifération, et d'interpénétration cellulaire pour une acceptation biologique de type greffe, c'est le défi des matériaux nanotechnologiques bioactifs, pp.21-30

E. Crubézy, P. Mureil, L. Girard, and J. Bernadou, False teeth of the Roman world, Nature, vol.391, issue.6662, p.29, 1998.

J. Davies, Mechanisms of endosseous integration, Int J Prosthodont, vol.11, issue.5, pp.391-401, 1998.

D. Dawson, Medical applications: a healthy market, 2010.

I. Denry and J. R. Kelly, State of the art of zirconia for dental applications, Dent Mater, vol.24, issue.3, pp.299-307, 2008.

H. Devlin, K. Horner, and D. Ledgerton, A comparison of maxillary and mandibular bone mineral densities, J Prosthet Dent, vol.79, issue.3, pp.323-330, 1998.

I. Dion, L. Bordenave, F. Lefebre, R. Bareille, C. Baquey et al., Physico-chemistry and cytotoxicity of ceramics. Part II, J Mater Sci Mater Med, vol.5, issue.1, pp.18-24, 1994.

. Dupupet-g-fibres-de-carbone-dans, Techniques de l'Ingénieur, vol.5134, 2008.

. Disponible,

P. Eppe, Allergies et intolérances en implantologie

S. Congrès, , 2007.

. Essai-de-résilience, , 2010.

B. Fayolle and A. Tcharkhtchi, Polymères et composites. Observation au MEB de sphérolites de PLA

S. J. Ferguson, J. D. Langhoff, K. Voelter, B. Von-rechenberg, D. Scharnweber et al., Biomechanical comparison of different surface modifications for dental implants, Int J Oral Maxillofac Implants, vol.23, issue.6, pp.1037-1046, 2008.

S. J. Ferguson, J. Visser, and A. Polikeit, The long-term mechanical integrity of nonreinforced PEEK-OPTIMA polymer for demanding spinal applications: experimental and finite-element analysis, Eur Spine J, vol.15, issue.2, pp.149-156, 2006.

F. Appell, , 2002.

M. Gahlert, T. Gudehus, S. Eichhorn, E. Steinhauser, H. Kniha et al., Biomechanical and histomorphometric comparison between zirconia implants with varying surface textures and a titanium implant in the maxilla of miniature pigs, Clin Oral Implants Res, vol.18, issue.5, pp.662-668, 2007.

A. K. Garg, Implant dentistry: a practical approach, 2009.

G. , I Elaboration d'ensimages thermoplastiques thermostables

D. J. Gorth, S. Puckett, B. Ercan, T. J. Webster, and M. Rahaman, Decreased bacteria activity on Si 3 N 4 surfaces compared with PEEK or titanium, Int J Nanomedicine, vol.7, pp.4829-4869, 2012.

C. Y. Guo, J. P. Matinlinna, and A. T. Tang, Effects of Surface Charges on Dental Implants: Past, Present, and Future, Int J Biomater, vol.2012, p.381535, 2012.

H. Sassi, B. Lehr, and P. , Ténacité et résistance à la propagation des fissures de fatigue de l'alliage de titane TA6V, J less-common met, vol.56, issue.2, pp.157-165, 1977.

S. Hahnel, A. Wieser, L. R. Rosentritt, and M. , Biofilm formation on the surface of modern implant abutment materials. Clin Oral Impl Res, 2015.

M. F. Harmand, ugoulic JP new biocompatible biomaterial : PEEK / ?-TCP

M. F. Harmand, A. Naji, G. Lorini, T. H. Priem, and C. Piconi, Cytotoxicity study of ceramic powders for plasma spray coating, Proc 12 th ESB Conf on Biomaterials, p.141, 1995.

J. M. Haussonne, C. Carry, P. Bowen, and J. Barton, Céramiques et verres. Principes et techniques d'élaboration, vol.16, 2005.

M. Hisbergues, V. S. Vendeville, and P. Zirconia, Established facts and perspectives for a biomaterial in dental implantology, J Biomed Mater Res Part B: Applied Biomaterials, vol.88, issue.2, pp.519-529, 2009.

C. C. Ho and S. J. Ding, Novel SiO 2 /PDA hybrid coatings to promote osteoblast like cell expression on titanium implants, J. Mater. Chem. B, vol.3, pp.2698-2707, 2015.

C. J. Hochscheidt, D. Menezes-alves, E. , B. Bernardes, L. A. Hochscheidt et al., Zirconia dental implants: an alternative for today or for the future? (part II), Dental press implantology, vol.6, issue.4, pp.114-138, 2012.

O. Hoffmann, N. Angelov, F. Gallez, R. E. Jung, and F. E. Weber, The zirconia implantbone interface: a preliminary histologic evaluation in rabbits, Int J Oral Maxillofac Implants, vol.23, issue.4, pp.691-695, 2008.

J. Huh, J. Y. Oh, C. K. Chough, C. B. Cho, W. I. Joo et al., Polyetheretherketone Cage filled with Beta-Tricalcium Phosphate versus Autogenous Tricortical Iliac Bone Graft in Anterior Cervical Discectomy and Fusion, Korean J Spine, vol.8, issue.3, pp.165-171, 2011.

Y. Ichikawa, Y. Akagawa, H. Nikai, and H. Tsuru, Tissue compatibility and stability of a new zirconia ceramic in vivo, J Prosthet Dent, vol.68, issue.2, pp.322-326, 1992.

M. Iijima, M. Takano, Y. Yasuda, T. Muguruma, S. Nakagaki et al., Effect of the quantity and quality of cortical bone on the failure force of a miniscrew implant, Eur J Orthod, vol.35, issue.5, pp.583-589, 2013.

A. Ito, T. Tateishi, S. Niwa, and S. Tange, In vitro evaluation of the cytocompatibility of wear particles generated by UHMWPE zirconia friction, Clin Mat, 1993.

P. Johansson, J. R. Kjellin, P. Currie, F. Chrcanovic, B. R. Wennerberg et al., Biomechanical évaluation and surface characterization of a nano-modified surface on PEEK implants : a study in the rabbit tibia, Int J Nanomedicine, vol.2014, issue.1, pp.3903-3914

D. Kemmish, Modern Plastics Encyclopedia 96, pp.225-232, 1995.

K. Kobayashi, H. Kuwajima, and M. T. , Phase change and mechanical properties of Zr02-Y2O3 solid electrolytes after ageing, Sol. State Ionics, vol.3, pp.489-93, 1981.

F. P. Koch, D. Weng, S. Kramer, S. Biesterfeld, A. Jahn-eimermacher et al., Osseointegration of one-piece zirconia implants compared with a titanium implant of identical design: a histomorphometric study in the dog, Clin Oral Impl Res, vol.21, issue.3, pp.350-356, 2010.

F. P. Koch, D. Weng, S. Kramer, and W. Wagner, Soft tissue healing at one-piece zirconia implants compared to titanium and peek implants of identical design : a histomorphometric study in the dog, Int J Periodontics Restorative Dent, vol.33, issue.5, pp.669-677, 2013.

R. J. Kohal and G. Klaus, A Zirconia Implant-Crown System: A Case Report, Int J Periodontics Restorative Dent, vol.24, issue.2, pp.146-153, 2004.

S. M. Kurtz and . Peek,

P. M. Kuznesof, Titanium dioxide: chemical and technical assessment

. Kyocera, , 2016.

J. F. Lamethe, tude de l'adhésion de composites thermoplastiques semicristallins, Application à la mise en oeuvre par soudure

U. Pierre, M. Curie, and V. I. Paris, , pp.53-67, 2004.

W. T. Lee, J. Y. Koak, Y. J. Lim, S. K. Kim, K. Hb et al., Stress shielding and fatigue limits of poly-ether-ether-ketone dental implants, J Biomed Mater Res B Appl Biomater, vol.2012, issue.4, pp.1044-1052

J. Li, Y. Liu, L. Hermansson, and R. Söremark, Evaluation of biocompatibility of various ceramic powders with human fibroblasts in vitro, Clin Mat, 1993.

P. Lucas and G. Zanella, Mise en oeuvre des composites TP-Compounds à fibres courtes et longues, Techniques de l'Ingénieur : Matériaux, Plastiques et composites, vol.5235, 2007.

R. Ma and T. Tang, Current strategies to improve the bioactivity of PEEK, Int J Mol Sci, vol.15, issue.4, pp.5426-5445, 2014.

M. Intyre, N. S. Walzac, and M. J. , New UV/ozone treatment improves adhesiveness of polymer surfaces. Modern plastics, vol.25, pp.69-75, 1995.

M. Maggiolo, Manual of dental art, 1809. Cited by : Kirk EC. Discussion of Dr. E Greenfield's paper Dent Cosmos, vol.55, p.432, 1913.

G. Manzano, L. R. Herrero, and J. Montero, Comparison of Clinical Performance of Zirconia Implants and Titanium Implants in Animal Models: A Systematic Review, Int J Oral Maxillofac Implants, vol.29, issue.2, pp.311-320, 2014.

P. Margossian and G. Laborde, Restaurations céramocéramiques, EMC odontologie, pp.1-9, 2008.

H. Martinez, P. Renault, G. Georges-renault, L. Pierrisnard, and T. Rouach, Les implants : chirurgie et prothèse : choix thérapeutique stratégique

K. Marya, J. S. Dua, S. Chawla, P. R. Sonoo, A. Aggarwal et al., Polyetheretherketone (PEEK) dental implants : a case for immediate loading, International journal of oral implantology and clinical research, vol.2, issue.2, pp.97-103, 2011.
DOI : 10.5005/jp-journals-10012-1043

J. P. Meningaud, F. Spahn, J. M. Donsimoni, L. L'apr-s-titane, and . Peek, Rev stomatol chi maxillofac, vol.113, pp.407-410, 2012.

R. Messer, P. E. Lockwood, J. C. Wata-ha, J. B. Lewis, S. Norris et al., In vitro cytotoxicity of traditional versus contemporary dental ceramics, J Prosthet Dent, vol.90, issue.5, pp.452-460, 2003.

, Metal showing after implant treatment and dark gingiva, 2013.

K. L. Mittal, Polymer surface modification : relevance to adhésion, vol.3, p.394, 2009.

C. Do-nascimento, M. S. Pita, F. Fernandes, V. Pedrazzi, R. F. De-albuquerque-junior et al., Bacterial adhesion on the titanium and zirconia abutment surfaces, Clin Oral Impl. Res, vol.25, issue.3, pp.337-380, 2014.

A. Nedjat, Le matériau Peek en implantologie

, L'information dentaire Stratégie Prothétique, issue.5, pp.269-273, 2015.

E. Neumann, C. C. Villar, and F. Franca, Fracture resistance of abutment screws made of titanium, polyetheretherketone, and carbon fiber-reinforced polyetheretherketone, Braz Oral Res, vol.28, issue.1, pp.1-5, 2014.

X. Oliva, J. Oliva, J. D. Oliva, H. S. Prasad, and M. D. Rohrer, Osseointegration of Zirconia (Y-TZP) Dental Implants: A Histologic, Histomorphometric and Removal Torque Study in the Hip of Sheep, Int J Oral Implantol Clin Res, vol.4, issue.2, pp.1-9, 2013.

Z. Ozkurt and E. Kazazoglu, Zirconia Dental Implants: A Literature Review, J Oral Implantol, vol.37, issue.3, pp.367-376, 2011.

J. Partasarathy, 3D modeling, custom implants and its future perspectives in craniofacial surgery, Ann Maxillofac Surg, vol.4, issue.1, pp.9-18, 2014.

P. Perso-c?,

L. Petrovic, D. Pohle, H. Münstedt, T. Rechtenwald, K. A. Schlegel et al., Effect of ?TCP filled polyetheretherketone on osteoblast cell proliferation in vitro, J Biomed Sci, vol.13, issue.1, pp.41-46, 2006.

D. G. Poitout, Biomechanics and Biomaterials in Orthopedics. London, pp.15-21, 2004.

A. Poulsson, D. Eglin, S. Zeiter, K. Camenisch, C. Sprecher et al., Osseointegration of machined, injection moulded and oxygen plasma modified PEEK implants in a sheep model

, Biomaterials, vol.35, issue.12, pp.3717-3745, 2014.

Z. Y. Qiu, C. Chen, X. M. Wang, and I. S. Lee, Advances in the surface modification techniques of bone-related implants for last 10 years, Regen biomater, vol.1, issue.1, pp.67-79, 2014.

M. E. Ring, A thousandyears of dental implants : a definitive history-part 1

, Compend Contin Educ Dent, vol.16, issue.10, p.1062, 1995.

Y. Robert, Simulation numérique du soudage du TA6V par laser YAG impulsionnel caractérisation expérimentale et modélisation des aspects thermomécaniques associés ce procédé Sciences de l'ingénieur

, Ecole Nationale Supérieure des Mines de Paris, 2007.

V. Rodriguez, J. Sukumaran, Y. Perez, D. Baets, P. Andó et al., Tribological behaviour of the low and High viscosity PEEK against steel using differents contact pressures, Sustainable Construction and Design, vol.4, issue.2, p.10, 2013.

R. K. Roeder, G. L. Converse, R. J. Kane, and W. Yue, Hydroxyapatite-reinforced polymer biocomposites for synthetic bone substitutes, The Journal of The Minerals, Metals & Materials Society, vol.60, issue.3, pp.38-45, 2008.

J. R. Sarot, C. M. Contar, A. C. Cruz, and R. De-souza-magini, Evaluation of the stress distribution in CFR-PEEK dental implants by the three-dimensional finite element method, J Mater Sci Mater Med, vol.21, issue.7, pp.2079-2085, 2010.

L. Sennerby, A. Dasmah, B. Larsson, and M. Iverhed, Bone tissue responses to surface-modified zirconia implants: A histomorphometric and removal torque study in the rabbit, Clin Implant Dent Relat Res, vol.7, issue.1, pp.13-20, 2005.

H. Schliephake, T. Hefti, F. Schlottig, P. Gédet, and H. Staedt, Mechanical anchorage and peri-implant bone formation of surface-modified zirconia in minipigs, J Clin Periodontol, vol.37, issue.9, pp.818-828, 2010.

J. M. Schultz, Semicrystalline Polymer Matrix Materials, Composite Materials Science, vol.7, pp.73-102, 1991.

P. A. Schweitzer, Mechanical and Corrosion-Resistant Properties of Plastics and Elastomers, vol.702, 2000.

A. D. Schwitalla, M. Abou-emara, T. Spintig, J. Lackmann, and W. D. Müller,

A. D. Schwitalla and W. D. Muller, PEEK dental implants : A review of litterature, J Oral implantol, vol.39, issue.6, pp.743-752, 2013.

T. Tateishi, T. Ushida, H. Aoki, Y. Ikada, and M. Nakamura,

B. Stookey, G. Christel, P. , P. Ferrato, and A. , Round robin test for standardization of biocompatibility test procedure by cell culture method

P. J. Dans:-doherty, R. L. Williams, D. F. Williams, and A. Lee, Biomaterials-Tissue Interfaces, pp.89-97, 1992.

S. Tete, F. Mastrangelo, A. Bianchi, V. Zizzari, and A. Scarao, Collagen Fiber Orientation Around Machined Titanium and Zirconia Dental Implant Necks : An Animal study, International Journal Of Maxillofacial Implants, 2009.

E. Valentine-thon, K. Müller, G. Guzzi, S. Kreisel, and P. Ohnsorge,

M. Sandkamp, LTT-MELISA is clinically relevant for detecting and monitoring metal sensitivity, Neuro Endocrinol Lett, vol.27, issue.1, pp.17-24, 2006.

R. Van-noort and M. Barbour, Introduction to dental materials, 2013.

. Disponible, Vickers hardness test, 2016.

. Disponible, Victrex PEEK. Chemical resistance brochur

S. Disponible-;-volpe, D. Verrocchi, P. Andersson, J. Gottlow, and L. Sennerby,

, Comparison of early bacterial colonization of PEEK and titanium healing abutments using real-time PCR, App Oss Res, vol.6, pp.54-56, 2008.

A. J. Waddon, M. J. Hill, A. Keller, and D. J. Blundell, On the crystal texture of linear polyaryls (PEEK, PEK and PPS), J Mater Sci, vol.22, issue.5, pp.1773-1784, 1987.

H. Wang, M. Xu, W. Zhang, D. T. Kwok, J. Jiang et al., Mechanical and biological characteristics of diamond-like carbon coated poly aryl-ether-etherketone, Biomaterials, vol.31, issue.32, pp.8181-8188, 2010.

U. Wegst, M. Schecter, A. E. Doniusand, and P. M. Hunger, Biomaterials by freeze casting, Phil. Trans. R. Soc. A, vol.368, pp.2099-2121, 2010.

B. W. Weinberger, Ancient dentistry in the old and new world, Ann Med Hist, vol.6, p.274, 1934.

A. Wennerberg and T. Albrektsson, Implant surface beyond micron roughness : experimental and clinical knowledge of surface topography and surface chemistry, International Dentistry, vol.8, issue.6, pp.14-18, 2006.

A. Xu, X. Liu, X. Gao, F. Deng, Y. Deng et al., Enhancement of osteogenesis on micro/nano-topographical carbon fiber reinforced PEEKnanohydroxyapatite biocomposite, Mater Sci Eng C Mater Biol Appl, vol.48, pp.592-600, 2015.

, Young's modulus-density

M. Zalaznik, M. Kalin, and S. Novak, Influence of the processing temperature on the tribological and mechanical properties of poly-ether-ether-ketone (PEEK) polymer, Tribol Int, vol.94, pp.92-97, 2016.

G. Zhang, B. Wetzelb, and Q. Wanga, Tribological behavior of PEEK-based materials under mixed and boundary lubrication conditions, Tribol Int, vol.88, pp.153-161, 2015.

, Jul'y : Pré. '\idê1U : ?. A>.inRO.St'lt-Profc:;scur des l Tnivcrsit6i Juges : J. .SCI JOlf'lER-t...f.aîJ.re <le C<mférenc:e :les t:r.i?fcr. .. il?s O. JU.SJ:Jll I ~W

A. V-aill&lt;\.n&quot;l-.\&apos;laîtr~,

T. Rql!lobtenir-le-diplôme and D. , Etat de Docteur en Ch irurgie Dentaire le, 1990.

, Cl ay~'\OC pour titre : « UrJUsat101l <lu f?oJy etberethel'kffe>ne-tll llllpJanto!ogfe dental.r'e », I.e Pré:-.idenl <lujury N!\l\CY