A. L. Yerokhin, X. Nie, A. Leyland, A. Matthews, and S. J. Dowey, Plasma electrolysis for surface engineering, Surf. Coat. Technol, vol.122, pp.73-93, 1999.

P. Srinivasan, J. Liang, R. G. Balajeee, C. Blawert, M. Störmer et al., Effect of pulse frequency on the microstructure, phase composition and corrosion performance of a phosphate-based plasma electrolytic oxidation coated AM50 magnesium alloy, Appl. Surf. Sci, vol.256, pp.3928-3935, 2010.

F. Monfort, A. Berkani, E. Matykina, P. Skeldon, G. E. Thompson et al.,

A. Shimizu and . Tracer, Study of Oxide Growth during Spark Anodizing of Aluminum, J. Electrochem. Soc, vol.152, pp.382-387, 2005.

E. Matykina, A. Berkani, P. Skeldon, and G. E. Thompson, Real-time imaging of coating growth during plasma electrolytic oxidation of titanium, Electrochim. Acta, vol.53, pp.1987-1994, 2007.

A. A. Voevodin, A. L. Yerokhin, V. V. Lyubimov, M. S. Donley, and J. S. Zabinski, Characterization of wear protective AlSiO coatings formed on Al-based alloys by micro-arc discharge treatment, Surf. Coat. Technol, pp.516-521, 1996.

W. Xue, Z. Deng, Y. Lai, and R. Chen, Analysis of Phase Distribution for Ceramic Coatings Formed by Microarc Oxidation on Aluminum Alloy, J. Am. Ceram. Soc, vol.81, pp.1365-1368, 1998.

L. R. Krishna, A. S. Purnima, and G. Sundararajan, A comparative study of tribological behavior of microarc oxidation and hard-anodized coatings, Wear, vol.261, pp.1095-1101, 2006.

J. A. Curran, H. Kalkanci, Y. Magurova, and T. W. Clyne, Mullite-rich plasma electrolytic oxide coatings for thermal barrier applications, Surf. Coat. Technol, vol.201, pp.8683-8687, 2007.

K. Tillous, T. Toll-duchanoy, E. Bauer-grosse, L. Hericher, and G. Geandier, Microstructure and phase composition of microarc oxidation surface layers formed on aluminium and its alloys 2214-T6 and 7050-T74, Surf. Coat. Technol, vol.203, pp.2969-2973, 2009.

E. Arslan, Y. Totik, E. E. Demirci, Y. Vangolu, A. Alsaran et al., High temperature wear behavior of aluminum oxide layers produced by AC micro arc oxidation, Surf. Coat. Technol, vol.204, pp.829-833, 2009.

A. L. Yerokhin, L. O. Snizhko, N. L. Gurevina, A. Leyland, A. Pilkington et al., Discharge characterization in plasma electrolytic oxidation of aluminium, J. Phys. D: Appl. Phys, vol.36, pp.2110-2120, 2003.

A. L. Yerokhin, L. O. Snizhko, N. L. Gurevina, A. Leyland, A. Pilkington et al., Spatial characteristics of discharge phenomena in plasma electrolytic oxidation of aluminium alloy, Surf. Coat. Technol, pp.779-783, 2004.

C. S. Dunleavy, I. O. Golosnoy, J. A. Curran, and T. W. Clyne, Characterisation of discharge events during plasma electrolytic oxidation, Surf. Coat. Technol, vol.203, pp.3410-3419, 2009.

C. S. Dunleavy, J. A. Curran, and T. W. Clyne, Self-similar scaling of discharge events through PEO coatings on aluminium, Surf. Coat. Technol, vol.206, pp.1051-1061, 2011.

C. S. Dunleavy, J. A. Curran, and T. W. Clyne, Time dependent statistics of plasma discharge parameters during bulk AC plasma electrolytic oxidation of aluminium, Appl. Surf. Sci, vol.268, pp.397-409, 2013.

L. O. Snizhko, A. L. Yerokhin, A. Pilkington, N. L. Gurevina, D. O. Misnyankin et al.,

A. Leyland and . Matthews, Anodic processes in plasma electrolytic oxidation of aluminium in alkaline solutions, Electrochim. Acta, vol.49, pp.2085-2095, 2004.

H. F. Guo, M. Z. An, H. B. Huo, S. Xu, and L. J. Wu, Microstructure characteristic of ceramic coatings fabricated on magnesium alloys by micro-arc oxidation in alkaline silicate solution, Appl. Surf. Sci, vol.252, pp.7911-7916, 2006.

Q. Cai, L. Wang, B. Wei, and Q. Liu, Electrochemical performance of microarc oxidation films formed on AZ91D magnesium alloy in silicate and phosphate electrolytes, Surf. Coat. Technol, vol.200, pp.3727-3733, 2006.

C. Blawert, V. Heitmann, W. Dietzel, H. M. Nykyforchyn, and M. Klapkiv, Influence of electrolyte on corrosion properties of plasma electrolytic conversion coated magnesium alloys, Surf. Coat. Technol, vol.201, pp.8709-8714, 2007.

J. Liang, P. Srinivasan, C. Blawert, M. Störmer, and W. Dietzel, Electrochemical corrosion behaviour of plasma electrolytic oxidation coatings on AM50 magnesium alloy formed in silicate and phosphate based electrolytes, Electrochim. Acta, vol.54, pp.3842-3850, 2009.

Y. Cheng, F. Wu, J. Dong, X. Wu, Z. Xue et al., Comparison of plasma electrolytic oxidation of zirconium alloy in silicate-and aluminatebased electrolytes and wear properties of the resulting coatings, Electrochim. Acta, vol.85, pp.25-32, 2012.

A. L. Yerokhin, A. Shatrov, V. Samsonov, P. Shashkov, A. Pilkington et al.,

. Matthews, Oxide ceramic coatings on aluminium alloys produced by a pulsed bipolar plasma electrolytic oxidation process, Surf. Coat. Technol, vol.199, pp.150-157, 2005.

F. Jaspard-mécuson, T. Czerwiec, G. Henrion, T. Belmonte, L. Dujardin et al.,

. Beauvir, Tailored aluminium oxide layers by bipolar current adjustment in the Plasma Electrolytic Oxidation (PEO) process, Surf. Coat. Technol, vol.201, pp.8677-8682, 2007.

E. Matykina, R. Arrabal, P. Skeldon, and G. E. Thompson, Investigation of the growth processes of coatings formed by AC plasma electrolytic oxidation of aluminium, Electrochim. Acta, vol.54, pp.6767-6778, 2009.

E. V. Parfenov, A. Yerokhin, and A. Matthews, Small signal frequency response studies for plasma electrolytic oxidation, Surf. Coat. Technol, vol.203, pp.2896-2904, 2009.

P. Srinivasan, J. Liang, R. G. Balajeee, C. Blawert, M. Störmer et al., Effect of pulse frequency on the microstructure, phase composition and corrosion performance of a phosphate-based plasma electrolytic oxidation coated AM50 magnesium alloy, Appl. Surf. Sci, vol.256, pp.3928-3935, 2010.

A. Melhem, G. Henrion, T. Czerwiec, J. L. Briançon, T. Duchanoy et al.,

. Belmonte, Changes induced by process parameters in oxide layers grown by the PEO process on Al alloys, Surf. Coat. Technol, vol.205, pp.133-136, 2011.

R. O. Hussein, D. O. Northwood, and X. Nie, The influence of pulse timing and current mode on the microstructure and corrosion behaviour of a plasma electrolytic oxidation (PEO) coated AM60B magnesium alloy, J. Alloys Comp, vol.541, pp.41-48, 2012.

J. Martin, A. Melhem, I. Shchedrina, T. Duchanoy, A. Nominé et al., Effects of electrical parameters on plasma electrolytic oxidation of aluminium, Surf. Coat. Technol, vol.221, pp.70-76, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01284934

M. D. Klapkiv, State of an electrolytic plasma in the process of synthesis of oxides based on aluminum, Mater. Sci, vol.31, pp.494-499, 1996.

M. D. Klapkiv, Simulation of synthesis of oxide-ceramic coatings in discharge channels of a metal-electrolyte system, Mater. Sci, vol.35, pp.279-283, 1999.

G. Sundararajan and L. R. Krishna, Mechanisms underlying the formation of thick alumina coatings through the MAO coating technology, Surf. Coat. Technol, vol.167, pp.269-277, 2003.

L. R. Krishna, A. S. Purnima, N. P. Wasekar, and G. Sundararajan,

, Micro Arc Oxidation Coatings Deposited on Commercial Al Alloys, Metall. Mater. Trans. A, vol.38, pp.370-378, 2007.

A. L. Yerokhin, V. V. Lyubimov, and R. V. Ashitkov, Phase formation in ceramic coatings during plasma electrolytic oxidation of aluminium alloys, Ceram. Int, vol.24, pp.1-6, 1998.
DOI : 10.1016/s0272-8842(96)00067-3

E. Matykina, R. Arrabal, D. J. Scurr, A. Baron, P. Skeldon et al., Investigation of the mechanism of plasma electrolytic oxidation of aluminium using 18 O tracer, Corrosion Sci, vol.52, pp.1070-1076, 2010.

R. O. Hussein, D. O. Nie, A. Northwood, A. Yerokhin, and . Matthews, Spectroscopic study of electrolytic plasma and discharging behaviour during the plasma electrolytic oxidation (PEO) process, J. Phys. D.: Appl. Phys, vol.43, p.105203, 2010.
DOI : 10.1088/0022-3727/43/10/105203

R. O. Hussein, X. Nie, and D. O. Northwood, An investigation of ceramic coating growth mechanisms in plasma electrolytic oxidation (PEO) processing, Electrochim. Acta, vol.112, pp.111-119, 2013.
DOI : 10.1016/j.electacta.2013.08.137

J. Jovovi?, S. Stojadinovi?, N. M. ?i?ovi?, and N. Konjevi?, Spectroscopic characterization of plasma during electrolytic oxidation (PEO) of aluminium, Surf. Coat. Technol, vol.206, pp.24-28, 2011.

V. Dehnavi, B. L. Luan, D. W. Shoesmith, X. Y. Liu, and S. Rohani, Effect of duty cycle and applied current frequency on plasma electrolytic oxidation (PEO) coating growth behaviour, Surf. Coat. Technol, vol.226, pp.100-107, 2013.
DOI : 10.1016/j.surfcoat.2013.03.041

Y. Cheng, F. Wu, E. Matykina, P. Skeldon, and G. E. Thompson, The influences of microdischarge types and silicate on the morphologies and phase compositions of plasma electrolytic oxidation coatings on Zircaloy-2, Corros. Sci, vol.59, pp.307-315, 2012.

Y. Cheng, Z. Xue, Q. Wang, X. Wu, E. Matykina et al., New findings on properties of plasma electrolytic oxidation coatings from study of an Al-Cu-Li alloy, Electrochim. Acta, vol.107, pp.358-378, 2013.

Y. Cheng, M. Mao, J. Cao, and Z. Peng, Plasma electrolytic oxidation of an Al-Cu-Li alloy in alkaline aluminate electrolytes: A competition between growth and dissolution for the initial ultra-thin films, Electrochim. Acta, vol.138, pp.417-429, 2014.

R. Arrabal, E. Matykina, T. Hashimoto, P. Skeldon, and G. E. Thompson, Characterization of AC PEO coatings on magnesium alloys, vol.203, pp.2207-2220, 2009.
DOI : 10.1016/j.surfcoat.2009.02.011

A. Mehlem, , 2009.

J. Martin, P. Leone, A. Nominé, D. Veys-renaux, G. Henrion et al., Influence of electrolyte ageing on the Plasma Electrolytic Oxidation of aluminium, vol.269, pp.36-46, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01285978

J. Beauvir, , 2001.

S. Bardin, J. Briançon, F. Brochard, V. Martin, Y. Zayachuk et al., Investigating Transport of Dust Particles in Plasmas, Contrib. Plasma Phys, vol.51, pp.246-251, 2011.

N. Endstrasser, F. Brochard, V. Rohde, M. Balden, T. Lunt et al.,

. Neu, Video tracking and post-mortem analysis of dust particles from all tungsten ASDEX Upgrade, J. Nucl. Mater, vol.415, pp.1085-1088, 2011.

E. V. Parfenov, A. Yerokhin, R. R. Nevyantseva, M. V. Gorbatkov, C. Liang et al.,

. Matthews, Towards smart electrolytic plasma technologies: An overview of methodological approaches to process modelling, Surf. Coat. Technol, vol.269, pp.2-22, 2015.

A. Nominé, S. C. Troughton, A. V. Nominé, G. Henrion, and T. W. Clyne, High speed video evidence for localised discharge cascades during plasma electrolytic oxidation, Surf. Coat. Technol, vol.269, pp.125-130, 2015.

S. C. Troughton, A. Nominé, J. Dean, and T. W. Clyne, Effect of individual discharge cascades on the microstructure of plasma electrolytic oxidation coatings, Appl. Surf. Sci, vol.389, pp.260-269, 2016.

Y. Gao, A. Yerokhin, E. Parfenov, and A. Matthews, Application of Voltage Pulse Transient Analysis during Plasma Electrolytic Oxidation for Assessment of Characteristics and Corrosion Behaviour of Ca-and P-containing Coatings on Magnesium, Electrochim.Acta, pp.218-230, 2014.

A. R. Fatkullin, E. V. Parfenov, A. Yerokhin, D. M. Lazarev, and A. Matthews, Effect of positive and negative pulse voltages on surface properties and equivalent circuit of the plasma electrolytic oxidation process, Surf. Coat. Technol, vol.284, pp.427-437, 2015.