F. Ben-saada and K. Elleuch, Damage of stainless steel components by olive paste, Tribol. Trans, 2015.

T. Wang, J. Yu, and B. Dong, Surface nanocrystallization induced by shot peening and its effect on corrosion resistance of 1Cr18Ni9Ti stainless steel, Surf. Coat. Technol, vol.200, pp.4777-4781, 2006.

K. Lu and J. Lub, Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment, Mater. Sci. Eng. A, vol.375, pp.38-45, 2004.

F. Ben-saada, Z. Antar, K. Elleuch, and P. Ponthiaux, On the tribocorrosion behavior of 304L stainless steel in olive pomace/tap water filtrate, pp.509-517, 2015.

J. Perret, E. Boehm-courjault, M. Cantoni, S. Mischler, A. Beaudouin et al., FIB characterisation of subsurface deformation during tribocorrosion of stainless steel in sulphuric acid, Wear, vol.269, pp.383-393, 2010.

B. Liu, X. Zhang, G. Xiao, and Y. Lu, Phosphate chemical conversion coatings on metallic substrates for biomedical application: a review

S. Zhang, C. L. Wu, C. H. Zhang, M. Guan, and J. Z. Tan, Laser surface alloying of FeCoCrAlNi high-entropy alloy on 304 stainless steel to enhance corrosion and cavitation erosion resistance, Opt. Laser Technol, vol.84, pp.23-31, 2016.

W. J. Yang, M. Zhang, Y. H. Zhao, M. L. Shen, H. Lei et al., Enhancement of mechanical property and corrosion resistance of 316 L stainless steels by low temperature arc plasma nitriding, Surf. Coat. Technol, vol.298, pp.64-72, 2016.

W. Yanfang, L. Qinglong, X. Lijun, and S. Zhiqiang, Laser cladding Fe-Cr-Si-P amorphous coatings on 304L stainless, Rare Met. Mater. Eng, vol.43, issue.2, pp.274-0277, 2014.

A. Bahri, E. Kaçar, S. S. Akkaya, K. Elleuch, and M. Ürgen, Wear protection potential of TiN coatings for 304 stainless steels used in rotating parts during olive oil extraction, J. Surf. Coat

F. Maury and F. Duminica, TiOxNy coatings grown by atmospheric pressure metal organic chemical vapor deposition, Surf. Coat. Technol, vol.205, pp.1287-1293, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00806194

B. Mahmoudi, M. J. Torkamany, A. R. Sabour-rouh-aghdam, and J. Sabbaghzade, Laser surface hardening of AISI 420 stainless steel treated by pulsed Nd:YAG laser, Mater. Des, vol.31, pp.2553-2560, 2010.

W. Pacquentin, N. Caron, and R. Oltra, Effect of microstructure and chemical composition on localized corrosion resistance of a AISI 304L stainless steel after nanopulsed-laser surface melting, Appl. Surf. Sci, vol.356, pp.561-573, 2015.

T. Balusamy, T. S. Sankara-narayanan, and K. Ravichandran, Il Song Park, Min Ho Lee, Influence of surface mechanical attrition treatment (SMAT) on the corrosion behaviour of AISI 304 stainless steel, Corros. Sci, vol.74, pp.332-344, 2013.

X. J. Cao, Y. S. Pyoun, and R. Murakami, Fatigue properties of a S45C steel subjected to ultrasonic nanocrystal surface modification, Appl. Surf. Sci, vol.256, pp.6297-6303, 2010.

C. M. Suh, G. H. Song, M. S. Suh, and Y. S. Pyoun, Fatigue and mechanical characteristics of nano-structured tool steel by ultrasonic cold forging technology, Mater. Sci. Eng.: A, vol.443, pp.101-106, 2007.

S. Bagherifard and M. Guagliano, Fatigue behavior of a low-alloy steel with nanostructured surface obtained by severe shot peening, Eng. Fract. Mech, vol.81, pp.56-68, 2012.

S. Bagherifard and M. Guagliano, Influence of mesh parameters on FE simulation of severe shot peening (SSP) aimed at generating nanocrystallized surface layer, Procedia Eng, vol.10, pp.2923-2930, 2011.

Z. Ni, X. Wang, J. Wang, and E. Wu, Characterization of the phase transformation in a nanostructured surface layer of 304 stainless steel induced by high-energy shot peening, Physica B, vol.334, pp.211-228, 2003.

Y. Todaka, M. Umemoto, and K. Tsuchiya, Comparison of nanocrystalline surface layer in steels formed by air blast and ultrasonic shot peening, Mater. Trans, vol.45, pp.376-379, 2004.

P. Tadge, P. Gupta, and C. Sasikumar, Surface nano-crystallization of AISI 304 stainless steel through shot peening technique, Mater. Today: Proc, vol.2, pp.3245-3250, 2015.

X. Y. Wang and D. Y. Li, Mechanical and electrochemical behavior of nanocrystalline surface of 304 stainless steel, Electrochim. Acta, vol.47, pp.3939-3947, 2002.

X. Y. Wang and D. Y. Li, Mechanical, electrochemical and tribological properties of nano-crystalline surface of 304 stainless steel, Wear, vol.255, pp.836-845, 2003.

C. Zhong, L. Liu, Y. Wu, Y. Deng, B. Shen et al., Diffusion behavior of aluminum in the surface layer of iron processed by shot peening, Mater. Lett, vol.64, pp.1407-1409, 2010.

G. Liu, S. C. Wang, X. F. Lou, J. Lu, and K. Lu, Low carbon steel with nanostructured surface layer induced by high-energy shot peening, Scr. Mater, vol.44, pp.1791-1795, 2001.

H. Li-feng, W. Ying-hui, L. Bao-sheng, and X. , Bing-she, Microstructure evolution of AZ91D induced by high energy shot peening, Trans. Nonferr. Met. Soc. China, vol.18, pp.1053-1057, 2008.

W. Yan, L. Fang, Z. Zheng, K. Sun, and Y. Xu, Effect of surface nanocrystallization on abrasive wear properties in Hadfieldsteel, Tribol. Int, vol.42, pp.634-641, 2009.

N. Diomidis, J. P. Celis, P. Ponthiaux, and F. Wenger, Tribocorrosion of stainless steel in sulfuric acid: Identification of corrosion-wear components and effect of contact area, Wear, vol.269, pp.93-103, 2010.
URL : https://hal.archives-ouvertes.fr/hal-01247265

N. Diomidis, J. P. Celis, P. Ponthiaux, and F. Wenger, A methodology for the assessment of the tribocorrosion of passivating: metallic materials, Lubr. Sci, vol.21, pp.53-67, 2009.
URL : https://hal.archives-ouvertes.fr/hal-01247665

T. Prezeau, T. Muller, M. Baron, J. Samuel, and E. Dransar, Surface Treatment of A Metal Part

T. Prezeau, T. Muler, E. Dransar, and Y. Giraud, Amélioration par un prétraitement mécanique de NanoPeening ® des performances des traitements thermochimiques, Traitements Mat, pp.37-43, 2011.

C. Morel and M. Guagliano, Surface nanostructuring through a technique derived from shot-peening: recent advances, The Shot Peening | Blast Cleaning Library

A. Van-herpen, B. Reynier, and C. Phalippou, Effect of test duration on impact/sliding wear damage of 304L stainless steel at room temperature: metallurgical and micromechanical investigations, Wear, vol.249, pp.37-49, 2001.

Z. Ni, X. Wang, J. Wang, and E. Wu, Characterization of the phase transformation in a nanostructured surface layer of 304 stainless steel induced by high-energy shot peening, Physica B, vol.334, pp.221-228, 2003.

C. Ye, A. Telang, A. S. Gill, S. Suslov, Y. Idell et al., Gradient nanostructure and residual stresses induced by Ultrasonic Nano-crystal Surface Modification in 304 austenitic stainless steel for high strength and high ductility, Mater. Sci. Eng. A, vol.613, pp.274-288, 2014.

S. J. Lee, Y. M. Park, and Y. K. Lee, Reverse transformation mechanism of martensiteto austeniten a metastable austenitic alloy, Mater. Sci. Eng. A, vol.515, pp.32-37, 2009.

R. Wanga, Z. Zhengb, Q. Zhoua, and Y. Gaoa, Effect of surface nanocrystallization on the sensitization anddesensitization behavior of Super 304H stainless steel, Corros. Sci, vol.111, pp.728-741, 2016.

M. Sato, N. Tsuji, Y. Minamino, and Y. Koizumi, Formation of nanocrystalline surface layers in various metallic materials by near surface severe plastic deformation, Sci. Technol. Adv. Mater, vol.5, pp.145-152, 2004.

S. Bagherifard, I. Fernandez-pariente, R. Ghelichi, and M. Guagliano, Effect of severe shot peening on microstructure and fatigue strength of cast iron, Int. J. Fatigue, vol.65, pp.64-70, 2014.

H. J. Fecht and G. C. Hadjipanayis, Nanophase Materials, 1994.

R. A. Silva and M. A. Barbousa, Electrochemical behaviour of laser treated AISI 316L Stainless stell surfaces in physiological solution, Clin. Mater, vol.7, pp.31-58, 1991.

K. E. Heusler, Fundamental aspects of the passivation of metals and semiconductors, Mater. Sci. Forum, vol.9, pp.185-188, 1995.

M. B. Ives, J. L. Luo, and J. Rodda, Passivity of metals and semiconductors, Proceedings of the Electrochemical Society Pennington, pp.99-141, 2000.

P. Marcus and V. Maurice, Passivation of Metals and Semiconductors, and Properties of Thin Oxide Layers, pp.0-444, 2006.

J. Jiang, M. M. Stack, and A. Neville, Modelling the tribo-corrosion interaction in aqueous sliding conditions, Tribol. Int, vol.35, pp.669-679, 2002.

D. A. Green, R. Lewis, and J. Cripps, Friction and wear testing for a down-hole oil well centralizer, Wear, vol.263, pp.57-64, 2007.

R. K. Gupta and N. Birbilis, The influence of nanocrystalline structure and processing route on corrosion of stainless steel: a review, Corros. Sci, pp.1-15, 2014.

K. Hashimoto, K. Asami, and K. Teramoto, An x-ray photo-electron spectroscopic study on the role of molybdenum in increasing the corrosion resistance of ferritic stainless steels in HC1, Corros. Sci, vol.19, pp.3-14, 1979.

W. Yan, L. Fang, Z. Zheng, K. Sun, and Y. Xu, Effect of surface nanocrystallization on abrasive wear properties in Hadfield steel, Tribol. Int, vol.42, pp.634-641, 2009.

J. S. Tang and C. C. Koch, The Hall-Petch relationship in nanocrystalline iron produced by ball milling, Scr. Metall. Mater, vol.24, pp.1599-1604, 1990.