, Pol. J. Environ. Stud, vol.25, issue.3, pp.951-957

A. D. Bas, H. Deveci, and E. Y. Yazici, Bioleaching of copper from low grade scrap TV circuit boards using mesophilic bacteria, Hydrometallurgy, vol.138, pp.65-70, 2013.

H. Brandl, R. Bosshard, and M. Wegmann, Computer-munching microbes: metal leaching from electronic scrap by bacteria and fungi, Hydrometallurgy, vol.59, pp.319-326, 2001.

C. G. Bryan, E. L. Watkin, T. J. Mccredden, Z. R. Wong, S. T. Harrison et al., The use of pyrite as a source of lixiviant in the bioleaching of electronic waste, Hydrometallurgy, vol.152, pp.33-43, 2015.

C. Cerruti, G. Curutchet, and E. Donati, Bio-dissolution of spent nickel-cadmium batteries using Thiobacillus ferrooxidans, Journal of Biotechnology, vol.62, pp.209-219, 1998.

S. Chen, Y. Yang, C. Liu, F. Dong, and B. Liu, Column bioleaching copper and its kinetics of waste printed circuit boards (WPCBs) by Acidithiobacillus ferrooxidans, Chemosphere, vol.141, pp.162-168, 2015.

M. S. Choi, K. S. Cho, D. S. Kim, and D. J. Kim, Microbial recovery of copper from printed circuit boards of waste computer by Acidithiobacillus ferrooxidans, Journal of environmental science and health, vol.39, pp.2973-2982, 2004.

N. J. Coram and D. E. Rawlings, Molecular relationship between two groups of the genus Leptospirillum and the finding that Leptospirillum ferriphilum sp. nov. dominates South African commercial biooxidation tanks that operate at 40°C, Applied and environmental microbiology, pp.838-845, 2002.

W. Gu, J. Bai, J. Dai, C. Zhang, W. Yuan et al., Characterization of extreme acidophile bacteria (Acidithiobacillus ferrooxidans) bioleaching copper from flexible PCB by ICP-AES, Journal of Spectroscopy, p.269351, 2014.

W. Gu, J. Bai, B. Dong, X. Zhuang, J. Zhao et al., Catalytic effect of graphene in bioleaching copper from waste printed circuit boards by Acidithiobacillus ferrooxidans, Hydrometallurgy, vol.171, pp.172-178, 2017.

W. Gu, J. Bai, B. Dong, X. Zhuang, J. Zhao et al., Enhanced bioleaching efficiency of copper from waste printed circuit board driven by nitrogen-doped carbon nanotubes modified electrode, Chemical Engineering Journal, vol.324, pp.122-129, 2017.

A. G. Guezennec, K. Bru, J. Jacob, and P. Hugues, Co-processing of sulfidic mining wastes and metal-rich post-consumer wastes by biohydrometallurgy, Minerals Engineering, vol.75, pp.45-53, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01102658

A. G. Guezennec, C. Joulian, C. Delort, F. Bodénan, S. Hedrich et al., CO 2 mass transfer in bioleaching reactors: CO 2 enrichment applied to a complex copper concentrate, Hydrometallurgy, vol.180, pp.277-286, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01989040

A. G. Guezennec, C. Joulian, J. Jacob, A. Archane, D. Ibarra et al., Influence of dissolved oxygen on the bioleaching efficiency under oxygen enriched atmosphere, Minerals Engineering, vol.106, pp.64-70, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01427774

P. M. Gy, Sampling of heterogeneous and dynamic material systems, theories of heterogeneity, sampling and homogeneizing, p.653, 1992.

S. Hedrich, A. Guezennec, M. Charron, A. Schippers, and C. Joulian, Quantitative Monitoring of Microbial Species during Bioleaching of a Copper Concentrate, Frontiers in Microbiology, p.7, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01427755

A. Hubau, A. Chagnes, M. Minier, S. Touzé, S. Chapron et al., , 2019.

, Recycling-oriented methodology to sample and characterize the metal composition of waste Printed Circuit Boards, Waste Management, vol.91, pp.62-71

A. Hubau, M. Minier, A. Chagnes, C. Joulian, C. Perez et al., Continuous production of a biogenic ferric iron lixiviant for the bioleaching of printed circuit boards (PCBs), Hydrometallurgy, vol.180, pp.180-191, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01989046

S. Ilyas, M. A. Anwar, S. B. Niazi, and M. A. Ghauri, Bioleaching of metals from electronic scrap by moderately thermophilic acidophilic bacteria, Hydrometallurgy, vol.88, pp.180-188, 2007.

S. Ilyas and J. C. Lee, Bioleaching of metals from electronic scrap in a stirred tank reactor, Hydrometallurgy, vol.149, pp.50-62, 2014.

S. Ilyas, J. C. Lee, and R. A. Chi, Bioleaching of metals from electronic scrap and its potential for commercial exploitation, Hydrometallurgy, pp.138-143, 2013.

S. Ilyas, C. Ruan, H. N. Bhatti, M. A. Ghauri, and M. A. Anwar, Column bioleaching of metals from electronic scrap, Hydrometallurgy, vol.101, pp.135-140, 2010.

A. I?ildar, J. Van-de-vossenberg, E. R. Rene, E. D. Van-hullebusch, and P. N. Lens, Twostep bioleaching of copper and gold from discarded printed circuit boards (PCB), Waste Management, vol.57, pp.149-157, 2015.

D. B. Johnson, C. Joulian, P. Hugues, and K. B. Hallberg, Sulfobacillus benefaciens sp. nov., an acidophilic facultative anaerobic Firmicute isolated from mineral bioleaching operations, Extremophiles, vol.12, pp.789-798, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00643276

G. Liang, Y. Mo, and Q. Zhou, Novel strategies of bioleaching metals from printed circuit boards (PCBs) in mixed cultivation of two acidophiles, Enzyme and Microbial Technology, vol.47, pp.322-326, 2010.

G. Liang, J. Tang, W. Liu, and Q. Zhou, Optimizing mixed culture of two acidophiles to improve copper recovery from printed circuit boards (PCBs), Journal of Hazardous Materials, pp.238-245, 2013.

G. Liang, P. Ti, W. Liu, and B. Wang, Enhanced bioleaching efficiency of copper from waste printed circuit boards (PCBs) by dissolved oxygen-shifted strategy in Acidithiobacillus ferrooxidans, J Mater Cycles Waste Manag, vol.18, pp.742-751, 2016.

J. Mäkinen, J. Bachér, T. Kaartinen, M. Wahlström, and J. Salminen, The effect of flotation and parameters for bioleaching of printed circuit boards, Minerals Engineering, vol.75, pp.26-31, 2015.

A. Mrá?iková, R. Marcin?áková, J. Kaduková, and O. Velgosová, Influence of bacterial culture to copper bioleaching from printed circuit boards, J. Polish Mineral Engineering Scoiety, pp.59-62, 2013.

A. Mrá?iková, R. Marcin?áková, J. Kaduková, O. Velgosová, and M. Balintova, Influence of used bacterial culture on zinc and aluminium bioleaching from printed circuit boards, Nova Biotechnologica et Chimica, pp.45-51, 2015.

A. Mrá?iková, J. Kaduková, R. Marcin?áková, O. Velgosová, J. Willner et al., The effect of specific conditions on Cu, Ni, Zn and Al recovery from PCBs waste using acidophilic bacterial strains, Arch. Metall. Mater, vol.61, pp.261-264, 2016.

H. Nie, C. Yang, N. Zhu, P. Wu, T. Zhang et al., Isolation of Acidithiobacillus ferrooxidans strain Z1 and its mechanism of bioleaching copper from waste printed circuit boards, J. Chem. Technol. Biotechnol, vol.90, pp.714-721, 2014.

H. Nie, N. Zhu, Y. Cao, Z. Xu, and P. Wu, Immobilization of Acidithiobacillus ferrooxidans on Cotton Gauze for the Bioleaching ofWaste Printed Circuit Boards, vol.177, pp.675-688, 2015.

A. Priya and S. Hait, Extraction of metals from high grade waste printed circuit board by conventional and hybrid bioleaching using Acidithiobacillus ferrooxidans, Hydrometallurgy, vol.177, pp.132-139, 2018.

M. L. Rodrigues, V. A. Leão, O. Gomes, F. Lambert, D. Bastin et al., Copper extraction from coarsely ground printed circuit boards using moderate thermophilic bacteria in a rotating-drum reactor, Waste Management, vol.41, pp.148-158, 2015.

M. B. Shah, D. R. Tipre, and S. R. Dave, Chemical and biological processes for multi-metal extraction from waste printed circuit boards of computers and mobile phones, Waste Management & Research, vol.32, issue.11, pp.1134-1141, 2014.

M. B. Shah, D. R. Tipre, M. S. Purohit, and S. R. Dave, Development of two-step process for enhanced biorecovery of Cu-Zn-Ni from computer printed circuit boards, Journal of Bioscience and Bioengineering, vol.120, issue.2, pp.167-173, 2015.

R. A. Silva, J. Park, E. Lee, J. Park, S. Q. Choi et al., Influence of bacterial adhesion on copper extraction from printed circuit boards, Separation and Purification Technology, vol.143, pp.169-176, 2015.

A. B. Sodha, S. A. Qureshi, B. R. Khatri, D. R. Tipre, and S. R. Dave, Enhancement in Iron Oxidation and Multi-metal Extraction from Waste Television Printed Circuit Boards by Iron Oxidizing Leptospirillum ferriphilum Isolated from Coal Sample, Waste Biomass Valor, pp.1-10, 2017.

E. Y. Sum, The recovery of metals from electronic scrap, Review of Extractive Metallurgy, pp.53-61, 1991.

A. Tuncuk, V. Stazi, A. Akcil, E. Y. Yazici, and H. Deveci, Aqueous metal recovery techniques from e-scrap: Hydrometallurgy in recycling, Miner. Eng, vol.25, pp.28-37, 2012.

J. Wang, J. Bai, and B. Liang, Bioleaching of metals from printed wire boards by, 2009.

, Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans and their mixture, Journal of Hazardous Materials, vol.172, pp.1100-1105

, from steel pickling waste liquor by two-step hydrometallurgical method, Waste Management, vol.71, pp.411-419

S. Wang, Y. Zheng, W. Yan, L. Chen, G. D. Mahadevan et al., Enhanced bioleaching efficiency of metals from E-wastes driven by biochar, Journal of Hazardous Materials, vol.320, pp.393-400, 2016.

H. R. Watling, F. A. Perrot, and D. W. Shiers, Comparison of selected characteristics of Sulfobacillus species and review of their occurrence in acidic and bioleaching environments, 2008.

, Hydrometallurgy, vol.93, pp.57-65

J. Willner, Influence of physical and chemical factors on biological leaching process of copper from printed circuit boards, Metabk, vol.52, issue.2, pp.189-192, 2013.

S. Willscher, M. Katzschner, K. Jentzsch, S. Matys, and H. Pöllmann, Microbial leaching of metals from printed circuit boards, Advanced Materials Research, pp.99-102, 2007.

M. C. Xia, Y. P. Wang, T. J. Peng, L. Shen, R. L. Yu et al., Recycling of metals from pretreated waste printed circuit boards effectively in stirred tank reactor by a moderately thermophilic culture, Journal of Bioscience and Bioengineering, vol.123, issue.6, pp.714-721, 2017.

Y. Xiang, P. Wu, N. Zhu, T. Zhang, W. Liu et al., Bioleaching of copper from waste printed circuit boards by bacterial consortium enriched from acid mine drainage, Journal of Hazardous Materials, vol.184, pp.812-818, 2010.

L. H. Yamane, V. T. Moraes, J. A. Tenório, and D. C. Espinosa, Influence of Bacterial Adaptation on Copper Bioleaching from Printed Circuit Boards, Adv Biotech & Micro, vol.9, issue.3, 2018.

T. Yang, Z. Xu, J. Wen, and L. Yang, Factors influencing bioleaching copper from waste printed circuit boards by Acidithiobacillus ferrooxidans, Hydrometallurgy, vol.97, pp.29-32, 2009.

Y. Yang, S. Chen, S. Li, M. Chen, H. Chen et al., Bioleaching waste printed circuit boards by Acidithiobacillus ferrooxidans and its kinetics aspect, Journal of Biotechnology, vol.173, pp.24-30, 2014.

G. Yue, A. G. Guezennec, and E. Asselin, Extended validation of an expression to predict ORP and iron chemistry: Application to complex solutions generated during the acidic leaching or bioleaching of printed circuit boards, Hydrometallurgy, vol.164, pp.334-342, 2016.

N. Zhu, Y. Xiang, T. Zhang, P. Wu, Z. Dang et al., Bioleaching of metal concentrates of waste printed circuit boards by mixed culture of acidophilic bacteria, Journal of Hazardous Materials, vol.192, pp.614-619, 2011.