,

C. Sanchez, F. A. Boudaoud, H. Hoppe, S. Camargo, and M. , Polymer recycling in 428 an open-source additive manufacturing context: Mechanical issues, Addit. Manuf, vol.429, pp.87-105, 2017.

J. Dong, M. Li, L. Zhou, S. Lee, C. Mei et al., The influence of 431 grafted cellulose nanofibers and postextrusion annealing treatment on selected 432 properties of poly(lactic acid) filaments for 3D printing, J. Polym. Sci. Part B, p.433, 2017.

, Polym. Phys, vol.55, pp.847-855

M. A. Elsawy, K. Kim, J. Park, and A. Deep, Hydrolytic degradation of 435 polylactic acid (PLA) and its composites, Renew. Sustain. Energy Rev, vol.79, pp.1346-436, 2017.

D. Filgueira, S. Holmen, J. K. Melbø, D. Moldes, A. T. Echtermeyer et al., , vol.438

G. , Enzymatic-Assisted Modification of Thermomechanical Pulp Fibers To 439, 2017.

, Improve the Interfacial Adhesion with Poly(lactic acid) for 3D Printing, ACS 440 Sustain. Chem. Eng, vol.5, pp.9338-9346

,

S. Fu, X. Feng, B. Lauke, and Y. Mai, Effects of particle size, p.443, 2008.

, particle/matrix interface adhesion and particle loading on mechanical properties 444 of particulate-polymer composites, Compos. Part B Eng, vol.39, pp.933-961

,

D. García, W. Glasser, A. Pizzi, S. Paczkowski, and M. Laborie, Modification of 447 condensed tannins: from polyphenol chemistry to materials engineering, New J 448 Chem, vol.40, pp.36-49, 2015.

D. E. García, W. G. Glasser, A. Pizzi, S. Paczkowski, and M. Laborie, , 2015.

, Hydroxypropyl tannin from Pinus pinaster bark as polyol source in urethane 451 21 chemistry, Eur. Polym. J, vol.67, pp.152-165

,

M. Gaugler, W. Grigsby, D. Harper, and T. Rials, Chemical imaging of the spatial 454 distribution and interactions of tannin dispersal in bioplastic systems, Adv. Mater, 2007.

. Res, , pp.173-176

J. Ge, X. Shi, M. Cai, R. Wu, and M. Wang, A novel biodegradable antimicrobial 457 PU foam from wattle tannin, J. Appl. Polym. Sci, vol.90, pp.2756-2763, 2003.

,

E. Gkartzou, E. P. Koumoulos, and C. A. Charitidis, Production and 3D printing 460 processing of bio-based thermoplastic filament, Manuf. Rev, vol.4, p.1, 2017.

,

W. Grigsby, J. Bridson, C. Lomas, and H. Frey, Evaluating Modified Tannin Esters 463 as Functional Additives in Polypropylene and Biodegradable Aliphatic Polyester, 2014.

, Macromol Mater Eng, vol.299, pp.1251-1258

W. Grigsby and J. Kadla, Evaluating Poly(lactic acid) Fiber Reinforcement with 466 Modified Tannins, Macromol Mater Eng, vol.299, pp.368-378, 2014.

,

W. J. Grigsby, J. H. Bridson, C. Lomas, and J. Elliot, , p.469, 2013.

, Tannins and Their Impact on the Properties of Poly(Lactic Acid), vol.5, pp.470-344

W. J. Grigsby, J. H. Bridson, and C. Schrade, Modifying biodegradable plastics with 472 additives based on condensed tannin esters, J Appl Polym Sci, vol.132, 2015.

R. Guo, Z. Ren, H. Bi, Y. Song, and M. Xu, Effect of toughening agents on the 475 properties of poplar wood flour/poly (lactic acid) composites fabricated with 476 Fused Deposition Modeling, Eur. Polym. J, vol.107, pp.34-45, 2018.

,

T. Hussain, M. Tausif, and M. Ashraf, A review of progress in the dyeing of eco-479 friendly aliphatic polyester-based polylactic acid fabrics, J. Clean. Prod, vol.108, pp.476-483, 2015.

D. Kai, M. J. Tan, P. L. Chee, Y. K. Chua, Y. L. Yap et al., Towards lignin-482 based functional materials in a sustainable world, Green Chem, vol.18, pp.1175-1200, 2016.

,

M. Karamanlioglu, R. Preziosi, and G. D. Robson, Abiotic and biotic environmental 485 degradation of the bioplastic polymer poly(lactic acid): A review, 2017.

. Stab, , vol.137, pp.122-130

V. Koleckar, K. Kubikova, Z. Rehakova, K. Kuca, D. Jun et al., , vol.488, 2008.

, Rev. Med. Chem, vol.8, pp.436-447

L. So, V. L. He, L. Xin, and J. H. , Bio-inspired colouration on various textile 491 materials using a novel catechol colorant, RSC Adv, vol.4, pp.41081-41086, 2014.

,

J. Lee, J. An, and C. K. Chua, Fundamentals and applications of 3D printing for 494 novel materials, Appl. Mater. Today, vol.7, pp.120-133, 2017.

,

T. Li, J. Aspler, and A. Kingsland, , 2016.

M. Technologies, . Opportunities-for-the, and . Forest, 498 INDUSTRY. Can. Makes. URL

J. Liao, N. Brosse, A. Pizzi, and S. Hoppe, Dynamically Cross-Linked Tannin as a 501 Reinforcement of Polypropylene and UV Protection Properties, Polymers, vol.11, 2019.

J. Liu, L. Sun, W. Xu, Q. Wang, S. Yu et al., Current advances and future 504 perspectives of 3D printing natural-derived biopolymers, Carbohydr. Polym, vol.207, pp.505-297, 2019.

H. Long, Z. Wu, Q. Dong, Y. Shen, W. Zhou et al., , 2019.

, Mechanical and thermal properties of bamboo fiber reinforced 508 polypropylene/polylactic acid composites for 3D printing, Polym. Eng. Sci, vol.59, pp.509-247

C. Luo, W. Grigsby, N. Edmonds, A. Easteal, and J. Al-hakkak, Synthesis, 511 characterization, and thermal behaviors of tannin stearates prepared from 512 quebracho and pine bark extracts, J. Appl. Polym. Sci, vol.17, pp.352-360, 2010.

,

S. Lyu and D. Untereker, Degradability of Polymers for Implantable Biomedical 515, 2009.

, Devices. Int. J. Mol. Sci, vol.10, pp.4033-4065

A. J. Müller, M. Ávila, G. Saenz, and J. Salazar, , p.517, 2014.

, Polymer 518 Chemistry Series, PLA-based Materials, pp.66-98

,

M. Murariu and P. Dubois, PLA composites: From production to properties, 2016.

, PLA biodegradable polymers, vol.107, pp.17-46

,

N. A. Nguyen, S. H. Barnes, C. C. Bowland, K. M. Meek, K. C. Littrell et al., , p.524

A. K. Naskar, A path for lignin valorization via additive manufacturing of 525 high-performance sustainable composites with enhanced 3D printability, Sci. Adv, vol.526, issue.4, 2018.

A. Nicollin, X. Zhou, A. Pizzi, W. Grigsby, K. Rode et al., MALDI-528 TOF and 13C NMR analysis of a renewable resource additive-Thermoplastic 529 acetylated tannins, Ind. Crops Prod, vol.49, pp.851-857, 2013.

,

K. J. Olejar, S. Ray, and P. A. Kilmartin, Enhanced antioxidant activity of polyolefin 532 films integrated with grape tannins: Enhanced antioxidant activity of polyolefin 533 films integrated with grape tannins, J. Sci. Food Agric, vol.96, pp.2825-2831, 2016.

,

A. Pizzi, Tannin-Based Adhesives, J. Macromol. Sci. Part C, vol.18, pp.247-315, 1980.
URL : https://hal.archives-ouvertes.fr/hal-01599534

,

J. Ren, Biodegradable poly (lactic acid) synthesis, modification, processing and 538 applications, 2011.

M. D. Samper, E. Fages, O. Fenollar, T. Boronat, and R. Balart, The potential of 540 flavonoids as natural antioxidants and UV light stabilizers for polypropylene, 2013.

, Appl. Polym. Sci, vol.129, pp.1707-1716

L. E. Scheyer and A. Chiweshe, Application and Performance of Disperse Dyes on, vol.543, p.23, 2001.

, Polylactic Acid (PLA) Fabric. AATCC Mag, vol.1, pp.44-48

H. Shnawa, M. Khaleel, and F. Muhamed, Oxidation of HDPE in the Presence of 545 PVC Grafted with Natural Polyphenols (Tannins) as Antioxidant, J. Polym. Chem, vol.546, issue.05, pp.9-16, 2015.

B. C. Smith, The C=O Bond, Part IV: Acid Anhydrides [WWW Document, vol.548, 2018.

K. Tappa and U. Jammalamadaka, Novel Biomaterials Used in Medical, vol.3, p.551, 2018.

, Techniques. J. Funct. Biomater, vol.9

Y. Tokiwa and B. P. Calabia, Biodegradability and biodegradation of poly(lactide), 2006.

, Appl. Microbiol. Biotechnol, vol.72, pp.244-251

E. D. Tomak, F. Arican, O. Gonultas, and E. D. Sam, Influence of tannin containing 556 coatings on weathering resistance of wood: Water based transparent and opaque 557 coatings, 2018.

C. Vila, V. Santos, B. Saake, and J. C. Parajó, Manufacture, Characterization, and 559 Properties of Poly-(lactic acid) and its Blends with Esterified Pine Lignin, 2016.

, BioResources, vol.11, pp.5322-5332

W. Xu, A. Pranovich, P. Uppstu, X. Wang, D. Kronlund et al., , vol.562

N. Moritz, M. Preis, N. Sandler, S. Willför, and C. Xu, Novel biorenewable 563 composite of wood polysaccharide and polylactic acid for three dimensional 564 printing, Carbohydr. Polym, vol.187, pp.51-58, 2018.

,

C. Yamoum, J. Maia, and R. Magaraphan, Rheological and thermal behavior of PLA 567 modified by chemical crosslinking in the presence of ethoxylated bisphenol A 568 dimethacrylates 28, pp.102-112, 2017.

G. H. Yew, A. M. Mohd-yusof, Z. A. Ishak, and U. S. Ishiaku, Water absorption 570 and enzymatic degradation of poly(lactic acid)/rice starch composites, 2005.

. Degrad and . Stab, , vol.90, pp.488-500

,

Y. Zhai, J. Wang, H. Wang, T. Song, W. Hu et al., Preparation and 574 Characterization of Antioxidative and UV-Protective Larch Bark Tannin/PVA 575 Composite Membranes, Molecules, vol.23, p.2073, 2018.

,

L. Zhang, S. Lv, C. Sun, L. Wan, H. Tan et al., Effect of MAH-g-PLA on 578 the Properties of Wood Fiber/Polylactic Acid Composites, Polymers, vol.9, 2017.