A. Abhinandan and . Hollander, Localized deposition of hydrocarbon using plasma activated chemical vapour deposition, Fraunhofer Institute for Applied Polymer Research IAP and Thin Films IST, vol.457, pp.241-245, 2004.

G. Adams, J. Banks, C. Frazier, U. Toodi, and M. Lagoudas, , 2018.

J. Alaman, R. Alicante, J. I. Pena, and C. Sanchez-somolinos, Inkjet Printing of Functional Materials for Optical and Photonic Applications, vol.9, p.910, 2016.

R. J. Anthony, K. Y. Cheng, Z. C. Holman, R. J. Holmes, and U. R. Kortshagen, An All-Gas-Phase Approach for the Fabrication of Silicon Nanocrystal Light-Emitting Devices, Nano Lett, vol.12, pp.2822-2825, 2012.

I. Bahnini, M. Rivette, A. Rechia, A. Siadat, and A. Elmesbahi, Additive manufacturing technology: the status, applications, and prospects, Int J Adv Manuf Tech, vol.97, pp.147-161, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02309255

C. R. Barry, J. Gu, and H. O. Jacobs, Charging process and coulomb-force-directed printing of nanoparticles with sub-100-nm lateral resolution, Nano Lett, vol.5, pp.2078-2084, 2005.

C. R. Barry, N. Z. Lwin, W. Zheng, and H. O. Jacobs, Printing nanoparticle building blocks from the gas phase using nanoxerography, Appl. Phys. Lett, vol.83, pp.5527-5529, 2003.

T. Belmonte, R. P. Gries, G. Cardoso, F. Arnoult, G. Kosior et al., Chemical vapour deposition enhanced by atmospheric microwave plasmas: a large-scale industrial process or the next nanomanufacturing tool?, Plasma Sources Sci T, vol.20, p.24004, 2011.
URL : https://hal.archives-ouvertes.fr/hal-02190534

T. Belmonte, G. Henrion, and T. Gries, Nonequilibrium Atmospheric Plasma Deposition, J. Therm. Spray Technol, vol.20, pp.744-759, 2011.
URL : https://hal.archives-ouvertes.fr/hal-02190527

J. P. Boeuf, Y. Lagmich, T. Unfer, T. Callegari, and L. C. Pitchford, Electrohydrodynamic force in dielectric barrier discharge plasma actuators, Journal of Physics D-Applied Physics, vol.40, pp.652-662, 2007.

A. Boileau, T. Gries, C. Noel, R. P. Cardoso, and T. Belmonte, Sub-micro a-C:H patterning of silicon surfaces assisted by atmospheric-pressure plasma-enhanced chemical vapor deposition, Journal of Physics D-Applied Physics, vol.49, p.445306, 2016.
URL : https://hal.archives-ouvertes.fr/hal-02113592

A. Botman, J. J. Mulders, and C. W. Hagen, Creating pure nanostructures from electron-beam-induced deposition using purification techniques: a technology perspective, Nanotechnology, vol.20, p.372001, 2009.

M. I. Boulos, The Role of Transport Phenomena and Modeling in the Development of Thermal Plasma Technology, Plasma Chem. Plasma Process, vol.36, pp.3-28, 2016.

T. Bret, I. Utke, C. Gaillard, and P. Hoffmann, Periodic structure formation by focused electron-beam-induced deposition, Journal of Vacuum Science & Technology B, vol.22, pp.2504-2510, 2004.

D. Chakravarty, C. S. Tiwary, C. F. Woellner, S. Radhakrishnan, S. Vinod et al., 3D Porous Graphene by Low-Temperature Plasma Welding for Bone Implants, vol.28, pp.8959-8967, 2016.

K. Cheng, M. H. Yang, W. W. Chiu, C. Y. Huang, J. Chang et al., Ink-jet printing, selfassembled polyelectrolytes, and electroless plating: Low cost fabrication of circuits on a flexible substrate at room temperature, Macromol. Rapid Commun, vol.26, pp.247-264, 2005.

J. W. Choi, E. Macdonald, and R. Wicker, Multi-material microstereolithography, Int J Adv Manuf Tech, vol.49, pp.543-551, 2010.

L. Chong, S. Ramakrishna, and S. Singh, A review of digital manufacturing-based hybrid additive manufacturing processes, Int J Adv Manuf Tech, vol.95, pp.2281-2300, 2018.

A. Clausen, F. W. Wang, J. S. Jensen, O. Sigmund, and J. A. Lewis, Topology Optimized Architectures with Programmable Poisson's Ratio over Large Deformations, Advanced Materials, vol.27, pp.5523-5527, 2015.

P. Cools, C. Mota, I. Lorenzo-moldero, R. Ghobeira, N. De et al., Acrylic Acid Plasma Coated 3D Scaffolds for Cartilage tissue engineering applications, Sci. Rep, vol.8, p.3830, 2018.

E. A. Corbin, L. J. Millet, J. H. Pikul, C. L. Johnson, J. G. Georgiadis et al., Micromechanical properties of hydrogels measured with MEMS resonant sensors, Biomed. Microdevices, vol.15, pp.311-319, 2013.

R. Agostino, P. Favia, C. Oehr, and M. R. Wertheimer, Low-temperature plasma processing of materials: Past, present, and future, Plasma Process Polym, vol.2, pp.7-15, 2005.

B. J. Gans, P. C. Duineveld, and U. S. Schubert, Inkjet printing of polymers: State of the art and future developments, Advanced Materials, vol.16, pp.203-213, 2004.

T. Debroy, H. L. Wei, J. S. Zuback, T. Mukherjee, J. W. Elmer et al., Additive manufacturing of metallic components -Process, structure and properties, Prog. Mater Sci, vol.92, pp.112-224, 2018.

A. Dey, S. Krishnamurthy, J. Bowen, D. Nordlund, M. Meyyappan et al., Plasma Jet Printing and in Situ Reduction of Highly Acidic Graphene Oxide, ACS Nano, vol.12, pp.5473-5481, 2018.

H. Exner, M. Horn, A. Streek, P. Regenfuss, F. Ullmann et al., Laser Micro Sintering -A new method to generate metal and ceramic parts of high resolution with sub-micrometer powder, Virtual and Physical Prototyping, vol.3, pp.3-11, 2008.

R. D. Farahani, M. Dube, and D. Therriault, Three-Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications, Advanced Materials, vol.28, pp.5794-5821, 2016.

S. Felton, M. Tolley, E. Demaine, D. Rus, and R. Wood, A method for building self-folding machines, Science, vol.345, pp.644-646, 2014.

S. R. Forrest, The path to ubiquitous and low-cost organic electronic appliances on plastic, Nature, vol.428, pp.911-918, 2004.

H. Forster, C. Wolfrum, and W. Peukert, Experimental study of metal nanoparticle synthesis by an arc evaporation/condensation process, J. Nanopart. Res, vol.14, p.926, 2012.

J. D. Fowlkes, R. Winkler, B. B. Lewis, M. G. Stanford, H. Plank et al., Simulation-Guided 3D Nanomanufacturing via Focused Electron Beam Induced Deposition, Acs Nano, vol.10, pp.6163-6172, 2016.

K. Fricke, H. Steffen, T. Woedtke, K. Schroder, and K. D. Weltmann, High Rate Etching of Polymers by Means of an Atmospheric Pressure Plasma Jet, vol.8, pp.51-58, 2011.

A. Frutiger, J. T. Muth, D. M. Vogt, Y. Menguc, A. Campo et al., Capacitive Soft Strain Sensors via Multicore-Shell Fiber Printing, Advanced Materials, vol.27, pp.2440-2446, 2015.

P. Galliker, J. Schneider, H. Eghlidi, S. Kress, V. Sandoghdar et al., Direct printing of nanostructures by electrostatic autofocussing of ink nanodroplets, Nat Commun, vol.3, p.890, 2012.

R. P. Gandhiraman, E. Singh, D. C. Diaz-cartagena, D. Nordlund, J. Koehne et al., Plasma jet printing for flexible substrates, Appl. Phys. Lett, vol.108, p.123103, 2016.

M. Gavagnin, H. D. Wanzenboeck, S. Wachter, M. M. Shawrav, A. Persson et al., Free-Standing Magnetic Nanopillars for 3D Nanomagnet Logic, Acs Appl Mater Inter, vol.6, pp.20254-20260, 2014.

H. C. George, T. A. Orlova, A. O. Orlov, and G. L. Snider, Novel method for fabrication of nanoscale singleelectron transistors: Electron beam induced deposition of Pt and atomic layer deposition of tunnel barriers, Journal of Vacuum Science & Technology B, vol.29, pp.6-7, 2011.

M. K. Ghatkesar, H. H. Garza, F. Heuck, and U. Staufer, Scanning Probe Microscope-Based Fluid Dispensing, vol.5, pp.954-1001, 2014.

S. L. Girshick, Aerosol processing for nanomanufacturing, J. Nanopart. Res, vol.10, pp.935-945, 2008.

A. S. Gladman, E. A. Matsumoto, R. G. Nuzzo, L. Mahadevan, and J. A. Lewis, Biomimetic 4D printing, vol.15, p.413, 2016.

N. Y. Gonzalez, M. E. Morsli, and P. Proulx, Production of Nanoparticles in Thermal Plasmas: A Model Including Evaporation, Nucleation, Condensation, and Fractal Aggregation, J. Therm. Spray Technol, vol.17, pp.533-550, 2008.

P. Grenson, O. Leon, P. Reulet, and B. Aupoix, Investigation of an impinging heated jet for a small nozzle-toplate distance and high Reynolds number: An extensive experimental approach, Int. J. Heat Mass Transfer, vol.102, pp.801-815, 2016.

D. J. Guo, R. Kometani, S. Warisawa, and S. Ishihara, Growth of ultra-long free-space-nanowire by the real-time feedback control of the scanning speed on focused-ion-beam chemical vapor deposition, Journal of Vacuum Science & Technology B, vol.31, p.61601, 2013.

J. Y. Guo, X. B. Fan, R. Dolbec, S. W. Xue, J. Jurewicz et al., Development of Nanopowder Synthesis Using Induction Plasma, vol.12, pp.188-199, 2010.

J. Hafiz, R. Mukherjee, X. Wang, J. V. Heberlein, P. H. Mcmurry et al., Analysis of nanostructured coatings synthesized by ballistic impaction of nanoparticles, Thin Solid Films, vol.515, pp.1147-1151, 2006.

J. Hafiz, R. Mukherjee, X. Wang, P. H. Mcmurry, J. V. Heberlein et al., Hypersonic plasma particle deposition -A hybrid between plasma spraying and vapor deposition, J. Therm. Spray Technol, vol.15, pp.822-826, 2006.

J. Hafiz, X. Wang, R. Mukherjee, W. Mook, C. R. Perrey et al., Hypersonic plasma particle deposition of Si-Ti-N nanostructured coatings, vol.188, pp.364-370, 2004.

H. Hartl, Y. R. Guo, K. Ostrikov, Y. B. Xian, J. Zheng et al., Film formation from plasma-enabled surface-catalyzed dehalogenative coupling of a small organic molecule, Rsc Adv, vol.9, pp.2848-2856, 2019.

D. Herzog, V. Seyda, E. Wycisk, and C. Emmelmann, Additive manufacturing of metals, Acta Mater, vol.117, pp.371-392, 2016.

L. Hirt, A. Reiser, R. Spolenak, and T. Zambelli, Additive Manufacturing of Metal Structures at the Micrometer Scale, Advanced Materials, vol.29, p.1604211, 2017.

A. Hollander and L. Abhinandan, Localized deposition by mu-jet-CVD, Surf Coat Tech, vol.174, pp.1175-1177, 2003.

S. Hong, E. Yick, A. Chow, J. Murdock, D. H. Fang et al., Direct plasma printing of nano-gold from an inorganic precursor, J Mater Chem C, vol.7, p.6369, 2019.

J. L. Hu, H. P. Meng, G. Q. Li, and S. I. Ibekwe, A review of stimuli-responsive polymers for smart textile applications, Smart Mater. Struct, vol.21, p.53001, 2012.

K. I. Hunter, J. T. Held, K. A. Mkhoyan, and U. R. Kortshagen, Nonthermal Plasma Synthesis of Core/Shell Quantum Dots: Strained Ge/Si Nanocrystals, Acs Appl Mater Inter, vol.9, pp.8263-8270, 2017.

, Innophysics

J. Jager, A. Schmidt, S. Pfuch, O. Spange, N. Beier et al., Antibacterial Silicon Oxide Thin Films Doped with Zinc and Copper Grown by Atmospheric Pressure Plasma Chemical Vapor Deposition, Nanomaterials-Basel, vol.9, p.255, 2019.

P. I. John, Plasma Sciences and the Creation of Wealth (Tata McGraw Hill Education, 2005.

K. S. Joshy, S. Snigdha, and S. Thomas, Plasma Modified Polymeric Materials for Scaffolding of Bone Tissue Engineering, 2019.

K. S. Kim and T. H. Kim, Nanofabrication by thermal plasma jets: From nanoparticles to low-dimensional nanomaterials, J. Appl. Phys, vol.125, p.70901, 2019.

D. B. Kolesky, R. L. Truby, A. S. Gladman, T. A. Busbee, K. A. Homan et al., 3D Bioprinting of Vascularized, Heterogeneous Cell-Laden Tissue Constructs, vol.26, pp.3124-3130, 2014.

H. W. Koops, O. E. Hoinkis, M. E. Honsberg, R. Schmidt, R. Blum et al., Two-dimensional photonic crystals produced by additive nanolithography with electron beaminduced deposition act as filters in the infrared, Microelectron. Eng, vol.57, issue.8, pp.995-1001, 2001.

U. Kortshagen and U. Bhandarkar, Modeling of particulate coagulation in low pressure plasmas, Phys Rev E, vol.60, pp.887-898, 1999.

U. R. Kortshagen, R. M. Sankaran, R. N. Pereira, S. L. Girshick, J. J. Wu et al., Nonthermal Plasma Synthesis of Nanocrystals: Fundamental Principles, Materials, and Applications, vol.116, pp.11061-11127, 2016.

K. Kotz, W. Arnold, D. Bauer, N. Schild, K. Keller et al., Three-dimensional printing of transparent fused silica glass, Nature, vol.544, p.337, 2017.

N. J. Kramer, R. J. Anthony, M. Mamunuru, E. S. Aydil, and U. R. Kortshagen, Plasma-induced crystallization of silicon nanoparticles, Journal of Physics D-Applied Physics, vol.47, p.75202, 2014.

N. J. Kramer, E. S. Aydil, and U. R. Kortshagen, Requirements for plasma synthesis of nanocrystals at atmospheric pressures, Journal of Physics D-Applied Physics, vol.48, p.35205, 2015.

A. Kumar, S. Kang, C. Larriba-andaluz, H. Ouyang, C. J. Hogan et al., Ligand-free Ni nanocluster formation at atmospheric pressure via rapid quenching in a microplasma process, Nanotechnology, vol.25, 2014.

Y. Kyung, C. Lee, J. Kim, G. Lee, and . Yeom, Deposition of carbon nanotubes by capillary-type atmospheric pressure PECVD, Thin Solid Films, vol.506, pp.268-273, 2006.

A. Lazea-stoyanova, A. Vlad, A. M. Vlaicu, V. S. Teodorescu, and G. Dinescu, Synthesis of Copper Particles by Non-thermal Atmospheric Pressure Plasma Jet, vol.12, pp.705-709, 2015.

H. H. Lee, K. S. Chou, and K. C. Huang, Inkjet printing of nanosized silver colloids, Nanotechnology, vol.16, pp.2436-2441, 2005.

S. W. Lee, D. Liang, X. P. Gao, and R. M. Sankaran, Direct Writing of Metal Nanoparticles by Localized Plasma Electrochemical Reduction of Metal Cations in Polymer Films, Adv. Funct. Mater, vol.21, pp.2155-2161, 2011.

B. B. Lewis, M. G. Stanford, J. D. Fowlkes, K. Lester, H. Plank et al., Electron-stimulated purification of platinum nanostructures grown via focused electron beam induced deposition, Beilstein J Nanotech, vol.6, pp.907-918, 2015.

J. A. Lewis, Direct ink writing of 3D functional materials, Adv. Funct. Mater, vol.16, pp.2193-2204, 2006.

M. M. Ling and Z. N. Bao, Thin film deposition, patterning, and printing in organic thin film transistors, Chem. Mater, vol.16, pp.4824-4840, 2004.

J. K. Liu, J. Boyles, M. D. Genzer, and . Dickey, Self-folding of polymer sheets using local light absorption, Soft Matter, vol.8, pp.1764-1769, 2012.

M. F. Mabrook, C. Pearson, A. S. Jombert, D. A. Zeze, and M. C. Petty, The morphology, electrical conductivity and vapour sensing ability of inkjet-printed thin films of single-wall carbon nanotubes, Carbon, vol.47, pp.752-757, 2009.

K. Mackie and M. Gordon, Microplasma-based deposition of functional nanomaterials for energy storage applications, Abstracts of Papers of The, vol.253, 2017.

K. E. Mackie, A. C. Pebley, M. M. Butala, J. P. Zhang, G. D. Stucky et al., Microplasmas for direct, substrate-independent deposition of nanostructured metal oxides, Appl. Phys. Lett, vol.109, p.33110, 2016.

S. Magdassi, A. Bassa, Y. Vinetsky, and A. Kamyshny, Silver nanoparticles as pigments for water-based ink-jet inks, Chem. Mater, vol.15, pp.2208-2217, 2003.

D. Maguire, M. Rutherford, C. Macias-montero, C. Mahony, M. Kelsey et al., Continuous In-Flight Synthesis for On-Demand Delivery of Ligand-Free Colloidal Gold Nanoparticles, vol.17, pp.1336-1343, 2017.

M. Mahamood, Laser Metal Deposition Process of Metals, Alloys, and Composite Materials, 2018.

A. Mameli, Y. H. Kuang, M. Aghaee, C. K. Ande, B. Karasulu et al., Area-Selective Atomic Layer Deposition of In2O3:H Using a ?-Plasma Printer for Local Area Activation, Chem. Mater, vol.29, pp.921-925, 2017.

L. Mangolini and U. Kortshagen, Plasma-assisted synthesis of silicon nanocrystal inks, Advanced Materials, vol.19, pp.2513-2519, 2007.

L. Mangolini, E. Thimsen, and U. Kortshagen, High-yield plasma synthesis of luminescent silicon nanocrystals, Nano Lett, vol.5, pp.655-659, 2005.

Y. Q. Mao, K. Yu, M. S. Isakov, J. T. Wu, M. L. Dunn et al., Sequential Self-Folding Structures by 3D Printed Digital Shape Memory Polymers, Sci. Rep, vol.5, p.13616, 2015.

T. Matsoukas and M. Russell, Particle Charging in Low-Pressure Plasmas, J. Appl. Phys, vol.77, pp.4285-4292, 1995.

R. Maurau, N. D. Boscher, S. Olivier, S. Bulou, T. Belmonte et al., Atmospheric pressure, low temperature deposition of photocatalytic TiOx thin films with a blown arc discharge, Surf Coat Tech, vol.232, pp.159-165, 2013.

I. Michelakaki, N. Boukos, D. A. Dragatogiannis, S. Stathopoulos, C. A. Charitidis et al., Synthesis of hafnium nanoparticles and hafnium nanoparticle films by gas condensation and energetic deposition, Beilstein J Nanotech, vol.9, pp.1868-1880, 2018.

S. Y. Min, T. S. Kim, B. J. Kim, H. Cho, Y. Y. Noh et al., Large-scale organic nanowire lithography and electronics, Nat Commun, vol.4, p.1773, 2013.

S. Mohr and O. Khan, 3D Printing and Its Disruptive Impacts on Supply Chains of the Future, pp.20-25, 2015.

I. Motrescu and M. Nagatsu, Nanocapillary Atmospheric Pressure Plasma Jet: A Tool for Ultrafine Maskless Surface Modification at Atmospheric Pressure, vol.8, pp.12528-12533, 2016.

K. Murakami and M. Takai, Nano electron source fabricated by beam-induced deposition and its unique feature, Microelectron. Eng, vol.132, pp.74-82, 2015.

L. E. Murr, S. M. Gaytan, D. A. Ramirez, E. Martinez, J. Hernandez et al., Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies, Journal of Materials Science & Technology, vol.28, pp.1-14, 2012.

T. J. Ober, D. Foresti, and J. A. Lewis, Active mixing of complex fluids at the microscale, Proc. Natl. Acad. Sci. U.S.A, vol.112, pp.12293-12298, 2015.

S. Ohno and M. Uda, Preparation for Ultrafine Particles of Fe-Ni, Fe-Cu and Fe-Si Alloys by Hydrogen Plasma-Metal Reaction, J. Jpn. Inst. Met, vol.53, pp.946-952, 1989.

R. Parashkov, E. Becker, T. Riedl, H. H. Johannes, and W. Kowalsky, Large area electronics using printing, methods, Proceedings of the Ieee, vol.93, pp.1321-1329, 2005.

J. Park, M. Hardy, S. J. Kang, K. Barton, K. Adair et al., High-resolution electrohydrodynamic jet printing, Nat Mater, vol.6, p.782, 2007.

S. Park, U. Cvelbar, W. Choe, and S. Y. Moon, The creation of electric wind due to the electrohydrodynamic force, Nat Commun, vol.9, p.371, 2018.

J. Perelaer, R. Jani, M. Grouchko, A. Kamyshny, S. Magdassi et al., Plasma and Microwave Flash Sintering of a Tailored Silver Nanoparticle Ink, Yielding 60% Bulk Conductivity on Cost-Effective Polymer Foils, vol.24, pp.3993-3998, 2012.

H. Plank, C. Gspan, M. Dienstleder, G. Kothleitner, and F. Hofer, The influence of beam defocus on volume growth rates for electron beam induced platinum deposition, Nanotechnology, vol.19, p.485302, 2008.

, Relyon Plasma

P. D. Rack, J. D. Fowlkes, and S. J. Randolph, In situ probing of the growth and morphology in electron-beaminduced deposited nanostructures, Nanotechnology, vol.18, p.465602, 2007.

C. L. Randall, E. Gultepe, and D. H. Gracias, Self-folding devices and materials for biomedical applications, Trends Biotechnol, vol.30, pp.138-146, 2012.

C. Richmonds and R. M. Sankaran, Plasma-liquid electrochemistry: Rapid synthesis of colloidal metal nanoparticles by microplasma reduction of aqueous cations, Appl. Phys. Lett, vol.93, p.131501, 2008.

C. Richmonds, M. Witzke, B. Bartling, S. W. Lee, J. Wainright et al., Electron-Transfer Reactions at the Plasma-Liquid Interface, J. Am. Chem. Soc, vol.133, pp.17582-17585, 2011.

P. Richner, S. J. Kress, D. J. Norris, and D. Poulikakos, Charge effects and nanoparticle pattern formation in electrohydrodynamic NanoDrip printing of colloids, Nanoscale, vol.8, pp.6028-6034, 2016.

S. Sanaur, A. Whalley, B. Alameddine, M. Carnes, and C. Nuckolls, Jet-printed electrodes and semiconducting oligomers for elaboration of organic thin-film transistors, Org. Electron, vol.7, pp.423-427, 2006.
URL : https://hal.archives-ouvertes.fr/emse-00469848

V. Satulu, M. D. Ionita, S. Vizireanu, B. Mitu, and G. Dinescu, Plasma Processing with Fluorine Chemistry for Modification of Surfaces Wettability, Molecules, vol.21, p.1711, 2016.

J. Schneider, P. Rohner, D. Thureja, M. Schmid, P. Galliker et al., Electrohydrodynamic NanoDrip Printing of High Aspect Ratio Metal Grid Transparent Electrodes, Adv. Funct. Mater, vol.26, pp.833-840, 2016.

M. Schwentenwein and J. Homa, Additive Manufacturing of Dense Alumina Ceramics, Int J Appl Ceram Tec, vol.12, pp.1-7, 2015.

C. W. Sele, T. Werne, R. H. Friend, and H. Sirringhaus, Lithography-free, self-aligned inkjet printing with sub-hundred-nanometer resolution, Advanced Materials, vol.17, pp.997-1001, 2005.

J. H. Seo and B. G. Hong, Thermal Plasma Synthesis of Nano-Sized Powders, Nucl Eng Technol, vol.44, pp.9-20, 2012.

K. Seol, D. Kim, S. Lee, J. H. Kim, W. S. Chang et al., Electrodeposition-based 3D Printing of Metallic Microarchitectures with Controlled Internal Structures, Small, vol.11, pp.3896-3902, 2015.

M. Shigeta and A. B. Murphy, Thermal plasmas for nanofabrication, Journal of Physics D-Applied Physics, vol.44, p.174025, 2011.

Y. Shimizu, Diameter control of gold nanoparticles synthesized in gas phase using atmospheric-pressure H2/Ar plasma jet and gold wire as the nanoparticle source: Control by varying the H2/Ar mixture ratio, AIP Adv, vol.7, p.15316, 2017.

K. Shimizu, T. Kawaguchi, N. Sasaki, and . Koshizaki, Generation of room-temperature atmospheric H2/Ar microplasma jet driven with pulse-modulated ultrahigh frequency and its application to gold nanoparticle preparation, Appl. Phys. Lett, vol.94, p.191504, 2009.

Y. Shimizu, T. Sasaki, T. Ito, K. Terashima, and N. Koshizaki, Fabrication of spherical carbon via UHF inductively coupled microplasma CVD, Journal of Physics D-Applied Physics, vol.36, pp.2940-2944, 2003.

K. Silmy, A. Hollander, A. Dillmann, and J. Thomel, Micro-jet plasma CVD with HMDSO/O2, Surf Coat Tech, pp.368-371, 2005.

H. Sirringhaus, T. Kawase, R. H. Friend, T. Shimoda, M. Inbasekaran et al., High-resolution inkjet printing of all-polymer transistor circuits, Science, vol.290, pp.2123-2126, 2000.

M. A. Skylar-scott, S. Gunasekaran, and J. A. Lewis, Laser-assisted direct ink writing of planar and 3D metal architectures, Proc. Natl. Acad. Sci. U.S.A, vol.113, pp.6137-6142, 2016.

M. G. Stanford, B. B. Lewis, J. H. Noh, J. D. Fowlkes, and P. D. Rack, Inert Gas Enhanced Laser-Assisted Purification of Platinum Electron-Beam-Induced Deposits, Acs Appl Mater Inter, vol.7, pp.19579-19588, 2015.

A. R. Studart, Additive manufacturing of biologically-inspired materials, Chem. Soc. Rev, vol.45, pp.359-376, 2016.

N. Stutzmann, R. H. Friend, and H. Sirringhaus, Self-aligned, vertical-channel, polymer field-effect transistors, Science, vol.299, pp.1881-1884, 2003.

Y. Sui, C. C. Dai, R. M. Liu, C. A. Sankaran, and . Zormansui, A New Class of Low-Temperature Plasma-Activated, Inorganic Salt-Based Particle-Free Inks for Inkjet Printing Metals, 2019.

J. B. Szczech, C. M. Megaridis, D. R. Gamota, and J. Zhang, Fine-line conductor manufacturing using drop-ondemand PZT printing technology, Ieee T Electron Pack, vol.25, pp.26-33, 2002.

T. Takai, H. Nakao, and F. Iwata, Three-dimensional microfabrication using local electrophoresis deposition and a laser trapping technique, Opt. Express, vol.22, pp.28109-28117, 2014.

V. Tasco, M. Esposito, F. Todisco, A. Benedetti, M. Cuscuna et al., Three-dimensional nanohelices for chiral photonics, EMPA Materials Science and Technology, vol.122, p.280, 2016.

M. Thomas, J. Borris, A. Dohse, M. Eichler, A. Hinze et al., Plasma Printing and Related Techniques -Patterning of Surfaces Using Microplasmas at Atmospheric Pressure, Plasma Process Polym, vol.9, pp.1086-1103, 2012.

M. Thomson, J. L. Hodgkinson, and D. W. Sheel, Control of zinc oxide surface structure using combined atmospheric pressure-based CVD growth and plasma etching, Surf Coat Tech, vol.230, pp.190-195, 2013.

S. Tibbits, 4d Printing: Multi-Material Shape Change, vol.84, pp.116-121, 2014.

R. L. Truby and J. A. Lewis, Printing soft matter in three dimensions, Nature, vol.540, pp.371-378, 2016.

F. Ullmann and J. Bielecki, Synthesis in the Biphenyl series. (I. Announcement), Ber Dtsch Chem Ges, vol.34, pp.2174-2185, 1901.

M. Vaezi, H. Seitz, and S. F. Yang, A review on 3D micro-additive manufacturing technologies, Int J Adv Manuf Tech, vol.67, pp.1721-1754, 2013.

R. Van-hout, V. Rinsky, and Y. G. Grobman, Experimental study of a round jet impinging on a flat surface: Flow field and vortex characteristics in the wall jet, Int. J. Heat Fluid Flow, vol.70, pp.41-58, 2018.

P. Verhoeven, A. Stevens, J. P. Schalken, M. Soltani, and A. Mäntysalo, Digital Printing with Micro Plasmas and its Effects on Surface Wettability, 28th International-Conference on Surface Modification Technologies, Tampre, pp.421-431, 2014.

R. O. Verkuijlen, M. H. Van-dongen, A. A. Stevens, J. Van-geldrop, and J. P. Bernards, Surface modification of polycarbonate and polyethylene naphtalate foils by UV-ozone treatment and mu Plasma printing, Appl. Surf. Sci, vol.290, pp.381-387, 2014.

A. Vyatskikh, S. Delalande, A. Kudo, X. Zhang, C. M. Portela et al., Additive manufacturing of 3D nano-architected metals, Nat Commun, vol.9, p.593, 2018.

D. Z. Wang, W. Zha, L. Feng, Q. Ma, X. M. Liu et al., Electrohydrodynamic jet printing and a preliminary electrochemistry test of graphene micro-scale electrodes, J Micromech Microeng, vol.26, p.45010, 2016.

J. Z. Wang, J. Gu, F. Zenhausem, and H. Sirringhaus, Low-cost fabrication of submicron all polymer field effect transistors, Appl. Phys. Lett, vol.88, 2006.

M. Wang, P. Favi, X. Q. Cheng, N. H. Golshan, K. S. Ziemer et al., Cold atmospheric plasma (CAP) surface nanomodified 3D printed polylactic acid (PLA) scaffolds for bone regeneration, Acta Biomater, vol.46, pp.256-265, 2016.

X. L. Wang, A. Gidwani, S. L. Girshick, and P. H. Mcmurry, Aerodynamic focusing of nanoparticles: II. Numerical simulation of particle motion through aerodynamic lenses, Aerosol Sci. Technol, vol.39, pp.624-636, 2005.

X. L. Wang, F. E. Kruis, and P. H. Mcmurry, Aerodynamic focusing of nanoparticles: I. Guidelines for designing aerodynamic lenses for nanoparticles, Aerosol Sci. Technol, vol.39, pp.611-623, 2005.

T. Wei, J. Ruan, Z. J. Fan, G. H. Luo, and F. Wei, Preparation of a carbon nanotube film by ink-jet printing, Carbon, vol.45, pp.2712-2716, 2007.

K. D. Weltmann, J. F. Kolb, M. Holub, D. Uhrlandt, M. Simek et al., The future for plasma science and technology, vol.16, p.133502, 2019.

J. Wienand, A. Riedelsheimer, and B. Weigand, Numerical study of a turbulent impinging jet for different jet-toplate distances using two-equation turbulence models, Eur J Mech B-Fluid, vol.61, pp.210-217, 2017.

J. Xu, C. Zhong, C. Fu, and . News, Novel method for printing high-quality metal wires, 2017.

Y. G. Yao, Z. N. Huang, P. F. Xie, S. D. Lacey, R. J. Jacob et al., Carbothermal shock synthesis of high-entropy-alloy nanoparticles, vol.359, pp.1489-1494, 2018.

S. Yick, Z. J. Han, and K. Ostrikov, Atmospheric microplasma-functionalized 3D microfluidic strips within dense carbon nanotube arrays confine Au nanodots for SERS sensing, Chem. Commun, vol.49, pp.2861-2863, 2013.

Z. Yin, Y. Huang, Y. Duan, and H. Zhang, Electrohydrodynamic direct-writing for flexible electronic manufacturing, 2018.

M. Young and E. Pfender, Generation and Behavior of Fine Particles in Thermal Plasmas -a Review, vol.5, pp.1-37, 1985.

I. Zein, D. W. Hutmacher, K. C. Tan, and S. H. Teoh, Fused deposition modeling of novel scaffold architectures for tissue engineering applications, Biomaterials, vol.23, pp.1169-1185, 2002.

R. Zimmermann, A. Pfuch, K. Horn, J. Weisser, A. Heft et al., An Approach to Create Silver Containing Antibacterial Coatings by Use of Atmospheric Pressure Plasma Chemical Vapour Deposition (APCVD) and Combustion Chemical Vapour Deposition (CCVD) in an Economic Way, Plasma Process Polym, vol.8, pp.295-304, 2011.