A. Khalil, H. Chong, E. Owolabi, F. Asniza, M. Tye et al., Enhancement of basic properties of polysaccharide-based composites with organic and inorganic fillers: a review, J. Appl. Polym. Sci, vol.136, p.47251, 2019.

T. Abitbol, D. Kam, Y. Levi-kalisman, D. G. Gray, and O. Shoseyov, Surface charge influence on the phase separation and viscosity of cellulose nanocrystals, Langmuir, vol.34, pp.3925-3933, 2018.

T. Abitbol, A. Rivkin, Y. Cao, Y. Nevo, E. Abraham et al., Nanocellulose, a tiny fiber with huge applications, Curr. Opin. Biotechnol, vol.39, pp.76-88, 2016.

R. E. Abouzeid, R. Khiari, N. El-wakil, and A. Dufresne, Current state and new trends in the use of cellulose nanomaterials for wastewater treatment, Biomacromolecules, vol.20, pp.573-597, 2018.

S. Afrin, K. , and Z. , Isolation and surface modification of nanocellulose: necessity of enzymes over chemicals, Chem. Biol. Eng. Rev, vol.4, pp.289-303, 2017.

S. Agate, M. Joyce, L. Lucia, and L. Pal, Cellulose and nanocellulosebased flexible-hybrid printed electronics and conductive composites-a review, Carbohyd. Polym, vol.198, pp.249-260, 2018.

V. B. Agbor, N. Cicek, R. Sparling, A. Berlin, and D. B. Levin, Biomass pretreatment: fundamentals toward application, Biotechnol. Adv, vol.29, pp.675-685, 2011.

M. A. Akhlaghi, R. Bagherpour, and H. Kalhori, Application of bacterial nanocellulose fibers as reinforcement in cement composites, Constr. Build. Mater, p.118061, 2020.

M. Alavi, Modifications of microcrystalline cellulose (MCC), nanofibrillated cellulose (NFC), and nanocrystalline cellulose (NCC) for antimicrobial and wound healing applications, E Polymers, vol.19, pp.103-119, 2019.

A. P. Almeida, J. P. Canejo, S. N. Fernandes, C. Echeverria, P. L. Almeida et al., Cellulose-based biomimetics and their applications, Adv. Mater, vol.30, p.1703655, 2018.

S. R. Anderson, D. Esposito, W. Gillette, J. Zhu, U. Baxa et al., Enzymatic preparation of nanocrystalline and microcrystalline cellulose, TAPPI J, vol.13, pp.35-41, 2014.

A. Arof, N. M. Nor, N. Aziz, M. Kufian, A. Abdulaziz et al., Investigation on morphology of composite poly (ethylene oxide)-cellulose nanofibers, Mater. Today Proc, vol.17, pp.388-393, 2019.

F. Awan, E. Bulger, R. M. Berry, and K. C. Tam, Enhanced radical scavenging activity of polyhydroxylated C 60 functionalized cellulose nanocrystals, Cellulose, vol.23, pp.3589-3599, 2016.

N. Ayrilmis, J. H. Kwon, S. H. Lee, T. H. Han, and C. W. Park, Microfibrillated-cellulose-modified urea-formaldehyde adhesives with different F/U molar ratios for wood-based composites, J. Adhes. Sci. Technol, vol.30, pp.2032-2043, 2016.

N. Ayrilmis, F. Ozdemir, O. B. Nazarenko, and P. Visakh, Mechanical and thermal properties of Moringa oleifera cellulose-based epoxy nanocomposites, J. Compos. Mater, vol.53, pp.669-675, 2019.

L. Bacakova, J. Pajorova, M. Bacakova, A. Skogberg, P. Kallio et al., Versatile application of nanocellulose: from industry to skin tissue engineering and wound healing, Nanomaterials, vol.9, p.164, 2019.

L. Bacakova, J. Pajorova, M. Tomkova, R. Matejka, A. Broz et al., Applications of nanocellulose/nanocarbon composites: focus on biotechnology and medicine, Nanomaterials, vol.10, p.196, 2020.

L. Bai, S. Lv, W. Xiang, S. Huan, D. J. Mcclements et al., Oil-in-water Pickering emulsions via microfluidization with cellulose nanocrystals: 2. In vitro lipid digestion, Food Hydrocol, vol.96, pp.709-716, 2019.

L. Bai, W. Xiang, S. Huan, and O. J. Rojas, Formulation and stabilization of concentrated edible oil-in-water emulsions based on electrostatic complexes of a food-grade cationic surfactant (ethyl lauroyl arginate) and cellulose nanocrystals, Biomacromolecules, vol.19, pp.1674-1685, 2018.

A. Balea, M. C. Monte, N. Merayo, C. Campano, C. Negro et al., Industrial Application of nanocelluloses in papermaking: a review of challenges, technical solutions, and market perspectives, Molecules, vol.25, p.526, 2020.

V. A. Barbash, O. V. Yaschenko, and O. M. Shniruk, Preparation and properties of nanocellulose from organosolv straw pulp, Nanoscale Res. Lett, vol.12, p.241, 2017.

V. A. Barbash and O. V. Yashchenko, Preparation and application of nanocellulose from non-wood plants to improve the quality of paper and cardboard, Appl. Nanosci, 2020.

S. Behera, R. Arora, N. Nandhagopal, and S. Kumar, Importance of chemical pretreatment for bioconversion of lignocellulosic biomass, Renew. Sustain. Energy Rev, vol.36, pp.91-106, 2014.

P. Bertsch and P. Fischer, Adsorption and interfacial structure of nanocelluloses at fluid interfaces, Adv. Colloid Interface Sci, vol.35, pp.571-588, 2019.

D. Beyene, M. Chae, J. Dai, C. Danumah, F. Tosto et al., Characterization of cellulase-treated fibers and resulting cellulose nanocrystals generated through acid hydrolysis, Materials, vol.11, p.1272, 2018.

A. W. Bhutto, K. Qureshi, K. Harijan, R. Abro, T. Abbas et al., Insight into progress in pre-treatment of lignocellulosic biomass, Energy, vol.122, pp.724-745, 2017.

N. Bielejewska and R. Hertmanowski, Functionalization of LC molecular films with nanocrystalline cellulose: a study of the self-assembly processes and molecular stability, Colloids Surf. B Biointerfaces, vol.187, p.110634, 2020.

L. Brinchi, F. Cotana, E. Fortunati, K. , and J. , Production of nanocrystalline cellulose from lignocellulosic biomass: technology and applications, Carbohyd. Polym, vol.94, pp.154-169, 2013.

C. Espinosa, S. Kuhnt, T. Foster, E. J. Weder, and C. , Isolation of thermally stable cellulose nanocrystals by phosphoric acid hydrolysis, Biomacromolecules, vol.14, pp.1223-1230, 2013.

C. Campano, A. Balea, A. Blanco, and C. Negro, Enhancement of the fermentation process and properties of bacterial cellulose: a review, Cellulose, vol.23, pp.57-91, 2016.

L. Cao, J. Huang, C. , and Y. , Dual cross-linked epoxidized natural rubber reinforced by tunicate cellulose nanocrystals with improved strength and extensibility, ACS Sustain. Chem. Eng, vol.6, pp.14802-14811, 2018.

S. L. Cao, Y. M. Huang, X. H. Li, P. Xu, H. Wu et al., Preparation and characterization of immobilized lipase from Pseudomonas cepacia onto magnetic cellulose nanocrystals, Sci. Rep, vol.6, p.20420, 2016.

I. Capron, Application of nanocellulose as pickering emulsifier, Nanocellulose and sustainability: production, properties, applications, and case studies, pp.175-196, 2018.

T. Carvalho, G. Guedes, F. L. Sousa, C. S. Freire, and H. A. Santos, Latest advances on bacterial cellulose-based materials for wound healing, delivery systems, and tissue engineering, Biotechnol. J, vol.14, p.1900059, 2019.

H. Charreau, E. Cavallo, and M. L. Foresti, Patents involving nanocellulose: analysis of their evolution since 2010, Carbohyd. Polym, vol.237, p.116039, 2020.

H. L. Charreau, M. Foresti, and A. Vazquez, Nanocellulose patents trends: a comprehensive review on patents on cellulose nanocrystals, microfibrillated and bacterial cellulose, Recent Pat. Nanotechnol, vol.7, pp.56-80, 2013.

L. Chávez-guerrero, S. Sepúlveda-guzmán, J. Silva-mendoza, C. Aguilar-flores, and O. Pérez-camacho, Eco-friendly isolation of cellulose nanoplatelets through oxidation under mild conditions, Carbohyd. Polym, vol.181, pp.642-649, 2018.

H. Chen, J. Liu, X. Chang, D. Chen, Y. Xue et al., A review on the pretreatment of lignocellulose for high-value chemicals, Fuel Process. Technol, vol.160, pp.196-206, 2017.

W. Chen, H. Yu, S. Y. Lee, T. Wei, J. Li et al., Nanocellulose: a promising nanomaterial for advanced electrochemical energy storage, Chem. Soc. Rev, vol.47, pp.2837-2872, 2018.

Y. Chen, L. Gan, J. Huang, and A. Dufresne, Reinforcing mechanism of cellulose nanocrystals in nanocomposites, Nanocellulose: From Fundamentals to Advanced Materials, pp.201-249, 2019.

H. Cheng, K. Kilgore, C. Ford, C. Fortier, M. K. Dowd et al., Cottonseed protein-based wood adhesive reinforced with nanocellulose, J. Adhes. Sci. Technol, vol.33, pp.1357-1368, 2019.

M. Cheng, Z. Qin, J. Hu, Q. Liu, T. Wei et al., Facile and rapid one-step extraction of carboxylated cellulose nanocrystals by H2SO4/HNO3 mixed acid hydrolysis, Carbohyd. Polym, vol.231, p.115701, 2020.

A. Clarke, A. A. Vasileiou, and M. Kontopoulou, Crystalline nanocellulose/thermoplastic polyester composites prepared by in situ polymerization, Polym. Eng. Sci, vol.59, pp.989-995, 2019.

C. C. Coelho, M. Michelin, M. A. Cerqueira, C. Gonçalves, R. V. Tonon et al., Cellulose nanocrystals from grape pomace: production, properties and cytotoxicity assessment, Carbohyd. Polym, vol.192, pp.327-336, 2018.

L. Dai, Y. Wang, X. Zou, Z. Chen, H. Liu et al., Ultrasensitive physical, bio, and chemical sensors derived from 1, 2, and 3-D nanocellulosic materials, Small, vol.16, p.1906567, 2020.

J. B. Daud and K. Y. Lee, Surface modification of nanocellulose, Handbook of Nanocellulose and Cellulose Nanocomposites, pp.101-122, 2017.

R. G. De-almeida-mesquita, L. M. Mendes, A. R. Sanadi, A. R. De-sena-neto, P. I. Claro et al., Urea formaldehyde and cellulose nanocrystals adhesive: studies applied to sugarcane bagasse particleboards, J. Polym. Environ, vol.26, pp.3040-3050, 2018.

N. K. Dehkordi, M. Minaiyan, A. Talebi, V. Akbari, and A. Taheri, Nanocrystalline cellulose-hyaluronic acid composite enriched with GM-CSF loaded chitosan nanoparticles for enhanced wound healing, Biomed. Mater, vol.14, p.35003, 2019.

M. Halluin, J. Rull-barrull, G. Bretel, C. Labrugère, E. Le-grognec et al., Chemically modified cellulose filter paper for heavy metal remediation in water, ACS Sustain. Chem. Eng, vol.5, pp.1965-1973, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02141310

M. Dominic, R. Joseph, P. S. Begum, B. P. Kanoth, J. Chandra et al., Green tire technology: effect of rice husk derived nanocellulose (RHNC) in replacing carbon black (CB) in natural rubber (NR) compounding, Carbohyd. Polym, vol.230, p.115620, 2020.

H. Du, C. Liu, X. Mu, W. Gong, D. Lv et al., Preparation and characterization of thermally stable cellulose nanocrystals via a sustainable approach of FeCl3-catalyzed formic acid hydrolysis, Cellulose, vol.23, pp.2389-2407, 2016.

H. Du, W. Liu, M. Zhang, C. Si, X. Zhang et al., Cellulose nanocrystals and cellulose nanofibrils based hydrogels for biomedical applications, Carbohyd. Polym, vol.209, pp.130-144, 2019.

W. Du, J. Guo, H. Li, and Y. Gao, Heterogeneously modified cellulose nanocrystals-stabilized pickering emulsion: preparation and their template application for the creation of PS microspheres with amino-rich surfaces, ACS Sustain. Chem. Eng, vol.5, pp.7514-7523, 2017.

X. Du, Z. Zhang, W. Liu, and Y. Deng, Nanocellulose-based conductive materials and their emerging applications in energy devices-a review, Nano Energy, vol.35, pp.299-320, 2017.

A. Dufresne, Nanocellulose: From Nature to High Performance Tailored Materials, 2013.

A. Dufresne, Cellulose nanomaterial reinforced polymer nanocomposites, Curr. Opin. Colloid Interface Sci, vol.29, pp.1-8, 2017.

A. Dufresne, Cellulose nanomaterials as green nanoreinforcements for polymer nanocomposites, Philos. Trans. R. Soc, vol.376, 2018.

A. Dufresne, Nanocellulose processing properties and potential applications, Curr. For. Rep, vol.5, pp.76-89, 2019.

A. Dufresne and M. N. Belgacem, Cellulose-reinforced composites: from micro-to nanoscale, Polímeros, vol.23, pp.277-286, 2013.

M. Dunky, Urea-formaldehyde (UF) adhesive resins for wood, Int. J. Adhes. Adhes, vol.18, pp.95-107, 1998.

A. Errokh, A. Magnin, J. L. Putaux, and S. Boufi, Morphology of the nanocellulose produced by periodate oxidation and reductive treatment of cellulose fibers, Cellulose, vol.25, pp.3899-3911, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02106176

F. V. Ferreira, M. Mariano, S. C. Rabelo, R. F. Gouveia, L. et al., Isolation and surface modification of cellulose nanocrystals from sugarcane bagasse waste: from a micro-to a nano-scale view, Appl. Surf. Sci, vol.436, pp.1113-1122, 2018.

B. G. Fiss, L. Hatherly, R. S. Stein, T. Frissi?, and A. Moores, Mechanochemical phosphorylation of polymers and synthesis of flameretardant cellulose nanocrystals, ACS Sustain. Chem. Eng, vol.7, pp.7951-7959, 2019.

M. Fodil-cherif, D. Trache, N. Brosse, F. Benaliouche, and A. F. Tarchoun, Comparison of the physicochemical properties and thermal stability of organosolv and kraft lignins from hardwood and softwood biomass for their potential valorization, Wast. Biomass Valori, 2020.
URL : https://hal.archives-ouvertes.fr/hal-02508074

E. D. Fornué, G. G. Allan, H. J. Quiñones, G. T. González, and J. T. Saucedo, Fundamental aspects of adhesion between cellulosic surfaces in contact-a review, O Papel, vol.72, pp.85-90, 2011.

E. J. Foster, R. J. Moon, U. P. Agarwal, M. J. Bortner, J. Bras et al., Current characterization methods for cellulose nanomaterials, Chem. Soc. Rev, vol.47, pp.2609-2679, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02350540

S. Fujisawa, E. Togawa, and K. Kuroda, Nanocellulose-stabilized Pickering emulsions and their applications, Sci. Technol. Adv. Mat, vol.18, pp.959-971, 2017.

P. Gan, S. Sam, M. F. Abdullah, O. , and M. F. , Thermal properties of nanocellulose-reinforced composites: a review, J. Appl. Polym. Sci, vol.137, p.48544, 2020.

A. Gao, H. Chen, A. Hou, and K. Xie, Preparation of high-aspectratio cellulose nanocrystals by solvothermal synthesis followed by mechanical exfoliation, Cellulose, vol.26, pp.5937-5945, 2019.

H. Gao, Q. Sun, Z. Han, J. Li, B. Liao et al., Comparison of bacterial nanocellulose produced by different strains under static and agitated culture conditions, Carbohyd. Polym, vol.227, p.115323, 2020.

C. Gebald, J. A. Wurzbacher, P. Tingaut, T. Zimmermann, and A. Steinfeld, Amine-based nanofibrillated cellulose as adsorbent for CO 2 capture from air, Environ. Sci. Technol, vol.45, pp.9101-9108, 2011.

J. George and S. Sabapathi, Cellulose nanocrystals: synthesis, functional properties, and applications, Nanotechnol. Sci. Appl, vol.8, pp.45-54, 2015.

W. Gindl-altmutter and S. Veigel, Nanocellulose-modified wood adhesives, Handbook of Green Materials: Processing Technologies, Properties and Applications, pp.253-264, 2014.

B. Gitari, B. P. Chang, M. Misra, A. Navabi, and A. K. Mohanty, A comparative study on the mechanical, thermal, and water barrier properties of PLA nanocomposite films prepared with bacterial nanocellulose and cellulose nanofibrils, Bioresources, vol.14, pp.1867-1889, 2019.

J. Glasing, P. G. Jessop, P. Champagne, W. Y. Hamad, and M. F. Cunningham, Microsuspension polymerization of styrene using cellulose nanocrystals as pickering emulsifiers: on the evolution of latex particles, Langmuir, vol.36, pp.796-809, 2019.

Y. Goi, S. Fujisawa, T. Saito, K. Yamane, K. Kuroda et al., Dual functions of tempo-oxidized cellulose nanofibers in oil-in-water emulsions: a pickering emulsifier and a unique dispersion stabilizer, Langmuir, vol.35, pp.10920-10926, 2019.

H. Golmohammadi, E. Morales-narvaez, T. Naghdi, and A. Merkoci, Nanocellulose in sensing and biosensing, Chem. Mater, vol.29, pp.5426-5446, 2017.

S. Gopi, P. Balakrishnan, D. Chandradhara, D. Poovathankandy, T. et al., General scenarios of cellulose and its use in the biomedical field, Mater. Today Chem, vol.13, pp.59-78, 2019.

N. Grishkewich, N. Mohammed, J. Tang, and K. C. Tam, Recent advances in the application of cellulose nanocrystals, Curr. Opin. Colloid Interface Sci, vol.29, pp.32-45, 2017.

A. Grumezescu, Fabrication and Self-Assembly of Nanobiomaterials: Applications of Nanobiomaterials, 2016.

H. Gu, X. Zhou, S. Lyu, D. Pan, M. Dong et al., Magnetic nanocellulose-magnetite aerogel for easy oil adsorption, J. Colloid Interface Sci, vol.560, pp.849-856, 2020.

Y. Habibi, L. A. Lucia, and O. J. Rojas, Cellulose nanocrystals: chemistry, self-assembly, and applications, Chem. Rev, vol.110, pp.3479-3500, 2010.

S. A. Hamed and M. L. Hassan, A new mixture of hydroxypropyl cellulose and nanocellulose for wood consolidation, J. Cult. Herit, vol.35, pp.140-144, 2019.

H. Hamedi, S. Moradi, S. M. Hudson, and A. E. Tonelli, Chitosan based hydrogels and their applications for drug delivery in wound dressings: a review, Carbohyd. Polym, vol.199, pp.445-460, 2018.

S. S. Hassan, G. A. Williams, and A. K. Jaiswal, Emerging technologies for the pretreatment of lignocellulosic biomass, Bioresour. Technol, vol.262, pp.310-318, 2018.

X. He, H. Deng, and H. Hwang, The current application of nanotechnology in food and agriculture, J. Food. Drug. Anal, vol.27, pp.1-21, 2019.

H. J. Hong, H. Yu, S. Hong, J. Y. Hwang, S. M. Kim et al., Modified tunicate nanocellulose liquid crystalline fiber as closed loop for recycling platinum-group metals, Carbohyd. Polym, vol.228, p.115424, 2020.

Z. Hu, S. Ballinger, R. Pelton, and E. D. Cranston, Surfactant-enhanced cellulose nanocrystal Pickering emulsions, J. Colloid Interface Sci, vol.439, pp.139-148, 2015.

Z. Hu, T. Patten, R. Pelton, and E. D. Cranston, Synergistic stabilization of emulsions and emulsion gels with water-soluble polymers and cellulose nanocrystals, ACS Sustain. Chem. Eng, vol.3, pp.1023-1031, 2015.

S. Huan, R. Ajdary, L. Bai, V. Klar, and O. J. Rojas, Low solids emulsion gels based on nanocellulose for 3D-printing, Biomacromolecules, vol.20, pp.635-644, 2018.

S. Huan, B. D. Mattos, R. Ajdary, W. Xiang, L. Bai et al., Twophase emulgels for direct ink writing of skin-bearing architectures, Adv. Funct. Mater, vol.29, p.1902990, 2019.

J. Huang, X. Ma, G. Yang, A. , and D. , Introduction to nanocellulose, Nanocellulose: From Fundamentals to Advanced Materials, pp.1-20, 2020.

S. Huang, L. Zhou, M. C. Li, Q. Wu, and D. Zhou, Cellulose nanocrystals (CNCs) from corn stalk: activation energy analysis, Materials, vol.10, p.80, 2017.

Z. X. Huang, S. L. Cao, P. Xu, H. Wu, M. H. Zong et al., Preparation of a novel nanobiocatalyst by immobilizing penicillin acylase onto magnetic nanocrystalline cellulose and its use for efficient synthesis of cefaclor, Chem. Eng. J, vol.346, pp.361-368, 2018.

M. H. Hussin, D. Trache, C. T. Chuin, M. N. Fazita, M. M. Haafiz et al., Extraction of cellulose nanofibers and their eco-friendly polymer composites, Sustainable Polymer Composites and Nanocomposites, pp.653-691, 2019.

R. Ilyas, S. Sapuan, M. L. Sanyang, M. R. Ishak, and E. Zainudin, Nanocrystalline cellulose as reinforcement for polymeric matrix nanocomposites and its potential applications: a review, Curr. Anal. Chem, vol.14, pp.203-225, 2018.

M. T. Islam, M. M. Alam, M. ;. Zoccola, T. Saito, and H. Fukuzumi, Review on modification of nanocellulose for application in composites, Int. J. Innov. Res. Sci. Eng. Technol, vol.2, pp.71-85, 2011.

S. Iwamoto and T. Endo, 3 nm thick lignocellulose nanofibers obtained from esterified wood with maleic anhydride, ACS Macro Lett, vol.4, pp.80-83, 2015.

A. Jamshaid, A. Hamid, N. Muhammad, A. Naseer, M. Ghauri et al., Cellulose-based materials for the removal of heavy metals from wastewater-an overview, Chem. Biol. Eng. Rev, vol.4, pp.240-256, 2017.

M. Jawaid, S. Boufi, and H. P. Khalil, Cellulose-Reinforced Nanofibre Composites: Production, Properties and Applications, 2017.

M. K. Jeddi and M. Mahkam, Magnetic nano carboxymethyl cellulose-alginate/chitosan hydrogel beads as biodegradable devices for controlled drug delivery, Int. J. Biol. Macromol, vol.135, pp.829-838, 2019.

Y. Jin, Q. Jia, S. Shan, M. Jonoobi, R. Oladi et al., Different preparation methods and properties of nanostructured cellulose from various natural resources and residues: a review, Mater. Rep, vol.33, pp.935-969, 2015.

J. H. Jordan, M. W. Easson, B. Dien, S. Thompson, and B. D. Condon, Extraction and characterization of nanocellulose crystals from cotton gin motes and cotton gin waste, Cellulose, vol.26, pp.5959-5979, 2019.

M. Jorfi and E. J. Foster, Recent advances in nanocellulose for biomedical applications, J. Appl. Polym. Sci, vol.132, p.41719, 2015.

A. Kaboorani and B. Riedl, Surface modification of cellulose nanocrystals (CNC) by a cationic surfactant, vol.65, pp.45-55, 2015.

A. Kaboorani, B. Riedl, P. Blanchet, M. Fellin, O. Hosseinaei et al., Nanocrystalline cellulose (NCC): a renewable nano-material for polyvinyl acetate (PVA) adhesive, Eur. Polym. J, vol.48, pp.1829-1837, 2012.

I. Kalashnikova, H. Bizot, P. Bertoncini, B. Cathala, C. et al., Cellulosic nanorods of various aspect ratios for oil in water Pickering emulsions, Soft Matter, vol.9, pp.952-959, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00951873

H. Kalhori and R. Bagherpour, Application of carbonate precipitating bacteria for improving properties and repairing cracks of shotcrete, Constr. Build. Mater, vol.148, pp.249-260, 2017.

X. Kang, S. Kuga, C. Wang, Y. Zhao, M. Wu et al., Green preparation of cellulose nanocrystal and its application, ACS Sustain. Chem. Eng, vol.6, pp.2954-2960, 2018.

H. Kargarzadeh, I. Ahmad, S. Thomas, and A. Dufresne, Handbook of Nanocellulose and Cellulose Nanocomposites, 2017.

H. Kargarzadeh, J. Huang, N. Lin, I. Ahmad, M. Mariano et al., Recent developments in nanocellulose-based biodegradable polymers, thermoplastic polymers, and porous nanocomposites, Prog. Polym. Sci, vol.87, pp.197-227, 2018.

H. Kargarzadeh, M. Mariano, D. Gopakumar, I. Ahmad, S. Thomas et al., Advances in cellulose nanomaterials, Cellulose, vol.25, pp.2151-2189, 2018.

Z. Karim, S. Afrin, Q. Husain, and R. Danish, Necessity of enzymatic hydrolysis for production and functionalization of nanocelluloses, Crit. Rev. Biotechnol, vol.37, pp.355-370, 2017.

Z. Karim, A. P. Mathew, M. Grahn, J. Mouzon, and K. Oksman, Nanoporous membranes with cellulose nanocrystals as functional entity in chitosan: removal of dyes from water, Carbohyd. Polym, vol.112, pp.668-676, 2014.

K. Karimi and M. J. Taherzadeh, A critical review of analytical methods in pretreatment of lignocelluloses: composition, imaging, and crystallinity, Bioresour. Technol, vol.200, pp.1008-1018, 2016.

A. Karimian, H. Parsian, M. Majidinia, M. Rahimi, M. Mir et al., Nanocrystalline cellulose: preparation, physicochemical properties, and applications in drug delivery systems, Int. J. Biol. Macromol, vol.133, pp.850-859, 2019.

D. Kim, M. S. Islam, and M. K. Tam, The use of nanopolysaccharides in biomedical applications, Advanced Functional Materials from Nanopolysaccharides, pp.171-219, 2019.

J. Kim, J. D. Mann, and J. G. Spencer, Arsenic removal from water using lignocellulose adsorption medium (LAM), J. Environ. Sci. Health A, vol.41, pp.1529-1542, 2006.

J. H. Kim, D. Lee, Y. H. Lee, W. Chen, and S. Y. Lee, Nanocellulose for energy storage systems: beyond the limits of synthetic materials, Adv. Mater, vol.31, p.1804826, 2019.

A. Kiziltas, E. Erbas-kiziltas, S. Boran, and D. J. Gardner, Micro-and nanocellulose composites for automotive applications, Proceedings of SPE Automotive Composites Conference and Exhibition, 2013.

D. Klemm, E. D. Cranston, D. Fischer, M. Gama, S. A. Kedzior et al., Nanocellulose as a natural source for groundbreaking applications in materials science: Today's state, Mater. Today, vol.21, pp.720-748, 2018.

E. Kontturi, A. Meriluoto, P. A. Penttilä, N. Baccile, J. M. Malho et al., Degradation and crystallization of cellulose in hydrogen chloride vapor for high-yield isolation of cellulose nanocrystals, Angew. Chem. Int. Ed, vol.55, pp.14455-14458, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01429927

K. Köse, M. Mavlan, and J. P. Youngblood, , 2020.

, Applications and impact of nanocellulose based adsorbents, Cellulose, vol.27, pp.2967-2990

F. Kramer, D. Klemm, D. Schumann, N. Heßler, F. Wesarg et al., Nanocellulose polymer composites as innovative pool for (bio) material development, Macromol. Symp, vol.244, pp.136-148, 2006.

A. Kumar, H. Durand, E. Zeno, C. Balsollier, B. Watbled et al., The surface chemistry of a nanocellulose drug carrier unravelled by MAS-DNP, Chem. Sci, vol.11, pp.3868-3877, 2020.
URL : https://hal.archives-ouvertes.fr/hal-02566887

A. S. Kumar, S. Kalidhasan, V. Rajesh, and N. Rajesh, Application of cellulose-clay composite biosorbent toward the effective adsorption and removal of chromium from industrial wastewater, Ind. Eng. Chem. Res, vol.51, pp.58-69, 2012.

V. Kumar, P. Pathak, and N. K. Bhardwaj, Waste paper: an underutilized but promising source for nanocellulose mining. Waste Manage, vol.102, pp.281-303, 2020.

J. H. Kwon, S. H. Lee, N. Ayrilmis, and T. H. Han, Tensile shear strength of wood bonded with urea-formaldehyde with different amounts of microfibrillated cellulose, Int. J. Adhes. Adhes, vol.60, pp.88-91, 2015.

M. M. Langari, M. Nikzad, A. A. Ghoreyshi, and M. Mohammadi, Isolation of nanocellulose from broomcorn stalks and its application for nanocellulose/xanthan film preparation, Chem. Select, vol.4, pp.11987-11994, 2019.

D. Lasrado, S. Ahankari, and K. Kar, Nanocellulose-based polymer composites for energy applications-a review, J. Appl. Polym. Sci, vol.48959, 2020.

N. Lavoine and L. Bergström, Nanocellulose-based foams and aerogels: processing, properties, and applications, J. Mater. Chem. A, vol.5, pp.16105-16117, 2017.

J. Lazko, T. Sénéchal, A. Bouchut, Y. Paint, L. Dangreau et al., Acid-free extraction of cellulose type I nanocrystals using Brønsted acid-type ionic liquids, Nanocomposites, vol.2, pp.65-75, 2016.

L. Bras, D. Strømme, M. Mihranyan, and A. , Characterization of dielectric properties of nanocellulose from wood and algae for electrical insulator applications, J. Phys. Chem. B, vol.119, pp.5911-5917, 2015.

E. C. Lengowski, E. A. Júnior, M. M. Kumode, M. E. Carneiro, and K. G. Satyanarayana, Nanocellulose-reinforced adhesives for wood-based panels, Sustainable Polymer Composites and Nanocomposites, pp.1001-1025, 2019.

B. Li, C. Wu, Y. Zhang, X. Cao, and Z. Luo, Microstructure and thermal and tensile properties of poly (vinyl alcohol) nanocomposite films reinforced by polyacrylamide grafted cellulose nanocrystals, J. Macromol. Sci. B, vol.59, pp.223-234, 2020.

J. Li, R. Cha, K. Mou, X. Zhao, K. Long et al., , 2018.

, Nanocellulose-Based Antibacterial Materials. Adv. Healthc. Mater, vol.7, p.1800334

N. Li and R. Bai, Copper adsorption on chitosan-cellulose hydrogel beads: behaviors and mechanisms, Sep. Purif. Technol, vol.42, pp.237-247, 2005.

W. Li, B. Ju, and S. Zhang, Novel amphiphilic cellulose nanocrystals for pH-responsive Pickering emulsions, Carbohyd. Polym, vol.229, p.115401, 2020.

Y. Li, L. Cao, L. Li, Y. , and C. , In situ growing directional spindle TiO2 nanocrystals on cellulose fibers for enhanced Pb2+ adsorption from water, J. Hazard. Mater, vol.289, pp.140-148, 2015.

L. Liang, S. Bhagia, M. Li, C. Huang, and A. J. Ragauskas, Cross-linked nanocellulosic materials and their applications, Chem. Sus. Chem, vol.13, pp.78-87, 2020.

K. H. Lin, T. Enomae, C. , and F. C. , Cellulose nanocrystal isolation from hardwood pulp using various hydrolysis conditions, Molecules, vol.24, p.3724, 2019.

N. Lin and A. Dufresne, Nanocellulose in biomedicine: current status and future prospect, Eur. Polym. J, vol.59, pp.302-325, 2014.

N. Lin, J. Huang, and A. Dufresne, Preparation, properties and applications of polysaccharide nanocrystals in advanced functional nanomaterials: a review, Nanoscale, vol.4, pp.3274-3294, 2012.

N. Lin, J. Tang, A. Dufresne, and M. K. Tam, Advanced Functional Materials from Nanopolysaccharides, 2019.

C. Liu, B. Li, H. Du, D. Lv, Y. Zhang et al., Properties of nanocellulose isolated from corncob residue using sulfuric acid, formic acid, oxidative and mechanical methods, Carbohyd. Polym, vol.151, pp.716-724, 2016.

D. Liu, J. Song, D. P. Anderson, P. R. Chang, and Y. Hua, Bamboo fiber and its reinforced composites: structure and properties, Cellulose, vol.19, pp.1449-1480, 2012.

F. Liu, J. Zheng, C. H. Huang, C. H. Tang, and S. Y. Ou, Pickering high internal phase emulsions stabilized by protein-covered cellulose nanocrystals. Food Hydrocoll, vol.82, pp.96-105, 2018.

L. Liu and F. Kong, In vitro investigation of the influence of nanofibrillated cellulose on lipid digestion and absorption, Int. J. Biol. Macromol, vol.139, pp.361-366, 2019.

Y. Liu, Y. Nie, X. Lu, X. Zhang, H. He et al., Cascade utilization of lignocellulosic biomass to high-value products, Green Chem, vol.21, pp.3499-3535, 2019.

Y. Liu, C. Schütz, G. Salazar-alvarez, and L. Bergström, Assembly, gelation, and helicoidal consolidation of nanocellulose dispersions, Langmuir, vol.35, pp.3600-3606, 2019.

J. Lu, C. Sun, K. Yang, K. Wang, Y. Jiang et al., Properties of polylactic acid reinforced by hydroxyapatite modified nanocellulose, Polymers, vol.11, p.1009, 2019.

Y. Lu, H. L. Tekinalp, C. C. Eberle, W. Peter, A. K. Naskar et al., Nanocellulose in polymer composites and biomedical applications, TAPPI J, vol.13, pp.47-54, 2014.

M. A. Lubis, M. K. Hong, and B. D. Park, Hydrolytic removal of cured urea-formaldehyde resins in medium-density fiberboard for recycling, J. Wood Chem. Technol, vol.38, pp.1-14, 2018.

H. Luo, R. Cha, J. Li, W. Hao, Y. Zhang et al., Advances in tissue engineering of nanocellulose-based scaffolds: a review, Carbohyd. Polym, vol.224, p.115144, 2019.

A. Mackie, S. Gourcy, N. Rigby, J. Moffat, I. Capron et al., The fate of cellulose nanocrystal stabilised emulsions after simulated gastrointestinal digestion and exposure to intestinal mucosa, Nanoscale, vol.11, pp.2991-2998, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02620025

N. Mahfoudhi and S. Boufi, Nanocellulose as a novel nanostructured adsorbent for environmental remediation: a review, Cellulose, vol.24, pp.1171-1197, 2017.

L. C. Malucelli, L. G. Lacerda, M. Dziedzic, and M. A. Da-silva-carvalho-filho, Preparation, properties and future perspectives of nanocrystals from agro-industrial residues: a review of recent research, Rev. Environ. Sci. Biol, vol.16, pp.131-145, 2017.

J. Mao, H. Abushammala, N. Brown, and M. Laborie, Comparative assessment of methods for producing cellulose I nanocrystals from cellulosic sources. Nanocelluloses: their preparation, properties, and applications, ACS Symposium Series, pp.19-53, 2017.

M. Mariano, N. El-kissi, and A. Dufresne, Cellulose nanocrystals and related nanocomposites: review of some properties and challenges, J. Polym. Sci. Pol. Phys, vol.52, pp.791-806, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01984784

R. Meng, L. Liu, Y. Jin, Z. Luo, H. Gao et al., Recyclable carboxylated cellulose beads with tunable pore structure and size for highly efficient dye removal, Cellulose, vol.26, pp.8963-8969, 2019.

C. Miao and W. Y. Hamad, Critical insights into the reinforcement potential of cellulose nanocrystals in polymer nanocomposites, Curr. Opin. Solid State Mater. Sci, vol.23, p.100761, 2019.

S. Mishra, P. S. Kharkar, and A. M. Pethe, Biomass and waste materials as potential sources of nanocrystalline cellulose: comparative review of preparation methods (2016-Till date), Carbohyd. Polym, vol.207, pp.418-427, 2019.

D. Miyashiro, R. Hamano, and K. Umemura, A review of applications using mixed materials of cellulose, nanocellulose and carbon nanotubes, Nanomaterials, vol.10, p.186, 2020.

T. Moberg, K. Sahlin, K. Yao, S. Geng, G. Westman et al., Rheological properties of nanocellulose suspensions: effects of fibril/particle dimensions and surface characteristics, Cellulose, vol.24, pp.2499-2510, 2017.

G. D. Mogo?anu and A. M. Grumezescu, Natural and synthetic polymers for wounds and burns dressing, Int. J. Pharm, vol.463, pp.127-136, 2014.

M. S. Mohaiyiddin, O. H. Lin, W. T. Owi, C. H. Chan, C. H. Chia et al., Characterization of nanocellulose recovery from Elaeis guineensis frond for sustainable development, Clean Technol. Environ. Policy, vol.18, pp.2503-2512, 2016.

M. A. Mohamed, M. A. Mutalib, Z. A. Hir, M. Zain, A. B. Mohamad et al., An overview on cellulose-based material in tailoring bio-hybrid nanostructured photocatalysts for water treatment and renewable energy applications, Int. J. Biol. Macromol, vol.103, pp.1232-1256, 2017.

M. A. Mohamed, W. Salleh, J. Jaafar, A. Ismail, M. A. Mutalib et al., Physicochemical characterization of cellulose nanocrystal and nanoporous self-assembled CNC membrane derived from Ceiba pentandra, Carbohyd. Polym, vol.157, pp.1892-1902, 2017.

N. Mohammed, N. Grishkewich, R. M. Berry, and K. C. Tam, Cellulose nanocrystal-alginate hydrogel beads as novel adsorbents for organic dyes in aqueous solutions, Cellulose, vol.22, pp.3725-3738, 2015.

T. Mokhena, J. , and M. , Cellulose nanomaterials: new generation materials for solving global issues, Cellulose, vol.27, pp.1149-1194, 2020.

F. Montes, T. Fu, J. P. Youngblood, and J. Weiss, Rheological impact of using cellulose nanocrystals (CNC) in cement pastes, Constr. Build. Mater, vol.235, p.117497, 2020.

J. Moohan, S. A. Stewart, E. Espinosa, A. Rosal, A. Rodríguez et al., Cellulose nanofibers and other biopolymers for biomedical applications, A review. Appl. Sci, vol.10, p.65, 2020.

R. J. Moon, G. T. Schueneman, and J. Simonsen, Overview of cellulose nanomaterials, their capabilities and applications, JOM, vol.68, pp.2383-2394, 2016.

S. Nandi and P. Guha, A review on preparation and properties of cellulose nanocrystal-incorporated natural biopolymer, J. Package Technol. Res, vol.2, pp.149-166, 2018.

D. M. Nascimento, Y. L. Nunes, M. C. Figueirêdo, H. M. De-azeredo, F. A. Aouada et al., Nanocellulose nanocomposite hydrogels: technological and environmental issues, Green Chem, vol.20, pp.2428-2448, 2018.

S. Naz, J. S. Ali, Z. , and M. , Nanocellulose isolation characterization and applications: a journey from non-remedial to biomedical claims, Biodesign Manuf, vol.2, pp.187-212, 2019.

O. Nechyporchuk, M. N. Belgacem, and J. Bras, Production of cellulose nanofibrils: a review of recent advances, vol.93, pp.2-25, 2016.

J. Nemoto, T. Saito, and A. Isogai, Simple freeze-drying procedure for producing nanocellulose aerogel-containing, high-performance air filters, ACS Appl. Mater. Interfaces, vol.7, 2015.

N. C. Nepomuceno, A. S. Santos, J. E. Oliveira, G. M. Glenn, and E. S. Medeiros, Extraction and characterization of cellulose nanowhiskers from Mandacaru, Cereus jamacaru DC.) spines. Cellulose, vol.24, pp.119-129, 2017.

W. P. Neto, M. Mariano, I. S. Da-silva, H. A. Silvério, J. L. Putaux et al., Mechanical properties of natural rubber nanocomposites reinforced with high aspect ratio cellulose nanocrystals isolated from soy hulls, Carbohyd. Polym, vol.153, pp.143-152, 2016.
URL : https://hal.archives-ouvertes.fr/hal-02106226

R. M. Neves, K. S. Lopes, M. V. Zimmermann, M. Poletto, and A. J. Zattera, Characterization of polystyrene nanocomposites and expanded nanocomposites reinforced with cellulose nanofibers and nanocrystals, Cellulose, vol.26, pp.4417-4429, 2019.

H. M. Ng, L. T. Sin, S. T. Bee, T. T. Tee, and A. Rahmat, Review of nanocellulose polymer composite characteristics and challenges, Polym Plast. Technol, vol.56, pp.687-731, 2017.

R. Nigmatullin, M. A. Johns, J. C. Muñoz-garcía, V. Gabrielli, J. Schmitt et al., Hydrophobization of cellulose nanocrystals for aqueous colloidal suspensions and gels, Biomacromolecules, 2020.

L. P. Novo, J. Bras, A. García, N. Belgacem, and A. A. Curvelo, Subcritical water: a method for green production of cellulose nanocrystals, ACS Sustain. Chem. Eng, vol.3, pp.2839-2846, 2015.

L. P. Novo, J. Bras, A. García, N. Belgacem, and A. A. Da-silva-curvelo, A study of the production of cellulose nanocrystals through subcritical water hydrolysis, Ind. Crop Prod, vol.93, pp.88-95, 2016.

G. M. Ntoutoume, R. Granet, J. P. Mbakidi, F. Brégier, D. Y. Léger et al., Development of curcumin-cyclodextrin/cellulose nanocrystals complexes: new anticancer drug delivery systems, Bioorg. Med. Chem. Lett, vol.26, pp.941-945, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01257118

A. Nuryawan, A. P. Singh, M. Zanetti, B. D. Park, and V. Causin, Insights into the development of crystallinity in liquid urea-formaldehyde resins, Int. J. Adhes. Adhes, vol.72, pp.62-69, 2017.

K. Oksman, Y. Aitomäki, A. P. Mathew, G. Siqueira, Q. Zhou et al., Review of the recent developments in cellulose nanocomposite processing, Compos. Part. A Appl. Sci. Manuf, vol.83, pp.2-18, 2016.

K. Oksman and A. Bismarck, Handbook of Green Materials: Processing Technologies, Properties and Applications (in 4 volumes), vol.5, 2014.

S. H. Osong, S. Norgren, and P. Engstrand, Processing of woodbased microfibrillated cellulose and nanofibrillated cellulose, and applications relating to papermaking: a review, Cellulose, vol.23, pp.93-123, 2016.

D. A. Osorio, B. E. Lee, J. M. Kwiecien, X. Wang, I. Shahid et al., Cross-linked cellulose nanocrystal aerogels as viable bone tissue scaffolds, Acta Biomater, vol.87, pp.152-165, 2019.

A. A. Oun and J. W. Rhim, Characterization of nanocelluloses isolated from Ushar (Calotropis procera) seed fiber: effect of isolation method, Mater. Lett, vol.168, pp.146-150, 2016.

A. A. Oun, S. Shankar, and J. W. Rhim, Multifunctional nanocellulose/metal and metal oxide nanoparticle hybrid nanomaterials, 2020.

, Crit. Rev. Food Sci. Nutr, vol.60, pp.435-460

J. Pandey, H. Takagi, A. Nakagaito, K. , and H. , Handbook of Polymer Nanocomposites. Processing, Performance and Application, 2015.

Z. Pang, P. Wang, D. , and C. , Ultrasonic pretreatment of cellulose in ionic liquid for efficient preparation of cellulose nanocrystals, Cellulose, vol.25, pp.7053-7064, 2018.

B. D. Park and V. Causin, Crystallinity and domain size of cured ureaformaldehyde resin adhesives with different formaldehyde/urea mole ratios, Eur. Polym. J, vol.49, pp.532-537, 2013.

N. M. Park, S. Choi, J. E. Oh, and D. Y. Hwang, Facile extraction of cellulose nanocrystals, Carbohyd. Polym, vol.223, p.115114, 2019.

S. X. Peng, S. Shrestha, Y. Yoo, and J. P. Youngblood, Enhanced dispersion and properties of a two-component epoxy nanocomposite using surface modified cellulose nanocrystals, Polymer, vol.112, pp.359-368, 2017.

J. Pennells, I. D. Godwin, N. Amiralian, and D. J. Martin, Trends in the production of cellulose nanofibers from non-wood sources, Cellulose, vol.27, pp.575-593, 2020.

P. Phanthong, P. Reubroycharoen, X. Hao, G. Xu, A. Abudula et al., Nanocellulose: extraction and application, Carbon Resour. Convers, vol.1, pp.32-43, 2018.

L. Pindáková, V. Ka?párková, and R. Bordes, Role of protein-cellulose nanocrystal interactions in the stabilization of emulsion, J. Colloid Interface Sci, vol.557, pp.196-206, 2019.

J. R. Pires, V. G. Souza, and A. L. Fernando, Valorization of energy crops as a source for nanocellulose production-current knowledge and future prospects, Ind. Crop Prod, vol.140, p.111642, 2019.

D. Plackett, K. Letchford, J. Jackson, and H. Burt, A review of nanocellulose as a novel vehicle for drug delivery, Nord. Pulp Paper Res. J, vol.29, pp.105-118, 2014.

J. N. Putro, A. Kurniawan, S. Ismadji, and Y. H. Ju, Nanocellulose based biosorbents for wastewater treatment: study of isotherm, kinetic, thermodynamic and reusability, Environ. Nanotechnol. Monit. Manage, vol.8, pp.134-149, 2017.

J. Qu, Z. Yuan, C. Wang, A. Wang, X. Liu et al., Enhancing the redispersibility of TEMPO-mediated oxidized cellulose nanofibrils in N,Ndimethylformamide by modification with cetyltrimethylammonium bromide, Bioresour. Technol, vol.26, pp.83-91, 2016.

M. Rajinipriya, M. Nagalakshmaiah, M. Robert, and S. Elkoun, Importance of agricultural and industrial waste in the field of nanocellulose and recent industrial developments of wood based nanocellulose: a review, ACS Sustain. Chem. Eng, vol.6, pp.2807-2828, 2018.

B. Ram and G. S. Chauhan, New spherical nanocellulose and thiol-based adsorbent for rapid and selective removal of mercuric ions, Chem. Eng. J, vol.331, pp.587-596, 2018.

J. Ramasamy, A. , and M. , Nanocellulose for oil and gas field drilling and cementing applications, J. Pet. Sci. Eng, vol.184, p.106292, 2020.

M. S. Reid, J. Erlandsson, and L. Wågberg, Interfacial polymerization of cellulose nanocrystal polyamide janus nanocomposites with controlled architectures, ACS Macro Lett, vol.8, pp.1334-1340, 2019.

I. Reiniati, A. N. Hrymak, and A. Margaritis, Recent developments in the production and applications of bacterial cellulose fibers and nanocrystals, Crit. Rev. Biotechnol, vol.37, pp.510-524, 2017.

S. Rezania, B. Oryani, J. Cho, A. Talaiekhozani, F. Sabbagh et al., Different pretreatment technologies of lignocellulosic biomass for bioethanol production: an overview, Energy, vol.199, p.117457, 2020.

K. Richter, N. Bordeanu, F. López-suevos, and T. Zimmermann, Performance of cellulose nanofibrils in wood adhesives, Proceedings of the Swiss Bonding, pp.239-246, 2009.

D. Rigotti, R. Checchetto, S. Tarter, D. Caretti, M. Rizzuto et al., Polylactic acid-lauryl functionalized nanocellulose nanocomposites: microstructural, thermo-mechanical and gas transport properties, Express Polym. Lett, vol.13, pp.858-876, 2019.

E. Robles, J. Fernández-rodríguez, A. M. Barbosa, O. Gordobil, N. L. Carreño et al., Production of cellulose nanoparticles from blue agave waste treated with environmentally friendly processes, Carbohyd. Polym, vol.183, pp.294-302, 2018.

E. Robles, I. Urruzola, J. Labidi, and L. Serrano, Surface-modified nanocellulose as reinforcement in poly(lactic acid) to conform new composites, Ind. Crop Prod, vol.71, pp.44-53, 2015.

C. Rodriguez, A. Alaswad, K. Benyounis, and A. G. Olabi, Pretreatment techniques used in biogas production from grass, Renew. Sustain. Energy Rev, vol.68, pp.1193-1204, 2017.

R. Rohaizu and W. Wanrosli, Sono-assisted TEMPO oxidation of oil palm lignocellulosic biomass for isolation of nanocrystalline cellulose, Ultrason. Sonochem, vol.34, pp.631-639, 2017.

H. Rosilo, J. R. Mckee, E. Kontturi, T. Koho, V. P. Hytönen et al., Cationic polymer brush-modified cellulose nanocrystals for high-affinity virus binding, Nanoscale, vol.6, pp.11871-11881, 2014.

N. Saba, F. Mohammad, M. Pervaiz, M. Jawaid, O. Y. Alothman et al., Mechanical, morphological and structural properties of cellulose nanofibers reinforced epoxy composites, Int. J. Biol. Macromol, vol.97, pp.190-200, 2017.

C. J. Saelices, M. Save, C. , and I. , Synthesis of latex stabilized by unmodified cellulose nanocrystals: the effect of monomers on particle size, Polym. Chem, vol.10, pp.727-737, 2019.
URL : https://hal.archives-ouvertes.fr/hal-01987494

S. Salimi, R. Sotudeh-gharebagh, R. Zarghami, S. Y. Chan, and K. H. Yuen, Production of nanocellulose and its applications in drug delivery: a critical review, ACS Sustain. Chem. Eng, vol.7, pp.15800-15827, 2019.

L. M. Sampaio, J. Padrão, J. Faria, J. P. Silva, C. J. Silva et al., Laccase immobilization on bacterial nanocellulose membranes: a atimicrobial, kinetic and stability properties, Carbohyd. Polym, vol.145, pp.1-12, 2016.

P. Sathishkumar, S. Kamala-kannan, M. Cho, J. S. Kim, T. Hadibarata et al., Laccase immobilization on cellulose nanofiber: the catalytic efficiency and recyclic application for simulated dye effluent treatment, J. Mol. Catal. B Enzym, vol.100, pp.111-120, 2014.

A. Satlewal, R. Agrawal, S. Bhagia, J. Sangoro, and A. J. Ragauskas, Natural deep eutectic solvents for lignocellulosic biomass pretreatment: recent developments, challenges and novel opportunities, Biotechnol. Adv, vol.36, pp.2032-2050, 2018.

A. B. Seabra, J. S. Bernardes, W. J. Fávaro, A. J. Paula, and N. Durán, Cellulose nanocrystals as carriers in medicine and their toxicities: a review, Carbohyd. Polym, vol.181, pp.514-527, 2018.

H. Sehaqui, K. Kulasinski, N. Pfenninger, T. Zimmermann, and P. Tingaut, Highly carboxylated cellulose nanofibers via succinic anhydride esterification of wheat fibers and facile mechanical disintegration, Biomacromolecules, vol.18, pp.242-248, 2017.

A. Serpa, J. Velásquez-cock, P. Gañán, C. Castro, L. Vélez et al., Vegetable nanocellulose in food science: a review. Food Hydrocoll, vol.57, pp.178-186, 2016.

J. Sethi, K. Oksman, M. Illikainen, and J. A. Sirviö, Sonication-assisted surface modification method to expedite the water removal from cellulose nanofibers for use in nanopapers and paper making, Carbohyd. Polym, vol.197, pp.92-99, 2018.

T. I. Shaheen and H. E. Emam, Sono-chemical synthesis of cellulose nanocrystals from wood sawdust using acid hydrolysis, Int. J. Biol. Macromol, vol.107, pp.1599-1606, 2018.

T. I. Shaheen, A. Montaser, L. , and S. , Effect of cellulose nanocrystals on scaffolds comprising chitosan, alginate and hydroxyapatite for bone tissue engineering, Int. J. Biol. Macromol, vol.121, pp.814-821, 2019.
URL : https://hal.archives-ouvertes.fr/hal-01964880

A. Sharma, M. Thakur, M. Bhattacharya, T. Mandal, and S. Goswami, Commercial application of cellulose nano-compositesa review, Biotechnol. Rep, vol.15, p.316, 2019.

C. Sharma and N. K. Bhardwaj, Bacterial nanocellulose: present status, biomedical applications and future perspectives, Mater. Sci. Eng. C, vol.104, p.109963, 2019.

P. R. Sharma, S. K. Sharma, T. Lindström, and B. S. Hsiao, Nanocelluloseenabled membranes for water purification: perspectives, Adv. Sustain. Syst, 2020.

J. Shojaeiarani, D. Bajwa, and A. Shirzadifar, A review on cellulose nanocrystals as promising biocompounds for the synthesis of nanocomposite hydrogels, Carbohyd. Polym, vol.216, pp.247-259, 2019.

A. P. Singh, V. Causin, A. Nuryawan, and B. D. Park, Morphological, chemical and crystalline features of urea-formaldehyde resin cured in contact with wood, Eur. Polym. J, vol.56, pp.185-193, 2014.

R. Singh, A. Shukla, S. Tiwari, and M. Srivastava, A review on delignification of lignocellulosic biomass for enhancement of ethanol production potential, Renew. Sustain. Energy Rev, vol.32, pp.713-728, 2014.

J. A. Sirviö, M. Visanko, and H. Liimatainen, Acidic deep eutectic solvents as hydrolytic media for cellulose nanocrystal production, Biomacromolecules, vol.17, pp.3025-3032, 2016.

A. N. Smith, K. Märker, S. Hediger, and G. De-paëpe, Natural isotopic abundance 13C and 15N multidimensional solid-state NMR enabled by dynamic nuclear polarization, J. Phys. Chem. Lett, vol.10, pp.4652-4662, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02322267

K. Song, Y. Ji, L. Wang, Y. Wei, Y. et al., A green and environmental benign method to extract cellulose nanocrystal by ball mill assisted solid acid hydrolysis, J. Clean. Prod, vol.196, pp.1169-1175, 2018.

F. Stoeckel, J. Konnerth, and W. Altmutter, Mechanical properties of adhesives for bonding wood-a review, Int. J. Adhes. Adhes, vol.45, pp.32-41, 2013.

B. Sun, Q. Hou, Z. Liu, and Y. Ni, Sodium periodate oxidation of cellulose nanocrystal and its application as a paper wet strength additive, Cellulose, vol.22, pp.1135-1146, 2015.

R. Sunasee, U. D. Hemraz, and K. Ckless, Cellulose nanocrystals: a versatile nanoplatform for emerging biomedical applications, Expert Opin. Drug Deliv, vol.13, pp.1243-1256, 2016.

O. V. Surov, M. I. Voronova, N. V. Rubleva, L. A. Kuzmicheva, D. Nikitin et al., A novel effective approach of nanocrystalline cellulose production: oxidation-hydrolysis strategy, Cellulose, vol.25, pp.5035-5048, 2018.

T. H. Tan, H. V. Lee, W. A. Dabdawb, and S. B. Hamid, A review of nanocellulose in the drug-delivery system, Materials for Biomedical Engineering: Nanomaterials-Based Drug Delivery, pp.131-164, 2019.

C. Tang, Y. Chen, J. Luo, M. Y. Low, Z. Shi et al., Pickering emulsions stabilized by hydrophobically modified nanocellulose containing various structural characteristics, Cellulose, vol.26, pp.7753-7767, 2019.

J. Tang, R. M. Berry, and K. C. Tam, Stimuli-responsive cellulose nanocrystals for surfactant-free oil harvesting, Biomacromolecules, vol.17, pp.1748-1756, 2016.

J. Tang, N. Lin, Z. Zhang, C. Pan, Y. et al., Nanopolysaccharides in emulsion stabilization, Advanced Functional Materials from Nanopolysaccharides, pp.221-254, 2019.

L. Tang, F. Lin, T. Li, Z. Cai, B. Hong et al., Design and synthesis of functionalized cellulose nanocrystals-based drug conjugates for colon-targeted drug delivery, Cellulose, vol.25, pp.4525-4536, 2018.

H. Tao, N. Lavoine, F. Jiang, J. Tang, L. et al., Reducing end modification on cellulose nanocrystals: strategy, characterization, applications and challenges, Nanoscale Horizons, vol.5, pp.607-627, 2020.

A. F. Tarchoun, D. Trache, and T. M. Klapötke, Microcrystalline cellulose from Posidonia oceanica brown algae: extraction and characterization, Int. J. Biol. Macromol, vol.138, pp.837-845, 2019.

A. F. Tarchoun, D. Trache, T. M. Klapötke, S. Chelouche, M. Derradji et al., A promising energetic polymer from Posidonia oceanica brown algae: synthesis, characterization, and kinetic modeling, Macromol. Chem. Phys, vol.220, p.1900358, 2019.

A. F. Tarchoun, D. Trache, T. M. Klapötke, M. Derradji, and W. Bessa, Ecofriendly isolation and characterization of microcrystalline cellulose from giant reed using various acidic media, Cellulose, vol.26, pp.7635-7651, 2019.

S. Tarimala and L. L. Dai, Structure of microparticles in solid-stabilized emulsions, Langmuir, vol.20, pp.3492-3494, 2004.

P. Tayeb and A. H. Tayeb, Application of nanocellulose in sustainable electrochemical and piezoelectric systems: a review, Carbohyd. Polym, vol.224, p.115149, 2019.

V. K. Thakur, Lignocellulosic Polymer Composites: Processing, Characterization, and Properties, 2015.

V. K. Thakur, Nanocellulose Polymer Nanocomposites: Fundamentals and Applications, 2015.

V. K. Thakur, M. K. Thakur, and R. K. Gupta, Rapid synthesis of graft copolymers from natural cellulose fibers, Carbohyd. Polym, vol.98, pp.820-828, 2013.

B. Thomas, M. C. Raj, J. Joy, A. Moores, G. L. Drisko et al., Nanocellulose, a versatile green platform: from biosources to materials and their applications, Chem. Rev, vol.118, pp.11575-11625, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01982619

X. Tong, W. Shen, X. Chen, M. Jia, and J. C. Roux, Preparation and mechanism analysis of morphology-controlled cellulose nanocrystals via compound enzymatic hydrolysis of eucalyptus pulp, J. Appl. Polym. Sci, vol.137, p.48407, 2020.

D. Trache, Microcrystalline cellulose and related polymer somposites: synthesis, characterization and properties, Handbook of Composites From Renewable Materials, pp.61-92, 2017.

D. Trache, Nanocellulose as a promising sustainable material for biomedical applications, AIMS Mater. Sci, vol.5, pp.201-205, 2018.

D. Trache, M. H. Hussin, C. T. Chuin, S. Sabar, M. N. Fazita et al., Microcrystalline cellulose: isolation, characterization and biocomposites application-a review, Int. J. Biol. Macromol, vol.93, pp.789-804, 2016.

D. Trache, M. H. Hussin, M. M. Haafiz, and V. K. Thakur, Recent progress in cellulose nanocrystals: sources and production, Nanoscale, vol.9, pp.1763-1786, 2017.

D. Trache, K. Khimeche, A. Mezroua, and M. Benziane, Physicochemical properties of microcrystalline nitrocellulose from Alfa grass fibres and its thermal stability, J. Therm. Anal. Calorim, vol.124, pp.1485-1496, 2016.

D. Trache, A. F. Tarchoun, M. Derradji, O. Mehelli, M. H. Hussin et al., Cellulose fibers and nanocrystals: preparation, characterization and surface modification, Available online at, 2020.

A. Tshikovhi, S. B. Mishra, and A. K. Mishra, Nanocellulose-based composites for the removal of contaminants from wastewater, Int. J. Biol. Macromol, vol.152, pp.616-632, 2020.

S. Ummartyotin and H. Manuspiya, A critical review on cellulose: from fundamental to an approach on sensor technology, Renew. Sustain. Energy Rev, vol.41, pp.402-412, 2015.

C. Uth, S. Zielonka, S. Hörner, N. Rasche, A. Plog et al., A chemoenzymatic approach to protein immobilization onto crystalline cellulose nanoscaffolds, Angew. Chem. Int. Ed, vol.53, pp.12618-12623, 2014.

A. Vazquez, M. L. Foresti, J. I. Moran, and V. P. Cyras, Extraction and production of cellulose nanofibers, Handbook of Polymer Nanocomposites. Processing, pp.81-118, 2015.

S. Veigel, U. Müller, J. Keckes, M. Obersriebnig, and W. Altmutter, Cellulose nanofibrils as filler for adhesives: effect on specific fracture energy of solid wood-adhesive bonds, Cellulose, vol.18, p.1227, 2011.

S. Veigel, J. Rathke, M. Weigl, and W. Altmutter, Particle board and oriented strand board prepared with nanocellulose-reinforced adhesive, J. Nanomater, p.158503, 2012.

J. Velásquez-cock, C. Castro, P. Gañán, M. Osorio, J. L. Putaux et al., Influence of the maturation time on the physicochemical properties of nanocellulose and associated constituents isolated from pseudostems of banana plant c, v. Valery. Ind. Crop. Prod, vol.83, pp.551-560, 2016.

K. Vijayalakshmi, T. Gomathi, S. Latha, T. Hajeeth, and P. Sudha, Removal of copper (II) from aqueous solution using nanochitosan/sodium alginate/microcrystalline cellulose beads, Int. J. Biol. Macromol, vol.82, pp.440-452, 2016.

F. Vilarinho, A. Sanches-silva, M. F. Vaz, and J. P. Farinha, Nanocellulose in green food packaging, Crit. Rev. Food Sci. Nutr, vol.58, pp.1526-1537, 2018.

S. Vineeth, R. V. Gadhave, and P. T. Gadekar, Chemical modification of nanocellulose in wood adhesive, Open J. Polym. Chem, vol.9, p.86, 2019.

W. Wan, H. Ouyang, W. Long, W. Yan, M. He et al., Direct surface functionalization of cellulose nanocrystals with hyperbranched polymers through the anionic polymerization for phresponsive intracellular drug delivery, ACS Sustain. Chem. Eng, vol.7, pp.19202-19212, 2019.

H. Wang, M. Pudukudy, Y. Ni, Y. Zhi, H. Zhang et al., Synthesis of nanocrystalline cellulose via ammonium persulfate-assisted swelling followed by oxidation and their chiral self-assembly, Cellulose, vol.27, pp.657-676, 2019.

R. Wang, S. Guan, A. Sato, X. Wang, Z. Wang et al., Nanofibrous microfiltration membranes capable of removing bacteria, viruses and heavy metal ions, J. Membr. Sci, vol.446, pp.376-382, 2013.

S. Wang, A. Lu, and L. Zhang, Recent advances in regenerated cellulose materials, Prog. Polym. Sci, vol.53, pp.169-206, 2016.

W. Wang, Z. Yu, F. K. Alsammarraie, F. Kong, M. Lin et al., Properties and antimicrobial activity of polyvinyl alcohol-modified bacterial nanocellulose packaging films incorporated with silver nanoparticles, Food Hydrocoll, vol.100, p.105411, 2020.

X. Wang, C. Yao, F. Wang, L. , and Z. , Cellulose-based nanomaterials for energy applications, Small, vol.13, p.1702240, 2017.

Z. Wang, P. Tammela, M. Strømme, and L. Nyholm, Cellulose-based supercapacitors: material and performance considerations, Adv. Energy Mater, vol.7, p.1700130, 2017.

E. Y. Wardhono, H. Wahyudi, S. Agustina, F. Oudet, M. P. Pinem et al., Ultrasonic irradiation coupled with microwave treatment for eco-friendly process of isolating bacterial cellulose nanocrystals, Nanomaterials, vol.8, p.859, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02192627

J. Wei, Z. Yang, Y. Sun, C. Wang, J. Fan et al., Nanocellulosebased magnetic hybrid aerogel for adsorption of heavy metal ions from water, J. Mater. Sci, vol.54, pp.6709-6718, 2019.

L. Wei, U. P. Agarwal, K. C. Hirth, L. M. Matuana, R. C. Sabo et al., Chemical modification of nanocellulose with canola oil fatty acid methyl ester, Carbohyd. Polym, vol.169, pp.108-116, 2017.

X. Wei, T. Huang, J. Nie, J. Yang, X. Qi et al., , 2018.

, Bio-inspired functionalization of microcrystalline cellulose aerogel with high adsorption performance toward dyes, Carbohyd. Polym, vol.198, pp.546-555

A. Werner, V. Schmitt, G. Sèbe, and V. Héroguez, Synthesis of surfactantfree micro-and nanolatexes from Pickering emulsions stabilized by acetylated cellulose nanocrystals, Polym. Chem, vol.8, pp.6064-6072, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01615150

A. Werner, V. Schmitt, G. Sébe, and V. Hèroguez, Convenient synthesis of hybrid polymer materials by AGET-ATRP polymerization of Pickering emulsions stabilized by cellulose nanocrystals grafted with reactive moieties, Biomacromolecules, vol.20, pp.490-501, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01990004

A. Werner, G. Sèbe, and V. Héroguez, A new strategy to elaborate polymer composites via Pickering emulsion polymerization of a wide range of monomers, Polym. Chem, vol.9, pp.5043-5050, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01913239

J. L. Wertz, J. P. Mercier, and O. Bédué, Cellulose Science and Technology, 2010.

S. Wohlhauser, G. Delepierre, M. Labet, G. Morandi, W. Thielemans et al., Grafting polymers from cellulose nanocrystals: synthesis, properties, and applications, Macromolecules, vol.51, pp.6157-6189, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02353644

X. Wu, J. Xiong, Z. Huang, S. Cao, M. Zong et al., Improving biocatalysis of cefaclor with penicillin acylase immobilized on magnetic nanocrystalline cellulose in deep eutectic solvent based co-solvent, Bioresour. Technol, vol.288, p.121548, 2019.

W. Xiang, N. Preisig, A. Ketola, B. L. Tardy, L. Bai et al., How cellulose nanofibrils affect bulk, surface, and foam properties of anionic surfactant solutions, Biomacromolecules, vol.20, pp.4361-4369, 2019.

H. Xie, H. Du, X. Yang, S. , and C. , Recent strategies in preparation of cellulose nanocrystals and cellulose nanofibrils derived from raw cellulose materials, Int. J. Polym. Sci, vol.2018, pp.1-25, 2018.

Q. Xu, Y. Ji, Q. Sun, Y. Fu, Y. Xu et al., Fabrication of cellulose nanocrystal/chitosan hydrogel for controlled drug release, Nanomaterials, vol.9, p.253, 2019.

Q. Xu, Y. Wang, L. Jin, Y. Wang, and M. Qin, Pb (II) and Cr (VI) from aqueous solutions using black wattle tannin-immobilized nanocellulose, Adsorption of Cu (II), vol.339, pp.91-99, 2017.

Y. Xu, A. Atrens, and J. R. Stokes, A review of nanocrystalline cellulose suspensions: rheology, liquid crystal ordering and colloidal phase behaviour, Adv. Colloid Interfac. Sci, vol.275, p.102076, 2019.

M. Yahya, Y. W. Chen, H. V. Lee, and W. H. Hassan, Reuse of selected lignocellulosic and processed biomasses as sustainable sources for the fabrication of nanocellulose via Ni (II)-catalyzed hydrolysis approach: a comparative study, J. Polym. Environ, vol.26, pp.2825-2844, 2018.

M. Yan, W. Jiao, G. Ding, Z. Chu, Y. Huang et al., High strength and toughness epoxy nanocomposites reinforced with graphene oxide-nanocellulose micro/nanoscale structures, Appl. Surf. Sci, vol.497, p.143802, 2019.

X. Yang, F. Han, C. Xu, S. Jiang, L. Huang et al., Effects of preparation methods on the morphology and properties of nanocellulose (NC) extracted from corn husk, Ind. Crop. Prod, vol.109, pp.241-247, 2017.

D. H. Yanto, S. Tachibana, and K. Itoh, Biodecolorization and biodegradation of textile dyes by the newly isolated saline-pH tolerant fungus Pestalotiopsis sp, J. Environ. Sci. Technol, vol.7, pp.44-55, 2014.

F. Yin, L. Lin, and S. Zhan, Preparation and properties of cellulose nanocrystals, gelatin, hyaluronic acid composite hydrogel as wound dressing, J. Biomater. Sci. Polym. Ed, vol.30, pp.190-201, 2019.

M. Younas, A. Noreen, A. Sharif, A. Majeed, A. Hassan et al., A review on versatile applications of blends and composites of CNC with natural and synthetic polymers with mathematical modeling, Int. J. Biol. Macromol, vol.124, pp.591-626, 2019.

H. Yu, S. Y. Abdalkarim, H. Zhang, C. Wang, and K. C. Tam, Simple process to produce high-yield cellulose nanocrystals using recyclable citric/hydrochloric acids, ACS Sustain. Chem. Eng, vol.7, pp.4912-4923, 2019.

X. Yu, S. Tong, M. Ge, L. Wu, J. Zuo et al., Adsorption of heavy metal ions from aqueous solution by carboxylated cellulose nanocrystals, Int. J. Environ. Sci, vol.25, pp.933-943, 2013.

L. Yue, F. Liu, S. Mekala, A. Patel, R. A. Gross et al., High performance biobased epoxy nanocomposite reinforced with a bacterial cellulose nanofiber network, ACS Sustain. Chem. Eng, vol.7, pp.5986-5992, 2019.

L. Yue, A. Maiorana, F. Khelifa, A. Patel, J. M. Raquez et al., Surface-modified cellulose nanocrystals for biobased epoxy nanocomposites, Polymer, vol.134, pp.155-162, 2018.

H. Zhang, Y. She, S. Song, Q. Lang, and J. Pu, Particulate reinforcement and formaldehyde adsorption of modified nanocrystalline cellulose in urea-formaldehyde resin adhesive, J. Adhes. Sci. Technol, vol.27, pp.1023-1031, 2013.

Q. Zhang, L. Zhang, W. Wu, X. , and H. , Methods and applications of nanocellulose loaded with inorganic nanomaterials: a review, Carbohyd. Polym, vol.229, p.115454, 2020.

R. Zhang and Y. Liu, High energy oxidation and organosolv solubilization for high yield isolation of cellulose nanocrystals (CNC) from Eucalyptus hardwood, Sci. Rep, vol.8, p.16505, 2018.

S. Zhang, G. Sun, Y. He, R. Fu, Y. Gu et al., Preparation, characterization, and electrochromic properties of nanocellulose-based polyaniline nanocomposite films, ACS Appl. Mater. Interfaces, vol.9, pp.16426-16434, 2017.

C. Zhao, Q. Shao, and S. P. Chundawat, Recent advances on ammoniabased pretreatments of lignocellulosic biomass, Bioresour. Technol, vol.298, p.122446, 2020.

Y. Zhao, L. , and J. , Excellent chemical and material cellulose from tunicates: diversity in cellulose production yield and chemical and morphological structures from different tunicate species, Cellulose, vol.21, pp.3427-3441, 2014.