G. Hasson, J. Boos, I. Herbeuval, M. Biscondi, and C. Goux, Theoretical and experimental determinations of grain boundary structures and energies: Correlation with various experimental results, Surface Science, vol.31, pp.115-137, 1972.

D. Wolf and M. Kluge, Relationship between shear resistance and local atomic structure at grain boundaries in FCC metals, Scripta Materialia, vol.24, pp.907-914, 1990.

M. Tschopp, G. Tucker, and D. Mcdowell, Structure and Free Volume of <110> Symmetric Tilt Grain Boundaries with the E Structural Unit, Acta Materialia, vol.55, pp.3959-3969, 2007.

K. S. Kumar, H. V. Swygenhoven, and S. Suresh, Mechanical Behavior of Nanocrystalline Metals and Alloys, Acta Materialia, vol.51, pp.5743-5774, 2003.

M. Dao, L. Lu, R. J. Asaro, J. T. Hosson, and E. Ma, Toward a Quantitative Understanding of Mechanical Behavior of Nanocrystalline metals, Acta Materialia, vol.55, pp.4041-4065, 2007.

E. O. Hall, The Deformation and Ageing of Mild Steel: III Discussion of Results, Proceedings of the Physical Society B, vol.64, pp.747-753, 1951.

N. J. Petch, The cleavage strength of polycrystals, Journal of the Iron and Steel Institute, vol.174, pp.25-28, 1953.

A. S. Khan, J. Liu, J. W. Yoon, and R. Nambori, Strain rate effect of high purity aluminum single crystals: Experiments and simulations, International Journal of Plasticity, vol.67, pp.39-52, 2015.

J. Liu, A. S. Khan, L. Takacs, and C. S. Meredith, Mechanical behavior of ultrafine-grained/nanocrystalline titanium synthesized by mechanical milling plus consolidation: Experiments, modeling and simulation, International Journal of Plasticity, vol.64, pp.151-163, 2015.

J. Schiøtz and K. W. Jacobsen, A Maximum in the Strength of Nanocrystalline Copper, Science, vol.301, pp.1357-1359, 2003.

K. J. Vliet, S. Tsikata, and S. Suresh, Model Experiments for direct Visualization of Grain Boundary Deformation in Nanocrystalline Metals, Applied Physics Letters, vol.83, pp.1441-1443, 2003.

C. A. Schuh, T. G. Nieh, and T. Yamasaki, Hall-Petch Breakdown Manifested in Abrasive Wear Resistance of Nanocrystalline Nickel, Scripta Materialia, vol.46, pp.735-740, 2002.

J. Carsley, J. Ning, W. Milligan, S. Hackney, and E. Aifantis, A simple, mixture-based model for the grain-size dependence of strength in nanophase metals, Nanostructured Materials, vol.5, pp.441-448, 1995.

D. Konstantinidis and E. Aifantis, On the anomalous hardness of nanocrystalline materials, Nanostructured Materials, vol.10, pp.1111-1118, 1998.

H. Kim, Y. Estrin, and M. Bush, Plastic deformation behavior of fine grained materials, Acta Materialia, vol.48, pp.493-504, 2000.

H. Fu, D. Benson, and M. Meyers, Analytical and computational description of effect of grain size on yield stress of metals, Acta Materialia, vol.49, pp.2567-2582, 2001.

D. Benson, H. Fu, and M. Meyers, On the effect of grain size on yield stress: extension into nanocrystalline domain, Materials Science and Engineer, pp.854-861, 2001.

H. Fu, D. Benson, and M. Meyers, Computational description of nanocrystalline deformation based on crystal plasticity, Acta Materialia, vol.52, pp.4413-4425, 2004.

H. Kim and Y. Estrin, Phase mixture modelling of the strain rate dependent mechanical behavior of nanostructured materials, Acta Materialia, vol.53, pp.765-772, 2005.

L. Capolungo, M. Cherkaoui, and J. Qu, A self-consistent model for the inelastic deformation of nanocrystalline materials, Journal of Engineering Materials and Technology -Transactions of the ASME, vol.127, pp.400-407, 2005.

L. Capolungo, C. Jochum, M. Cherkaoui, and J. Qu, Homogenization method for strength and inelastic behavior of nanocrystalline materials, International Journal of Plasticity, vol.21, pp.67-82, 2005.

Y. Wei and L. Anand, Grain-boundary sliding and separation in polycrystalline metals: application to nanocrystalline fcc metals, Journal of the Mechanics and Physics of Solids, vol.52, pp.2587-2616, 2004.

B. Zhu, R. Asaro, P. Krysl, and R. Bailey, Transition of deformation mechanisms and its connection to grain size distribution in nanocrystalline metals, Acta Materialia, vol.53, pp.4825-4838, 2005.

Y. Wei and H. Gao, An elastic-viscoplastic model of deformation in nanocrystalline metals based on coupled mechanisms in grain boundaries and grain interiors, Materials Science and Engineering: A, vol.478, pp.16-25, 2008.

B. Jiang and G. Weng, A generalized self-consistent polycrystal model for the yield strength of nanocrystalline materials, Journal of the Mechanics and Physics of Solids, vol.52, pp.1125-1149, 2004.

R. Lebensohn, E. Bringa, and A. Caro, A viscoplastic micromechanical model for the yield strength of nanocrystalline materials, Acta Materialia, vol.55, pp.261-271, 2007.

K. Aifantis and J. Willis, The role of interfaces in enhancing the yield strength of composites and polycrystals, Journal of the Mechanics and Physics of Solids, vol.53, pp.1047-1070, 2005.

M. E. Gurtin, A finite-deformation, gradient theory of single-crystal plasticity with free energy dependent on densities of geometrically necessary dislocations, International Journal of Plasticity, vol.24, pp.702-725, 2008.

K. Aifantis and A. Konstantinidis, Hall-Petch revisited at the nanoscale, Materials Science and Engineering: B, vol.163, pp.139-144, 2009.

K. Aifantis, On the gradient approach -Relation to Eringen's nonlocal theory, International Journal of Engineering Science, vol.49, pp.1367-1377, 2011.

H. Kim and S. Oh, An interfacial energy incorporated couple stress crystal plasticity and the finite element simulation of grain subdivision, Journal of the Mechanics and Physics of Solids, vol.60, pp.1815-1841, 2012.

G. Z. Voyiadjis, D. Faghihi, and Y. Zhang, A theory for grain boundaries with strain-gradient plasticity, International Journal of Solids and Structures, vol.51, pp.1872-1889, 2014.

Y. Aoyagi, T. Tsuru, and T. Shimokawa, Crystal plasticity modeling and simulation considering the behavior of the dislocation source of ultrafinegrained metal, International Journal of Plasticity, vol.55, pp.43-57, 2014.

P. Van-beers, V. Kouznetsova, M. Geers, M. Tschopp, and D. Mcdowell, A multiscale model of grain boundary structure and energy: From atomistics to a continuum description, Acta Materialia, vol.82, pp.513-529, 2015.

P. Van-beers, V. Kouznetsova, and M. Geers, Grain boundary interfacial plasticity with incorporation of internal structure and energy, Mechanics of Materials doi

H. Rösner, C. Kübel, Y. Ivanisenko, L. Kurmanaeva, S. V. Divinski et al., Strain mapping of a triple junction in nanocrystalline Pd, Acta Materialia, vol.59, pp.7380-7387, 2011.

F. Di-gioacchino and J. Quinta-da-fonseca, An experimental study of the polycrystalline plasticity of austenitic stainless steel, International Journal of Plasticity, vol.74, pp.92-109, 2015.

J. L. Carter, J. M. Sosa, P. A. Shade, H. L. Fraser, M. D. Uchic et al., The potential link between high angle grain boundary morphology and grain boundary deformation in a nickel-based superalloy, Materials Science and Engineering A, vol.640, pp.280-286, 2015.

C. Fressengeas, V. Taupin, M. Upadhyay, and L. Capolungo, Tangential Continuity of Elastic/Plastic Curvature and Strain at Interfaces, International Journal of Solids and Structures, vol.49, pp.2660-2667, 2012.

M. Upadhyay, L. Capolungo, V. Taupin, and C. Fressengeas, Grain boundary and triple junction energies in crystalline media: A disclination based approach, International Journal of Solids and Structures, vol.48, pp.3176-3193, 2011.

V. Taupin, L. Capolungo, C. Fressengeas, A. Das, and M. Upadhyay, Grain Boundary Modeling using an Elasto-Plastic Theory of Dislocation and Disclination Fields, Journal of the Mechanics and Physics of Solids, vol.61, pp.370-384, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01501431

C. Fressengeas, V. Taupin, and L. Capolungo, Continuous Modeling of the Structure of Symmetric Tilt Boundaries, vol.51, pp.1434-1441, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01503446

V. Taupin, L. Capolungo, and C. Fressengeas, Disclination Mediated Plasticity in Shear-Coupled Boundary Migration, International Journal of Plasticity, vol.53, pp.179-192, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01503714

V. Taupin, L. Capolungo, C. Fressengeas, M. V. Upadhyay, and B. Beausir, A mesoscopic theory of dislocation and disclination fields for grainboundary mediated crystal plasticity, International Journal of Solids and Structures, vol.71, pp.277-290, 2015.

H. Moulinec and P. Suquet, A Fast Numerical Method for Computing the Linear and Nonlinear Properties of Composites, Comptes Rendus de l'Académie des, Sciences Paris II, vol.318, pp.1417-1423, 1994.

H. Moulinec and P. Suquet, A Numerical Method for Computing the Overall Response of Nonlinear Composites with Complex Microstructure, Computer Methods in Applied Mechanics and Engineering, vol.157, pp.69-94, 1998.
URL : https://hal.archives-ouvertes.fr/hal-01282728

R. Lebensohn, N-site Modeling of a 3D Viscoplastic Polycrystal using Fast Fourier Transform, Acta Materialia, vol.49, pp.2723-2737, 2001.

R. Lebensohn, A. Kanjarla, and P. Eisenlohr, An Elasto-viscoplastic Formulation based on Fast Fourier Transforms for the Prediction of Micromechanical Fields in Polycrystalline materials, International Journal of Plasticity, pp.59-69, 2012.

R. Dewit, Fundamental Aspects of Dislocation Theory, vol.1, pp.651-680, 1970.

R. Dewit, Theory of Disclinations: II. Continuous and Discrete Disclinations in Anisotropic Elasticity, vol.77, pp.49-100, 1973.

R. Dewit, Theory of Disclinations: III. Continuous and Discrete Disclinations in Isotropic Elasticity, vol.77, pp.359-368, 1973.

R. Dewit, Theory of Disclinations: IV. Straight Disclinations, vol.77, pp.607-658, 1973.

J. Nye, Some Geometrical Relations in Dislocated Crystals, Acta Metallurgica, vol.1, pp.153-162, 1953.

R. D. Mindlin and H. F. Tiersten, Effects of couple stresses in linear elasticity, Archive for rational mechanics and analysis, vol.11, pp.415-448, 1962.

M. V. Upadhyay, L. Capolungo, V. Taupin, and C. Fressengeas, Elastic Constitutive Laws for Incompatible Crystalline Media: the Contributions of Dislocations, Disclinations and G-disclinations, vol.93, pp.794-832, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01501433

R. A. Toupin, Elatic materials with couple stresses, Archive for rational mechanics and analysis, vol.11, pp.385-414, 1962.

E. Kröner, On the physical reality of torque stresses in continuum mechanics, International Journal of Engineering Science, vol.1, pp.261-278, 1963.

R. Maranganti and P. Sharma, A Novel Atomistic Approach to Determine Strain-Gradient Elasticity Constants: Tabulation and Comparison for Various Metals, Semiconductors, Silica, Polymers and the (ir) Relevance for Nanotechnologies, Journal of the Mechanics and Physics of Solids, vol.55, pp.1823-1852, 2007.

D. Seif, G. Po, M. Mrovec, M. Lazar, C. Elsässer et al., Atomistically enabled nonsingular anisotropic elastic representation of near-core dislocation stress fields in ?-iron, Physical Review B, vol.91, p.184102, 2015.

C. Fressengeas, V. Taupin, and L. Capolungo, An elasto-plastic theory of dislocation and disclination fields, International Journal of Solids and Structures, vol.48, pp.3499-3509, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01501431

S. Forest, G. Cailletaud, and R. Sievert, A Cosserat theory for elastoviscoplastic single crystals at finite deformation, Archives of Mechanics, vol.4, pp.705-736, 1997.

J. Mayeur, D. L. Mcdowell, and D. J. Bammann, Dislocation-based micropolar single crystal plasticity: Comparison of multi-and single criterion theories, Journal of the Mechanics and Physics of Solids, vol.59, pp.398-422, 2011.

J. Michel, H. Moulinec, and P. Suquet, A Computational Method based on Augmented Lagrangians and Fast Fourier Transforms for Composites with High Contrast, Computer Modelling in Engineering & Sciences, vol.1, pp.79-88, 2000.

J. Michel, H. Moulinec, and P. Suquet, A Computational Scheme for Linear and Non-Linear Composites with Arbitrary Phase Contrast, International Journal for Numerical Methods in Engineering, vol.52, pp.139-160, 2001.

L. Dellinger, D. Vasicek, and C. Sondergeld, Kelvin Notation for Stabilizing Elastic Constant Inversion, Revue de l'Institute Francaise de Petrol, vol.53, pp.709-719, 1998.

W. Müller, Fourier transforms and their application to the formation of textures and changes of morphology in solids, IUTAM Symposium on Transformation Problems in Composite and Active Materials, pp.61-72, 1998.

W. Press, S. Teukolsky, W. Vetterling, and B. Flannery, Numerical recipies in C++, 2002.

S. Berbenni, V. Taupin, K. Djaka, and C. Fressengeas, A Numerical Spectral Approach for Solving Elasto-Static Field Dislocation and G-Disclination Mechanics, International Journal of Solids and Structures, vol.51, pp.4157-4175, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01515210

R. A. Lebensohn and A. Needleman, Numerical implementation of nonlocal polycrystal plasticity using Fast Fourier Transforms, Journal of the Mechanics and Physics of Solids Submitted

W. Pantleon, Resolving the geometrically necessary dislocation content by conventional electron backscattering diffraction, Scripta Materialia, vol.58, pp.994-997, 2008.

B. Beausir and C. Fressengeas, Disclination Densities from EBSD Orientation Mapping, International Journal of Solids and Structures, vol.50, pp.137-146, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01500811

C. Landon, B. Adams, and J. Kacher, High-Resolution Methods for Characterizing Mesoscale Dislocation Structures, Journal of Engineering Materials and Technology, vol.130, p.21004, 2008.

S. Birosca, F. D. Gioacchino, S. Stekovic, and M. Hardy, A quantitative approach to study the effect of local texture and heterogeneous plastic strain on the deformation micromechanism in RR1000 nickel-based superalloy, Acta Materialia, vol.74, pp.110-124, 2014.

E. Rauch and M. Véron, Automated crystal orientation and phase mapping in TEM, Materials Characterization, vol.98, pp.1-9, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01121290

G. Simmons and H. Wang, Single Crystal Elastic Constants and Calculated Aggregate Properties: A Handbook, 1971.

L. Li, P. Anderson, M. Lee, E. Bitzek, P. Derlet et al., Van Swygenhoven, The stress-strain response of nanocrystalline metals: a quantized crystal plasticity approach, Acta Materialia, vol.57, pp.812-822, 2009.

S. Van-petegem, L. Li, P. Anderson, and H. Van-swygenhoven, Deformation mechanisms in nanocrystalline materials: Insights from in-situ diffraction and crystal plasticity modeling, Thin Solid Films, vol.530, pp.20-24, 2013.

E. Bringa, A. Caro, Y. Wang, M. Victoria, J. Mcnaney et al., Ultrahigh strength in nanocrystalline materials under shock loading, Science, vol.309, pp.1838-1841, 2005.

F. C. Frank, The Resultant Content of Dislocations in an Arbitrary Intercrystalline Boundary, in: Symposium on The Plastic Deformation of Crystalline Solids, p.150, 1950.

B. Bilby, R. Bullough, and E. Smith, Continuous Distributions of Dislocations: A new Application of the Methods of Non-Riemannian Geometry, vol.231, pp.263-273, 1955.

J. C. Li, Disclination Model of High Angle Grain Boundaries, vol.31, pp.12-26, 1972.

S. Forest and D. K. Trinh, Generalized continua and non-homogeneous boundary conditions in homogenization methods, Zeitschrift für Angewandte Mathematik und Mechanik, vol.91, pp.90-109, 2011.

M. Murayama, J. M. Howe, H. Hidaka, and S. Takaki, Atomic-Level Observation of Disclination Dipoles in Mechanically Milled Nanocrystalline Fe, Science, vol.295, pp.2433-2435, 2002.

A. Acharya and J. Bassani, Incompatibility and Crystal Plasticity, Journal of the Mechanics and Physics of Solids, vol.48, pp.1565-1595, 2000.

S. Forest, F. Barbe, and G. Cailletaud, Cosserat modelling of size effects in the mechanical behavior of polycrystals and multi-phase materials, International Journal of Solids and Structures, vol.37, pp.7105-7126, 2000.

M. E. Gurtin, A Gradient Theory of Single Crystal Viscoplasticity that Accounts for Geometrically Necessary Dislocations, Journal of the Mechanics and Physics of Solids, vol.50, pp.5-32, 2002.

J. Clayton, D. L. Mcdowell, and D. J. Bammann, Modeling dislocations and disclinations with finite micropolar elasticity, International Journal of Plasticity, vol.22, pp.210-256, 2006.

A. Ma, F. Roters, and D. Raabe, On the consideration of interactions between dislocations and grain boundaries in crystal plasticity finite element modeling theory, experiments, and simulations, Acta Materialia, vol.54, pp.2181-2194, 2006.

J. Gerken, Formulation and solution of a crystal plasticity constitutive model with slip gradient effects, 2007.

A. Acharya and F. Fressengeas, Coupled phase transformations and plasticity as a field theory of deformation incompatibility, vol.174, pp.87-94, 2012.

R. Desmorat, Décomposition de Kelvin et concept de contraintes effectives multiples pour les matériaux anisotropes, Comptes Rendus Mécanique, vol.337, pp.733-738, 2009.

R. Marull and R. Desmorat, Kelvin Modes Based Cubic Plasticity and Induced Anisotropic Damage: Application to Creep of AM1 Single Crystal, Advanced Materials Modelling for Structures, vol.19, pp.217-227, 2013.

W. H. Press, S. A. Teukolsky, W. T. Vetterling, and B. P. Flannery, The Art of Scientific Computing, vol.77, 1997.

M. V. Upadhyay, On the role of defect incompatibilities on mechanical properties of polycrystalline aggregates: a multi-scale study, PhD dissertation, 2014.