A. Arias, J. A. Rodríguez-martínez, and A. Rusinek, Numerical simulations of impact behaviour of thin steel plates subjected to cylindrical, conical and hemispherical non-deformable projectiles, Eng. Fract. Mech, vol.75, pp.1635-1656, 2008.

R. W. Armstrong and F. J. Zerilli, DISLOCATION MECHANICS BASED ANALYSIS OF MATERIAL DYNAMICS BEHAVIOR, J. Phys. Colloques, vol.49, 1988.
URL : https://hal.archives-ouvertes.fr/jpa-00227797

Y. Bai and T. Wierzbicki, A new model of metal plasticity and fracture with pressure and Lode dependence, Int. J. Plast, vol.24, pp.1071-1096, 2008.

Y. Bao and T. Wierzbicki, On fracture locus in the equivalent strain and stress triaxiality space, Int. J. Mech. Sci, vol.46, pp.81-98, 2004.

A. S. Bonnet-lebouvier and J. R. Klepaczko, Numerical study of shear deformation in Ti-6Al-4V at medium and high strain rates, critical impact velocity in shear, Int. J. Impact Eng, vol.27, pp.10-16, 2002.

T. Børvik, O. S. Hopperstad, T. Berstad, and M. Langseth, Perforation of 12mm thick steel plates by 20mm diameter projectiles with flat, hemispherical and conical noses: Part II: numerical simulations, Int. J. Impact Eng, vol.27, pp.37-64, 2002.

T. Børvik, M. Langseth, O. S. Hopperstad, and K. A. Malo, Perforation of 12mm thick steel plates by 20mm diameter projectiles with flat, hemispherical and conical noses: Part I: experimental study, Int. J. Impact Eng, vol.27, pp.34-37, 2002.

C. A. Bronkhorst, E. K. Cerreta, Q. Xue, P. J. Maudlin, T. A. Mason et al., An experimental and numerical study of the localization behavior of tantalum and stainless steel, Int. J. Plast, vol.22, pp.1304-1335, 2006.

J. D. Campbell and W. G. Ferguson, The temperature and strain-rate dependence of the shear strength of mild steel, Philos. Mag. J. Theor. Experim. Appl. Phys, vol.21, pp.63-82, 1970.

Y. Chen, A. H. Clausen, O. S. Hopperstad, and M. Langseth, Stress-strain behaviour of aluminium alloys at a wide range of strain rates, Int. J. Solids Struct, vol.46, pp.3825-3835, 2009.

C. Chree, The equations of an isotropic elastic solid in polar and cylindrical co-ordinates their solution and application, Trans. Cambridge Philos. Soc, vol.14, p.250

A. Dorogoy and D. Rittel, Dynamic large strain characterization of tantalum using shear-compression and shear-tension testing, Mech. Mater, vol.112, pp.143-153, 2017.

A. Dorogoy, D. Rittel, and A. Godinger, A shear-tension specimen for large strain testing, Exp. Mech, vol.56, pp.437-449, 2016.

A. Dorogoy, D. Rittel, and A. Godinger, Modification of the shear-compression specimen for large strain testing, Exp. Mech, vol.55, pp.1627-1639, 2015.

Q. Duan, T. Jin, S. Chen, and X. Shu, Mechanical analysis of PA66 under combined shear-compression, Appl. Phys. A, vol.123, p.365, 2017.

J. Duffy, J. D. Campbell, and R. H. Hawley, On the use of a torsional split hopkinson bar to study rate effects in 1100-0 aluminum, J. Appl. Mech, vol.38, pp.83-91, 1971.

M. Dunand and D. Mohr, Predicting the rate-dependent loading paths to fracture in advanced high strength steels using an extended mechanical threshold model, Honour of the Editor-in-Chief, Professor Magnus Langseth, on his 65th Birthday, vol.108, pp.272-285, 2017.

B. Farrokh and A. S. Khan, Grain size, strain rate, and temperature dependence of flow stress in ultra-fine grained and nanocrystalline Cu and Al: synthesis, experiment, and constitutive modeling, Int. J. Plast, vol.25, pp.715-732, 2009.

C. Francart, Y. Demarty, N. Bahlouli, and S. Ahzi, Dynamic Characterization and Modeling of Ductile Failure of Sintered Aluminum Alloy through Shearcompression Tests, Procedia Engineering, DYMAT 23rd Technical Meeting -International Conference on Dy.namic Fracture of Ductile Materials, vol.197, pp.69-78, 2017.

H. Fransplass, M. Langseth, and O. S. Hopperstad, Experimental and numerical study of threaded steel fasteners under combined tension and shear at elevated loading rates, Int. J. Impact Eng, vol.76, pp.118-125, 2015.

T. Fras, C. C. Roth, and D. Mohr, Fracture of high-strength armor steel under impact loading, Int. J. Impact Eng, vol.111, pp.147-164, 2018.

G. T. Gray, K. S. Vecchio, and V. Livescu, Compact forced simple-shear sample for studying shear localization in materials, Acta Mater, vol.103, pp.12-22, 2016.

F. Grytten, T. Børvik, O. S. Hopperstad, and M. Langseth, Low velocity perforation of AA5083-H116 aluminium plates, Int. J. Impact Eng, vol.36, pp.597-610, 2009.

Y. Guo and Y. Li, A novel approach to testing the dynamic shear response of Ti-6Al-4V, Acta Mech. Solida Sin, vol.25, issue.12, pp.60027-60032, 2012.

J. Harding and J. Huddart, The use of the double-notch shear test in determining the mechanical properties of uranium at very high rates of strain. Mechanical properties at high rates of strain, 1979.

B. Hou, Y. Wang, T. F. Sun, J. G. Liu, and H. Zhao, On the quasi-static and impact responses of aluminum honeycomb under combined shear-compression, Int. J. Impact Eng, vol.131, pp.190-199, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02442513

B. Hou, R. Xiao, T. F. Sun, Y. Wang, J. G. Liu et al., A new testing method for the dynamic response of soft cellular materials under combined shear-compression, Int. J. Mech. Sci, vol.159, pp.306-314, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02442535

A. S. Khan and S. Huang, Experimental and theoretical study of mechanical behavior of 1100 aluminum in the strain rate range 10-5À104sÀ1, Int. J. Plast, vol.8, pp.397-424, 1992.

A. S. Khan and R. Liang, Behaviors of three BCC metal over a wide range of strain rates and temperatures: experiments and modeling, Int. J. Plast, vol.15, pp.30-33, 1999.

J. R. Klepaczko, An experimental technique for shear testing at high and very high strain rates. The case of a mild steel, Int. J. Impact Eng, vol.15, pp.80005-80008, 1994.

J. R. Klepaczko, H. V. Nguyen, and W. K. Nowacki, Quasi-static and dynamic shearing of sheet metals, Eur. J. Mech. A. Solids, vol.18, pp.80016-80019, 1999.

L. Krüger, L. W. Meyer, S. V. Razorenov, and G. I. Kanel, Investigation of dynamic flow and strength properties of Ti-6-22-22S at normal and elevated temperatures, Int. J. Impact Eng, vol.28, pp.151-154, 2003.

U. S. Lindholm, Some experiments with the split hopkinson pressure bar?, J. Mech. Phys. Solids, vol.12, pp.90028-90034, 1964.

A. Marchand and J. Duffy, An experimental study of the formation process of adiabatic shear bands in a structural steel, J. Mech. Phys. Solids, vol.36, pp.90012-90021, 1988.

R. Merle and H. Zhao, Experimental study of sheet metals under dynamic double shear at large strains, Key Eng. MaterTrans. Tech. Publ, pp.787-792, 2004.

L. W. Meyer and T. Halle, Shear strength and shear failure, overview of testing and behavior of ductile metals, vol.15, pp.327-340, 2011.

L. W. Meyer and L. Krüger, Drop-weight compression shear testing, ASM Handbook, vol.8, pp.452-454, 2000.

L. W. Meyer, E. Staskewitsch, and A. Burblies, Adiabatic shear failure under biaxial dynamic compression/ shear loading, Mech. Mater, vol.17, pp.203-214, 1994.

M. A. Meyers, K. P. Staudhammer, and L. E. Murr, Metallurgical Applications of Shock-wave and High-strain-rate Phenomena, 1986.

M. A. Meyers, Y. B. Xu, Q. Xue, M. T. Pérez-prado, and T. R. Mcnelley, Microstructural evolution in adiabatic shear localization in stainless steel, Acta Mater, vol.51, pp.526-534, 2003.

X. Nie, W. W. Chen, X. Sun, and D. W. Templeton, Dynamic failure of borosilicate glass under compression/shear loading experiments, J. Am. Ceram. Soc, vol.90, pp.2556-2562, 2007.

J. Peirs, P. Verleysen, and J. Degrieck, Novel technique for static and dynamic shear testing of Ti6Al4V sheet, Exp Mech, vol.52, pp.729-741, 2012.

J. Peirs, P. Verleysen, J. Degrieck, and F. Coghe, The use of hat-shaped specimens to study the high strain rate shear behaviour of Ti-6Al-4V, Int. J. Impact Eng. Impact Loading Lightweight Struct, vol.37, pp.703-714, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00674106

J. Peirs, P. Verleysen, W. Van-paepegem, and J. Degrieck, Determining the stressstrain behaviour at large strains from high strain rate tensile and shear experiments, Int. J. Impact Eng, vol.38, pp.406-415, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00816798

L. Pochhammer, Beitrag zur Theorie der Biegung des Kreiscylinders, Journal für die reine und angewandte Mathematik, vol.81, pp.33-61, 1876.

G. Ravichandran and G. Subhash, Critical appraisal of limiting strain rates for compression testing of ceramics in a split hopkinson pressure bar, J. Am. Ceram. Soc, vol.77, pp.263-267, 1994.

D. Rittel, S. Lee, and G. Ravichandran, A shear-compression specimen for large strain testing, Exp. Mech, vol.42, pp.58-64, 2002.

A. Rusinek and J. R. Klepaczko, Shear testing of a sheet steel at wide range of strain rates and a constitutive relation with strain-rate and temperature dependence of the flow stress, Int. J. Plast, vol.17, issue.00, pp.20-26, 2001.

F. F. Shi, R. Merle, B. Hou, J. G. Liu, Y. L. Li et al., A critical analysis of plane shear tests under quasi-static and impact loading, Advances in Impact Engineering: Selected papers from AEPA2012, vol.74, pp.107-119, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01137374

E. Voce, The relationship between stress and strain for homogeneous deformation, J. Inst. Met, vol.74, pp.537-562, 1948.

Z. Xu, X. Ding, W. Zhang, and F. Huang, A novel method in dynamic shear testing of bulk materials using the traditional SHPB technique, Int. J. Impact Eng, vol.101, pp.90-104, 2017.

Z. Xu, Y. Liu, Z. Sun, H. Hu, and F. Huang, On shear failure behaviors of an armor steel over a large range of strain rates, Int. J. Impact Eng, vol.118, pp.24-38, 2018.

F. J. Zerilli and R. W. Armstrong, The effect of dislocation drag on the stress-strain behavior of F.C.C. metals, Acta Metall. Mater, vol.40, pp.1803-1808, 1992.

T. Zhou, J. Wu, J. Che, Y. Wang, and X. Wang, Dynamic shear characteristics of titanium alloy Ti-6Al-4V at large strain rates by the split Hopkinson pressure bar test, Int. J. Impact Eng, vol.109, pp.167-177, 2017.

S. Zhu, Y. Guo, H. Chen, Y. Li, and D. Fang, Formation of adiabatic shear band within Ti-6Al-4V: Effects of stress state, Mech. Mater, vol.137, 2019.