E. Adler, Lignin chemistry?past, present and future, Wood Science and Technology, vol.17, issue.6, pp.169-218, 1977.
DOI : 10.1139/o63-009

R. Alén, R. Kotilainen, and A. Zaman, Thermochemical behavior of Norway spruce (Picea abies) at 180-225°C. Wood Science and Technology, pp.163-171, 2002.

N. Amusant, C. Moretti, B. Richard, E. Prost, J. M. Nuzillard et al., Chemical compounds from Eperua falcata and Eperua grandiflora heartwood and their biological activities against wood destroying fungus (Coriolus versicolor) Holz als Roh und Werkstoff, pp.23-28, 2007.
DOI : 10.1007/s00107-006-0120-1

F. Avat, Contribution à l'étude des traitements thermiques du bois (20-300°C): transformations chimiques et caracterisations physico-chimiques, 1993.

N. Ayadi, F. Lejeune, F. Charrier, . Charrierb, and A. Merlin, Color stability of heat treated wood during artificial weathering. Holz als Roh-und Werkstoff, pp.221-226, 2003.

B. Bakhsous, S. Dumarçay, E. Gelhaye, and P. Gérardin, Investigation of new wood preservation formulations based on synergies between antioxidant, 2-HPNO and Propiconazole, 37th Annual Meeting of the International Research Group on Wood Preservation, pp.18-22, 2006.

J. A. Baldock and R. J. Smernik, Chemical composition and bioavailability of thermally altered Pinus resinosa (Red pine) wood. Organic Geochemistry, pp.1093-1109, 2002.

M. Baya, P. Soulounganga, E. Gelhaye, and P. Gérardin, Fungicidal activity of ??-thujaplicin analogues, Pest Management Science, vol.30, issue.9, pp.833-838, 2001.
DOI : 10.1021/cr60284a002

P. Bekhta and P. Niemz, Effect of High Temperature on the Change in Color, Dimensional Stability and Mechanical Properties of Spruce Wood, Holzforschung, vol.6, issue.1, pp.539-546, 2003.
DOI : 10.1007/BF02716400

C. Bengtsson, J. Jermer, and F. Brem, Bending strength of heat-treated spruce and pine timber, 2002.

N. Bénichou and M. A. Sultan, Thermal properties of lightweight-framed construction components at elevated temperatures, Fire and Materials, vol.36, issue.3, pp.165-179, 2005.
DOI : 10.1002/fam.880

M. T. Bhuiyan, N. Hirai, and N. Sobue, Changes of crystallinity in wood cellulose by heat treatment under dried and moist conditions, Journal of Wood Science, vol.35, issue.6, pp.431-436, 2000.
DOI : 10.1002/pol.1962.1205916813

T. Bhuiyan and N. Hirai, Study of crystalline behavior of heat-treated wood cellulose during treatments in water, Journal of Wood Science, vol.51, issue.1, pp.42-47, 2005.
DOI : 10.1007/s10086-003-0615-x

M. Boonstra, B. Tjeerdsma, and H. Groeneveld, Thermal modification of nondurable wood species. 1. The Plato technology: thermal modification of wood, International Research Group Wood Pre, Section 4 -Processes. 29 Annual Meeting, 1998.

M. Boonstra and B. Tjeerdsma, Chemical analysis of heat treated softwoods. Holz als Roh-und Werkstoff, pp.204-211, 2006.

M. J. Boonstra, J. Van-acker, E. Kegel, and M. Stevens, Optimisation of a two-stage heat treatment process: durability aspects, Wood Science and Technology, vol.61, issue.3, pp.31-57, 2007.
DOI : 10.1007/978-1-4684-5670-7_41

M. Boonstra, J. Van-acker, F. Tjeerdsma, and E. Kegel, Propri??t??s m??caniques de bois r??sineux modifi??s par traitement thermique en relation avec la constitution en polym??res ligneux structuraux, Annals of Forest Science, vol.33, issue.7, pp.679-690, 2007.
DOI : 10.1021/ba-1984-0207.ch005

K. Borgin and K. Corbett, The stability and weathering properties of wood treated with various oils, Plast Paint Rubber, vol.14, issue.5, pp.69-72, 1970.

J. Bourgois and R. Guyonnet, Characterisation and analysis of torrefied wood. Wood Science and Technology, pp.143-155, 1988.

J. Bourgeois, M. C. Bartholin, and R. Guyonnet, Thermal treatment of wood: analysis of the obtained product, Wood Science and Technology, vol.155, issue.291, pp.303-310, 1989.
DOI : 10.1007/978-94-011-6017-9

C. Brischke, C. Welzbacher, K. Brandt, and A. Rapp, Quality control of thermally modified timber: Interrelationship between heat treatment intensities and CIE L*a*b* color data on homogenized wood samples, Holzforschung, vol.48, issue.1, pp.19-22, 2007.
DOI : 10.1007/s00107-004-0511-0

K. M. Bryden, K. W. Ragland, and C. J. Rutland, Modeling thermally thick pyrolysis wood, biomasse and bioenergy, pp.41-55, 2002.

A. Burmester, Investigation on the dimensional stabilization of wood, Bundesanstalt für Materialprüfung. Berlin-Dahlem, pp.50-56, 1973.

S. T. Chang, S. Y. Wang, C. L. Wu, Y. C. Su, and Y. H. Kuo, Antifungal Compounds in the Ethyl Acetate Soluble Fraction of the Extractives of Taiwania (Taiwania cryptomerioides Hayata) Heartwood, Holzforschung, vol.31, issue.2, pp.487-490, 1999.
DOI : 10.1515/hfsg.1965.19.2.57

P. Chanrion and J. Schreiber, Les différents procédés, Bois traité par haute température. Edition CTBA, 2002.

M. Chaouch, M. Pétrissans, A. Pétrissans, and P. Gérardin, Use of wood elemental composition to predict heat treatment intensity and decay resistance of different softwood and hardwood species. Polymer Degradation and Stability, pp.2255-2259, 2010.

B. Courtois, H. Sageot, and E. Heisel, Produits de traitements du bois : composition, dangers, mesures de préventions. INRS (institut national de recherche et de sécurité) ED 981, 2006.

F. Cui and A. F. Preston, Emulsion compositions for wood protection. US Patent Application, pp.57300-57301, 2006.

J. P. Delgenes, R. Moletta, and J. M. Navarro, Fermentation ofD-xylose,D-glucose,L-arabinose mixture byPichia stipitis: Effect of the oxygen transfer rate on fermentation performance, Biotechnology and Bioengineering, vol.6, issue.3, pp.398-402, 1989.
DOI : 10.1099/00221287-106-2-277

P. N. Diouf, N. Delbarre, D. Perrin, P. Gérardin, C. Rapin et al., Influence of Tropolone on Poria placenta Wood Degradation, Applied and Environmental Microbiology, vol.68, issue.9, pp.4377-4382, 2002.
DOI : 10.1128/AEM.68.9.4377-4382.2002

D. Dirol and R. Guyonnet, The Improvement of Wood Durability by Retification Process, 1993.

S. Doi, K. Hanata, E. Kamonji, and Y. Miyazaki, The international Research Group on Wood Preservation, pp.6-10, 2004.

L. Duchez and R. Guyonnet, Optimization of wood retification by fractional factorial design (in French)., Analusis, vol.26, issue.8, pp.39-44, 1998.
DOI : 10.1051/analusis:199826080039

S. Dumarçay, B. Bakhsous, E. Gelhaye, and P. Gérardin, Recherche de synergies entre chélateurs, antioxydants et biocides pour la mise au point de nouvelles formulations de préservation du bois, 6ème Colloque Sciences et Industrie du Bois. 2, 3 et 4 Novembre, pp.191-201, 2004.

W. Dwianto, F. Tanaka, M. Inoue, and M. Norimoto, Crystallinity changes of wood by heat or steam treatment. Wood research. Bull. Wood Res, pp.47-49, 1996.

K. Edvarsden and K. Sandland, Increased drying temperature-Its influence on the dimensional stability of wood. Holz als Roh und Werkstoff, pp.207-209, 1999.

A. M. Emsley and G. C. Stevens, Review : Kinetics ans mechanisms of the low temperature degradation of cellulose, Cellulose, issue.1, pp.26-56, 1994.

H. Epmeier, C. Bengtsson, and M. Westin, Effect of acetylation and heat treatment on dimensional stability and MOE of spruce timber, Proceedings for the First Conference of the European Society for Wood Mechanics, 2001.

B. Esteves, I. Domingos, and H. Pereira, Improvement of technological quality of eucalypt wood by heat treatment in air at 170-200ºC, For. Prod. J, vol.57, issue.12, pp.47-52, 2007.

B. Esteves, A. Velez-marques, I. Domingos, and H. Pereira, Influence of steam heating on the properties of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood. Wood Science and Technology, pp.193-207, 2007.

B. Esteves and H. Pereira, Qualit??tsbewertung von w??rmebehandeltem Holz mittels NIR-Spektroskopie, Holz als Roh- und Werkstoff, vol.13, issue.6, 2008.
DOI : 10.1255/jnirs.311

B. M. Esteves, I. J. Domingos, and H. M. Pereira, Pine wood modification by heat treatment in air, BioResources, vol.3, issue.1, pp.142-154, 2008.

B. Esteves, J. Graça, and H. Pereira, Extractive composition and summative chemical analysis of thermally treated eucalypt wood, Holzforschung, vol.32, issue.3, pp.344-351, 2008.
DOI : 10.1016/j.buildenv.2005.07.017

B. Esteves, A. Velez-marques, I. Domingos, and H. Pereira, Heat-induced colour changes of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood, Wood Science and Technology, vol.58, issue.7, pp.369-384, 2008.
DOI : 10.1007/s00226-007-0157-2

. European-standard, Produits de préservation du bois determination du seuil d'efficacité contre les champignons basidiomycètes lignovores cultivés sur milieu gélosé, 1979.

J. Follrich, U. Muller, and W. Gindl, Auswirkungen einer thermischen Modifikation auf die Adh??sion zwischen Fichtenholz (Picea abies Karst.) und einem Thermoplasten, Holz als Roh- und Werkstoff, vol.33, issue.5, pp.373-376, 2006.
DOI : 10.1007/s00107-006-0107-y

P. Gérardin, M. Petric, M. Pétrissans, J. J. Erhrardt, and J. Lambert, Evolution of wood surface free energy after heat treatment Polymer degradation and stability, pp.653-657, 2007.

E. Giebeler, Dimensionsstabilisierung von Holz durch eine, 1983.

. Behandlung, Holz als Roh und Werkstoff, pp.87-94

D. J. Gillham and A. D. Dodge, Chloroplast superoxide and hydrogen peroxide scavenging systems from pea leaves: Seasonal variations, Plant Science, vol.50, issue.2, pp.105-109, 1987.
DOI : 10.1016/0168-9452(87)90145-2

M. M. González-peña, M. Breese, and C. Hill, Hygroscopicity in heat-treated wood: Effect of extractives, International Conference on Environmentally Compatible Forest Products (ICECFOP), pp.22-24, 2004.

M. M. González-peña, S. F. Curling, and M. D. Hale, On the effect of heat on the chemical composition and dimensions of thermally-modifies wood. Polymer degradation and stability, pp.2184-2193, 2009.

M. M. González-peña and M. D. Hale, Rapid assessment of physical properties and chemical composition of thermally modified wood by mid-infrared spectroscopy, Wood Science and Technology, vol.13, issue.1, pp.1-20, 2009.
DOI : 10.1080/02773819308020526

N. Graf, W. Haas, and H. Böchzelt, Characterisation of gaseous emissions from a small-size iIndustrial plant for thermal wood modification by GC/MS, Abstracts of the First European Conference on Wood Modification, 2003.

N. Graf, S. Wagner, U. Begander, P. Trinkaus, and H. Boechzelt, Gaseous emissions from thermal wood modification as a source for fine chemicals recovery, 2005.

A. Granata and D. S. Argyropoulos, 2-Chloro-4,4,5,5-tetramethyl-1,3,2-dioxaphospholane, a Reagent for the Accurate Determination of the Uncondensed and Condensed Phenolic Moieties in Lignins, Journal of Agricultural and Food Chemistry, vol.43, issue.6, pp.1538-1544, 1995.
DOI : 10.1021/jf00054a023

M. Hakkou, M. Pétrissans, I. Bakali, P. Gérardin, and A. Zoulalian, Evolution of wood hydrophobic properties during heat treatment, Abstracts of the First European Conference on Wood Modification, 2003.

M. Hakkou, M. Pétrissans, A. Zoulalian, and P. Gérardin, Investigation of wood wettability changes during heat treatment on the basis of chemical analysis, Polymer Degradation and Stability, vol.89, issue.1, pp.1-5, 2005.
DOI : 10.1016/j.polymdegradstab.2004.10.017

M. Hakkou, M. Pétrissans, P. Gérardin, and A. Zoulalian, Investigations of the reasons for fungal durability of heat-treated beech wood, Polymer Degradation and Stability, vol.91, issue.2, pp.393-397, 2006.
DOI : 10.1016/j.polymdegradstab.2005.04.042

J. P. Haluk, Composition chimique du bois dans « Le bois : matériau d'ingénierie », 1994.

S. Hietala, S. Maunu, F. Sundholm, S. Jämsa, and P. Viitaniemi, Structure of Thermally Modified Wood Studied by Liquid State NMR Measurements, Holzforschung, vol.32, issue.5, pp.522-528, 2002.
DOI : 10.1021/j150567a003

C. Hill, Wood Modification, Chemical Thermal and other Processes Wiley serie in Renewable Resources, pp.99-126, 2006.

W. E. Hillis, The role of wood characteristics in high temperature drying Journal of the institute of wood science, pp.60-65, 1975.

B. Hinterstoisser, M. Schwanninger, B. Stefke, R. Stingl, and M. Patzelt, Surface analyses of chemically and thermally modified wood by FT-NIR, Abstracts of the First European Conference on Wood Modification, 2003.

K. M. Holtman, H. M. Chang, H. Jameel, and J. F. Kadla, C NMR Characterization of Milled Wood Lignins Isolated by Different Milling Techniques, Journal of Wood Chemistry and Technology, vol.4, issue.1, pp.21-34, 2006.
DOI : 10.3891/acta.chem.scand.27-0903

A. Hyvonen, P. Piltonen, and J. Niinimaki, Tall oil/water-emulsions as water repellents for scots pine sapwood. Holz als Roh-und Werkstoff, pp.68-73, 2006.

M. Inoue, M. Norimoto, M. Tanahashi, and R. Rowell, Steam or heat fixation of compressed wood. Wood Fiber Science, pp.224-235, 1993.

S. Jämsä, P. Ahola, and P. Viitaniemi, Long-term natural weathering of coated Thermowood, 2000.

S. Jämsä and P. Viitaniemi, Heat treatment of wood ? Better durability without chemicals, Proceedings of special seminar, 2001.

P. Jodin, Le bois matériau d'ingénierie. Association pour la recherche sur le bois en Lorraine, 1994.

K. Junghans and P. Niemz, Le bois traité à haute température dans la pratique. TRACES technologie du bois, pp.18-20, 2007.

D. Kamdem, A. Pizzi, and M. Triboulot, Heat-treated timber: potentially toxic byproducts presence and extent of wood cell wall degradation. Holz als Roh-und Werkstoff, pp.253-257, 2000.

D. P. Kamdem, A. Pizzi, and A. Jermannaud, Durability of heat-treated wood, Holz als Roh- und Werkstoff, vol.60, issue.1, pp.1-6, 2002.
DOI : 10.1007/s00107-001-0261-1

G. Kim, K. Yun, and J. Kim, Effect of heat treatment on the decay resistance and the bending properties of radiata pine sapwood, Material und Organismen, vol.32, issue.2, pp.101-108, 1998.

D. Kocaefe, L. Shi, J. Yang, D. Q. Zhang, and J. , Preliminary study of thermal treatment effects on mold growth of selected Quebec wood species. Forest products journal, pp.30-33, 2007.

D. Kocaefe, S. Poncsak, and Y. Boluk, Effect of thermal treatment on the chemical composition and mechanical properties of birch and aspen, Bioressource, vol.3, issue.2, pp.517-537, 2008.

F. Kollmann and A. Schneider, On the sorption behaviour of heat stabilized wood. Holz als Roh-und Werkstoff, pp.77-85, 1963.

R. C. Korosec, B. Lavric, G. Rep, F. Pohleven, and P. Bukovec, Thermogravimetry as a possible tool for determining modification degree of thermally treated Norway spruce wood. Thermal Analysis and Calorimetry, pp.189-195, 2009.

R. A. Kotilainen, T. J. Toivanen, and R. J. Alén, FTIR Monitoring of Chemical Changes in Softwood During Heating, Journal of Wood Chemistry and Technology, vol.41, issue.3, pp.307-320, 2000.
DOI : 10.1515/hfsg.1992.46.6.523

R. A. Kotilainen, R. J. Alén, and T. J. Toivanen, Chemical changes in black alder (Alnus glutinosa) and European aspen (Populus tremula) during heating at 150?220°C in a nitrogen atmosphere, Cellulose Chemistry and Technology, vol.35, pp.275-284, 2001.

R. Kotilanen, Chemical changes in wood during heating at 150-260°C, p.51, 2000.

C. A. Koufopanos, N. Papayannakos, G. Maschio, and A. Lucchesi, Modelling of the pyrolysis of biomass particles. Studies on kinetics, thermal and heat transfer effects, The Canadian Journal of Chemical Engineering, vol.6, issue.4, pp.907-915, 1991.
DOI : 10.1002/polc.5070060109

Y. Kubojima, T. Okano, and M. Ohta, Vibrational properties of Sitka spruce heat-treated in nitrogen gas, Journal of Wood Science, vol.42, issue.1, pp.73-77, 1998.
DOI : 10.1080/14786442108636264

Y. Kubojima, T. Okano, and M. Ohta, Vibrational properties of heat-treated green wood, Journal of Wood Science, vol.11, issue.1, 2000.
DOI : 10.1007/BF00521878

Y. Kubojima, T. Okano, and M. Ohta, Bending strength and toughness of heat-treated wood, Journal of Wood Science, vol.26, issue.1, pp.8-15, 2000.
DOI : 10.1007/978-3-642-87928-9

A. K. Lahiry, Decay patterns of CCB treated Eucalyptus camaldulensis Dehn and CCA treated Heritiera fomes Buch.-Ham poles, Journal of Scientific & Industrial Research, vol.57, issue.4, pp.211-214, 1998.

H. Leithoff and R. Peek, Heat treatment of bamboo. International Research Group Wood Preservation, 2001.

S. Lekounougou, M. Pétrissans, J. P. Jacquot, E. Gelhaye, and P. Gérardin, Effect of heat treatment on extracellular enzymatic activities involved in beech wood degradation by Trametes versicolor. Wood Science and Technology, pp.331-341, 2009.

J. Li-shi, D. Kocaefe, T. Amburgey, and J. Zhang, A comparative study on brown-rot fungus decay and subterranean termite resistance of thermally-modified and ACQ-C-treated wood. Holz als Roh-und Werkstoff, pp.353-358, 2007.

J. R. Loferski, Technologies for wood preservation in historic preservation. Archives and Museum Informatics, pp.273-290, 2001.

A. Mabicka, S. Dumarçay, E. Gelhaye, and P. Gérardin, Inhibition of fungal degradation of wood by 2-hydroxypyridine-N-oxide, Holzforschung, vol.18, issue.7, pp.566-568, 2004.
DOI : 10.1016/S0031-9422(02)00267-4

A. Manninnen, P. Pasanen, and J. Holopainen, Comparing the VOC emissions between air-dried and heat-treated Scots pine wood, Atmospheric Environment, vol.36, issue.11, pp.1763-1768, 2002.
DOI : 10.1016/S1352-2310(02)00152-8

V. Marchetti, Méthodologie de transformation chimique du bois: Etude des propriétés des nouveaux matériaux modifies, 1998.

F. Marias, J. R. Puiggali, and G. Flamant, Modeling for simulation of fluidized-bed incineration process, AIChE Journal, vol.68, issue.117, pp.1438-1460
DOI : 10.1002/aic.690470620

F. Mburu, S. Dumarçay, F. Huber, M. Petrissans, and P. Gérardin, Evaluation of thermally modified Grevillea robusta heartwood as an alternative to shortage of wood resource in Kenya: Characterisation of physicochemical properties and improvement of bio-resistance, Bioresource Technology, vol.98, issue.18, pp.3478-3486, 2007.
DOI : 10.1016/j.biortech.2006.11.006

A. Mcdonald, M. Fernandez, and B. Kreber, Chemical and UV-VIS spectroscopic study on kiln brown stain formation in Radiata pine, 9 th International Symposium of Wood and Pulping Chemistry, pp.1-5, 1997.

H. Mehlhorn, D. A. Cottarn, P. W. Lucas, and A. R. Burn, Induction of Ascorbate Peroxidase and Glutathione Reductase Activities by Interactions of Mixtures of Air Pollutants, Free Radical Research Communications, vol.8, issue.1-5, pp.1-5, 1987.
DOI : 10.1111/j.1469-8137.1985.tb03682.x

M. Mehrotra, P. Singh, and H. Kandpal, Near infrared spectroscopic investigation of the thermal degradation of wood, Thermochimica Acta, vol.507, issue.508, pp.507-508, 2010.
DOI : 10.1016/j.tca.2010.05.001

S. Metsä-kortelainen, T. Antikainen, and P. Viitaniemi, The water absorption of sapwood and heartwood of Scots pine and Norway spruce heat-treated at 170ºC, 190ºC, pp.210-230, 2006.

S. Metsä-kortelainen and H. Viitanen, Decay resistance of sapwood and heartwood of untreated and thermally modified Scots pine and Norway spruce compared with some other wood species, Wood Material Science and Engineering, vol.61, issue.3-4, pp.3-4, 2009.
DOI : 10.1051/forest:2003033

H. Militz, Heat treatment of wood: European Processes and their background, International Research Group Wood Pre, Section 4-Processes, pp.2-40241, 2002.

K. Mitsui, H. Takada, M. Sugiyama, and R. Hasegawa, Changes in the properties of lightirradiated wood with heat treatment: Part 1 Effect of treatment conditions on the change in color, 2001.

K. Mitsui, A. Murata, M. Kohara, and S. Tsuchikawa, Colour modification of wood by lightirradiation and heat treatment, Abstracts of the First European Conference on Wood Modification, 2003.

K. Mitsui, A. Murata, and L. Tolvaj, Changes in the properties of lightirradiated wood with heat treatment: Part 3. Monitoring by DRIFT spectroscopy. Holz als Roh-und Werkstoff, pp.164-168, 2004.

S. Mouras, P. Girard, P. Rousset, P. Permadi, D. Dirol et al., Propri???t???s physiques de bois peu durables soumis ??? un traitement de pyrolyse m???nag???e, Annals of Forest Science, vol.59, issue.3, pp.317-326, 2002.
DOI : 10.1051/forest:2002027

T. Nakano and J. Miyazaki, Surface Fractal Dimensionality and Hygroscopicity for Heated Wood, Holzforschung, vol.48, issue.3, 2003.
DOI : 10.1021/ac60122a009

N. Inari, G. Pétrissans, M. Lambert, J. Ehrhardt, J. J. Gérardin et al., XPS characterization of wood chemical composition after heat treatment. Surface and Interface Analysis, pp.1336-1342, 2006.

N. Inari, G. Mounguengui, S. Dumarcxay, S. Pétrissans, M. Gérardin et al., Evidence of char formation during heat treatment by pyrolysis. Polymer Degradation and Stabilisation, pp.997-1002, 2007.

N. Inari, G. Pétrissans, M. Pétrissans, A. Gérardin, and P. , Elemental composition of wood as a potential marker to evaluate heat treatment intensity, Polymer Degradation and Stability, vol.94, issue.3, pp.365-368, 2009.
DOI : 10.1016/j.polymdegradstab.2008.12.003

D. D. Nicholas, A. Kadir, A. D. Williams, and A. F. Preston, Water repellency of wood treated with alkylammonium compounds and chromated copper arsenate, International Research Group on Wood Preservation. Doc. No. IRG, pp.0-30231, 2000.

S. Nikolov and E. Encev, Effect of heat treatment on the sorption dynamics of Beech wood, 1967.

L. Nunes, T. Nobre, and A. Rapp, Thermally modified wood in choice tests with subterranean termites, 2004.

M. Nuopponen, T. Vuorinen, S. Jamsa, and P. Viitaniemi, Thermal Modifications in Softwood Studied by FT???IR and UV Resonance Raman Spectroscopies, Journal of Wood Chemistry and Technology, vol.50, issue.1, pp.13-26, 2004.
DOI : 10.1366/000370203321165214

D. Olson, Use of amine oxide surfactants for chemical flooding enhanced oil recovery, NTIS Report No. NIPER, p.417, 1998.
DOI : 10.2172/5586604

O. Sullivan and A. , Cellulose : the structure slowly unravels, Cellulose, pp.173-207, 1997.

N. L. Owen, W. B. Banks, and H. West, FTIR studies of the ???wood???-isocyanate reaction, Journal of Molecular Structure, vol.175, pp.289-394, 1988.
DOI : 10.1016/S0022-2860(98)80108-7

B. G. Palestis, R. Trivers, A. Burt, and R. N. Jones, The distribution of B chromosomes across species. Cytogenetic and genome research, pp.2-4, 2004.

M. Patzelt, G. Emsenhuber, and R. Stingl, Color measurement as means of quality control of thermally treated wood, Abstracts of the First European Conference on Wood Modification, 2003.

W. Paul, M. Ohlmeyer, and H. Leithoff, Thermisch modifizierte OSB-Strands durch einstufige Hitze-Vorbehandlung ??? Einfluss der Temperatur auf Masseabnahme, Hygroskopizit??t und erh??hte Pilzresistenz, Holz als Roh- und Werkstoff, vol.61, issue.11, pp.57-63, 2007.
DOI : 10.1007/BF02615890

P. Permadi, Optimisation du traitement thermique appliqué au bois d'oeuvre pour l'amélioration des propriétés des espèces non durables, 2000.

J. Peters, K. Fischer, and S. Fischer, Characterization of emissions from thermally modified wood and their reduction by chemical treatment, Bioresources, vol.3, issue.2, pp.491-502, 2008.

J. Peters, A. Pfriem, M. Horbens, S. Fischer, and A. Wagenführ, Emissions from thermally modiefied beech wood, their reduction by solvent extraction and fungicidal effect of the organic solvent extracts. Wood material science and engineering, pp.61-66, 2009.

J. Pinter, R. Agnes, S. Anna, and V. Tibor, Waterborne preservative coatings for wood, 1993.

S. Poncsak, D. Kocaefe, M. Bouazara, and A. Pichette, Effect of high temperature treatment on the mechanical properties of birch (Betula papyrifera), Wood Science and Technology, vol.15, issue.88, pp.647-668, 2006.
DOI : 10.1007/s00226-006-0082-9

S. Poncsak, D. Kocaefe, F. Simard, and A. Pichette, Evolution of Extractive Composition During Thermal Treatment of Jack Pine, Journal of Wood Chemistry and Technology, vol.37, issue.3, pp.251-264, 2009.
DOI : 10.1016/S0926-6690(03)00037-2

M. V. Ramiah, Thermogravimetric and differential thermal analysis of cellulose, hemicellulose, and lignin, Journal of Applied Polymer Science, vol.14, issue.5, pp.1323-1337, 1970.
DOI : 10.1002/app.1970.070140518

A. Rapp, Review on heat treatments of wood, COST ACTION E22-Environmental optimisation of wood protection, Proceedings of Special Seminar, 2001.

A. Rapp, C. Brischke, and C. Welzbacher, Interrelationship between the severity of heat treatments and sieve fractions after impact ball milling: a mechanical test for quality control of thermally modified wood, Holzforschung, vol.5, issue.1, pp.64-70, 2006.
DOI : 10.1021/ie50438a027

G. Reimer, Wood preservative émulsions concentrate, 1992.

A. Reiterer and G. Sinn, Fracture Behaviour of Modified Spruce Wood: A Study Using Linear and Non Linear Fracture Mechanics, Holzforschung, vol.29, issue.2, pp.191-198, 2002.
DOI : 10.1007/BF00352155

R. Rémond, Approche déterministe du séchage des avivés de résineux de fortes épaisseurs pour proposer des conduites industrielles adaptées, Thèse de l'université de Nancy 1, Spécialité: Sciences forestières et du bois, 2004.

V. Repellin and R. Guyonnet, Evaluation of heat treated beech by non-destructive testing, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00123723

V. Repellin and R. Guyonnet, Evaluation of heat-treated wood swelling by differential scanning calorimetry in relation to chemical composition, Holzforschung, vol.202, issue.23, pp.28-34, 2005.
DOI : 10.3183/NPPRJ-1999-14-02-p129-139

V. Repellin, Optimisation des parameters durée t temperature d'un traitement thermique du bois. Modification des propriétés d'usage du bois en relation avec les modifications physicochimiques et ultrastructurales occasionnées par le traitement thermique, 2006.

E. Roffael and K. Schaller, The influence of thermal treatment on cellulose. Holz als Roh-und Werkstoff, pp.275-278, 1971.

J. Ropp, M. Chaouch, and M. Pétrissans, Le traitement thermique conductif sous vide par PRODEO, IX Colloque Sciences &Industrie du Bois, 20 & 21 Novembre, 2008.

R. Rowell, Chemical modification of wood, Wood and Cellulosic Chemistry. Marcel Dekker, pp.703-756, 1991.

R. M. Rowell, Chemical Modification of Wood. Handbook of Wood Chemistry and Wood Composites, 2005.

R. Ruiz and T. Ehrman, Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography. Laboratory Analytical Procedure, LAP-002, NREL/MRI. Références 214, 1996.

H. Rusche, Thermal degradation of wood at temperatures up to 200 °C. Part I Strength properties of dried wood after heat treatment. Holz als Roh-und Werkstoff, pp.275-278, 1973.

M. Sailer, A. Rapp, and H. Leithoff, Improved resistance of Scots pine and spruce by application of an oil-heat treatment, International Research Group Wood Pre, Section 4- Processes, pp.0-40162, 2000.

A. J. Santos, Mechanical behavior of eucalyptus wood modified by heat. Wood Science and technology, pp.39-43, 2000.

T. P. Schultz, T. F. Hubbard-jr, J. Lehong, T. H. Fisher, and D. D. Nicholas, Role of stilbenes in the natural durability of wood: Fungicidal structure-activity relationships, Phytochemistry, vol.29, issue.5, pp.1501-1507, 1990.
DOI : 10.1016/0031-9422(90)80109-T

T. P. Schultz, W. B. Harms, T. H. Fisher, K. D. Mcmurtrey, J. Minn et al., Durability of Angiosperm Heartwood: The Importance of Extractives, Holzforschung, vol.29, issue.1, pp.29-34, 1995.
DOI : 10.1016/S0031-9422(00)86247-0

T. P. Schultz and J. J. Nicholos, Naturally durable heartwood: evidence for a proposed dual defensive function of the extractives, Phytochemistry, vol.54, issue.1, pp.47-52, 2000.
DOI : 10.1016/S0031-9422(99)00622-6

T. Schultz and D. Nicholas, Development of environmentally-benign wood preservatives based on the combination of organic biocides with antioxidants and metal chelators, Phytochemistry, vol.61, issue.5, pp.555-560, 2002.
DOI : 10.1016/S0031-9422(02)00267-4

M. Schwanninger, B. Hinterstoisser, N. Gierlinger, R. Wimmer, and J. Hanger, Application of Fourier transform near infrared spectroscopy (FT-NIR) to thermally modified wood. Holz als Roh-und Werkstoff, pp.62-483, 2004.

R. M. Seborg, H. Tarkow, and A. J. Stamm, Effect of heat upon dimensional stabilisation of wood, Journal of Forest Products Research Society, vol.3, pp.59-67, 1953.

. Sehistedt-persson, Colour responses to heat treatment of extractives and sap from pine and spruce, 8th International IUFRO Wood Drying Conference, pp.459-464, 2003.

W. Simpson and A. Tenwolde, Physical Properties and Moisture Relations of Wood, 2002.

H. Sivonen, S. L. Maunu, F. Sundholm, S. Jämsä, and P. Viitaniemi, Magnetic Resonance Studies of Thermally Modified Wood, Holzforschung, vol.545791, issue.6, pp.648-654, 2002.
DOI : 10.1021/ma00173a020

E. Sjöström, Wood Chemistry ? Fundamentals and Applications. 2, pp.51-108, 1993.

R. L. Smith, S. M. Cohen, J. Doull, V. J. Feron, J. I. Goodman et al., A procedients in food: essential oils. Food and Chemical Toxicology, pp.345-363, 2005.

A. Stamm, Thermal Degradation of Wood and Cellulose, Industrial & Engineering Chemistry, vol.48, issue.3, pp.413-417, 1956.
DOI : 10.1021/ie51398a022

B. Sundqvist and T. Morén, The influence of wood polymers and extractives on wood colour induced by hydrothermal treatment. Holz als Roh und Werkstoff, pp.375-376, 2002.

B. Sundqvist, Colour changes and acid formation in wood during heating, 2004.

?. ?u?ter?ic, A. Mohareb, M. Chaouch, M. Pétrissans, M. Petri? et al., Prediction of the decay resistance of heat treated wood on the basis of its elemental composition. Polymer Degradation and Stability, pp.94-97, 2010.

T. Syrjänen and E. Kangas, Heat treated timber in Finland. International Research Group Wood Pre, Section 4-Processes, pp.0-40158, 2000.

V. V. Telkki, J. Saunavaara, and . Jokisaarij, Time-of-flight remote detection MRI of thermally modified wood, Journal of Magnetic Resonance, vol.202, issue.1, pp.78-84, 2010.
DOI : 10.1016/j.jmr.2009.10.002

B. F. Tjeerdsma, M. Boonstra, A. Pizzi, P. Tekely, and H. Militz, Characterisation of the thermally modified wood: molecular reasons for wood performance improvement. Holz Roh- Werkstoff, pp.149-153, 1998.

B. Tjeerdsma, M. Stevens, and H. Militz, Durability aspects of hydrothermal, 2000.

B. F. Tjeerdsma and H. Militz, Chemical changes in hydrothermal treated wood: FTIR analysis of combined hydrothermal and dry heat treated wood. Holz als Roh-und Werkstoff, pp.102-111, 2005.

M. Troya and A. Navarrete, Study of the degradation of retified wood through ultrasonic and gravimetric techniques. International Research Group Wood Pre, Section 4-Processes, pp.94-40030, 1994.

O. Unsal and N. Ayrilmis, Variations in compression strength and surface roughness of heat-treated Turkish river red gum (Eucalyptus camaldulensis) wood, Journal of Wood Science, vol.53, issue.4, pp.405-409, 2005.
DOI : 10.1007/s10086-004-0655-x

D. L. Vander-hart and R. H. Atalla, Studies of microstructure in native celluloses using solid-state carbon-13 NMR, Macromolecules, vol.17, issue.8, pp.1465-1472, 1984.
DOI : 10.1021/ma00138a009

D. W. Van-krevelen, Graphical-statistical method for the study of structure and reaction processes of coal, Fuel, vol.29, pp.269-284, 1950.

M. Vernois, Heat treatment of wood in France-State of the art. Centre Technique du Bois et de l'Ameublement, 2000.

P. Viitaniemi, S. Jämsä, and H. Viitanen, Method for improving biodegradation resistance and dimensional stability of cellulosic products, United States Patent Nº, vol.5678324, issue.US005678324, 1997.

B. Vital, R. Lucia, R. Della, and R. Euclides, Effect of heating on some properties of Eucalyptus saligna wood, Revista-Árvore, vol.7, issue.2, pp.136-146, 1983.

L. Walker, Alkylammonium compounds as wood preservative in procceding of " wood preservation in the 90s and beyond, Proceedings No. 7308 published by the Forest Products Society, pp.220-228, 1994.

L. Walker, Waterproofing and preservative compositions for wood. US Patent, pp.833-741, 1998.

J. J. Weiland, R. Guyonnet, and R. Gilbert, Analyse de la pyrolyse menagee du bois par un couplage TG-DSC-IRTF, Journal of Thermal Analysis and Calorimetry, vol.7, issue.1, pp.265-274, 1997.
DOI : 10.1007/BF02719028

URL : https://hal.archives-ouvertes.fr/emse-00447977

J. J. Weiland and R. Guyonnet, Physicochemical study of a thermal treatment of wood, pp.195-202, 2001.

J. J. Weiland and R. Guyonnet, Study of chemical modifications and fungi degradation of thermally modified wood using DRIFT spectroscopy. Holz als Roh-und Werkstoff, pp.216-220, 2003.
URL : https://hal.archives-ouvertes.fr/emse-00449295

C. Welzbacher and O. Rapp, Comparison of thermally modified wood originating from four industrial scale processes-durability. International Research Group Wood Pre, pp.2-40229, 2002.

C. Welzbacher, C. Brischke, and A. Rapp, Influence of treatment temperature and duration on selected biological, mechanical, physical and optical properties of thermally modifies timber, 2007.

C. Welzbacher and A. Rapp, Timber of thermally modified timber from industrial-scale processes in different use classes : results from laboratory and field tests. Wood material science and engineering, pp.1-11, 2007.

H. West and W. B. Banks, Topochemistry of the Wood-Isccyanate Reaction an Analysis of Reaction Profiles, Journal of Wood Chemistry and Technology, vol.122, issue.3, pp.411-425, 1986.
DOI : 10.1021/ja01245a020

H. Wikberg and S. Maunu, Characterisation of thermally modified hard-and softwoods by 13 C CPMAS NMR. Carbohydrate Polymers, pp.461-466, 2004.

E. Windeisen, R. Fuchs, and G. Wegener, Chemical changes during the production of beech and ash thermowood, Proceedings of 9th European Workshop on Lignocellulosics and Pulp, pp.579-582, 2006.

E. Windeisen, C. Strobel, and G. Wegener, Chemical changes during the production of thermotreated beech wood. Wood Science and Technology, pp.523-536, 2007.

E. Windeisen and G. Wegener, Chemical characterization and comparison of thermally treated beech anda sh wood Advances in materials science of wood, pp.143-158, 2009.

Y. Yamada, T. Isoki, and S. Katsumi, Anticorrosive durable wood preservatives free from arsenic, chromine and organic solvents, JP, vol.10235612, p.2, 1998.

S. Yildiz, Effects of heat treatment on water repellence and anti-swelling efficiency of beech wood, International Research Group Wood Pre, Section 4-Processes, pp.2-40223, 2002.

S. Yildiz, D. Gezer, and U. Yildiz, Mechanical and chemical behaviour of spruce wood modified by heat. Building and Environment, pp.1762-1766, 2006.

A. Zaman, R. Alen, and R. Kotilainen, Heat behavior of Pinus sylvestris and Betula pendula at 200-230 ºC. Wood Fiber Science, pp.138-143, 2000.