A. Abdel-geliel, E. Badreddin, and A. Gambier, Application of model predictive control for fault tolerant system using dynamic safety margin, 2006 American Control Conference, 2006.
DOI : 10.1109/ACC.2006.1657598

B. Anderson and J. Et-moore, Optimal control -Linear quadratic methods, 1989.

D. Angeli, A. Casavola, and E. Et-mosca, Command governors for constrained nonlinear systems: direct nonlinear vs. linearization-based strategies, International Journal of Robust and Nonlinear Control, vol.9, issue.10, pp.677-699, 1999.
DOI : 10.1007/BF01211516

D. Angeli and E. Et-mosca, Command governors for constrained nonlinear systems, IEEE Transactions on Automatic Control, vol.44, issue.4, pp.816-820, 1999.
DOI : 10.1109/9.754825

URL : http://www.dsi.unifi.it/~angeli/papers/coimbra.ps

J. Aravena, K. Zhou, X. Li, and F. Et-chowdhury, FAULT TOLERANT SAFE FLIGHT CONTROLLER BANK 1, Proc. of the 6th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes (Safeprocess), pp.859-864, 2006.
DOI : 10.3182/20060829-4-CN-2909.00134

C. Aubrun, P. De-cuypere, and D. Et-sauter, Design of a supervised control system for a sludge dewatering process, Control Engineering Practice, vol.11, issue.1, pp.27-37, 2003.
DOI : 10.1016/S0967-0661(02)00083-7

C. Aubrun and C. Et-leick, SENSOR FAULT ACCOMMODATION : APPLICATION TO AN ACTIVATED SLUDGE PROCESS, IFAC World Congress, 2005.
DOI : 10.3182/20050703-6-CZ-1902.01864

H. Backstrom, Report on the usage of the generic aerodata model. Rapport technique, Saab Aircraft AB, vol.4, issue.3, 1997.

M. Basseville, Detecting changes in signals and systems???A survey, Automatica, vol.24, issue.3, pp.309-326, 1988.
DOI : 10.1016/0005-1098(88)90073-8

M. Basseville, On-board Component Fault Detection and Isolation Using the Statistical Local Approach, Automatica, vol.34, issue.11, pp.1391-1396, 1998.
DOI : 10.1016/S0005-1098(98)00086-7

URL : https://hal.archives-ouvertes.fr/inria-00073437

C. Belcastro, Application of failure detection, identification, and accommodation methods for improved aircraft safety, Proceedings of the 2001 American Control Conference. (Cat. No.01CH37148), pp.2623-2624, 2001.
DOI : 10.1109/ACC.2001.946268

A. Bemporad, Reference governor for constrained nonlinear systems, IEEE Transactions on Automatic Control, vol.43, issue.3, pp.415-419, 1998.
DOI : 10.1109/9.661611

A. Bemporad, A. Casavola, and E. Et-mosca, Nonlinear control of constrained linear systems via predictive reference management, IEEE Transactions on Automatic Control, vol.42, issue.3, pp.340-349, 1997.
DOI : 10.1109/9.557577

A. Bemporad, A. Casavola, and E. Et-mosca, A predictive reference governor for constrained control systems, Computers in Industry, vol.36, issue.1-2, pp.55-64, 1998.
DOI : 10.1016/S0166-3615(97)00098-5

A. Bemporad, M. Morari, V. Dua, and E. Et-pistikopoulos, The explicit linear quadratic regulator for constrained systems, Automatica, vol.38, issue.1, pp.3-20, 2002.
DOI : 10.1016/S0005-1098(01)00174-1

M. Blanke, C. Frei, F. Kraus, R. Patton, and M. Et-staroswiecki, What is fault-toerant control ? In Proc. of the 4th IFAC symposium on fault detection, supervision and safety for technical process, pp.14-16, 2000.

M. Blanke, R. Izadi-zamanabadi, R. Borgh, and Z. Et-lunau, Fault-tolerant control systems ??? A holistic view, Control Engineering Practice, vol.5, issue.5, pp.693-702, 1997.
DOI : 10.1016/S0967-0661(97)00051-8

M. Blanke, M. Kinnaert, J. Lunze, and M. Et-staroswiecki, Diagnosis and Fault-Tolerant Control. Control Systems Series, 2006.

M. Blanke, M. Staroswiecki, and N. Et-wu, Concepts and methods in faulttoerant control, Proc. of the 2001 American control conference, pp.2606-2620, 2001.

F. Borrelli, P. Falcone, J. Pekar, and G. Stewart, Reference governor for constrained piecewise affine systems, Journal of Process Control, vol.19, issue.8, pp.1229-1237, 2009.
DOI : 10.1016/j.jprocont.2009.06.001

B. Boussaid, C. Aubrun, and M. Et-abdelkrim, A design method for fault adaptation with actuators saturations avoidance, Proc. of the 7th Workshop on Advanced Control and Diagnosis (ACD'09), 2002.

B. Boussaid, C. Aubrun, and M. Et-abdelkrim, Fault adaptation based on reference governor, 2010 Conference on Control and Fault-Tolerant Systems (SysTol), 2010.
DOI : 10.1109/SYSTOL.2010.5675992

B. Boussaid, C. Aubrun, and M. Et-abdelkrim, Set-point reconfiguration in case of severe actuator fault, Proc. of the 8th European Workshop on Advanced Control and Diagnosis, pp.18-19, 2010.

B. Boussaid, C. Aubrun, and M. Et-abdelkrim, Active Fault Tolerant approach for wind turbines, 2011 International Conference on Communications, Computing and Control Applications (CCCA), 2005.
DOI : 10.1109/CCCA.2011.6031406

URL : https://hal.archives-ouvertes.fr/hal-00573963

B. Boussaid, C. Aubrun, and M. Et-abdelkrim, Selection index synthesis for 2-level aftc design, Proc. of the 2011 Conférence Méditerranéenne sur l'Ingénierie Sûre des Systèmes Complexes, pp.27-28, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00598072

B. Boussaid, C. Aubrun, and M. Et-abdelkrim, Set-point reconfiguration approach for the FTC of wind turbines, Proc. of the 18th IFAC World Congress, 2002.
DOI : 10.3182/20110828-6-IT-1002.03530

URL : https://hal.archives-ouvertes.fr/hal-00638190

B. Boussaid, C. Aubrun, M. Abdelkrim, . Et-ben, and M. Gayed, Performance evaluation based fault tolerant control with actuator saturation avoidance, International Journal of Applied Mathematics and Computer Science, vol.6, issue.3, 2011.
DOI : 10.1016/j.arcontrol.2008.03.008

URL : https://hal.archives-ouvertes.fr/hal-00637542

B. Boussaid, C. Aubrun, B. Gayed, K. Et-abdelkrim, and M. , FTC approach based on predictive governor, 2009 IEEE International Conference on Control and Automation, pp.2088-2093, 2009.
DOI : 10.1109/ICCA.2009.5410345

URL : https://hal.archives-ouvertes.fr/hal-00456252

A. Casavola, D. Famularo, G. Franze, and M. Et-sorbara, A fault-tolerant supervision scheme for electrical power grids, 2nd International Workshop on Networked Control Systems : Tolerant to Fault. 3.2.4, 2006.

A. Casavola, G. Franze, and R. Et-patton, Fault tolerance enhancement in distribution power grids: a voltage set-point reconfiguration approach, Proceedings of the 17th World Congress IFAC, pp.13563-13568, 2008.
DOI : 10.3182/20080706-5-KR-1001.02297

A. Casavola, G. Franze, and M. Et-sorbara, Fault tolerance enhancement in networked dynamical systems via coordination by constraints, Proc. of the European Control Conference, pp.3701-3708, 2007.

R. Bibliographiques-casavola, A. Franze, G. Et-sorbara, and M. , Reference-offset governor approach for the supervision of constrained networked dynamical systems, Proc. of the European Control Conference, pp.7-14, 2007.

A. Casavola, E. Mosca, and D. Et-angeli, Robust command governors for constrained linear systems, IEEE Transactions on Automatic Control, vol.45, issue.11, pp.2071-2077, 2000.

A. Casavola, M. Papini, and G. Et-franze, Supervision of Networked Dynamical Systems Under Coordination Constraints, IEEE Transactions on Automatic Control, vol.51, issue.3, pp.421-437, 2006.
DOI : 10.1109/TAC.2005.864191

P. Chandler, Self-repairing flight control system reliability and maintainability program executive overview, Proc. of the IEEE National Aerospace and Electronics Conference, pp.586-590, 1984.

J. Chen and R. Et-middleton, Special issues new developments and applications in performance limitation of feedback control, IEEE Transactions on Automatic Control, issue.8, pp.481297-481299, 2003.

S. Chen, G. Tao, and S. Et-joshi, On matching conditions for adaptive state tracking control of systems with actuator failures, IEEE Transactions on Automatic Control, vol.47, issue.3, pp.473-478, 2002.
DOI : 10.1109/9.989090

E. Chow and A. Et-willsky, Analytical redundancy and the design of robust failure detection systems, IEEE Transactions on Automatic Control, vol.29, issue.7, pp.603-614, 1984.
DOI : 10.1109/TAC.1984.1103593

B. Ciubotaru, M. Staroswiecki, and C. Et-christophe, Fault tolerant control of the boeing 747 short-period mode using the admissible model matching technique, Proc. of 6th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes (SAFEPROCESS'06), 2006.

M. Corless and J. Et-tu, State and Input Estimation for a Class of Uncertain Systems, Automatica, vol.34, issue.6, pp.757-764, 1998.
DOI : 10.1016/S0005-1098(98)00013-2

H. P. Dassanayake, C. Roberts, and C. J. Et-goodman, An architecture for system-wide fault detection and isolation, Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, vol.155, issue.23, pp.37-43, 2001.
DOI : 10.1109/5.58325

D. 'azzo, J. Et-houpis, and C. , Linear Control System Analysis and Design, Conventional and Modern. McGraw-Hill Series in Electrical and Computer Engineering, 1995.

R. Douglas and J. Et-speyer, Robust fault detection filter design, Journal of Guidance, Control, and Dynamics, vol.19, issue.1, pp.214-218, 1996.
DOI : 10.1109/TAC.1986.1104419

C. Edwards, A comparison of sliding mode and unknown input observers for fault reconstruction, Proc. of the 43rd IEEE Conference on Decision and Control, pp.5279-5284, 2004.

A. Emani-naeini, M. Hathter, and S. M. Et-rock, Effect of model uncertainty on failure detection: the threshold selector, IEEE Transactions on Automatic Control, vol.33, issue.12, pp.1106-1115, 1988.
DOI : 10.1109/9.14432

J. Eterno, J. Weiss, D. Looze, and A. Et-willsky, Design issues for fault tolerant-restructable aircraft control, Proc. of the 24th IEEE conference on decision and control, pp.900-905, 1985.

Y. Eun, C. Gokcek, P. Kabamba, and S. Et-meerkov, Selecting the level of actuator saturation for small performance degradation of linear designs, Proc. of the 40th IEEE Conference on Decision and Control, pp.1769-1774, 2001.

J. Farrell, T. Berger, and B. Et-appleby, Using learning techniques to accommodate unanticipated faults, IEEE Control Systems, vol.13, issue.3, pp.40-49, 1993.
DOI : 10.1109/37.214943

P. Frank, Fault diagnosis in dynamic systems using analytical and knowledge-based redundancy, Automatica, vol.26, issue.3, pp.459-474, 1990.
DOI : 10.1016/0005-1098(90)90018-D

P. Frank, Analytical and Qualitative Model-based Fault Diagnosis ??? A Survey and Some New Results, European Journal of Control, vol.2, issue.1, pp.6-28, 1996.
DOI : 10.1016/S0947-3580(96)70024-9

P. Frank and X. Et-ding, Frequency domain approach to optimally robust residual generation and evaluation for model-based fault diagnosis, Automatica, vol.30, issue.5, pp.789-804, 1994.
DOI : 10.1016/0005-1098(94)90169-4

P. Frank and J. Et-wunnenberg, Robust Fault Diagnosis Using Unknown Input Observers Schemes in Fault Diagnosis in Dynamic Systems -Theory and Applications, 1989.

Z. Gao and P. Et-antsaklis, Stability of the pseudo-inverse method for reconfigurable control systems, International Journal of Control, vol.32, issue.3, pp.717-729, 1991.
DOI : 10.1109/TAC.1987.1104667

Z. Gao and P. Et-antsaklis, Reconfigurable control system design via perfect model following, International Journal of Control, vol.56, issue.4, pp.783-798, 1992.
DOI : 10.1109/NAECON.1989.40230

H. Garcia, A. Ray, and R. Et-edwards, Reconfigurable control of power plants using learning automata, IEEE Control Systems, vol.11, issue.1, pp.85-92, 1991.
DOI : 10.1109/37.103362

J. Gertler, Fault detection and isolation using parity relations, Control Engineering Practice, vol.5, issue.5, pp.653-661, 1997.
DOI : 10.1016/S0967-0661(97)00047-6

E. Gilbert, I. Kalmanovsky, and K. Et-tan, Discrete-time reference governors and the nonlinear control of systems with state and control constraints, International Journal of Robust and Nonlinear Control, vol.18, issue.5, pp.487-504, 1995.
DOI : 10.1002/rnc.4590050508

E. Gilbert and I. Et-kolmanovsky, Nonlinear tracking control in the presence of state and control constraints: a generalized reference governor, Automatica, vol.38, issue.12, pp.2063-2073, 2002.
DOI : 10.1016/S0005-1098(02)00135-8

E. Gilbert and K. Et-tan, Linear systems with state and control constraints: the theory and application of maximal output admissible sets, IEEE Transactions on Automatic Control, vol.36, issue.9, pp.1008-1020, 1991.
DOI : 10.1109/9.83532

G. Goodwin, S. Graebe, and M. E. Salgado, Control System Design, 2001.

A. Guasch, J. Quevedo, and R. Et-milne, Fault diagnosis for gas turbines based on the control system, Engineering Applications of Artificial Intelligence, vol.13, issue.4, pp.477-483, 2000.
DOI : 10.1016/S0952-1976(00)00014-2

J. Guzman, T. Alamo, M. Berenguel, S. Dormido, and E. Et-camacho, A robust constrained reference governor approach using linear matrix inequalities, Journal of Process Control, vol.19, issue.5, pp.773-784, 2009.
DOI : 10.1016/j.jprocont.2008.10.003

Z. Han and P. Frank, Physical Parameter Estimation Based FDI with Neural Networks, Proc. of the IFAC Symposium SAFEPROCESS'97, 1997.
DOI : 10.1016/S1474-6670(17)42415-3

T. Hatanaka and K. Et-takaba, Reference management using state observers, International Journal of Control, vol.118, issue.8, pp.566-576, 2005.
DOI : 10.1109/TAC.1972.1099928

F. Hermans and M. Et-zarrop, Parameter Estimation Using Sliding Mode Principles, Proc. of the IFAC Symposium SAFEPROCESS97, Hull, 1997.
DOI : 10.1016/S1474-6670(17)42413-X

K. Hirata and M. Et-fujita, Set of admissible reference signals and control of systems with state and control constraints, Proceedings of the 38th IEEE Conference on Decision and Control (Cat. No.99CH36304), 1999.
DOI : 10.1109/CDC.1999.830174

K. Hirata and K. Et-kogiso, A performance improving off-line reference management for systems with state and control constraints, Proceedings of the 40th IEEE Conference on Decision and Control (Cat. No.01CH37228), 2001.
DOI : 10.1109/CDC.2001.980939

K. Hirata and Y. Et-ohta, Exact determinations of the maximal output admissible set for a class of nonlinear systems, Automatica, vol.44, issue.2, pp.526-533, 2008.
DOI : 10.1016/j.automatica.2007.06.016

M. Hou and P. Et-muller, Fault detection and isolation observers, International Journal of Control, vol.3, issue.5, pp.827-846, 1994.
DOI : 10.1016/0005-1098(76)90041-8

R. Isermann, Fault diagnosis of machines via parameter estimation and knowledge processing???Tutorial paper, Automatica, vol.29, issue.4, pp.815-836, 1993.
DOI : 10.1016/0005-1098(93)90088-B

R. Isermann, Supervision, fault-detection and fault-diagnosis methods ??? An introduction, Control Engineering Practice, vol.5, issue.5, pp.639-652, 1997.
DOI : 10.1016/S0967-0661(97)00046-4

R. Isermann, Fault Diagnosis Systems : An Introduction from Fault Detection to fault Tolerance, 2006.
DOI : 10.1007/3-540-30368-5

B. Jiang, M. Staroswiecki, and V. Et-cocquempot, Fault Accommodation for Nonlinear Dynamic Systems, IEEE Transactions on Automatic Control, vol.51, issue.9, pp.1578-1583, 2006.
DOI : 10.1109/TAC.2006.878732

B. Jiang, J. Wang, and Y. Soh, An adaptive technique for robust diagnosis of faults with independent effects on system outputs, International Journal of Control, vol.75, issue.11, pp.792-802, 2002.
DOI : 10.1016/0005-1098(76)90041-8

B. Jiang, H. Yang, and V. Et-cocquempot, Results and perspectives on fault tolerant control for a class of hybrid systems, International Journal of Control, vol.32, issue.2, pp.396-411, 2011.
DOI : 10.1016/j.arcontrol.2008.03.007

URL : https://hal.archives-ouvertes.fr/hal-00710167

J. Jiang, Design of reconfigurable control systems using eigenstructure assignments, International Journal of Control, vol.59, issue.2, pp.395-410, 1994.
DOI : 10.1109/TAC.1976.1101355

J. Jiang, Fault tolerant control systems -an introductory overview, Automatica SINCA, vol.31, issue.11, pp.161-174, 2005.

J. Jiang and Y. Et-zhang, GRACEFUL PERFORMANCE DEGRADATION IN ACTIVE FAULT-TOLERANT CONTROL SYSTEMS, Proc. of the 15th IFAC World Congress b'02, 2002.
DOI : 10.3182/20020721-6-ES-1901.00777

J. Jiang and Y. Et-zhang, Accepting performance degradation in fault-tolerant control system design, IEEE Transactions on Control Systems Technology, vol.14, issue.2, pp.284-292, 2006.
DOI : 10.1109/TCST.2005.860515

J. Jiang and Q. Et-zhao, Design of Reliable Control Systems Possessing Actuator Redundancies, Journal of Guidance, Control, and Dynamics, vol.4, issue.2, pp.709-718, 2000.
DOI : 10.1080/00207729108910737

S. Kanev and M. Et-verhaegen, A bank of reconfigurable LQG controllers for linear systems subjected to failures, Proceedings of the 39th IEEE Conference on Decision and Control (Cat. No.00CH37187), 2000.
DOI : 10.1109/CDC.2000.912282

J. Y. Keller and M. Et-darouach, A New Estimator for Dynamic Stochastic Systems with Unknown Inputs: Application to Robust Fault Diagnosis, Proc. of the IFAC Symposium SAFEPROCESS'97, 1997.
DOI : 10.1016/S1474-6670(17)42398-6

K. Kogiso and K. Et-hirata, A reference governor in a piecewise state affine function, 42nd IEEE International Conference on Decision and Control (IEEE Cat. No.03CH37475), 2003.
DOI : 10.1109/CDC.2003.1272865

K. Kogiso and K. Et-hirata, Reference governor for constrained systems with time-varying references, Robotics and Autonomous Systems, vol.57, issue.3, pp.289-295, 2009.
DOI : 10.1016/j.robot.2008.10.015

I. Konstantopoulos and P. Et-antsaklis, Eigenstructure assignment in reconfigurable control systems, 1996.

I. Konstantopoulos and P. J. Et-antsaklis, An optimization approach to control reconfiguration, Dynamics and Control, vol.9, issue.3, pp.255-270, 1999.
DOI : 10.1023/A:1008394805721

J. Korbicz, J. Koscielny, Z. Kowalczuk, and W. Et-choleva, Fault Diagnosis, Models Artificial Intelligence, Applications, 2004.

F. Liao, J. Wang, and G. Et-yang, Reliable robust flight tracking control: an LMI approach, IEEE Transactions on Control Systems Technology, vol.10, issue.1, pp.76-89, 2002.
DOI : 10.1109/87.974340

W. Liu, An on-line expert system-based fault-tolerant control system, Expert Systems with Applications, vol.11, issue.1, pp.59-64, 1998.
DOI : 10.1016/0957-4174(96)00006-1

D. Looze, J. Weiss, J. Eterno, and N. Et-barett, An automatic redesign approach for restructurable control systems, IEEE Control Systems Magazine, vol.5, issue.2, pp.16-22, 1985.
DOI : 10.1109/MCS.1985.1104940

J. Lunze and J. Et-richter, Reconfigurable Fault-tolerant Control: A Tutorial Introduction, European Journal of Control, vol.14, issue.5, pp.359-386, 2008.
DOI : 10.3166/ejc.14.359-386

J. Maciejowski, Reconfigurable control using constrained optimization, Proc. of the European Control Conference ECC'97, Plenary Lectures and Mini-Courses, pp.107-130, 1997.

J. Maciejowski, The implicit daisy-chaining property of constrained predictive control, Int. J. of Applied Mathematics and Computer Science, vol.8, pp.695-711, 1998.

J. Maciejowski, Fault-tolerant aspects of mpc, Proc. of the IEEE Workshop on Model Predictive Control : Techniques and Applications. 1.3.2, 1999.

J. Maciejowski, Predictive Control with Constraints, 2002.

J. Maciejowski and . Jones, MPC fault-tolerant flight control case study: flight 1862, Proc. of the IFAC Safeprocess Conference, 2003.
DOI : 10.1016/S1474-6670(17)36480-7

URL : https://infoscience.epfl.ch/record/169763/files/safeprocess.pdf

M. Mahmoud, J. Jiang, and Y. Et-zhang, Active Fault Tolerant Control Systems : Stochastic Analysis and Synthesis, Lecture Notes in Control and Information Sciences, vol.287, issue.21, 2003.

P. Maybeck and R. Et-stevens, Reconfigurable flight control via multiple model adaptive control methods, IEEE Transactions on Aerospace and Electronic Systems, vol.27, issue.3, pp.470-479, 1991.
DOI : 10.1109/7.81428

L. Mendonca, S. Vieira, J. Sousa, and J. Et-sa-da-costa, Fault Accommodation Using Fuzzy Predictive Control, 2006 IEEE International Conference on Fuzzy Systems, 2006.
DOI : 10.1109/FUZZY.2006.1681912

D. Moerder, N. Halyo, J. Broussard, and A. Et-caglayan, Application of precomputed control laws in a reconfigurable aircraftflight control system, Journal of Guidance, Control, and Dynamics, vol.12, issue.3, pp.325-333, 1989.
DOI : 10.1109/TAC.1981.1102565

J. Monaco, D. Ward, R. Barron, and R. Bird, Implementation and flight test assessment of an adaptive, reconfigurable flight control system, Guidance, Navigation, and Control Conference, pp.1443-1454, 1997.
DOI : 10.2514/3.21417

M. Napolitano, C. Neppach, V. Casdorph, and S. Et-naylor, Neural-network-based scheme for sensor failure detection, identification, and accommodation, Journal of Guidance, Control, and Dynamics, vol.18, issue.6, pp.1280-1286, 1995.
DOI : 10.2514/6.1991-2631

R. Nikoukhah, Innovations generation in the presence of unknown inputs: Application to robust failure detection, Automatica, vol.30, issue.12, pp.1851-1868, 1994.
DOI : 10.1016/0005-1098(94)90047-7

H. Noura, T. Bastogne, and V. Et-dardinier-maron, A general fault-tolerant control approach: application to a winding machine, Proceedings of the 38th IEEE Conference on Decision and Control (Cat. No.99CH36304), 1999.
DOI : 10.1109/CDC.1999.827907

H. Noura, D. Sauter, F. Hamelin, and D. Et-theilliol, Fault-tolerant control in dynamic systems: application to a winding machine, IEEE Control Systems Magazine, vol.20, issue.1, pp.33-49, 2000.
DOI : 10.1109/37.823226

H. Noura, D. Theilliol, J. Ponsart, and A. Et-chamssedine, Fault-tolerant Control Systems : Design and Practical Applications Advances in Industrial Control, 2009.
DOI : 10.1007/978-1-84882-653-3

J. Oh, H. Kim, and Y. Et-cho, Adaptive reference governor for constrained linear systems, Journal of Mechanical Science and Technology, vol.200, issue.3, pp.61-69, 2008.
DOI : 10.1137/1.9781611970791

S. Oh-hara and K. Et-kirata, Experimental evaluation of on-line reference governors for constrained systems, Proc. of the SICE Annual Conference in Fukui, 2003.

Y. Ohta, K. Mori, K. Yukimoto, and R. Et-mishio, On-line reference management for discrete-time servo systems under state and control constraints, 31st Annual Conference of IEEE Industrial Electronics Society, 2005. IECON 2005., 2005.
DOI : 10.1109/IECON.2005.1568901

M. Oosterom and R. Et-babuska, Virtual sensor for fault detection and isolation in flight control systems - fuzzy modeling approach, Proceedings of the 39th IEEE Conference on Decision and Control (Cat. No.00CH37187), 2000.
DOI : 10.1109/CDC.2000.914204

R. Patton, Fault-tolerant control systems : The 1997 situation of the IFAC symposium on fault detection, supervision and safety for technical processes, Proc, pp.1033-1054, 1997.

R. Patton and J. Et-chen, Robust fault detection using eigenstructure assignement : A tutorial consideration and some new results, Proc. of the 30th IEEE Conference on Decision and Control, 1991.

R. Patton and S. M. Et-kangethe, Robust Fault Diagnosis Using Eingenstructure Assignement of Observers in Fault Diagnosis in Dynamic Systems -Theory and Applications, 1989.

S. Patwardhan, S. Manuja, S. Narasimhan, and S. Shah, From data to diagnosis and control using generalized orthonormal basis filters. Part II: Model predictive and fault tolerant control, Journal of Process Control, vol.16, issue.2, pp.157-175, 2006.
DOI : 10.1016/j.jprocont.2005.04.011

P. Aguiara, A. Hespanhab, J. Et-kokotovic, and P. , Performance limitations in reference tracking and path following for nonlinear systems, Automatica, vol.44, issue.3, pp.598-610, 2008.
DOI : 10.1016/j.automatica.2007.06.030

T. Perez, G. Goodwin, and M. Et-seron, Performance degradation in feedback control due to constraints, IEEE Transactions on Automatic Control, vol.48, issue.8, pp.1381-1385, 2003.
DOI : 10.1109/TAC.2003.815045

M. Polycarpou and A. Vemuri, Learning methodology for failure detection and accommodation, IEEE Control Systems, vol.15, issue.3, pp.16-24, 1995.
DOI : 10.1109/37.387613

URL : http://www.ece.uc.edu/~avemuri/csm_fda.ps

J. Prakash, S. Narasimhan, and S. Et-patwardhan, Integrating model based fault diagnosis with model predictive control. Industrial and engineering chemistry research, pp.4344-4360, 2005.
DOI : 10.1021/ie049392z

H. Rauch, Intelligent fault diagnosis and control reconfiguration, IEEE Control Systems, vol.14, issue.3, pp.6-12, 1994.
DOI : 10.1109/37.291462

H. Rauch, Autonomous control reconfiguration, IEEE Control Systems, vol.15, issue.6, pp.37-48, 1995.
DOI : 10.1109/37.476385

J. Rawlings, Tutorial overview of model predictive control, IEEE Control Systems Magazine, vol.20, issue.3, pp.38-52, 2000.
DOI : 10.1109/37.845037

J. Richter, T. Schlage, and J. Et-lunze, Control reconfiguration of a thermofluid process by means of a virtual actuator, IET Control Theory & Applications, vol.1, issue.6, pp.1606-1620, 2007.
DOI : 10.1049/iet-cta:20060506

M. Seron and J. Et-de-dona, Fault tolerant control using virtual actuators and invariant-set based fault detection and identification, Proceedings of the 48h IEEE Conference on Decision and Control (CDC) held jointly with 2009 28th Chinese Control Conference, pp.7801-7806, 2009.
DOI : 10.1109/CDC.2009.5399909

L. Shen, S. Chang, and P. Hsu, Robust Fault Detection and Isolation with Unstructured Uncertainty Using Eigenstructure Assignment, Journal of Guidance, Control, and Dynamics, vol.10, issue.4, pp.50-55, 1998.
DOI : 10.2514/3.44364

D. Siljak, Reliable control using multiple control systems, International Journal of Control, vol.22, issue.2, pp.303-329, 1980.
DOI : 10.1007/978-1-4684-2259-7_23

S. Simani, C. Fantuzzi, and R. J. Et-patton, Model-based Fault Diagnosis in Dynamic Systems Using Identification Techniques, 2003.
DOI : 10.1007/978-1-4471-3829-7

M. Staroswiecki, FAULT TOLERANT CONTROL : THE PSEUDO-INVERSE METHOD REVISITED, IFAC Proceedings Volumes, vol.38, issue.1, 2005.
DOI : 10.3182/20050703-6-CZ-1902.01872

M. Staroswiecki and A. Et-gehin, From control to supervision, Annual Reviews in Control, vol.25, pp.1-11, 2001.
DOI : 10.1016/S1367-5788(01)00002-5

T. Steffen, Control reconfiguration of dynamic systems : Linear approaches and structural tests. Lecture notes in control and information sciences, 2005.

M. Steinberg, Historical Overview of Research in Reconfigurable Flight Control, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol.20, issue.3, pp.263-275, 2005.
DOI : 10.2514/2.4796

R. Stengel, Intelligent failure-tolerant control, IEEE Control Systems, vol.11, issue.4, pp.14-23, 1991.
DOI : 10.1109/37.88586

B. Stevens and F. Lewis, Aircraft Control and Simulation, Aircraft Engineering and Aerospace Technology, vol.76, issue.5, 1992.
DOI : 10.1108/aeat.2004.12776eae.001

T. Sugie and H. Et-yamamoto, Reference management for closed loop systems with state and control constraints, Proc. of the American Control Conference, 2001.

D. Theilliol, H. Noura, and J. Et-ponsart, Fault diagnosis and accommodation of a three-tank system based on analytical redundancy, ISA Transactions, vol.41, issue.3, pp.365-382, 2002.
DOI : 10.1016/S0019-0578(07)60094-9

D. Theilliol, H. Noura, and D. Et-sauter, Fault-tolerant control method for actuator and component faults, Proceedings of the 37th IEEE Conference on Decision and Control (Cat. No.98CH36171), pp.604-609, 1998.
DOI : 10.1109/CDC.1998.760745

D. Theilliol, Y. Zhang, and J. Et-ponsart, Fault Tolerant Control System against actuator failures based on re-configuring reference input, 2009 International Conference on Advances in Computational Tools for Engineering Applications, 2009.
DOI : 10.1109/ACTEA.2009.5227904

URL : https://hal.archives-ouvertes.fr/hal-00420023

D. Theilliol, Y. Zhang, J. Ponsart, and C. Et-aubrun, Actuator fault tolerant control system with re-configuring reference input design based on mpc, Proc. of 23rd IAR Workshop on Advanced Control and Diagnosis, pp.275-280, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00346987

R. Toscano, Commande et diagnostic des systèmes dynamiques. Ellipses Edition Marketing S.A, Paris, 2005.

R. Veillette, Reliable linear-quadratic state-feedback control, Automatica, vol.31, issue.1, pp.137-143, 1995.
DOI : 10.1016/0005-1098(94)E0045-J

R. Veillette, J. Medanic, and W. Et-perkins, Design of reliable control systems, IEEE Transactions on Automatic Control, vol.37, issue.3, pp.290-300, 1992.
DOI : 10.1109/9.119629

B. K. Walker and K. Y. Et-huang, FDI by extended Kalman filter parameter estimation for an industrial actuator benchmark, Control Engineering Practice, vol.3, issue.12, pp.1769-1774, 1995.
DOI : 10.1016/0967-0661(95)00192-W

W. Wang and S. Et-daley, Actuator fault diagnosis: an adaptive observer-based technique, IEEE Transactions on Automatic Control, vol.41, issue.7, pp.1073-1078, 1996.
DOI : 10.1109/9.508919

N. Wu, S. Thavamani, Y. Zhang, and M. Et-blanke, Sensor fault masking of a ship propulsion system, Control Engineering Practice, vol.14, issue.11, pp.1337-1345, 2006.
DOI : 10.1016/j.conengprac.2005.09.003

N. Wu, Y. Zhang, and K. Et-zhou, Detection, estimation and accommodation of loss control effectiveness, International Journal of Adaptive Control and Signal Processing, vol.14, issue.7, pp.775-795, 2000.

G. Yang, S. Zhang, J. Lam, and J. Et-wang, Reliable control using redundant controllers, IEEE Transactions on Automatic Control, vol.43, issue.11, pp.1588-1593, 1998.
DOI : 10.1109/9.728875

G. Yen and L. Et-ho, Online multiple-model-based fault diagnosis and accommodation, IEEE Transactions on Industrial Electronics, vol.50, issue.2, pp.296-312, 2003.
DOI : 10.1109/TIE.2003.809390

S. Yoon and J. Et-mac-gregor, Statistical and causal model-based approaches to fault detection and isolation, AIChE Journal, vol.12, issue.9, pp.1813-1824, 2000.
DOI : 10.1002/0471725331

S. Yoon and J. F. Et-mac-gregor, Fault diagnosis with multivariate statistical models part I: using steady state fault signatures, Journal of Process Control, vol.11, issue.4, pp.387-393, 2001.
DOI : 10.1016/S0959-1524(00)00008-1

K. Zhang, B. Jiang, and V. Et-cocquempot, Adaptive observer-based fast fault estimation, International Journal of Control, Automation, and Systems, vol.6, issue.3, pp.320-326, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00711734

Y. Zhang and J. Et-jiang, Fault tolerant control systems design with consideration of performance degradation, Proc. of the American Control Conference, pp.2694-2699, 2001.

Y. Zhang and J. Et-jiang, Integrated active fault-tolerant control using IMM approach, IEEE Transactions on Aerospace and Electronic Systems, vol.37, issue.4, pp.1221-1235, 2001.
DOI : 10.1109/7.976961

Y. Zhang and J. Et-jiang, Active fault-tolerant control system against partial actuator failures, IEE Proceedings -Control Theory and Applications, pp.95-104, 2002.
DOI : 10.1049/ip-cta:20020110

Y. Zhang and J. Et-jiang, Bibliographical review on reconfigurable fault-tolerant control systems, Proc. of the 5th IFAC Symposium on Fault Detection, Supervision and safety for Technical Processes, pp.265-276, 2003.

Y. Zhang and J. Et-jiang, Fault tolerant control system design with explicit consideration of performance degradation, IEEE Transactions on Aerospace and Electronic Systems, vol.39, issue.3, pp.838-848, 2003.
DOI : 10.1109/TAES.2003.1238740

Y. Zhang and J. Et-jiang, Bibliographical review on reconfigurable fault-tolerant control systems, Annual Reviews in Control, vol.32, issue.2, pp.229-252, 2008.
DOI : 10.1016/j.arcontrol.2008.03.008

Y. Zhang, J. Jiang, and D. Et-thelliol, Adaptive Clustering with Dynamic Cluster Radius for Wireless Sensor Network, International Journal of Control and Automation, vol.6, issue.6, pp.327-338, 2008.
DOI : 10.14257/ijca.2013.6.6.31

Y. Zhang, J. Jiang, Z. Yang, and A. Et-hussain, MANAGING PERFORMANCE DEGRADATION IN FAULT TOLERANT CONTROL SYSTEMS, Proc. of 16th IFAC World Congress, 2005.
DOI : 10.3182/20050703-6-CZ-1902.01873

Y. M. Zhang and X. Li, Detection and diagnosis of sensor and actuator failures using IMM estimator, IEEE Transactions on Aerospace and Electronic Systems, vol.34, issue.4, pp.1293-1313, 1998.
DOI : 10.1109/7.722715

Q. Zhao and J. Et-jiang, Reliable State Feedback Control System Design Against Actuator Failures, Automatica, vol.34, issue.10, pp.1267-1272, 1998.
DOI : 10.1016/S0005-1098(98)00072-7

B. Boussaid, C. Aubrun, M. N. Abdelkrim, and M. K. Gayed, Performance evaluation based fault tolerant control with actuator saturation avoidance, Liste des publications de l'auteur Publication dans des revues internationales avec comité de lecture 1, 2011.
DOI : 10.1016/j.arcontrol.2008.03.008

URL : https://hal.archives-ouvertes.fr/hal-00637542

P. Weber, B. Boussaid, A. Khelassi, D. Thelliol, and C. Aubrun, Reconfigurable control design with integration of a reference governor and reliability indicators, International Journal of Applied Mathematics and Computer Science, vol.18, issue.4, 2011.
DOI : 10.2478/v10006-008-0048-1

URL : https://hal.archives-ouvertes.fr/hal-00679885

B. Boussaid, C. Aubrun, and M. N. Abdelkrim, Set-point reconfiguration approach for the FTC of wind turbines, Proc. of the 18th World Congress of the International Federation of Automatic Control (IFAC), 2011.
DOI : 10.3182/20110828-6-IT-1002.03530

URL : https://hal.archives-ouvertes.fr/hal-00638190

B. Boussaid, C. Aubrun, and M. N. Abdelkrim, Selection Index Synthesis for 2-level AFTC Design, Proc. of the 2011 Conférence Méditerranéenne sur l'Ingénierie Sûre des Systèmes Complexes (MISC'11, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00598072

B. Boussaid, C. Aubrun, and M. N. Abdelkrim, Two-level Active Fault Tolerant Control approach, Eighth International Multi-Conference on Systems, Signals & Devices, pp.1-6, 2011.
DOI : 10.1109/SSD.2011.5767392

URL : https://hal.archives-ouvertes.fr/hal-01265221

B. Boussaid, C. Aubrun, and M. N. Abdelkrim, Active Fault Tolerant approach for wind turbines, 2011 International Conference on Communications, Computing and Control Applications (CCCA), 2011.
DOI : 10.1109/CCCA.2011.6031406

URL : https://hal.archives-ouvertes.fr/hal-00573963

B. Boussaid, C. Aubrun, and M. N. Abdelkrim, Set-point reconfiguration in case of severe actuator fault, Proc. of the 8th Workshop on Advanced Control and Diagnosis (ACD'10), 2010.

B. Boussaid, C. Aubrun, and M. N. Abdelkrim, Fault adaptation based on reference governor, 2010 Conference on Control and Fault-Tolerant Systems (SysTol), pp.257-262, 2010.
DOI : 10.1109/SYSTOL.2010.5675992

B. Boussaid, C. Aubrun, M. K. Gayed, and M. N. Abdelkrim, FTC approach based on predictive governor, 2009 IEEE International Conference on Control and Automation, pp.2088-2093, 2009.
DOI : 10.1109/ICCA.2009.5410345

URL : https://hal.archives-ouvertes.fr/hal-00456252

B. Boussaid, C. Aubrun, and M. N. Abdelkrim, A design method for fault adaptation with actuators saturations avoidance, Proc. of the 7th Workshop on Advanced Control and Diagnosis (ACD'09), 2009.