. M. Kazayawoko and M. J. Balatinecz, Surface modification and adhesion mechanisms in wood fiberpolypropylene composites, Journal of Materials Science, vol.34, issue.24, pp.6189-6199, 1999.
DOI : 10.1023/A:1004790409158

. M. Timar, . K. Maher, and M. M. Irle, Preparation of Wood with Thermoplastic Properties, Part 1. Classical Synthesis, Holzforschung, vol.35, issue.1, pp.5471-76, 2000.
DOI : 10.1515/hfsg.1981.35.5.253

.. L. 128-matuana, . J. Balatinecz, and . R. Sodhi, Surface characterization of esterified cellulosic fibers by XPS and FTIR Spectroscopy, Wood Science and Technology, vol.35, issue.3, pp.191-201, 2001.
DOI : 10.1007/s002260100097

K. P. Jandura, Fibrous Long-Chain Organic Acid Cellulose Esters and their characterization by diffuse reflectance FTIR spectroscopy, solid state CP/MAS 13C-NMR and X-ray diffraction, J. App. Polym. Sci, pp.78-1354, 2000.

L. H. Schreiber, Overview of Inverse Gas Chromatography, ACS Symposium series American Chem. Soc, vol.1, pp.1-10, 1989.
DOI : 10.1021/bk-1989-0391.ch001

R. D. Kamdem, Inverse gas chromatography of lignocellulosic fibers coated with a thermosetting polymer: Use of peak maximum and conder and young methods, Journal of Colloid and Interface Science, vol.150, issue.2, pp.150507-516, 1992.
DOI : 10.1016/0021-9797(92)90219-C

. W. Beckert and . Lauke, Critical discussion of the single-fibre pull-out test: does it measure adhesion?, Composites Science and Technology, vol.57, issue.12
DOI : 10.1016/S0266-3538(97)00107-3

R. M. Rowell, Y. R. Rowell, and J. , K : Paper and composites from agro-based resources, 1997.

A. K. Bledzki and J. Gassan, Composite reinforced with cellulose based fibers, Progress in Polymer Science, vol.24, p.221274, 1999.

M. G. Mukherjee, X-Ray diffraction study of fibrous polymers /Degree of paracristallinity a new parameter for characterizing fibrous polymers, Polymer, vol.21, pp.1403-1409, 1980.

. D. Fengel and . G. Wegener, Wood chemistry ultrastructure and reactions

. K. Shimizu, Chemistry of hemicelluloses, Wood and cellulosic chemistry, Edition D. N-S

. A. Mazumdar, A note on the hemicelluloses of some bast fibers, Journal of Scientific and Industrial Research, vol.14, pp.542-544, 1955.

. B. Lohani and . B. Biswas, Examination of the bast fibre of Cannabis sativa, lin (wild variety), The Textile Manufacturer, pp.329-332, 1953.

D. Sedan, Thése de doctorat Etude des interactions physico-chimiques aux interfaces fibres de chanvre/ciment. Influence sur les propriétés mécaniques du composite, 2007.

. J. Daniel, Cellulose, structure and properties, Encyclopedia of polymer science and ingeneering, pp.91-123, 1987.

M. C. Pavithran, . M. Brahmakumar, and . A. Damodaran, Impact properties of natural fiber composites, J. Mater. Sci, vol.6, pp.882-884, 1987.

Y. B. English and . A. Krzysik, Chap 6: Lignocellulosic Composites, Hanser publishers (NY), pp.115-130, 1994.

. A. Stamm, Thermal Degradation of Wood and Cellulose, Industrial & Engineering Chemistry, vol.48, issue.3, 1956.
DOI : 10.1021/ie51398a022

D. Kim, Y. Nishiyama, M. Wada, S. Kuga, and T. Okano, Thermal Decomposition of Cellulose Crystallites in Wood, Holzforschung, vol.38, issue.5, pp.521-524, 2001.
DOI : 10.1023/A:1018435806488

. D. Rutot and . Dubois, Les (bio) polymères biodégradables : l'enjeu de demain ?, pp.66-75, 2004.

. C. Baley and P. Y. Grohens, State of the art regarding biodegradable composites, Revue des Composites et des Matériaux Avances, pp.14-135, 2004.

J. S. Cheng and . J. Rodriguez, Crystalline structures of polypropylene homo- and copolymers, 1995.
DOI : 10.1007/978-94-011-0567-5_2

. T. Labour, . C. Gauthier, . R. Seguela, . G. Vigier, . Y. Bomal et al., Influence of the ? crystalline phase on the mechanical properties of unfilled and CaCO3-filled polypropylene. I. Structural and mechanical characterisation, Polymer, pp.42-7127, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00475294

. Tordjeman, R. Ph, . Ch, and . Gerard, The mechanichal properties of ?, ? polypropylene, pp.21-25, 2002.

G. C. Sell, . A. Dahoun, . V. Favier, P. J. Hiver, and C. G. , Microstructure transformation and stress-strain behavior of isotactic polypropylene under large plastic deformation, Polymer Engineering & Science, vol.44, issue.18, pp.1702-1711, 1997.
DOI : 10.1002/pen.11818

H. B. Monasse, Molecular structure of polypropylene homo- and copolymers
DOI : 10.1007/978-94-011-0567-5_1

. M. Lopez-manchado and . Arroyo, Thermal and dynamic mechanical properties of polypropylene and short organic fiber composites, Polymer, vol.41, issue.21, pp.41-7761, 2000.
DOI : 10.1016/S0032-3861(00)00152-X

. R. Seguela, . E. Staniek, . B. Escaig, and . Fillon, Plastic deformation of polypropylene in relation to crystalline structure, Journal of Applied Polymer Science, vol.26, issue.61, pp.71-1873, 1999.
DOI : 10.1016/0032-3861(85)90240-X

G. C. Fond and . Sell, C, Localization of damage processes and cavitation mechanisms in multiphase polymers, pp.431-438, 2002.

. Y. Li, Y. Q. Fang, and . Zheng, A study of internal friction in polypropylene (PP) filled with nanometer-scale CaCO3 particles, Materials Science and Engineering: A, vol.370, issue.1-2, pp.268-272, 2004.
DOI : 10.1016/j.msea.2003.07.014

R. E. Vink and G. D. Gruber, Applications of life cycle assessment to NatureWorksTM polylactide (PLA) production, Polym. Deg. Stab, pp.80-403, 2003.

. Mannien, . Mj, . U. Paivarinta, . P. Rokkanen, . R. Taurio et al., M, Shear strength ofcancellous bone after osteotomy fixed with absorbale self reinforced polyglycolic acid and poly lactic acid rods, J Mater Sci, vol.3, pp.245-251, 1992.

. A. Södegard, Lactic acid based polymers for packaging materials for the Food Industry. The Food Biopack Conference, pp.27-29, 2000.

. M. Viljanmaa, . A. Södegard, and . Törmälä, Lactic acid based polymers as hot melt adhesives for packaging applications, International Journal of Adhesion and Adhesives, vol.22, issue.3, pp.219-226, 2002.
DOI : 10.1016/S0143-7496(01)00057-4

. L. Cartier, . T. Okihara, . Y. Ikada, . H. Tsuji, . J. Puiggali et al., Epitaxial crystallization and crystalline polymorphism of polylactides, Polymer, vol.41, issue.25, pp.41-8909, 2000.
DOI : 10.1016/S0032-3861(00)00234-2

. M. Hiljanen-vainio, . P. Varpomaa, and T. J. Seppälä, Modification of poly(L-lactides) by blending: mechanical and hydrolytic behavior, Macromolecular Chemistry and Physics, vol.197, issue.4, pp.79-1503, 1996.
DOI : 10.1002/macp.1996.021970427

. H. Tsuji and . Ikada, Crystallization from the melt of poly(lactide)s with different optical purities and their blends, Macromolecular Chemistry and Physics, vol.197, issue.10, pp.3483-3499, 1996.
DOI : 10.1002/macp.1996.021971033

. M. Pyda and . Wunderlich, Reversing and Nonreversing Heat Capacity of Poly(lactic acid) in the Glass Transition Region by TMDSC, Macromolecules, vol.38, issue.25, pp.10472-10479, 2005.
DOI : 10.1021/ma051611k

.. A. 36-amass, K. L. N-'goala, B. J. Tighe, and . Schué, Polylactic acids produced from L-and DL-lactic acid anhydrosulfite: stereochemical aspects, Polym, pp.40-5073, 1999.

. G. Stoclet and . Thèse-de-doctorat, Etude de la structuration différents niveaux d'échelle et du comportement thermomécanique d'un polymère issu de ressources renouvelables: l'acide poly lactique, 2009.

D. P. Santis and . J. Kovacs, Molecular conformation of poly (S-lactic acid) Biopolymers, pp.299-306, 1965.

. W. Hoogsteen, P. A. Postema, and T. Brinke, G, Crystal structure, conformation and morphology of solution spun poly(L-lactide) fibers, macromolecules, pp.634-642, 1990.

. J. Zhang, . K. Tashiro, and D. H. Tsuji, A J, disorder to order phase transition and multiple melting behaviour of poly lactic investigated by simultaneaous measurements of WAXD and DSC, Macromolecules, pp.41-1352, 2008.

. B. Eling and P. S. Gogolewski, Biodegradable materials of poly(l-lactic acid): 1. Melt-spun and solution-spun fibres, Polymer, vol.23, issue.11, pp.1587-1593, 1982.
DOI : 10.1016/0032-3861(82)90176-8

. D. Sawai, . K. Takahashi, . A. Sasahige, and H. T. Kanamoto, -lactic acid) by Solid-State Coextrusion:?? Effect of Extrusion Variables, Macromolecules, vol.36, issue.10, pp.36-3601, 2003.
DOI : 10.1021/ma030050z

. D. Cohn, . H. Younes, P. /. Biodegradable, . Pla, and . Copolymers, Biodegradable PEO/PLA block copolymers, Journal of Biomedical Materials Research, vol.6, issue.11, pp.993-1009, 1988.
DOI : 10.1016/S0015-0282(16)44002-1

. G. Aliprandi, Matériaux réfractaires et céramiques techniques, pp.489-519, 1989.

. Williams, Automotive industry uses of natural fiber reinforced composites In: The Global Outlook for Natural Fiber & Wood Composites, 2003.

. P. Herrera-franco, . A. Valadez-gonzalez, and . Cervantes-uc, Development and characterization of a HDPE-sand-natural fiber composite, Composites Part B: Engineering, vol.28, issue.3, pp.331-343, 1997.
DOI : 10.1016/S1359-8368(96)00024-8

D. A. Alburquerque, J. K. Hecker-de-carvalho, and . Morais-d-'almeida, J, Effect of wettability and ageing conditions on the physical and mechanical properties of uniaxially oriented jute-roving-reinforced polyester composites, Composites Science and Technology, pp.60-833, 1999.

B. M. Snijder, Reinforcement of polypropylene by annual plant fibers: optimisation of the coupling agent efficiency, Composite Interfaces, vol.8, issue.2, pp.69-79, 2000.
DOI : 10.1007/BF00818801

. M. Belgacem, . P. Bataille, and . Sapeiha, Effect of corona modification on the mechanical properties of polypropylene/cellulose composites, Journal of Applied Polymer Science, vol.53, issue.4, pp.53-379, 1994.
DOI : 10.1002/app.1994.070530401

C. J. Felix and . Gatenholm, Adhesion characteristics of oxygen plasma-treated rayon fibers, Journal of Adhesion Science and Technology, vol.7, issue.2, pp.163-180, 1994.
DOI : 10.1021/la00059a016

. E. Bisanda, The effect of silane treatment on the mechanical and physical properties of sisal-epoxy composites, Composites Science and Technology, vol.41, issue.2, pp.41165-178, 1991.
DOI : 10.1016/0266-3538(91)90026-L

P. S. Sapieha and . Schreiber, Thermal degradation of cellulose-containing composites during processing, Journal of Applied Polymer Science, vol.37, issue.1, pp.233-240, 1989.
DOI : 10.1002/app.1989.070370118

. J. Felix and . Gatenholm, The nature of adhesion in composites of modified cellulose fibers and polypropylene, Journal of Applied Polymer Science, vol.42, issue.3, pp.609-620, 1991.
DOI : 10.1002/app.1991.070420307

. C. Klason, . J. Kubat, and . H. Strömvall, The efficiency of cellulosic fillers in common thermoplastics

. S. Shaler, . L. Groom, and . Mott, Microscopic Analysis of wood fibers using ESEM and confocal Microscopy

. N. Stark and . A. Sanadi, Effects of fiber type on the properties of wood-plastic composites. Progress in woodfibre-plastic composites conference, Materials and Manufacturing Ontario, 2000.

C. A. Sanadi, J. R. , and R. R. , Renewable Agricultural Fibers as Reinforcing Fillers in Plastics: Mechanical Properties of Kenaf Fiber-Polypropylene Composites, Industrial & Engineering Chemistry Research, vol.34, issue.5, pp.34-1889, 1995.
DOI : 10.1021/ie00044a041

. M. Shanahan, Adhesion and Wetting : Similarities and differences, Rubber World, pp.28-60, 1991.

. A. Roche, Les théories de l'adhésion et mesure de l'adhérence, Le Vide, les Couches Minces, pp.197-230, 1925.

. A. Kinloch, The science of adhesion, Journal of Materials Science, vol.14, issue.11, pp.2141-2166, 1980.
DOI : 10.5254/1.3542926

. S. Voyutskii, Autoadhesion and Adhesion of High Polymers, 1963.

P. O. Smith and . P. Mills, Tailored Adhesion at Polymer/non Polymer Interfaces, J. Polym.Sci

. J. Schultz and . A. Carré, Adhesion and cohesion of elastomers, Applied Polymer Symposia, pp.103-111, 1984.

. J. Cognard, Sciences et technologie du collage, presses polytechniques et universitaires romandes, 2003.

R. A. Bledzki and . J. Gassan, Properties and modifications methods for vetables fiber for natural fibre composites, J. Appl. Polym. Sci, pp.59-1329, 1996.

J. Z. Lu, Q. Wu, and H. Mcnabb, S : Chemical coupling in wood fiber and polymer composites : A review of coupling agents and treatments, Wood Fib. Sci, pp.3288-104, 2000.

. D. Maldas, . Kotka, and . Bv, Surface modification of wood fibers using maleic anhydride and isocyanate as coating components and their performance in polystyrene composites, Journal of Adhesion Science and Technology, vol.38, issue.9, pp.727-740, 1991.
DOI : 10.1002/app.1989.070380303

F. P. Gatenholm, . C. Klason, and . J. Kubat, Cellulose-Polymer Composites with Improved Properties, Contemporary topics in polymer science : Advances in new materials
DOI : 10.1007/978-1-4615-3456-3_7

. Rozman, . Hd, . Banks, . Wb, . Lawther et al., Improvements of fiberboard properties through fiber activation and subsequent copolymerization with vinyl monomer, Journal of Applied Polymer Science, vol.54, issue.2, pp.54191-200, 1994.
DOI : 10.1002/app.1994.070540205

F. P. Zadorecki, An ESCA study of chemical reactions on the surfaces of cellulose fibers, Journal of Polymer Science Part A: Polymer Chemistry, vol.24, issue.4
DOI : 10.1002/pola.1986.080240417

.. N. 75-zafeiropoulos, W. D. , and B. C. Matthews, Engineering and characterisation of the interface in flax fibre/polypropylene composite materials. Part I. Development and investigation of surface treatments, Composites Part A: Applied Science and Manufacturing, vol.33, issue.8, pp.33-1083, 2002.
DOI : 10.1016/S1359-835X(02)00082-9

. H. Dalväg, . C. Klason, and . H. Stromvall, The Efficiency of Cellulosic Fillers in Common Thermoplastics. Part II. Filling with Processing Aids and Coupling Agents, International Journal of Polymeric Materials and Polymeric Biomaterials, vol.41, issue.1, pp.9-38, 1985.
DOI : 10.1063/1.1658506

D. S. Elvy and . N. Loo-teck, Effects of coupling agent on the physical properties of woodpolymer composites, J. Mater. Proc. Tech, pp.48365-372, 1995.

. R. Agrawal, . N. Saxena, and T. K. Sharma, Activation energy and crystallization kinetics of untreated and treated oil palm fibre reinforced phenol formaldehyde composites, Materials Science and Engineering: A, vol.277, issue.1-2, 2000.
DOI : 10.1016/S0921-5093(99)00556-0

. P. Tingaut, Modification de la structure du bois par des alcoxysilanes diversement substitués, 2006.

. P. Jandura and K. B. Riedl, Thermal degradation behavior of cellulose fibers partially esterified with some long chain organic acids, Polymer Degradation and Stability, vol.70, issue.3, pp.387-394, 2000.
DOI : 10.1016/S0141-3910(00)00132-4

C. D. Hon, Composites from benzylated wood and polystyrenes: Their processability and viscoelastic properties, Journal of Applied Polymer Science, vol.50, issue.1, pp.50-57, 1993.
DOI : 10.1002/app.1993.070500102

. P. Bataille, . M. Dufourd, and . Sapieha, Copolymerization of styrene on to cellulose activated by corona, Polymer International, vol.34, issue.4, pp.38-45, 1994.
DOI : 10.1002/pi.1994.210340406

. D. Zhang and W. Q. Sun, Mechanism of corona treatment on polyolefin films, Polymer Engineering & Science, vol.40, issue.6, pp.38-965, 1998.
DOI : 10.1002/pen.10264

. W. Thorsen, Modification of the Cuticle and Primary Wall of Cotton by Corona Treatment, Textile Research Journal, vol.80, issue.55, pp.422-428, 1974.
DOI : 10.1177/004051756903900401

. T. Uehara and . Sakata, Effect of corona discharge treatment on cellulose prepared from beech wood, Journal of Applied Polymer Science, vol.41, issue.78, pp.41-1695, 1990.
DOI : 10.1002/app.1990.070410728

. M. Belgacem, . G. Czeremuszkin, . S. Sapieha, and . Gandini, A, Surface characterization of cellulose fibers by XPS and inverse gas chromatography, cellulose, pp.145-157, 1995.

. S. Dong, . S. Sapieha, and . H. Schreiber, Mechanical properties of corona-modified cellulose/polyethylene composites, polymer engineering and science, pp.343-346, 1993.

G. J. Gassan and . A. Bledzk, About the surface characteristics of natural fibres, Macromolecular Materials and Engineering, vol.283, issue.1, pp.132-139, 2000.
DOI : 10.1002/1439-2054(20001101)283:1<132::AID-MAME132>3.0.CO;2-B

. P. Bataille, . M. Dufourd, and . Sapeiha, Copolymerization of styrene on to cellulose activated by corona, Polymer International, vol.34, issue.4, pp.387-391, 1994.
DOI : 10.1002/pi.1994.210340406

R. M. Stefecka, . M. Cernak, . I. Hudec, . M. Mikula, and . Mazur, M, atmospheric-pressure plasma treatment of ultrahigh molecular polyethylene fibers, Journal of materials science letters, pp.18-2007, 1999.

. A. Pavlath and R. Slater, F, low temperature plasma chemistry, I. Shrink proofing of wool

B. R. Stone, Study Reveals Interesting Effects of Gas Plasma Radiations on Cotton Yarn, Textile Bull, vol.88, pp.65-68, 1962.

H. S. Sabharwal, . F. Denes, and Y. L. Nielsen, Free-radical formation in jute from argon plasma treatment, Journal of Agricultural and Food Chemistry, vol.41, issue.11, pp.412202-2207, 1993.
DOI : 10.1021/jf00035a072

D. A. Martin, R. R. , and M. L. , Mechanical behavior of cold plasma-treated sisal and high-density polyethylene composites, Polymer Composites, vol.61, issue.3, pp.464-474, 2003.
DOI : 10.1002/pc.10045

. S. Marais, . F. Gouanve, . A. Bonnesoeur, . J. Grenet, M. F. Poncin-epaillard et al., Unsaturated polyester composites reinforced with flax fibers: effect of cold plasma and autoclave treatments on mechanical and permeation properties, Composites Part A: Applied Science and Manufacturing, vol.36, issue.7, pp.36-975, 2005.
DOI : 10.1016/j.compositesa.2004.11.008

.. H. 100-sahin, Y. S. Manolache, and . Denes, Surface fluorination of paper in CF4-RF plasma environments, Cellulose, vol.9, issue.2, pp.171-181, 2002.
DOI : 10.1023/A:1020119109370

. C. Gilbert and . C. Ström, Adhesion between plasma-treated cellulosic materials and polyethylene, Surface and Interface Analysis, vol.17, pp.511-515, 2004.

. W. Walsh, R. W. Oraby, and . Processing, In: Handbook of Fiber Science and Technology: Volume II, Chemical Processing of Fibers and Fabrics, Functional Finishing, Part B. Dekker, p.44, 1984.

. E. Takács, . L. Wojnárovits, . J. Borsa, . J. Papp, . P. Hargittai et al., Modification of cotton-cellulose by preirradiation grafting, Nuclear Instruments and Methods in, Physics Research, pp.236-259, 2005.

. S. Kuzina and . A. Mikhailov, The oxidation and thermal transformations of macroradicals in gamma irradiated cellulose. Russ, J.Phys.Chem, vol.80, pp.1666-1670, 2006.

. E. Takács, . L. Wojnárovits, . J. Borsa, . Földváry, . Cs et al., Effect of -irradiation on cottoncellulose, Radiat. Phys .Chem, pp.55-663, 1999.

. E. Takács, . L. Wojnárovits, . C. Földváry, . P. Hargittai, . J. Borsa et al., Effect of combined gamma-irradiation and alkali treatment on cotton???cellulose, Radiation Physics and Chemistry, vol.57, issue.3-6, pp.399-403, 2000.
DOI : 10.1016/S0969-806X(99)00409-0

T. M. Sreekala, Effect of fibre surface modification on water-sorption characteristics of oil palm fibres, Composites Science and Technology, vol.63, issue.6, pp.861-869, 2003.
DOI : 10.1016/S0266-3538(02)00270-1

S. Borysiak, A study of transcrystallinity in polypropylene in the presence of wood irradiated with gamma rays Journal of Thermal Analysis and Calorimetry, pp.439-445, 2010.

K. R. Haydaruzzaman, . M. Khan, . A. Khan, and . M. Hossain, Effect of gamma radiation on the performance of jute fabrics-reinforced polypropylene composites, Radiation Physics and Chemistry, vol.78, issue.11, pp.78-986, 2009.
DOI : 10.1016/j.radphyschem.2009.06.011

. K. Kato, . V. Vasilets, . M. Meguro, . Y. Ikada, and . Nakamae, Surface oxidation of cellulose fibers by vacuum ultraviolet irradiation, Journal of Polymer Science Part A: Polymer Chemistry, vol.42, issue.3, pp.37-357361, 1999.
DOI : 10.1080/19447027.1951.10750260

. J. Gassan and . Gutowski, Effects of corona discharge and UV treatment on the properties of jute-fibre epoxy composites, Composites Science and Technology, vol.60, issue.15, pp.60-2857, 2000.
DOI : 10.1016/S0266-3538(00)00168-8

A. R. Oosterom and P. J. , Adhesion performance of UHMWPE after different surface modification techniques, Medical Engineering & Physics, vol.28, issue.4, pp.323-330
DOI : 10.1016/j.medengphy.2005.07.009

. J. Kolar, . M. Strlic, . S. Pentzien, . W. Kautek, and . Near-uv, visible and IR pulsed laser light interaction with cellulose, Appl. Phys, pp.71-87, 2000.

. J. Kolar, . M. Strlic, . D. Müller-hess, . A. Gruber, . K. Troschke et al., Near-UV and visible pulsed laser interaction with paper, Journal of Cultural Heritage, vol.1, pp.221-224, 2000.
DOI : 10.1016/S1296-2074(00)00149-7

. F. Liu, G. M. Wolcott, and R. , Characterization of the interface between cellulosic fibers and a thermoplastic matrix, Compos. Interfaces, issue.2, pp.419-432, 1994.

. C. Xing, Characterization of urea-formaldehyde resin efficiency affected by four factors in the manufacture of medium density fibre board, Thèse de doctorat, 2003.

J. D. Lange and . S. Shah, Analysis of surface roughness using confocal microscopy, Journal of Materials Science, vol.69, issue.14
DOI : 10.1007/BF00353195

.. 118-demarty, . F. Grillon, and . Jeulin, Study of the contact permeability between rough surfaces from confocal microscopy. Microscopy, microanalysis, microstructures, pp.505-511, 1996.

. N. Boeglin, . D. Masson, and . Pizzi, Interfacial mechanical bonding by SEM of wood and plastic composites, Holz als Roh-und Werk, pp.5448-53, 1996.
DOI : 10.1007/s001070050131

. K. Oksman and . Clemons, Mechanical properties and morphology of impact modified polypropylene-wood flour composites, Journal of Applied Polymer Science, vol.67, issue.9, pp.1503-1513, 1998.
DOI : 10.1002/(SICI)1097-4628(19980228)67:9<1503::AID-APP1>3.0.CO;2-H

M. M. Aranguren and R. M. , Composites Made from Lignocellulosics and Thermoset Polymers, Molecular Crystals and Liquid Crystals Science and Technology. Section A. Molecular Crystals and Liquid Crystals, vol.17, issue.1, pp.95-108, 2000.
DOI : 10.1016/0266-3538(91)90026-L

. R. Mahlberg, . L. Paajanen, . A. Nurmi, . A. Kivistö, and R. K. Koskela, Effect of chemical modification of wood on the mechanical and adhesion properties of wood fiber/polypropylene fiber and polypropylene/veener composites, Holz als Roh-und Werk, pp.319-326, 2001.

. M. Sreekala, . G. Jayamol, . M. Kumaran, and . Jabu, The mechanical performance of hybrid phenolformaldehyde-based composites reinforced with glass and oil palm fibres, Compos. Sci. Tech, pp.62-339, 2002.

. M. Smith, . H. Dai, and . Ramani, Wood???thermoplastic adhesive interface???method of characterization and results, International Journal of Adhesion and Adhesives, vol.22, issue.3, pp.197-204, 2002.
DOI : 10.1016/S0143-7496(01)00055-0

. X. Colom, . F. Carrasco, . P. Pagès, and . J. Canavate, Effects of different treatments on the interface of HDPE/lignocellulosic fiber composites, Composites Science and Technology, vol.63, issue.2, pp.161-169, 2003.
DOI : 10.1016/S0266-3538(02)00248-8

. M. Kazayawoko and M. J. Balatinecz, Surface modification and adhesion mechanisms in wood fiber-polypropylene composites, Journal of Materials Science, vol.34, issue.24, pp.6189-6199, 1999.
DOI : 10.1023/A:1004790409158

. M. Timar, . K. Maher, and M. M. Irle, Preparation of Wood with Thermoplastic Properties, Part 1. Classical Synthesis, Holzforschung, vol.35, issue.1, pp.5471-76, 2000.
DOI : 10.1515/hfsg.1981.35.5.253

. L. Matuana, . J. Balatinecz, and . R. Sodhi, Surface characterization of esterified cellulosic fibers by XPS and FTIR Spectroscopy, Wood Science and Technology, vol.35, issue.3, pp.191-201, 2001.
DOI : 10.1007/s002260100097

K. P. Jandura, Fibrous Long-Chain Organic Acid Cellulose Esters and their characterization by diffuse reflectance FTIR spectroscopy, solid state CP/MAS 13C-NMR and X-ray diffraction, J. App. Polym. Sci, pp.78-1354, 2000.

L. H. Schreiber, Overview of Inverse Gas Chromatography, ACS Symposium series American Chem. Soc, vol.1, pp.1-10, 1989.
DOI : 10.1021/bk-1989-0391.ch001

R. D. Kamdem, Inverse gas chromatography of lignocellulosic fibers coated with a thermosetting polymer: Use of peak maximum and conder and young methods, Journal of Colloid and Interface Science, vol.150, issue.2, pp.150507-516, 1992.
DOI : 10.1016/0021-9797(92)90219-C

. W. Beckert and . Lauke, Critical discussion of the single-fibre pull-out test: does it measure adhesion?, Composites Science and Technology, vol.57, issue.12
DOI : 10.1016/S0266-3538(97)00107-3

. J. Simonsen, . R. Jacobsen, and . Rowell, Wood-fiber reinforcement of styrene-maleic anhydride copolymers, Journal of Applied Polymer Science, vol.68, issue.10
DOI : 10.1002/(SICI)1097-4628(19980606)68:10<1567::AID-APP4>3.0.CO;2-F

. C. Kamoun, . A. Pizzi, and . Garcia, The effect of humidity on cross-linked and entanglement networking of formaldehyde-based wood adhesives. Holz als Roh-und Werk, pp.56235-243, 1998.

. C. Frazier and . Jianwen, On the occurrence of network interpenetration in the wood-isocyanate adhesive interphase, International Journal of Adhesion and Adhesives, vol.18, issue.2, pp.81-87, 1998.
DOI : 10.1016/S0143-7496(97)00048-1

. Park, W. B-d, and . A. Moffet, Medium density fibreboard bonded with cure-accelerated phenol-formaldehyde adhesives. Third European Panel Products Symposium, pp.77-88, 1999.

. N. Carneiro, . A. Souto, . E. Silva, . A. Marimba, . B. Tena et al., Dyeability of corona-treated fabrics, Coloration Technology, vol.12, issue.47, pp.117298-302, 2001.
DOI : 10.1111/j.1478-4408.1994.tb01603.x

. I. Sakata, . M. Morita, . N. Tsuruta, and . Morita, Activation of wood surface by corona treatment to improve adhesive bonding, Journal of Applied Polymer Science, vol.49, issue.7, pp.49-1251, 1993.
DOI : 10.1002/app.1993.070490714

. F. Garbassi, . M. Morra, and . L. Barino, Dynamics of macromolecules: A challenge for surface analysis, Surface and Interface Analysis, vol.100, issue.10
DOI : 10.1007/978-94-009-1361-5_18

. T. Ward and . H. Jung, Characterization and use of radio frequency plasma-activated natural polymers, Journal of Applied Polymer Science, vol.23, issue.7, pp.1987-2003, 1979.
DOI : 10.1002/app.1979.070230709

. Z. Zheng, . S. Tang, and . G. Zhou, A Study of the influence of controlled corona treatment on UHMWPE fibers in reinforced vinylester composites, Polymer. International, pp.52-1833, 2003.

Q. C. Wang, Two sided modification of wool fabrics by atmospheric pressure plasma jet: Influence of processing parameters on plasma penetration, Surface and Coatings Technology, vol.201, issue.14, pp.6273-6277, 2007.
DOI : 10.1016/j.surfcoat.2006.11.028

S. D. Sun, Fabric surface properties affected by low temperature plasma treatment, Journal of Materials Processing Technology, vol.173, issue.2, p.173172, 2006.
DOI : 10.1016/j.jmatprotec.2005.11.022

. A. Reiter, Compressive behaviour of softwood under uniaxial loading at different orientations to the grain, Mechanics of Materials, vol.33, issue.12, pp.705-715, 2001.
DOI : 10.1016/S0167-6636(01)00086-2

S. Sahoo, A. Nakai, M. Misra, A. K. Mohanty, and H. Hamada, Characterization of novel biocomposites developed through sandwich injection molding, International SAMPE Symposium and Exhibition (Proceedings), p.52

. P. Mutje, . A. Lopez, . M. Vallejos, and . J. Lopez, Full exploitation of cannabis stavia as reinforcement/filler of thermoplastic composite materials, Compo A: appl sci Manuf, pp.38369-77, 2007.

. A. Bledzki, . A. Jaszkiewicz, and . Scherzer, Mechanical properties of PLA composites with man-made celulose and abaca fibres, Composites : part A, pp.40-404, 2009.

. A. Bourmaud and . Pimbert, Investigations of mechanical properties of polypropylene and poly lactic acid reinforced by miscanthus fibers, Composites:part A, pp.39-1444, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00400214

T. A. Kelly, Tensile properties of fibre-reinforced metals: Copper/tungsten and copper/molybdenum, Journal of the Mechanics and Physics of Solids, vol.13, issue.6, pp.329-367, 1965.
DOI : 10.1016/0022-5096(65)90035-9

S. K. Garkhail, R. W. Heijenrath, and T. Peijs, Mechanical properties of natural-fibre-mat-reinforced thermoplastics based on flax fibres and polypropylene, Applied Composite Materials, vol.7, issue.5/6, pp.351-372, 2000.
DOI : 10.1023/A:1026590124038

.. G. 152-beckermann and . K. Pickering, Engineering and evaluation of hemp fibre reinforced polypropylene composites: Fibre treatment and matrix modification, Composites Part A: Applied Science and Manufacturing, vol.39, issue.6, pp.39979-988, 2008.
DOI : 10.1016/j.compositesa.2008.03.010

. S. Mukhopadhyay and . Fangueiro, Physical Modification of Natural Fibers and Thermoplastic Films for Composites ??? A Review, Journal of Thermoplastic Composite Materials, vol.11, issue.5, pp.135-162, 2009.
DOI : 10.1016/j.medengphy.2005.07.009

. K. Oksman and S. M. Skrifvars, Natural fibres as reinforcements in polylactic acid (PLA) composites. Compo sci technology, pp.1317-1324, 2003.

Y. E. Petinakis, E. G. Dean, . H. Liu, and . A. Scully, Effect of matrix particle interfacial adhesion on the mechanical properties of poly(actic acid)/wood flour micro composites, Journal of Polymers and the Environment, pp.17-83, 2009.

. P. Ganan and . Mondragon, Thermal and degradation behaviour of fique fiber reinforced thermoplastic matrix composites, Journal of Thermal Analysis and Calorimetry, vol.73, issue.3, pp.783-785, 2003.
DOI : 10.1023/A:1025830430267

J. K. , T. S. , P. C. , and . G. Groeninckx, The thermal and crystallisation studies of short sisal fibre reinforced polypropylene composites, pp.34253-266, 2003.

. P. Szabo, . G. Varheygi, and . Till, Thermogravimetric/mass spectrometric characterization of two energy crops, Arundo donax and Miscanthus sinensis, Journal of Analytical and Applied Pyrolysis, vol.36, issue.2, pp.36179-190, 1996.
DOI : 10.1016/0165-2370(96)00931-X

. B. Wielage, M. T. Lampke, . K. Nestler, and . Starke, Thermogravimetric and differential scanning calorimetric analysis of natural fibres and polypropylene, Thermochimica Acta, vol.337, issue.1-2, pp.169-177, 1999.
DOI : 10.1016/S0040-6031(99)00161-6

. A. Nada and . Hassan, Thermal behavior of cellulose and some cellulose derivatives, Polymer Degradation and Stability, vol.67, issue.1, p.111, 2000.
DOI : 10.1016/S0141-3910(99)00100-7

. B. Jiminez, . A. Juntaro, and . J. Bismarck, Effect of atmospheric air pressure plasma treatment on the thermal behaviour of naturals fibers and dynamical mechanical properties of randomly oriented short fibre composites, J. Biobased Materials and bioenergy, issue.2, pp.264-272, 2008.

. A. Nunez and R. J. Kenny, Thermal and dynamic mechanical characterization of polypropylene-woodflour composites, Polymer Engineering & Science, vol.15, issue.4, pp.733-742, 2002.
DOI : 10.1016/S0032-3861(98)00754-X

. M. Lopez-manchado and . Arroyo, Thermal and dynamic mechanical properties of polypropylene and short organic fiber composites, Polymer, vol.41, issue.21, pp.417761-7767, 2000.
DOI : 10.1016/S0032-3861(00)00152-X

J. P. , M. G. Groeninckx, and T. , S, Dynamic mechanical properties of short sisal fibre reinforced polypropylene composites Composites, pp.275-290, 2003.

. W. Qiu and E. F. Zhang, Effect of maleated polypropylene on the performance of polypropylene/cellulose composite, Polymer Composites, vol.71, issue.4, pp.448-453, 2005.
DOI : 10.1295/koron.56.166

. A. Awal, . S. Ghosh, and . Sain, Thermal properties and spectral characterization of wood pulp reinforced bio-composite fibers, Journal of Thermal Analysis and Calorimetry, vol.85, issue.2, pp.695-701, 2010.
DOI : 10.1016/S1359-835X(00)00098-1

C. «. Duplay and . Thèse-de-doctorat, Influence de la structure moléculaire sur la cinétique de cristallisation de polypropylènes en écoulement de cisaillement, 2001.

. Jay, Thèse de doctorat : Etude de la cristallisation de polypropylènes en écoulement ? Application a la modélisation du procédé d'extrusion de film a plat ? Propriétés mécaniques résultantes, 1996.

W. J. Araujo and D. Paoli, M.A, Thermal properties of high density polyethylene composites with naturak fibres: coupling agent effect, Polymer degradation and stability, pp.931770-1775, 2008.
URL : https://hal.archives-ouvertes.fr/hal-01669790

J. K. , T. S. , P. C. , . G. Groeninckx, and . M. Sarkissova, The thermal and crystallisation studies of short sisal fibre reinforced polypropyléne composites, Composites : Part A, pp.34-253, 2003.

C. Y. Mi, Bamboo fiber-reinforced polypropylene composites: Crystallization and interfacial morphology, Journal of Applied Polymer Science, vol.64, issue.7, p.1267, 1997.
DOI : 10.1002/(SICI)1097-4628(19970516)64:7<1267::AID-APP4>3.0.CO;2-H

. S. Bhattacharya and . V. Shembekar, Study of transcrystalline morphology of polypropylene in composites containing polypropylene and jute fibres, Macromolecular reports, pp.32485-498, 1995.

. S. Ouajai and . R. Shanks, A, Composition, structure and thermal degradation of hemp cellulose after chemical treatments, Polymer degradation and stability, pp.327-335, 2005.

. H. Krassig, Proceeding of the eighth cellulose conference, pp.777-90, 1975.

. R. Mandoza and . Thèse-de-doctorat, Morphologie induites dans les pièces en polymère moulées par injection, 2006.

. M. Kadota, . M. Cakmak, and . Hamada, Structural hierarchy developed in co-injection molded polystyrene/polypropylene parts, Polymer, vol.40, issue.11, p.403119, 1999.
DOI : 10.1016/S0032-3861(98)00472-8

J. Varga, Crystallization, melting and supermolecular structure of isotactic polypropylene Polypropylene: Structure, Blends and Composites, pp.56-115, 1995.

. A. Nalbandi, Kinetics of thermal degradation of polylactic acid under N 2 atmosphere, Polymer, vol.10, pp.371-376, 2001.

. A. Babanalbandi, ;. D. Hill, and . D. Hunter, Thermal stability of poly lactic acid before and after ? ? ? ? radiolysis, Polymer international, pp.48980-984, 1999.

D. T. Hapuarachcchi and . Peijs, Multiwalled carbon nanotubes and sepiolite nanoclays as flame retardants for polylactide and its natural fibre reinforced composites, Composites Part A: Applied Science and Manufacturing, vol.41, issue.8, pp.41-954, 2010.
DOI : 10.1016/j.compositesa.2010.03.004

. P. Gatenholm and . Chihani, Proceedings of the international workshop on frontiers of surface modifications and characterization of lignocellulosic fibers, Sweden, 1996.

. S. Cheng, . K. Lau, . T. Liu, . Y. Zhao, and . P. Lam, Mechanical and thermal properties of chiken feather fiber/PLA green composites, Compo: part B, pp.40650-654, 2009.

. M. Pyda, . Bopp, . Rc, and . Wunderlich, Heat capacity of poly(lactic acid), The Journal of Chemical Thermodynamics, vol.36, issue.9, pp.731-773, 2004.
DOI : 10.1016/j.jct.2004.05.003

R. Ak, M. Bc, . Banerje, and . An, Short jute fibre reinforced polypropylene composites: dynamic mechanical study, J. Appld Polym Sci, pp.71-531, 1999.