ces fonctionnalités sont accessibles à l'aide du seul module sans besoin de recompiler ou de retoucher au code source du logiciel, p.90 ,
Application of fuzzy control logic for dead-time processes in a glass melting furnace, Fuzzy Sets and Systems, vol.38, issue.3, pp.251-265, 1990. ,
DOI : 10.1016/0165-0114(90)90200-P
Réalisation d'un environnement graphique avec base de données pour l'analyse et la simulation de réseaux électriques, p.115, 1994. ,
Méthodes de commande du moteur asynchrone pour un cahier de charge précis, p.27, 1995. ,
Commande vectorielle d'une machine asynchrone à enroulements de mesure de f.e.m, p.76, 1995. ,
A field oriented control method using decoupling terms for induction motors, Proc. 2 nd EPE Chapter symposium on electric drive design and applications, pp.4-6147, 1996. ,
Régulation floue de la vitesse dans une commande vectorielle de la machine asynchrone par orientation du flux rotorique, LFA'96 Rencontres Francophones sur la logique floue et ses Applications, pp.4-540, 1996. ,
Modelling rotor cage induction motors for fault detection, Proc. IEEE-SDEMPED'97, pp.1-3, 1997. ,
Comparison between fuzzy and classical speed control within a field oriented method for induction motors, Proc. EPE'97, pp.444-446, 1997. ,
Neuro-Fuzzy Controller in a Field Oriented Control for Induction Motors, Proc. EPE'97, pp.1-096, 1997. ,
DOI : 10.1007/978-3-662-11131-4
Défauts rotoriques de la machine asynchrone; Modèles pour le diagnostic, Proc. AGIS'97, p.11 ,
A stator flux oriented drive for an induction motor with extra (??, ??) coils, IECON '98. Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society (Cat. No.98CH36200), pp.2522-2526, 1998. ,
DOI : 10.1109/IECON.1998.724125
Optimisation of the electric vehicle drive system control strategy using global system approach, Proc. ICEM'94, pp.341-346, 1994. ,
Comparaison de m??thodes d'identification des param??tres d'une machine asynchrone, The European Physical Journal Applied Physics, vol.3, issue.1, pp.71-80, 1998. ,
DOI : 10.1051/epjap:1998206
Field oriented control of high-power motor drives by Kalman filter flux observation, Proc. EPE'91, pp.182-184, 1991. ,
A fully digitized field-oriented controlled induction motor drive using only current sensors, IEEE Transactions on Industrial Electronics, vol.39, issue.3, pp.3-241, 1992. ,
DOI : 10.1109/41.141626
Contribution à l'étude de la commande d'un système de type pont roulant, Comparaison expérimentale des méthodes analytiques et floues, 1995. ,
Transient and steady-state analysis of induction motors with cage faults, Proc. IMACS-CESA'98, pp.1-4, 1998. ,
Practical considerations for sensorless induction motor drive system, IECON '98. Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society (Cat. No.98CH36200), pp.1002-1007, 1998. ,
DOI : 10.1109/IECON.1998.724231
A review of induction motors signature analysis as a medium for faults detection, IECON '98. Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society (Cat. No.98CH36200), pp.1950-1955, 1998. ,
DOI : 10.1109/IECON.1998.724016
The principle of field orientation as applied to the new transvektor closed-loop control system for rotating-field machines, Siemens Review, pp.217-220, 1972. ,
Speed sensorless hybrid vector controlled induction motor drive, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting, pp.137-143, 1995. ,
DOI : 10.1109/IAS.1995.530294
Modelling of induction motor accounting for skewed slots effects, Proc. ICEM'94, pp.699-704, 1994. ,
Réglages échantillonnés, Traitement par la transformation en Z, Presses Polytechniques Romandes, p.382 ,
Réglages par logique floue, Presses Polytechniques RomandesIdentification and control of induction motor stator currents using fast online random training of a neural network, IEEE Trans. Ind. Applicat, vol.33, pp.181-97, 1994. ,
Modélisation et commande de la machine asynchrone, p.279, 1995. ,
An A.C. drive system for electrical vehicles, Proc. ICEM'94, pp.831-834, 1994. ,
URL : https://hal.archives-ouvertes.fr/pasteur-00721358
Non-linear system identification using neural networks, International Journal of Control, vol.49, issue.6, pp.6-1191, 1990. ,
DOI : 10.1007/978-1-4684-7888-4
Fuzzy controller design by using neural network techniques, IEEE Transactions on Fuzzy Systems, vol.2, issue.3, pp.235-244, 1994. ,
DOI : 10.1109/91.298452
Fuzzy logic and neural network handbook, 1996. ,
Conception et réalisation d'une commande robuste de machine asynchrone, 1997. ,
Sensorless position detection for vector-controlled induction motor drives using an asymmetric outer-section cage, IEEE Trans. Indus. Appli, vol.33, pp.5-1162, 1997. ,
Control of a shaftsensorless position induction motor using an asymmetric outer-section cage, Proc. EPE'97, pp.8-10, 1997. ,
Digital vector control of induction machine using a PWM inverter, Proc. EPE'91, pp.227-229 ,
The universal field oriented controller, IEEE Trans. Indus. Appli, vol.30, issue.1, pp.92-100, 1994. ,
Self-tuning of tapped stator winding induction motor servo drives using the universal field-oriented controller, IEEE Trans. Power Electron, vol.9, pp.4-357, 1994. ,
Backpropagation neural nets with one and two hidden layers, IEEE Transactions on Neural Networks, vol.4, issue.1, pp.136-141, 1992. ,
DOI : 10.1109/72.182704
Wide bandwidth flux, position and velocity estimation in AC machines at any speed ( including zero ) using multiple saliencies, Proc. EPE'97, pp.8-10, 1997. ,
A low cost digital field oriented control system for an induction actuator, Proc. IMACS ? TC1'90, pp.19-2131, 1990. ,
Comparative study of different control strategies for the induction machine in automotive applications with on board energy, Proc. ICEM'94, pp.156-161, 1994. ,
Magnetic Flux Estimator with Automatic Correction of Drift Distortion, The Scientific Works and Studies of the University of Zilina, Electrotechnical Series, Slovak Republic, pp.5-15, 1998. ,
The causes and quantification of sideband currents for use in rotor fault detection systems for cage induction motors, Proc. ICEM'96, pp.414-419, 1996. ,
Analysis of airgap flux, current and vibration signals as a function of the combination of static and dynamic airgap eccentricity in 3-phase induction motors, IEEE Trans. on Industry Applications, vol.33, pp.1-24, 1997. ,
Commande vectorielle directe de la machine asynchrone : estimation de flux et de vitesse, p.46, 1994. ,
Application of Kalman filters and extended Luenberger observers in induction motor drives, Proc. Intelligent Motion, pp.369-387, 1994. ,
Real-time DSP implementation of an extended observer in a high-dynamic performance induction motor drive, Proc. EPE'95, 1995. ,
Survey of speed sensorless controls for IM drives, Proc. IECON'98, pp.1018-1023, 1998. ,
Ancillary techniques for neural network applications, IEEE International Conf. On Neural Networks, pp.3724-3729, 1994. ,
Intelligent control for high performance drives, Proc. IEEE International Electric Machines and Drives Conf, pp.2-3, 1997. ,
Contribution à l'identification et à la commande vectorielle des machines asynchrones, Thèse de Doctorat de l'INP de Lorraine, 1995. ,
URL : https://hal.archives-ouvertes.fr/tel-01751587
Impact of speed ripple on rotor fault diagnosis of induction machines, Proc. ICEM'96, pp.452-457, 1996. ,
AI techniques in induction machines diagnosis including the speed ripple effect, IEEE Trans. Indus. Appli, vol.34, pp.1-98, 1998. ,
La régulation industrielle, régulateur PID, prédictif et flous, p.349, 1994. ,
About the gain choice of flux observer in induction servo-motors, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting, pp.601-606 ,
DOI : 10.1109/IAS.1990.152247
Commande vectorielle des machines à courant alternatif, Etude des problèmes liés à la numérisation des régulateurs, 1995. ,
Fuzzy equivalence of classical controllers, Proc. EUFIT'93, pp.1567-1573, 1993. ,
Fuzzy controllers: synthesis and equivalences, IEEE Transactions on Fuzzy Systems, vol.3, issue.2, pp.140-148, 1995. ,
DOI : 10.1109/91.388169
Comparing the indirect fieldoriented control with a scalar method, IEEE Trans. on Industrial Electronics, vol.41, pp.2-201, 1994. ,
Application of neural networks to industrial and commercial power systems : A tutorial overview, IEEE Trans. Indus. Appli, vol.33, pp.5-1355, 1997. ,
The detection of rotor defects in induction motors, Proc. ICEM-Design and Application, pp.216-220, 1982. ,
Fuzzy logic control optimization of electrical systems using experimental designsOn evaluating robustness of fuzzy logic controllers through Taguchi methodology, Proc. EPE'97 Proc. IECON'98, pp.8-10, 1997. ,
Decoupling control of induction motor drives, IEEE Transactions on Industrial Electronics, vol.35, issue.2, pp.2-253, 1988. ,
DOI : 10.1109/41.192657
Methods for speed sensorless control of AC drives, Proc. IEEE PCC-Yokohama, pp.415-420, 1993. ,
Sensorless position control of induction motors ? an emerging technology, Proc. IECON'98, pp.1-12, 1998. ,
Zero-speed tacholess IM torque control: simply a matter of stator voltage integration, IEEE Transactions on Industry Applications, vol.34, issue.4, pp.790-795, 1998. ,
DOI : 10.1109/28.703975
Comparison of different schemes without shaft sensors for field oriented control drives, Proceedings of IECON'94, 20th Annual Conference of IEEE Industrial Electronics, pp.1579-1588 ,
DOI : 10.1109/IECON.1994.398050
Direct self-control (DSC), a novel method of controlling asynchronous machines in traction applications, Proc. EPE'89, pp.75-81 ,
Observer-based direct field orientation: analysis and comparison of alternative methods, IEEE Transactions on Industry Applications, vol.30, issue.4, pp.945-953, 1994. ,
DOI : 10.1109/28.297911
Transducerless position and velocity estimation in induction and salient AC machines, IEEE Transactions on Industry Applications, vol.31, issue.2, pp.240-247, 1995. ,
DOI : 10.1109/28.370269
Transducerless field orientation concepts employing saturation-induced saliencies in induction machines, IEEE Transactions on Industry Applications, vol.32, issue.6, pp.1380-1393, 1996. ,
DOI : 10.1109/28.556642
Positionnement d'une machine asynchrone par la méthode du flux orienté, Thèse de Doctorat de l'INP de Toulouse, 1991. ,
Les réseaux de neurones; principes et définition, Hermes, p.124, 1994. ,
Sensorless vector control of induction machines with stator voltage offset compensation, Proc. EPE'97, pp.4-508, 1997. ,
Improved direct torque and flux vector control of PWM inverter-fed induction motor drives, IEEE Transactions on Industrial Electronics, vol.42, issue.4, pp.344-349, 1991. ,
DOI : 10.1109/41.402472
The existence of large inter-bar currents in three phase squirrel cage motors with rotor-bar and/or end-ring faults, IEEE Trans. on Power Apparatus and System, vol.103, pp.7-1854, 1984. ,
Méthodologies de régulation numérique incluant la logique floue, Thèse de Doctorat de l'INSA de Toulouse, 1992. ,
Machines asynchrone : ses modèles, son identification et sa commande, Thèse de Doctorat de l'INP de Lorraine, 1995. ,
Stability analysis of fuzzy control systems using facet functions, Fuzzy Sets and Systems, vol.70, issue.2-3, pp.135-156, 1992. ,
DOI : 10.1016/0165-0114(94)00222-S
Speed sensorless vector control of highspeed induction motors using intelligent control algorithm, Proc. IECON'98, pp.888-892, 1998. ,
The application of fuzzy control systems to industrial processes, Automatica, vol.13, issue.3, pp.235-242, 1977. ,
DOI : 10.1016/0005-1098(77)90050-4
Noninvasive detection of broken rotor bars in operating induction motors, IEEE Transactions on Energy Conversion, vol.3, issue.4, pp.4-873, 1988. ,
DOI : 10.1109/60.9364
Speed estimator for induction motor drives using an artificial neural networkStator-flux-oriented sensorless induction motor drive for optimum low-speed performance, Proc. IEEE International Electric Machines and Drives Conf, pp.5-1170, 1997. ,
Mod??lisation et commande vectorielle d'un moteur asynchrone satur?? avec contr??le dynamique du flux, Journal de Physique III, vol.1, issue.9, pp.1509-1528, 1991. ,
DOI : 10.1051/jp3:1991208
30 years space vectors, 20 years field orientation, 10 years digital signal processing with controlled AC-drives, a review ( Part 1 ), EPE Journal, vol.1, pp.1-13, 1991. ,
30 years space vectors, 20 years field orientation, 10 years digital signal processing with controlled AC-drives, a review ( Part 2 ), EPE Journal, vol.1, pp.2-89, 1991. ,
Control of electrical drives, p.420, 1996. ,
Introduction à l'électrotechnique approfondie, Technique et Documentation, p.247, 1981. ,
Microprocessor-Controlled AC-Servo Drives with Synchronous or Induction Motors: Which is Preferable?, IEEE Transactions on Industry Applications, vol.22, issue.5, pp.1-22, 1986. ,
DOI : 10.1109/TIA.1986.4504798
Control of indirect field-oriented induction motor drives considering the effects of dead-time and parameter variations, IEEE Transactions on Industrial Electronics, vol.40, issue.5, pp.486-495, 1986. ,
DOI : 10.1109/41.238017
Application of fuzzy algorithms for control of simple dynamic plant, Proceedings of the Institution of Electrical Engineers, vol.121, issue.12, pp.1585-1588, 1974. ,
DOI : 10.1049/piee.1974.0328
An experiment in linguistic synthesis with a fuzzy logic controller, International Journal of Man-Machine Studies, vol.7, pp.311-323, 1975. ,
Advances in the linguistic synthesis of fuzzy controllers, International Journal of Man-Machine Studies, vol.8, issue.6, pp.325-334, 1976. ,
DOI : 10.1016/S0020-7373(76)80028-4
Comparison of rotor flux estimation in induction motors with a nonlinear observer and the extended Kalman filter, Proc. IECON'94, pp.2149-2154 ,
Analysis of squirrel cage induction motors with broken rotor bars, Proc. ICEM'96, pp.19-23, 1996. ,
Optimized fuzzy logic controller parameters for open-loop stable or evolutive electromechanical systems, IECON '98. Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society (Cat. No.98CH36200), pp.23-27, 1998. ,
DOI : 10.1109/IECON.1998.723938
Existance possible de décharges partielles dans l'isolation statorique des moteurs asynchrones basse tension alimentés par onduleur MLI, Proc. JCGE'96, pp.262-265, 1996. ,
A logical calculus of the ideas immanent in nervous activity, The Bulletin of Mathematical Biophysics, vol.5, issue.4, pp.115-133, 1943. ,
DOI : 10.1007/BF02478259
Reconstitution du flux rotorique pour la commande vectorielle des moteurs asynchrones, Journées de la SEE Groupe Nord, 2 Déc, p.20, 1992. ,
Fuzzy control for electrical drives ?, Proc. EPE'97, pp.8-10, 1997. ,
Neural networks for control, p.524, 1996. ,
Fuzzy controller for inverter fed induction machines, IEEE Transactions on Industry Applications, vol.30, issue.1, pp.78-84, 1994. ,
DOI : 10.1109/28.273624
Fuzzy logic control of an V/f PWM inverter-fed drive, Proc. ICEM'94, pp.12-17, 1994. ,
Decoupling control of secondary flux and secondary current in induction motor drive with controlled voltage source and its comparaison with volt/hertz controlSensorless speed control of induction motor drives using observer based vector control, Proc. ICEM'92, pp.1-21, 1985. ,
Robust speed identification for speed sensorless vector control of induction motors, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting, pp.1234-1240, 1994. ,
DOI : 10.1109/IAS.1993.298958
Introduction to neural networksComparaison et synthèse des procédés de commande vectorielle Application des réseaux neuronaux à la commande en vitesse d'une charge mécanique entraînée par machine asynchrone, Thèse de Doctorat de l'Université des Sciences et Technologies de Lille, pp.168-186, 1992. ,
Application of genetic algorithms to motor parameter determination for transient torque calculations, IEEE Transactions on Industry Applications, vol.33, issue.5, pp.1273-1282, 1997. ,
DOI : 10.1109/28.633806
Popov-type stability analysis method for fuzzy control system, Proc. EUFIT'97, pp.8-11, 1997. ,
Comparison of universal field oriented ( UFO ) controllers in different reference frames, Proc. EPE'91, pp.4-689, 1991. ,
Sensorless Control of AC Motor- Drives, p.498, 1996. ,
Conception d'une commande floue pour une boucle de régulation, 1993. ,
Neuro-Fuzzy speed control of an induction motor, Proc. IMACS-CESA'98, pp.1-4, 1998. ,
Adaptive Neuro-Fuzzy Speed Control of an Induction Motor, Proc. PEMC'98 Algorithmes génétiques et réseaux de neurones, pp.34-39, 1995. ,
Commande floue et domotique, Proc. Journées, pp.29-30, 1998. ,
Dynamic model of three-phase squirrel cage induction motors with rotor faults, Proc. ICEM'94, pp.694-698, 1994. ,
Contr??le d'une machine asynchrone par estimation robuste de la vitesse, Journal de Physique III, vol.2, issue.3, pp.439-453, 1992. ,
DOI : 10.1051/jp3:1992140
Fuzzy logic based multi-model field oriented control of induction motors, Proc. IMACS-CESA'98, pp.1-4, 1998. ,
Functional equivalence between radial basis function networks and fuzzy inference systems, IEEE Transactions on Neural Networks, vol.4, issue.1, pp.156-159, 1993. ,
DOI : 10.1109/72.182710
La commande vectorielle du moteur asynchrone : aspects pédagogiques, p.12, 1992. ,
Electric vehicle with robust sensorless induction motor drive, Proc. ICEM'94, pp.338-340, 1994. ,
Models for induction motors with air-gap asymmetry for diagnostic purposes, Proc. ICEM'96, pp.79-84, 1996. ,
Probabilistic neural networks and general regression neural networks," in Fuzzy logic and neural network handbook, pp.3-4, 1996. ,
Field oriented and field acceleration control for induction motors: Is there a difference?, Proceedings IECON '91: 1991 International Conference on Industrial Electronics, Control and Instrumentation, pp.567-572 ,
DOI : 10.1109/IECON.1991.239223
Radial basis neural network adaptive controller for servomotor, Proc. ISIE'93, pp.747-752, 1993. ,
Fuzzy-neural control of variable-speed AC drives, Proc. Intelligent Motion, pp.117-129, 1995. ,
Derivation of Fuzzy Control Rules from Human Operator's Control Actions, Proc. IFAC Symp. On Fuzzy Information, Knowledge Representation and Decision Analysis, pp.55-60, 1983. ,
DOI : 10.1016/S1474-6670(17)62005-6
A New Quick-Response and High-Efficiency Control Strategy of an Induction Motor, Proc. IEEE IAS Ann, pp.496-502, 1985. ,
DOI : 10.1109/TIA.1986.4504799
Stability analysis and design of fuzzy control systems, Fuzzy Sets and Systems, vol.45, issue.2, pp.135-156, 1992. ,
DOI : 10.1016/0165-0114(92)90113-I
On-line current monitoring to diagnose airgap eccentricity-an industrial case history of a large high-voltage three-phase induction motor, 1997 IEEE International Electric Machines and Drives Conference Record, pp.1-3, 1997. ,
DOI : 10.1109/IEMDC.1997.604066
Dual-DSP sensorless speed control of an induction motor with adaptive voltage compensation, Proc. PESC'96, pp.351-357, 1996. ,
Vector control of AC machines, p.332, 1990. ,
Parameter estimation, condition monitoring and diagnosis of electrical machines, p.360, 1993. ,
Transient modelling oriented to diagnostics of induction machines with rotor asymmetries, Proc. ICEM'94, pp.62-67, 1994. ,
Artificial neural network based control of electromechanical systems, International Conference on Control '94, pp.21-24, 1994. ,
DOI : 10.1049/cp:19940283
A fuzzy-controlled speed-sensorless induction motor drive with flux estimators, Seventh International Conference on Electrical Machines and Drives, pp.11-13, 1995. ,
DOI : 10.1049/cp:19950886
Practical improvement of a simple V-I flux estimator for sensorless F.O. controllers operating in the low speed region, Proc. IECON'98, pp.1615-1620, 1998. ,
Optimal design of PID process controllers based on genetic algorithms, Control Engineering Practice, vol.2, issue.4, pp.641-648, 1994. ,
DOI : 10.1016/0967-0661(94)90008-6
Extended state estimation of nonlinear modeled induction machines, PESC `92 Record. 23rd Annual IEEE Power Electronics Specialists Conference, pp.271-278, 1992. ,
DOI : 10.1109/PESC.1992.254662
A PCMCIA DSP-card to boost inverter performance : sensorless drive control via extended Kalman filter, Proc. EPE'97, pp.4-498, 1997. ,
Analog VLSI hardware for fuzzy systems, IECON '98. Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society (Cat. No.98CH36200), pp.52-55, 1998. ,
DOI : 10.1109/IECON.1998.723943
A stator flux oriented induction machine drive, PESC '88 Record., 19th Annual IEEE Power Electronics Specialists Conference, pp.870-876, 1988. ,
DOI : 10.1109/PESC.1988.18219
Implementation of direct stator flux orientation control on a versatile DSP based system, IEEE Trans. Indus. Appli, vol.27, pp.4-694, 1991. ,
Contribution à la surveillance et du diagnostic des machines électriquesFuzzy Sets, Thèse Systèmes asservis : commande et régulation, pp.338-353, 1965. ,
A direct fieldoriented controller for induction motor drives using tapped stator windings, IEEE Trans. Power Electron, vol.5, pp.4-446, 1990. ,
Start up of a global direct torque control system, PESC Record. 27th Annual IEEE Power Electronics Specialists Conference, pp.370-374 ,
DOI : 10.1109/PESC.1996.548606