A. Résultats-expérimentaux-sur-bagues-instrumentées and .. , 167 A.10.1 Variation de la pression de serrage générée par la bague moyenne, p.167

B. D. Adams and D. A. Crane, Finite element micromechanical analysis of a unidirectional composite including longitudinal shear loading, Computers & Structures, vol.18, issue.6, pp.63-68, 1984.
DOI : 10.1016/0045-7949(84)90160-3

D. H. Allen and J. G. Boyd, Convergence rates for computational predictions of stiffness loss in metal matrix composites. Composite materials and structures, pp.31-45, 1993.

H. Andra, O. Hesebeck, and E. L. Juhasz, Simulation of thermomechanical behavior of shape memory alloys under multiaxial non-proportional stress, Journal of Applied Mathematics and Mechanics, vol.81, pp.329-330, 2001.

W. D. Armstrong and T. Lorentzen, The self-thermal-plastic response of NiTi shape memory alloy fiber actuated metal matrix composites, International Journal of Solids and Structures, vol.38, issue.38-39, pp.7029-7044, 2001.
DOI : 10.1016/S0020-7683(00)00410-8

L. Bataillard, Transformation martensitique multiple dans un alliage à mémoire de forme NiTi

M. Berveiller and A. Zaoui, An extension of the self-consistent scheme to plastically-flowing polycrystals, Journal of the Mechanics and Physics of Solids, vol.26, issue.5-6, pp.325-344, 1979.
DOI : 10.1016/0022-5096(78)90003-0

K. Bhattacharya, Microstructure of martensite, 2003.

D. Bollas, P. Pappas, J. Parthenios, and C. Galiotis, Stress generation by shape memory alloy wires embedded in polymer composites, Acta Materialia, vol.55, issue.16, pp.5489-5499, 2007.
DOI : 10.1016/j.actamat.2007.06.006

M. Bosiers, K. Deloose, J. Verbist, and E. P. Peeters, Present and future of endovascular sfa treatment : Stents, stent-grafts, drug coated balloons and drug coated stents, Journal of Cardiovascular Surgery, vol.49, issue.2, pp.159-165, 2008.

J. G. Boyd and D. C. Lagoudas, Thermomechanical Response of Shape Memory Composites, Journal of Intelligent Material Systems and Structures, vol.24, issue.123, pp.333-346, 1994.
DOI : 10.1016/0020-7225(84)90033-8

L. C. Brinson and R. Lammering, Finite element analysis of the behavior of shape memory alloys and their applications, International Journal of Solids and Structures, vol.30, issue.23, pp.3261-3280, 1993.
DOI : 10.1016/0020-7683(93)90113-L

D. S. Burton, X. Gao, and L. C. Brinson, Finite element simulation of a self-healing shape memory alloy composite, Mechanics of Materials, vol.38, issue.5-6, pp.525-537, 2006.
DOI : 10.1016/j.mechmat.2005.05.021

F. Calkins and G. Butler, Subsonic Jet Noise Reduction Variable Geometry Chevron, 42nd AIAA Aerospace Sciences Meeting and Exhibit, 2004.
DOI : 10.2514/6.2004-190

M. G. Castellano, M. Indirli, A. Martelli, J. Azevedo, G. Sincraian et al., Seismic protection of cultural heritage using shape memory alloy devices -an EC funded project (ISTECH) Proceedings of the Post-Smirt Conference Seminar on Seismic Isolation, Passive Energy Dissipation and Active Control of Vibrations of Structures, p.417, 1999.

J. L. Chaboche, P. Kanouté, and E. A. Roos, On the capabilities of mean-field approaches for the description of plasticity in metal matrix composites, International Journal of Plasticity, vol.21, issue.7, pp.1409-1434, 2005.
DOI : 10.1016/j.ijplas.2004.07.001

L. C. Chang and T. A. Read, Institute of Metals Division -Plastic Deformation and Diffusionless Phase Changes in Metals-The Gold-Cadmium Beta Phase, Transactions AIME, vol.189, p.47, 1952.

Y. Chemisky, Modélisation du comportement macroscopique des Alliages à Memoire de Forme - Applications aux matériaux composites, Thèse de doctorat, pp.67-70, 2009.

Y. Chemisky, A. Duval, B. Piotrowski, T. B. Zineb, V. Tahiri et al., Numerical tool for SMA material simulation: application to composite structure design, Smart Materials and Structures, vol.18, issue.10, pp.1-2
DOI : 10.1088/0964-1726/18/10/104012

Y. Chemisky, B. Piotrowski, T. B. Zineb, and E. E. Patoor, Numerical study of mean-field approach capabilities for shape memory alloys matrix composites description, ESOMAT 2009, 8th European Symposium on Martensitic Transformations, pp.136-139, 2009.
DOI : 10.1051/esomat/200903004

M. Cherkaoui, Q. P. Sun, and G. Q. Song, Micromechanics modeling of composite with ductile matrix and shape memory alloy reinforcement, International Journal of Solids and Structures, vol.37, issue.11, pp.1577-1594, 2000.
DOI : 10.1016/S0020-7683(98)00332-1

C. Collard, T. B. Zineb, E. Patoor, and M. O. Salah, Micromechanical analysis of precipitate effects on shape memory alloys behaviour, Materials Science and Engineering: A, vol.481, issue.482, pp.481-482366, 2008.
DOI : 10.1016/j.msea.2007.05.112

A. Duval, Modélisation du comportement thermomécanique d'alliages à mémoire de forme Application au dimensionnement de microsystèmes et extension en non local, Thèse de doctorat, pp.67-70, 2009.

P. B. Entchev and D. C. Lagoudas, Modeling porous shape memory alloys using micromechanical averaging techniques, Mechanics of Materials, vol.34, issue.1, pp.1-24, 2002.
DOI : 10.1016/S0167-6636(01)00088-6

URL : http://smart.tamu.edu/publications/docs/Papers/2002/Modeling_Porous.pdf

J. D. Eshelby, Elastic Inclusions and Inhomogeneities, Progress in Solid Mechanics, p.89, 1961.
DOI : 10.1007/1-4020-4499-2_26

X. Gao, M. Huang, and L. C. Brinson, A multivariant micromechanical model for SMAs Part 1. Crystallographic issues for single crystal model, International Journal of Plasticity, vol.16, issue.10-11, pp.1345-1369, 2000.
DOI : 10.1016/S0749-6419(00)00013-9

D. S. Grummon, J. A. Shaw, and E. J. Foltz, Fabrication of cellular shape memory alloy materials by reactive eutectic brazing using niobium, Materials Science and Engineering: A, vol.438, issue.440, pp.438-440, 2006.
DOI : 10.1016/j.msea.2006.03.113

J. D. Harrison and P. Alto, Heat recoverable nickel/titanium alloy with improved stability and machinability. United State Patent 4, pp.90-104, 1982.

X. M. He and L. J. Rong, DSC analysis of reverse martensitic transformation in deformed Ti???Ni???Nb shape memory alloy, Scripta Materialia, vol.51, issue.1, pp.7-11, 2004.
DOI : 10.1016/j.scriptamat.2004.03.027

X. M. He, L. J. Rong, D. S. Yan, and Y. Y. Li, TiNiNb wide hysteresis shape memory alloy with low niobium content, Materials Science and Engineering: A, vol.371, issue.1-2, pp.193-197, 2004.
DOI : 10.1016/j.msea.2003.11.044

X. M. He, L. Z. Zhao, S. W. Duo, R. F. Zhang, and L. J. Rong, Stress-induced martensitic transformation in (N i 47 T i 44 ) 100?x N b x shape memory alloys with wide hysteresis. The Transactions of Nonferrous Metals Society of China, pp.42-46, 2006.

X. M. He, L. Z. Zhao, S. F. Zhang, S. W. Duo, and R. F. Zhang, Study of the thermal physical properties of Ti47Ni44Nb9 wide hysteresis shape memory alloy, Materials Science and Engineering: A, vol.441, issue.1-2, pp.167-169, 2006.
DOI : 10.1016/j.msea.2006.08.016

A. V. Hershey, The elasticity of an isotropic aggregate of anisotropic cubic crystals, Journal of Applied Mechanics, vol.21, pp.236-240, 1954.

R. Hill, The Elastic Behaviour of a Crystalline Aggregate, Proceedings of the Physical Society, 1952.
DOI : 10.1088/0370-1298/65/5/307

R. Hill, Continuum micro-mechanics of elastoplastic polycrystals, Journal of the Mechanics and Physics of Solids, vol.13, issue.2, pp.89-101
DOI : 10.1016/0022-5096(65)90023-2

R. Hill, A self-consistent mechanics of composite materials, Journal of the Mechanics and Physics of Solids, vol.13, issue.4, pp.213-222
DOI : 10.1016/0022-5096(65)90010-4

M. Huang and L. C. Brinson, A Multivariant model for single crystal shape memory alloy behavior, Journal of the Mechanics and Physics of Solids, vol.46, issue.8, pp.1379-1409, 1998.
DOI : 10.1016/S0022-5096(97)00080-X

J. W. Hutchinson, Bounds and Self-Consistent Estimates for Creep of Polycrystalline Materials, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.348, issue.1652, 1976.
DOI : 10.1098/rspa.1976.0027

G. B. Kauffman and I. Mayo, The Story of Nitinol: The Serendipitous Discovery of the Memory Metal and Its Applications, The Chemical Educator, vol.2, issue.2, pp.1-21, 1996.
DOI : 10.1007/s00897970111a

M. Kawai, Effects of matrix inelasticity on the overall hysteretic behavior of TiNi-SMA fiber composites, International Journal of Plasticity, vol.16, issue.3-4, pp.263-282, 2000.
DOI : 10.1016/S0749-6419(99)00054-6

E. Kröner, Berechnung der elastischen Konstanten des Vielkristalls aus den Konstanten des Einkristalls, Zeitschrift f???r Physik, vol.151, issue.4, pp.504-518, 1958.
DOI : 10.1007/BF01337948

E. Kröner, Zur plastischen verformung des vielkristalls, Acta Metallurgica, vol.9, issue.2, pp.155-161, 1961.
DOI : 10.1016/0001-6160(61)90060-8

S. Leclercq and C. Lexcellent, A general macroscopic description of the thermomechanical behavior of shape memory alloys, Journal of the Mechanics and Physics of Solids, vol.44, issue.6, pp.953-980, 1996.
DOI : 10.1016/0022-5096(96)00013-0

H. C. Lin, S. K. Wu, T. S. Chou, and H. P. Kao, The effects of cold rolling on the martensitic transformation of an equiatomic TiNi alloy, Acta Metallurgica et Materialia, vol.39, issue.9, pp.2069-2084, 1991.
DOI : 10.1016/0956-7151(91)90177-3

Y. Liu and D. Favier, Stabilisation of martensite due to shear deformation via variant reorientation in polycrystalline NiTi, Acta Materialia, vol.48, issue.13, pp.3489-3499, 2000.
DOI : 10.1016/S1359-6454(00)00129-4

Y. Liu, A. Mahmud, F. Kursawe, and T. H. Nam, Effect of pseudoelastic cycling on the Clausius???Clapeyron relation for stress-induced martensitic transformation in NiTi, Journal of Alloys and Compounds, vol.449, issue.1-2, pp.82-87, 2008.
DOI : 10.1016/j.jallcom.2006.02.080

Y. Liu and G. S. Tan, Effect of deformation by stress-induced martensitic transformation on the transformation behaviour of NiTi, Intermetallics, vol.8, issue.1, pp.67-75, 2000.
DOI : 10.1016/S0966-9795(99)00079-5

. Yi, Y. Liu, E. J. Liu, and . Van-humbeeck, Two-way shape memory effect developed by martensite deformation in NiTi, Acta Materiala, vol.47, pp.199-209, 1999.

Z. K. Lu and G. J. Weng, A two-level micromechanical theory for a shape-memory alloy reinforced composite, International Journal of Plasticity, vol.16, issue.10-11, pp.1289-1307, 2000.
DOI : 10.1016/S0749-6419(00)00011-5

K. N. Melton, J. L. Proft, and T. W. Duerig, Wide Hysteresis Shape Memory Alloys Based on the NiTiNb System. The Martensitic Transformation in Science and Technology, pp.191-198, 1989.

S. Mercier and A. Molinari, Homogenization of elastic???viscoplastic heterogeneous materials: Self-consistent and Mori-Tanaka schemes, International Journal of Plasticity, vol.25, issue.6, pp.1024-1048, 2009.
DOI : 10.1016/j.ijplas.2008.08.006

Y. Miyazaki, K. Ohmi, E. Y. Otsuka, and . Suzuki, CHARACTERISTICS OF DEFORMATION AND TRANSFORMATION PSEUDOELASTICITY IN Ti-Ni ALLOYS, Le Journal de Physique Colloques, vol.43, issue.C4, pp.4-255, 1982.
DOI : 10.1051/jphyscol:1982434

URL : https://hal.archives-ouvertes.fr/jpa-00222148

T. Mori and K. Tanaka, Average stress in matrix and average elastic energy of materials with misfitting inclusions, Acta Metallurgica, vol.21, issue.5, pp.571-574, 1973.
DOI : 10.1016/0001-6160(73)90064-3

T. Mura, Micromechanics of Defects in Solids. Martinus nijhoff publishers, 1991.

S. Nemat-nasser and W. G. Guo, Flow stress of commercially pure niobium over a broad range of temperatures and strain rates, Materials Science and Engineering: A, vol.284, issue.1-2, pp.202-210, 2000.
DOI : 10.1016/S0921-5093(00)00740-1

S. Nemat-nasser and M. Hori, Micromechanics : Overall properties of heterogeneous materials. North-Holland, 1993.

S. Nemat-nasser, Y. Su, W. G. Guo, and E. J. Isaacs, Experimental characterization and micromechanical modeling of superelastic response of a porous NiTi shape-memory alloy, Journal of the Mechanics and Physics of Solids, vol.53, issue.10, pp.2320-2346, 2005.
DOI : 10.1016/j.jmps.2005.03.009

J. T. Oh, H. C. Park, and E. W. Hwang, Active shape control of a double-plate structures using piezoceramics and SMA wires, Smart Materials and Structures, vol.10, issue.5, pp.1100-1106, 2001.
DOI : 10.1088/0964-1726/10/5/402

G. B. Olsen and M. Cohen, Thermoelastic behavior in martensitic transformations, Scripta Metallurgica, vol.9, issue.11, pp.1247-1254, 1975.
DOI : 10.1016/0036-9748(75)90418-4

K. Otsuka and C. Wayman, Shape Memory Materials. Sciences sup, 1998.

M. Panico and L. C. Brinson, A three-dimensional phenomenological model for martensite reorientation in shape memory alloys, Journal of the Mechanics and Physics of Solids, vol.55, issue.11, pp.2491-2511, 2007.
DOI : 10.1016/j.jmps.2007.03.010

M. Panico and L. C. Brinson, Computational modeling of porous shape memory alloys, International Journal of Solids and Structures, vol.45, issue.21, pp.5613-5626, 2008.
DOI : 10.1016/j.ijsolstr.2008.06.005

E. Patoor, D. C. Lagoudas, P. B. Entchev, L. C. Brinson, and E. X. Gao, Shape memory alloys, Part I: General properties and modeling of single crystals, Mechanics of Materials, vol.38, issue.5-6, pp.391-429, 2006.
DOI : 10.1016/j.mechmat.2005.05.027

B. Peultier, Alliages à mémoire de forme : modélisation et calcul de structures, Thèse de doctorat, École Nationale Supérieure d'Arts et Métiers -Centre de Metz, p.69, 2005.

B. Peultier, T. B. Zineb, and E. E. Patoor, Macroscopic constitutive law of shape memory alloy thermomechanical behaviour. Application to structure computation by FEM, Mechanics of Materials, vol.38, issue.5-6, pp.510-524, 2006.
DOI : 10.1016/j.mechmat.2005.05.026

M. Piao, K. Otsuka, S. Miyazaki, and E. H. Horikawa, Mechanism of the <I>A<SUB>s</SUB></I> Temperature Increase by Pre-deformation in Thermoelastic Alloys, Materials Transactions, JIM, vol.34, issue.10, pp.919-929, 1993.
DOI : 10.2320/matertrans1989.34.919

P. Popov and D. C. Lagoudas, A 3-D constitutive model for shape memory alloys incorporating pseudoelasticity and detwinning of self-accommodated martensite, International Journal of Plasticity, vol.23, issue.10-11, pp.1679-1720, 2007.
DOI : 10.1016/j.ijplas.2007.03.011

M. A. Qidwai, P. B. Entchev, D. C. Lagoudas, and V. G. Degiorgi, Modeling of the thermomechanical behavior of porous shape memory alloys, International Journal of Solids and Structures, vol.38, issue.48-49, pp.48-498653, 2000.
DOI : 10.1016/S0020-7683(01)00118-4

S. Quilici and G. Cailletaud, FE simulation of macro-, meso- and micro-scales in polycrystalline plasticity, Computational Materials Science, vol.16, issue.1-4, pp.383-390, 1999.
DOI : 10.1016/S0927-0256(99)00081-6

M. , R. , and E. Weynant, Testing of the thermomarker : importance of hysteresis, Journal de Physique IV, vol.1, issue.12, pp.169-174, 1991.
URL : https://hal.archives-ouvertes.fr/jpa-00250574

A. Reuss, Berechnung der Fliessgrenz von Mischkritallen auf Grund der Plastizitätbedigung für Einkristalle, Journal of Applied Mathematics and Mechanics, vol.9, pp.49-58, 1929.
DOI : 10.1002/zamm.19290090104

J. C. Simo and T. J. Hughes, Computational Inelasticity, 2000.

J. A. Simpson, K. Melton, and E. T. Duerig, Nickel/titanium/niobium shape memory alloy and article. United State Patent 4, pp.21-42, 1988.

K. Tanaka, A thermomechanical Sketch of Shape Memory Effect : One dimensional Tensile Behavior, Res. Mechanica, vol.18, pp.251-263, 1986.

W. Tang, B. Sundman, R. Sandström, and C. Qiu, New modelling of the B2 phase and its associated martensitic transformation in the Ti???Ni system, Acta Materialia, vol.47, issue.12, pp.3457-3468, 1999.
DOI : 10.1016/S1359-6454(99)00193-7

K. Tangaraj, Y. C. Chen, and E. K. Salama, Fabrication of porous NiTi shape memory alloy by elemental powder sintering, Proc ASME International Mechanical Engineering Congress and Exposition, 2000.

F. Thiebaud, C. Lexcellent, M. Collet, and E. E. Foltete, Implementation of a model taking into account the asymmetry between tension and compression, the temperature effects in a finite element code for shape memory alloys structures calculations, Computational Materials Science, vol.41, issue.2, pp.208-221, 2007.
DOI : 10.1016/j.commatsci.2007.04.006

I. Part, Fabrication and characterization, Proc. ASC 15th Annual Technical Conference, 2000.

W. Voigt, Über die beziehung zwischen den beiden Elastizitätskontanten isotroper Körper, Wied. Ann, vol.38, pp.573-587

M. F. Wagner and W. Wolfgang, Elastic anisotropy of Ni4Ti3 from first principles, Scripta Materialia, vol.60, issue.4, pp.207-210, 2009.
DOI : 10.1016/j.scriptamat.2008.09.028

X. Wang, B. Xu, and E. Z. Yeu, Phase transformation behavior of pseudoelastic NiTi shape memory alloys under large strain, Journal of Alloys and Compounds, vol.463, issue.1-2, pp.417-422, 2008.
DOI : 10.1016/j.jallcom.2007.09.029

M. L. Wilkins, Calculation of Elastic-Plastic Flow, Methods of Computational Physics, 1964.

F. Xiao, G. Ma, H. Zhao, H. Xu, E. L. Jiang et al., A novel TiNiNb shape memory alloy with high yield strength and high damping capacity, International Conference on Smart Materials and Nanotechnology in Engineering, pp.81-83, 2008.
DOI : 10.1117/12.779884

Y. Yamada, M. Taya, and E. R. Watanabe, Strengthening of Metal Matrix Composite by Shape Memory Effect, Materials Transactions, JIM, vol.34, issue.3, pp.254-260, 1993.
DOI : 10.2320/matertrans1989.34.254

M. L. Young, M. F. Wagner, J. Frenzel, W. W. Schmahl, and E. G. Eggeler, Phase volume fractions and strain measurements in an ultrafine-grained NiTi shape-memory alloy during tensile loading, Acta Materialia, vol.58, issue.7, pp.2344-2354, 2010.
DOI : 10.1016/j.actamat.2009.12.021

W. Zaki and Z. Moumni, A three-dimensional model of the thermomechanical behavior of shape memory alloys, Journal of the Mechanics and Physics of Solids, vol.55, issue.11, pp.2455-2490, 2007.
DOI : 10.1016/j.jmps.2007.03.012

A. Zaoui, Matériaux hétérogènes et composites. Cours à l'École Polytechnique, 2000.

C. S. Zhang, Y. Q. Wang, W. Chai, and L. C. Zhao, The study of constitutional phases in a Ni47Ti44Nb9 shape memory alloy, Materials Chemistry and Physics, vol.28, issue.1, pp.43-50, 1991.
DOI : 10.1016/0254-0584(91)90051-U

L. C. Zhao, T. W. Duerig, S. Justi, K. Melton, and J. L. Proft, The study niobium rich precipitates Ni Ti Nb shape memory alloy. Scripta metallurgica, pp.221-225, 1990.

X. Zhao, X. Yan, Y. Yang, and E. H. Xu, Wide hysteresis NiTi(Nb) shape memory alloys with low Nb content(4.5 at.%), Materials Science and Engineering A, pp.438-440575, 2006.