A. M. Anas, C. Bellouard, and M. Vergnat, Tunneling giant magnetoresistance in coevaporated Fex(SiO)1???x thin films, Congrès Nano2004, pp.6075-6077, 2000.
DOI : 10.1103/PhysRevB.23.1809

B. Lavinia, S. Raphaël, B. Denis, Y. Fort, and G. Jaafar, A new synthesis of ultrafine nanometre-sized bismuth particles, Nanotechnology, vol.15, issue.2, pp.940-944, 2004.

B. Lavinia, S. Raphael, B. Denis, and G. Jaafar, Novel low-temperature synthesis of tin(0) nanoparticles, BAL05 Materials Letters, vol.59, pp.1080-1084, 2005.

F. Besse, C. Boulanger, and J. M. Lecuire, Preparation of Bi1?xSbx films by electrodeposition, Journal of Applied Electrochemistry, vol.30, issue.3, pp.385-392, 2000.
DOI : 10.1023/A:1003990327662

M. Besterci, G. Jangg, M. Slesar, and J. Zrnik, Dispersion strengthened Al-Al4C3 Material prepared by mechanical alloying, BES01 Powder Metallurgy Progress, vol.1, pp.1-59, 2001.

B. Sébastien, D. Guy, F. Jean-pierre, and B. Brigitte, Elaboration de matériaux nanocristallins par Compaction Isostatique à Chaud (CIC) : application à l'aluminium, BIL02, 2002.

W. J. Botta, R. Tomasi, E. M. Pallone, and A. R. Yavari, Nanostructured composites obtained by reactive milling, Scripta Materialia, vol.44, issue.8-9, pp.44-1735, 2001.
DOI : 10.1016/S1359-6462(01)00789-8

G. Bourguignon, A. Maitre, E. Rocca, J. Steinmetz, and L. Torcheux, Electrochemical study in sulphuric acid of the hardening L12 phases of Pb???Ca???Sn alloys, Journal of Power Sources, vol.113, issue.2, pp.301-306, 2003.
DOI : 10.1016/S0378-7753(02)00525-6

. Bouth03, Amélioration du comportement electrochimique des batteries plomb-acide à usage photovoltaique, Gwenaelle BOURGUIGNON Thèse UHP-Nancy, vol.1, 2003.

B. Brown, A. M. , and A. M. , Correlations for diffusion constants, Acta Metallurgica, vol.28, issue.8, pp.1085-1101, 1980.
DOI : 10.1016/0001-6160(80)90092-9

C. Yohann, R. Johann, L. Aranda, F. Jean-marc, M. Alexandre et al., The PbCaSn System : Experimental investigations for x(Ca)?0.25 composition and thermodynamic modelling, CAR07-1, pp.925-932, 2007.

J. P. Celis, J. R. Roos, and A. Pierkarska, Electrodeposited composite tin-lead coatings, Transactions of the IMF, vol.63, issue.1, pp.124-128, 1990.
DOI : 10.1149/1.2109020

C. Yannick and C. Elisabeth, CHAM02Préparation de nanocomposites par mélange de nanopoudres, 2002.

C. and B. L. Coble, Sintering Crystalline Solids. I. Intermediate and Final State Diffusion Models, Journal of Applied Physics, vol.52, issue.5, pp.787-792, 1961.
DOI : 10.1016/0001-6160(54)90071-1

C. and B. L. Coble, Sintering Crystalline Solids. II. Experimental Test of Diffusion Models in Powder Compacts, Journal of Applied Physics, vol.175, issue.5, pp.793-799, 1961.
DOI : 10.1063/1.1731170

A. Dailly, R. Schneider, D. Billaud, Y. Fort, and J. Ghanbaja, DAI03Nanometric antimony powder synthesis by activated alkaline hydride reduction of antimony pentachloride, Journal of Nanoparticle Research, vol.5, issue.3/4, pp.389-393, 2003.
DOI : 10.1023/A:1025529305575

A. Dauscher, M. Dinescu, O. M. Boffoue, A. Jacquot, and B. Lenoir, Temperature-dependant growth of PbTe pulsed laser deposited films on various substrates, Thin Solid Films, vol.497, issue.1-2, pp.170-176, 2006.
DOI : 10.1016/j.tsf.2005.10.079

D. Hugues, M. Alexandre, and V. Michel, DEM04 Caractérisation de plomb et d'alliages de plomb anciens pour vitraux, 2004.

X. Devaux, F. Brochin, A. Dauscher, B. Lenoir, R. Martin-lopez et al., Production of ultrafine powders of Bi???Sb solid solution, DEV97 "Production of ultrafine powders of Bi-Sb solid solution, pp.137-147, 1997.
DOI : 10.1016/S0965-9773(97)00012-3

R. Dez, F. Tenegal, C. Reynaud, M. Mayne, X. Armand et al., Laser synthesis of silicon carbonitride nanopowders; structure and thermal stability, Journal of the European Ceramic Society, vol.22, issue.16, pp.2969-2979, 2002.
DOI : 10.1016/S0955-2219(02)00049-3

URL : https://hal.archives-ouvertes.fr/hal-00144287

E. Yuri, H. Martin, and D. Gemma, Creep properties of an oxide dispersion strengthened nickel-base alloy: the effect of grain orientation and grain aspect ratio, Materials Science and Engineering A, vol.272, pp.163-173, 1999.

C. Garca-oca, M. A. Munoz-morris, and D. G. Morris, High temperature structural coarsening of an ODS FeAl intermetallic, Intermetallics, vol.11, issue.5, pp.425-434, 2000.
DOI : 10.1016/S0966-9795(03)00017-7

G. Guillaume, Relation entre la microstructure, l'état mécanique et la fissuration de cermets alumine chrome élaborés à partir de poudres nanocomposites, Thèse INPL, 2002.

G. Christian, B. Didier, D. Pierre, and E. J. Mech, Constitutive behaviour of metal powder during hot forming. Part I : Experimental investigation with lead powder as a simulation material, pp.18-581, 1999.

M. Goujon, T. Belmonte, and G. Henrion, OES and FTIR diagnostics of HMDSO/O2 gas mixtures for SiOx deposition assisted by RF plasma, Surface and Coatings Technology, vol.188, issue.189, pp.189-756, 2004.
DOI : 10.1016/j.surfcoat.2004.07.048

G. Jean-louis, I. J. Thèse, O. Guichard, A. Tillement, and . Mocellin, Elaboration et caractérisation de cermet alumine-métal à partir de poudres obtenues par mécanosynthèseAlumina-Chromium cermets by hot-pressing of nanocomposite powders, Journal of European Ceramic Society, vol.18, pp.1743-1752, 1998.

H. Martin, H. Saage, K. J. Mirpuri, J. Eckert, L. Schultz et al., Superposition of grains size and dispersion strengthening in ODS L12-(Al,Cr)3Ti, Material Science and Engineering, pp.329-331, 2002.

M. Heilmaier, H. Saage, and J. Eckert, Formation of ODS L12???(Al,Cr)3Ti by mechanical alloying, Materials Science and Engineering: A, vol.239, issue.240, pp.239-240, 1997.
DOI : 10.1016/S0921-5093(97)00644-8

H. J. Hilger, Transformations structurales dans les alliages de plomb, Cours de formation intensive de courte durée (COMETT), 1993.

S. Hirsch, Tin-Lead, Lead and Tin Plating, Metal Finishing Guidebook and Directory'86
DOI : 10.1016/0026-0576(95)93379-g

H. Benlih, J. Vallone, C. F. Klein, and M. J. Luton, In-situ synthesis of particle dispersed nanocrystalline NiAl by cryomilling, Material Research Society Symp. Proc, vol.273, pp.171-176, 1992.

F. Thümmler and R. Oberascher, Introduction to Powder Metallurgy, 1993.

I. V. Itkin and C. B. Alcock, The Ca-Pb (calcium-lead) system, Journal of Phase Equilibria, vol.154, issue.Supl. No 1, p.162, 1992.
DOI : 10.1002/zaac.19110700126

J. Weihua and Y. Kiyoshi, Pulsed wire discharge for nanosize powder synthesis, IEEE Transactions on Plasma Science, vol.26, issue.5, pp.1498-1501, 1998.
DOI : 10.1109/27.736045

K. Jobst, A. Grahl, W. Gruner, and H. Warlimont, Hardening and Smoothing effects of Lignin Sulfonates on the Electrodepostion of Lead, Journal of Applied Electrochemistry, vol.27, issue.4, pp.455-461, 1997.
DOI : 10.1023/A:1018421922805

C. A. Jouenne, S. Editions, K. Paris, . B. Yu, M. V. Kamenev et al., Protective properties of lead coating with thin tin sublayer for copper current leads of negative electrodes in lead acid batteries, JOU84 "Traité des céramiques et matériaux minéraux, 1984.

D. Earlen, K. H. Kindy, A. T. Wahby, Z. Y. Koutnouyan, M. F. Salem et al., The influence of ternary additions on the kinetics of discontinuous precipitation on lead-calcium alloysSintering of chemically preconditioned lead powder, Canada Science of Sintering, vol.12, issue.2, pp.107-108, 1986.

A. V. Krajnikov, A. N. Demidik, and H. M. Ortner, Mechanical properties and interphase boundary composition of ferritic steels strengthened by yttrium and titanium disperse oxides, Materials Science and Engineering: A, vol.234, issue.236, pp.234-236, 1997.
DOI : 10.1016/S0921-5093(97)00212-8

U. Lagerpusch and E. Nembach, Superposition of solid solution and oxide dispersion strengthening in the system CuAu-SiO2, Scripta Materialia, vol.42, issue.6, pp.615-619, 2000.
DOI : 10.1016/S1359-6462(99)00402-9

L. Cyril, H. Martin, L. Patrick, C. Yannick, and C. Matériaux, Le cuivre nanocristallin par métallurgie des poudres -Etude de la microstructure, pp.21-25, 2002.

D. W. Lee, G. H. Ha, and B. K. Kim, Synthesis of Cu-Al 2 O 3 nano composite powder, Scripta Materialia, vol.44, issue.8-9, pp.2137-2140, 2001.
DOI : 10.1016/S1359-6462(01)00764-3

D. W. Lee and B. K. Kim, Nanostructured Cu???Al2O3 composite produced by thermochemical process for electrode application, Materials Letters, vol.58, issue.3-4, pp.378-383, 2004.
DOI : 10.1016/S0167-577X(03)00505-6

A. Maitre, G. Bourguignon, J. M. Fiorani, J. Steinmetz, J. Ghanbaja et al., Aging and overaging processes in Pb-0.08%Ca-x%Sn alloys using transmission electron microscopy and differential scanning calorimetry, MAI03, pp.103-113, 2003.
DOI : 10.1016/S0921-5093(02)00174-0

M. A. Munoz-morris, C. Garca-oca, and D. G. Morris, Microstructure and room temperature strength of Fe-40Al containing nanocrystalline oxide particles, MUN03, pp.51-5187, 2003.
DOI : 10.1016/S1359-6454(03)00382-3

O. Dominique, Elaboration de nanocomposites alumine-metal (Fe,Cr,Ni) par mecanosynthèse, Thèse INPL, 1995.

D. Pech, P. Steyer, A. Loir, and J. , Analyse du comportement protecteur vis-à-vis de la corrosion humide de revêtements CVD base SiOx

S. , J. Millet, and . Matériaux, Elaboration et caractérisation d'alliages PbCa. Influence d'éléments d'addition sur leur durcissement structural, Mickael PERIGAUD, Rapport de stage de DESS, pp.13-17, 2003.

P. Aurélie, I. Drt-génie-des-matériaux, E. Petersson, and . Ahlberg, Rapport de pré-projet UHP-Nancy 1-CEA Valduc-Uni. Evry Val d'Essonne PET00 "Oxidation of Electrodeposited Lead-Tin Alloys in 5M H2SO4, PER99 "Le Plomb et ses alliages, pp.91-143, 1999.

I. Petersson and E. Ahlberg, Kinetics of the electrodeposition of Pb???Sn alloys, Journal of Electroanalytical Chemistry, vol.485, issue.2, pp.166-177, 2000.
DOI : 10.1016/S0022-0728(00)00113-3

R. D. Prengaman, Metallurgy of recycled lead for recombinant batteries, Journal of Power Sources, vol.42, issue.1-2, pp.25-33, 1993.
DOI : 10.1016/0378-7753(93)80134-B

C. Regnier, P. Tristant, and J. Desmaison, Remote microwave plasma-enhanced chemical vapour deposition of insulating coatings (SiO2) on metallic substrates: film properties, Surface and Coatings Technology, vol.80, issue.1-2, pp.18-22, 1996.
DOI : 10.1016/0257-8972(95)02679-7

R. H. Rinnert, M. Vergnat, G. Marchal, and A. Burneau, Intense visible photoluminescence in amorphous SiOx and SiOx:H films prepared by evaporation, Applied Physics Letters, vol.72, issue.24, pp.3157-3159, 1998.
DOI : 10.1063/1.109867

R. H. Rinnert, M. Vergnat, G. Marchal, and A. Burneau, Strong visible photoluminescence in amorphous SiOx and SiOx:H thin films prepared by thermal evaporation of SiO powder, Journal of Luminescence, vol.80, issue.1-4, pp.445-448, 1999.
DOI : 10.1016/S0022-2313(98)00145-8

H. Rinth99, H. David, and R. Roberts-emmanuel, Extruded Lead strengthened by dispersed oxide, Passivation du plomb pur et de ses alliages en milieu sulfurique et atmosphérique Thèse de l'Université Henri Poincaré-Nancy 1, 1962.

G. R. Romanoski, L. L. Snead, R. L. Klueh, and D. T. Hoelzer, Development of an oxide dispersion strengthened, reduced-activation steel for fusion energy, Journal of Nuclear Materials, vol.283, issue.287, pp.283-287, 2000.
DOI : 10.1016/S0022-3115(00)00137-9

R. Frédéric, Etude et compréhension des mécanisme de vieillissement des alliages de Plomb-Calcium, Thèse ENSAM Cluny, 2006.

F. Rossi, L. Delfaut-durut, A. Maitre, M. H. Vilasi-p, K. N. Shingu et al., Nano-structure formation by repeated compressive plastic deformation, ROSSI06 "Vieillissement des alliages plomb-calcium, pp.387-394, 1993.

S. Philippe, STE97Influence des éléments d'alliage sur les propriétés mécaniques, la resisance à la corrosion et la passivation de grilles positives des batteries au plomb destinées au vehicule electrique, Thèse UHP-Nancy, 1997.

R. Subramanian, S. Ramachandran, and M. Finishing, Electrodeposition of Lead-Tin alloy for Use as Anodes, pp.53-56, 1996.

T. Ben, D. , Y. Lereah, G. Deutscher, R. Kofman et al., Solid-liquid transition in ultra-fine lead particles, Philosophical Magazine A, vol.71, issue.5, pp.1135-1143, 1995.

T. Castel-bernard, M. M. Tilman, R. L. Crosby, D. H. Desy, and U. S. , Techniques de l'Ingénieur, Traité Génie des Procédés, J 3 382 TIL71 "Dispersion strengthening of lead by coprecipitation, Bur. Mines, Rep. Invest, 1971.

C. Jean-louis and W. François, Plomb et alliages de plomb

H. Warlimont and T. Hofmann, Technical and economic advantages of making lead???acid battery grids by continuous electroforming, Journal of Power Sources, vol.133, issue.1, pp.14-24, 2004.
DOI : 10.1016/j.jpowsour.2003.12.004

H. J. Wiesner, W. P. Frey, R. R. Vandervoort, E. L. Raymond, and P. , Strengthening of Electrodeposited Lead and Lead Alloys I. Process Development, pp.358-361, 1970.

W. René, W. Otto, and H. Fran, Métallurgie XVIII -2 ? 1978 WON00 "Cancer mortality study of employees at lead battery plants and lead smelters, WIN78 "Comportement anodique du plomb et milieu sulfurique, pp.255-270, 1947.

T. Yamasaki, Y. J. Zheng, Y. Ogino, M. Terasawa, T. Mitamura et al., Formation of metal???TiN/TiC nanocomposite powders by mechanical alloying and their consolidation, Materials Science and Engineering: A, vol.350, issue.1-2, pp.168-172, 2003.
DOI : 10.1016/S0921-5093(02)00722-0

S. Zhong, H. K. Liu, S. X. Dou, and M. Skyllas-kazacos, Evaluation of lead???calcium???tin???aluminium grid alloys for valve-regulated lead/acid batteries, Journal of Power Sources, vol.59, issue.1-2, pp.123-129, 1996.
DOI : 10.1016/0378-7753(95)02312-7