A. Abed, Contribution à l'Etude et au Diagnostic de la Machine Asynchrone, Thèse de Doctorat, 2002.
URL : https://hal.archives-ouvertes.fr/tel-01746654

P. L. Alger, Induction Machines, their Behavior and Uses, 1970.

R. N. Andriamalala-mémoire-de and D. Protee, Commande vectorielle des convertisseurs multiniveaux : analyse de fonctionnement en vue d'optimiser le facteur de puissance, 2005.

R. N. Andriamalala, H. Razik, G. Didier, M. B. Corrêa, F. M. Sargos et al., A Model of Dual Stator Winding Induction Machine in case of Stator and Rotor Faults for Diagnosis Purpose, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting, 2006.
DOI : 10.1109/IAS.2006.256868

URL : https://hal.archives-ouvertes.fr/hal-00084031

R. N. Andriamalala, H. Razik, G. Didier, M. B. Corrêa, and F. M. Sargos, An Accurate Model by Using the Legendre Polynomial Functions of a Dual Stator Induction Machine Dedicated to The Static Eccentricity Diagnosis, IEEE Ind. Applicat. Society, IAS, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00185666

R. N. Andriamalala, H. Razik, and F. M. Sargos, Indirect-Rotor-Field-Oriented-Control of a Double-Star Induction Machine using the RST controller, 2008 34th Annual Conference of IEEE Industrial Electronics, p.6, 2008.
DOI : 10.1109/IECON.2008.4758457

R. N. Andriamalala, H. Razik, L. Baghli, and F. M. Sargos, Digital vector control of a six-phase series-connected two-motor drive, 2008 34th Annual Conference of IEEE Industrial Electronics, p.6, 2008.
DOI : 10.1109/IECON.2008.4758453

R. N. Andriamalala, H. Razik, L. Baghli, and F. M. Sargos, Eccentricity Fault Diagnosis of a Dual-Stator Winding Induction Machine Drive Considering the Slotting Effects, IEEE Transactions on Industrial Electronics, vol.55, issue.12, 2008.
DOI : 10.1109/TIE.2008.2004664

URL : https://hal.archives-ouvertes.fr/hal-00440401

S. Bachir, Contribution au Diagnostic de la Machine Asynchrone par Estimation Paramétrique, Thèse de Doctorat, 2002.

L. Baghli, Contribution à la Commande de la Machine Asynchrone, Utilisation de la Logique Floue, des Réseaux de Neurones et des Algorithmes Génétiques, Thèse de Doctorat, 1999.

J. F. Bangura and N. A. Demerdash, Comparison between characterization and diagnosis of broken bars/end-ring connectors and airgap eccentricities of induction motors in ASDs using a coupled finite element-state space method, IEEE Transactions on Energy Conversion, vol.15, issue.1, pp.48-56, 2000.
DOI : 10.1109/60.849115

A. Bellini, F. Filippetti, G. Franceschini, and C. Tassoni, Closed Loop Control Impact on the Diagnosis of Induction Motors Faults, IEEE Ind, pp.1913-1921, 1999.

R. Bigret and J. L. Féron, Diagnostic-Maintenance Disponibilité des Machines Tournantes, Collection Technologies, 1995.

F. Blasckhe, The principle of field orientation as applied to the new transvektor closed-loop control system for rotating-field machines, Siemens Review, issue.5, pp.217-220, 1972.

M. Blödt, Condition Monitoring of Mechanical Faults in Variable Speed Induction Motor Drives, Application of Stator Current Time-Frequency Analysis and Parameter Estimation, Thèse de Doctorat, 2006.

R. Bojoi, M. Lazarri, F. Profumo, and A. Tenconni, Digital Field-Oriented Control for Dual Three-phase Induction Motor Drive, IEEE Trans. on Ind. Applicat, vol.40, issue.5, pp.752-760, 2003.
DOI : 10.1109/tia.2003.811790

R. Bojoi, G. Griva, and . Profumo, Field Oriented Control of Dual Three-Phase Induction Motor Drives using a Luenberger Flux Observer, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting, 2006.
DOI : 10.1109/IAS.2006.256692

A. Bouscayrol, M. Pietrzak-david, P. Delarue, R. Pe¯-na-eguiluz, P. E. Vidal et al., Weighted Control of Traction Drives With Parallel-Connected AC Machines, IEEE Transactions on Industrial Electronics, vol.53, issue.6, pp.1799-1806, 2006.
DOI : 10.1109/TIE.2006.885106

H. Bühler, Réglages échantillonnés, Presses Polytechniques et Universitaires Romandes, p.1986

S. M. Cruz and A. J. Cardoso, Diagnosis of Rotor Faults in Closed-Loop Induction Motor Drives, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting, 2006.
DOI : 10.1109/IAS.2006.256869

C. C. Cunha, J. C. Braz, and . Filho, Detection of Rotor Faults in Squirrel-Cage Induction Motors using Adjustable Speed Drives, IEEE Ind, 2006.

J. R. Cameron, W. T. Thomson, and A. B. Dow, Vibration and Current Monitoring for Detecting Air Gap Eccentricity in Large Induction Motors, IEE Proced, pp.155-163, 1986.

R. Casimir, Diagnostic des Défauts des Machines Asynchrones par Reconnaissance de Formes, Thèse de Doctorat, 2003.

J. D. Chatelain, Machines électriques, 1983.

M. B. Corrêa, C. B. Jacobina, E. R. Da, A. M. Silva, and . Lima, An induction motor drive system with improved fault tolerance, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129), pp.873-879, 2001.
DOI : 10.1109/IAS.2000.883112

M. B. Corrêa, Estruturas Estáticas Alternativas para Acionamento de Motores de Induçao, Tese de doutorado, 2002.

S. M. Cruz and A. J. Cardoso, Diagnosis of Stator Inter-Turn Short Circuits in DTC Induction Motor Drives, IEEE Trans. on Ind. Applicat, vol.40, issue.5, pp.24-34, 2004.

C. R. Da and . Silva, Contribuição ao Estudo dos Sistemas de Acionamento de Máquinas Assíncronas Hexafásicas, Tese de doutorado, 2007.

G. Didier, Modélisation et Diagnostic de la Machine Asynchrone en Présence de Défaillances, Thèse de Doctorat, 2004.

B. De-fornel and J. P. Louis, Identification et observation des actionneurs électriques, Lavoisier, vol.1, issue.2, 2007.

V. Devanneaux, Modélisation des Machines Asynchrones Triphasées à Cage en Vue de la Surveillance et du Diagnostic, Thèse de Doctorat, 2002.

D. G. Dorrell and A. C. Smith, Calculation of UMP in induction motors with series or parallel winding connections, IEEE Transactions on Energy Conversion, vol.9, issue.2, pp.304-310, 1994.
DOI : 10.1109/60.300144

D. G. Dorrell, W. T. Thomson, and S. Roach, Combined effects of static and dynamic eccentricity on airgap flux waves and the application of current monitoring to detect dynamic eccentricity in 3-phase induction motors, Seventh International Conference on Electrical Machines and Drives, pp.151-155, 1995.
DOI : 10.1049/cp:19950853

D. G. Dorrell, W. T. Thomson, and S. Roach, Analysis of Air Gap Flux, Current and vibration Signals as Function of the Combination of Static and Dynamic Air Gap Eccentricity in Three-Phase Induction Motors, IEEE Ind. Applicat. Society, pp.563-570, 1995.

D. G. Dorrell, Calculation of unbalanced magnetic pull in small cage induction motors with skewed rotors and dynamic rotor eccentricity, IEEE Transactions on Energy Conversion, vol.11, issue.3, pp.483-487, 1996.
DOI : 10.1109/60.536997

D. G. Dorrell, W. T. Thomson, and S. Roach, Analysis of airgap flux, current, and vibration signals as a function of the combination of static and dynamic airgap eccentricity in 3-phase induction motors, IEEE Transactions on Industry Applications, vol.33, issue.1, pp.24-34, 1997.
DOI : 10.1109/28.567073

A. Faidallah, Contribution à l'Identification et à la Commande Vectorielle des Machines Asynchrones, Thèse de Doctorat, 1995.
URL : https://hal.archives-ouvertes.fr/tel-01751587

J. Faiz and I. Tabatabaei, Extension of winding function theory for nonuniform air gap in electric machinery, IEEE Transactions on Magnetics, vol.38, issue.6, pp.3654-3657, 2002.
DOI : 10.1109/TMAG.2002.804805

G. F. Franklin, J. Powell, and M. L. Workman, Digital Control of Dynamic Systems, 1998.

G. Griva, F. Profumo, R. Bojoi, R. Maceratini, and G. Barba, Luenberger Observer for High Speed Induction Machine Drives based on a New Pole Placement Method, IEEE Europ. Conf. on Pow, 2001.

D. Hadiouche, Contribution à l'Etude de la Machine Asynchrone Double-Etoile : Modélisation, Alimentation et Structure, Thèse de Doctorat, 2001.

D. Hadiouche, H. Razik, and A. Rezzoug, On the Modeling and Design of Dual-Stator Windings to Minimize Circulating Harmonic Currents for VSI Fed AC Machines, IEEE Transactions on Industry Applications, vol.40, issue.2, pp.506-516, 2004.
DOI : 10.1109/TIA.2004.824511

H. Hesse, Air gap permeance in doubly-slotted asynchronous machines, IEEE Transactions on Energy Conversion, vol.7, issue.3, pp.491-499, 1992.
DOI : 10.1109/60.148571

X. Huang, T. G. Habetler, and R. G. Harley, Detection of Rotor Eccentricity Faults in a Closed-Loop Drive-Connected Induction Motor Using an Artificial Neural Network, IEEE Pow, 2004.
DOI : 10.1109/TPEL.2007.900607

X. Huang, T. G. Habetler, and R. G. Harley, Analysis, simulation, and experiments of rotor eccentricity in closed-loop drive-connected induction motors, 2005 5th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, 2005.
DOI : 10.1109/DEMPED.2005.4662518

C. B. Jacobina, R. L. Ribeiro, A. M. Lima, E. R. Da, and . Silva, Reversible six-phase AC motor drive systems with reduced switch count, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting., pp.1077-1084, 2003.
DOI : 10.1109/IAS.2004.1348814

C. B. Jacobina, I. S. De-freitas, C. R. Da-silva, M. B. Corrêa, E. R. Da et al., Reversible six-phase AC motor drive systems with reduced switch count, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting., 2004.
DOI : 10.1109/IAS.2004.1348814

C. B. Jacobina, I. S. De-freitas, C. R. Da-silva, M. B. Corrêa, E. R. Da et al., Reversible six-phase AC motor drive systems with reduced switch count, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting., 2004.
DOI : 10.1109/IAS.2004.1348814

C. B. Jacobina, R. S. Miranda, and A. M. Lima, Reconfigurable Fault Tolerant Dual-Winding AC Motor Drive System, IEEE 36th Conference on Power Electronics Specialists, 2005., 2005.
DOI : 10.1109/PESC.2005.1581840

C. B. Jacobina, O. I. Da-silva, E. C. , S. Jr, and A. M. Lima, Dual AC Drives with Five-Leg Converter, IEEE 36th Conference on Power Electronics Specialists, 2005., 2005.
DOI : 10.1109/PESC.2005.1581875

M. Jones, S. N. Vukosavic, E. Levi, and A. Iqbal, A Six-Phase Series-Connected Two-Motor Drive With Decoupled Dynamic Control, IEEE Transactions on Industry Applications, vol.41, issue.4, pp.1056-1066, 2005.
DOI : 10.1109/TIA.2005.851020

E. C. Junior, Sistemas de Conversão Estático Com Número Reduzido de Componentes, Tese de doutorado, 2007.

M. Kostenko and L. Piotrovski, Machines électriques, 1969.

P. C. Krause, O. Wasynczuk, and S. D. Sudhoff, Analysis of Electric Machinery and Drive Systems, 2002.

H. Kubota, H. Matsuse, and T. Nakano, New Adaptative Flux Observer of Induction Motor for Wide Speed Range Motor Drives, IEEE Ind. Electron. Conf. IECON, 1990.

H. Kubota, H. Matsuse, and T. Nakano, DSP-based Speed Adaptative Flux Observer of Induction Motor, IEEE Trans. on Ind. Electron, vol.29, issue.6, pp.344-348, 1993.

Y. Kuono, H. Kawai, S. Yokomizo, and K. Matsuse, A speed sensorless vector control method of parallel connected dual induction motor fed by a single inverter, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248), 2001.
DOI : 10.1109/IAS.2001.955652

B. Laporte, Machines électriques tournantes. Conception, dimensionnement, fonctionnement " , ellipses, 2007.

E. Levi, M. Jones, and S. N. Vukosavic, Even-phase multi-motor vector controlled drive with single inverter supply and series connection of stator windings, IEE Proc. Electr, pp.580-590, 2003.
DOI : 10.1049/ip-epa:20030424

E. Levi, M. Jones, S. N. Vukosavic, and H. A. Toliyat, A Novel Concept of a Multiphase, Multimotor Vector Controlled Drive System Supplied From a Single Voltage Source Inverter, IEEE Transactions on Power Electronics, vol.19, issue.2, pp.320-335, 2004.
DOI : 10.1109/TPEL.2003.823241

E. Levi, M. Jones, S. N. Vukosavic, and H. A. Toliyat, Operating Principles of a Novel Multiphase Multimotor Vector-Controlled Drive, IEEE Transactions on Energy Conversion, vol.19, issue.3, pp.320-335, 2004.
DOI : 10.1109/TEC.2004.832055

E. Levi, M. Jones, S. N. Vukosavic, and H. A. Toliyat, A Series-Connected Two-Motor Six-Phase Drive With Induction and Permanent Magnet Machines, IEEE Transactions on Energy Conversion, vol.21, issue.1, pp.121-129, 2006.
DOI : 10.1109/TEC.2005.853737

E. Levi, M. Jones, S. N. Vukosavic, and H. A. Toliyat, Steady State Modeling of Series-Connected Five- Phase and Six-Phase Two-Motor Drives, IEEE Ind. Applicat. Society, IAS, Tampa Floride, 2006.

X. Li, Q. Wu, and S. Nandi, Performance Analysis of a Three-Phase Induction Machine With Inclined Static Eccentricity, IEEE Transactions on Industry Applications, vol.43, issue.2, pp.531-541, 2007.
DOI : 10.1109/TIA.2006.889806

T. A. Lipo, Introduction to AC Machine Design, Winconsin Power Electronics Research Center, 2004.
DOI : 10.1002/9781119352181

URL : http://onlinelibrary.wiley.com/doi/10.1002/9781119352181.fmatter/pdf

R. Longchamp, Commande Numérique des Systèmes Dynamiques, Presses Polytechniques et Universitaires Romandes, 2006.

Y. Matsumoto, S. Ozaki, and A. Kawamura, A novel vector control of single-inverter multiple-induction-motors drives for Shinkansen traction system, APEC 2001. Sixteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.01CH37181), pp.608-614, 2001.
DOI : 10.1109/APEC.2001.911710

K. Matsuse, Y. Kouno, H. Kawai, and S. Yokomizo, A speed-sensorless vector control method of parallel-connected dual induction motor fed by a single inverter, IEEE Transactions on Industry Applications, vol.38, issue.6, pp.1566-1571, 2002.
DOI : 10.1109/TIA.2002.804763

J. Mavier, Convertisseurs génériques à tolérance de panne Applications pour le domaine aéronautique, Thèse de Doctorat, 2007.

F. Meibody-tabar, Etude d'une machine synchrone à réluctance variable pour des applications à grande vitesse, Thèse de Doctorat, 1986.

R. S. Miranda, Sistemas de Acionamentos CA Multifases com Estratégias de Controle Tolerante a Faltas e Redução da Tensão de Modo Comum, Exame de Qualificação submetida à Coordenação dos cursos de Pós-Graduação em Engenharia Elétrica da, 2006.

K. K. Mohapatra, R. S. Kanchan, M. R. Baiju, P. N. Tekwani, and K. Gopakumar, Independent Field-Oriented Control of Two Split-Phase Induction Motors From a Single Six-Phase Inverter, IEEE Transactions on Industrial Electronics, vol.52, issue.5, pp.1372-1382, 2005.
DOI : 10.1109/TIE.2005.855659

S. Nandi, S. Ahmed, and H. A. Toliyat, Detection of rotor slot and other eccentricity related harmonics in a three phase induction motor with different rotor cages, IEEE Transactions on Energy Conversion, vol.16, issue.3, pp.253-260, 2001.
DOI : 10.1109/60.937205

S. Nandi, R. Mohan, and H. A. Toliyat, Performance Analysis of a Three-Phase Induction Motor Under Mixed Eccentricity Condition, IEEE Trans. Ener. Conv, vol.17, issue.3, pp.253-260, 2002.

S. Nandi, S. Ahmed, H. A. Toliyat, and R. M. Bharadwaj, Selection criteria of induction machines for speed-sensorless drive applications, IEEE Transactions on Industry Applications, vol.39, issue.3, pp.704-712, 2003.
DOI : 10.1109/TIA.2003.810651

S. Nandi, Modeling of Induction Machines Including Stator and Rotor Slot Effects, IEEE Transactions on Industry Applications, vol.40, issue.4, pp.1058-1065, 2004.
DOI : 10.1109/TIA.2004.830764

S. Nandi, X. Li, and H. A. Toliyat, Condition Monitoring and Fault Diagnosis of Electrical Motors???A Review, IEEE Transactions on Energy Conversion, vol.20, issue.4, pp.719-729, 2005.
DOI : 10.1109/TEC.2005.847955

D. W. Novotny and T. A. Lipo, Vector control and dynamics of AC drives, 1996.

K. Ogata, Discrete-Time Control Systems, 1994.

T. M. Oliveira, Conversores Estáticos Com Controle Digital Para Aplicações Em Sistemas Monofásicos, Tese de doutorado, 2001.

O. Ondel, Diagnostic par Reconnaissance de Forme : Application à un Ensemble Convertisseur-Machine Asynchrone, Thèse de Doctorat, 2006.

T. Raminosoa, Optimisation des Performances des Machines Synchro-Réluctantes par Réseaux de Perméance, Thèse de Doctorat, Institut National Polytechnique de Lorraine, 2006.

A. Razik, La machine à induction : commande et défaillance, Rapport HDR, 2000.

H. Razik, Machine Asynchrone en Vitesse variable, Editions Hermès Science, vol.1, issue.2, 2006.

H. Razik, R. N. Andriamalala, M. Correa, and E. R. Da-silva, A Complex Spectral Analysis of the Stator Current Dedicated to the Defect Monitoring, IEEE Ind. Electron. Conf, IECON, p.6, 2008.

A. Rezzoug, Régimes perturbés des machines électriques, 2004.

A. R. Cours-de and D. Protee, Régimes perturbés des machines électriques, 2005.

R. L. Ribeiro, C. B. Jacobina, E. R. Da, A. M. Silva, and . Lima, Fault Detection of Open-Switch Damage in Voltage-Fed PWM Motor Drive Systems, IEEE Trans. on Ind. Electron, vol.18, issue.2, pp.439-446, 2004.

R. L. Ribeiro, C. B. Jacobina, E. R. Da, A. M. Silva, and . Lima, Fault-Tolerant Voltage-Fed PWM Inverter AC Motor Drive Systems, IEEE Transactions on Industrial Electronics, vol.51, issue.2, pp.439-446, 2004.
DOI : 10.1109/TIE.2004.825284

B. Robyns, B. François, P. Degobert, and J. P. Hautier, Commande vectorielle de la machine asynchrone. Desensibilisation et optimisation par la logique floue, 2007.

F. M. Sargos, Etude théorique des performances des machines à réluctance variable, Thèse de Doctorat, Institut National Polytechnique de Lorraine, 1981.

F. M. Sargos-cours-de and D. Protee, Machine synchrone à pôles saillants, 2005.

F. M. Sargos, Conversion d'énergie dans les machines électriques, 2008.

M. G. Say, Alternating Current Machines, 1976.

G. Seguier and F. Notelet, Electrotechnique industrielle, Edition TEC & DOC, 2006.

E. Serna and J. Pacas, Detection of Rotor Faults in Field Oriented Controlled Induction Machines, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting, pp.6-12, 2006.
DOI : 10.1109/IAS.2006.256866

M. A. Shamsi and . Nejad, Architectures d'Alimentation et de Commande d'Actionneurs Tolérants aux Défauts -Régulateur de Courant Non Linéaire à Large Bande Passante, Thèse de Doctorat, 2007.

J. R. Stack, R. G. Harley, and T. G. Habetler, Fault Classification and Fault Signature Production for Rolling Element Bearings in Electric Machines, IEEE Transactions on Industry Applications, vol.40, issue.3, pp.735-739, 2004.
DOI : 10.1109/TIA.2004.827454

J. R. Stack, R. G. Harley, and T. G. Habetler, An Amplitude Modulation Detector for Fault Diagnosis in Rolling Element Bearings, IEEE Transactions on Industrial Electronics, vol.51, issue.5, pp.1097-1102, 2004.
DOI : 10.1109/TIE.2004.834971

A. Stavrou and J. Penman, The on-Line Quantification of Air-gap Eccentricity in Induction Machines, lntern. Conf. on. Electr. Machines, ICEM, pp.261-266, 1994.

A. Stavrou and J. Penman, Modeling Dynamic Eccentricity in Smooth Air-gap Induction Machines, IEEE Intern. Electr. Mach. Drives. Conf., IEMDC, pp.864-871, 2001.

P. J. Tavner, B. G. Gaydon, and D. M. Ward, Monitoring generators and large motors, IEE Proced, pp.169-180, 1986.
DOI : 10.1049/ip-b.1986.0024

D. Thailly, Etude du Champ de Dispersion des Machines à Courant Alternatif : Application au Diagnostic, Thèse de Doctorat, 2007.

W. Thomson and A. Barbour, The On-Line Prediction of Airgap Eccentricity Levels in Large (MW Range) Three-Phase Induction Motors, IEEE Intern. Electr. Mach. Drives. Conf., IEMDC, 1999.

W. Thomson, D. Rankin, and D. G. Dorrell, On-line current monitoring to diagnose airgap eccentricity in large three-phase induction motors-industrial case histories verify the predictions, IEEE Transactions on Energy Conversion, vol.14, issue.4, pp.1372-1378, 1999.
DOI : 10.1109/60.815075

W. Thomson and M. Fenger, Current signature analysis to detect induction motor faults, IEEE Ind. Applicat.Society Magazine, pp.26-34, 2001.
DOI : 10.1109/2943.930988

W. Thomson, On-line MCSA to Diagnose Shorted-turns in Low Voltage Stator Windings of Three-Phase Induction Motors Prior to Failure, pp.891-898, 2001.

P. Vas, Sensorless Vector and Direct Torque Control, 1998.

G. C. Verghese and S. A. Sanders, Observers for flux estimation in induction machines, IEEE Transactions on Industrial Electronics, vol.35, issue.1, pp.85-94, 1988.
DOI : 10.1109/41.3067

L. Wu, B. Lu, X. Huang, T. G. Habetler, and R. G. Harley, Improved Online Condition Monitoring Using Static-eccentricity-Induced Negative Sequence Current Information in Induction Machines, IEEE Ind. Electron. Conf., IECON, pp.1737-1742, 2005.

L. Wu, Separating Load Torque Ooscillation and Rotor Faults in Stator Current Based-Induction Motor Condition Monitoring, 2007.

Z. Wu and O. Ojo, Coupled-circuit-model simulation and airgap-field calculation of a dual-stator-winding induction machine, IEE Proc. Electr.-Power and Appl, pp.387-400, 2006.
DOI : 10.1049/ip-epa:20050466

Y. Zhao and T. A. Lipo, Modeling and control of a multi-phase induction machine with structural unbalance, IEEE Transactions on Energy Conversion, vol.11, issue.3, pp.570-577, 1996.
DOI : 10.1109/60.537009

Y. Zhao and T. A. Lipo, Modeling and control of a multi-phase induction machine with structural unbalance, IEEE Transactions on Energy Conversion, vol.11, issue.3, pp.578-584, 1996.
DOI : 10.1109/60.537028

R. N. Andriamalala, H. Razik, L. Baghli, and F. M. Sargos, Eccentricity Fault Diagnosis of a Dual-Stator Winding Induction Machine Drive Considering the Slotting Effects, IEEE Transaction on Industrial Electronics, pp.4238-4251, 2008.
DOI : 10.1109/TIE.2008.2004664

URL : https://hal.archives-ouvertes.fr/hal-00440401

R. N. Andriamalala, H. Razik, L. Baghli, and F. M. Sargos, Digital vector control of a six-phase series-connected two-motor drive, 2008 34th Annual Conference of IEEE Industrial Electronics, p.6, 2008.
DOI : 10.1109/IECON.2008.4758453

R. N. Andriamalala, H. Razik, and F. M. Sargos, Indirect-Rotor-Field-Oriented-Control of a Double-Star Induction Machine using the RST controller, 2008 34th Annual Conference of IEEE Industrial Electronics, p.6, 2008.
DOI : 10.1109/IECON.2008.4758457

H. Razik, R. N. Andriamalala, M. Correa, and E. R. Da-silva, A Complex Spectral Analysis of the Stator Current Dedicated to the Defect Monitoring, IEEE Industrial Electronics Conference-IECON, p.6, 2008.

R. N. Andriamalala, H. Razik, G. Didier, M. B. Corrêa, and F. M. Sargos, An Accurate Model by Using the Legendre Polynomial Functions of a Dual Stator Induction Machine Dedicated to The Static Eccentricity Diagnosis, IEEE Industrial Application Society Annual Meeting- IAS, p.8, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00185666

M. E. Oumaamar, A. Khezzar, M. Boucherma, H. Razik, R. N. Andriamalala et al., Neutral Voltage Analysis for Broken Rotor Bars Detection in Induction Motors Using Hilbert Transform Phase, IEEE Industrial Application Society Annual Meeting-IAS, p.8, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00185662

C. R. Da-silva, M. B. Corrêa, C. B. Jacobina, A. M. Lima, E. R. Da-silva et al., A New Approach for Inter-Turn Short-Circuit Detection in Six-Phase Induction Motor, IECON 2006, 32nd Annual Conference on IEEE Industrial Electronics, p.5, 2006.
DOI : 10.1109/IECON.2006.347634

R. N. Andriamalala, H. Razik, G. Didier, F. Sargos, C. R. Da et al., A Model of Dual Stator Winding Induction Machine in case of Stator and Rotor Faults for Diagnosis Purpose, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting, p.6, 2006.
DOI : 10.1109/IAS.2006.256868

URL : https://hal.archives-ouvertes.fr/hal-00084031

T. Raminosoa, I. Rasoanarivo, F. Sargos, and R. N. Andriamalala, Constrained Optimization of High Power Synchronous Reluctance Motor Using Non Linear Reluctance Network Modeling, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting, p.8, 2006.
DOI : 10.1109/IAS.2006.256684