Computer-Controlled Systems : Theory and Design. Systems Sciences Series, 1997. ,
Scope and application of reconfigurable control, Proc. of the 11th Mediterranean Conference on Control and Automation, MED'03, CD-ROM, 2003. ,
Reconfigurable Distributed Control, 2005. ,
Diagnosis and Fault-Tolerant Control. Control Systems Series, 2006. ,
Concepts and methods in fault-tolerant control, Proceedings of the 2001 American Control Conference. (Cat. No.01CH37148), pp.2606-2620, 2001. ,
DOI : 10.1109/ACC.2001.946264
Modelon-demand" identification for control : an experimental study and feasibility analysis for modbased predictive control, Symposium on System Identification, 2000. ,
Fault Tolerance in Large Scale Systems : hybrid and distributed approaches, Thèse de doctorat, 2006. ,
Robust model-based fault diagnosis for dynamic systems, 1999. ,
Fault monitoring in the presence of fault-tolerant control, Proc. of the 6th IFAC SafeProcess'06, pp.1321-1326, 2006. ,
Fault tolerant control of the boeing 747 short-period mode using the admissible model matching Bibliographie technique, Proc. of the IFAC Symposium SafeProcess'06, pp.871-876, 2006. ,
Minimal state-space model realisation of a nonlinear helicopter, IEE Proceedings - Control Theory and Applications, vol.145, issue.4, pp.415-422, 1998. ,
DOI : 10.1049/ip-cta:19982111
A theory of state covariance assignment for discrete systems, IEEE Transactions on Automatic Control, issue.1, pp.3235-3276, 1987. ,
Improved robustness bounds using covariance matrices, Proceedings of the 28th IEEE Conference on Decision and Control, pp.2667-2672, 1989. ,
DOI : 10.1109/CDC.1989.70663
The steady-state invertibility and feedforward control of linear time-invariant systems, IEEE Transactions on Automatic Control, vol.21, issue.4, pp.529-534, 1976. ,
DOI : 10.1109/TAC.1976.1101256
Linear control systems, analysis and design, conventional and modern, Series in Electrical and Computer Engineering, 1995. ,
Parameter estimation methods for fault detection and isolation, Proc. of the 12th International Workshop on Principles of Diagnosis, pp.1-11, 2001. ,
Fault diagnosis of networked control systems, Annual Reviews in Control, vol.31, issue.1, pp.55-68, 2007. ,
DOI : 10.1016/j.arcontrol.2007.01.001
Fault diagnosis in dynamic systems using analytical and knowledge-based redundancy, Automatica, vol.26, issue.3, pp.459-474, 1990. ,
DOI : 10.1016/0005-1098(90)90018-D
Enhancement of robustness in observer based fault detection, International Journal of Control, vol.54, pp.955-981, 1994. ,
Recoverability viewed as a system property, Proc. of the European Control Conference, ECC'99, CD-ROM, 1999. ,
Control System Design, 1996. ,
Stability of the pseudo-inverse method for reconfigurable control systems, International Journal of Control, vol.32, issue.3, pp.717-729, 1991. ,
DOI : 10.1109/TAC.1987.1104667
Reconfigurable control system design via perfect model following, International Journal of Control, vol.56, issue.4, pp.783-798, 1992. ,
DOI : 10.1109/NAECON.1989.40230
Survey of model-based failure detection and isolation in complex plants, IEEE Control Systems Magazine, vol.8, issue.6, pp.3-11, 1988. ,
DOI : 10.1109/37.9163
Fault detection and diagnosis in engineering systems, 1998. ,
Reconfiguración de sistemas de una sola entrada usando información de segundo orden, Seminario Anual de Automática, Electrónica Industrial e Instrumentación, SAAEI'07, pp.130-135, 2007. ,
Actuator fault tolerant controller synthesis based on second order information, 4th. Workshop on Advanced Control and Diagnosis, ACD'06, CD-ROM, 2006. ,
Actuator fault tolerant control design : modified pseudo-inverse method for singleinput systems based on second order information, 5th. Workshop on Advanced Control and Diagnosis, ACD'07, 2007. ,
Actuator fault tolerant controller synthesis based on second order information, Proc. of the European Control Conference, ECC'07, pp.1811-1816, 2007. ,
Performance evaluation of networked control systems based on the controllability gramian, 3th. Workshop on Networked Control Systems Tolerant to faults, 2007. ,
On-line Reconfigurability Evaluation for Actuator Faults Using Input/Output Data, Proceedings of the IFAC Symposium SafeProcess'09, CD-ROM, 2009. ,
DOI : 10.3182/20090630-4-ES-2003.00112
Identification of physical parameters of rigid rotor in magnetic bearings, Mechanics, vol.25, issue.2, pp.64-71, 2006. ,
Minimum-energy covariance controllers, Automatica, vol.33, issue.4, pp.569-578, 1997. ,
DOI : 10.1016/S0005-1098(96)00188-4
Optimal control and stochastic estimation : Theory and applications, 1988. ,
Contribution aux systèmes tolérants aux défauts : Synthèse d'une méthode de reconfiguration et/ou de restructuration intégrant la fiabilité des composants, Thèse de doctorat, 2007. ,
On-line identification of forward/inverse systems for adaptive control applications, Proc. of the Guidance, Navigation and Control Conference, pp.1639-1649, 1992. ,
Covariance control theory, International Journal of Control, vol.22, issue.1, pp.13-32, 1987. ,
DOI : 10.1109/TAC.1963.1105511
All covariance controllers for linear discrete-time systems, IEEE Transactions on Automatic Control, vol.35, issue.8, pp.908-915, 1990. ,
DOI : 10.1109/9.58499
Fault-tolerant control and reconfiguration for high performance aircraft : review, 2002. ,
Using the unfalsified control concept to achieve fault tolerance, Proc. of the 17th IFAC World Congress, pp.1236-1242, 2008. ,
Digital Control Systems, Fundamentals, Deterministic Control, 1997. ,
Supervision, fault-detection and fault-diagnosis methods ??? An introduction, Control Engineering Practice, vol.5, issue.5, pp.639-652, 1997. ,
DOI : 10.1016/S0967-0661(97)00046-4
Fault-diagnosis systems : An introduction from fault detection to fault tolerance, 2006. ,
DOI : 10.1007/3-540-30368-5
Trends in the application of model-based fault detection and diagnosis of technical processes, Control Engineering Practice, vol.5, issue.5, pp.709-719, 1997. ,
DOI : 10.1016/S0967-0661(97)00053-1
Fault estimation and accommodation for linear MIMO discrete-time systems, IEEE Transactions on Control Systems Technology, vol.13, issue.3, pp.493-499, 2005. ,
DOI : 10.1109/TCST.2004.839569
Fault-tolerant control systems. An introductory overview, Acta Automatica Sinica, vol.31, issue.1, pp.160-174, 2005. ,
URL : https://hal.archives-ouvertes.fr/hal-00710516
Design of Reliable Control Systems Possessing Actuator Redundancies, Journal of Guidance, Control, and Dynamics, vol.4, issue.2, pp.709-718, 2000. ,
DOI : 10.1080/00207729108910737
Applied system identification, 1994. ,
An eigensystem realization algorithm for modal parameter identification and model reduction, Journal of Guidance, Control, and Dynamics, vol.33, issue.1, pp.620-627, 1985. ,
DOI : 10.1109/TAC.1981.1102568
Identification of observer/Kalman filter Markov parameters - Theory and experiments, Journal of Guidance, Control, and Dynamics, vol.4, issue.1, pp.320-329, 1993. ,
DOI : 10.1016/B978-0-12-012736-8.50010-3
Linear Systems, 1980. ,
A bank of reconfigurable LQG controllers for linear systems subjected to failures, Proceedings of the 39th IEEE Conference on Decision and Control (Cat. No.00CH37187), pp.3684-3689, 2000. ,
DOI : 10.1109/CDC.2000.912282
Maximum allowable delay bounds of networked control systems, Control Engineering Practice, vol.11, issue.11, pp.11-1301, 2003. ,
DOI : 10.1016/S0967-0661(02)00238-1
An optimization approach to control reconfiguration, Dynamics and Control, vol.9, issue.3, pp.255-270, 1999. ,
DOI : 10.1023/A:1008394805721
Reduction of linear continuous-time multivariable systems by matching first- and second-order information, IEEE Transactions on Automatic Control, vol.39, issue.10, pp.392126-2129, 1994. ,
DOI : 10.1109/9.328814
Performance of reconfiguration structures based on the constrained control, Proc. of the 17th IFAC World Congress, pp.1243-1248, 2008. ,
DOI : 10.3182/20080706-5-KR-1001.00214
Linear optimal control systems, 1972. ,
Automatique : commande des systèmes linéaires, Éditions Hermès, p.2, 1996. ,
Performance evaluation of control networks: Ethernet, ControlNet, and DeviceNet, IEEE Control Systems Magazine, vol.21, issue.1, pp.66-83, 2001. ,
DOI : 10.1109/37.898793
Network design consideration for distributed control systems, IEEE Transactions on Control Systems Technology, vol.10, issue.2, pp.297-307, 2002. ,
DOI : 10.1109/87.987076
Common stabilizers for linear control systems in the presence of actuators outage, Proc. of the American Control Conference, ACC'02, pp.2735-2739, 2002. ,
DOI : 10.1016/j.amc.2005.09.093
Reliable robust flight tracking control: an LMI approach, IEEE Transactions on Control Systems Technology, vol.10, issue.1, pp.76-89, 2002. ,
DOI : 10.1109/87.974340
Synthèse d'observateurs à entrées inconnues pour les systèmes non linéaires, Thèse de doctorat, 2007. ,
System identification. Theory for the user. Information and System Sciences Series, 1999. ,
URL : https://hal.archives-ouvertes.fr/hal-00854858
An automatic redesign approach for restructurable control systems, IEEE Control Systems Magazine, vol.5, issue.2, pp.16-22, 1985. ,
DOI : 10.1109/MCS.1985.1104940
Fault estimation and accommodation for networked control systems with transfer delay, Acta Automatica Sinica, issue.7, pp.33739-743, 2007. ,
Managing quality-of-control in ncs by controller and message scheduling co-design, IEEE Transactions on Industrial Electronics, issue.6, pp.511159-1166, 2004. ,
Fault Tolerant Control of a Three Tank Benchmark Using Weighted Predictive Control, Lecture Notes in Computer Science, issue.29, pp.45732-742, 2007. ,
DOI : 10.1007/978-3-540-72950-1_72
Principal component analysis in linear systems: Controllability, observability, and model reduction, IEEE Transactions on Automatic Control, vol.26, issue.1, pp.17-32, 1981. ,
DOI : 10.1109/TAC.1981.1102568
Diagnosis of continuous valued systems in transient operating regions, IEEE Trans. on Systems, Man and Cybernetics : Part A, issue.6, pp.29554-565, 1999. ,
Designing an observer-based controller for a network control system, Proceedings of the 44th IEEE Conference on Decision and Control, pp.848-853, 2005. ,
DOI : 10.1109/CDC.2005.1582263
An architecture for fault tolerant controllers, International Journal of Control, vol.46, issue.14, pp.781091-1110, 2005. ,
DOI : 10.1016/S0005-1098(00)00080-7
Real-time control systems with delays, Thèse de doctorat, 1998. ,
Stochastic analysis and control of real-time systems with random time delays, Automatica, vol.34, issue.1, pp.57-64, 1998. ,
DOI : 10.1016/S0005-1098(97)00170-2
A general fault-tolerant control approach: application to a winding machine, Proceedings of the 38th IEEE Conference on Decision and Control (Cat. No.99CH36304), pp.3565-3580, 1999. ,
DOI : 10.1109/CDC.1999.827907
Fault-tolerant control in dynamic systems: application to a winding machine, IEEE Control Systems Magazine, vol.20, issue.1, pp.33-49, 2000. ,
DOI : 10.1109/37.823226
Modern Control Engineering, Journal of Dynamic Systems, Measurement, and Control, vol.93, issue.1, 1997. ,
DOI : 10.1115/1.3426465
Subspace identification for linear systems. Theory, implementation, applications, 1996. ,
A scheduling method for network-based control systems, IEEE Transactions on Control Systems Technology, vol.10, issue.3, pp.318-330, 2002. ,
DOI : 10.1109/87.998012
An experimental study on the closed-loop system identification by observer/controller identification(ocid ) algorithm, Proc. of the Conference of Control Application, CCA'03, pp.37-42, 2005. ,
Fault-tolerant control systems : the 1997 situation, Proc. of the IFAC Symposium SafeProcess'97, pp.1033-1054, 1997. ,
Fault diagnosis in dynamic systems : theory and applications. Prentice Hall series in systems and control engineering, 1989. ,
Issues of Fault Diagnosis for Dynamic Systems, 2000. ,
DOI : 10.1007/978-1-4471-3644-6
Identification of linear systems by an asymptotically stable observer, pp.1-66, 1992. ,
Intelligent fault diagnosis and control reconfiguration, IEEE Control Systems, vol.14, issue.3, pp.6-12, 1994. ,
DOI : 10.1109/37.291462
A fault detection and isolation scheme for industrial systems based on multiple operating models, Control Engineering Practice, vol.16, issue.2, pp.225-239, 2008. ,
DOI : 10.1016/j.conengprac.2006.02.020
URL : https://hal.archives-ouvertes.fr/hal-00158391
Fault diagnosis and accommodation in dynamic systems; application to a DC motor, Proceedings of the 1998 American Control Conference. ACC (IEEE Cat. No.98CH36207), pp.2872-2873, 1998. ,
DOI : 10.1109/ACC.1998.688381
Actuator fault compensation for a winding machine, Control Engineering Practice, issue.10, pp.131307-1314, 2005. ,
Robust and reliable H ? output feedback control for linear systems with parameter uncertainty and actuator failure, Proc. of the Mediterranean Conference on Control and Automation, 1997. ,
Robust and reliable H??? control for linear systems with parameter uncertainty and actuator failure, Automatica, vol.32, issue.3, pp.465-467, 1996. ,
DOI : 10.1016/0005-1098(95)00149-2
Chemical Process Engineering : Design and Economics. Chemical Industries, 2003. ,
DOI : 10.1201/9780203912454
Control of state and input covariances for dynamic systems, Proceedings of the 27th IEEE Conference on Decision and Control, pp.1902-1907, 1988. ,
DOI : 10.1109/CDC.1988.194659
Minimum energy covariance controllers, Proc. of the Conference on Decision and Control, CDC'93, pp.823-824, 1993. ,
Covariance controllers for linear continuous-time systems, International Journal of Control, vol.49, issue.5, pp.1773-1785, 1989. ,
DOI : 10.1016/0022-247X(85)90133-7
A unified algebraic approach to linear control design. Control Systems Series, 1998. ,
Minimal energy covariance control, International Journal of Control, vol.59, issue.6, pp.1567-1578, 1994. ,
DOI : 10.1080/00207179408923146
On covariance control theory for linear continuous system, [1992] Proceedings of the 31st IEEE Conference on Decision and Control, pp.213-214, 1992. ,
DOI : 10.1109/CDC.1992.371754
FAULT TOLERANT CONTROL : THE PSEUDO-INVERSE METHOD REVISITED, Proc. of the 16th Triennial World Congress of the IFAC 2005, CD-ROM, 2005. ,
DOI : 10.3182/20050703-6-CZ-1902.01872
Fault tolerant control using an admissible model matching approach, Proceedings of the 44th IEEE Conference on Decision and Control, pp.2421-2426, 2005. ,
DOI : 10.1109/CDC.2005.1582525
Fault recovery by nominal trajectory tracking, 2008 American Control Conference, pp.1070-1075, 2008. ,
DOI : 10.1109/ACC.2008.4586634
URL : https://hal.archives-ouvertes.fr/hal-00349870
Just in time models for dynamical systems, Proceedings of 35th IEEE Conference on Decision and Control, pp.1115-1120, 1996. ,
DOI : 10.1109/CDC.1996.574658
Fault Tolerant Control: A Simultaneous Stabilization Result, IEEE Transactions on Automatic Control, vol.49, issue.2, pp.305-310, 2004. ,
DOI : 10.1109/TAC.2003.822999
Fault tolerant feedback control using the youla parameterization, Proc. of the European Control Conference, ECC'01, pp.1970-1974, 2001. ,
Systematization of reliable control, Proceedings of the 2002 American Control Conference (IEEE Cat. No.CH37301), pp.5110-5118, 2002. ,
DOI : 10.1109/ACC.2002.1025478
WHAT IS RELIABLE CONTROL?, Proc. of the 15th Triennial World Congress of the IFAC 2002, 2002. ,
DOI : 10.3182/20020721-6-ES-1901.00983
Fault diagnosis and accommodation of a three-tank system based on analytical redundancy, ISA Transactions, vol.41, issue.3, pp.365-382, 2002. ,
DOI : 10.1016/S0019-0578(07)60094-9
Fault-tolerant control method for actuator and component faults, Proceedings of the 37th IEEE Conference on Decision and Control (Cat. No.98CH36171), pp.604-609, 1998. ,
DOI : 10.1109/CDC.1998.760745
Observer kalman filter identification of an autonomous underwater vehicle, Control Engineering Practice, issue.6, pp.15727-739, 2007. ,
Commande et diagnostic des systèmes dynamiques, 2005. ,
Observer/Kalman Filter Identification for Online System Identification of Aircraft, Journal of Guidance, Control, and Dynamics, vol.15, issue.1, pp.347-353, 2003. ,
DOI : 10.1109/9.237648
Design of reliable control systems, Proc. of the Conference on Decision and Control, CDC'90, pp.1131-1136, 1990. ,
Design of reliable control systems, IEEE Transactions on Automatic Control, vol.37, issue.3, pp.290-304, 1992. ,
DOI : 10.1109/9.119629
Reliable linear-quadratic state-feedback control, Automatica, vol.31, issue.1, pp.137-143, 1995. ,
DOI : 10.1016/0005-1098(94)E0045-J
Gramian assignment based on the Lyapunov equation, IEEE Transactions on Automatic Control, vol.35, issue.4, pp.465-468, 1990. ,
DOI : 10.1109/9.52304
An open platform for reconfigurable control, IEEE Control Systems, vol.21, issue.3, pp.49-64, 2001. ,
DOI : 10.1109/37.924797
Feedback design in control reconfigurable systems, International Journal of Robust and Nonlinear Control, vol.6, issue.6, pp.560-570, 2000. ,
DOI : 10.1002/(SICI)1099-1239(199607)6:6<561::AID-RNC154>3.0.CO;2-W
Optimal management of redundant control authority for fault tolerance, Proceedings of the 2000 American Control Conference. ACC (IEEE Cat. No.00CH36334), pp.3730-3731, 2000. ,
DOI : 10.1109/ACC.2000.876917
Parametric modeling and fault tolerant control, 19th DASC. 19th Digital Avionics Systems Conference. Proceedings (Cat. No.00CH37126), pp.6-9, 2000. ,
DOI : 10.1109/DASC.2000.884918
Sensor fault masking of a ship propulsion system, Control Engineering Practice, issue.11, pp.141337-1345, 2006. ,
Detection, estimation, and accommodation of loss of control effectiveness, International Journal of Adaptive Control and Signal Processing, issue.7, pp.14775-795, 2000. ,
Control reconfigurability of linear time-invariant systems, Automatica, vol.36, issue.11, pp.361767-1771, 2000. ,
DOI : 10.1016/S0005-1098(00)00080-7
On reconfigurability, Proc. of the IFAC Symposium SafeProcess'00, pp.843-851, 2000. ,
An improved covariance assignment theory for discrete systems, IEEE Transactions on Automatic Control, vol.37, issue.10, pp.1588-1591, 1992. ,
DOI : 10.1109/9.256389
Reconfigurability analysis for a class of linear hybrid systems, Proc. of the 6th IFAC SafeProcess'06, pp.1033-1038, 2006. ,