B. Mathieu, Un exemple de transition d'un processus de corrosion en phase gazeuse vers une corrosion en milieu aqueux: cas de l'acier inoxydable Z2CN18-10 par l'iode et l'eau en phase vapeur

H. Jehn, Platinum losses during high temperature oxidation, Journal of the Less Common Metals, vol.78, issue.2, pp.33-41, 1981.
DOI : 10.1016/0022-5088(81)90141-7

M. Vilasi, Etude de l'oxydation et de la corrosion à haute température des phases constituives d'un alliage NiCoCrAlYTa

A. Costantini, Etude des conditions du dépôt chimique du palladium à l'hydrazine. Influence du palladium sur l'oxydation et la corrosion à haute température de la phase

G. Charlot, Les réactions chimiques en solution, Masson, p.369, 1969.

C. Lin and A. B. Bocarsly, Catalytic electrooxidation of hydrazine at the nickel ferricyanide modified electrode: can an array of surface bound one-electron redox centers act in concert?, Journal of Electroanalytical Chemistry and Interfacial Electrochemistry, vol.300, issue.1-2, pp.325-345, 1991.
DOI : 10.1016/0022-0728(91)85403-C

E. A. Van and . Meerakker, On the mechanisme of electroless plating II. One mechanism for different reductants, Journal of Applied Electrochem, issue.11, pp.395-400, 1981.

I. Ohno, O. Wakabayashi, and S. Haruyama, Anodic Oxidation of Reductants in Electroless Plating, Journal of The Electrochemical Society, vol.132, issue.10
DOI : 10.1149/1.2113572

J. Heitbaum-und-w and . Vielstich, Untersuchungen zur anodischen oxidation des hydrazins im alkalischen elektrolyten???I. Der reaktionsmechanismus an platinelektroden, Electrochimica Acta, vol.18, issue.7
DOI : 10.1016/0013-4686(73)80055-6

C. D. Iacovangelo-et-k and . Zarnoch, Substrate-Catalyzed Electroless Gold Plating, Journal of The Electrochemical Society, vol.138, issue.4
DOI : 10.1149/1.2085757

B. P. Shu, E. Grandjean, . Ghali-et-s, and . Kallagulne, Autocatalytic Effects in Electroless Deposition of Palladium, Journal of The Electrochemical Society, vol.140, issue.11
DOI : 10.1149/1.2221005

C. , H. J. Shu, B. P. Grandjean, E. Ghali-et-s, and . Kallaguine, Simultaneous deposition of Pd and Ag on porous stainless steel by electroless plating, Journal of Membrane Science, vol.14, pp.77-181, 1993.

S. Alperlne, P. Steinmetz, A. Friant-costantini-etp, and . 1oss0, Stucture et performances à haute température de revêtements d'aluminiures modifiés par le palladium: une alternative bon marché aux aluminiures de platine, p.17

Y. Fukumoto, Y. Kawashlma, K. Handaety, and . Hayashi, La déposition électrolytique de palladium en courant pulsé

C. 1. Raub, Electroplating of palladium for electrical contacts, Platinum Metals Rev, vol.2617, pp.158-166, 1982.

S. Jay, A. R. Et-s, and . Natarajan, Electrodeposition of palladium from ammine complexes". Metal Finishing, pp.81-82, 1988.

R. Le-peven, W. Levason-et-d, and . Pletcher, Studies of the electrodeposition of palladium from baths based on [Pd(NH 3 hX 2 l salts

R. Le-peven, W. Levason-et-d, and . Pletcher, Studies of palladium electrodeposition from baths based on [Pd(NH 3 hX 2 l

S. R. Jayakrishnan-et-s and . Natarajan, Hydrogen codeposition in palladium plating, Metal Finishing, pp.23-25, 1991.

R. J. Morrissey, Palladium and palladium-nickel plating
DOI : 10.1016/0026-0576(95)93374-b

R. A. Hammond, Le nickelage au bain de sulfamate". Documents Techniques -INCO EUROPE LIMlTED, p.176, 1975.

. P. Hoare, One the role of borie acid in the Watts bath

J. Horkans, On the Role of Buffers and Anions in NiFe Electrodeposition, Journal of The Electrochemical Society, vol.126, issue.11, pp.1861-1867, 1979.
DOI : 10.1149/1.2128816

M. L. Chou and H. Chen, The influence of boric acid and dissolved oxygen on the morphology of electroless palladium films, Thin Solid Films, vol.208, issue.2, pp.210-216, 1992.
DOI : 10.1016/0040-6090(92)90644-Q

P. Josso, P. Rossignol, and . Steinmetz, AJuminiures de nickel modifiés par le palladium: industrialisation des procédés (voie chimique et électrochimique)

L. A. Panteleymonov and D. N. Gubiyeva, Investigation of PdAl-Fe and PdAl-Ni alloys

Y. Mishima, S. Ochw, and T. Suzukl, Lattice parameter of Ni, Ni 3 AJ and Ni 3 Ga solid solutions with additions of transition and B-subgroup eIeme'nts

M. Hansen, Constitution of Binary Alloys, Journal of The Electrochemical Society, vol.105, issue.12, pp.118-121, 1958.
DOI : 10.1149/1.2428700

R. P. Elliott, Constitution of binary alloys" -First supplement, pp.48-49, 1965.

M. Graw-hill, . Book-company, and . Inc, Constitution of binary alloys" -Second supplement, pp.31-35, 1969.

I. Ansara, B. Sundman, and P. Willemin, Thermodynamie modeling of ordered phases in the NiAI system

N. Muamba, Contribution à l'étude de l'oxydation des revêtements d'aluminures du type NiAI, simples ou modifiés, déposés sur le nickel et des superalliages

. Ère-partie, Etude de la formation des revêtements d'aluminiures

S. Shankar and L. L. Seigle, Interdiffusion and intrinsic diffusion in the NiAI phase of the Al-Ni System

P. Villars and L. D. Calvert, Pearsonn's handbook of crystallographic data for intermetallic phases, 1991.

M. Ellner, U. Kattner, and B. Prede, Konstitutionelle und strukturelle untersuchungen im system Pd???Al, Journal of the less-Common MetaJs, pp.117-133, 1982.
DOI : 10.1016/0022-5088(82)90048-0

T. Matkovic and K. Schubert, Kristallstuktur von PdAl.r*

S. Kirkaldy, Isothermal diffusion in multicomponent system, Advances in Materials Research, pp.55-100, 1970.

J. Nesbitt and R. W. Heckel, Interdiffusion in Ni-Rich, Ni-Cr-Al alloys at 1100 and 1200 ??C: Part I. Diffusion paths and microstructures, Metallurgical Transactions A, vol.81, issue.12
DOI : 10.1007/978-1-4613-4422-3_9

J. Nesbitt and R. W. Heckel, Interdiffusion in Ni-rich, Ni-Cr-Al alloys at 1100 and 1200 ??C: Part II. Diffusion coefficients and predicted concentration profiles, Metallurgical Transactions A, vol.114, issue.12, pp.18-2075, 1987.
DOI : 10.1139/p63-211

A. Guy, V. Leroy, and T. B. Lindemer, Diffusion calculations in three-component solid solution". Engineering progress at the University of Florida, XX, pp.2-19, 1966.

M. Dayananda and C. W. Kim, Zero-flux plane and flux reversaIs in Cu-Ni-Zn diffusion couples

J. Philibert, Diffusion et transport de matière dans les solides" Les éditions de physique, p.47, 1985.

G. Lehnert and H. W. , MEINHARDT Electro-deposition Surface Treatment 1, p.189, 1972.

R. P. Seeling and R. , STUBER High temperature, High pressures, pp.207-51, 1978.

S. Alperine, P. Steinmetz, A. , and P. , Structure and high temperature performances of various palladium modified aluminide coatings : a low cost alternative to platinium aluminides, 17 1b International Conference on Material Coating ICMCIICTF 90, 1990.

M. W. Brumm and H. Grabke, The oxidation behaviour of NiAl-I. Phase transformations in the alumina scale during oxidation of NiAl and NiAl-Cr alloys, Corrosion Science, vol.33, issue.11, pp.1677-1690, 1992.
DOI : 10.1016/0010-938X(92)90002-K

F. S. Gallasso, Structure and properties of inorganic solids International series in solid state physics, 1970.

S. Lartigue and L. Priester, Etude des joints de grains dans l'Al 2 0 3 polycristalline, Matériaux et techniques, pp.163-169, 1985.

H. M. Hindam and W. W. Smeltzer, Growth and microstructure of AI 2 0 3 on NiAI, Journal of the Electrochem. Soc, vol.12757, issue.7, pp.1630-1635, 1980.

B. Pieraggi, Calculations of parabolic reaction rate constants, Oxidation of Metals, vol.24, issue.3-4, pp.177-185, 1987.
DOI : 10.1007/BF00667057

H. J. Grabke, M. Brumm, and M. Steinhorst, Development of oxidation resistant high temperature intermetallics, Materials Science and Technology, vol.230, issue.4, pp.339-344, 1992.
DOI : 10.1002/pssa.2210040115

R. Hutchings and M. H. Loretio, Compositional dependence of oxidation rates of nial and CoAI, Metal science, issue.11, pp.503-510, 1978.

N. Muamba, Contribution à l'étude de l'oxydation des revêtements d'aluminures du type NiAI, simples ou modifiés, déposés sur le nickel et des superalliages à base nickel -i ème Partie : Etude de l'oxydation des revêtements d'aluminiures NiAI

]. J. Castaing, Plasticité des céramiques Corrosion des matériaux haute température, Ecole d'hiver CNRS, 1985.

A. Kumar, M. Nasrallah, and D. L. Douglass, The effect of Y and Th on the oxidation behaviour of NiCrAI alloys, Oxid. metals, vol.863, issue.4, pp.227-263, 1974.

M. W. Brumm and H. J. Grabke, Oxidation behaviour of NiAI-II. cavity formation beneath the oxyde scale on NiAI of different stoichiometries, Corrosion science, vol.3464, pp.547-561, 1993.

O. Kubaschewsky and C. B. Alcock, Metallurgical thermochemistry, p.358

J. Jedlinsky, S. Lazarsky, S. Mrowec, and K. Przypylsky, The influence of implanted yttrium on the growth of a-AI 2 0 3 scale on I3NiAI Bulletin of the polish academy of sciences chemistry, pp.139-145, 1985.

H. M. Hindam and D. P. Whittle, Microstructure, adhesion and growth kinetics of protective scales on metals and alloys, Oxidation of Metals, vol.10, issue.5-6, pp.245-284, 1982.
DOI : 10.2320/matertrans1960.20.431

E. W. Young, J. H. De, and . Wit, The use of tracer and RES to study the oxidation mechanism of NiAJ, Solid states ionics, pp.39-46, 1985.

J. L. Smlalek, Microstructure of Al Z 0 3 sca1es formed on Ni-Cr-Al alloys, NASA TM, vol.669, p.81676, 1981.

S. M. Basu and J. W. , HALLORAN Oxidation of metals, p.67, 1989.

W. J. Quadakkers, Growth mechanisms of oxide sca1es on ODS alloys in temperature range 1000-1I00"C, Werkstoffe und korrosion, pp.41-659, 1990.

T. A. Ramarayanan, M. Raghavan, and R. Petrovic-luton, The characteristics of alumine sca1es formed on Fe-based yttria-dispersed alJoys, Journal of the Electrochem. Soc, vol.31, issue.4, pp.923-931, 1980.

F. A. Golightly, F. Stoti, and G. C. Wood, The influence of yttrium additions on the oxide-sca1e adhesion to an iron-chromium-aluminium alloy Oxidation of metal, pp.163-187, 1976.

F. A. Golightly, F. H. Stoti, and G. C. , WOOD The relationship between oxide grain morphology and growth mechanisms for Fe-Cr-Al and

J. Jedlinsky and G. Borchardt, On the oxidation mechanism of alumina formers, Oxidation of Metals, vol.41, issue.3-4, pp.317-337, 1991.
DOI : 10.1007/BF02646380

J. Jedlinsky, High temperature oxidation of alumina forming materialsDiffusion in solids and high temperature oxidation of metals

]. P. Choquet and . Zr, Etude de l'oxydation à haute température de dépôts d'alliage Ni(Co)CrAl réalisés par pulvérisation cathodique

G. Beranger, A. M. Huntz, and B. Pieraggi, Rôle des contraintes en corrosion à haute température -contraintes internes, -contraintes appliquées

C. Ecole-d-'hiver-du, G. Piau-enga1y, J. P. Bertrand, J. Larpin, and . Desmaison, Morphologie et structure des produits de corrosion