]. H. Boudali-et-dugan, J. B. Budali, and . Dugan, A new Bayesian network approach to solve dynamic fault trees. IEEE reliability and maintainability Symposium, pp.451-456, 2005.

M. Bouissou and J. L. Bon, A new formalism that combines advantages of fault tree and Markov models : Boolean logic driven Markov processes. Reliability Engineering and system safety Reliability analysis of a dynamic phased mission system. MMR, ) [Bouissou et Dutuit, 1996] M. Bouissou et Y. Dutuit. Two Approaches to Analyse a Sequential, non Coherent and Looped System. ESREL 96. Crète, juin, pp.149-164, 1996.

]. B. Brahimi, . Brahimi-]-i, A. Broster, G. Burns, and . Rodriguez-navas, Proposition d'une approche intégrée basée sur les réseaux de Petri de haut niveau pour simuler et évaluer les systèmes contrôlés en réseau Comparing real-time communication under electromagnetic interference, Thèse de doctoratBroster el al Proceedings of the 16 th Euromicro Conference on Real-Time systems, pp.45-52, 2004.

]. J. Buisson, ]. Buisson, R. Cabarbaye, and . Laulheret, Analysis of switching devices with Bond Graphs Evaluation dynamique de la sûreté de fonctionnement des systèmes dynamiques par modélisation récursive. 6 ème congrès international pluridisciplinaire, qualité et sûreté de fonctionnement, Qualita, n°6Cabarbaye et Laulheret) [CAN, 1990] Controller Area network CAN, an In-vehicle Serial Communication Protocol. SAE Handbook, pp.1165-17520, 1992.

. Carvalho, ]. A. Portugal, and P. Carvalho, On dependability evaluation of fieldbus networks: a permanent fault analysis IECON apos;01, The 27th Annual Conference of the IEEE, pp.299-304, 2001.

. Castillo, Tail uncertainty analysis in complex systems, Artificial Intelligence, vol.96, issue.2, pp.395-419, 1997.
DOI : 10.1016/S0004-3702(97)00052-0

]. L. Cauffriez, J. Ciccotelli, B. Conrard, and M. Bayart, Design of intelligent distributed control systems: dependability point of view Supervision des systèmes discontinus: définition d'un modèle hybride et pilotage en temps-réel, Reliability Engineering And System Safety, vol.4, pp.19-32, 1998.

T. Chiueh and C. Venkatramani, Supporting real-time traffic on Ethernet, 15th IEEE Real-Time Systems Symposium (RTSS'94, pp.282-286, 1994.

. Ciardo, On the solution of GSPN reward models, Performance Evaluation, vol.12, issue.4, pp.237-253, 1991.
DOI : 10.1016/0166-5316(91)90003-L

. Ciardo, A decomposition approach for stochastic reward net models, Conrard, 1999] B. Conrard, Contribution à l'évaluation quantitative de la sûreté de, pp.37-59, 1991.
DOI : 10.1016/0166-5316(93)90026-Q

C. Cruz, A calculus for network delay. I. Network elements in isolation, IEEE Transactions on Information Theory, vol.37, issue.1, pp.114-141, 1991.
DOI : 10.1109/18.61109

D. , A. David, H. Alladavid-et-allah, and ]. R. David, Du Grafcet aux réseaux de Petri Du Grafcet au réseau de Petri, deuxième édition revue augmentée, Editions Hermès Smidts. A theoretical analysis of DYLAM-type event tree sequences, Devooght et Smidts, pp.11-12, 1989.

D. Et-jarnoulle, ]. P. Doulliez, and E. Jarnoulle, Transportation networks with random arc capacities, pp.45-59, 1972.

. Dugan, Dynamic fault-tree models for computer systems Dutuit et al. Dependability modelling and evaluation by using stochastic Petri nets: application to two test cases, Dutuit et al, pp.363-377, 1992.

. Florin, An evaluation CAD tool based on stochastic Petri nets, IFIP conference on reliable computing, 1979.

F. Et-natkin, ]. G. Florin, and S. Natkin, Les réseaux de Petri Stochastiques, TSI. Fév, issue.4 1, 1985.

. Galdun, DEFINITION AND MODELLING OF THE COMMUNICATION ARCHITECTURE FOR THE CONTROL OF A HELICOPTER-DRONE, th IFAC Symposium on cost oriented automation, habana (cuba), 2007.
DOI : 10.3182/20070213-3-CU-2913.00041

URL : https://hal.archives-ouvertes.fr/hal-00167365

]. D. Gallara-et-decotignie, J. Gallara, and . Decotignie, Groupe de réflexion FIP : proposition d'un système de transmissions série multiplexée pour les échanges entre des capteurs, des actionneurs et des automates réflexes, Livre blanc, Ministère de l'Industrie (1984) [Georges, 2005] J.P. Georges. Systèmes contrôlés en réseau, p.4, 1984.

. Georges, Strict priority versus weighted fair queuing in switched ethernet networks for time critical applications, th IEEE international parallel and distributed processing symposium (IPDPS'05), 2005.

. Ghostine, Dependability evaluation of networked control systems under transmission faults. 6 th IFAC on fault detection, supervision and safety of technical processes, SafeProcess, pp.1129-1134, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00092457

. Ghostine, INFLUENCE OF TRANSMISSION FAULTS ON THE DEPENDABILITY LEVEL OF NETWORKED CONTROL SYSTEMS: APPLICATION TO A CONTROL LOOP, th IFAC Symposium on cost oriented automation, habana (cuba), 2007.
DOI : 10.3182/20070213-3-CU-2913.00025

URL : https://hal.archives-ouvertes.fr/hal-00133196

. Ghostine, How lost messages can affect the dependability of a networked control system, Qualita. Maroc Mars, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00141926

. Ghostine, A framework for the reliability evaluation of networked control systems. To appear in the 17 th IFAC World Congress, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00321441

. Goodwin, Control System Design Halevei and A.Ray, Performance Analysis of Integrated Communication and Control Systems Networks, ASME, pp.365-632, 1990.

R. Halevi, A. Halevi, and . Ray, Integrated Communication and Control Systems: Part I???Analysis, Journal of Dynamic systemsHamidi, 2005] K. Hamidi. Contribution a un modèle d'évaluation quantitative des performances fiabiliste de fonctions électroniques et programmable dédiées à la sécurité, pp.367-373, 1988.
DOI : 10.1115/1.3152698

. Hansson, Integrating Reliability and Timing Analysis of CAN-based Systems, IEEE Transaction on Industrial Electronics, vol.49, issue.6, 2002.

L. , Q. Zhao, ]. L. Hongbin, and Z. Qing, A Cut/Tie Set Method for Reliability Evaluation of Control Systems, 2005.

]. K. Jensen and . Jensen, Coloured Petri Nets Basic concepts, Analysis methods and practical use, Theoretical computer science, springer verlag, 1997.

J. Et-blum, ]. G. Juanole, and I. Blum, Influence des fonctions de base (communication ordonnancement) des systèmes distribués temps réel sur les performances d'application de contrôle-commande, 1999.

J. Et-moiney, ]. G. Juanole, and G. Mouney, QOS in Real Time Distributed Systems and Process Control Applications, Proc. Of Workshop on Networked Control Systems (NeCST), 2005.

]. F. Jumel and . Jumelkaufmann, Définition et gestion d'une qualité de service pour les applications temps réel, Modèles mathématiques pour l'étude de la fiabilité des systèmes, 1975.

]. C. Kermisch and P. E. Labeau, Approche dynamique de la fiabilité des systèmes, p.novembre, 2002.

. M. Khadiri, . Khadiri-]-s, ]. H. Khalfaoui, K. G. Kim, and . Shin, Evaluation directe et par simulation d'indices de fiabilité de réseaux de communication Méthode de recherche des scénarios redoutés pour l'évaluation de la sûreté de fonctionnement des systèmes mécatroniques du monde automobile Modelling of externally-induced/common-cause faults in fault-tolerant systems, Thèse de l'université de Rennes1 Thèse de Doctorat, Institut National Polytechnique IEEE/AIAA Digital Avionics System Conference, pp.26-402, 1992.

]. R. Koicick and Y. Sorel, De la modélisation à la réalisation : réduction du cycle de développement des applications temps réel distribuées, Proceedings of the 8th conference on Real-time and embedded systems, 2000.

]. H. Koptez, A comparison of CAN and TTP, Kosgue et al. 1996] K. Kosuge, H.Murayama and K.Takeo. Bilateral Feedback Control of Telemanipulators via Computer Network. Conf. on Intelligent Robots and Systems (IROS'96), 1998.

A. Koubaa and Y. Song, Integrating (m,k)-Firm Real- Time Constraints into Guaranteed-Rate Networks, Proceedings Real Time Systems Conference RTS, pp.1380-1385, 1996.
DOI : 10.1109/rttas.2004.1317300

URL : https://hal.archives-ouvertes.fr/inria-00108118

]. P. Labeau, A Survey on Monte Carlo Estimation of Small Failure Risks in Dynamic Reliability, International Journal of Electronics and Communications, vol.52, pp.205-211, 1998.

]. P. Labeau, Evolution de la modélisation en fiabilité dynamique Journée Fiabilité dynamique et simulation hybride, ENSAM, p.12, 2003.

. Laprie, Guide de la sûreté de fonctionnement Generalized predictive control for time-varying systems, Toulouse : Cépaduès Proceedings of the Asian Control Conference, 1994.

]. D. Lee, J. Lee, H. A. Alllan, S. Thompson, . C. Bennett-]-k et al., PID control for a distributed system with a smart actuator Control Engineering Practice 9 Performance evaluation of switched Ethernet for real-time industrial communications] Lelevé A. Contribution à la téléopération de robots en présence de délais de transmission variable, Thèse préparée à l'Université de Montpellier II, Science et Technique du Languedoc, pp.1235-1244, 2000.

L. Lian, [Locks et Satyanarayana, 1986] M.O. Locks and A. Satyanarayana. Network reliability the sate of the art, Lui et Lee, 2003] D.lui et al. AN efficient scheduling discipline for packet switching networks using earliest deadline first round robin. 12 th conference on computer communications and networks ICCCN, pp.225-235, 1986.

. Marsal, Evaluation of response time in ethernet-based automation systems. 6 th IEEE international workshop on factory communication systems, WFCS'06, pp.95-98, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00361045

]. P. Marti, . Marti, J. M. Villa, G. Fuertes, . Fohler-]-m et al., Control loop performance analysis over networked control Modelling and design of distributed real-time control application Approche unifiée défaillance/dommage dans la sûreté de fonctionnement pour la génération des matériels au combat, application aux systèmes d'armes terrestres, proceedings of the 28 th Annual Conference of the IEEE Industrial Electronics society Thèse de doctorat Contribution à l'analyse des systèmes pilotés par calculateurs: Extraction de scénarios redoutés et vérification de contraintes temporelles, pp.39-48, 1995.

. Mogavar, ]. A. Meyer, J. F. Mogavar, ]. Meyer, and . Grenoble, Performability modeling with stochastic activity network In proc of the 1984 real-time systems Symp Adaptation des applications distribuées à la Qualité de Service fournie par le réseau de communication, Moitessier et al, pp.215-224, 1984.

]. G. Moncelet, Application des réseaux de Petri à l'évaluation de la sûreté de fonctionnement des systèmes mécatroniques du monde automobile, Thèse de Doctorat, N°3076, p.9, 1998.

. Moncelet, Dependability evaluation of a simple mechatronic system using coloured Petri nets In: Workshop on Practical Use of Coloured Petri Nets and Design CPN. P:189-198, Moon and K.Kwon. Robust stability of linear systems with structured delayed perturbations. In proceedings of Sensing instrument control engineering (SICE'96), 1996.

. Tottori, N. Navet, Y. Song, and F. Simonot, Worst-Case Deadline Probability in Real-Time Applications Distributed over Controller Area Network, In: Journal of systems Architecture, vol.46, issue.1, pp.607-617, 1996.

]. J. Nilsson, Real-time control systems with delays. Ph.D. dissertation, Dept. automatic control, Lund Institute of Technology, ) [Ogata, 1987] K. Ogata. Discrete-time Control Systems, 1987.

]. J. Overstreet and . Tzes, An Internet-based real-time control engineering laboratory, IEEE Control Systems Magazine, vol.19, issue.5, pp.19-34, 1999.
DOI : 10.1109/37.793435

. Pérez, Etat de l'art en fiabilité dynamique. JD-JN-MACS, 2007.

]. S. Poledna-]-s, . J. Poledna-]-p, A. Portugal, and . Carvalho, Tolerating sensor timing faults in highly responsive hard real-time systems, ) [Poledna Proceedings of IECON'2001 27th Annual Conference of the IEEE Industrial Electronics SocietyPortugal et Carvalho 2004] P.J. Portugal, and A. Carvalho. A Stochastic Petri Net Framework for Dependability Evaluation of Fieldbus Networks ? A Controller Area Network (CAN) Example. International IEEE Conference in Mechatronics and Robotics ? MECROB, pp.181-19173, 1995.
DOI : 10.1109/12.364530

. Pritty, A realtime upgrade for Ethernet based factory networking, 21st IEEE International Conference on Industrial Electronics (IECON'95Profibus, 1996] General Purpose field communication system ? EN50170, pp.1631-1637, 1995.
DOI : 10.1109/iecon.1995.484195

. Ravichandran, Designing of PID Controller for Discrete Time Linear System Using Balanced Approach Reduced Order Model Output feedback control under randomly varying distributed delays, American Journal of Applied Sciences. Journal of Guidance Control and dynamics, vol.417, issue.3, pp.155-1594, 1994.

]. J. Richard and . Richardsrondeau, Time Delay Systems: An overview of some recent advances and open problems Study and method of Ethernet architecture segmentation for Industrial applications In: 4th IFAC Conference on Fieldbus Systems and Their Applications (FET' A comparison of bus architectures for safety-critical embedded systems Reduced base model construction methods for stochastic activity networks, Rushby 2003] J. Rushby special issue on Computer-Aided Modeling, Analysis, and Design of Communication Networks, pp.1667-1694, 1991.

S. , M. Sanders, W. H. John, F. Meyer, H. Sanders et al., Stochastic activity networks: formal definitions and concepts. Lectures on formal methods and performance analysis: first EEF/Euro summer school on trends in computer science Dependability evaluation using composed SAN-based reward models. Journal on parallel and distributed computing, special issue Petri net models of parallel computers, Thèse de Doctorat de l'Institut National Polytechnique de Lorraine, pp.315-343, 1992.

. F. Sheldon, K. Sheldon, and . Jerath, Assessing the effect of failure severity, coincident failures and usage-profiles on the reliability of embedded control systems, Proceedings of the 2004 ACM symposium on Applied computing , SAC '04, pp.826-833, 2004.
DOI : 10.1145/967900.968071

S. Et-guo, ]. G. Shin, and L. Guo, Incorporation of System Inertia into Reliability Evaluation of Real-Time Control Systems, Proceedings of the 34 th Conference on Decision & Control, 1995.

]. N. Siu, . L. Siu-]-c, and . Smith, Risk assessment for dynamic systems : An overview. Reliability engineering and system safety, Digital Computer Process Control. Intext Educational Publishers, pp.43-73, 1972.

]. T. Tarn, N. Xi, and ]. Thomesse, Planning and control of internet-based teleoperation Proceedings of SPIE: Telemanipulator and teleprence technologies A review of the Fieldbus Networked-based controller adaptation based on QoS negotiation and deterioration. The 27 th annual conference of the IEEE industrial electronics society (IECON 99 Gain adaptation of networked mobile robot to compensate QoS deterioration. The 28th annual conference of the IEEE industrial electronics society Error detection analysis of automotive communication networks, Thomesse, pp.189-19335, 1989.

. Walsh, Stability analysis of networked control systems, Proceedings of the, pp.2876-2880, 1999.
DOI : 10.1109/87.998034

. Wang, Real-Time Characteristics of Ethernet and its Improvements. The 4th world congress on Intelligent Control and Automation, Complex system reliability modelling with dynamic object oriented Bayesian networks (DOOBN). Reliability Engineering and system safety, pp.149-162, 2002.

]. C. Wilwert and . Wilwert, Influence des fautes transitoires et des performances temps réel sur la sûreté des systèmes X-by-Wire, Thèse de doctorat de L'institut national polytechnique de lorraine, p.24, 2005.

. Xia, Integrated feedback scheduling of networked control systems Journal of continuous, discrete and impulsive systems A reservation-based CSMA protocol for integrated manufacturing networks, Series B, 1992.

. Yépez, Control loop performance analysis over networked control systems, IEEE 2002 28th Annual Conference of the Industrial Electronics Society. IECON 02, 2002.
DOI : 10.1109/IECON.2002.1182853

. Zhang, Stability of networked control systems, ==0)&&(cmp4_buff->dispo->Mark()==1)&&(TM->Mark()==1)&&(IN>Mark()==0) )|| ( (cmp1_input->dispo->Mark()==0)&& (cmp2_buff->dispo->Mark()==0)&&(cmp3_buff- >dispo->Mark()==0)&&(cmp4_buff->dispo->Mark()==0)&&(cmp5_buff->dispo- >Mark()==1)&&(TM->Mark()==1)&&(IN->Mark()==0) )|| ( (cmp1_input->dispo->Mark()==0)&& (cmp2_buff->dispo->Mark()==0)&&(cmp3_buff- >dispo->Mark()==0)&&(cmp4_buff->dispo->Mark()==0)&&(cmp5_buff->dispo- >Mark()==0)&&(cmp6_buff->dispo->Mark()==1)&&(TM->Mark()==1)&&(IN>Mark()==0) )), pp.84-99, 1999.
DOI : 10.1109/37.898794