]. A. Mailfert and F. M. Sargos, Machines à réluctance variable (MRV) -Machines polyphasées -Machines excitées, Machines à Réluctance Variable, 2002.

G. O. Cimuca, S. E. Gay, M. Ehsani, R. F. Thelen, R. E. Hebner et al., Etude comparative de chaînes de conversion d'énergie dédiées à une éolienne de petite puissance Flywheel Electric Drive Characterization for Hybrid Vehicles Design and simulation of a stand-alone wind-diesel generator with a flywheel energy storage system to supply the required active and reactive power A flywheel Switched Reluctance Motor Drive for Winding Energy Application, Système inertiel de stockage énergie (Sise) associé à des générateurs éoliens Thèse présentée pour obtenir le titre de docteur de l'Institut National Polytechnique de Toulouse, 5 avril 2005. [6] Y. Gao, IEEE 31 st annual Conference on Power Electronics Specialists-PESC, pp.1381-1386, 2000.

M. F. Suemitsu, R. M. Bessa, R. Stephan, and . Nicolsky, Voltage Sags Compensation Using a Superconducting Flywheel Energy Storage System, IEEE Transactions on Applied Superconductivity, vol.15, issue.2s, pp.2265-2268, 2005.

T. S. Davies and C. M. Jefferson, Wind-power flywheel integration, Proceedings of the 24th Intersociety Energy Conversion Engineering Conference, pp.2071-2076, 1989.
DOI : 10.1109/IECEC.1989.74758

I. Takahashi, Y. Itoh, and I. Andoh, Development of a new uninterruptible power supply using flywheel energy storage techniques, Conference Record of the IEEE Industry Applications Society Annual Meeting, pp.711-716
DOI : 10.1109/IAS.1989.96727

I. Takahashi, K. Amei, and Y. Itoh, High performance and long life uninterruptible power source using a flywheel energy storage unit, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting, pp.1049-1055
DOI : 10.1109/IAS.1990.152314

J. A. Bleijs, L. L. Freris, D. G. Infield, A. J. Ruddell, and G. A. Smith, A Wind/diesel System With Flywheel Energy Buffer, Proceedings. Joint International Power Conference Athens Power Tech,, pp.995-999, 1993.
DOI : 10.1109/APT.1993.673944

H. Akagi and H. Sato, Control and performance of a flywheel energy storage system based on a doubly-fed induction generator-motor for power conditioning, 30th Annual IEEE Power Electronics Specialists Conference. Record. (Cat. No.99CH36321), pp.32-39
DOI : 10.1109/PESC.1999.788977

H. Aagi and H. Sato, Control and performance of a doubly-fed induction machine intended for a flywheel energy storage system, IEEE Transactions on Power Electronics, vol.17, issue.1, pp.109-116, 2002.
DOI : 10.1109/63.988676

I. Alan and T. A. Lipo, Induction machine based flywheel energy storage system, IEEE Transactions on Aerospace and Electronic Systems, vol.39, issue.1, pp.151-163, 2003.
DOI : 10.1109/TAES.2003.1188900

R. F. Thelen, J. D. Herbest, and M. T. Caprio, A 2 MW flywheel for hybrid locomotive power, 2003 IEEE 58th Vehicular Technology Conference. VTC 2003-Fall (IEEE Cat. No.03CH37484), pp.3231-3235, 2003.
DOI : 10.1109/VETECF.2003.1286244

URL : https://repositories.lib.utexas.edu/bitstream/2152/33083/1/PN_276_Thelen.pdf

S. Samineni, B. K. Johnson, H. L. Hess, and J. D. Law, Modelling and analysis of a flywheel energy storage system for voltage sag correction, IEEE International Electric Machines and Drives Conference-IEMDC'03, pp.1813-1818, 2003.

J. C. Andreas, Energy-Efficient Electric Motors. Selection and Application, Second Edition, 1992.

I. Boldea and S. A. Nasar, Induction Machines Handbook, 2002.
DOI : 10.1201/9781420042658

M. Ehsani, K. M. Rahman, and H. A. Tlyat, Propulsion system design of electric and hybrid vehicles, IEEE Transactions on Industrial Electronics, vol.44, issue.1, 1997.
DOI : 10.1109/41.557495

T. S. Davies and N. Larsen, A regenerative drive for incorporating flywheel energy storage into wind generation systems, Proceedings of the 24th Intersociety Energy Conversion Engineering Conference, pp.2065-2069, 1989.
DOI : 10.1109/IECEC.1989.74757

H. Weh, A. Steingrover, H. May, and C. Wrede, Highly efficient inertial energy storage, Symposium on Power electronics, Industrial Drives, Power Quality, Traction System-SPEEDAM, 1996.

W. Wensen, Z. Danhong, H. Hofmann, J. Noland, and C. E. Bakis, Design of highspeed permanent magnet machines with anisotropic electromagnetic and structural continuum formulations " IEEE International Electric Machines and Drives Conference-IEMDC'03, pp.1-4, 2003.

P. Tsao, M. Senesky, and S. R. Sanders, A synchronous homopolar machine for highspeed applications, Conf. IEEE ?IAS Annu. Meeting, pp.406-416, 2002.
DOI : 10.1109/ias.2002.1044119

P. Tsao, M. Senesky, and S. R. Sanders, An integrated flywheel energy storage system with homopolar inductor motor/generator and high-frequency drive, IEEE Transactions on Industry Applications, vol.39, issue.6, 2003.
DOI : 10.1109/TIA.2003.818992

URL : http://power.eecs.berkeley.edu/publications/Tsao_integ_flywheel_IA.pdf

H. Hofmann, S. R. Sanders, and A. El-antably, Stator-Flux-Oriented Vector Control of Synchronous Reluctance Machines With Maximized Efficiency, IEEE Transactions on Industrial Electronics, vol.51, issue.5, pp.1066-1072, 2004.
DOI : 10.1109/TIE.2004.834968

T. Fukao, A. Chiba, and M. Matsui, Test results on a super-high-speed amorphous-iron reluctance motor, IEEE Transactions on Industry Applications, vol.25, issue.1, pp.119-125, 1989.
DOI : 10.1109/28.18881

I. Boldea, Z. X. Fu, and S. A. Nasar, Performance evaluation of axially-laminated anisotropic (ALA) rotor reluctance synchronous motors, IEEE Transactions on Industry Applications, vol.4, issue.s, pp.977-985, 1994.

H. Hofmann and S. R. Sanders, Synchronous reluctance motor/alternator for flywheel energy storage systems, Power Electronics in Transportation, pp.199-206, 1996.
DOI : 10.1109/PET.1996.565929

O. Gergaud, H. B. Ahmed, B. Multon, and N. Bernard, Nouvelle architecture électromagnétique à réluctance variable excite pour accumulateur d'énergie, Revue Internationale de Génie Electrique, vol.4, pp.3-4367, 2001.

N. Bernard, H. B. Ahmed, and B. Multon, Design and Modeling of a Slotless and Homopolar Axial-Field Synchronous Machine for a Flywheel Accumulator, IEEE Transactions on Industry Applications, vol.40, issue.3, pp.755-762, 2004.
DOI : 10.1109/TIA.2004.827447

N. Bernard, Présentation et pré-dimensionnement d'un moteur/générateur synchrone pour accumulateur électromécanique énergie JCGE'01, Colloque des Jeunes Chercheurs en Génie Electrique, pp.13-14, 2001.
DOI : 10.3166/rige.5.9-22

A. H. Ben, C. Kerzreho, J. Y. Cognard, J. Delamarre, B. Multon et al., Moteur/générateur à réluctance excitée et à bobinage dans l'entrefer " , brevet international PCT, p.3459, 2000.

C. Kerzreho, J. Y. Cognard, and G. Dumont, Définition et optimisation de la structure d'une batterie électromécanique intégrée " 14ème Congrès Français de Mécanique

M. Leroy, Etude et mise au point de motoventilateurs à hautes performances pour l'aéronautique, thèse de l'Institut National Polytechnique de Toulouse, 2006.

H. Hofmann and S. R. Sanders, High-speed synchronous reluctance machine with minimized rotor losses, IEEE Transactions on Industry Applications, vol.36, issue.2, pp.531-539, 2000.
DOI : 10.1109/28.833771

URL : http://www-power.eecs.berkeley.edu/publications/hofmann_sanders_high_speed_tran.pdf

J. P. Barton and D. G. Infield, Energy Storage and Its Use With Intermittent Renewable Energy, IEEE Transactions on Energy Conversion, vol.19, issue.2, pp.441-448, 2004.
DOI : 10.1109/TEC.2003.822305

. Brochure, Energie Storage-A Key Technology for Decentralized Power, Power Quality and Clean Transport, Office for official Publication of the European Communities, 2001.

R. Tsarafidy, Optimisation des performances des machines synchroreluctantes par réseaux perméances Thèse présentée à l'Institut National Polytechnique de Lorraine pour l'obtention du Doctorat de l'I, N.P.L, 2006.

I. Boldea, Réluctance synchronous machines and drives, 1996.

F. M. Tabar, Etude d'une machine synchrone à réluctance variable pour des applications à grande vitesse " Thèse présentée à l'Institut National Polytechnique de Lorraine pour l'obtention du Doctorat de l'I, 1986.

P. Dmitry, Contribution à la modélisation et à la conception optimale des turbo-alternateurs de faible puissance, Thèse présentée à l'Ecole Centrale de Lille pour l'obtention du Doctorat de l'Ecole Centrale de Lille, 2007.

M. Hecquet and P. Brochet, Mod??lisation d'un alternateur automobile par un r??seau de perm??ances coupl?? ?? des circuits ??lectriques, Journal de Physique III, vol.6, issue.8, pp.1099-1116, 1996.
DOI : 10.1051/jp3:1996171

L. Albert, Modélisation et optimisation des alternateurs à griffes application au domaine automobile, thèse pour obtenir le grade de Docteur de L'INPG spécialité Génie électrique, 2004.

T. Raminosoa, I. Rasoanarivo, C. Belalahy, and F. M. Sargos, Modélisation par réseau de perméances d'une machine synchro-réluctante à rotor massif ou à barrières de flux en tenant compte de la saturation, Electrotechnique du Futur, 2005.

T. Raminosoa, I. Rasoanarivo, F. M. Sargos, and R. N. Andriamalala, Constrained Optimization of High Power Synchronous Reluctance Motor Using Non Linear Reluctance Network Modeling, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting
DOI : 10.1109/IAS.2006.256684

T. Raminosoa, I. Rasoanarivo, C. Belalahy, and F. M. Sargos, Time Stepping Simulation of Synchronous Reluctance Motors Using Non Linear Reluctance Network Method, IECON 2006, 32nd Annual Conference on IEEE Industrial Electronics, pp.976-981, 2006.
DOI : 10.1109/IECON.2006.347287

T. Raminosoa, I. Rasoanarivo, F. M. Tabar, and F. M. Sargos, Time Stepping Simulation of Synchronous Reluctance Motors Using Non Linear Reluctance Network Method, IECON 2006, 32nd Annual Conference on IEEE Industrial Electronics, 2008.
DOI : 10.1109/IECON.2006.347287

M. Hecquet and P. Brochet, Time variation of forces in a synchronous machine using electric coupled network model, IEEE Transactions on Magnetics, vol.34, issue.5, 1998.
DOI : 10.1109/20.717754

URL : https://hal.archives-ouvertes.fr/hal-01713797

D. Petrichenko, M. Hecquet, P. Brochet, V. Kuznetsov, and D. Laloy, Design and simulation of turbo-alternators using a coupled permeance network model, IEEE Transactions on Magnetics, vol.42, issue.4, pp.1259-1262, 2006.
DOI : 10.1109/TMAG.2006.871995

V. Ostovic, J. M. Miller, V. K. Garg, R. D. Schultz, and S. H. Swales, Amagnetic equivalent circuit based performance comutation of a lyndell alternator, IEEE transaction on industry applications, vol.35, issue.4, 1999.

G. Henneberger and R. Block, Numerical calculation and simulation of a claw-pole alternator, Proceedigns ICEM, pp.127-131, 1992.

G. Henneberger and S. Küppers, Numerical procedures for the calculation and desing of automotive alternators, IEEE Transactions on Magnétics, vol.33, issue.2, 1997.

R. J. Hull, S. J. Krefta, and . Shields, Analytical derivation of a coupled-circuit model of a claw-pole alternator with concentrated stator windings, IEEE Trans. On Ener

Y. G. Guo, J. G. Zhu, P. A. Watterson, and W. Wu, Comparative study of 3D flux electrical machines with soft magnetic composite cores, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344)
DOI : 10.1109/IAS.2002.1042704

D. Meeker and . Finit, Element Method Magnetics, 2003.

M. Liwschitz, L. Maret, and D. Ingénieur, Calcul des machines électriques Tome I " , Bibiliothèque de l'ingénieur-Dunod, 1967.

F. M. Sargos, Etude théorique des performances des machines à réluctance variable, Thèse de Doctorat INPL, 1981.

M. Jufer, Electromécanique, Traité d'électricité, Presse Polytechnique romande, 1995.

P. Tsao, M. Senesky, and S. Senders, A synchronous homopolar machine for high-speed applications, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344), pp.406-416, 2002.
DOI : 10.1109/IAS.2002.1044119

P. Tsao, M. Senesky, and S. Senders, An Integrated Fly-wheel Energy Storage System with Homopolar Inductor Motor / Generator and high Frequency Drive, IEEE Trans

I. Boldea, L. Tutelea, and C. I. Pitic, PM-Assisted Reluctance Synchronous Motor/Generator (PM-RSM) for Mild Hybrid Vehicles: Electromagnetic Design, IEEE Transactions on Industry Applications, vol.40, issue.2, pp.492-498, 2004.
DOI : 10.1109/TIA.2004.824434

B. Bekkouche, A. Chaouch, and Y. Mezari, A Switched Reluctance Motors Analyse using Permeance Network Method, International Journal of Applied Engineering Research, vol.1, issue.2, pp.137-152, 2006.

M. A. Ramlan and M. R. Tamjis, Simplified 3-D Unaligned Permeance Model for Derivation of Magnetisation Characteristics, from Proceeding (369) European Power and Energy Systems, 2002.

A. Parviainen, M. Niemela, and J. Pyrhonen, Modeling of Axial Flux Permanent-Magnet Machines, IEEE Transactions on Industry Applications, vol.40, issue.5, pp.1333-1340, 2004.
DOI : 10.1109/TIA.2004.834086

A. Vahedi, Modélisation et caractérisation des machines synchro-reluctantes saturées par des méthodes numeriques Thèse présentée à l'Institut National Polytechnique de Lorraine pour l'obtention du Doctorat de l'I, 1996.

C. Belalahy, I. Rasoanarivo, T. Raminosoa, and F. M. Sargos, Optimisation des performances d'une génératrice MRV triphasée à excitation homopolaire à double bobinage statorique et à double rotor massif, Electrotechnique du Futur (EF'05), 2005.

C. Belalahy, I. Rasoanarivo, T. Raminosoa, and F. M. Sargos, Pre-Design and Optimization of three phase homopolar SRM with double stator winding and double massive rotor

C. Belalahy, I. Rasoanarivo, S. Rael, and F. M. Sargos, Design of three phase homopolar SRM with double stator winding and double massive rotor, p.7

C. Belalahy, I. Rasoanarivo, and F. M. Sargos, 3-D reluctance network modeling of a synchronous homopolar machine, p.8

C. Belalahy, I. Rasoanarivo, T. Raminosoa, and F. M. Sargos, Using 3D reluctance network for design a three phase synchronous homopolar machine, 2008 34th Annual Conference of IEEE Industrial Electronics
DOI : 10.1109/IECON.2008.4758275