.. De-la-cuve-agitée-au-micromélangeur, surface libre : influence du point d'injection sur la taille des capsules, p.97

.. Porosité-mesurée-par-analyse-d-'image, 137 4.2.3.1 Cas du mélangeur deux temps, p.141

T. Etude-des, 160 5.1.1.1 Estimation des temps caractéristiques, p.161

T. De and P. , 164 5.2.2 Cinétique de formation de la membrane, p.166
URL : https://hal.archives-ouvertes.fr/in2p3-00256089

.. Etude-de-la-rupture-de-la-phase-dispersée, 168 5.3.1 Rupture d'une goutte liquide, p.171

.. Rupture-d-'une-particule-solide, 172 5.3.2.1 Théorie sur la rupture d'une capsule solide, Interprétation, p.174

. Mabile, Force de cisaillement en fonction de la pression de Laplace des gouttes résultantes . La linéarisation donne une pente de 0, pp.87-124, 2003.

.. Le-nombre-de-capillarité, Ca cr ) en fonction du rapport des viscosités (p) entre les phases interne et externe, p.38

. Löwe, a : Mise en contact de deux sous-courants, b : Collision de deux sous-courants de haute énergie, c : Injection de nombreux petits sous-courants d'un composant dans un courant principal d'un autre composant, d : Injection de nombreux souscourants de deux composants, e : Diminution des trajets de diffusion de la perpendiculaire jusqu'à la direction du flux en augmentant la vitesse du flux, f : Division et recombinaison des distributeurs, g : Transport massique forcé extérieurement (ultrason ou énergie électrique), h : Injection périodique de petits segments de fluide, Dispositions génériques des flux basées sur des concepts de mélanges différents pour le développement de micromélangeur, p.42, 2000.

. Ehrfeld, Deux conceptions plaquettaires basées sur canaux courbés (à gauche) ou droits (à droite) Les plaquettes sont empilées en couche et alimentées alternativement par deux liquides différents, p.44, 2000.

. .. Tableau-de-la-densité-apparente, de l'épaisseur de la membrane et de l'épaisseur de membrane normée par le rayon des capsules pour des différents lots de capsules obtenues en cuve agitée dans le cas, p.138

. Tableau-de-la, de l'épaisseur de la membrane et de l'épaisseur de membrane normée par le rayon des capsules pour des différents lots de capsules réalisées en micromélangeur dans le cas, p.138

. Tableau-présentant-le-span,-le-diamètre-moyen......., le taux d'humidité, la perte de masse après 4h et la vitesse de désorption de capsules obtenues pour différents débits de phases organique et aqueuse avec le micromélangeur et pour différentes vitesses d'agitation pour la cuve agitée avec une concentration en PVA de 3% w . Les capsules fabriquées en cuve agitée ont été réalisées dans une cuve sans chicane avec un diamètre d, p.152

K. W. Altena and C. A. Smolders, Calculation of liquid-liquid phase separation in a ternary system of a polymer in a mixture of a solvent and a nonsolvent, Macromolecules, vol.15, issue.6, pp.1491-1497, 1982.
DOI : 10.1021/ma00234a008

K. Andrieux, D. Desmaele, J. D. Angelo, and P. Couvreur, Nanotechnologies and new drugs, Actualité Chimique, pp.135-139, 2003.

R. Arshady, Microcapsules for food, Journal of Microencapsulation, vol.51, issue.5, pp.415-455, 1992.
DOI : 10.1111/j.1365-2621.1986.tb13111.x

R. W. Baker and H. K. Lonsdale, Controlled Release: Mechanisms and Rates, pp.15-71, 1974.
DOI : 10.1007/978-1-4684-7239-4_2

A. D. Bangham, M. M. Standish, and J. C. Watkins, Diffusion of univalent ions across the lamellae of swollen phospholipids, Journal of Molecular Biology, vol.13, issue.1, pp.238-252, 1965.
DOI : 10.1016/S0022-2836(65)80093-6

Y. Barenholz, Liposome application: problems and prospects, Current Opinion in Colloid & Interface Science, vol.6, issue.1, pp.66-77, 2001.
DOI : 10.1016/S1359-0294(00)00090-X

J. P. Benoit, P. Couvreur, J. P. Devissaguet, H. Fessi, and F. Puisieux, Roblot-Treupel. « carrier »or « modulated distribution »forms, new systems for drug administration], Journal de pharmacie de Belgique, issue.5, pp.41319-41348, 1986.

G. Birrenbach and P. Speider, Polymerized Micelles and Their Use as Adjuvants in Immunology, Journal of Pharmaceutical Sciences, vol.65, issue.12, pp.1763-1766, 1976.
DOI : 10.1002/jps.2600651217

D. Bökenkamp, A. Desai, X. Yang, Y. C. Tai, E. M. Marzluff et al., Microfabricated Silicon Mixers for Submillisecond Quench-Flow Analysis, Analytical Chemistry, vol.70, issue.2, pp.232-236, 1998.
DOI : 10.1021/ac9708250

M. Bouquey, C. Serra, N. Berton, L. Prat, and G. Hadziioannou, Microfluidic synthesis and assembly of reactive polymer beads to form new structured polymer materials, Microreaction Technology IMRET 9 : Proceedings of the Ninth International Conference on Microreaction Technology -IMRET9 Special Issue, pp.93-98, 2008.
DOI : 10.1016/j.cej.2007.07.043

URL : https://hal.archives-ouvertes.fr/hal-00402970

F. Boury, . Tz, I. Ivanova, J. E. Panaïotov, A. Proust et al., Dynamic Properties of Poly(DL-lactide) and Polyvinyl Alcohol Monolayers at the Air/Water and Dichloromethane/Water Interfaces, Journal of Colloid and Interface Science, vol.169, issue.2, pp.380-392, 1995.
DOI : 10.1006/jcis.1995.1047

J. Branebjerg, P. Gravesen, J. P. Krog, and C. R. Nielsen, Fast mixing by lamination, Proceedings of Ninth International Workshop on Micro Electromechanical Systems, pp.441-446, 1996.
DOI : 10.1109/MEMSYS.1996.494022

C. S. Brazel, Microencapsulation : offering solutions for the food industry, Cereal Food World, vol.44, pp.388-393, 1999.

R. S. Brodkey, Transport phenomena : a unified approach. Mc Graw-hill, 1988.

J. W. Cahn, Spinodal decomposition, Trans. Metal. Soc AIME, vol.242, pp.166-180, 1968.

K. S. Chang and W. L. Olbricht, Experimental studies of the deformation and breakup of a synthetic capsule in steady and unsteady simple shear flow, Journal of Fluid Mechanics, vol.40, issue.-1, pp.609-633, 1993.
DOI : 10.1115/1.3422928

K. S. Chang and W. L. Olbricht, Experimental studies of the deformation of a synthetic capsule in extensional flow, Journal of Fluid Mechanics, vol.45, issue.-1, pp.587-608, 1993.
DOI : 10.1115/1.3424231

L. P. Cheng, Y. S. Soh, A. Dwan, and C. C. Gryte, An improved model for mass transfer during the formation of polymeric membranes by the immersion-precipitation process, Journal of Polymer Science Part B: Polymer Physics, vol.32, issue.8, pp.1413-1425, 1994.
DOI : 10.1002/polb.1994.090320813

C. Cohen, G. B. Tanny, and S. Prager, Diffusion-controlled formation of porous structures in ternary polymer systems, Journal of Polymer Science: Polymer Physics Edition, vol.17, issue.3, pp.477-489, 1979.
DOI : 10.1002/pol.1979.180170312

P. Couvreur, M. Roland, and P. Speiser, Submicroscopic biodegradable particles containing a biologically-active substance, 1979.

C. Cramer, P. Fischer, and E. J. Windhab, Drop formation in a co-flowing ambient fluid, Chemical Engineering Science, vol.59, issue.15, pp.3045-3058, 2004.
DOI : 10.1016/j.ces.2004.04.006

P. K. Das, J. Legrand, P. Morançais, and G. Carnelle, Drop breakage model in static mixers at low and intermediate Reynolds number, Chemical Engineering Science, vol.60, issue.1, pp.231-238, 2005.
DOI : 10.1016/j.ces.2004.08.003

W. Ehrfeld, C. Gärtner, K. Golbig, V. Hessel, R. Konrad et al., Fabrication of Components and Systems for Chemical and Biological Microreactors, Microreaction Technology : 1 st International Conference on Microreaction Technology, pp.72-90, 1997.
DOI : 10.1007/978-3-642-72076-5_9

W. Ehrfeld, K. Golbig, V. Hessel, H. Löwe, and T. Richter, Characterization of Mixing in Micromixers by a Test Reaction:?? Single Mixing Units and Mixer Arrays, Industrial & Engineering Chemistry Research, vol.38, issue.3, pp.1075-1082, 1999.
DOI : 10.1021/ie980128d

W. Ehrfeld, V. Hessel, V. Haverkamp, and . Microreactor, Ullmann's Encyclopedia of Industrial Chemistry, 1999.

W. Ehrfeld, V. Hessel, and H. Löwe, Microreactor : New technology for modern chemistry, 2000.

D. H. Evrett, Definitions, terminology and symbols in colloid and surface chemistry -Part I, Appendix to manual of symbol and terminology for physicochemical quantities and units, Pure and Applied Chemistry, vol.31, pp.579-638, 1972.

T. Floyd, A novel microchemical system for rapid liquid-liquid chemistry, Thèse de doctorat, 2005.

S. Freitas, H. P. Merkle, and B. Gander, Microencapsulation by solvent extraction/evaporation: reviewing the state of the art of microsphere preparation process technology, Journal of Controlled Release, vol.102, issue.2, pp.313-332, 2005.
DOI : 10.1016/j.jconrel.2004.10.015

S. Freitas, B. Rudolf, H. P. Merkle, and B. Gander, Flow-through ultrasonic emulsification combined with static micromixing for aseptic production of microspheres by solvent extraction, European Journal of Pharmaceutics and Biopharmaceutics, vol.61, issue.3, pp.61181-187, 2005.
DOI : 10.1016/j.ejpb.2005.05.004

J. R. Fried, Polymer Science and Technology, 1995.

F. Gabor, B. Ertl, M. Wirth, and R. Mallinger, Ketoprofen-poly(D,L-lactic-co-glycolic acid) microspheres: influence of manufacturing parameters and type of polymer on the release characteristics, Journal of Microencapsulation, vol.31, issue.1, pp.1-12, 1999.
DOI : 10.1016/0168-3659(94)90012-4

S. Galindo-rodriguez, E. Alle´mann, H. Fessi, and E. Doelker, Physicochemical Parameters Associated with Nanoparticle Formation in the Salting-Out, Emulsification-Diffusion, and Nanoprecipitation Methods, Pharmaceutical Research, vol.21, issue.8, pp.1428-1439, 2004.
DOI : 10.1023/B:PHAM.0000036917.75634.be

M. Gao, P. Zhang, G. Hong, X. Guan, G. Yan et al., Novel monolithic enzymatic microreactor based on single-enzyme nanoparticles for highly efficient proteolysis and its application in multidimensional liquid chromatography, Journal of Chromatography A, vol.1216, issue.44, 2009.
DOI : 10.1016/j.chroma.2009.05.003

R. Gelles and C. W. Frank, Phase separation in polystyrene/poly(vinyl methyl ether) blends as studied by excimer fluorescence, Macromolecules, vol.15, issue.6, pp.1486-1491, 1982.
DOI : 10.1021/ma00234a007

B. F. Gibbs, S. Kermasha, I. Alli, and C. N. Mulligan, Encapsulation in the food industry : a review, International Journal of Food Sciences and Nutrition, vol.50, pp.213-224, 1999.

H. P. Grace, DISPERSION PHENOMENA IN HIGH VISCOSITY IMMISCIBLE FLUID SYSTEMS AND APPLICATION OF STATIC MIXERS AS DISPERSION DEVICES IN SUCH SYSTEMS, Chemical Engineering Communications, vol.10, issue.3-6, pp.225-277, 1982.
DOI : 10.1002/aic.690150512

R. Gurny, N. A. Peppas, D. D. Harrington, and G. S. Banker, Development of Biodegradable and Injectable Latices for Controlled Release of Potent Drugs, Drug Development and Industrial Pharmacy, vol.7, issue.1, pp.1-25, 1981.
DOI : 10.1002/jps.2600650610

V. Haverkamp, W. Ehrfeld, K. Gebauer, V. Hessel, H. Löwe et al., The potential of micromixers for contacting of disperse liquid phases, Fresenius' Journal of Analytical Chemistry, vol.364, issue.7, pp.617-624, 1999.
DOI : 10.1007/s002160051397

V. Hessel and H. Löwe, Microchemical Engineering: Components, Plant Concepts User Acceptance - Part I, Chemical Engineering & Technology, vol.77, issue.5, pp.13-24, 2003.
DOI : 10.1002/cite.330680945

J. O. Hinze, Fundamentals of the hydrodynamic mechanism of splitting in dispersion processes, AIChE Journal, vol.1, issue.3, pp.289-295, 1955.
DOI : 10.1002/aic.690010303

K. F. Jensen, Smaller, faster chemistry, Nature, vol.390, issue.6687, pp.735-736, 1998.
DOI : 10.1038/37764

J. Y. Kim, Y. D. Kim, H. K. Toshiyuki, K. J. Lee, S. C. Baik et al., Vitrification phenomena in polysulfone/NMP/water system, Journal of Applied Polymer Science, vol.36, issue.3, pp.431-438, 1999.
DOI : 10.1007/978-94-017-0835-7

J. B. Knight, A. Vishwanath, J. P. Brody, and R. H. Austin, Hydrodynamic Focusing on a Silicon Chip: Mixing Nanoliters in Microseconds, Physical Review Letters, vol.79, issue.17, pp.3863-3866, 1998.
DOI : 10.1007/978-1-4612-4244-4

M. Kraume, A. Gäbler, and K. Schulze, Influence of Physical Properties on Drop Size Distribution of Stirred Liquid-Liquid Dispersions, Chemical Engineering & Technology, vol.27, issue.3, pp.330-334, 2004.
DOI : 10.1002/ceat.200402006

J. Kubota, N. Hirabayashi, A. Kato, and . Yoshizawa, Microreactor utilized preparation of monodispersed polymeric microcapsules by urea/formaldehyde phase separation method, Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol.302, issue.1-3, pp.320-325, 2007.
DOI : 10.1016/j.colsurfa.2007.02.062

B. Kunst, D. Skevin, G. Dezelic, and J. J. Petres, A light-scattering and membrane formation study on concentrated cellulose acetate solutions, Journal of Applied Polymer Science, vol.20, issue.5, pp.1339-1353, 1976.
DOI : 10.1002/app.1976.070200517

J. J. Lerou, M. P. Harold, J. Ryley, J. Ashmead, T. C. O-'brien et al., Microfabricated mini-chemical systems : technical feasibility, Microsystem Technology for Chemical and Biological Microreactors, 1996.

M. Li, O. Rouaud, and D. Poncelet, Microencapsulation by solvent evaporation: State of the art for process engineering approaches, International Journal of Pharmaceutics, vol.363, issue.1-2, pp.26-39, 2008.
DOI : 10.1016/j.ijpharm.2008.07.018

W. Li, D. Gersappe, G. H. Ko, M. Asahi, Y. Takashima et al., Protection of Colloidal Suspensions with Random Poly(vinyl acetate) Copolymers, Langmuir, vol.17, issue.13, pp.173871-3876, 2001.
DOI : 10.1021/la0018134

W. I. Li, K. W. Anderson, and P. P. Deluca, Kinetic and thermodynamic modeling of the formation of polymeric microspheres using solvent extraction/evaporation method, Journal of Controlled Release, vol.37, issue.3, pp.187-198, 1995.
DOI : 10.1016/0168-3659(95)00077-1

W. I. Li, K. W. Anderson, R. C. Mehta, and P. P. Deluca, Prediction of solvent removal profile and effect on properties for peptide-loaded PLGA microspheres prepared by solvent extraction/ evaporation method, Journal of Controlled Release, vol.37, issue.3, pp.199-214, 1995.
DOI : 10.1016/0168-3659(95)00076-3

K. Lin, D. Wang, and J. Lai, Nonsolvent-Induced Gelation and Its Effect on Membrane Morphology, Macromolecules, vol.35, issue.17, pp.6697-6706, 2002.
DOI : 10.1021/ma020073y

H. Löwe, W. Ehrfeld, V. Hessel, T. Richter, and J. Schiewe, Micromixing technology, 4th International Conference on Microreaction Technology, pp.31-47, 2000.

M. D. Luccio, R. Nobrega, and C. P. Borges, Microporous anisotropic phase inversion membranes from bisphenol-A polycarbonate: study of a ternary system, Polymer, vol.41, issue.11, pp.4309-4315, 2000.
DOI : 10.1016/S0032-3861(99)00653-9

Y. Maa and C. Hsu, Microencapsulation reactor scale-up by dimensional analysis, Journal of Microencapsulation, vol.27, issue.8, pp.53-66, 1996.
DOI : 10.3109/02652049109021238

C. Mabile, F. Leal-calderon, J. Bibette, and V. Schmitt, Monodisperse fragmentation in emulsions: Mechanisms and kinetics, Europhysics Letters (EPL), vol.61, issue.5, pp.708-714, 2003.
DOI : 10.1209/epl/i2003-00133-6

J. E. Mark, Polymer Data Handbook, 1999.

R. Miyake, T. S. Lammerink, M. Elwenspoek, and J. H. Fluitman, Micromixer with fast diffusion, pp.248-253, 1993.

W. R. Moser, Advanced Catalysts and Nanostructured Materials, 1996.

S. Mourtas, S. Fotopoulou, S. Duraj, V. Sfika, C. Tsakiroglou et al., Liposomal drugs dispersed in hydrogels, Colloids and Surfaces B: Biointerfaces, vol.55, issue.2, pp.212-221, 2007.
DOI : 10.1016/j.colsurfb.2006.12.005

M. H. Mulder, Basic Principles of Membrane Technology. Elsvier, 1991.

H. Okada, One- and three-month release injectable microspheres of the LH-RH superagonist leuprorelin acetate, Advanced Drug Delivery Reviews, vol.28, issue.1, pp.43-70, 1997.
DOI : 10.1016/S0169-409X(97)00050-1

P. Omarjee, A. Espert, and O. Mondain, Polymer-Induced Repulsive Forces at Solid???Liquid and at Liquid???Liquid Interfaces, Langmuir, vol.17, issue.18, pp.5693-5695, 2001.
DOI : 10.1021/la010198g

H. Pennemann, S. Hardt, V. Hessel, P. Löb, and F. Weise, Micromixer Based Liquid/Liquid Dispersion, Chemical Engineering & Technology, vol.38, issue.1, pp.501-508, 2005.
DOI : 10.1002/ceat.200407144

D. C. Peters, Dynamics of emulsification, pp.295-321, 1992.
DOI : 10.1016/B978-075063760-2/50035-4

K. F. Pistel, B. Bittner, H. Koll, G. Winter, and T. Kissela, Biodegradable recombinant human erythropoietin loaded microspheres prepared from linear and star-branched block copolymers: Influence of encapsulation technique and polymer composition on particle characteristics, Journal of Controlled Release, vol.59, issue.3, pp.309-325, 1999.
DOI : 10.1016/S0168-3659(99)00008-5

G. L. Plosker and R. N. Brogden, Leuprorelin, Drugs, vol.48, issue.6, pp.930-967, 1994.
DOI : 10.2165/00003495-199448060-00008

D. Poncelet, Microencapsulation : Fundamentals, methods and application, 23?34, 2006.
DOI : 10.1007/1-4020-4741-x_3

F. Puel, S. Briançon, and H. Fessi, Industrial Technologies and scale-up, pp.149-182, 2006.
URL : https://hal.archives-ouvertes.fr/hal-01273208

R. C. Reid, J. M. Prausnitz, and B. E. Polig, The Properties of Liquids and Gases, 4 th Ed, 1987.

Y. Y. Renardy and V. Cristini, Effect of inertia on drop breakup under shear, Physics of Fluids, vol.320, issue.1, pp.7-13, 2001.
DOI : 10.1063/1.869313

A. J. Reuvers, J. W. Van-den-berg, and C. A. Smolders, Formation of membranes by means of immersion precipitation, Journal of Membrane Science, vol.34, issue.1, pp.45-65, 1987.
DOI : 10.1016/S0376-7388(00)80020-4

I. Ribeiro-dos-santos, J. Richard, B. Pech, C. Thies, and J. P. Benoit, Microencapsulation of protein particles within lipids using a novel supercritical fluid process, International Journal of Pharmaceutics, vol.242, issue.1-2, pp.69-78, 2002.
DOI : 10.1016/S0378-5173(02)00149-7

J. A. Ronner, S. Wassink, and C. A. Smolders, Investigation of liquid-liquid demixing and aggregate formation in a membrane-forming system by means of pulse-induced critical scattering (PICS), Journal of Membrane Science, vol.42, issue.1-2, pp.27-45, 1989.
DOI : 10.1016/S0376-7388(00)82363-7

T. Sawada, M. Korenori, K. Ito, Y. Kuwahara, H. Shosenji et al., Preparation of Melamine Resin Micro/Nanocapsules by using a Microreactor and Telomeric Surfactants, Macromolecular Materials and Engineering, vol.288, issue.12, pp.920-924, 2003.
DOI : 10.1002/mame.200300220

K. Schalper, S. Harnisch, R. H. Müller, and G. E. Hildebrand, Preparation of Microparticles by Micromixers: Characterization of Oil/Water Process and Prediction of Particle Size, Pharmaceutical Research, vol.11, issue.2, pp.276-284, 2005.
DOI : 10.1007/s11095-004-1195-1

K. Schmidt, R. Ehricht, T. Ellinger, and J. S. Mccaskill, A microflow reactor with components for mixing, separation and detection for biochemical experiments, Process Miniaturization : 2 nd International Conference on Microreaction Technology, IMRET, pp.125-126, 1998.

K. Schubert, W. Bier, J. Brandner, M. Fichtner, C. Franz et al., Realization and testing of microstructure reactors, micro heat exchangers and micromixers for industrial applications in chemical engineering, Process Miniaturization : 2 nd International Conference on Microreaction Technology, pp.88-95, 1998.

E. Schuhmacher, V. Soldi, and A. T. Nunes-pires, PMMA or PEO in THF/H2O mixture: phase diagram, separation mechanism and application, Journal of Membrane Science, vol.184, issue.2, pp.187-196, 2000.
DOI : 10.1016/S0376-7388(00)00624-4

. Ch, N. Serra, M. Berton, L. Bouquey, G. Prat et al., A predictive approach of the influence of the operating parameters on the size of polymer particles synthesized in a simplified microfluidic system, Langmuir, vol.23, issue.14, pp.7745-7750, 2007.

K. M. Shakesheff, C. Evora, I. Soriano, and R. Langer, The Adsorption of Poly(vinyl alcohol) to Biodegradable Microparticles Studied by X-Ray Photoelectron Spectroscopy (XPS), Journal of Colloid and Interface Science, vol.185, issue.2, pp.538-547, 1997.
DOI : 10.1006/jcis.1996.4637

B. Poncelet-de-smet, D. Poncelet, and R. J. Neufeld, Control of mean diameter and size distribution during formulation of microcapsules with cellulose nitrate membranes, Enzyme and Microbial Technology, vol.11, issue.1, pp.29-37, 1989.
DOI : 10.1016/0141-0229(89)90110-5

K. L. Smith and S. M. Herbig, Controlled Released, pp.915-935, 1992.

G. I. Taylor, The Formation of Emulsions in Definable Fields of Flow, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.146, issue.858, p.501, 1934.
DOI : 10.1098/rspa.1934.0169

M. A. Teixeira, O. Rodríguez, V. G. Mata, and A. E. Rodrigues, The diffusion of perfume mixtures and the odor performance, Chemical Engineering Science, vol.64, issue.11, pp.2570-2589, 2009.
DOI : 10.1016/j.ces.2009.01.064

Y. Termonia, Molecular modeling of phase-inversion membranes: effect of additives in the coagulant, Journal of Membrane Science, vol.104, issue.1-2, pp.173-179, 1995.
DOI : 10.1016/0376-7388(95)00032-8

H. Tompa, Polymer solutions, Butterworths, 1956.

N. Bradi-viswanathan, P. A. Thomas, J. K. Pandit, M. G. Kulkarni, and R. A. Mashelkar, Preparation of non-porous microspheres with high entrapment efficiency of proteins by a (water-in-oil)-in-oil emulsion technique, Journal of Controlled Release, vol.58, issue.1, pp.9-20, 1999.
DOI : 10.1016/S0168-3659(98)00140-0

E. Werkmeister, Imagerie Multimodale par cartographie 3D en excitation pulsée : de la cellule au tissu, Thèse de doctorat, 2008.

I. M. Wienk, R. M. Boom, M. A. Beerlage, A. M. Bulte, C. A. Smolders et al., Recent advances in the formation of phase inversion membranes made from amorphous or semi-crystalline polymers, Journal of Membrane Science, vol.113, issue.2, pp.361-371, 1996.
DOI : 10.1016/0376-7388(95)00256-1

S. Yang and C. Washington, Drug Release from Microparticulate Systems, pp.183-212, 2006.
DOI : 10.1201/9781420027990.pt2

Y. Y. Yang, T. S. Chung, and N. P. Ng, Morphology, drug distribution, and in vitro release profiles of biodegradable polymeric microspheres containing protein fabricated by double-emulsion solvent extraction/evaporation method, Biomaterials, vol.22, issue.3, pp.231-241, 2001.
DOI : 10.1016/S0142-9612(00)00178-2

M. F. Zambaux, F. Bonneaux, R. Gref, P. Maincent, E. Dellacherie et al., Influence of experimental parameters on the characteristics of poly(lactic acid) nanoparticles prepared by a double emulsion method, Journal of Controlled Release, vol.50, issue.1-3, pp.31-40, 1998.
DOI : 10.1016/S0168-3659(97)00106-5

Y. Zhao, G. Chen, and Q. Yuan, Liquid???liquid two-phase mass transfer in the T-junction microchannels, AIChE Journal, vol.40, issue.12, pp.3042-3053, 2007.
DOI : 10.1080/01496399908951075

B. Zhou and A. C. Powell, Phase field simulations of early stage structure formation during immersion precipitation of polymeric membranes in 2D and 3D, Journal of Membrane Science, vol.268, issue.2, pp.150-164, 2005.
DOI : 10.1016/j.memsci.2005.05.030

J. M. Zielinski and J. L. Duda, Predicting polymer/solvent diffusion coefficients using free-volume theory, AIChE Journal, vol.38, issue.3, pp.405-415, 1992.
DOI : 10.1002/aic.690380309