K. L. Jonhson, Contact mechanics, 1985.

H. Hertz, Über die Berührung fester elastische Köper, J. Reine und angewandte Mathematik, pp.92-1882

D. François, A. Pineau, and A. Zaoui, Comportement mécanique des matériaux (élasticité et plasticité) ; Editions Hermès, 1991.

J. B. Pethica, R. Hutchings, and W. C. Oliver, Hardness measurement at penetration depths as small as 20 nm, Philosophical Magazine A, vol.78, issue.4, pp.593-606, 1983.
DOI : 10.1088/0370-1328/78/2/302

J. L. Loubet, J. M. Georges, O. Marchesini, and G. Meille, Vickers Indentation Curves of Magnesium Oxide (MgO), Journal of Tribology, vol.106, issue.1, pp.43-48, 1984.
DOI : 10.1115/1.3260865

W. C. Oliver-d and J. B. Pethica, Method for continuous determination of the elastic stiffness of contact between two bodies; US Patent

K. Sangwall, P. Gorostiza, F. Sanz, and J. Borc, Study of the nature and distribution of elementery steps on the (001) cleavage faces of MgO single cristals, pp.80-2325, 2000.

D. Kramer, H. Huang, M. Krisse, J. Nelson, A. Wrigt et al., Yield strength predictions from the plasticity zone around nanocontacts, Acta Mater, vol.333, p.47, 1999.

H. Hertz, on the contact of elastic solods, J Reine Angew Math, vol.92, pp.156-171, 1881.

. Translated and . English, In Hertz's miscellaneaous papers, London: Macmillan&Co, issue.5, p.1896

H. Hertz, On hardness, Verch Ver Beforderung Gewerbe Fleisses, vol.61, p.410, 1881.

. Translated and . English, In Hertz's miscellaneaous papers, London: Macmillan&Co, issue.6, p.1896

M. F. Doerner and W. D. Nix, A method for interpreting the data from depth-sensing indentation instruments, Journal of Materials Research, vol.36, issue.04, pp.601-609, 1986.
DOI : 10.1016/0020-7225(65)90019-4

W. Yu and J. Blanchard, Analytical Models for Hardness, J. Mater. Res, vol.11, issue.1, 1996.

W. C. Oliver and G. M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, Journal of Materials Research, vol.XI, issue.06, pp.1564-1583, 1992.
DOI : 10.1557/S0883769400054440

URL : https://hal.archives-ouvertes.fr/hal-01518596

W. C. Oliver and G. M. Pharr, Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology, Journal of Materials Research, vol.522, issue.01, pp.1-3, 2004.
DOI : 10.1557/JMR.1992.0618

M. Martin and M. Troyon, Fundamental relations used in nanoindentation: Critical examination based on experimental measurements, Journal of Materials Research, vol.49, issue.09, pp.2227-2234, 2002.
DOI : 10.1063/1.368196

J. Woirgard and J. C. Daegenton, An alternative method for penetration depth determination in nanoindentation measurements, Journal of Materials Research, vol.356, issue.09, pp.2455-2458, 1997.
DOI : 10.1557/JMR.1986.0601

R. B. King, Elastic analysis of some punch problems for a layered medium, International Journal of Solids and Structures, vol.23, issue.12, pp.1657-1664, 1987.
DOI : 10.1016/0020-7683(87)90116-8

J. S. Field and M. V. Swain, A simple predictive model for spherical indentation, Journal of Materials Research, vol.407, issue.02
DOI : 10.1016/0020-7225(65)90019-4

A. C. Fischer-cripps, A review of analysis methods for sub-micron indentation testing, Vacuum, vol.58, issue.4, pp.569-585, 2000.
DOI : 10.1016/S0042-207X(00)00377-8

T. Y. Tsui and G. M. Pharr, Substrate effects on nanoindentation mechanical property measurement of soft films on hard substrates, Journal of Materials Research, vol.436, issue.01, pp.292-301, 1999.
DOI : 10.1098/rspa.1993.0050

A. Bolshakov and G. M. Pharr, Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques, Journal of Materials Research, vol.356, issue.04, pp.1049-1058, 1998.
DOI : 10.1016/0022-5096(63)90035-8

Y. T. Cheng and C. M. Cheng, Relationships between hardness, elastic modulus, and the work of indentation, Applied Physics Letters, vol.73, issue.5, pp.614-616, 1998.
DOI : 10.1557/JMR.1998.0146

J. Malzbender, G. De, and . With, The P???h2 relationship in indentation, Journal of Materials Research, vol.15, issue.05, pp.1209-1212, 2000.
DOI : 10.1063/1.121873

S. J. Bull, Extracting hardness and Young's modulus from load???displacement curves, Zeitschrift f??r Metallkunde, vol.93, issue.9, pp.870-974, 2002.
DOI : 10.3139/146.020870

J. C. Hay, A. Bolshakov, and G. M. Pharr, A critical examination of the fundamental relations used in the analysis of nanoindentation data, Journal of Materials Research, vol.436, issue.06, pp.2296-2305, 1999.
DOI : 10.1063/1.120159

H. Bückle, The Science of Hardness Testing and its Applications, p.453, 1973.

R. Kouitat-njiwa and J. Stebut, Boundary element numerical analysis of elastic indentation of a sphere into a bi-layer material, International Journal of Mechanical Sciences, vol.45, issue.2, pp.317-324, 2003.
DOI : 10.1016/S0020-7403(03)00049-3

F. Cleymand, O. Ferry, R. Kouitat, A. Billard, and J. V. Stebut, Influence of indentation depth on the determination of the apparent Young's modulus of bi-layer material: Experiments and numerical simulation, Surface and Coatings Technology, vol.200, issue.1-4, pp.890-893, 2005.
DOI : 10.1016/j.surfcoat.2005.02.086

J. An and Q. Y. Zhang, Structure, morphology and nanoindentation behaviour of multilayered TiN/TaN coatings; Surface and Coating Technology, pp.2451-2458, 2005.

N. J. Carvalho, J. M. Th, and . De-hosson, Deformation mechanisms in TiN/(Ti,Al)N multilayers under depth-sensing indentation, Acta Materialia, vol.54, issue.7, pp.1857-1862, 2006.
DOI : 10.1016/j.actamat.2005.12.010

Z. H. Xie, M. Hoffman, P. Munroe, A. Bendavid, and P. J. Martin, Deformation mechanisms of TiN multilayer coatings alternated by ductile or stiff interlayers, Acta Materialia, vol.56, issue.4, pp.852-861, 2008.
DOI : 10.1016/j.actamat.2007.10.047

B. R. Lawn, Indentation of Ceramics with Spheres: A Century after Hertz, Journal of the American Ceramic Society, vol.79, issue.9, pp.1977-1994, 1998.
DOI : 10.1016/0921-5093(95)10071-7

K. V. Sampath and R. Narasimhan, A numerical anlysis of spherical indentation response of thin hard films on soft substrates, International Journal of Solids and Structures, vol.43, pp.6180-6193, 2006.

E. Weppelmam and M. V. Swain, Investigation of the stresses and stress intensity factors responsable for fracture of thin protective films during ultra-micro indentation test with spherical indenters; Thin Solids Films, pp.111-121, 1996.

R. Kouitat-njiwa, R. Consiglio, and J. V. Stebut, Boundary element modelling of coated materials in static and sliding ball???flat elastic contact, Surface and Coatings Technology, vol.102, issue.1-2, pp.148-153, 1998.
DOI : 10.1016/S0257-8972(97)00689-0

J. Knapp, D. Follstaedt, J. Barbour, and S. Myers, Finite-element modelling of nanoindentation for determining the mechanical properties of implanted layers and thin films, Nuclear Instruments and Methods in, Physics Research B, vol.127128, pp.935-939, 1997.

X. Chen and J. Vlassak, Numerical study on the measurement of thin film mechanical properties by means of nanoindentation, Journal of Materials Research, vol.39, issue.10, p.10
DOI : 10.1098/rspa.1999.0423

K. Bouzakis and N. Michailidis, Coating elastic-plastic properties determined by means of nanoindentation and FEM-supported evaluation algorithms, Thin Solid Films, pp.469-470, 2004.

J. Bressan, A. Tramontin, and C. Rosa, Modeling of nanoindentation of bulk and thin film by finite element method, Wear, vol.258, issue.1-4, pp.115-122, 2005.
DOI : 10.1016/j.wear.2004.05.021

M. Mata, O. Casals, and J. Alcala, The plastic zone size in indentation experiments: The analogy with the expansion of a spherical cavity, International Journal of Solids and Structures, vol.43, issue.20, pp.5994-6013, 2006.
DOI : 10.1016/j.ijsolstr.2005.07.002

J. Balas, J. Sladek, and V. Sladek, Stress analysis by boundary element methods, 1989.

D. Henry and P. Banerjee, A variable stiffness type boundary element formulation for axisymmetric elastoplastic media, International Journal for Numerical Methods in Engineering, vol.7, issue.5, pp.1005-1027, 1988.
DOI : 10.1002/nme.1620260502

M. Bonnet and S. Mukherjee, Implicit BEM formulations for usual and sensitivity problems in elasto-plasticity using the consistent tangent operator concept, International Journal of Solids and Structures, vol.33, issue.30, pp.4461-4480, 1996.
DOI : 10.1016/0020-7683(95)00279-0

URL : https://hal.archives-ouvertes.fr/hal-00092370

P. Christensen, A. Klarbring, J. Pang, and N. Strömberg, Formulation and comparison of algorithms for frictional contact problems, International Journal for Numerical Methods in Engineering, vol.34, issue.1, pp.145-173, 1998.
DOI : 10.1002/nme.1620340116

D. Tabor, The hardness of metals, 1951.

H. A. Francis, Phenomenological anlysis of plastic spherical indentation. Transaction of ASME journal of engineering materials and technology, pp.272-281, 1976.

Y. J. Park and G. M. Pharr, Nanoindentation with spherical indenters: finite element studies of deformation in the elastic-plastic transition regime. Thin Solids Films 447-448, pp.246-250, 2004.

C. Hardy, C. N. Baronet, and G. V. Tordion, The elasto-plastic indentation of a half-space by a rigid sphere, International Journal for Numerical Methods in Engineering, vol.89, issue.4, pp.451-462, 1971.
DOI : 10.1002/nme.1620030402

M. A. Garrido-maneiro and ;. J. Rodriguez, Pile-up effect on nanoindentation tests with spherical-conical tips, Scripta Materialia, vol.52, issue.593, p.598, 2005.

J. Rodriguez and M. A. , A procedure to prevent pile up effects on the analysis of spherical indentation data in elastic???plastic materials, Mechanics of Materials, vol.39, issue.11, pp.987-997, 2007.
DOI : 10.1016/j.mechmat.2007.04.003

M. A. Garrido-maneiro and ;. J. Rodriguez, A new consideration on spherical depth sensing indentation, Materials Letters, vol.62, issue.1, pp.69-72, 2008.
DOI : 10.1016/j.matlet.2007.04.071

T. T. Zhu, A. J. Bushby, and D. J. Dunstan, Size effect in the initiation of plasticity for ceramics in nanoindentation, Journal of the Mechanics and Physics of Solids, vol.56, issue.4, pp.1170-1185, 2008.
DOI : 10.1016/j.jmps.2007.10.003

S. Qu, Y. Huang, G. M. Pharr, and K. C. Hwang, The indentation size effect in the spherical indentation of iridium: A study via the conventional theory of mechanism-based strain gradient plasticity, International Journal of Plasticity, vol.22, issue.7, pp.1265-1286, 2006.
DOI : 10.1016/j.ijplas.2005.07.008

J. G. Swadner, E. P. George, and G. M. Pharr, The correlation of the indentation size effect measured with indenters of various shapes, Journal of the Mechanics and Physics of Solids, vol.50, issue.4, pp.681-694, 2002.
DOI : 10.1016/S0022-5096(01)00103-X

K. L. Johnson, The correlation of indentation experiments, Journal of the Mechanics and Physics of Solids, vol.18, issue.2, pp.115-126, 1970.
DOI : 10.1016/0022-5096(70)90029-3

J. G. Swadner, A. Misra, R. G. Hoagland, and M. Nastasi, A mechanistic description of combined hardening and size effects, Scripta Materialia, vol.47, issue.5, pp.343-348, 2002.
DOI : 10.1016/S1359-6462(02)00156-2

Y. Liu-2001, A. H. Liu, and . Ngan, Depth denpendence of hardness in copper single crystals measured by nanoindentation; Scripta mater, pp.237-241, 2001.

A. A. Elmustafa and D. S. Stone, Nanoindentation and the indentation size effect: Kinetics of deformation and strain gradient plasticity, Journal of the Mechanics and Physics of Solids, vol.51, issue.2, pp.357-381, 2003.
DOI : 10.1016/S0022-5096(02)00033-9

K. S. Lee, S. Wuttiphan, X. Z. Hu, S. K. Lee, and B. R. , Contact-Induced Transverse Fractures in Brittle Layers on Soft Substrates: A Study on Silicon Nitride Bilayers, Journal of the American Ceramic Society, vol.63, issue.9-10, pp.571-580, 1998.
DOI : 10.1098/rspa.1967.0137

H. Djebella and R. D. , Finite element analysis of the contact stresses in an elastic coating on an elastic substrate, International Journal of Solids and Structures, vol.29, pp.205-219, 1992.

J. Li and T. W. Chou, Elastic field of a thin-film/substrate system under an axisymmetric loading, International Journal of Solids and Structures, vol.34, issue.35-36, pp.4463-4478, 1997.
DOI : 10.1016/S0020-7683(97)00053-X

R. Kouitat-njiwa and J. Stebut, Boundary element numerical modelling as a surafce engineering tool: application to very thin coatings; Surface of coating technology, pp.116-119, 1999.

C. H. Hsueh and P. Miranda, Combined empirical???analytical method for determining contact radius and indenter displacement during Hertzian indentation on coating/substrate systems, Journal of Materials Research, vol.19, issue.09, pp.2774-2781, 2004.
DOI : 10.1016/S1359-6454(03)00290-8

P. M. Ramsey, H. W. Chandler, and T. F. Page, Modelling ythe contact response of metallic glasses, Acta Materialia, vol.52, pp.3335-3345, 1991.

M. R. Mcgurk and T. F. Page, Exploration of plate bending model for predicting the hardness reponse of coated systems; Surface of coating technology 92, pp.87-95, 1997.

A. C. Fischer-cripps, B. R. Lawn, A. Pajares, and L. Wie, Stress Analysis of Elastic-Plastic Contact Damage in Ceramic Coatings on Metal Substrates, Journal of the American Ceramic Society, vol.44, issue.2, pp.2619-2625, 1996.
DOI : 10.1111/j.1151-2916.1996.tb09023.x

K. Sriram, R. Narasimhan, and S. K. Biswas, A numerical fracture analysis of indentation into thin hard films on soft substrates; Engineering Fracture Mechnics, pp.1323-1338, 2003.

S. P. Timoshenko and S. Winowsky-kreiger, Theory of plate and shells, 1959.

R. Hill, B. Storakers, and A. B. Zdunek, A theorical study of the brinell hardness test, Proceedings of the royal Socitey of London A 423, pp.301-330, 1989.

S. Biwa and B. Storakers, An analysis of fully plastic Brinell indentation, Journal of the Mechanics and Physics of Solids, vol.43, issue.8, pp.1303-1333, 1995.
DOI : 10.1016/0022-5096(95)00031-D

S. Field and M. V. Swain, Determining the mechanical properties of small volumes of material from submicrometer spherical indentations, Journal of Materials Research, vol.423, issue.01, pp.101-112, 1995.
DOI : 10.1098/rspa.1989.0056

B. Taljat and G. M. Pharr, Development of pile-up during spherical indentation of elastic???plastic solids, International Journal of Solids and Structures, vol.41, issue.14, pp.3891-3904, 2004.
DOI : 10.1016/j.ijsolstr.2004.02.033

J. Von-stebut, F. Lapostolle, M. Busca, M. , and H. Vallen, Acoustic emission monitoring of single cracking events and associated damage mechanism analysis in indentation and scratch testing, Surface and coatings technology 116-119, pp.160-171, 1999.

S. and J. Michel, Etude du Viellissement et de la Fragilisation d'aciers inoxydables austénoferritiques ; Mises en oeuvre de l'essai de microindentation instrumentée ; thèse de doctorat en science et ingénierie des matériaux, INPL

J. Shuman-david, L. M. Costa-andré, and S. , Calculating the elastic modulus from nanoindentation and microindentation reload curves, Materials Characterization, vol.58, issue.4, pp.380-389, 2007.
DOI : 10.1016/j.matchar.2006.06.005

L. Qian, M. Li, Z. Zhou, H. Yang, and X. Shi, Comparison of nanoindentation hardness to microhardness; Surface and Coating Technology, pp.264-271, 2005.

L. Robert, N. Brunet, T. Flaherty, T. Randles, E. Matthaei-schulz et al., Characterization of TiN and carbon-doped chronium thin film coatings by acoustic microscopy; Surface and Coating Technology, pp.116-119, 1999.

C. Comte and J. Stebut, Microprobe-type measurement of Young's modulus and Poisson coefficient by means of depth sensing indentation and acoustic microscopy, Surface and Coatings Technology, vol.154, issue.1, pp.42-48, 2002.
DOI : 10.1016/S0257-8972(01)01706-6

X. Zhou, Z. Jiang, H. Wang, and R. Yu, Investigation on methods for dealing with pile-up errors in evaluating the mechanical properties of thin metal films at sub-micron scale on hard substrates by nanoindentation technique, Materials Science and Engineering: A, vol.488, issue.1-2, pp.318-332, 2008.
DOI : 10.1016/j.msea.2008.01.020

W. Jiang and J. Su, Xie-Qiao Feng; Effet of surface roughness on nanoindentation test of thin films, Engineering Fracture Mechanics, 2008.

H. Gao, Y. Huang, W. D. Nix, and J. W. Hutchinson, Mechanism-based strain gradient plasticity? I. Theory, Journal of the Mechanics and Physics of Solids, vol.47, issue.6, pp.1239-1263, 1999.
DOI : 10.1016/S0022-5096(98)00103-3

G. Feng and ;. William, Indentation size effect in MgO, Scripta Materialia, vol.51, issue.6, pp.599-603, 2004.
DOI : 10.1016/j.scriptamat.2004.05.034

A. C. Fischer-cripps, P. Karvankova, and S. Veprek, On the measurement of hardness of super-hard coatings, Surface and Coatings Technology, vol.200, issue.18-19, pp.5645-5654, 2006.
DOI : 10.1016/j.surfcoat.2005.07.096

V. Jayaram, S. Bhowmick, Z. Xie, S. Math, M. Hoffman et al., Contact deformation of TiN coatings on metallic substrates, Materials Science and Engineering: A, vol.423, issue.1-2, pp.8-13, 2006.
DOI : 10.1016/j.msea.2005.09.123

G. Wuu-ling-pan and . Yu, Jia-Hong Huang; Mechanical properties of ion-plated TiN films on AISI D2 steel; Surface and Coating Technology, pp.111-119, 1998.

G. Bolelli, V. Cannillo, L. Lusvarghi, F. P. Mantini, E. Gualtieri et al., An FIB study of sharp indentation testing on plasma-sprayed TiO2, Materials Letters, vol.62, issue.10-11, pp.1557-1560, 2008.
DOI : 10.1016/j.matlet.2007.09.022

J. Boussinesq, Application des potentiels à l'étude de l'équilibre et du mouvement des solides élastiques, 1885.

M. T. Huber, Zur Theorie der Berûhrung Fester Elestische Kôrper, Ann. der Phys, vol.14, issue.62, 1904.

W. B. Morton and L. J. Close, Notes on Hert' theory of contact problems, Philosophical Magazine, vol.43, issue.62, p.320, 1922.