M. Aboulfaraj, C. Ulrich, B. Et-dahoun, and A. , In situ observation of the plastic deformation of polypropylene spherulites under uniaxial tension and simple shear in the scanning electron microscope, Polymer, vol.36, issue.4, pp.731-742, 1995.
DOI : 10.1016/0032-3861(95)93102-R

F. Addiego, A. Dahoun, C. Et-hiver, and J. M. , Characterization of volume strain at large deformation under uniaxial tension in high-density polyethylene, Polymer, vol.47, issue.12, pp.4387-4399, 2006.
DOI : 10.1016/j.polymer.2006.03.093

E. J. Addink and J. Et-beintema, Polymorphism of crystalline polypropylene, Polymer, vol.2, pp.185-193, 1961.
DOI : 10.1016/0032-3861(61)90021-0

C. Albano, J. Papa, M. Ichazo, J. Gonzalez, and C. Et-ustariz, Application of different macrokinetic models to the isothermal crystallization of PP/talc blends, Composite Structures, vol.62, issue.3-4, pp.3-4, 2003.
DOI : 10.1016/j.compstruct.2003.09.028

E. Alexander, X-ray diffraction methods in polymer science, Journal of Materials Science, vol.6, issue.1, 1969.
DOI : 10.1007/BF00550300

E. Almeida, I. Alves, C. Brites, and L. Et-fedrizzi, Cataphoretic and autophoretic automotive primers, Progress in Organic Coatings, vol.46, issue.1, pp.8-20, 2003.
DOI : 10.1016/S0300-9440(02)00144-3

C. Angelloz, R. Fulchiron, A. Douillard, and B. Et-chabert, Crystallization of Isotactic Polypropylene under High Pressure (?? Phase), Macromolecules, vol.33, issue.11, pp.33-4138, 2000.
DOI : 10.1021/ma991813e

A. S. Argon and J. G. Et-hannoosh, Initiation of crazes in polystyrene, Philosophical Magazine, vol.7, issue.5, pp.1195-1216, 1977.
DOI : 10.1007/BF00754905

A. S. Argon and L. T. Shi, Development of visco-plastic deformation in metallic glasses, Acta Metallurgica, vol.31, issue.4, pp.499-507, 1983.
DOI : 10.1016/0001-6160(83)90038-X

J. Arranz-andrés, B. Pena, R. Benavente, E. Pérez, and M. L. Et-cerrada, Influence of isotacticity and molecular weight on the properties of metallocenic isotactic polypropylene, European Polymer Journal, vol.43, issue.6, pp.2357-2370, 2007.
DOI : 10.1016/j.eurpolymj.2007.03.034

E. M. Arruda and M. C. Et-boyce, A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials, Journal of the Mechanics and Physics of Solids, vol.41, issue.2, pp.389-412, 1993.
DOI : 10.1016/0022-5096(93)90013-6

URL : https://hal.archives-ouvertes.fr/hal-01390807

M. Arruebarrena-de-báez, P. J. Hendra, and M. Et-judkins, The Raman spectra of oriented isotactic polypropylene, Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, vol.51, issue.12, pp.2117-2124, 1995.
DOI : 10.1016/0584-8539(95)01512-1

M. F. Ashby, Y. Bréchet, and L. Et-salvo, Choix des matériaux et de leur mise en oeuvre, Presses Universitaires Romandes, 2001.

E. Assouline, R. Fulchiron, J. F. Gérard, A. Lustiger, H. D. Wagner et al., The kinetics of ?? and ?? transcrystallization in fibre-reinforced polypropylene, Polymer, vol.41, issue.21, pp.41-7843, 2000.
DOI : 10.1016/S0032-3861(00)00113-0

F. J. Baltá-calleaja and A. Et-peterlin, Plastic deformation of polypropylene. VI. mechanism and properties, Journal of Macromolecular Science, Part B, vol.4, issue.3, pp.4-7, 1970.
DOI : 10.1080/00222347008229372

F. J. Baltá-calleja, C. K. Vonk, and H. D. Jenkins, X-ray scattering of synthetic polymers, Polymer Science Library, vol.8, 1989.

A. O. Baranov and E. V. Et-prut, Ultra-high modulus isotactic polypropylene. I. The influence of orientation drawing and initial morphology on the structure and properties of oriented samples, Journal of Applied Polymer Science, vol.44, issue.9, pp.1557-1572, 1992.
DOI : 10.1002/app.1992.070440908

Z. Bartczak, A. Galeski, A. S. Argon, and R. E. Et-cohen, On the plastic deformation of the amorphous component in semicrystalline polymers, Polymer, vol.37, issue.11, pp.2113-2123, 1996.
DOI : 10.1016/0032-3861(96)85856-3

G. M. Bartenev and R. M. Et-aliguliev, Relaxation transitions in polypropylene, Polymer Science U.S.S.R., vol.26, issue.6, pp.1383-1394, 1984.
DOI : 10.1016/0032-3950(84)90050-9

D. C. Bassett and R. H. Et-olley, On the lamellar morphology of isotactic polypropylene spherulites, Polymer, vol.25, issue.7, pp.935-943, 1984.
DOI : 10.1016/0032-3861(84)90076-4

L. L. Berger, D. J. Buckley, E. J. Kramer, H. R. Brown, and R. A. Et-bubeck, Low-angle electron diffraction from high temperature polystyrene crazes, Journal of Polymer Science Part B: Polymer Physics, vol.25, issue.8, pp.1679-1697, 1987.
DOI : 10.1002/polb.1987.090250810

N. Billon, Effet de couplage thermom??canique dans la caract??risation du comportement de polym??res solidesThermal effects during mechanical characterisation of solid polymers, M??canique & Industries, vol.4, issue.4, pp.357-364, 2003.
DOI : 10.1016/S1296-2139(03)00084-8

S. Bistac, M. F. Vallat, and J. Schultz, Investigation of Chemical Interactions at the Steel/Polymer Interface by FT-IR Diffuse Reflectance Spectroscopy, Applied Spectroscopy, vol.12, issue.12, pp.1823-1825, 1997.
DOI : 10.1021/ma00210a033

M. Böhning, H. Goering, A. Fritz, K. W. Brzezinka, G. Turky et al., -maleic anhydride)/Clay Nanocomposites, Macromolecules, vol.38, issue.7, pp.2764-2774, 2005.
DOI : 10.1021/ma048315c

J. C. Bolger, Acid Base Interactions Between Oxide Surfaces and Polar Organic Compounds, Adhesion Aspects of Polymeric Coatings, KL Mittal, p.3, 1983.
DOI : 10.1007/978-1-4613-3658-7_1

S. Boni, Conception d'une machine de cisaillement plan pour la détermination du comportement plastique des matériaux polymères. Application de l'essai au polyéthylène à haute densité, Thèse d'ingénieur CNAM, 1981.

S. Boucard, Développement de formulations de polyoléfines ? silicates lamellaires : contrôle de la nanostructuration par la gestion des interfaces physico-chimiques et le procédé de mise en oeuvre dans le fondu, Thèse de doctorat de l'Institut National des Sciences Appliquées de Lyon, 2004.

R. F. Boyer, An apparent double glass transition in semicrystalline polymers, Journal of Macromolecular Science, Part B, vol.29, issue.78, pp.503-537, 1973.
DOI : 10.1016/0095-8522(63)90100-4

C. B. Bucknall, Toughened plastics, 1977.
DOI : 10.1007/978-94-017-5349-4

C. B. Bucknall and D. Et-clayton, Rubber-toughening of plastics, Journal of Materials Science, vol.302, issue.22, pp.202-210, 1972.
DOI : 10.1098/rspa.1968.0029

D. R. Burfield and P. S. Loi, The use of infrared spectroscopy for determination of polypropylene stereoregularity, Journal of Applied Polymer Science, vol.36, issue.2, pp.279-293, 1988.
DOI : 10.1002/app.1988.070360203

V. Busico and R. Et-cipullo, Microstructure of polypropylene, Progress in Polymer Science, vol.26, issue.3, pp.443-533, 2001.
DOI : 10.1016/S0079-6700(00)00046-0

V. Busico, R. Cipullo, G. Monaco, M. Vacatello, and A. L. Segre, Full assignment of the 13C NMR spectra of regioregular polypropylenes: methyl and methylene region, Macromolecules, issue.20, pp.30-6251, 1997.

M. F. Butler, A. M. Donald, and A. J. Et-ryan, Time resolved simultaneous small- and wide-angle X-ray scattering during polyethylene deformation: 1. Cold drawing of ethylene-??-olefin copolymers, Polymer, vol.38, issue.22, pp.38-5521, 1997.
DOI : 10.1016/S0032-3861(97)00111-0

F. Candia, G. Romano, and V. Vittoria, Shrinkage and retractive force of drawn isotactic polypropylene during heating, Journal of Applied Polymer Science, vol.30, issue.10, pp.4159-4173, 1985.
DOI : 10.1002/app.1985.070301017

G. Capaccio, I. M. Ward, M. A. Wilding, and G. W. Et-longman, Morphology of bulk-crystallized linear polyethylene: Study by small-angle x-ray scattering, Raman spectroscopy, and gel-permeation chromatography, Journal of Macromolecular Science, Part B, vol.15, issue.3, pp.381-407, 1978.
DOI : 10.1080/00222347808212262

S. N. Carranza, Caractérisation par spectroscopie Raman de l'endommagement dans les polymères après déformation plastique, Mémoire de Master AMASE (INPL, Nancy), 2009.

S. Castagnet, Comportement mécanique du PVDF : compétition entre cavitation et écoulement visqueux, Thèse de Doctorat de l'Université de, 1998.

S. Castagnet, J. L. Gacougnolle, and P. Dang, Correlation between macroscopical viscoelastic behaviour and micromechanisms in strained ?? polyvinylidene fluoride (PVDF), Materials Science and Engineering: A, vol.276, issue.1-2, pp.152-159, 2000.
DOI : 10.1016/S0921-5093(99)00320-2

J. M. Chalmers, H. G. Edwards, J. S. Lees, D. A. Long, M. W. Mackenzie et al., Raman spectra of polymorphs of isotactic polypropylene, Journal of Raman Spectroscopy, vol.39, issue.11, pp.613-618, 1991.
DOI : 10.1063/1.1655891

C. M. Chan, J. Wu, and Y. K. Et-cheung, Polypropylene/calcium carbonate nanocomposites, Polymer, vol.43, issue.10, pp.43-2981, 2002.
DOI : 10.1016/S0032-3861(02)00120-9

I. W. Chen and A. S. Et-argon, Diffusive growth of grain-boundary cavities, Acta Metallurgica, vol.29, issue.10, pp.1759-1768, 1981.
DOI : 10.1016/0001-6160(81)90009-2

I. W. Chen, J. Karger-kocisis, J. S. Wu, and J. Varga, Fracture toughness of ??- and ??-phase polypropylene homopolymers and random- and block-copolymers, Polymer, vol.43, issue.24, pp.6505-6514, 2002.
DOI : 10.1016/S0032-3861(02)00590-6

W. J. Choi and S. C. Kim, Effects of talc orientation and non-isothermal crystallization rate on crystal orientation of polypropylene in injection-molded polypropylene/ethylene???propylene rubber/talc blends, Polymer, vol.45, issue.7, pp.45-2393, 2004.
DOI : 10.1016/j.polymer.2004.01.058

P. Colomban and J. C. Et-badot, Frequency dependent conductivity, microwave dielectric relaxation and proton dynamics, pp.389-408, 1992.
DOI : 10.1017/CBO9780511524806.026

P. Comien, Mécanisme d'Adhésion de Polyoléfines Greffées, Thèse de Doctorat en Chimie-Physique de l'Université de Haute, 1987.

B. Crist, Plastic deformation of polymers Structure and Properties of Polymers, Materials Science and Technology, A comprehensive Treatment, vol.12, issue.10, pp.427-469, 1993.

F. Cser, About the Lorentz correction used in the interpretation of small angle X-ray scattering data of semicrystalline polymers, Journal of Applied Polymer Science, vol.39, issue.12, pp.2300-2308, 2001.
DOI : 10.1002/app.1335

D. Cullity and S. R. Et-stock, Elements of X-ray diffraction, 2001.

G. Dagli, A. S. Argon, and R. E. Et-chen, Particle size effect in craze plasticity of high-impact polystyrene, Polymer, issue.11, pp.36-2173, 1995.

A. Dahoun, Comportement plastique et textures de déformation des polymères semicristallins en traction uniaxiale et en cisaillement simple, Thèse de doctorat de l'Ecole des Mines de Nancy -INPL, Spécialité «Sciences et Génie des Matériaux», 1992.

A. Dahoun, Etude des mécanismes de déformation et d'endommagement plastique des polymères solides, Habilitation à Diriger des Recherches, INPL (Nancy), Spécialité «Sciences et Génie des Matériaux», 2004.

A. Dahoun, C. Hiver, J. M. Et-aboulfaraj, and M. , Etude structurale et mécanique de la soudure du polypropylene isotactique, Actes du Congrès National, pp.21-25, 2002.

A. Dahoun, C. Hiver, J. M. Et-addiego, and F. , Lois de comportement composantes dans la déformation plastique des polymères solides, Actes du Congrès National, pp.13-17, 2006.

A. Dandeu, B. Humbert, C. Carteret, H. Muhr, H. Plasari et al., Raman Spectroscopy ??? A Powerful Tool for the Quantitative Determination of the Composition of Polymorph Mixtures: Application to CaCO3 Polymorph Mixtures, Chemical Engineering & Technology, vol.185, issue.2, pp.221-225, 2006.
DOI : 10.1002/ceat.200500354

URL : https://hal.archives-ouvertes.fr/hal-00280847

A. Darque-ceretti and E. Felder, Adhésion et Adhérence, Collection Sciences et Techniques de l'Ingénieur, 2003.

H. Debontride and D. Et-verchère, Etude de couches de chromatation sur acier rev??tu par spectroscopies FTIR et Raman ; application aux propri??t??s d???adh??rence, Revue de M??tallurgie, vol.92, issue.5, pp.645-659, 1995.
DOI : 10.1051/metal/199592050645

R. Descartes, A Discourse on Method, 1637.

A. Deschamps, Précipitation durcissante dans les matériaux de structure, Habilitation à diriger des recherches de l'Institut National Polytechnique de Grenoble, 2009.

S. Devisme, Contribution à l'étude de l'extrusion couchage du polypropylène sur l'aluminium, Thèse de doctorat de l'Ecole des Mines de Paris, Spécialité «Sciences et Génie des Matériaux», 2006.

J. Dlugosz, G. V. Fraser, D. Grubb, A. Keller, J. A. Odell et al., Study of crystallization and isothermal thickening in polyethylene using SAXD, low frequency Raman spectroscopy and electron microscopy, Polymer, vol.17, issue.6, pp.17-451, 1976.
DOI : 10.1016/0032-3861(76)90125-7

W. Döll, Optical interference measurement and fracture mechanics analysis of crack tip craze zones Advances in polymer Science, Crazing in polymers, pp.105-168, 1983.

A. M. Donald, E. J. Kramer, and R. P. Et-kambour, Interaction of crazes with pre-existing shear bands in glassy polymers, Journal of Materials Science, vol.8, issue.2, pp.1739-1744, 1982.
DOI : 10.1007/BF00540802

H. G. Edwards, A. F. Johnson, and I. R. Lewis, Applications of Raman spectroscopy to the study of polymers and polymerization processes, Journal of Raman Spectroscopy, vol.46, issue.8, pp.475-483, 1993.
DOI : 10.1366/0003702924124141

N. J. Everall, Confocal Raman Microscopy: Why the Depth Resolution and Spatial Accuracy Can Be Much Worse Than You Think, Applied Spectroscopy, vol.54, issue.10, pp.1515-1520, 2000.
DOI : 10.1366/0003702001950382

N. J. Everall, Modeling and Measuring the Effect of Refraction on the Depth Resolution of Confocal Raman Microscopy, Applied Spectroscopy, vol.3, issue.6, pp.773-782, 2000.
DOI : 10.1366/0003702953965452

F. Fang, Q. Z. Wang, T. J. Li, and H. M. , Large tensile deformation behavior of PC/ABS alloy, Polymer, vol.47, issue.14, pp.47-5174, 2006.
DOI : 10.1016/j.polymer.2006.04.069

T. H. Ferrigno, S. Harry, V. Katz-et-jhon, and . Milewsky, Principles of filler selection and use " , Handbook of fillers for plastics, 1978.

D. R. Fitchmun and Z. Mencik, Morphology of injection-molded polypropylene, Journal of Polymer Science Part A-2: Polymer Physics, vol.11, issue.5, pp.951-971, 1973.
DOI : 10.1002/pol.1973.180110512

D. R. Fitchmun and S. Newman, Surface crystallization of polypropylene, Journal of Polymer Science Part A-2: Polymer Physics, vol.8, issue.9, pp.1545-1564, 1970.
DOI : 10.1002/pol.1970.160080909

C. Fond, G. Et, and C. Sell, Localisation des d??formations et m??canismes d'endommagements dans les polym??res multiphas??s, M??canique & Industries, vol.3, pp.431-438, 2002.
DOI : 10.1016/S1296-2139(02)01186-7

C. Fond, A. Lobbrecht, and R. Et-schirrer, Polymers toughened with rubber microspheres: an analytical solution for stresses and strains in the rubber particles at equilibrium and rupture, International Journal of Fracture, vol.249, issue.2, pp.141-159, 1996.
DOI : 10.1007/BF00037234

J. C. Foster and P. C. Et-wernett, Filler Basics for Vinyl Plastisols, Vinyl Formulators Division, 2005.

G. V. Fraser, P. J. Hendra, D. S. Watson, M. J. Gall, H. A. Willis et al., The vibrational spectrum of polypropylene, Spectrochimica Acta Part A: Molecular Spectroscopy, vol.29, issue.7, pp.29-1525, 1973.
DOI : 10.1016/0584-8539(73)80216-8

K. Friedrich, Crazes and Shear bands in semi-crystalline thermoplastics Advances in Polymer Science, Crazing in polymers, pp.225-274, 1983.

M. Fujiyama, T. Wakino, and Y. Kawasaki, Structure of skin layer in injection-molded polypropylene, Journal of Applied Polymer Science, vol.35, issue.1, pp.29-49, 1988.
DOI : 10.1002/app.1988.070350104

P. Fumagalli, L. Stixrude, S. Poli, and D. Et-snyder, The 10?? phase: a high-pressure expandable sheet silicate stable during subduction of hydrated lithosphere, Earth and Planetary Science Letters, vol.186, issue.2, pp.125-141, 2001.
DOI : 10.1016/S0012-821X(01)00238-2

C. Gabrielli, R. Jaouhari, S. Joiret, and G. Et-maurin, In situ Raman spectroscopy applied to electrochemical scaling. Determination of the structure of vaterite, Journal of Raman Spectroscopy, vol.11, issue.6, pp.497-501, 2000.
DOI : 10.3891/acta.chem.scand.45-1018

M. Gahleitner, J. Wolfschwenger, C. Bachner, K. Bernreitner, and W. Et-neißl, Crystallinity and mechanical properties of PP-homopolymers as influenced by molecular structure and nucleation, Journal of Applied Polymer Science, vol.61, issue.4, pp.649-657, 1996.
DOI : 10.1002/(SICI)1097-4628(19960725)61:4<649::AID-APP8>3.0.CO;2-L

A. Galeski, A. S. Argon, and R. E. Et-cohen, Deconvolution of x-ray diffraction data to elucidate plastic deformation mechanisms in the uniaxial extension of bulk nylon 6, Macromolecules, vol.24, issue.13, pp.3945-3952, 1991.
DOI : 10.1021/ma00013a031

F. Gaillard, Applications métallurgique de la spectroscopie infrarouge, pp.285-295, 1991.

A. Gallardo, R. Navarro, and H. Et-reinecke, Correction of diffraction effects in confocal Raman microspectroscopy, Optics Express, vol.14, issue.19, pp.8706-8715, 2006.
DOI : 10.1364/OE.14.008706

V. Gaucher-miri and R. Et-séguéla, Tensile Yield of Polyethylene and Related Copolymers:?? Mechanical and Structural Evidences of Two Thermally Activated Processes, Macromolecules, vol.30, issue.4, pp.1158-1167, 1997.
DOI : 10.1021/ma9601878

A. N. Gent and S. Et-madan, Plastic yielding of partially crystalline polymers, Journal of Polymer Science Part B: Polymer Physics, vol.27, issue.7, pp.1529-1542, 1989.
DOI : 10.1002/polb.1989.090270713

D. L. Gerrard and W. F. Et-maddams, Polymer Characterization by Raman Spectroscopy, Applied Spectroscopy Reviews, vol.3, issue.2-3, pp.251-334, 1986.
DOI : 10.1016/0379-6779(84)90068-7

O. Glatter and O. Et-kratky, Small angle X-ray scattering, 1982.

A. P. Gray, Polymer crystallinity determinations by DSC, Thermochimica Acta, vol.1, issue.6, pp.563-579, 1970.
DOI : 10.1016/0040-6031(70)80008-9

G. , C. Et-dahoun, and A. , Evolution of microstructure in semi-crystalline polymers under large plastic deformation, Materials Science and Engineering, vol.175, pp.183-199, 1994.

G. , C. Dahoun, A. Royer, F. X. Et-philippe, and M. J. , The influence of the amorphous matrix on the plastic hardening at large strain of semicrystalline polymers, Modeling Simulation Materials Science Engineering, vol.7, pp.817-828, 1999.

G. , C. Et-hiver, and J. M. , Dispositif de caractérisation optique du comportement mécanique local d'une structure pouvant présenter des déformations finies non homogènes, Brevet français déposé à l'INPI (France) le 23 avril, 2001.

G. , C. Hiver, J. M. Dahoun, A. Et-souahi, and A. , Video-controlled tensile testing of polymers and metals beyond the necking point, Journal of Materials Science, vol.27, pp.5031-5039, 1992.

G. , C. Hiver, J. M. Et-dahoun, and A. , Experimental characterization of deformation damage in solid polymers under tension and its interrelation with necking, International Journal of Solids and Strutures, vol.39, pp.3857-3872, 2002.

G. , C. Et-jonas, and J. J. , Determination of the plastic behaviour of solid polymers at constant true strain rate, Journal of Materials Science, vol.14, issue.3, pp.583-591, 1979.

C. Guinier, La Diffraction des rayons X aux très faibles angles: applications à l'étude des phénomènes ultra-microscopiques, Annales de la Physique, vol.12, pp.161-236, 1939.

D. Hansen, W. F. Kracke, and J. R. Et-falender, Note retraction of cold-drawn polyethylene and polypropylene, Journal of Macromolecular Science, Part B, vol.4, issue.3, pp.1044-1049, 1969.
DOI : 10.1080/00222347008229375

J. M. Haudin, Plastic deformation of semi-crystalline polymers Plastic deformation of amorphous and semi-crystalline materials, pp.291-311, 1982.

J. M. Haudin and C. Sell, Mécanismes microscopiques de déformation des polymères semicristallins " , Introduction à la mécanique des polymères, Edité par G'Sell C, et Haudin J.M, pp.251-273, 1995.

D. P. Harper, M. P. Laborie, and M. P. Et-wolcott, The impact of polypropylene-graft-maleic anhydride on the crystallisation and dynamic mechanical properties of isotactic polypropylene, Journal of Applied Polymer Science, vol.111, pp.753-758, 2009.

P. J. Hendra, D. J. Cutler, and R. Sang, Structure of polymers rapidly crystallized from their melts, Faraday Discussions of the Chemical Society, pp.68-320, 1979.

J. J. Hermans, P. H. Hermans, D. Vermaas, and A. Et-weidinger, Quantitative evaluation of orientation in cellulose fibres from the X-ray fibre diagram, Recueil des Travaux Chimiques des Pays-Bas, vol.88, issue.6, pp.427-447, 1946.
DOI : 10.1002/recl.19440631102

P. H. Hermans and A. Weidinger, Quantitative X???Ray Investigations on the Crystallinity of Cellulose Fibers. A Background Analysis, Journal of Applied Physics, vol.48, issue.5, pp.491-506, 1948.
DOI : 10.1002/pol.1947.120020406

H. Ramirez and J. M. , Les mécanismes de fatigue dans les fibres thermoplastiques, Thèse de doctorat de l'Ecole des Mines de Paris, Spécialité « Science et Ingénierie des Matériaux, 2004.

E. Hervé and A. Et-zaoui, inclusion-based micromechanical modelling, International Journal of Engineering Science, vol.31, issue.1, pp.1-10, 1993.
DOI : 10.1016/0020-7225(93)90059-4

M. Hoff and Z. Et-pelzbauer, Relationship between thermal shrinkage and morphology of zonedrawn polyethylene, Polymer, issue.18, pp.32-3317, 1991.

J. M. Hollas, Modern spectroscopy, pp.121-174, 1996.

I. Inrs-?-services, . Techniques, and . Médicaux, Anhydride Maléique, Fiche Toxicologique, vol.205, pp.1-4, 2004.

J. A. Jacobs and T. F. Et-kilduff, Engineering materials technology, pp.632-637, 2001.

B. Z. Jang, Rubber-toughening in polypropylene, Journal of Applied Polymer Science, vol.30, issue.6, pp.2485-2504, 1985.
DOI : 10.1002/app.1985.070300617

B. Z. Jang, D. R. Uhlmann, and J. B. Et-vander-sande, The rubber particle size dependence of crazing in polypropylene, Polymer Engineering and Science, vol.12, issue.10, pp.643-651, 1985.
DOI : 10.1021/ba-1971-0099.ch022

X. Jiang, H. Huang, Y. Zhang, and Y. Et-zhang, Dynamically cured polypropylene/epoxy blends, Journal of Applied Polymer Science, vol.38, issue.3, pp.1437-1448, 2004.
DOI : 10.5254/1.3538589

J. A. Russell, T. P. Et-yoon, and D. Y. , Synchrotron X-ray scattering studies of crystallization of poly(ether-ether-ketone) from the glass and changes during subsequent heating-cooling processes, Macromolecules, issue.25, pp.28-8491, 1995.

C. Jourdan, J. Y. Cavaillez, and J. Perez, Mechanical relaxations in polypropylene: A new experimental and theoretical approach, Journal of Polymer Science Part B: Polymer Physics, vol.27, issue.11, pp.2361-2384, 1989.
DOI : 10.1002/polb.1989.090271115

M. Kakudo and N. Et-kasai, X-ray diffraction by polymers The Netherlands, Kodansha Scientifc Books, 1972.

R. P. Kambour, A review of crazing and fracture in thermoplastics, Journal of Polymer Science: Macromolecular Reviews, vol.7, issue.1, pp.1-154, 1973.
DOI : 10.1002/pol.1973.230070101

M. R. Kantz, H. D. Newman, and F. H. Et-stigale, The skin-core morphology and structure???property relationships in injection-molded polypropylene, Journal of Applied Polymer Science, vol.16, issue.5, pp.1249-1260, 1972.
DOI : 10.1002/app.1972.070160516

J. Karger-kocsis and I. Et-csikai, Skin-Core morphology and failure of injection-molded specimens of impact-modified polypropylene blends, Polymer Engineering and Science, vol.24, issue.61, pp.241-253, 1987.
DOI : 10.1016/B978-0-12-546801-5.50013-X

J. Karger-kocsis and J. Et-varga, Effects of ?-? transformation on the static and dynamic tensile behavior of isotactic polypropylene, Journal of Applied Polymer Science, vol.62, issue.2, pp.291-300, 1996.
DOI : 10.1002/(SICI)1097-4628(19961010)62:2<291::AID-APP4>3.0.CO;2-S

H. H. Kausch, Polymer fracture, Germany), 1978.

H. H. Kausch, R. Gensler, C. Grein, C. J. Plummer, . Jr et al., Crazing in semicrystalline thermoplastics, European conference on macromolecular physics : morphology and micromechanics of polymer, pp.71-74, 1998.
DOI : 10.1007/BF02403516

H. D. Keith, F. J. Padden, . Jr, N. M. Walter, and H. W. Et-wickoff, Evidence for a Second Crystal Form of Polypropylene, Journal of Applied Physics, vol.21, issue.10, pp.1485-1488, 1959.
DOI : 10.1002/pol.1955.120189017

A. Keller and M. J. Et-machin, Oriented crystallization in polymers, Journal of Macromolecular Science, Part B, vol.1, issue.1, pp.41-91, 1967.
DOI : 10.1080/00222346708212739

A. Keller and D. P. Et-pope, Identification of structural processes in deformation of oriented polyethylene, Journal of Materials Science, vol.6, issue.6, pp.453-478, 1971.
DOI : 10.1002/polc.5070160749

V. Ken, Cataphorèse, Techniques de l'Ingénieur, traité Matériaux Métalliques, M1503, pp.1-6, 2000.

A. Khare, A. Mitra, and S. Et-radhakrishnan, Effect of CaCO 3 on the crystallization behaviour of polypropylene, Journal of Materials Science, issue.21, pp.31-5691, 1996.

M. Kim, G. H. Michler, M. Gahleitner, and R. Et-mülhaupt, Influence of morphology on the toughening mechanisms of polypropylene modified with core-shell particles derived from thermoplastic elastomers, Polymers for Advanced Technologies, vol.9, issue.10-11, pp.709-715, 1998.
DOI : 10.1002/(SICI)1099-1581(1998100)9:10/11<709::AID-PAT833>3.0.CO;2-4

M. Kim, J. Noh, and H. Et-chung, Comparison of near-infrared and Raman spectroscopy for the determination of the density of polyethylene pellets, Analytica Chimica Acta, vol.632, issue.1, pp.122-127, 2009.
DOI : 10.1016/j.aca.2008.10.057

J. L. Koenig, Raman Scattering of Synthetic Polymers???A Review, Applied Spectroscopy Reviews, vol.7, issue.2, pp.233-305, 1971.
DOI : 10.1246/bcsj.41.1798

E. J. Kramer, Microscopic and molecular fundamentals of crazing Advances in Polymer Science, Crazing in polymers, pp.1-56, 1983.

E. J. Kramer and L. L. Berger, Craze growth and fracture Advances in Polymer Science, Crazing in polymers, pp.1-68, 1990.

O. Kratky, Possibilities of X-ray small angle analysis in the investigation of dissolved and solid high polymer substances, Pure and Applied Chemistry, vol.2, issue.217, pp.483-524, 1966.
DOI : 10.1351/pac196612010483

L. Labour, A. Gauthier, C. Séguela, R. Vigier, G. Bomal et al., Influence of the ?? crystalline phase on the mechanical properties of unfilled and CaCO 3 -filled polypropylene. I. Structural and mechanical characterisation, Polymer, vol.42, issue.16, pp.7127-7135, 2001.
DOI : 10.1016/S0032-3861(01)00089-1

URL : https://hal.archives-ouvertes.fr/hal-00475294

A. Lazzeri and C. B. Et-bucknall, Dilatational bands in rubber-toughened polymers, Journal of Materials Science, vol.30, issue.3, pp.1573-4803, 1993.
DOI : 10.1007/BF00356433

Y. W. Leong, A. Bakar, M. B. Mohd, Z. A. Ishak, A. Ariffin et al., Comparison of the mechanical properties and interfacial interactions between talc, kaolin, and calcium carbonate filled polypropylene composites, Journal of Applied Polymer Science, vol.36, issue.5, pp.3315-3326, 2004.
DOI : 10.1016/0032-3861(95)93590-I

Y. W. Leong, . Mohd, Z. A. Ishak, and A. Et-ariffin, Mechanical and thermal properties of talc and calcium carbonate filled polypropylene hybrid composites, Journal of Applied Polymer Science, vol.53, issue.5, pp.3327-3336, 2004.
DOI : 10.1016/0266-3538(94)00070-0

Y. W. Leong, A. Bakar, M. B. Mohd, Z. A. Ishak, and A. Et-ariffin, Effects of filler treatments on the mechanical, flow, thermal, and morphological properties of talc and calcium carbonate filled polypropylene hybrid composites, Journal of Applied Polymer Science, vol.43, issue.1, pp.413-426, 2005.
DOI : 10.1007/978-1-4684-6069-8

J. C. Leroux, Cataphorèse, pp.1-7, 1989.

J. X. Li and W. L. Et-cheung, On the deformation mechanisms of ?-PP: I: Effect of necking on ?- PP crystals, Polymer, issue.26, pp.39-6935, 1998.

J. Z. Liang, C. Y. Tang, . Tang, and H. C. Man, Flow and mechanical properties of polypropylene/low density polyethylene blends, Journal of Materials Processing Technology, vol.66, issue.1-3, pp.158-164, 1997.
DOI : 10.1016/S0924-0136(96)02511-3

L. Lin and A. S. Et-argon, Structure and plastic deformation of polyethylene, Journal of Materials Science, vol.43, issue.7, pp.294-323, 1994.
DOI : 10.1098/rspa.1968.0029

T. Liu and I. R. Et-harrison, Effect of draw rate on the stress-strain behaviour of polymers, Polymer, vol.29, issue.2, pp.233-240, 1988.
DOI : 10.1016/0032-3861(88)90327-8

D. Lohse, The melt compatibility of blends of polypropylene and ethylene-propylene copolymers, Polymer Engineering and Science, vol.10, issue.21, pp.1500-1509, 1986.
DOI : 10.1021/ba-1984-0206.ch010

B. Lotz, S. Kopp, and D. Et-dorset, Sur une structure cristalline originale de polymères en conformation hélicoïdale 3 1 ou 3 2 = An original crystal structure of polymers with ternary helices, Comptes rendus de l'Académie des sciences. Série II, Mécanique, physique, chimie, astronomie, pp.319-187, 1994.

B. Lotz and J. C. Et-wittmann, Epitaxy of helical polyolefins : polymer blends and polymer nucleating agent systems, Die Makromolekulare Chemie, vol.185, issue.9, pp.2043-2052, 1984.
DOI : 10.1002/macp.1984.021850924

B. Lotz, J. C. Et-wittmann, B. Lotz, J. C. Wittmann, and A. J. Et-lovinger, The molecular origin of lamellar branching in the ? (monoclinic) form of isotactic polypropylene Structure and morphology of poly(propylenes) : a molecular analysis, Journal of Polymer Science, Part B: Polymer Physics Polymer, issue.22, pp.37-4979, 1996.

H. Mae, M. Omiya, and K. Et-kishimoto, Microstructural Observation and Simulation of Micro Damage Evolution of Ternary Polypropylene Blend with Ethylene-Propylene-Rubber (EPR) and Talc, Journal of Solid Mechanics and Materials Engineering, vol.2, issue.8, pp.1018-1036, 2008.
DOI : 10.1299/jmmp.2.1018

J. Martin, Etude par spectroscopie Raman du polypropylène isotactique au cours de sa deformation uniaxiale, Thèse de doctorat de l, 2009.

E. Martuscelli, C. Silvestre, and L. Et-bianchi, Properties of thin films of isotactic polypropylene blended with polyisobutylene and ethylene-propylene-diene terpolymer rubbers, Polymer, vol.24, issue.11, pp.24-1458, 1983.
DOI : 10.1016/0032-3861(83)90231-8

Y. Maruhashi, Structure and physical properties of biaxially stretched polyethylene terephthalate sheets under different heat-set and stretch conditions, Polymer Engineering & Science, vol.15, issue.12, pp.2194-2199, 2001.
DOI : 10.1002/polc.5070150118

H. Mavridis, A. N. Hrymak, and J. Et-vlachopoulos, The Effect of Fountain Flow on Molecular Orientation in Injection Molding, Journal of Rheology, vol.32, issue.6, pp.639-663, 1988.
DOI : 10.1122/1.549984

N. G. Mccrum, B. E. Read, and G. Williams, Anelastic and dielectric effects in polymer solids, 1991.

S. V. Meille, D. R. Ferro, S. Bruckner, A. J. Lovinger, and F. Et-padden, Structure of .beta.-Isotactic Polypropylene: A Long-Standing Structural Puzzle, Macromolecules, vol.27, issue.9, pp.27-2615, 1994.
DOI : 10.1021/ma00087a034

URL : https://hal.archives-ouvertes.fr/hal-01378757

C. Merlin, Approches analytique et électrochimique de la dégradation des tôles d'acier revêtues cataphorésées en atmosphères corrosives contenant des ions sulfates, Thèse de Doctorat de l'Université Henri Poincaré (Nancy 1), Spécialité : Physique et Chimie de la Matière et des Matériaux, 1999.

K. Mezghani and P. J. Et-phillips, The ??-phase of high molecular weight isotactic polypropylene. II: The morphology of the ??-form crystallized at 200 MPa, Polymer, vol.38, issue.23, pp.38-5725, 1997.
DOI : 10.1016/S0032-3861(97)00131-6

K. Mezghani and P. J. Et-phillips, ??-Phase in propylene copolymers at atmospheric pressure, Polymer, vol.36, issue.12, pp.36-2407, 1995.
DOI : 10.1016/0032-3861(95)97341-C

S. Michielsen, Aberrations in confocal spectroscopy of polymeric materials: Erroneous thicknesses and intensities, and loss of resolution, Journal of Applied Polymer Science, vol.48, issue.7, pp.1662-1669, 2001.
DOI : 10.1002/app.1597

Y. Minoura, M. Ueda, and S. Et-mizunuma, The reaction of polypropylene with maleic anhydride, Journal of Applied Polymer Science, vol.13, issue.8, pp.1625-1640, 1969.
DOI : 10.1002/app.1969.070130805

B. Monasse and J. M. Et-haudin, Growth transition and morphology change in polypropylene, Colloid & Polymer Science, vol.44, issue.10, pp.822-831, 1985.
DOI : 10.1007/BF01412960

L. Mullins and N. R. Et-tobin, Theoretical model for the elastic behaviour of filler-reinforced vulcanized rubbers, Rubber Chemical Technology, vol.30, pp.551-571, 1957.

. Multibase, Structural Plastics: Multipro ® and Multibatch ® reinforced with ?-Talc, Présentation technico-commerciale chez ArcelorMittal Montataire, 2006.

N. B. Et-lv and R. , Effect of cavitation on the plastic deformation and failure of isotactic polypropylene, Journal of Applied Polymer Science, vol.105, issue.6, pp.3274-3279, 2007.

M. Naiki, Y. Fukui, T. Matsumura, T. Nomura, and M. Et-matsuda, The effect of talc on the crystallization of isotactic polypropylene, Journal of Applied Polymer Science, vol.38, issue.9, pp.1693-1703, 2001.
DOI : 10.1016/S0032-3861(97)00071-2

S. I. Naqui and I. M. Et-robinson, Tensile dilatometric studies of deformation in polymeric materials and their composites, Journal of Materials Science, vol.20, issue.6, pp.1421-1429, 1993.
DOI : 10.1179/095066061790425893

I. Narisawa and M. Et-ishikawa, Crazing in semi-crystalline thermoplastics, Advances in Polymer Science, vol.9192, pp.353-391, 1990.

G. Natta and P. Et-corradini, Structure and properties of isotactic polypropylene, Il Nuovo Cimento, vol.7, issue.8, pp.40-51, 1960.
DOI : 10.1007/BF02731859

K. H. Nitta and M. Takayanagi, Role of tie molecules in the yielding deformation of isotactic polypropylene, Journal of Polymer Science Part B: Polymer Physics, vol.60, issue.4, pp.357-368, 1999.
DOI : 10.1002/pol.1968.110060802

K. H. Nitta and M. Takayanagi, Tensile yield of isotactic polypropylene in terms of a lamellar-cluster model, Journal of Polymer Science Part B: Polymer Physics, vol.33, issue.8, pp.1037-1044, 2000.
DOI : 10.1023/A:1004351209140

K. H. Nitta and M. Et-yamaguchi, Morphology and Mechanical Properties in Blends of Polypropylene and Polyolefin-Based Copolymers, Polyolefin Blends, édité par Domasius Nwabunma et Thein Kyu, pp.224-268, 2008.
DOI : 10.1002/9780470199008.ch9

A. S. Nielsen, D. N. Batchelder, and R. Et-pyrz, Estimation of crystallinity of isotactic polypropylene using Raman spectroscopy, Polymer, vol.43, issue.9, pp.2671-2676, 2002.
DOI : 10.1016/S0032-3861(02)00053-8

T. Nomura, T. Nishio, M. Nakagawa, T. Sumitomo, and S. Suzuki, Impact Strength and Morphology of Blends of Polypropylene with Ethylene-Propylene Rubber., KOBUNSHI RONBUNSHU, vol.51, issue.9, pp.577-585, 1975.
DOI : 10.1295/koron.51.577

D. R. Norton and A. Et-keller, The spherulitic and lamellar morphology of melt-crystallized isotactic polypropylene, Polymer, vol.26, issue.5, pp.704-716, 1985.
DOI : 10.1016/0032-3861(85)90108-9

Y. Obata, T. Sumitomo, and T. Et-ijitsu, The effect of talc on the crystal orientation in polypropylene/ethylene-propylene rubber/talc polymer blends in injection molding, Polymer Engineering & Science, vol.42, issue.3, pp.408-416, 2001.
DOI : 10.1295/koron.51.505

R. H. Olley and D. C. Et-bassett, On the development of polypropylene spherulites, Polymer, vol.30, issue.3, pp.399-409, 1989.
DOI : 10.1016/0032-3861(89)90004-9

R. H. Olley and D. C. Basset, An improved permanganic etchant for polyolefines, Polymer, vol.23, issue.12, pp.1707-1710, 1982.
DOI : 10.1016/0032-3861(82)90110-0

R. H. Olley, A. M. Hodge, and D. C. Basset, A permenganic etchant for polyolefines, Journal of Polymer Science, vol.17, pp.627-643, 1979.

P. Pennings, A. J. Van-der-mark, J. M. Et-booji, and H. C. , Hydrodynamically induced crystallization of polymers from solution, Kolloid-Zeitschrift & Zeitschrift f??r Polymere, vol.8, issue.3, p.99, 1970.
DOI : 10.5254/1.3539562

A. Peterlin, Molecular model of drawing polyethylene and polypropylene, Journal of Materials Science, vol.5, issue.197, pp.490-508, 1971.
DOI : 10.1177/004051756303301005

A. Peterlin and G. Et-meinel, Small-angle X-ray diffraction studies of plastically deformed polyethylene, Die Makromolekulare Chemie, vol.142, issue.1, pp.227-240, 1971.
DOI : 10.1002/macp.1971.021420119

A. Peterlin, Drawing and extrusion of semi-crystalline polymers, Colloid & Polymer Science, vol.20, issue.3, pp.357-382, 1987.
DOI : 10.1007/978-94-010-9803-8_9

J. Petermann, A. Karbach, and K. Et-feit, Ultradrawing of spring polypropylene films, Polymer Bulletin, vol.18, pp.355-360, 1987.

J. Petermann and J. M. Et-schultz, Lamellar separation during the deformation of high-density polyethylene, Journal of Materials Science, vol.31, issue.1, pp.50-54, 1978.
DOI : 10.1007/BF00739272

W. L. Peticolas, G. W. Hibler, J. L. Lippert, A. Peterlin, and H. Et-olf, RAMAN SCATTERING FROM LONGITUDINAL ACOUSTICAL VIBRATIONS OF SINGLE CRYSTALS OF POLYETHYLENE, Applied Physics Letters, vol.49, issue.3, pp.87-89, 1971.
DOI : 10.1002/bip.1970.360090402

Z. S. Petrovi?, J. Budinski-simendi?, V. Divjakovi?, and Z. Et-?krbi?, Effect of addition of polyethylene on properties of polypropylene/ethylene-propylene rubber blends, Journal of Applied Polymer Science, vol.59, issue.2, pp.301-310, 1996.
DOI : 10.1002/(SICI)1097-4628(19960110)59:2<301::AID-APP15>3.0.CO;2-Z

N. Phillips, Corrosion sous peinture de tôles d'acier électrozinguées : indentification des produits de corrosion du zinc par spectroscopie Raman et caractérisation du comportement électrochimique par la méthode d'impédance, Thèse de Doctorat de l, p.Métallurgie, 1993.

J. C. Philips, Kohlrausch relaxation and glass transitions in experiment and in molecular dynamics simulations, Journal of Non-Crystalline Solids, vol.182, issue.1-2, pp.155-161, 1995.
DOI : 10.1016/0022-3093(94)00535-4

C. J. Plummer, . Jr, and H. H. Et-kausch, Deformation and entanglement in semicrystalline polymers, Journal of Macromolecular Science, Part B, vol.35, issue.3, pp.637-657, 1996.
DOI : 10.1080/00222349608220400

M. Ponçot, Caracterización térmica y mecánica del EVOH puro procesado por extrusión, 2006.

M. Ponçot, A. Dahoun, J. Hiver, O. Godard, D. Verchère et al., Comportements thermomécaniques du polypropylène isotactique en traction uniaxiale et traction plane, DEformation des POlymères Solides, Congrès National, 2009.

M. Ponçot, A. Dahoun, J. Hiver, O. Godard, D. Verchère et al., Thermomecanical behaviour of metal/polymer composites along different deformation paths: Determination of intrinsic mechanical behaviour laws on thin polymer film geometry " , Deformation Yield and Fracture of Polymers, Congrès International, pp.5-9, 2009.

G. Porod, Die R??ntgenkleinwinkelstreuung von dichtgepackten kolloiden Systemen, Kolloid-Zeitschrift, vol.69, issue.Nr. 3, pp.83-114, 1951.
DOI : 10.1098/rspa.1935.0121

URL : https://link.springer.com/content/pdf/10.1007%2FBF01513908.pdf

D. Prevorsek and A. V. Et-tobolsky, Determination of Non-Flow Shrinkage Ratio in Oriented Fibers, Textile Research Journal, vol.33, issue.10, pp.795-802, 1963.
DOI : 10.1063/1.1733226

B. Pukanszky, M. Van-es, F. H. Mauer, and G. Et-voros, Micromechanical deformations in particulate filled thermoplastics: volume strain measurements, Journal of Materials Science, vol.9, issue.9, pp.2350-2358, 1994.
DOI : 10.1007/BF00363426

H. J. Qi and M. C. Et-boyce, Constitutive model for stretch-induced softening of the stress?stretch behavior of elastomeric materials, Journal of the Mechanics and Physics of Solids, vol.52, issue.10, pp.2187-2205, 2004.
DOI : 10.1016/j.jmps.2004.04.008

H. Quan, Z. M. Li, M. B. Yang, and R. Huang, Review: On transcrystallinity in semi-crystalline polymer composites, Composites Science and Technology, vol.65, pp.7-8, 2005.

J. Rault, Les polymers solides, Edition CEPADUES, 2002.

B. E. Read, Mechanical relaxation in isotactic polypropylene, Polymer, vol.30, issue.8, pp.30-1439, 1989.
DOI : 10.1016/0032-3861(89)90213-9

M. L. Quintanilla, Comparative characterization of PP nano-and micro-composites by inmold shrinkage measurements and structural characteristics, Macromolecular Materials and Engineering, vol.292, issue.6, pp.762-768, 2007.

E. Riande, R. Diaz-calleja, M. Prolongo, R. Masegosa, and C. Salom, Polymer viscoelasticity: stress and strain in practice, pp.29-83, 1999.

I. Ribeiro, P. Peças, A. Silva, and E. Et-enriques, Life cycle engineering methodology applied to material selection, a fender case study, Journal of Cleaner Production, vol.16, issue.17, pp.1887-1899, 2008.
DOI : 10.1016/j.jclepro.2008.01.002

L. Robert, B. Vergnes, and Y. Et-demay, Etude expérimentale du défaut oscillant d'un polyéthylène haute densité par vélocimétrie laser et biréfringence d'écoulement, XVème Congrès Français de Mécanique, p.625, 2001.

J. Runt and I. R. Et-harrisson, 9. Thermal Analysis of Polymers, Polymer Crystal Structure and Morphology, 1980.
DOI : 10.1016/S0076-695X(08)60760-7

T. P. Russel and J. T. Et-koberstein, Simultaneous differential scanning calorimetry and small-angle x-ray scattering, Journal of Polymer Science: Polymer Physics Edition, vol.23, issue.6, pp.1109-1115, 1985.
DOI : 10.1002/pol.1985.180230603

F. Rybnikar, Orientational memory in filled isotactic polypropylene, European Polymer Journal, vol.27, issue.6, pp.549-551, 1991.
DOI : 10.1016/0014-3057(91)90181-M

O. O. Santana, M. Ponçot, A. Gordillo, J. Gámez-pérez, M. Maspoch et al., Efecto de la historia termomecánica sobre el comportamiento a fractura de un copolímero EVOH, Anales de Mecánica de la Fractura, pp.491-496, 2006.

R. Séguéla, E. Staniek, B. Escaig, and B. Et-fillon, Plastic deformation of polypropylene in relation to crystalline structure, Journal of Applied Polymer Science, vol.26, issue.61, pp.71-1873, 1999.
DOI : 10.1016/0032-3861(85)90240-X

R. Séguéla, On the Natural Draw Ratio of Semi-Crystalline Polymers: Review of the Mechanical, Physical and Molecular Aspects, Macromolecular Materials and Engineering, vol.22, issue.3, pp.235-244, 2007.
DOI : 10.1002/pol.1984.180220310

L. Scodellaro, Endommagement par cavitation du polypropylène renforcé choc par des particules d'élastomère, Thèse de l, 2001.

R. Schirrer, Les craquelures dans les polymères Introduction à la mécanique des polymères, pp.395-411, 1995.

R. Schirrer and C. Et-fond, Quelques aspects de la rupture des polym??res : craquelures, microcisaillements et renforcement aux chocs, La revue de Métallurgie ? CIT/Science et génie des matériaux, pp.1027-1042, 1995.
DOI : 10.1051/metal/199592091027

K. Schmidt-rohr and H. W. Et-spiess, Chain diffusion between crystalline and amorphous regions in polyethylene detected by 2D exchange 13C NMR, Macromolecules, issue.19, pp.24-5288, 1991.

B. Schneider, O. D. Hennemann, and W. Et-possart, The Adhesion of Maleic Anhydride on Native Aluminum Oxide: An Approach by Infrared Spectroscopy and Quantum Mechanical Modeling, The Journal of Adhesion, vol.20, issue.9, pp.779-797, 2002.
DOI : 10.1063/1.462165

J. M. Schultz, Polymer materials science, Printice-Hall, 1974.

J. M. Schultz, J. S. Lin, and R. W. Hendricks, A dynamic study of the crystallization of polyethylene from the melt, Journal of Applied Crystallography, vol.11, issue.5, pp.551-557, 1978.
DOI : 10.1107/S0021889878013862

Y. Seo, J. Kim, K. U. Kim, and Y. C. Kim, Study of the crystallization behaviors of polypropylene and maleic anhydride grafted polypropylene, Polymer, vol.41, issue.7, pp.2639-2646, 2000.
DOI : 10.1016/S0032-3861(99)00425-5

M. Smole and P. Et-zipper, The influence of different treatment media on the structure of PET fibres, Materials Research Innovations, vol.6, issue.2, pp.55-64, 2002.
DOI : 10.1007/s10019-002-0173-7

K. Shelesh-nezhad and A. Et-taghizadeh, Shrinkage behavior and mechanical performances of injection molded polypropylene/talc composites, Polymer Engineering & Science, vol.88, issue.12, pp.2124-2128, 2007.
DOI : 10.1002/pen.20940

W. M. Speri and G. R. Patrick, Fiber reinforced rubber modified polypropylene, Polymer Engineering and Science, vol.1, issue.9, pp.668-672, 1975.
DOI : 10.1002/polc.5070010107

F. C. Stehling, T. Huff, C. S. Speed, and G. Wissler, Structure and properties of rubber-modified polypropylene impact blends, Journal of Applied Polymer Science, vol.26, issue.8, pp.2693-2711, 1981.
DOI : 10.1002/app.1981.070260818

F. C. Stehling and J. R. Knox, Stereochemical Configuration of Polypropylene by Hydrogen Nuclear Magnetic Resonance, Macromolecules, vol.8, issue.5, pp.595-603, 1975.
DOI : 10.1021/ma60047a006

R. S. Stein, The X-ray diffraction, birefringence, and infrared dichroism of stretched polyethylene. II. Generalized uniaxial crystal orientation, Journal of Polymer Science, vol.31, issue.123, pp.327-334, 1958.
DOI : 10.1002/pol.1958.1203112309

A. Stralin and T. Hjertberg, Adhesion between LDPE and hydrated aluminium in extrusion-coated laminates, Journal of Adhesion Science and Technology, vol.7, issue.11, pp.1211-1229, 1993.
DOI : 10.1163/156856193X00060

C. H. Suh and J. L. White, Talc-thermoplastic compounds: particle orientation in flow and rheological properties, Journal of Non-Newtonian Fluid Mechanics, vol.62, issue.2-3, pp.175-206, 1996.
DOI : 10.1016/0377-0257(95)01382-2

M. Sumita, Y. Tsukumo, K. Miyasaka, and K. Ishikawa, Tensile yield stress of polypropylene composites filled with ultrafine particles, Journal of Materials Science, vol.221, issue.6, pp.1758-1764, 1983.
DOI : 10.1007/BF00542072

C. Szumilo, Etude par spectroscopie vibrationnelle de l'interaction de molécules organiques (époxydes, anhydrides, acides) avec des substrats de zinc polycristallins, Thèse de Doctorat de l'Université Pierre et Marie Curie Spécialité : Spectrochimie, Analyses Biologiques et Organiques, 1994.

H. Tadokoro, M. Kobayashi, M. Ukita, K. Yasufuku, and S. Et-murahashi, Normal Vibrations of the Polymer Molecules of Helical Conformation. V. Isotactic Polypropylene and Its Deuteroderivatives, The Journal of Chemical Physics, vol.42, issue.4, pp.1432-1449, 1965.
DOI : 10.1002/macp.1962.020550111

M. Tanaka and R. J. Et-young, Molecular Orientation Distributions in the Crystalline and Amorphous Regions of Uniaxially Oriented Isotactic Polypropylene Films Determined by Polarized Raman Spectroscopy, Journal of Macromolecular Science, Part B: Physics, vol.40, issue.6, pp.967-991, 2005.
DOI : 10.1080/00222340500323599

H. I. Tang, A. Hiltner, and E. Et-baer, Biaxial orientation of polypropylene by hydrostatic solid state extrusion. Part III: Mechanical properties and deformation mechanisms, Polymer Engineering and Science, vol.9, issue.12, pp.876-886, 1987.
DOI : 10.1002/pen.760271203

S. Thery, D. Jacquet, and M. Mantel, A Study of Chemical Interactions at the Stainless Steel/Polymer Interface by Infrared Spectroscopy. Part 1: Interaction Mechanisms Between Succinic Anhydride and 304 Stainless Steel, The Journal of Adhesion, vol.2, issue.1-4, pp.1-4, 1996.
DOI : 10.1063/1.438317

M. G. Tijssen, E. Van-der-giessen, and L. J. Sluysa, Simulation of mode I crack growth in polymers by crazing, International Journal of Solids and Structures, vol.37, issue.48-50, pp.7307-7327, 2000.
DOI : 10.1016/S0020-7683(00)00200-6

S. Toki, I. Sics, C. Burger, D. Fang, L. Liu et al., Structure Evolution during Cyclic Deformation of an Elastic Propylene-Based Ethylene???Propylene Copolymer, Macromolecules, vol.39, issue.10, pp.39-3588, 2006.
DOI : 10.1021/ma0600106

J. Tunnicliffe, D. J. Blundell, and A. H. Et-windle, Retraction of polypropylene tape, Polymer, vol.21, issue.11, pp.1259-1268, 1980.
DOI : 10.1016/0032-3861(80)90190-1

A. Turner-jones and A. J. Cobbold, The ?? crystalline form of isotactic polypropylene, Journal of Polymer Science Part B: Polymer Letters, vol.6, issue.8, pp.539-546, 1968.
DOI : 10.1002/pol.1968.110060802

V. Van-den-brand and J. , On the Adhesion between Aluminium and Polymers, 2004.

A. Van-der-wal and R. J. Gaymans, Polypropylene???rubber blends: 5. Deformation mechanism during fracture, Polymer, vol.40, issue.22, pp.6067-6075, 1999.
DOI : 10.1016/S0032-3861(99)00216-5

A. J. Vries, Structure and properties of uni- and biaxially oriented polypropylene films: Part 2 - Mechanical and other end-use properties, Pure and Applied Chemistry, vol.54, issue.3, pp.647-670, 1982.
DOI : 10.1351/pac198254030647

Y. Wada and Y. Et-hotta, Glass transition and relaxation in the amorphous phase of isotactic polypropylene, Journal of Polymer Science Part C: Polymer Symposia, vol.62, issue.2, pp.583-595, 1968.
DOI : 10.6028/jres.068A.002

C. A. Wah, L. Y. Choong, and G. S. Et-neon, Effects of titanate coupling agent on rheological behaviour, dispersion characteristics and mechanical properties of talc filled polypropylene, European Polymer Journal, vol.36, issue.4, pp.789-801, 2000.
DOI : 10.1016/S0014-3057(99)00123-8

S. Wu, Phase structure and adhesion in polymer blends: A criterion for rubber toughening, Polymer, vol.26, issue.12, pp.1855-1863, 1985.
DOI : 10.1016/0032-3861(85)90015-1

B. Wunderlich, Macromolecular Physics, Volume 1: Crystal structure, morphology, defects, 1973.

B. Wunderlich, Macromolecular Physics Crystal nucleation, growth, annealing, 1976.

B. Wunderlich, Macromolecular Physics, Volume 3: Crystal melting, 1980.

W. Xu, D. C. Martin, and E. M. Et-arruda, Finite strain response, microstructural evolution and ??????? phase transformation of crystalline isotactic polypropylene, Polymer, vol.46, issue.2, pp.455-470, 2005.
DOI : 10.1016/j.polymer.2004.10.084

Y. S. Yadav and P. C. Et-jain, Melting behaviour of oriented isotactic polypropylene, Thermochimica Acta, vol.117, pp.97-103, 1987.
DOI : 10.1016/0040-6031(87)88105-4

M. Yamaguchi, M. Miyata, and K. Et-nitta, Structure and properties for binary blends of isotactic-polypropylene with ethylene-?-olefin copolymer. 1. Crystallization and morphology, Journal of Polymer Science Part B: Polymer Physics, vol.35, issue.6, pp.953-961, 1997.
DOI : 10.1002/(SICI)1099-0488(19970430)35:6<953::AID-POLB10>3.0.CO;2-E

H. Yang and . Wu-hsiang, Impact polypropylene composition having high impact resistance and stiffness, World Intellectual Property Organization, 1998.

A. C. Yang and E. J. Kramer, Craze microstructure characterization by low-angle electron diffraction and Fourier transforms of craze images, Journal of Materials Science, vol.7, issue.53, pp.3601-3610, 1986.
DOI : 10.1080/01418617908239285

M. A. Yerina, M. I. Knunyants, A. O. Baranov, E. V. Prut, and N. S. Et-yenkolopyan, Aspects of the melting of highly oriented polypropylene, Polymer Science U.S.S.R., vol.29, issue.3, pp.565-570, 1987.
DOI : 10.1016/0032-3950(87)90263-2

R. J. Young, P. B. Bowden, J. M. Ritchie, and J. G. Et-rider, Deformation mechanisms in oriented high-density polyethylene, Journal of Materials Science, vol.39, issue.1, pp.23-26, 1973.
DOI : 10.1007/BF00755579

S. M. Zebarjad, R. Bagheri, A. Lazzeri, and S. Et-serajzadeh, Dilatational shear bands in rubber-modified isotactic polypropylene, Materials & Design, vol.25, issue.3, pp.247-250, 2004.
DOI : 10.1016/j.matdes.2003.10.001

H. Zhou and G. L. Et-wilkes, Comparison of lamellar thickness and its distribution determined from d.s.c., SAXS, TEM and AFM for high-density polyethylene films having a stacked lamellar morphology, Polymer, vol.38, issue.23, pp.5735-5747, 1997.
DOI : 10.1016/S0032-3861(97)00145-6

F. Zuo, J. K. Keum, X. Chen, B. S. Hsiao, H. Chen et al., The role of interlamellar chain entanglement in deformation-induced structure changes during uniaxial stretching of isotactic polypropylene, Polymer, vol.48, issue.23, pp.6867-6880, 2007.
DOI : 10.1016/j.polymer.2007.08.065