]. A. Abe-02, Abed,¨ Contribution à l'étude et au diagnostic de la machine asynchrone¨, Thèse de doctorat, 2002.

H. A. Orguner, M. Toliyat, and . Rayner, Low Order PWM Inverter Harmonics Contributions to the Inverter-Fed Induction Machine Fault Diagnosis, Industrial Electronics IEEE Transactions on, vol.55, issue.2, pp.610-619, 2008.

R. N. Andriamalala, H. Razik, L. Baghli, and F. Sargos, Eccentricity Fault Diagnosis of a Dual-Stator Winding Induction Machine Drive Considering the Slotting Effects, IEEE Transactions on Industrial Electronics, vol.55, issue.12, pp.4238-4251, 2008.
DOI : 10.1109/TIE.2008.2004664

URL : https://hal.archives-ouvertes.fr/hal-00440401

M. Arkan, D. Kostic-perovic, and P. J. Nsworth, Modelling and simulation of induction motors with inter-turn faults for diagnostics, Electric Power Systems Research, vol.75, issue.1, pp.57-66, 2005.
DOI : 10.1016/j.epsr.2004.08.015

M. Aydin, Z. Q. Zhu, T. A. Lipo, and D. Howe, Minimization of Cogging Torque in Axial-Flux Permanent-Magnet Machines: Design Concepts, IEEE Transactions on Magnetics, vol.43, issue.9, 2007.
DOI : 10.1109/TMAG.2007.902818

S. Bachir, J. Tnani, G. Trigeassou, and . Champenois, Diagnosis by parameter estimation of stator and rotor faults occurring in induction machines, IEEE Transactions on Industrial Electronics, vol.53, issue.3, pp.963-973, 2006.
DOI : 10.1109/TIE.2006.874258

]. L. Baghli, L. Hein, H. Razik, and &. A. Rezzoug, ¨ Modelling rotor cage induction motors for default detection¨, IEEE International SDEMPED, pp.41-47, 1997.

A. Bellini, F. Filippetti, G. Franceschini, and &. C. Tassoni, ¨Towards a correct quantification of induction machines broken bars through input electric signals¨, ICEM'00, Finland, pp.781-785, 2000.

N. Bianchi and S. Bologniani, Design techniques for reducing cogging torque in surface mounted PM motors, IEEE Trans. Industrial Application, vol.38, issue.5, 2002.

]. N. Bia-05a and . Bianchi, Electrical Machine Analysis using Finite Elements, 2005.

]. N. Bia-05b, S. Bianchi, F. Bolognani, and . Luise, Analysis and Design of a PM Brushless Motor for High-Speed Operations", Energy conversion, IEEE transactions on, issue.3, pp.20-629, 2005.

]. N. Bia-05c, S. Bianchi, and . Bolognani, Tolerant PM Motors in Automotive Applications, IEEE Conf. on Vehicle and power propulsion, pp.747-755, 2005.

R. Bigret and J. L. Féron, Diagnostic, maintenance, disponibilité des machines tournantes, Editions MASSON, 1994.

A. H. Bonnett and G. C. Soukup, Cause and analysis of stator and rotor failures in three-phase squirrel-cage induction motors, IEEE Transactions on Industry Applications, vol.28, issue.4, pp.921-937, 1992.
DOI : 10.1109/28.148460

A. H. Bonnett, Cause and analysis of Anti-Friction Bering Failures in A.C Induction Motors, IEEE Transactions on Industry Application, pp.14-23, 1993.

T. Boileau, B. Nahid-mobarakeh, F. Meibody-tabar, and ¨. Back, Back-EMF Based Detection of Stator Winding Inter-turn Fault for PM Synchronous Motor Drives, 2007 IEEE Vehicle Power and Propulsion Conference, pp.95-100, 2007.
DOI : 10.1109/VPPC.2007.4544105

G. Melero, J. G. Aleixandre, and J. Solares, SERRA ; ¨Minimizing torque ripple in permanent magnet synchronous motors with polymer-bonded magnets¨,magnets¨Shaft misalignment diagnosis of induction motors using current spectral analysis : A theoretical approach, Proc. International Conference on Electrical Machines (ICEM), pp.1371-1377, 2002.

A. J. Marques-cardoso, S. M. Cruz, and &. S. Fonseca, Inter-turn stator winding fault diagnosis in three-phase induction motors, by Park's vector approach, IEEE Transactions on Energy Conversion, vol.14, issue.3, 1999.
DOI : 10.1109/60.790920

A. Cruz and . Cardoso, Stator fault diagnosis in three-phase synchronous and asynchronous motors, IEEE Transaction on Industrial Applications, vol.37, issue.5, 2001.

J. Cusido, L. Romeral, J. A. Ortega, J. A. Rosero, and A. Garcia-spinosa, Fault Detection in Induction Machines by Using Power Spectral Density on the Wavelet Decompositions, 37th IEEE Power Electronics Specialists Conference, pp.633-643, 2008.
DOI : 10.1109/PESC.2006.1712271

M. Dai, . Keyhani, and T. Sebastian, Fault Analysis of a PM Brushless DC Motor Using Finite Element Method, IEEE Transactions on Energy Conversion, vol.20, issue.1, 2005.
DOI : 10.1109/TEC.2004.841516

V. Devanneaux, H. Kabbaj, B. Dagues, and J. Faucher, An accurate model of squirrel cage induction machines under static, dynamic or mixed eccentricity, Proc. IEEE SDEMPED, pp.121-126, 2001.

G. Didier, E. Ternisien, O. Caspary, and H. Razik, A new approach to detect broken rotor bars in induction machines by current spectrum analysis, Mechanical Systems and Signal Processing, vol.21, issue.2, pp.1127-1142
DOI : 10.1016/j.ymssp.2006.03.002

URL : https://hal.archives-ouvertes.fr/hal-00115405

T. Ding, N. Takorabet, F. M. Sargos, and X. Wang, Design and Analysis of Different Line-Start PM Synchronous Motors for Oil-Pump Applications, IEEE Transactions on Magnetics, vol.45, issue.3, pp.1816-1819, 2009.
DOI : 10.1109/TMAG.2009.2012772

N. M. Elkasabgy, A. R. Eastham, and G. E. Dawson, Detection of broken bars in the cage rotor on an induction machine, IEEE Transactions on Industry Applications, vol.28, issue.1, pp.165-171, 1992.
DOI : 10.1109/28.120226

J. A. Farooq, R. Tsarafidy, D. Abdesslem, and A. Miraoui, Modelling and simulation of stator winding inter-turn faults in permanent magnet synchronous motors, p.27, 2008.

F. Filipetti, G. Franceschini, C. Tassoni, and P. Vas, Recent developments of induction motor drives fault diagnosis using AI techniques, IEEE Transactions on Industrial Electronics, vol.47, issue.5, pp.994-1004, 2000.
DOI : 10.1109/41.873207

F. Fillippitti, G. Franceshini, C. Tassoni, and &. P. Vas, Broken bar detection in induction machines: comparison between current spectrum approach and parameter estimation approach, Proceedings of 1994 IEEE Industry Applications Society Annual Meeting, pp.94-102, 1999.
DOI : 10.1109/IAS.1994.345493

A. Fodorean and . Miraoui, Dimensionnement rapide des machines synchrones à aimants permanents (MSAP), Editions Technique

C. Gerada and ;. Bradley, Integrated PM Machine Design for an Aircraft EMA, IEEE Transactions on Industrial Electronics, vol.55, issue.9, pp.3300-3306, 2008.
DOI : 10.1109/TIE.2008.927970

L. Geun-ho, K. Sung-il, H. Jung-pyo, and B. Ji-hyung, Torque Ripple Reduction of Interior Permanent Magnet Synchronous Motor Using Harmonic Injected Current, IEEE Transactions on Magnetics, vol.44, issue.6, pp.1582-1585, 2006.
DOI : 10.1109/TMAG.2008.915776

E. S. Hamdi, Design of small electrical machines, 1994.

D. Howe, K. Ngand, and Z. Q. Zhu, ¨Open-circuit field distribution in a brushless motor with diamatically magnetized PM rotor, accounting for slotting, and eddy current effects¨, IEEE Trans.Trans. Magnetics, vol.32, issue.5, pp.5070-5072, 1996.

]. S. Hosseini, M. Agha-mirsalim, and M. Mirzaei, Design, Prototyping, and Analysis of a Low Cost Axial-Flux Coreless Permanent-Magnet Generator, IEEE Transactions on Magnetics, vol.44, issue.1, 2008.
DOI : 10.1109/TMAG.2007.909563

G. Houdouin, G. Barakat, E. Dakyo, and . Destobbeleer, ¨ A Method for the simulation of inter-turn short circuits in squirrel cage induction machines¨, 2002.

G. Houdouin, G. Barakat, E. Dakyo, and . Destobbeleer, A winding function theory based global method for the simulation of faulty induction machines, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03., 2003.
DOI : 10.1109/IEMDC.2003.1211279

R. Isermann and &. P. Balle, Trends in the application of model-based fault detection and diagnosis of technical processes, Control Engineering Practice, vol.5, issue.5, pp.709-719, 1997.
DOI : 10.1016/S0967-0661(97)00053-1

T. Ishikawa and G. R. Slemon, ¨ A method of reducing ripple torque in permanent magnet motorswithout skewing¨, IEEE Transactions on Magnetics, 1993.

W. Jiabin, W. Weiya, G. W. Jewell, and D. Howe, Design of a miniature permanentmagnet generator and energy storage system, Industrial Electronics IEEE Transactions on, issue.5s, pp.52-1383, 2005.

]. G. Joksimovic and J. Penman, The detection of inter-turn short circuits in the stator windings of operating motors, IEEE Transactions on Industrial Electronics, vol.47, issue.5, pp.1078-1084, 2000.
DOI : 10.1109/41.873216

]. Jung, J. Lee, and B. Kwon, Online Diagnosis of Induction Motors Using MCSA, IEEE Transactions on Industrial Electronics, vol.53, issue.6, pp.1842-1852, 2006.
DOI : 10.1109/TIE.2006.885131

C. S. Kallesoe, ;. P. Vadstrup, ;. H. Rasmussen, and ;. R. Izadi-zamanabadi, Estimation of stator winding faults in induction motors using an adaptive observer scheme, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting., 2004.
DOI : 10.1109/IAS.2004.1348569

A. Kioumarsi, M. Moallem, and B. Fahimi, Mitigation of Torque Ripple in Interior Permanent Magnet Motors by Optimal Shape Design, IEEE Transactions on Magnetics, vol.42, issue.11, pp.3706-3711, 2006.
DOI : 10.1109/TMAG.2006.881093

G. B. Kliman, R. A. Koegl, J. Stein, R. D. Endicott, and &. M. Madden, Noninvasive detection of broken rotor bars in operating induction motors, IEEE Transactions on Energy Conversion, vol.3, issue.4, pp.873-879, 1988.
DOI : 10.1109/60.9364

G. B. Kliman, W. J. Permerlani, and R. A. , A new approach to on-line turn fault detection in AC motors, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting, 1996.
DOI : 10.1109/IAS.1996.557113

V. Kogan and &. B. Nindra, Investigation of high voltage stator winding vibrations in fullscale slot model, Electrical Insulation Conference, pp.155-166, 1997.

]. K. Kyusung, A. G. Parlos, and R. M. Bharadwaj, Sensorless fault diagnosis of induction motors, IEEE Transactions on Industrial Electronics, vol.50, issue.5, pp.1038-1051, 2003.
DOI : 10.1109/TIE.2003.817693

R. Lateb, N. Takorabet, and F. Meibody-tabar, Effect of magnet segmentation on the cogging torque in surface-mounted permanent-magnet motors, IEEE Transactions on Magnetics, vol.42, issue.3, pp.442-445, 2006.
DOI : 10.1109/TMAG.2005.862756

S. Bin-lee, R. M. Tallam, and T. G. Habetler, A robust on-line turn-fault detection technique for induction machin es based on monitoring the sequence component impedance matrix, IEEE transaction on power electronics, vol.18, issue.3, 2003.

H. A. Liao, T. A. Toliyat, and . Lipo, Multiple coupled circuit modelling of induction machines, IEEE Trans. Industrial Application, vol.31, pp.311-317, 1995.

A. Mahyob and ;. Barakat, Permeance Network Modeling of the Stator Winding Faults in Electrical Machines, IEEE Transactions on Magnetics, vol.45, issue.3, 2009.
DOI : 10.1109/TMAG.2009.2012780

M. G. Maléro, M. F. Cabanas, F. R. Faya, C. H. Rojas, and &. J. Solares, Electromagnetic torque harmonics for on-line inter turn short circuits detection in squirrel cage induction motors, p.99, 1999.

J. P. Martin, ¨ Contribution à l'alimentation en tension de machines synchrones à aimants permanents à nombre de phase élevé : fonctionnement normal et dégradé¨, Thèse de doctorat de l'INPL, 2003.

B. C. Mecrow, A. G. Jack, D. J. Atkinson, S. R. Green, G. J. Atkinson et al., Design and Testing of a Four-Phase Fault-Tolerant Permanent-Magnet Machine for an Engine Fuel Pump, IEEE Transactions on Energy Conversion, vol.19, issue.4, 2006.
DOI : 10.1109/TEC.2004.832074

O. A. Mohammad, Z. Liu, S. Liu, and N. Y. Abed, Internal Short Circuit Fault Diagnosis for PM Machines Using FE-Based Phase Variable Model and Wavelets Analysis, IEEE Transaction On Magnetics, vol.33, issue.4, 2007.

O. A. Mohammad and N. A. Demerdash, ¨A 3-D finite element perturbation method for determining satured values of transformer winding inductances including experimental verification, IEEE Transaction On Magnetics, vol.21, issue.5, 1985.

S. Moreau, Contribution à la modélisation et à l'estimation paramétrique des machines électriques à courant alternatif: Application au diagnostic, Thése de doctorat, 1999.

]. G. Muller and C. F. Landy, A novel method to detect rotor bars in squirrel cage induction motors when interbar currents are present, IEEE Power Engineering Society Meeting, vol.3, issue.4, 2003.

M. S. Naït-saïd, M. E. Benbouzid, and A. Et-benchaid, Detection of broken bars in induction motors using an extended Kalman filter for rotor resistance sensorless estimation, IEEE Transactions on Energy Conversion, vol.15, issue.1, pp.66-70, 2000.
DOI : 10.1109/60.849118

]. S. Nan-99, H. A. Nandi, and . Toliyat, Condition monitoring and fault diagnosis of electrical machines ? a review, IEEE Industry Applications Conference.Thirty-Fourth IAS Annual Meeting, pp.197-204, 1999.

C. Noel, N. Takorabet, and F. Meibody-tabar, Short-circuit current reduction technique for surface mounted PM machines high torque-low speed applications, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting., 2004.
DOI : 10.1109/IAS.2004.1348609

L. Parsa and H. Toliyat, Fault-Tolerant Interior-Permanent-Magnet Machines for Hybrid Electric Vehicle Applications, IEEE Transactions on Vehicular Technology, vol.56, issue.4, 2007.
DOI : 10.1109/TVT.2007.896978

Z. Ping, Z. Jing, J. Han, W. Jie, Y. Zhiyuan et al., ¨ Optimization of the Magnetic Pole Shape of a Permanent-Magnet Synchronous Motor¨, IEEE Transactions, vol.43, issue.6s, pp.2531-2537, 2007.

S. Pöyhönen, M. Negrea, P. Jover, A. Arkkio, and H. Hyötyniemi, Numerical magnetic field analysis and signal processing for fault diagnostics of electrical machines, Journal COMPEL, issue.4, p.22, 2003.

M. Xuan, J. J. Simond, D. Schafer, and E. Stephan, Synchronous machines parameters determination using finite element method, 2000.

]. M. Sahraoui, ;. A. Ghoggal, ;. S. Zouzou, ;. A. Aboubou, and ;. H. Razik, Modelling and Detection of Inter-Turn Short Circuits in Stator Windings of Induction Motor, IECON 2006, 32nd Annual Conference on IEEE Industrial Electronics, 2006.
DOI : 10.1109/IECON.2006.348093

URL : https://hal.archives-ouvertes.fr/hal-00084800

T. Swata, P. C. Kajer, C. Cossar, and T. J. Miller, Fault-tolerant operation of single-phase SR generators, IEEE Transactions on Industry Applications, vol.35, issue.4, pp.774-781, 1999.
DOI : 10.1109/28.777184

M. H. Hameyer and K. , Combined numerical and analytical method for geometry optimization of a PM motor, IEEE. Trans. Magnetics, vol.42, issue.4, 2006.

E. Semail, X. Kestelyn, and F. Locment, Fault tolerant multiphase electrical drives: the impact of design, The European Physical Journal Applied Physics, vol.1, issue.2, pp.159-163
DOI : 10.1051/epjap:2003034

URL : https://hal.archives-ouvertes.fr/hal-00819009

. Annexes, Shamsi-Nejad, Architectures d'Alimentation et de Commande d'Actionneurs Tolérants aux Défauts -Régulateur de Courant Non Linéaire à Large Bande Passante, Thèse de doctorat de l'INPL, 2007.

T. J. Sobczyk and A. Izworski, Recognition of rotor eccentricity of induction motor based on the fourier spectra of phase currents, Proc. ICEM'98, pp.408-413, 1998.

N. Takorabet, J. P. Caron, B. Vaseghi, B. Nahidmoubarakeh, and F. , Meibody-tabar, ¨Study of Different Architectures of Fault Tolerant Actuator Using Double Star PM Motor¨, Proc. CDROM, Alberta Canada, 2008.

]. R. Tallam, T. G. Habetler, and R. G. Harley, Transient model for induction machines with stator winding turn faults, IEEE Transaction on Industrial Applications, vol.38, issue.3, 2002.

R. M. Tallam, S. B. Lee, G. C. Stone, G. B. Kliman, J. Yoo et al., A Survey of Methods for Detection of Stator-Related Faults in Induction Machines, IEEE Transactions on Industry Applications, vol.43, issue.4, pp.920-933, 2007.
DOI : 10.1109/TIA.2007.900448

D. Thailly, R. Romary, D. Roger, and J. Brudny, Attenuation of magnetic field components through an AC machine stator, COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, vol.27, issue.4, 2008.
DOI : 10.1109/TEC.2006.875465

O. V. Thorsen and M. Dalva, A survey of faults on induction motors in offshore oil industry, petrochemical industry, gas terminals, and oil refineries, IEEE Transactions on Industry Applications, vol.31, issue.5, pp.1186-1196, 1995.
DOI : 10.1109/28.464536

H. A. Toliyat and T. A. Lipo, Transient analysis of cage induction machines under stator, rotor bar and end ring faults, IEEE Transactions on Energy Conversion, vol.10, issue.2, pp.241-247, 1995.
DOI : 10.1109/60.391888

J. C. Trigeassou, T. Poinot, and &. S. Moreau, ¨A methodology for estimation of physical parameters¨, 16th IMACS, Applied mathematics and simulation, 2000.

]. P. Vas, F. Filippetti, G. Franceschili, and C. Tassoni, ¨ Transient modelling oriented to diagnostics of induction machines with rotor asymmetries¨, p.94, 1994.

]. B. Vaseghi, B. Nahid-mobarakeh, N. Takorabet, and F. , Meibody-tabar, ¨Modelling of nonsalient PM synchronous Machines under stator winding inter-turn fault conditions: Dynamic model-Fem Modeï, 2007.

]. B. Vas-08a, N. Vaseghi, B. Takorabet, F. Nahidmobarakeh, and . Meibody-tabar, Modelling and FEM Validation of PM Synchronous Machines under Stator Winding inter-turn Fault, IEEE ELECTRIMACS, 2008.

]. B. Vas-08b, N. Vaseghi, and F. Takorabet, Meibody-Tabar, ¨Modelling of IM with Stator Winding inter-turn Fault Validated by FEM¨, Proc. PD3-2, Portugal, 2008.

]. B. Vas-08c, B. Vaseghi, N. Nahidmobarakeh, F. Takorabet, and . Meibody-tabar, Experimentally Validated Dynamic Fault Model for PMSM with Stator Winding inter-turn Fault, IEEE IAS 2008 Annual meeting Proc. CDROM , Alberta Canada, 2008.

. Vas, B. Vaseghi, N. Takorabet, and F. Meibody-tabar, Fault Analysis and Parameter Identification of PM Motors by the Finite Element Method, IEEE Transactions on Magnetics, vol.45, issue.9, 2009.

]. B. Vas-09b, N. Vaseghi, F. Takorabet, and . Meibody-tabar, Stator Turn Fault Study and Parameter Extraction of Induction Machines Using FEM, Journal COMPEL, 2009.

R. F. Walliser and C. F. Landy, Determination of interbar current effects in the detection of broken rotor bars in squirrel cage induction motors, IEEE Transactions on Energy Conversion, vol.9, issue.1, pp.152-158, 1994.
DOI : 10.1109/60.282486

J. F. Watson, N. C. Paterson, and D. G. , Use of finite element methods to improve techniques for the early detection of faults in induction motors, IEEE Transaction on Energy Conversion, vol.14, issue.3, 1999.

S. Wu, L. Song, and S. Cui, Study on Improving the Performance of Permanent Magnet Wheel Motor for the Electric Vehicle Application, IEEE Transactions on Magnetics, vol.43, issue.1, pp.438-442, 2008.
DOI : 10.1109/TMAG.2006.887705

W. Songlin, S. Weijian, &. L. Yuguang, and . Xu, A study of armature winding internal faults and protection schemes for turbogenerators, IEEE Industry Applications Conf, 2000.

C. Xuan, B. Ramirez, J. J. Kawkabani, and . Simond, Automatic determination of laminated salient-pole synchronous machines parameters based on the finite element method, Electrimacs, 1999.

H. Yahoui, J. Seetohul, G. Grellet, and A. Jammal, Detection of broken bar or end-ring fault in asynchronous machines by spectrum analysis of the observed electromagnetic torque through supply cable, Revue Européenne de Diagnostic et Sûreté de Fonctionnement, 1995.

Y. Li, X. Jingwei, W. Tianbao, and Y. Lu, Programmable Design of Magnet Shape for Permanent-Magnet Synchronous Motors With Sinusoidal Back EMF Waveforms, Magnetics IEEE Transactions on, vol.44, issue.9s, pp.2163-2167, 2008.

D. Zarko, D. Ban, and T. A. Lipo, Analytical Solution for Cogging Torque in Surface Permanent-Magnet Motors Using Conformal Mapping, IEEE Transactions on Magnetics, vol.44, issue.1, pp.52-65, 2006.
DOI : 10.1109/TMAG.2007.908652

F. Zidani, D. Diallo, M. E. Benbouzid, and R. Nait-said, A Fuzzy-Based Approach for the Diagnosis of Fault Modes in a Voltage-Fed PWM Inverter Induction Motor Drive, IEEE Transactions on Industrial Electronics, vol.55, issue.2, pp.586-593, 2008.
DOI : 10.1109/TIE.2007.911951

URL : https://hal.archives-ouvertes.fr/hal-00524628

L. Z. Zhu-;-s, . Q. Jiang-;-z, . C. Zhu-;-c, and . Chan, Analytical Methods for Minimizing Cogging Torque in Permanent-Magnet Machines, IEEE transactions on magnetics, vol.45, issue.4, pp.2023-2031, 2009.