B. Amadei, Rock anisotropy and the theory of stress measurements, Lecture Notes in Engineering, vol.2, 1983.
DOI : 10.1007/978-3-642-82040-3

B. Amadei and O. Stephansson, Rock stress and its measurement, 1997.
DOI : 10.1007/978-94-011-5346-1

A. G. Rejeb and A. , Effet of a fractured zone on drift behaviour in the argillaceous Tournemire site (France), Proc. of the Vith Regional Rock Mechanics Symposium, pp.9-11, 2002.

D. Ask, Evaluation of measurement rated uncertainties in the analysies of overcoring rock stress data from Äspö HRL, Sweden: a case study, International Journal of Rock Mechanics & Mining Sciences, vol.40, pp.7-8, 2003.

D. Ask, New developments in the Integrated Stress Determination Method and their application to rock stress data at the ??sp?? HRL, Sweden, International Journal of Rock Mechanics and Mining Sciences, vol.43, issue.1, pp.107-126, 2006.
DOI : 10.1016/j.ijrmms.2005.04.011

D. Ask, Measurement-related uncertainties in overcoring data at the ??sp?? HRL, Sweden. Part 2: Biaxial tests of CSIRO HI overcore samples, International Journal of Rock Mechanics and Mining Sciences, vol.43, issue.1, pp.127-138, 2006.
DOI : 10.1016/j.ijrmms.2005.05.012

A. Barbreau and J. Y. Boisson, Caractérisation d'une formation argileuse: synthèse des principaux résultats obtenus à partir du tunnel de Tournemire de Janvier 1992 à Juin 1993, p.2, 1993.

B. Ouanas and A. , Développement d'une méthode de caractérisation in situ des propriétés rhéologiques des massifs rocheux ; Application à l'argilite de Tournemire. Rapport de l'Institut de Radioprotection et de Sûreté Nucléaire réf, IRSN DEI, pp.2009-2010, 2009.

B. Ouanas, A. Gunzburger, Y. Lahaie, F. Piguet, J. Et-barnichon et al., Mechanical testing of hollow cores to determine elastic parameters of anisotropic rocks using the CSIRO HI cell, Proceeding of the European Rock Mechanics Symposium, pp.15-18, 2010.
URL : https://hal.archives-ouvertes.fr/ineris-00970674

B. Ouanas, A. Gunzburger, Y. Lahaie, F. Piguet, J. Et-barnichon et al., Mechanical testing of hollow cores to determine elastic parameters of anisotropic rocks using the CSIRO HI cell ? Application to the Tournemire argilite, The Fifth International Conference on Advances in Mechanical Engineering and Mechanics (ICAMEM2010). [article accepté le 13 octobre, 2010.
URL : https://hal.archives-ouvertes.fr/ineris-00970745

D. Berry, The theory of stress determination by means of stress relief techniques in a transversely isotropic medium, p.36, 1968.

R. Bertillson, Temperature effects in overcoring stress measurements, 2007.

P. Bigarré and . Camus, Agence nationale pour la gestion des déchets radioactifs réf, 1993.

B. Bonin, Deep geological disposal in argillaceous formations: studies at the Tournemire test site, Journal of Contaminant Hydrology, vol.35, issue.1-3, pp.315-330, 1998.
DOI : 10.1016/S0169-7722(98)00132-6

B. H. Brady and E. T. Brown, Rock Mechanics for underground mining, Boston, 2004.

C. Nunez, J. Beaucaire, C. Bruno, G. , D. Windt et al., Synthèse des programmes de recherche 1995-1999, Projet TOURNEMIRE, 2001.

M. Cai and R. L. Blackwood, A technique for the recovery and re-use of CSIRO hollow inclusion cells, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.28, issue.2-3, pp.225-234, 1991.
DOI : 10.1016/0148-9062(91)92170-4

M. Cai, L. Qiao, C. Li, J. Vu, B. Yu et al., Application of an improved hollow inclusion technique for in situ stress measurement in Xincheng Gold Mine, China, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.32, issue.7, pp.735-739, 1995.
DOI : 10.1016/0148-9062(95)00020-H

M. Cai, L. Qiao, and J. Et-yu, Study and Tests of Techniques for Increasing Overcoring Stress Measurement Accuracy Cazacu O. [1995], Contribution à la modélisation élasto-viscoplastique d'une roche anisotrope, 1995.

C. Clément, Auscultation d'un versant rocheux soumis aux sollicitations thermiques naturelles. Cas des Rochers de Valabres (Alpes-Maritimes), Thèse de doctorat à Nancy-Université, 2008.

I. Contrucci, Mesures de diagraphie ultrasonique sur la station expérimentale de Tournemire, 2006.

P. Cuxac, Propagation et atténuation des ondes ultrasoniques dans les roches fissurées et anisotrpes, Thèse de doctorat à Nancy-Université, 1991.
DOI : 10.1051/geotech/1992059049

A. H. Deliormanli, L. Burlini, and A. B. Et-yavuz, Anisotropic dynamic elastic properties of Triassic Milas marbles from Mugla region in Turkey, International Journal of Rock Mechanics and Mining Sciences, vol.44, issue.2, pp.279-288, 2007.
DOI : 10.1016/j.ijrmms.2006.07.004

D. Fama, M. E. Pender, and M. J. , Analysis of the hollow inclusion technique for measuring In Situ rock stress, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.17, issue.3, pp.137-146, 1980.
DOI : 10.1016/0148-9062(80)91360-1

J. Fitzpatrick, Biaxial device for determining the modulus of elasticity of stress-relief cores, of the Interior, Bureau of Mines , report of investigations, vol.6128, p.13, 1962.

K. Fouial, Nouvelle méthode d'interprétation des mesures des contraintes par surcarottage adaptée aux roches à comportement non linéaire ou fracturées, 1997.

P. Garitty, R. A. Irvin, and I. W. Et-farmer, Problems associated with near surface in-situ sress measurements by the overcoring method. 26 th US symposium on rock mechanics, Rapid city SD, pp.26-28, 1983.

R. Giot, Interprétation des mesures de contraintes par relaxation dans les formulations argileuses profondes, Thèse de doctorat à Nancy-Université, 2004.

M. Hakala, Quality Control for Overcoring Stress Mesurement Data, 2006.

M. Hakala, J. A. Hudson, and R. Et-christiansson, Quality control of overcoring stress measurement data, International Journal of Rock Mechanics and Mining Sciences, vol.40, issue.7-8, pp.7-8, 2003.
DOI : 10.1016/j.ijrmms.2003.07.005

M. Hakala and J. Sjöberg, A methodology of interpretation of overcoring stress measurements in anisotropic rock, pp.2006-99, 2006.

N. Hast, Measuring stress and deformations in solid materials, 1943.

N. Hast, The measurement of rock pressure in mines, Sveriges Geo. Undersokning, Ser. C, issue.560, 1958.

&. Homand and . Duffaut, Manuel de mécanique des roches, Tome 1 : Fondements. 265 pages, pp.2-911762, 2000.

F. Homand, E. Morel, J. Henry, C. P. Et-hammade, and E. , Characterization of the moduli of elasticity of an anisotropic rock using dynamic and static methods, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.30, issue.5, pp.527-535, 1993.
DOI : 10.1016/0148-9062(93)92218-F

R. A. Irvin, P. Garitty, and I. W. Et-farmer, The effect of boundary yield on the results of in situ stress measurements using overcoring techniques, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.24, issue.1, pp.89-93, 1987.
DOI : 10.1016/0148-9062(87)91237-X

P. K. Kaiser, D. Zou, and P. A. Et-lang, Stress determination by back-analysis of excavation-induced stress changes ? a case study, Rock Mechanics and Rock Engineering, vol.23, issue.3, pp.185-200, 1990.
DOI : 10.1007/BF01022953

G. Kirsch, Die theorie der elastizitat und die bedürfnisse der festigkeitslehre, Veit. Ver. Deu. Ing, vol.42, pp.797-807, 1898.

F. Lahaie, Détermination in situ du tenseur des contraintes autour du tunnel et des galeries de la station expérimentale de Tournemire par surcarottage. Déroulement et résultats préliminaires des campagnes de mesure de décembre 2005 et janvier, 2006.

F. Lahaie, Y. Gunzburger, B. Ouanas, A. Barnichon, J. Bigarré et al., Impact of epoxy glue curing time on the quality of overcoring stress measurements in low-temperature environments, Proceeding of the 5th International Symposium on In-situ Rock Stress and Earthquakes, pp.25-27, 2010.
URL : https://hal.archives-ouvertes.fr/ineris-00970741

E. R. Leeman, Absolute rock stress measurements usin a borehole trepanning stress-relieving technique, Proc. 6 th US Symp. Rock Mech, pp.407-433, 1964.

E. Leeman and D. J. Hayes, A technique for determining the complete state of stress in rock using a single borehole, Proc. 1 st Cong, pp.17-24, 1966.

S. Lekhnitskii, Theory of elasticity of an anisotropic elastic body Holden-day series in mathematical physics, 1963.

U. Lindfors, Overcoring rock stress measurements in borehole KFM07B. Forsmark site investigation. Rapport SKB Swedish Nuclear Waste and Management Company, réf. P-06-93, pp.84-1651, 2007.

C. D. Martin and B. Simpson, The effect of sample disturbance on laboratory properties of Lac du Bonnet granite, Canadian Geotechnical Journal, vol.31, issue.5, pp.692-702, 1994.
DOI : 10.1139/t94-081

H. F. Mohr, Measurement of rock pressure, Mine Quarry Eng, vol.22, pp.178-89, 1956.

C. Nadim, Mesures de contraintes par surcarottage au barrage du Chambon (38) Rapport de l'Institut National de l'Environnement Industriel et des Risques réf, 2010.

H. Niandou, Étude du comportement rhéologique et modélisation de l'argilite de Tournemire. Applications à la stabilité d'ouvrages souterrains, Thèse de doctorat à l'Université des Sciences et Technologies de Lille, 1994.

H. Niandou, J. F. Shao, J. P. Henry, and D. Et-fourmaintraux, Laboratory investigation of the mechanical behaviour of Tournemire shale, International Journal of Rock Mechanics and Mining Sciences, vol.34, issue.1, pp.3-17, 1997.
DOI : 10.1016/S1365-1609(97)80029-9

A. Nechnech, Modélisation numérique du problème de surcarottage : influence de la loi de comportement de la roche, Thèse de doctorat à Nancy- Université, 1998.

A. L. Nunes, A new method for determination of transverse isotropic orientation and the associated elastic parameters for intact rock, International Journal of Rock Mechanics and Mining Sciences, vol.39, issue.2, pp.257-273, 2002.
DOI : 10.1016/S1365-1609(02)00025-4

Y. Obara and Y. Ishiguro, Measurements of induced stress and strength in the near-field around a tunnel and associated estimation of the Mohr???Coulomb parameters for rock mass strength, International Journal of Rock Mechanics and Mining Sciences, vol.41, issue.5, pp.761-769, 2004.
DOI : 10.1016/j.ijrmms.2004.01.013

Y. Obara and K. Sugawara, Updating the use of the CCBO cell in Japan: overcoring case studies, International Journal of Rock Mechanics and Mining Sciences, vol.40, issue.7-8, pp.7-8, 2003.
DOI : 10.1016/j.ijrmms.2003.07.007

A. Rejeb, Mechanical characterisation of the argellious Tournemire site (France) Proceedings of ROCKSITE-99, 1999.

A. Rejeb, De l'observation à la modélisation des zones perturbées par l'excavation des ouvrages dans le site de Tournemire. Note technique de l'Institut de Radioprotection et de Sûreté Nucléaire réf, IRSN DEI, pp.2006-2007, 2006.

A. Rejeb and J. Cabrera, Time-dependent evolution of the excavation damaged zone in the argelious Tournemire site Advances on coupled thermohydro-mechanical-chemical, Processes in Geosystems and Engeneering GeoProc, pp.65-74, 2006.

A. Rejeb, B. Humbert, and G. Et-vouille, Projet Tournemire, programme mécanique, caractérisation du comportement mécanique au laboratoire. Rapport de l'Institut de Radioprotection et de Sûreté Nucléaire réf, 1999.

A. Rejeb, A. Millard, A. Rouabhi, and M. Et-tijani, Modelling approaches of the excavation damaged zone (EDZ) around the old tunnel at the argillaceous Tournemire site Advances on coupled thermo-hydro-mechanical-chemical Processes in Geosystems and Engeneering GeoProc, pp.370-375, 2006.

J. Sjöberg, Overcoring rock stress measurements in borehole KFM01B. Forsmark site investigation. Rapport SKB Swedish Nuclear Waste and Management Company, réf. P-04-83, pp.105-1651, 2004.

J. Sjöberg, R. Christiansson, and J. A. Et-hudson, ISRM Suggested Methods for rock stress estimation???Part 2: overcoring methods, International Journal of Rock Mechanics and Mining Sciences, vol.40, issue.7-8, pp.7-8, 2003.
DOI : 10.1016/j.ijrmms.2003.07.012

J. Sjöberg and H. Klasson, Stress measurements in deep boreholes using the Borre (SSPB) probe. Special Issue of the, International Journal of Rock Mechanics and Mining Sciences, vol.40, pp.7-8, 2003.

J. Sjöberg and F. Perman, Overcoring rock stress measurements in borehole KLX04. Oskarshamn site investigation. Rapport SKB Swedish Nuclear Waste and Management Company, réf. P-05-69, pp.104-1651, 2006.

M. A. Slobodov, Test application of the load relief method for investigating stresses in deep rock, pp.30-35, 1958.

M. Souley, Inversion des propriétés élastiques anisotropes des argilites de Tournemire à partir d'essais biaxiaux sur carottes surforées. Note technique de l'Institut National de l'Environnement Industriel et des Risques réf, 2008.

P. M. Thompson and N. A. Chandler, In situ rock stress determinations in deep boreholes at the Underground Research Laboratory, situ rock stress determinations in deep boreholes at the Underground Research Laboratory, pp.1305-1316, 2004.
DOI : 10.1016/j.ijrmms.2004.09.003

R. J. Walton and G. Worotnicki, A comparison of three borehole instruments for monitoring the change of rock stress with time, Proc. International Symposium on Rock Stress Measurements, pp.1-3, 1986.

G. Worotnicki, CSIRO Triaxial Stress Measurement Cell, pp.329-94, 1993.
DOI : 10.1016/B978-0-08-042066-0.50020-3

G. Worotnicki and R. J. Walton, Triaxial « hollow inclusion » gauges for determination of rock stress in situ, Proc. IRSM Symp. On Investigation of Stress in Rock, Supplement, pp.1-8, 1976.