Systèmes techniques : lois d'évolution et théorie de la conception, 2009. ,
Technology transfer revisited from the perspective of the knowledge-based economy, Research Policy, vol.30, issue.9, pp.1459-1478, 2001. ,
DOI : 10.1016/S0048-7333(01)00162-7
Measuring the efficiency of university technology transfer, Technovation, vol.27, issue.5, pp.306-318, 2007. ,
DOI : 10.1016/j.technovation.2006.10.003
Do specific forms of university-industry knowledge transfer have different impacts on the performance of private enterprises? An empirical analysis based on Swiss firm data, The Journal of Technology Transfer, vol.70, issue.2, pp.504-533, 2008. ,
DOI : 10.1007/s10961-007-9061-z
Creation of high tech SMEs: The influence of local environment, Small Business Economics, 2005. ,
A Bayesian learning of probabilistic relations between perceptual attributes and technical characteristics of car dashboards to construct a perceptual evaluation model, International Journal of Product Development, vol.7, issue.1/2, pp.47-72, 2009. ,
DOI : 10.1504/IJPD.2009.022276
URL : https://hal.archives-ouvertes.fr/hal-00748729
Variable precision rough set theory and data discretisation: an application to corporate failure prediction, Omega, vol.29, issue.6, pp.561-576, 2001. ,
DOI : 10.1016/S0305-0483(01)00045-7
Evolution management towards interoperable supply chains using performance measurement, Computers in Industry, vol.58, issue.7, pp.720-732, 2007. ,
DOI : 10.1016/j.compind.2007.05.011
URL : https://hal.archives-ouvertes.fr/hal-00187297
Ingénierie de l'innovation, 2009. ,
Innovation in low tech SMBs: evidence of a necessary constructivist approach, Technovation, vol.20, issue.3, pp.161-168, 2000. ,
DOI : 10.1016/S0166-4972(99)00099-1
La recherche qualitative: Un autre principe d'action et de communication, Rev Med Ass Maladie, vol.32, pp.117-121, 2001. ,
Innovation, collaboration and SMEs internal research capacities, Research Policy, vol.31, issue.5, pp.31-735, 2002. ,
DOI : 10.1016/S0048-7333(01)00144-5
Intermediary Objects as a Means to Foster Co-operation in Engineering Design, Computer Supported Cooperative Work (CSCW), vol.19, issue.2, pp.205-219, 2003. ,
DOI : 10.1016/B978-1-55860-092-8.50006-X
Technology transfer and public policy: a review of research and theory, Research Policy, vol.29, issue.4-5, pp.627-655, 2000. ,
DOI : 10.1016/S0048-7333(99)00093-1
The Principles of brazing Resource document, 2002. ,
The Spirituality of Innovation: Learning from Stories, Journal of Product Innovation Management, vol.6, issue.5, pp.391-405, 1996. ,
DOI : 10.1111/1540-5885.1350391
Identifying product failure rate based on a conditional Bayesian network classifier, Expert Systems with Applications, vol.38, issue.5, 2010. ,
DOI : 10.1016/j.eswa.2010.09.146
URL : https://hal.archives-ouvertes.fr/hal-00748716
Menu of best practices in technology transfer (Part 2), The Journal of Technology Transfer, vol.17, issue.2-3, pp.24-33, 1992. ,
DOI : 10.1007/BF02199475
Proposition of a technology transfer project modeling approach: application to the metallic brazing industry, International Journal of Innovation and Technology Management, 2010. ,
«Le Génie des Systèmes Industriels en France : Développement et Perspectives», 1987. ,
Construction d'une échelle de mesure de la capacité d'absorption. XIIème Conférence de l'Association Internationale de Management Stratégique, 2003. ,
European initiatives to develop interoperability of enterprise applications???basic concepts, framework and roadmap, Annual Reviews in Control, vol.27, issue.2, pp.153-162, 2003. ,
DOI : 10.1016/j.arcontrol.2003.09.001
URL : https://hal.archives-ouvertes.fr/hal-00357663
Architectures for enterprise integration and interoperability: Past, present and future, Computers in Industry, vol.59, issue.7, pp.647-659, 2008. ,
DOI : 10.1016/j.compind.2007.12.016
URL : https://hal.archives-ouvertes.fr/hal-00357637
Interoperability in Collaborative Networks: Independent and industry-specific initiatives ??? The case of the footwear industry, Computers in Industry, vol.59, issue.7, pp.741-757, 2008. ,
DOI : 10.1016/j.compind.2007.12.012
Taking care of business, ASEE Prism Online, pp.1-5, 2000. ,
Absorptive Capacity: A New Perspective on Learning and Innovation, Administrative Science Quarterly, vol.35, issue.1, p.128, 1990. ,
DOI : 10.2307/2393553
DOE labs: models for tech transfer, IEEE Spectrum, vol.29, issue.12, pp.53-57, 1992. ,
DOI : 10.1109/6.177278
Decisional Interoperability, IFIP International Federation for Information Processing, pp.25-27, 2006. ,
DOI : 10.1037/13978-000
URL : https://hal.archives-ouvertes.fr/hal-00164375
Business failure prediction using rough sets, European Journal of Operational Research, vol.114, issue.2, pp.263-280, 1999. ,
DOI : 10.1016/S0377-2217(98)00255-0
URL : http://cs.tju.edu.cn/faculty/huqinghua/rough sets/Business failure prediction using rough sets.pdf
Interoperability in enterprise modelling: requirements and roadmap, Advanced Engineering Informatics, vol.18, issue.4, pp.193-203, 2004. ,
DOI : 10.1016/j.aei.2005.01.006
The Role of Objects in Design Co-Operation: Communication through Physical or Virtual Objects, Computer Supported Cooperative Work (CSCW), vol.19, issue.2, pp.145-151, 2003. ,
DOI : 10.1145/97243.97302
METHODOLOGICAL FIT IN MANAGEMENT FIELD RESEARCH., Academy of Management Review, vol.32, issue.4, pp.1155-1179, 2007. ,
DOI : 10.5465/AMR.2007.26586086
A practical view of strategies for improving federal technology transfer, Journal of Technology Transfer, vol.28, pp.3-4, 2003. ,
Cost estimates to guide pre-selection of processes, Materials & Design, vol.24, issue.8, pp.605-616, 2003. ,
DOI : 10.1016/S0261-3069(03)00136-5
Computer-based selection of joining processes, Materials & Design, vol.25, issue.7, pp.555-564, 2004. ,
DOI : 10.1016/j.matdes.2004.03.002
Intégration d'outils de simulation et d'optimisation pour le pilotage d'une ligne d'assemblage multiproduit à transfert asynchrone, Groupe de Recherche en Production Intégrée (G.R.P.I), 1999. ,
Le rôle des universités américaines dans l'emergence et l'accompagnement des spinoffs académiques : comparaison avec le système Français?, 2005. ,
University technology transfer: do incentives, management, and location matter, The Journal of Technology Transfer, vol.28, issue.1, p.17, 2003. ,
DOI : 10.1023/A:1021674618658
The Technical Enterprise, 1986. ,
A critical look at technological innovation typology and innovativeness terminology: a literature review, Journal of Product Innovation Management, vol.19, issue.2, pp.110-132, 2002. ,
DOI : 10.1016/S0737-6782(01)00132-1
Mémoire pour l'habilitation à diriger des recherches, 1998. ,
Technology transfer: Toward mapping the field, a review, and research directions, The Journal of Technology Transfer, vol.16, issue.No. 2, pp.3-4, 1993. ,
DOI : 10.1109/TEM.1975.6447196
Understanding the process of knowledge transfer to achieve successful technological innovation, Technovation, vol.16, issue.6, pp.301-312, 1996. ,
DOI : 10.1016/0166-4972(96)00012-0
Les fondements épistémologiques de la recherche, Méthodes de recherche en management, pp.13-33, 2007. ,
Incorporating the rough sets theory into travel demand analysis, Tourism Management, vol.24, issue.5, pp.511-517, 2003. ,
DOI : 10.1016/S0261-5177(03)00009-8
Investigation of University Industry Technology Transfer Cases: A Conceptual and Methodological Approach Part-2, The DRUID Winter Conference 2005 on Industrial Evolution and Dynamcis, 2005. ,
Bottom-up versus top-down policies towards the commercialization of university intellectual property, Research Policy, vol.32, issue.4, pp.639-658, 2003. ,
DOI : 10.1016/S0048-7333(02)00034-3
Rough sets theory for multicriteria decision analysis, European Journal of Operational Research, vol.129, issue.1, pp.1-47, 2001. ,
DOI : 10.1016/S0377-2217(00)00167-3
How to read a paper: Papers that go beyond numbers (qualitative research), BMJ, vol.315, issue.7110, pp.315740-743, 1997. ,
DOI : 10.1136/bmj.315.7110.740
Barriers and Bridges for Successful Environmental Technology Transfer, The Journal of Technology Transfer, vol.28, issue.2, pp.167-177, 2003. ,
DOI : 10.1023/A:1022998617118
Strategic technology partnering during the 1980s: Trends, networks and corporate patterns in non-core technologies, Research Policy, vol.24, issue.2, pp.207-231, 1995. ,
DOI : 10.1016/0048-7333(94)00763-W
Mapping the university technology transfer process, Journal of Business Venturing, vol.12, issue.6, pp.423-434, 1997. ,
DOI : 10.1016/S0883-9026(96)00064-X
Rough Sets approach to human resource development of information technology, IJSSST, vol.9, issue.2, pp.31-42, 2008. ,
Rough sets applied to materials data, Acta Materialia, vol.44, issue.11, pp.44-4475, 1996. ,
DOI : 10.1016/1359-6454(96)00110-3
Principles of Brazing, 2005. ,
Les objets intermédiaires de la conception: Modélisation et communication, 1995. ,
Les PME: Bilan et perspectives, 1997. ,
Perspective: Changing Product Development Strategy-A Managerial Challenge, Journal of Product Innovation Management, vol.14, issue.6, pp.473-484, 1997. ,
DOI : 10.1111/1540-5885.1460473
Management of technology: The key to competitiveness and wealth creation, 2000. ,
The role of intermediation and absorptive capacity in facilitating university???industry linkages???An empirical study of TAMA in Japan, Research Policy, vol.37, issue.8, pp.1224-1240, 2008. ,
DOI : 10.1016/j.respol.2008.04.014
A formal framework for business process modelling and design, Information Systems, vol.27, issue.5, pp.299-319, 2002. ,
DOI : 10.1016/S0306-4379(01)00055-2
Critical Success Factors in Technology Transfer from Government Laboratories to Private Sector: A Study Based on Canadian Federal Government Departments, Conference of the Administrative Sciences of Canada, 2007. ,
Commercializing new technologies in India: a perspective on policy initiatives, Technology in Society, vol.24, issue.3, pp.285-298, 2002. ,
DOI : 10.1016/S0160-791X(02)00009-X
The state of the science in technology transfer: Implications for the field of assistive technology, Journal of Technology Transfer, vol.28, pp.3-4, 2003. ,
Technology Transfer to the Private Sector: A Field Study of Manufacturer Buying behavior, Journal of Product Innovation Management, vol.4, issue.1, pp.26-43, 1992. ,
DOI : 10.1111/1540-5885.410043
Selection of joining methods in mechanical design, Materials & Design, vol.23, issue.4, pp.405-416, 2002. ,
DOI : 10.1016/S0261-3069(01)00093-0
Technology transfer between university research centers and industry in Singapore, Technovation, vol.24, issue.5, pp.433-442, 2004. ,
DOI : 10.1016/S0166-4972(02)00101-3
Technology transfer and public policy -Preparing for the twenty-first century (symposium), Policy Studies Journal, vol.22, issue.2, pp.259-399, 1994. ,
Discussion Document: Technology Transfer and National Innovation, International Conference on Technology Transfer, Intellectual Property Rights and Business Policy, 2004. ,
Transfert de technologie : Les dimensions oubliées. A partir de l'étude et la comparaison de trois, 2006. ,
Les épistémologies constructivistes, 1995. ,
Mémoire pour l'Habilitation à Diriger des Recherches: Projets et conception innovante, 2008. ,
Wellsprings of knowledge: Building and sustaining the sources of innovation, 1995. ,
Technology transfer as a learning and developmental process: an analysis of Norwegian programmes on technology transfer, Technovation, vol.13, issue.8, pp.13-497, 1993. ,
DOI : 10.1016/0166-4972(93)90065-4
Manuel de brasage fort: brazing manual, 1981. ,
Technology management methodologies and applications, Technovation, vol.25, issue.4, pp.381-393, 1995. ,
DOI : 10.1016/j.technovation.2003.08.002
University-based technology initiatives: Quantitative and qualitative evidence, Research Policy, vol.34, issue.3, pp.253-257, 2005. ,
DOI : 10.1016/j.respol.2005.01.005
A Dominance-based Rough Set Approach to customer behavior in the airline market, Information Sciences, vol.180, issue.11, pp.2230-2238, 2010. ,
DOI : 10.1016/j.ins.2010.01.025
Automated assembly scheduling: A review, Computer Integrated Manufacturing Systems, vol.7, issue.1, pp.51-61, 1994. ,
DOI : 10.1016/0951-5240(94)90053-1
Theory of Science and Technology Transfer and Applications (Systems evaluation, prediction, and decision-making series), 2009. ,
Interactive research, Scandinavian Journal of Management, vol.6, issue.2, pp.125-142, 1990. ,
DOI : 10.1016/0956-5221(90)90020-H
Investing in new materials: a tool for technology managers, Technovation, vol.25, issue.1, pp.15-23, 2005. ,
DOI : 10.1016/S0166-4972(03)00070-1
Aiding the technology manager: a conceptual model for intra-firm technology transfer, Technovation, vol.22, issue.7, pp.427-436, 2002. ,
DOI : 10.1016/S0166-4972(01)00030-X
La commercialisation de la recherche Actes de la recherche en sciences sociales, pp.57-67, 2003. ,
Rethinking technology transfer, Journal of Food Engineering, vol.67, issue.1-2, pp.135-145, 2005. ,
DOI : 10.1016/j.jfoodeng.2004.05.057
Overview of the development of heat exchangers for use in air-breathing propulsion pre-coolers, Acta Astronautica, vol.41, issue.11, pp.41-723, 1997. ,
DOI : 10.1016/S0094-5765(97)00199-9
A Dynamic Theory of Organizational Knowledge Creation, Organization Science, vol.5, issue.1, pp.14-37, 1994. ,
DOI : 10.1287/orsc.5.1.14
Enterprise integration and interoperability in manufacturing systems: Trends and issues, Computers in Industry, vol.59, issue.7, pp.641-646, 2008. ,
DOI : 10.1016/j.compind.2007.12.010
URL : https://hal.archives-ouvertes.fr/hal-00259678
Rough sets, International Journal of Computer & Information Sciences, vol.8, issue.3, pp.341-356, 1982. ,
DOI : 10.1007/BF01001956
Rough set approach to knowledge-based decision support, European Journal of Operational Research, vol.99, issue.1, pp.48-57, 1997. ,
DOI : 10.1016/S0377-2217(96)00382-7
Rough sets and intelligent data analysis, Information Sciences, vol.147, issue.1-4, pp.1-12, 2002. ,
DOI : 10.1016/S0020-0255(02)00197-4
URL : http://bcpw.bg.pw.edu.pl/Content/1932
Brazing footprints : Case studies in high-temperature brazing, 2003. ,
AUTM Licensing Survey : FY 1999, 2002. ,
Lessons learned about technology transfer, Technovation, vol.21, issue.4, pp.253-261, 2001. ,
DOI : 10.1016/S0166-4972(00)00039-0
Méthodologie multicritère d'aide à la décision, 1985. ,
Barriers to the strategic adoption of revolutionary manufacturing processes, The Journal of Technology Transfer, vol.18, issue.3, pp.59-66, 1998. ,
DOI : 10.2307/41165082
Alternative conceptions of technology, Research Policy, vol.10, issue.1, pp.2-24, 1981. ,
DOI : 10.1016/0048-7333(81)90008-1
The form of technology The Transfer and Utilization of Technical Knowledge, pp.125-139, 1982. ,
Introduction to brazing and soldering, Welding, Brasing, and soldring ASM HAND BOOK, pp.270-481, 1993. ,
The development and application of interactive models of industrial technology transfer, pp.45-53, 1993. ,
New brazing processes using anneal-resistant copper and brass alloys, Materials & Design, vol.25, issue.1, pp.83-89, 2004. ,
DOI : 10.1016/S0261-3069(03)00162-6
Evaluation of technology transfer by peer review, The Journal of Technology Transfer, vol.19, issue.3-4, pp.3-4, 1994. ,
DOI : 10.1007/BF02371611
Organizational issues in university-industry technology transfer: An overview of the symposium issue, The Journal of Technology Transfer, vol.26, issue.1/2, pp.5-11, 2001. ,
DOI : 10.1023/A:1007823925996
Assessing the impact of organizational practices on the relative productivity of university technology transfer offices: an exploratory study, Research Policy, vol.32, issue.1, pp.27-48, 2003. ,
DOI : 10.1016/S0048-7333(01)00196-2
Application of the rough set approach to evaluation of bankruptcy risk. Intelligent Systems in Accounting, Finance and Management, vol.4, issue.1, pp.27-41, 1995. ,
A guide to the best technology-transfer practices, The Journal of Technology Transfer, vol.32, issue.Number 2, pp.5-16, 1990. ,
DOI : 10.1007/BF02377652
Intégration de la dimension VisioGraphique dans les phases amont du processus de conception de produits mécaniques pour favoriser la coopération et la construction commune de projet, 2004. ,
The Process of Knowledge Transfer: A Diachronic Analysis of Stickiness, Organizational Behavior and Human Decision Processes, vol.82, issue.1, pp.9-27, 2000. ,
DOI : 10.1006/obhd.2000.2884
A Model of the Diffusion of Technology into SMEs. WEI Working paper series. Welsh Enterprise Institute University of Glamorgan Business School (online), 2000. ,
Co-Ordination Between Product and Process Definitions in a Concurrent Engineering Environment, CIRP Annals, vol.49, issue.1, pp.75-78, 2000. ,
DOI : 10.1016/S0007-8506(07)62899-6
Inward technology transfer as an interactive process, Technovation, vol.15, issue.1, pp.25-43, 1995. ,
DOI : 10.1016/0166-4972(95)96609-W
Absorptive capacity: Enhancing the assimilation of time-based manufacturing practices, Journal of Operations Management, vol.24, issue.5, pp.692-710, 2006. ,
DOI : 10.1016/j.jom.2005.05.004
Processing effects in aluminum micro-channel tube for brazed R744 heat exchangers, Journal of Materials Processing Technology, vol.191, issue.1-3, pp.1-3, 2007. ,
DOI : 10.1016/j.jmatprotec.2007.03.040
Evaluating prediction of technology transfer success: An interim evaluation of the dutch sensor technology program, The Journal of Technology Transfer, vol.1, issue.1, pp.53-58, 1997. ,
DOI : 10.1093/rev/1.1.3
Enterprise Modelling and Integration, 1996. ,
DOI : 10.1007/978-0-387-35621-1_4
Dynamique d'innovation et de conception et rôle des objets intermédiaires. Ecole d'été du GDR TIC et société "Les Supports de la Connaissance: Technologies, 2006. ,
Coordination par les objets dans les processus de conception, pp.289-295, 1996. ,
URL : https://hal.archives-ouvertes.fr/hal-00134434
Modeling the international technology transfer process in construction projects: evidence from Thailand, The Journal of Technology Transfer, vol.42, issue.6, pp.667-687, 2008. ,
DOI : 10.1080/014461998372024
Creating a Technology-Based Entrepreneurial Economy: A Resource Based Theory Perspective, The Journal of Technology Transfer, vol.24, issue.10, pp.433-451, 2005. ,
DOI : 10.2307/41166664
Bureaucracy, innovation and appropriability. ESRC Industrial Economics Study Group Conference, 1991. ,
Rough set approach for accident chains exploration, Accident Analysis & Prevention, vol.39, issue.3, pp.629-637, 2007. ,
DOI : 10.1016/j.aap.2006.10.009
La conception industrielle de produits ingénierie de l'évaluation et de la décision, 2008. ,
Fabrication of automotive heat exchanger using kinetic spraying process, Surface and Coatings Technology, vol.201, issue.24, pp.9524-9532, 2007. ,
DOI : 10.1016/j.surfcoat.2007.04.026
Absorptive capacity: A review, reconceptualization, and extension, Academy of Management Review, vol.27, issue.2, pp.185-203, 2002. ,
Feature extraction using rough set theory and genetic algorithms???an application for the simplification of product quality evaluation, Computers & Industrial Engineering, vol.43, issue.4, pp.661-676, 2002. ,
DOI : 10.1016/S0360-8352(02)00131-6
Toward meta research on technology transfer, IEEE Transactions on Engineering Management, vol.39, issue.1, pp.13-21, 1992. ,
DOI : 10.1109/17.119659