L. L. Augsburger, M. K. Vuppala, and P. Holm, Handbook of Pharmaceutical Granulation, 1997.

C. G. Barlow, Granulation of powders, Chemical Engineering, 1968.

G. Betz, P. J. Bürgin, and H. Leuenberger, Power consumption profile analysis and tensile strength measurements during moist agglomeration, International Journal of Pharmaceutics, vol.252, issue.1-2, pp.11-25, 2003.
DOI : 10.1016/S0378-5173(02)00601-4

H. P. Bier, H. Leuenberger, and H. Sucker, Determination of uncritical quantity of granulating liquid by power measurements on planetary mixers; Pharmaceutical Industry, pp.375-380, 1979.

O. E. Cassidy and W. I. Thomas, Characterisation of wet masses using a powder rheometer, Given at the British Pharmaceutical Conference, 2002.

R. Chatlapalli and B. D. Rohera, Rheological characterization of diltiazem HCl/cellulose wet masses using a mixer torque rheometer, International Journal of Pharmaceutics, vol.175, issue.1, pp.47-59, 1998.
DOI : 10.1016/S0378-5173(98)00244-0

M. J. Cliff and M. D. Parker, Scale-up of mixer granulators, Proceeding of the 12 th interphex conference, pp.17-22, 1990.

V. Corvari, W. C. Fry, W. L. Seibert, and L. Augsburger, Instrumentation of a high-shear mixer : evaluation and comparison of a new capacitive sensor, a watt meter, and a strain-gage torque sensor for wet granulation monitoring, Pharmaceutical Research, vol.09, issue.12, pp.1525-1533, 1992.
DOI : 10.1023/A:1015843820526

M. J. Crooks and H. W. Schade, Fluidized bed granulation of a microdose pharmaceutical powder, Powder Technology, vol.19, issue.1, pp.103-108, 1978.
DOI : 10.1016/0032-5910(78)80077-1

M. Denesuk, G. L. Smith, B. J. Zelinski, N. J. Kreidl, and D. R. Uhlmann, Capillary Penetration of Liquid Droplets into Porous Materials, Journal of Colloid and Interface Science, vol.158, issue.1, pp.114-120, 1993.
DOI : 10.1006/jcis.1993.1235

J. M. Douillard and V. Médout-marère, A New Interpretation of Contact Angle Variations in View of a Recent Analysis of Immersion Calorimetry, Journal of Colloid and Interface Science, vol.223, issue.2, pp.255-260, 2000.
DOI : 10.1006/jcis.1999.6679

B. J. Ennis, J. Li, G. I. Tardos, and R. Pfeffer, The influence of viscosity on the strength of an axially strained pendular liquid bridge, Chemical Engineering Science, vol.45, issue.10, pp.3071-3088, 1990.
DOI : 10.1016/0009-2509(90)80054-I

B. J. Ennis and J. D. Litster, Particle size enlargement, Perry's Chemical Engineers' Handbook, pp.20-56, 1997.

B. J. Ennis, G. Tardos, and R. Pfeffer, A microlevel-based characterization of granulation phenomena, Powder Technology, vol.65, issue.1-3, pp.257-272, 1991.
DOI : 10.1016/0032-5910(91)80189-P

A. Faure, I. M. Grimsey, R. C. Rowe, P. York, and M. J. Cliff, A Methodology for the Optimization of Wet Granulation in a Model Planetary Mixer, Pharmaceutical Development and Technology, vol.12, issue.5, pp.413-422, 1998.
DOI : 10.1002/ppsc.19950120505

A. Faure, I. M. Grimsey, R. C. Rowe, P. York, and M. J. Cliff, Applicability of a scale-up methodology for wet granulation processes in Collette Gral high shear mixer-granulators, European Journal of Pharmaceutical Sciences, vol.8, issue.2, pp.85-93, 1999.
DOI : 10.1016/S0928-0987(98)00063-3

A. Faure, P. York, and R. C. Rowe, Process control and scale-up of pharmaceutical wet granulation processes: a review, European Journal of Pharmaceutics and Biopharmaceutics, vol.52, issue.3, pp.269-277, 2001.
DOI : 10.1016/S0939-6411(01)00184-9

G. C. Cole, Powder characteristics for capsule filling, In Hard capsules ? Development & Technology ? Ridgeway Ed, pp.80-86, 1987.

R. Freeman, The Importance of Air Content on the Rheology of Powders -an Empirical Study using the FT4 Powder Rheometer, Particulate Systems Analysis, 2003.

R. Freeman, The Flowability of Wet and Dry Powders, 20th Pharmaceutical Technology Conference, 2001.

T. Gluba, The effect of wetting liquid droplet size on the growth of agglomerates during wet drum granulation, Powder Technology, vol.130, issue.1-3, pp.219-224, 2003.
DOI : 10.1016/S0032-5910(02)00269-3

B. C. Hancock, P. York, and R. C. Rowe, Characterization of wet masses using a mixer torque rheometer: 2. Mixing kinetics, International Journal of Pharmaceutics, vol.83, issue.1-3, pp.147-153, 1992.
DOI : 10.1016/0378-5173(82)90017-5

K. P. Hapgood, J. D. Litster, and R. Smith, Nucleation regime map for liquid bound granules, AIChE Journal, vol.45, issue.2, pp.350-361, 2003.
DOI : 10.1248/cpb.45.710

S. M. Iveson and J. D. Litster, Fundamental studies of granule consolidation part 2: Quantifying the effects of particle and binder properties, Powder Technology, vol.99, issue.3, pp.243-250, 1998.
DOI : 10.1016/S0032-5910(98)00116-8

S. M. Iveson and J. D. Litster, Growth regime map for liquid-bound granules, AIChE Journal, vol.43, issue.7, pp.1510-1518, 1998.
DOI : 10.1248/cpb.43.1217

S. M. Iveson, J. D. Litster, and B. J. Ennis, Fundamental studies of granule consolidation Part 1: Effects of binder content and binder viscosity, Powder Technology, vol.88, issue.1, pp.15-20, 1996.
DOI : 10.1016/0032-5910(96)03096-3

S. M. Iveson, J. D. Litster, K. Hapgood, and B. J. Ennis, Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review, Powder Technology, vol.117, issue.1-2, pp.3-39, 2001.
DOI : 10.1016/S0032-5910(01)00313-8

V. Janin, M. D. Parker, and R. C. Rowe, Monitoring production scale granulation processes using an instrumented mixer torque rheometer, S.T.P. Pharm, vol.6, issue.4, pp.233-237, 1990.

D. Kay and P. C. Record, Automatic wet granulation end-point control system; Manufacturing chemist & aerosol news, pp.45-46, 1978.

M. Kopcha, E. Roland, G. Bubb, and W. Vadino, Monitoring the granulation process in a high shear mixer/granulator: An evaluation of three approaches to instrumentation, Drug Development and Industrial Pharmacy, vol.27, issue.9, 1945.
DOI : 10.3109/03639048409064652

P. C. Knight, An investigation of the kinetics of granulation using a high shear mixer, Powder Technology, vol.77, issue.2, pp.159-169, 1993.
DOI : 10.1016/0032-5910(93)80053-D

P. C. Knight, T. Instone, J. M. Pearson, and M. J. Hounslow, An investigation into the kinetics of liquid distribution and growth in high shear mixer agglomeration, Powder Technology, vol.97, issue.3, pp.246-257, 1998.
DOI : 10.1016/S0032-5910(98)00031-X

P. C. Knight, A. Johansen, H. G. Kristensen, T. Schaefer, and J. P. Seville, An investigation of the effects on agglomeration of changing the speed of a mechanical mixer, Powder Technology, vol.110, issue.3, pp.204-209, 2000.
DOI : 10.1016/S0032-5910(99)00259-4

H. G. Kristensen, P. Holm, and T. Schaefer, Mechanical properties of moist agglomerates in relation to granulation mechanisms part II. Effects of particle size distribution, Powder Technology, vol.44, issue.3, pp.239-247, 1985.
DOI : 10.1016/0032-5910(85)85005-1

M. Landin, R. C. Rowe, and P. York, Characterization of Wet Powder Masses with a Mixer Torque Rheometer. 3. Nonlinear Effects of Shaft Speed and Sample Weight, Journal of Pharmaceutical Sciences, vol.84, issue.5, pp.557-560, 1995.
DOI : 10.1002/jps.2600840508

M. Landin, P. York, M. J. Cliff, and R. C. Rowe, Scaleup of a Pharmaceutical Granulation in Planetary Mixers, Pharmaceutical Development and Technology, vol.14, issue.10, pp.145-150, 1999.
DOI : 10.3109/03639048809151939

M. Landin, P. York, M. J. Cliff, R. C. Rowe, and A. J. Wigmore, Scale-up of a pharmaceutical granulation in fixed bowl mixer-granulators, International Journal of Pharmaceutics, vol.133, issue.1-2, pp.127-131, 1996.
DOI : 10.1016/0378-5173(95)04427-2

M. Landin, P. York, M. J. Cliff, R. C. Rowe, and A. J. Wigmore, The effect of batch size on scale-up of a pharmaceutical granulation in a fixed bowl mixer granulator, International Journal of Pharmaceutics, vol.134, issue.1-2, pp.243-246, 1996.
DOI : 10.1016/0378-5173(96)04461-4

G. Lian, C. Thornton, and M. J. Adams, Discrete particle simulation of agglomerate impact coalescence, Chemical Engineering Science, vol.53, issue.19, pp.3381-3391, 1998.
DOI : 10.1016/S0009-2509(98)00152-3

N. O. Lindberg, A review on pharmaceutical wet-granulation, Drug Development and Industrial Pharmacy, pp.803-872, 1984.

N. O. Lindberg, L. Wenngren, and L. Leander, Studies on granulation in a change can mixer, Acta Pharmaceutica Suecica, vol.11, issue.6, pp.603-620, 1974.

J. D. Litster, Scaleup of wet granulation processes: science not art, Powder Technology, vol.130, issue.1-3, pp.35-40, 2003.
DOI : 10.1016/S0032-5910(02)00222-X

J. D. Litster, K. P. Hapgood, J. N. Michaels, A. Sims, M. Roberts et al., Liquid distribution in wet granulation: dimensionless spray flux, Powder Technology, vol.114, issue.1-3, pp.32-39, 2001.
DOI : 10.1016/S0032-5910(00)00259-X

H. Leuenberger, New trends in the production of pharmaceutical granules: the classical batch concept and the problem of scale-up, European Journal of Pharmaceutics and Biopharmaceutics, vol.52, issue.3, pp.279-288, 2001.
DOI : 10.1016/S0939-6411(01)00200-4

H. Leuenberger, Granulation, new techniques, Pharmaceutica Acta Helvetiae, vol.57, issue.3, pp.73-82, 1982.

H. Leuenberger, Scale-up of granulation processes with reference to process monitoring, Acta Pharamceutical Technology, vol.29, pp.274-280, 1982.

H. Leuenberger, H. P. Bier, and H. B. Sucker, Theory of granulating-liquid requirement in the conventionnal granulation process, Pharm. Technol, vol.3, pp.61-68, 1979.

H. Leuenberger, B. Luy, and J. Studer, New development in the control of a moist agglomeration an pelletization process, S. T. P. Pharmaceutical Sciences, vol.6, issue.5, pp.303-309, 1990.

H. Leuenberger, M. Usteri, G. Imanidis, and S. Winzap, Monitoring the granulation process: granulate growth, fractal dimensionality and percolation threshold, Bollettino Chimico Farmaceutico, vol.128, pp.54-61, 1989.

P. Luukonen, T. Schaefer, L. Hellen, A. M. Juppo, and J. Yliruusi, Rheological characterization of microcrystalline cellulose and silicified microcrystalline cellulose wet masses using a mixer torque rheometer, International Journal of Pharmaceutics, vol.188, issue.2, pp.181-192, 1999.
DOI : 10.1016/S0378-5173(99)00219-7

N. Midoux, Mécanique et rhéologie des fluides en génie chimique, 1993.

P. J. Mills, J. P. Seville, P. C. Knight, and M. J. Adams, The effect of binder viscosity on particle agglomeration in a low shear mixer/agglomerator, Powder Technology, vol.113, issue.1-2, pp.140-147, 2000.
DOI : 10.1016/S0032-5910(00)00224-2

D. M. Newitt and J. M. Conway-jones, A contribution to the theory and practice of granulation, Trans. I. Chem. Eng, vol.36, pp.422-441, 1958.

D. Oulahna, Wet granulation: the effect of shear on granule properties, Powder Technology, vol.130, issue.1-3, pp.238-246, 2003.
DOI : 10.1016/S0032-5910(02)00272-3

URL : https://hal.archives-ouvertes.fr/hal-01593344

M. D. Parker and R. C. Rowe, Rheological characterization of wet powder masses, Journal of Pharmacy and Pharmacology, vol.41, p.31, 1989.

M. D. Parker and R. C. Rowe, Source variation in the wet massing (granulation) of some microcrystalline celluloses, Powder Technology, vol.65, issue.1-3, pp.273-281, 1991.
DOI : 10.1016/0032-5910(91)80190-T

M. D. Parker, R. C. Rowe, and N. G. Upjohn, Mixer torque rheometry : a method to quantifying the consistency of wet granulations, Pharmaceutical Technology International, vol.2, issue.8, pp.50-64, 1990.

M. D. Parker, P. York, and R. C. Rowe, Use of granulation rheology in identifying interactions between microcrystalline cellulose and typical polymer binders, Journal of Pharmacy and Pharmacology, 1987.

J. M. Pearson, M. J. Hounslow, T. Instone, and P. C. Knight, Granulation kinetics: the confounding of particle size and age, World Congress on Particle Technology, p.86, 1998.

W. Piestch, An interdisciplinary approach to size enlargement by agglomeration, Powder Technology, vol.130, issue.1-3, pp.8-13, 2003.

O. Planin, R. Pi-ek, A. Trojak, and S. Sr-i, The utilization of surface free-energy parameters for the selection of a suitable binder in fluidized bed granulation, International Journal of Pharmaceutics, vol.207, issue.1-2, pp.77-88, 2000.
DOI : 10.1016/S0378-5173(00)00535-4

O. Planin, A. Trojak, and S. Sr, The dispersive component of the surface free energy of powders assessed using inverse gas chromatography and contact angle measurements, International Journal of Pharmaceutics, vol.221, issue.1-2, pp.211-217, 2001.
DOI : 10.1016/S0378-5173(01)00687-1

M. Landin, R. C. Rowe, and P. York, Characterization of Wet Powder Masses with a Mixer Torque Rheometer. 3. Nonlinear Effects of Shaft Speed and Sample Weight, Journal of Pharmaceutical Sciences, vol.84, issue.5, pp.557-560, 1995.
DOI : 10.1002/jps.2600840508

R. Plank, B. Diehl, H. Grinstead, and J. Zega, Quantifying liquid coverage and powder flux in high-shear granulators, Powder Technology, vol.134, issue.3, pp.223-234, 2003.
DOI : 10.1016/S0032-5910(03)00171-2

F. Podczeck, Rheological studies of the physical properties of powders used in capsule filling, Part 1, Pharmaceutical Technology Europe, vol.11, issue.9, pp.16-24, 1999.

F. Podczeck, Rheological studies of the physical properties of powders used in capsule filling, pp.34-42, 1999.

J. Rantanen, S. Lehtola, P. Rämet, J. P. Mannermaa, and J. Yliruusi, On-line monitoring of moisture content in an instrumented fluidized bed granulator with a multi-channel NIR moisture sensor, Powder Technology, vol.99, issue.2, pp.163-170, 1998.
DOI : 10.1016/S0032-5910(98)00100-4

M. Ritala, P. Holm, T. Schaefer, and H. G. Kristensen, Influence of liquid bonding strength on power consumption during granulation in high shear mixer, Drug Development of Industrial Pharmacy, pp.1041-1060, 1988.

R. C. Rowe, Binder-substrate interactions in granulation: a theoretical approach based on surface free energy and polarity, International Journal of Pharmaceutics, vol.52, issue.2, pp.149-154, 1989.
DOI : 10.1016/0378-5173(89)90289-5

R. C. Rowe, Characterization of wet powder masses using a mixer torque rheometer. 4. Effect of blade orientation, International Journal of Pharmaceutics, vol.133, issue.1-2, pp.133-138, 1996.
DOI : 10.1016/0378-5173(95)04428-0

R. C. Rowe, Correlation between predicted binder spreading coefficients and measured granule and tablet properties in the granulation of paracetamol, International Journal of Pharmaceutics, vol.58, issue.3, pp.209-213, 1990.
DOI : 10.1016/0378-5173(90)90197-C

R. C. Rowe, Mixer torque rheometry ? Further Advances, Pharmaceutical Technology Europe, vol.8, pp.38-48, 1996.

R. C. Rowe, Polar/non-polar interactions in the granulation of organic substrates with polymer binding agents, International Journal of Pharmaceutics, vol.56, issue.2, pp.117-124, 1989.
DOI : 10.1016/0378-5173(89)90004-5

R. C. Rowe, Surface free energy and polarity effects in the granulation of a model system, International Journal of Pharmaceutics, vol.53, issue.1, pp.75-78, 1989.
DOI : 10.1016/0378-5173(89)90364-5

R. C. Rowe and M. D. Parker, Mixer torque rheometry?An update, Pharmaceutical Technology Europe, vol.6, pp.24-27, 1994.

R. C. Rowe and G. R. Sadeghnejad, The rheology of microcrystalline cellulose powder/water mixes ??? measurement using a mixer torque rheometer, International Journal of Pharmaceutics, vol.38, issue.1-3, pp.227-229, 1987.
DOI : 10.1016/0378-5173(87)90118-9

H. Rumpf, the strength of granules and agglomerates, Agglomeration, pp.379-414, 1962.

K. V. Sastry and D. W. Fuerstenau, Mechanisms of agglomerate growth in green pelletization, Powder Technology, vol.7, issue.2, pp.97-105, 1973.
DOI : 10.1016/0032-5910(73)80012-9

S. H. Schaafsama, P. Vonk, P. Segers, and N. W. Kossen, Description of agglomerate growth, Powder Technology, vol.97, issue.3, pp.183-190, 1998.
DOI : 10.1016/S0032-5910(97)03399-8

T. Schaefer and C. Mathiesen, Melt pelletization in a high shear mixer. VIII. Effects of binder viscosity, International Journal of Pharmaceutics, vol.139, issue.1-2, pp.125-138, 1996.
DOI : 10.1016/0378-5173(96)04549-8

T. Schaefer and C. Mathiesen, Melt pelletization in a high shear mixer. IX. Effects of binder particle size, International Journal of Pharmaceutics, vol.139, issue.1-2, pp.139-148, 1996.
DOI : 10.1016/0378-5173(96)04548-6

S. A. Schildcrout, Rheology of pharmaceutical granulations, Journal of Pharmacy and Pharmacology, vol.68, issue.7, pp.502-505, 1984.
DOI : 10.1002/jps.2600680716

M. S. Spring, The conductivity of the damp mass during the massing stage of the granulation process, Drug Development and Industrial Pharmacy, vol.41, issue.3, pp.1507-1512, 1983.
DOI : 10.3109/03639048209042702

J. N. Staniforth and Q. S. , Granulation monitoring in a planetary mixer using a probe vibration analysis technique, International Journal of Pharmaceutics, vol.32, issue.2-3, pp.177-185, 1986.
DOI : 10.1016/0378-5173(86)90177-8

I. Talu, G. I. Tardos, and J. R. Van-ommen, Use of stress fluctuations to monitor wet granulation of powders, Powder Technology, vol.117, issue.1-2, pp.149-162, 2001.
DOI : 10.1016/S0032-5910(01)00321-7

K. Terashita, S. Watano, and K. Miyanami, Determination of end-point by frequency analysis of power consumption in agitation granulation., CHEMICAL & PHARMACEUTICAL BULLETIN, vol.38, issue.11, pp.3120-3123, 1990.
DOI : 10.1248/cpb.38.3120

R. J. Timko, J. L. Johnson, G. W. Skinner, S. T. Chen, and H. A. Rosenberg, Instrumentation of a Vertical High Shear Mixer with a Motor Slip Monitoring Device, Drug Development and Industrial Pharmacy, vol.48, issue.10, pp.12-1375, 1986.
DOI : 10.1002/jps.2600730339

D. N. Travers, A. G. Rogerson, and T. M. Jones, A torque arm mixer for studying wet massing, Journal of. Pharmacy and Pharmacology, vol.27, p.3, 1975.

P. Vonk, C. G. Ramaker, J. S. Vromans, H. Kossen, and N. W. , Growth mechanisms of high-shear pelletisation, International Journal of Pharmaceutics, vol.157, issue.1, pp.93-102, 1997.
DOI : 10.1016/S0378-5173(97)00232-9

A. Wade and P. J. Weller, Handbook of pharmaceutical excipients, American Pharmaceutical Association, 1994.

L. S. Wan, P. W. Heng, and C. V. Liew, The influence of liquid spray rate and atomizing pressure on the size of spray droplets and spheroids, International Journal of Pharmaceutics, vol.118, issue.2, pp.213-219, 1995.
DOI : 10.1016/0378-5173(94)00363-A

J. Warren and J. Price, Drug Migration during Drying of Tablet Granulations II: Effect of Binder Solution Viscosity and Drying Temperature, Journal of Pharmaceutical Sciences, vol.66, issue.10, pp.1409-1412, 1977.
DOI : 10.1002/jps.2600661015

S. Watano, Direct control of wet granulation processes by image processing system, Powder Technology, vol.117, issue.1-2, pp.163-172, 2001.
DOI : 10.1016/S0032-5910(01)00322-9

S. Watano and K. Miyanami, Image processing for on-line monitoring of granule size distribution and shape in fluidized bed granulation, Powder Technology, vol.83, issue.1, pp.55-60, 1995.
DOI : 10.1016/0032-5910(94)02944-J

S. Watano, T. Numa, I. Koizumi, and Y. Osako, Feedback control in high shear granulation of pharmaceutical powders, European Journal of Pharmaceutics and Biopharmaceutics, vol.52, issue.3, pp.337-345, 2001.
DOI : 10.1016/S0939-6411(01)00182-5

S. Watano, T. Numa, K. Miyanami, and Y. Osako, A fuzzy control system of high shear granulation using image processing, Powder Technology, vol.115, issue.2, pp.124-130, 2001.
DOI : 10.1016/S0032-5910(00)00332-6

P. York and R. C. Rowe, Monitoring granulation size enlargement processes using mixer torque rheometry, 1994.

D. Zhang, J. H. Flory, S. Panmai, U. Batra, and M. J. Kaufman, Wettability of pharmaceutical solids: its measurement and influence on wet granulation, Physicochemical and Engineering Aspects, pp.547-554, 2002.

J. D. Lister, Scaleup of wet granulation processes: science not art, Powder Technology, vol.130, issue.1-3, pp.35-40, 2003.
DOI : 10.1016/S0032-5910(02)00222-X

L. L. Augsburger, M. K. Vuppala, and P. Holm, Handbook of Pharmaceutical Granulation, 1997.

S. M. Iveson, J. D. Litster, K. Hapgood, and B. J. Ennis, Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review, Powder Technology, vol.117, issue.1-2, pp.3-39, 2001.
DOI : 10.1016/S0032-5910(01)00313-8

H. Rumpf, the strength of granules and agglomerates, Agglomeration, pp.379-414, 1962.

W. Piestch, An interdisciplinary approach to size enlargement by agglomeration, Powder Technology, vol.130, issue.1-3, pp.8-13, 2003.

C. G. Barlow, Granulation of powders, Chemical Engineering, 1968.

D. M. Newitt, J. M. Conway, and -. , A contribution to the theory and practice of granulation, Trans. I. Chem. Eng, vol.36, pp.422-441, 1958.

K. V. Sastry and D. W. Fuerstenau, Mechanisms of agglomerate growth in green pelletization, Powder Technology, vol.7, issue.2, pp.97-105, 1973.
DOI : 10.1016/0032-5910(73)80012-9

P. C. Knight, An investigation of the kinetics of granulation using a high shear mixer, Powder Technology, vol.77, issue.2, pp.159-169, 1993.
DOI : 10.1016/0032-5910(93)80053-D

B. J. Ennis and J. D. Litster, Particle size enlargement, Perry's Chemical Engineers' Handbook, pp.20-56, 1997.

O. Planin-ek, R. Pi-ek, A. Trojak, and S. Sr-i, The utilization of surface free-energy parameters for the selection of a suitable binder in fluidized bed granulation, International Journal of Pharmaceutics, vol.207, issue.1-2, pp.77-88, 2000.
DOI : 10.1016/S0378-5173(00)00535-4

J. M. Douillard and V. Médout-marère, A New Interpretation of Contact Angle Variations in View of a Recent Analysis of Immersion Calorimetry, Journal of Colloid and Interface Science, vol.223, issue.2, pp.255-260, 2000.
DOI : 10.1006/jcis.1999.6679

O. Planin-ek, A. Trojak, and S. Sr-i, The dispersive component of the surface free energy of powders assessed using inverse gas chromatography and contact angle measurements, International Journal of Pharmaceutics, vol.221, issue.1-2, pp.211-217, 2001.
DOI : 10.1016/S0378-5173(01)00687-1

D. Zhang, J. H. Flory, S. Panmai, U. Batra, and M. J. Kaufman, Wettability of pharmaceutical solids: its measurement and influence on wet granulation, Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol.206, issue.1-3, pp.547-554, 2002.
DOI : 10.1016/S0927-7757(02)00091-2

T. Schaefer and C. Mathiesen, Melt pelletization in a high shear mixer. IX. Effects of binder particle size, International Journal of Pharmaceutics, vol.139, issue.1-2, pp.139-148, 1996.
DOI : 10.1016/0378-5173(96)04548-6

T. Gluba, The effect of wetting liquid droplet size on the growth of agglomerates during wet drum granulation, Powder Technology, vol.130, issue.1-3, pp.219-224, 2003.
DOI : 10.1016/S0032-5910(02)00269-3

T. Schaefer and C. Mathiesen, Melt pelletization in a high shear mixer. VIII. Effects of binder viscosity, International Journal of Pharmaceutics, vol.139, issue.1-2, pp.125-138, 1996.
DOI : 10.1016/0378-5173(96)04549-8

M. Denesuk, G. L. Smith, B. J. Zelinski, N. J. Kreidl, and D. R. Uhlmann, Capillary Penetration of Liquid Droplets into Porous Materials, Journal of Colloid and Interface Science, vol.158, issue.1, pp.114-120, 1993.
DOI : 10.1006/jcis.1993.1235

P. J. Mills, J. P. Seville, P. C. Knight, and M. J. Adams, The effect of binder viscosity on particle agglomeration in a low shear mixer/agglomerator, Powder Technology, vol.113, issue.1-2, pp.140-147, 2000.
DOI : 10.1016/S0032-5910(00)00224-2

P. C. Knight, T. Instone, J. M. Pearson, and M. J. Hounslow, An investigation into the kinetics of liquid distribution and growth in high shear mixer agglomeration, Powder Technology, vol.97, issue.3, pp.246-257, 1998.
DOI : 10.1016/S0032-5910(98)00031-X

L. S. Wan, P. W. Heng, and C. V. Liew, The influence of liquid spray rate and atomizing pressure on the size of spray droplets and spheroids, International Journal of Pharmaceutics, vol.118, issue.2, pp.213-219, 1995.
DOI : 10.1016/0378-5173(94)00363-A

R. Plank, B. Diehl, H. Grinstead, and J. Zega, Quantifying liquid coverage and powder flux in high-shear granulators, Powder Technology, vol.134, issue.3, pp.223-234, 2003.
DOI : 10.1016/S0032-5910(03)00171-2

. Hsu, Liquid distribution in wet granulation: dimensionless spray flux, Powder Technology, vol.114, pp.32-39, 2001.

K. P. Hapgood, J. D. Litster, and R. Smith, Nucleation regime map for liquid bound granules, AIChE Journal, vol.45, issue.2, pp.350-361, 2003.
DOI : 10.1248/cpb.45.710

M. J. Crooks and H. W. Schade, Fluidized bed granulation of a microdose pharmaceutical powder, Powder Technology, vol.19, issue.1, pp.103-108, 1978.
DOI : 10.1016/0032-5910(78)80077-1

J. Warren and J. Price, Drug Migration during Drying of Tablet Granulations II: Effect of Binder Solution Viscosity and Drying Temperature, Journal of Pharmaceutical Sciences, vol.66, issue.10, pp.1409-1412, 1977.
DOI : 10.1002/jps.2600661015

B. J. Ennis, J. Li, G. I. Tardos, and R. Pfeffer, The influence of viscosity on the strength of an axially strained pendular liquid bridge, Chemical Engineering Science, vol.45, issue.10, pp.3071-3088, 1990.
DOI : 10.1016/0009-2509(90)80054-I

G. Lian, C. Thornton, and M. J. Adams, Discrete particle simulation of agglomerate impact coalescence, Chemical Engineering Science, vol.53, issue.19, pp.3381-3391, 1998.
DOI : 10.1016/S0009-2509(98)00152-3

S. M. Iveson and J. D. Litster, Fundamental studies of granule consolidation part 2: Quantifying the effects of particle and binder properties, Powder Technology, vol.99, issue.3, pp.243-250, 1998.
DOI : 10.1016/S0032-5910(98)00116-8

S. M. Iveson, J. D. Litster, and B. J. Ennis, Fundamental studies of granule consolidation Part 1: Effects of binder content and binder viscosity, Powder Technology, vol.88, issue.1, pp.15-20, 1996.
DOI : 10.1016/0032-5910(96)03096-3

B. J. Ennis, G. Tardos, and R. Pfeffer, A microlevel-based characterization of granulation phenomena, Powder Technology, vol.65, issue.1-3, pp.257-272, 1991.
DOI : 10.1016/0032-5910(91)80189-P

H. G. Kristensen, P. Holm, and T. Schaefer, Mechanical properties of moist agglomerates in relation to granulation mechanisms part II. Effects of particle size distribution, Powder Technology, vol.44, issue.3, pp.239-247, 1985.
DOI : 10.1016/0032-5910(85)85005-1

S. M. Iveson and J. D. Litster, Growth regime map for liquid-bound granules, AIChE Journal, vol.43, issue.7, pp.1510-1518, 1998.
DOI : 10.1248/cpb.43.1217

M. Ritala, P. Holm, T. Schaefer, and H. G. Kristensen, Influence of liquid bonding strength on power consumption during granulation in high shear mixer, Drug Development of Industrial Pharmacy, pp.1041-1060, 1988.

S. H. Schaafsama, P. Vonk, P. Segers, and N. W. Kossen, Description of agglomerate growth, Powder Technology, vol.97, issue.3, pp.183-190, 1998.
DOI : 10.1016/S0032-5910(97)03399-8

P. C. Knight, A. Johansen, H. G. Kristensen, T. Schaefer, and J. P. Seville, An investigation of the effects on agglomeration of changing the speed of a mechanical mixer, Powder Technology, vol.110, issue.3, pp.204-209, 2000.
DOI : 10.1016/S0032-5910(99)00259-4

D. Oulahna, Wet granulation: the effect of shear on granule properties, Powder Technology, vol.130, issue.1-3, pp.238-246, 2003.
DOI : 10.1016/S0032-5910(02)00272-3

URL : https://hal.archives-ouvertes.fr/hal-01593344

J. M. Pearson, M. J. Hounslow, T. Instone, and P. C. Knight, Granulation kinetics: the confounding of particle size and age, World Congress on Particle Technology, p.86, 1998.

P. Vonk, G. Cpf, J. S. Ramaker, H. Vromans, and N. W. Kossen, Growth mechanisms of high-shear pelletisation, International Journal of Pharmaceutics, vol.157, issue.1, pp.93-102, 1997.
DOI : 10.1016/S0378-5173(97)00232-9

N. O. Lindberg, L. Wenngren, and L. Leander, Studies on granulation in a change can mixer, Acta Pharmaceutical Suecica, vol.11, issue.6, pp.603-620, 1974.

N. O. Lindberg, A review on pharmaceutical wet-granulation, Drug Development and Industrial Pharmacy, pp.803-872, 1984.

H. P. Bier, H. Leuenberger, and H. , Sucker; Determination of uncritical quantity of granulating liquid by power measurements on planetary mixers; Pharmaceutical, Industry, vol.41, issue.4, pp.375-380, 1979.

H. Leuenberger, Granulation, new techniques, Pharmaceutica Acta Helvetiae, vol.57, issue.3, pp.73-82, 1982.

H. Leuenberger, Scale-up of granulation processes with reference to process monitoring, Acta Pharmaceutical Technology, vol.29, pp.274-280, 1982.

J. Staniforth and S. M. Quincey, Granulation monitoring in a planetary mixer using a probe vibration analysis technique, International Journal of Pharmaceutics, vol.32, issue.2-3, pp.177-185, 1986.
DOI : 10.1016/0378-5173(86)90177-8

M. S. Spring, The conductivity of the damp mass during the massing stage of the granulation process, Drug Development and Industrial Pharmacy, vol.41, issue.3, pp.1507-1512, 1983.
DOI : 10.3109/03639048209042702

J. Rantanen, S. Lehtola, P. Rämet, J. P. Mannermaa, and J. Yliruusi, On-line monitoring of moisture content in an instrumented fluidized bed granulator with a multi-channel NIR 257

S. Watano, Direct control of wet granulation processes by image processing system, Powder Technology, vol.117, issue.1-2, pp.163-172, 2001.
DOI : 10.1016/S0032-5910(01)00322-9

H. Leuenberger, New trends in the production of pharmaceutical granules: the classical batch concept and the problem of scale-up, European Journal of Pharmaceutics and Biopharmaceutics, vol.52, issue.3, pp.279-288, 2001.
DOI : 10.1016/S0939-6411(01)00200-4

H. Leuenberger, H. P. Bier, and H. B. , Sucker; Theory of granulating-liquid requirement in the conventional granulation process, Pharmaceutical Technology, vol.3, pp.61-68, 1979.

G. Betz, P. J. Bürgin, and . Leuenberger, Power consumption profile analysis and tensile strength measurements during moist agglomeration, International Journal of Pharmaceutics, vol.252, issue.1-2, pp.11-25, 2003.
DOI : 10.1016/S0378-5173(02)00601-4

H. Leuenberger, B. Luy, and J. Studer, New development in the control of a moist agglomeration and pelletization process, S. T. P. Pharmaceutical Science, vol.6, issue.5, pp.303-309, 1990.

H. Leuenberger, M. Usteri, G. Imanidis, and S. Winzap, Monitoring the granulation process: granulate growth, fractal dimensionality and percolation threshold, Boll. Chim. Farmaceutico, vol.128, pp.54-61, 1989.

V. Corvari, W. C. Fry, W. L. Seibert, and L. Augsburger, Instrumentation of a high-shear mixer : evaluation and comparison of a new capacitive sensor, a watt meter, and a strain-gage torque sensor for wet granulation monitoring, Pharmaceutical Research, vol.09, issue.12, pp.1525-1533, 1992.
DOI : 10.1023/A:1015843820526

D. N. Travers, A. G. Rogerson, and T. M. Jones, A torque arm mixer for studying wet massing, Journal of Pharmacy and Pharmacology, vol.27, p.3, 1975.

K. Terashita, S. Watano, and K. Miyanami, Determination of end-point by frequency analysis of power consumption in agitation granulation., CHEMICAL & PHARMACEUTICAL BULLETIN, vol.38, issue.11, pp.3120-3123, 1990.
DOI : 10.1248/cpb.38.3120

R. J. Timko, J. L. Johnson, G. W. Skinner, S. T. Chen, and H. A. Rosenberg, Instrumentation of a Vertical High Shear Mixer with a Motor Slip Monitoring Device, Drug Development and Industrial Pharmacy, vol.48, issue.10, pp.12-1375, 1986.
DOI : 10.1002/jps.2600730339

D. Kay and P. C. Record, Automatic wet granulation end-point control system; Manufacturing chemist & aerosol news, pp.45-46, 1978.

I. Talu, G. I. Tardos, and J. R. Van-ommen, Use of stress fluctuations to monitor wet granulation of powders, Powder Technology, vol.117, issue.1-2, pp.149-162, 2001.
DOI : 10.1016/S0032-5910(01)00321-7

M. Kopcha, E. Roland, G. Bubb, and W. , A. Vadino; Monitoring the granulation process in a high shear mixer / granulator : an evaluation of three approaches to instrumentation, Drug Development and Industrial Pharmacy, vol.18, issue.18, 1945.

S. Watano and K. Miyanami, Image processing for on-line monitoring of granule size distribution and shape in fluidized bed granulation, Powder Technology, vol.83, issue.1, pp.55-60, 1995.
DOI : 10.1016/0032-5910(94)02944-J

S. Watano, T. Numa, K. Miyanami, and Y. Osako, A fuzzy control system of high shear granulation using image processing, Powder Technology, vol.115, issue.2, pp.124-130, 2001.
DOI : 10.1016/S0032-5910(00)00332-6

A. Faure, P. York, and R. C. Rowe, Process control and scale-up of pharmaceutical wet granulation processes: a review, European Journal of Pharmaceutics and Biopharmaceutics, vol.52, issue.3, pp.269-277, 2001.
DOI : 10.1016/S0939-6411(01)00184-9

N. Midoux, Mécanique et rhéologie des fluides en génie chimique, 1993.

M. J. Cliff and M. D. Parker, Scale-up of mixer granulators, Proceeding of the 12 th interphex conference, pp.17-22, 1990.

M. P. Landin, . M. York, . R. Cliff, A. J. Rowe, and . Wigmore, Scale-up of a pharmaceutical granulation in fixed bowl mixer-granulators, International Journal of Pharmaceutics, vol.133, issue.1-2, pp.127-131, 1996.
DOI : 10.1016/0378-5173(95)04427-2

R. C. Rowe and M. D. Parker, Mixer torque rheometry?An update, Pharmaceutical Technology Europe, vol.6, pp.24-27, 1994.

A. Faure, I. M. Grimsey, R. C. Rowe, P. York, and M. J. Cliff, A Methodology for the Optimization of Wet Granulation in a Model Planetary Mixer, Pharmaceutical Development and Technology, vol.12, issue.5, pp.413-422, 1998.
DOI : 10.1002/ppsc.19950120505

M. P. Landin, . M. York, . R. Cliff, A. J. Rowe, and . Wigmore, The effect of batch size on scale-up of a pharmaceutical granulation in a fixed bowl mixer granulator, International Journal of Pharmaceutics, vol.134, issue.1-2, pp.243-246, 1996.
DOI : 10.1016/0378-5173(96)04461-4

A. I. Faure, . R. Grimsey, . P. Rowe, M. J. York, and . Cliff, Applicability of a scale-up methodology for wet granulation processes in Collette Gral high shear mixer-granulators, European Journal of Pharmaceutical Sciences, vol.8, issue.2, pp.85-93, 1999.
DOI : 10.1016/S0928-0987(98)00063-3

S. A. Schildcrout, Rheology of pharmaceutical granulations, Journal of Pharmacy and Pharmacology, vol.68, issue.7, pp.502-505, 1984.
DOI : 10.1002/jps.2600680716

R. C. Rowe and G. R. Sadeghnejad, The rheology of microcrystalline cellulose powder/water mixes ??? measurement using a mixer torque rheometer, International Journal of Pharmaceutics, vol.38, issue.1-3, pp.227-229, 1987.
DOI : 10.1016/0378-5173(87)90118-9

M. D. Parker, P. York, and R. C. Rowe, Use of granulation rheology in identifying interactions between microcrystalline cellulose and typical polymer binders, Journal of Pharmacy and Pharmacology, 1987.

M. D. Parker and R. C. Rowe, Rheological characterization of wet powder masses, Journal of Pharmacy and Pharmacology, vol.41, p.31, 1989.

M. D. Parker and R. C. Rowe, Source variation in the wet massing (granulation) of some microcrystalline celluloses, Powder Technology, vol.65, issue.1-3, pp.273-281, 1991.
DOI : 10.1016/0032-5910(91)80190-T

V. Janin, M. D. Parker, and R. C. Rowe, Monitoring production scale granulation processes using an instrumented mixer torque rheometer, S.T.P. Pharma, vol.6, issue.4, pp.233-237, 1990.

R. C. Rowe, Mixer torque rheometry ? Further Advances, Pharmaceutical Technology Europe, vol.8, pp.38-48, 1996.

R. C. Landin, P. Rowe, and . York, Characterization of Wet Powder Masses with a Mixer Torque Rheometer. 3. Nonlinear Effects of Shaft Speed and Sample Weight, Journal of Pharmaceutical Sciences, vol.84, issue.5, pp.557-560, 1995.
DOI : 10.1002/jps.2600840508

R. Chatlapalli and B. D. Rohera, Rheological characterization of diltiazem HCl/cellulose wet masses using a mixer torque rheometer, International Journal of Pharmaceutics, vol.175, issue.1, pp.47-59, 1998.
DOI : 10.1016/S0378-5173(98)00244-0

M. D. Parker, R. C. Rowe, and N. G. Upjohn, Mixer torque rheometry : a method to quantifying the consistency of wet granulations, Pharmaceutical Technology International, vol.2, issue.8, pp.50-64, 1990.

P. Luukonen, T. Schaefer, L. Hellen, A. M. Juppo, and J. Yliruusi, Rheological characterization of microcrystalline cellulose and silicified microcrystalline cellulose wet masses using a mixer torque rheometer, International Journal of Pharmaceutics, vol.188, issue.2, pp.181-192, 1999.
DOI : 10.1016/S0378-5173(99)00219-7

C. Hancock, P. York, and R. C. Rowe, Characterization of wet masses using a mixer torque rheometer: 2. Mixing kinetics, International Journal of Pharmaceutics, vol.83, issue.1-3, pp.147-153, 1992.
DOI : 10.1016/0378-5173(82)90017-5

G. C. Cole, Powder characteristics for capsule filling, In Hard capsules ? Development & Technology ? Ridgeway Ed, pp.80-86, 1987.

R. Freeman, The Importance of Air Content on the Rheology of Powders -an Empirical Study using the FT4 Powder Rheometer, Particulate Systems Analysis, 2003.

F. Podczeck, Rheological studies of the physical properties of powders used in capsule filling, part 1, Pharmaceutical Technolology Europe, vol.11, issue.9, pp.16-24, 1999.

. Podczeck, Rheological studies of the physical properties of powders used in capsule filling, Pharmaceutical Technolology Europe, vol.11, issue.210, pp.34-42, 1999.

R. Freeman, The Flowability of Wet and Dry Powders, 20th Pharmaceutical Technology Conference, 2001.

O. E. Cassidy and W. I. Thomas, Characterisation of wet masses using a powder rheometer, Given at the British Pharmaceutical Conference, 2002.

M. Landin, P. York, M. J. Cliff, and R. C. Rowe, Scaleup of a Pharmaceutical Granulation in Planetary Mixers, Pharmaceutical Development and Technology, vol.14, issue.10, pp.145-150, 1999.
DOI : 10.3109/03639048809151939

A. Wade and P. J. Weller, Handbook of pharmaceutical excipients, American Pharmaceutical Association, 1994.

R. C. Rowe, Binder-substrate interactions in granulation: a theoretical approach based on surface free energy and polarity, International Journal of Pharmaceutics, vol.52, issue.2, pp.149-154, 1989.
DOI : 10.1016/0378-5173(89)90289-5

R. C. Rowe, Surface free energy and polarity effects in the granulation of a model system, International Journal of Pharmaceutics, vol.53, issue.1, pp.75-78, 1989.
DOI : 10.1016/0378-5173(89)90364-5

R. C. Rowe, Polar/non-polar interactions in the granulation of organic substrates with polymer binding agents, International Journal of Pharmaceutics, vol.56, issue.2, pp.117-124, 1989.
DOI : 10.1016/0378-5173(89)90004-5

R. C. Rowe, Correlation between predicted binder spreading coefficients and measured granule and tablet properties in the granulation of paracetamol, International Journal of Pharmaceutics, vol.58, issue.3, pp.209-213, 1990.
DOI : 10.1016/0378-5173(90)90197-C

R. C. Rowe, Characterization of wet powder masses using a mixer torque rheometer. 4. Effect of blade orientation, International Journal of Pharmaceutics, vol.133, issue.1-2, pp.133-138, 1996.
DOI : 10.1016/0378-5173(95)04428-0