B. Agostini and A. Et-bontemps, Vertical flow boiling of refrigerant R134a in small channels, International Journal of Heat and Fluid Flow, vol.26, issue.2, pp.296-306, 2005.
DOI : 10.1016/j.ijheatfluidflow.2004.08.003

URL : https://hal.archives-ouvertes.fr/hal-00184231

S. Y. Ahmed and R. Et-kaparthi, Heat transfer studies of falling film heat exchangers, Indian Journal of Technology, vol.1, pp.377-381, 1963.

A. Alhusseini, . Tuzla, and J. Chen, Falling film evaporation of single component liquids, International Journal of Heat and Mass Transfer, vol.41, issue.12, pp.1623-1632, 1998.
DOI : 10.1016/S0017-9310(97)00308-6

B. Jabrallah, S. Belghith, A. Corriou, and J. P. , Etude des transferts coupl??s de mati??re et de chaleur dans une cavit?? rectangulaire: application ?? une cellule de distillation, International Journal of Heat and Mass Transfer, vol.45, issue.4, pp.891-904, 2002.
DOI : 10.1016/S0017-9310(01)00206-X

K. Benz, K. P. Jäckel, K. J. Regenauer, J. Schiewe, K. Drese et al., Utilization of Micromixers for Extraction Processes, Chemical Engineering & Technology, vol.24, issue.1, pp.24-35, 2001.
DOI : 10.1002/1521-4125(200101)24:1<11::AID-CEAT11>3.0.CO;2-Q

P. J. Berenson, Experiments on pool-boiling heat transfer, International Journal of Heat and Mass Transfer, vol.5, issue.10, pp.351-358, 1961.
DOI : 10.1016/0017-9310(62)90079-0

S. Bouman, R. Waalewijn, D. Jong, P. Van-der-linden, and H. J. , Design of falling-film evaporators in the dairy industry, International Journal of Dairy Technology, vol.58, issue.3, pp.100-106, 1993.
DOI : 10.1111/j.1471-0307.1993.tb01256.x

B. Hieronymus, Liber de arte distillandi de simplicibus. (1500) et Liber de arte distillandi de compositis (1512

D. Brutin, F. Topin, and L. Et-tadrist, Experimental study of unsteady convective boiling in heated minichannels, International Journal of Heat and Mass Transfer, vol.46, issue.16, pp.46-2957, 2003.
DOI : 10.1016/S0017-9310(03)00093-0

T. Cachot, La distillation diabatique : Expérimentation et applications industrielles, Thèse de doctorat, 1992.

C. Van and P. , ? Liquid-vapor phase-change phenomena, 1992.

G. P. Celata, M. Cumo, and T. Setaro, Forced convective boiling in binary mixtures, International Journal of Heat and Mass Transfer, vol.36, issue.13, pp.3299-3309, 1993.
DOI : 10.1016/0017-9310(93)90012-U

M. Cerza and V. Sernas, A bubble growth model for nucleate boiling in thin, falling, superheated, laminar, water films, International Journal of Heat and Mass Transfer, vol.28, issue.7, pp.1307-1316, 1985.
DOI : 10.1016/0017-9310(85)90161-9

J. C. Charpentier, Four main objectives for the future of chemical and process engineering mainly concerned by the science and technologies of new materials production, Chemical Engineering Journal, vol.107, issue.1-3, pp.3-17, 2005.
DOI : 10.1016/j.cej.2004.12.004

J. C. Charpentier, In the frame of globalization and sustainability, process intensification, a path to the future of chemical and process engineering (molecules into money), Chemical Engineering Journal, vol.134, issue.1-3, pp.84-92, 2007.
DOI : 10.1016/j.cej.2007.03.084

H. Chen and R. S. Et-jebson, Factors Affecting Heat Transfer in Falling Film Evaporators, Food and Bioproducts Processing, vol.75, issue.2, pp.111-116, 1997.
DOI : 10.1205/096030897531423

L. Chen and D. Mewes, Review of two-phase flow and flow boiling of mixtures in small and mini channels, International Journal of Multiphase Flow, vol.32, issue.2, pp.183-207, 2004.
DOI : 10.1016/j.ijmultiphaseflow.2005.10.001

K. R. Chun and R. A. Et-seban, Heat transfer to evaporating liquid films.Transactions of the ASME, Journal of Heat Transfer, pp.93-391, 1971.
DOI : 10.1115/1.3449836

K. R. Chun and R. A. Seban, Performance Prediction of Falling-Film Evaporators, Journal of Heat Transfer, vol.94, issue.4, p.432, 1972.
DOI : 10.1115/1.3449964

V. Dupont, J. Thome, and A. Et-jacobi, Heat transfer model for evaporation in microchannels. Part II: comparison with the database, International Journal of Heat and Mass Transfer, vol.47, issue.14-16, pp.14-16, 2004.
DOI : 10.1016/j.ijheatmasstransfer.2004.01.007

M. El-genk and H. Saber, Minimum thickness of a flowing down liquid film on a vertical surface, International Journal of Heat and Mass Transfer, vol.44, issue.15, pp.44-2809, 2001.
DOI : 10.1016/S0017-9310(00)00326-4

M. El-haj-assad and M. J. Et-lampinen, Mathematical modeling of falling liquid film evaporation process, 2002.

M. R. Fenske, Fractionation of Straight-Run Pennsylvania Gasoline, Industrial & Engineering Chemistry, vol.24, issue.5, pp.482-485, 1932.
DOI : 10.1021/ie50269a003

Z. Fonyo and G. Fabry, Vegyipari m?velettani alapismeretek, 1998.

T. Fujita and T. Ueda, Heat transfer to falling liquid films and film breakdown???I, International Journal of Heat and Mass Transfer, vol.21, issue.2, pp.97-108, 1976.
DOI : 10.1016/0017-9310(78)90212-0

T. Fujita and T. Ueda, Heat transfer to falling liquid films and film breakdown II. Saturated liquid films with nucleate boiling, Int. J. Heat Mass Transfer, vol.21, pp.109-118, 1978.

G. D. Fulford, The Flow of Liquids in Thin Films, Adv. Chem. Eng, vol.5, pp.151-236, 1964.
DOI : 10.1016/S0065-2377(08)60008-3

E. Ganic and D. Et-getachew, Effects of surface condition and working fluid on liquid film breakdown during heat transfer, Proceedings of the International Heat Transfer Conference, pp.1931-1936, 1986.

C. Gielens, H. D. Tong, C. J. Van-rijn, M. A. Vorstman, and J. T. Et-keurentjes, Microsystem technology for high-flux hydrogen separation membranes, Journal of Membrane Science, vol.243, issue.1-2, pp.203-213, 2004.
DOI : 10.1016/j.memsci.2004.06.021

A. Greco and G. P. Vanoli, Flow boiling heat transfer with HFC mixtures in a smooth horizontal tube. Part I: Experimental investigations, Experimental Thermal and Fluid Science, vol.29, issue.2, pp.189-198, 2005.
DOI : 10.1016/j.expthermflusci.2004.03.003

A. Greco and G. P. Vanoli, Flow boiling heat transfer with HFC mixtures in a smooth horizontal tube. Part II: Assessment of predictive methods, Experimental Thermal and Fluid Science, vol.29, issue.2, pp.199-208, 2005.
DOI : 10.1016/j.expthermflusci.2004.03.004

T. G. Grimley, I. Mudawar, and F. P. Incropera, CHF enhancement in flowing fluorocarbon liquid films using structured surfaces and flow deflectors, International Journal of Heat and Mass Transfer, vol.31, issue.1, pp.55-65, 1988.
DOI : 10.1016/0017-9310(88)90222-0

U. Gropp, G. Schnabel, and E. U. Et-schluender, Influence of Liquid-phase Mass Transfer Resistance on the Selectivity during Partial Evaporation of Binary Mixtures in a Falling Liquid Film Apparatus, Verfahrenstechnik, issue.10, pp.15-725, 1981.

U. Gropp, G. Schnabel, and E. U. Et-schluender, Effect of liquid-side mass transfer resistance on selectivity during partial evaporation of binary mixtures in a falling film, International chemical engineering, vol.23, issue.1, pp.11-17, 1983.

G. Grossman, Heat and Mass Transfer in Film Absorption" in Handbook of Heat and Mass Transfer, 1986.

S. Hardt, F. Doffing, and H. Et-penneman, Simulation of Hydrodynamic dispersion in gas/liquid microreactors, MSM 2002-2002 International Conference on Modeling and simulation of Microsystems, 2002.

L. Hartman-ryan, R. Hemantkumar, B. C. Sahoo, K. F. Yen, and . Jensen, Distillation in microchemical systems using capillary forces and segmented flow, Lab on a Chip, vol.7, issue.13, p.1843, 2009.
DOI : 10.1557/mrs2006.23

V. Hessel, W. Ehrfeld, K. Golbig, V. Haverkamp, H. Löwe et al., Gas / Liquid Microreactors for Direct Fluorination of Aromatic Compounds Using Elemental Fluorine, Microreaction Technology: 3 rd International Conference on Microreaction Technology, Proceedings of IMRET 3, pp.526-540, 2000.
DOI : 10.1007/978-3-642-59738-1_55

V. Hessel, H. Löwe, A. Müller, and G. Kolb, Chemical microprocess engineering-processing and plants, 2005.
DOI : 10.1002/3527603581

URL : http://doi.org/10.1002/3527603581

V. Hessel, C. Knobloch, and H. Löwe, Review on patents in microreactor and microprocess engineering, Recent Patent Chem. Eng, vol.1, pp.1-16, 2008.

B. C. Hoke, J. C. Jr, and . Chen, Mass transfer in evaporating falling liquid film mixtures, AIChE Journal, vol.38, issue.5, p.781, 1992.
DOI : 10.1002/aic.690380515

J. D. Holladay, E. O. Jones, M. Phelps, and J. Hu, Microfuel processor for use in a miniature power supply, Journal of Power Sources, vol.108, issue.1-2, pp.21-27, 2002.
DOI : 10.1016/S0378-7753(01)01011-4

K. Jähnisch, M. Baerns, V. Hessel, W. Ehrfeld, V. Haverkamp et al., Direct fluorination of toluene using elemental fluorine in gas/liquid microreactors, Journal of Fluorine Chemistry, vol.105, issue.1, pp.117-128, 2000.
DOI : 10.1016/S0022-1139(00)00300-6

W. X. Jin, S. C. Low, and T. Et-quek, Preliminary experimental study of falling film heat transfer on a vertical doubly fluted plate, Desalination, vol.152, issue.1-3, pp.201-206, 2002.
DOI : 10.1016/S0011-9164(02)01064-0

S. Kandlikar, A General Correlation for Saturated Two-Phase Flow Boiling Heat Transfer Inside Horizontal and Vertical Tubes, Journal of Heat Transfer, vol.112, issue.1, pp.219-228, 1990.
DOI : 10.1115/1.2910348

S. Kandlikar and W. Et-grande, Evolution of Microchannel Flow Passages--Thermohydraulic Performance and Fabrication Technology, Heat Transfer Engineering, vol.9, issue.1, pp.3-17, 2003.
DOI : 10.1109/84.896774

S. G. Kandlikar and P. Et-balasubramanian, An Extension of the Flow Boiling Correlation to Transition, Laminar, and Deep Laminar Flows in Minichannels and Microchannels, Heat Transfer Engineering, vol.120, issue.3, p.86, 2004.
DOI : 10.1115/1.2911393

S. G. Kandlikar, Heat transfer and fluid flow in minichannels and microchannels, 2006.

P. Kew and K. Et-cornwell, Correlations for the prediction of boiling heat transfer in small-diameter channels, Applied Thermal Engineering, vol.17, issue.8-10, pp.8-10, 1997.
DOI : 10.1016/S1359-4311(96)00071-3

R. Krupiczka, A. Rotkege, and Z. Et-ziobrowski, Heat transfer to evaporating liquid films within a vertical tube, Chemical Engineering and Processing: Process Intensification, vol.41, issue.1, pp.23-38, 2002.
DOI : 10.1016/S0255-2701(00)00158-6

M. Lallemand, Transfert en changement de phase. Ebullition libre, Techniques de L'ingénieur, pp.235-236, 2005.

G. M. Lazarek and S. H. Black, Evaporative heat transfer, pressure drop and critical heat flux in a small vertical tube with R-113, International Journal of Heat and Mass Transfer, vol.25, issue.7, pp.945-960, 1982.
DOI : 10.1016/0017-9310(82)90070-9

J. G. Leidenfrost, On the fixation of water in diverse fire, International Journal of Heat and Mass Transfer, vol.9, issue.11, pp.1153-1166, 1966.
DOI : 10.1016/0017-9310(66)90111-6

P. Löb, H. Pennemann, V. Hessel, and Y. Men, Impact of fluid path geometry and operating parameters on l/l-dispersion in interdigital micromixers, Chem. Eng. Sc, pp.61-2959, 2006.

W. L. Mccabe and E. W. Thiele, Graphical Design of Fractionating Columns, Industrial & Engineering Chemistry, vol.17, issue.6, pp.605-612, 1925.
DOI : 10.1021/ie50186a023

P. E. Minton, Handbook of Evaporation Technofogy, 1986.

V. Miranda and R. Et-simpson, Modelling and simulation of an industrial multiple effect evaporator: tomato concentrate, Journal of Food Engineering, vol.66, issue.2, pp.203-210, 2005.
DOI : 10.1016/j.jfoodeng.2004.03.007

J. A. Moulijn, A. Stankiewicz, J. Grievink, and A. Et-górak, Process intensification and process systems engineering: A friendly symbiosis, Computers & Chemical Engineering, vol.32, issue.1-2, pp.3-11, 2008.
DOI : 10.1016/j.compchemeng.2007.05.014

E. M. Nicolaiewsky and J. R. Et-fair, Liquid Flow over Textured Surfaces. 1. Contact Angles, Industrial & Engineering Chemistry Research, vol.38, issue.1, pp.284-291, 1999.
DOI : 10.1021/ie9800344

S. Nukiyama, The maximum and minimum values of the heat transmitted from metal to boiling water under atmospheric pressure, J. Soc. Mech. Engng Japan, vol.37, pp.367-374, 1934.

R. Numrich, Falling film evaporation of soluble mixtures In: Convective flow boiling, pp.335-338

W. Nusselt, Die oberflächenkondensation des Wasserdamfes, vdi-z, pp.542-575, 1916.

T. Obein, Caractérisation d'un microréacteur à film tombant et étude de la fluoration directe de l'Anisole dans ce microréacteur, Thèse INPL/Rhodia, 2006.

1. W. Palen, Falling Film Evaporation of Wide-Boiling-Range Mixtures Inside a Vertical Tube, PhD Diss, 1988.

J. Palen, Q. Wang, and J. Et-chen, Falling film evaporation of binary mixtures, AIChE Journal, vol.40, issue.2, pp.207-214, 1994.
DOI : 10.1002/aic.690400203

. X. Peng and B. X. Et-wang, Forced convection and flow boiling heat transfer for liquid flowing through microchannels, International Journal of Heat and Mass Transfer, vol.36, issue.14, pp.3421-3427, 1993.
DOI : 10.1016/0017-9310(93)90160-8

X. F. Peng and G. P. Et-peterson, The effect of thermofluid and geometrical parameters on convection of liquids through rectangular microchannels, International Journal of Heat and Mass Transfer, vol.38, issue.4, pp.755-758, 1995.
DOI : 10.1016/0017-9310(95)93010-F

X. F. Peng and G. P. Et-peterson, Convective heat transfer and flow friction for water flow in microchannel structures, International Journal of Heat and Mass Transfer, vol.39, issue.12, pp.2599-2608, 1996.
DOI : 10.1016/0017-9310(95)00327-4

X. F. Peng and G. P. Et-peterson, Forced convection heat transfer of single-phase binary mixtures through microchannels, Experimental Thermal and Fluid Science, vol.12, issue.1, pp.98-104, 1996.
DOI : 10.1016/0894-1777(95)00079-8

X. F. Peng, G. P. Peterson, and B. X. Et-wang, Flow boiling of binary mixtures in microchanneled plates, International Journal of Heat and Mass Transfer, vol.39, issue.6, pp.1257-1264, 1996.
DOI : 10.1016/0017-9310(95)00204-9

R. J. Phillips, Microchannel Heat Sinks, 1987.

M. Ponchon, Application of graphs to the study of commercial fractional distillation, p.55, 1921.

J. S. Prost, M. T. Gonzaalez, and M. J. Et-urbicain, Determination and correlation of heat transfer coefficients in a falling film evaporator, Journal of Food Engineering, vol.73, issue.4, pp.320-326, 2006.
DOI : 10.1016/j.jfoodeng.2005.01.032

C. Ramshaw, The incentive for process intensification. Page 1, 1st International Conference on Process Intensification for Chemical Industry, 1995.

G. Riollet, Thermodynamique appliquée, L'exergie, Techniques de l'ingénieur. Génie énergétique, p.1212, 1992.

R. L. Rivero, analyse d'exergie: application à la distillation diabatique et aux pompes à chaleur à absorption, Thèse de doctorat, 1993.
URL : https://hal.archives-ouvertes.fr/tel-01752292

M. Roustan, Transferts Gaz-Liquide dans les procédés de traitement des eaux et des effluents gazeux, 2003.

R. G. Sardesai, J. W. Palen, and J. G. Thome, Nucleate Pool Boiling of Hydrocarbon Mixtures, AIChE Meeting, p.127, 1986.

E. U. Schlunder, State of the Art of Heat and Mass Transfer, Heal Exchanger Design Handbook, Sec. 2.1.7, 1983.

R. A. Seban and A. Faghri, Wave Effects on the Transport to Falling Laminar Liquid Films, Journal of Heat Transfer, vol.100, issue.1, p.143, 1978.
DOI : 10.1115/1.3450488

R. K. Shah and A. L. London, Laminar Flow Forced Convection in Ducts Advances in Heat Transfer (suppl. 1), 1978.

R. A. Smith and W. Vaporizers, VDI-Wiirmeatlas (VDI Heat Handbook), 1977.

R. A. Smith, Evaporation Heat Exchanger Design Handbook, Sec. 3, 1983.

B. Smitha, S. Sridhar, and A. A. Et-khan, Solid polymer electrolyte membranes for fuel cell applications???a review, Journal of Membrane Science, vol.259, issue.1-2, pp.10-26, 2005.
DOI : 10.1016/j.memsci.2005.01.035

M. Sorin and F. Rheault, Thermodynamically guided intensification of separation processes, Applied Thermal Engineering, vol.27, issue.7, pp.1191-1197, 2007.
DOI : 10.1016/j.applthermaleng.2006.02.043

K. I. Sowata and K. Kusakabe, Design of microchannels for use in distillation devices, p.7, 2003.

A. I. Stankiewicz and J. A. Moulijn, Process intensification: Transforming chemical engineering, Chemical Engineering Progress, 2000.

J. G. Sticklmair and J. R. Fair, Distillation. Principles and practice, 1998.

A. Sundberg, P. Uusi-kyyny, and V. Alopaeus, Novel micro-distillation column for process development, Chemical Engineering Research and Design, vol.87, issue.5, 2008.
DOI : 10.1016/j.cherd.2008.09.011

J. R. Thome and R. A. Et-shock, Boiling of Multicomponent Liquid Mixtures, 1984.
DOI : 10.1016/S0065-2717(08)70204-1

J. R. Thome, Boiling in microchannels: a review of experiment and theory, Heat and Fuid Flow, pp.128-139, 2004.

D. Tondeur and E. Kvaalen, Equipartition of entropy production. An optimality criterion for transfer and separation processes, Industrial & Engineering Chemistry Research, vol.26, issue.1, pp.50-56, 1987.
DOI : 10.1021/ie00061a010

D. Tondeur, Optimisation thermodynamique: équipartition de production d'entropie, Techniques de l'ingénieur, BE, vol.8017, pp.1-15, 2006.

D. Tondeur, F. Tonkovich, A. L. Jarosch, K. Arora, R. Silva et al., Optimisation thermodynamique: équipartition, exemples et applications Techniques de l'ingénieur Methanol production FPSO plant concept using multiple microchannel unit operations, Chem. Eng. J, vol.8018, issue.135, pp.1-19, 2006.

T. Tran, M. Wambsganss, M. Chyu, and D. France, A correlation for nucleate flow boiling in small channels, Compact Heat Exchangers for the Process Industries, pp.353-363, 1997.

T. N. Tran, M. C. Chyu, M. W. Wambsganss, and D. M. France, Two-phase pressure drop of refrigerants during flow boiling in small channels: an experimental investigation and correlation development, International Journal of Multiphase Flow, vol.26, issue.11, pp.1739-1754, 2000.
DOI : 10.1016/S0301-9322(99)00119-6

C. Turner, J. Shaw, B. Miller, and V. Et-bains, Solvent extraction using Micro-Mesh reactors, Proceedings, vol.4, pp.334-340, 2000.

Y. S. Wan, J. L. Chau, A. Gavriilidis, and K. L. Et-yeung, Design and fabrication of zeolite-based microreactors and membrane microseparators, Microporous and Mesoporous Materials, vol.42, issue.2-3, pp.157-175, 2001.
DOI : 10.1016/S1387-1811(00)00332-2

B. X. Wang and . X. Et-peng, Experimental investigation on liquid forced-convection heat transfer through microchannels, International Journal of Heat and Mass Transfer, vol.37, pp.73-82, 1994.
DOI : 10.1016/0017-9310(94)90011-6

R. L. Webb and N. S. Gupte, A Critical Review of Correlations for Convective Vaporization in Tubes and Tube Banks, Heat Transfer Engineering, vol.7, issue.3, pp.58-81, 1992.
DOI : 10.1016/0017-9310(86)90130-4

R. N. Wenzel, RESISTANCE OF SOLID SURFACES TO WETTING BY WATER, Industrial & Engineering Chemistry, vol.28, issue.8, pp.28-988, 1936.
DOI : 10.1021/ie50320a024

F. R. Whitt, Performance of Falling Film Evaporators, British Chem. Eng, vol.11, p.1523, 1966.

W. Ch, W. Ehrfeld, V. Haverkamp, T. Herweck, V. Hessel et al., Dynamic monitoring of fluid equipartition and heat release in a falling film microreactor using real-time thermography, Proceedings MicroTec 2000 VDE World Microtechnologies Congress, 2000.

R. C. Wootton and A. J. Demello, Continuous laminar evaporation: micronscale distillation, Chem. Commun, pp.266-267, 2004.

K. K. Yeong, A. Gavriilidis, R. Zapf, H. J. Kost, V. Hessel et al., Characterisation of liquid film in a microstructured falling film reactor using laser scanning confocal microscopy, Experimental Thermal and Fluid Science, vol.30, issue.5, pp.463-472, 2006.
DOI : 10.1016/j.expthermflusci.2005.09.006

S. Yih, Modelling Heat and Mass Transport in Falling Liquid films In Handbook of Heat and Mass Transfer, p.111, 1986.

K. Yoshioka and S. Hasegawa, An Analytical Model for Displacement Velocity of Liquid Film on a Hot Vertical Surface, Journal of Nuclear Science and Technology, vol.39, issue.322, pp.735-741, 1975.
DOI : 10.1016/0029-5493(72)90050-7

W. Yu, D. M. France, M. W. Wambsganss, and J. R. Hull, Two-phase pressure drop, boiling heat transfer, and critical heat flux to water in a small-diameter horizontal tube, International Journal of Multiphase Flow, vol.28, issue.6, pp.927-941, 2002.
DOI : 10.1016/S0301-9322(02)00019-8

D. Fictif, T. Fictif, T. De, . Volatilite, A. Faible et al., 11 FIGURE I. 2: 13 FIGURE I 14 FIGURE I, Chapitre I : Analyse Bibliographique FIGURE I. 1, p.15

F. I. Production-d-'acetate, . De, . Par, and C. Eastman, 25 FIGURE I. 10 REPRESENTATION, p.32, 2003.

F. I. Representation-d-'un-dispositif, . De, W. Micro-structuree, and S. , 34 FIGURE I, p.35, 2004.

F. I. Micro-procede, . De, E. De-hartmann, . Schematique, and D. Perimetre-mouille, 35 FIGURE I 40 FIGURE I, p.41, 2009.

F. , L. Volumique, M. De, U. Dans, . Tube et al., 49 FIGURE I 50 FIGURE I 52 FIGURE I 54 FIGURE I 55 FIGURE I 57 FIGURE I, p.60, 1934.

I. Chapitre, . Matériel, and F. Méthodes, 80 FIGURE II 80 FIGURE II, 87 FIGURE II. 5: INFLUENCE DE LA STRUCTURATION SUR LE DEBIT NECESSAIRE POUR MOUILLER LA PLAQUE LIQUIDE : ETHANOL ( L ? =1.08 10 -3 PA.S ET L ? =789 KG/M 3 A 20°C) (CF. TABLEAU II.2 POUR LES PLAQUES), p.88

A. Global, C. =100-?m-), M. De, C. De, M. =100-?m-) et al., 90 FIGURE II 90 FIGURE II, 90 FIGURE II. 8 : ASPECT GLOBAL DE LA PLAQUE 2 ( w C =500µM, d C = 150 µM), p.91

P. De and B. , 93 FIGURE II 95 FIGURE II 97 FIGURE II 98 FIGURE II 99 FIGURE II 101 FIGURE II 104 FIGURE II 107 FIGURE II 109 FIGURE II, 110 FIGURE II. 25(A-F): EVOLUTION DE LA TEMPERATURE EN FONCTION DU TEMPS POUR LES SIX POINTS DE MESURES CHOISIS, p.111

W. C. , D. En, . Du, . De, P. Electrique et al., 121 FIGURE III 122 FIGURE III, EVOLUTION PLAQUE N° PLAQUE N° PLAQUE N°, vol.5, issue.3, p.128

D. Debit-d-'ethanol-evapore, . En, . Du, . De, . Transfere-au et al., 131 FIGURE III 132 FIGURE III 135 FIGURE III 137 FIGURE III 139 FIGURE III 142 FIGURE III, FIGURE III. 9: EVOLUTION.. 143 FIGURE III. 17: COURBES D'EBULLITION POUR UN CORPS PUR (ETHANOL) ET POUR UN MELANGE (ETHANOL/N- PROPANOL A 46% D'ETHANOL)-2200W, p.144, 1978.

T. I. Constantes and L. De, 52) KANDLIKAR (1990)), p.71

T. Ii, . Operatoires, and .. 3. Experiences-effectuees-p=101, CONDITIONS, p.112

I. Chapitre, Potentiel du micro-contacteur à films tombants à séparer un mélange binaire éthanol/n-propanol TABLEAU IV, p.147