. Fig, 10 Time evolution of morphology of PP/PC/SEBS blends (leftmiddle) and iso-density surface of PC and SEBS (right)from random initial configuration The red, green, blue and pink beads represent PP, PC, PS block and EB block respectively Varying the content of PS block, SEBS from 36% to 63% (N Meso (PS)=10, N Meso (EB)=10 to N Meso (PS)=10, N Meso (EB)=30) has little effect on the morphology of blend

. Fig, 11 Morphology of PP/PC/SEBS blends (leftmiddle) and iso-density surface of PC and SEBS (right) after 1×10 3 steps simulation from random initial configuration The red, green, blue and pink beads represent PP, PC

K. R. Srinivasan and A. K. Gupta, Mechanical properties and morphology of PP/SEBS/PC blends, Journal of Applied Polymer Science, vol.53, issue.1, pp.1-17, 1994.
DOI : 10.1002/app.1994.070530101

R. J. Borggreve, R. J. Gaymans, J. Schuijer, and H. J. Ingen, Brittle-tough transition in nylon-rubber blends: effect of rubber concentration and particle size, Polymer, vol.28, issue.9, pp.1489-1496, 1987.
DOI : 10.1016/0032-3861(87)90348-X

S. L. Bai, G. T. Wang, J. M. Hiver, and C. Gsell, Microstructures and mechanical properties of polypropylene/polyamide 6/polyethelene-octene elastomer blends, Polymer, vol.45, issue.9, pp.3063-3071, 2004.
DOI : 10.1016/j.polymer.2004.02.070

S. Q. Chang, T. X. Xie, and G. S. Yang, Morphology and mechanical properties of high-impact polystyrene/elastomer/magnesium hydroxide composites, Journal of Applied Polymer Science, vol.98, issue.6, pp.5184-5190, 2006.
DOI : 10.1002/app.24720

F. Sahnoune, C. J. Lopez, and A. Crespy, Improvement of the mechanical properties of an HDPE/PS blend by compatibilization and incorporation of CaCO3, Polymer Engineering & Science, vol.18, issue.3, pp.647-660, 2003.
DOI : 10.1002/pen.10053

G. X. Wei, H. J. Sue, J. Chu, C. Huang, and K. Gong, Toughening and strengthening of polypropylene using the rigid???rigid polymer toughening concept Part I. Morphology and mechanical property investigations, Polymer, vol.41, issue.8, pp.2947-2960, 2000.
DOI : 10.1016/S0032-3861(99)00454-1

L. Zhang, C. Z. Li, and R. Huang, Toughness mechanism of polypropylene/elastomer/filler composites, Journal of Polymer Science Part B: Polymer Physics, vol.26, issue.9, pp.1113-1123, 2005.
DOI : 10.1002/polb.20395

I. Fisher, A. Siegmann, and M. Narkis, The effect of interface characteristics on the morphology, rheology and thermal behavior of three-component polymer alloys, Polymer Composites, vol.5, issue.1, pp.34-48, 2002.
DOI : 10.1515/POLYENG.1997.17.6.461

R. Lach, K. Schneider, R. Weidisch, A. Janke, and K. Knoll, Application of the essential work of fracture concept to nanostructured polymer materials, European Polymer Journal, vol.41, issue.2, pp.383-392, 2005.
DOI : 10.1016/j.eurpolymj.2004.09.021

G. Jannerfeldt, L. Boogh, and J. A. Manson, Influence of hyperbranched polymers on the interfacial tension of polypropylene/polyamide-6 blends, Journal of Polymer Science Part B: Polymer Physics, vol.27, issue.16, pp.2069-2077, 1999.
DOI : 10.1021/ma00100a024

A. V. Machado, M. V. Duin, and J. A. Covas, Monitoring polyolefin modification along the axis of a twin-screw extruder. II. Maleic anhydride grafting, Journal of Polymer Science Part A: Polymer Chemistry, vol.44, issue.93, pp.3919-3932, 2000.
DOI : 10.3139/217.950213

X. H. Liu, Q. J. Wu, L. A. Berglund, J. Q. Fan, and . Qi, Polyamide 6-clay nanocomposites/polypropylene-grafted-maleic anhydride alloys, Polymer, vol.42, issue.19, pp.8235-8239, 2001.
DOI : 10.1016/S0032-3861(01)00307-X

P. Cigana, B. D. Favis, and R. Jerome, Diblock copolymers as emulsifying agents in polymer blends: Influence of molecular weight, architecture, and chemical composition, Journal of Polymer Science Part B: Polymer Physics, vol.34, issue.9, pp.1691-1700, 1996.
DOI : 10.1002/(SICI)1099-0488(19960715)34:9<1691::AID-POLB18>3.0.CO;2-2

P. Cigana and B. D. Favis, The relative efficacy of diblock and triblock copolymers for a polystyrene/ethylene-propylene rubber interface, Polymer, vol.39, issue.15, pp.3373-3378, 1998.
DOI : 10.1016/S0032-3861(97)10041-6

P. Jannasch, H. Hassander, and B. Wesslén, On the macro- and microphase separation of compatibilizers in immiscible polymer blends, Journal of Polymer Science Part B: Polymer Physics, vol.34, issue.7, p.1289, 1996.
DOI : 10.1002/(SICI)1099-0488(199605)34:7<1289::AID-POLB11>3.0.CO;2-6

Z. Starý, I. Fortelný, and . Kruli?, Effect of the molecular structure of ethene???propene and styrene???butadiene copolymers on their compatibilization efficiency in low-density polyethylene/polystyrene blends, Journal of Applied Polymer Science, vol.66, issue.1, pp.174-186, 2008.
DOI : 10.3139/217.0060

L. Kvist, H. Bertilsson, and P. Meuller, Poly(styrene-g-ethylene oxide) copolymers as interfacial agents in immiscible polymer blends, Polymer Engineering & Science, vol.34, issue.8, pp.1303-1312, 1998.
DOI : 10.1002/pen.10301

Y. Lyatskaya, D. Gersappe, N. A. Gross, and A. Balazs, Designing Compatibilizers To Reduce Interfacial Tension in Polymer Blends, The Journal of Physical Chemistry, vol.100, issue.5, pp.1449-1458, 1996.
DOI : 10.1021/jp952422e

D. Bourry and B. Favis, Cocontinuity and phase inversion in HDPE/PS blends: Influence of interfacial modification and elasticity, Journal of Polymer Science Part B: Polymer Physics, vol.36, issue.11, pp.1889-1899, 1998.
DOI : 10.1002/(SICI)1099-0488(199808)36:11<1889::AID-POLB10>3.0.CO;2-3

W. M. Chio, O. O. Park, and J. G. Lim, Effect of diblock copolymers on morphology and mechanical properties for syndiotactic polystyrene/ethylene-propylene copolymer blends, Journal of Applied Polymer Science, vol.35, issue.6, pp.3618-3626, 2004.
DOI : 10.1122/1.550166

D. N. Theodorou and U. W. Suter, Detailed molecular structure of a vinyl polymer glass, Macromolecules, vol.18, issue.7, p.1467, 1985.
DOI : 10.1021/ma00149a018

H. Meirovitch, Computer simulation of self???avoiding walks: Testing the scanning method, The Journal of Chemical Physics, vol.79, issue.1, p.502, 1983.
DOI : 10.1088/0305-4470/8/8/017

J. G. Fraaije, B. A. Van-vlimmeren, N. M. Maurits, M. Postma, O. A. Evers et al., The dynamic mean-field density functional method and its application to the mesoscopic dynamics of quenched block copolymer melts, The Journal of Chemical Physics, vol.63, issue.10, p.4260, 1997.
DOI : 10.1016/0378-4371(88)90080-5

C. F. Fan, T. Cagin, Z. M. Chen, and K. A. Smith, Molecular Modeling of Polycarbonate. 1. Force Field, Static Structure, and Mechanical Properties, Macromolecules, vol.27, issue.9, p.2383, 1994.
DOI : 10.1021/ma00087a004

J. Brandrup, H. I. Immergut, and E. A. Grulke, Polymer Handbook, 1999.

N. C. Liu and W. E. Baker, Reactive polymers for blend compatibilization, Advances in Polymer Technology, vol.11, issue.4, pp.249-262, 1992.
DOI : 10.1002/adv.1992.060110403

J. P. Deng, L. F. Wang, L. Y. Liu, and W. T. Yang, Developments and new applications of UV-induced surface graft polymerizations, Progress in Polymer Science, vol.34, issue.2, pp.156-193, 2009.
DOI : 10.1016/j.progpolymsci.2008.06.002

K. Kelar and B. Jurkowski, Preparation of functionalised low-density polyethylene by reactive extrusion and its blend with polyamide 6, Polymer, vol.41, issue.3, pp.1055-1062, 2000.
DOI : 10.1016/S0032-3861(99)00260-8

G. C. Lee and J. R. Pridon, Brabender viscometry: I. Conversion of brabender curves to instron flow curves, Polymer Engineering and Science, vol.7, issue.5, p.360, 1969.
DOI : 10.1002/pen.760090508

A. Shi and Y. Gong, Engineering plastic handbook. Shanghai science and technology press, 2003.

F. Tseng, J. Lin, C. Tseng, and F. Chang, Poly(oxypropylene)-amide grafted polypropylene as novel compatibilizer for PP and PA6 blends, Polymer, vol.42, issue.2, pp.713-725, 2001.
DOI : 10.1016/S0032-3861(00)00400-6

D. Matjaz, M. Vojko, and S. Ivan, Composites part A: applied science and manufacturing, pp.1282-1290, 2005.

S. L. Bai, G. T. Wang, J. M. Hiver, and C. Gsell, Microstructures and mechanical properties of polypropylene/polyamide 6/polyethelene-octene elastomer blends, Polymer, vol.45, issue.9, pp.3063-3071, 2004.
DOI : 10.1016/j.polymer.2004.02.070

D. Matjaz, M. Vojko, and S. Ivan, Composites Part A: applied science and manufacturing, p.1282, 2005.

M. J. Xie and H. L. Li, Viscosity reduction and disentanglement in ultrahigh molecular weight polyethylene melt: Effect of blending with polypropylene and poly(ethylene glycol), European Polymer Journal, vol.43, issue.8, p.3480, 2007.
DOI : 10.1016/j.eurpolymj.2007.05.016

J. Janssen, Dynamics of liquid-liqiud mixing, 1993.

H. P. Grace, DISPERSION PHENOMENA IN HIGH VISCOSITY IMMISCIBLE FLUID SYSTEMS AND APPLICATION OF STATIC MIXERS AS DISPERSION DEVICES IN SUCH SYSTEMS, Chemical Engineering Communications, vol.10, issue.3-6, p.225, 1982.
DOI : 10.1002/aic.690150512

A. F. Yee, D. Li, and X. Li, The importance of constraint relief caused by rubber cavitation in the toughening of epoxy, Journal of Materials Science, vol.26, issue.23, p.6392, 1993.
DOI : 10.1007/BF01352202

A. J. Kinloch, S. J. Shaw, and D. L. Hunston, Deformation and fracture behaviour of a rubber-toughened epoxy: 1. Microstructure and fracture studies, Polymer, vol.24, issue.10, p.1341, 1983.
DOI : 10.1016/0032-3861(83)90070-8

S. H. Wu, A generalized criterion for rubber toughening: The critical matrix ligament thickness, Journal of Applied Polymer Science, vol.35, issue.2, p.549, 1988.
DOI : 10.1002/app.1988.070350220