R. P. , H. Lieurade, and A. Galtier, Essais de fatigue, Partie I', Techniques de l, 2005.

R. P. , H. Lieurade, and A. Galtier, Essais de fatigue, Partie II, 2005.

A. Zeghloul, Mécanismes d'endommagement des structures, pp.2003-2005

E. Malki and A. A. , thèse de docteur en Sciences de l'ingénieur, 'Influence du chargement sur la propagation en fatigue de fissures courtes dans un acier de construction navale, 2005.

D. I. Nwosu, S. J. Swamidas, and D. O. Olowokere, Local strain computation of crack initiation life of an unstiffened steel tubular T-joint', Computers and Structures, pp.267-2752, 1995.

J. G. Wylde and . Mcdonald, Modes of fatigue crack development and stiffness measurements in welded tubular joints', Fatigue in Offshore Structural Steel, Pages, pp.65-74

M. J. Pates, D. J. Burns, U. Mahaupt, S. J. Swamidas, and K. Munaswamy, Fabrication and fatigue evaluation of welded T-joints for structures in marine environment, pp.1981-1983

H. Neuber, Theory of stress concentration for shear strained prismatic bodies with arbitrary nolinear stress-strain law, Journal of Applied Mechanics, pp.1961-1963

F. V. Lawrence, Estimating the fatigue crack initiation life of welds', Fatigue Testing of Weldments, ASTM STP, vol.648, pp.134-158, 1978.

H. O. Fuchs and R. I. Stephen, Metal Fatigue in Engineering, 1980.

N. E. Dowling, Fatigue at notches and the local strain and fracture mechanics approaches', ASTM STP 677, pp.247-273, 1979.

J. A. Bannantine, J. J. Comer, and J. L. Handrock, Fundamentals of Metal Fatigue Analysis, 1990.

G. R. Irwin, Analysis of stresses and strains near the end of a crack traversing a plate, Journal of Applied Mechanics, pp.361-364, 1957.

. Références, Experiments on concrete filled and reinforced tubular K-joints of truss girder, Journal of Constructional Steel Research, vol.60, pp.3-5, 2004.

M. M. Lee and A. Llewelyn-parry, Strength prediction for ring-stiffened DTjoints in offshore jacket structures', Engineering Structures, pp.421-430, 2005.

M. M. Lee and A. Llewelyn-parry, Strength of ring-stiffened tubular T-joints in offshore structures???, Journal of Constructional Steel Research, vol.51, issue.3, pp.239-2643, 1999.
DOI : 10.1016/S0143-974X(99)00027-9

R. Raju, K. , K. Rao, and M. N. , Elastoplastic behaviour of unstiffened and stiffened steel tubular T-joints, Computers & Structures, vol.55, issue.5, pp.907-914, 1995.
DOI : 10.1016/0045-7949(94)E0296-E

S. T. Lie, C. K. Lee, and S. M. Wong, Model and mesh generation of cracked tubular Y-joints', Engineering Fracture Mechanics, pp.161-1843, 2003.

M. M. Lee and D. Bowness, Estimation of stress intensity factor solutions for weld toe cracks in offshore tubular joints, International Journal of Fatigue, vol.24, issue.8, pp.861-875, 2002.
DOI : 10.1016/S0142-1123(01)00209-2

S. P. Chiew, S. T. Lie, C. K. Lee, and Z. W. Huang, Stress intensity factors for a surface crack in a tubular T-joint, International Journal of Pressure Vessels and Piping, pp.677-6853, 2001.

M. M. Lee, Estimation of stress concentrations in single-sided welds in offshore tubular joints, International Journal of Fatigue, vol.21, issue.9, pp.895-9083, 1999.
DOI : 10.1016/S0142-1123(99)00083-3

J. Cao, G. Yang, and J. Packer, FE mesh generation for circular joints with or without cracks', The Proceeding of the 7 th International Offshore and Polar Engineering Conference, pp.98-105, 1997.

G. J. Van-der-vegte and J. Wardenier, The static strength of multiplanar tubular TX-joints under axial loading excluding the effects of overall chord bending moments, Journal of Constructional Steel Research, vol.47, issue.1-2, pp.1-2, 1998.
DOI : 10.1016/S0143-974X(98)80106-5

L. Bian and J. Lim, Fatigue strength and stress concentration factors of CHS-to-RHS T-joints, Journal of Constructional Steel Research, vol.59, issue.5, pp.627-640, 2003.
DOI : 10.1016/S0143-974X(02)00048-2

&. Li-chun-bian and . Lim, Fatigue fracture behaviour of hollow section joints, Proceedings of the Conference of Korea Welding Society, 2001.

E. Bortolotti, J. P. Jaspart, C. Pietrapertosa, G. Nicaud, P. D. Petitjean et al., Testing and modelling of welded joints between elliptical hollow sections', papiers techniques de INTERPIPE

S. T. Lie, C. K. Lee, and S. M. Wong, Modelling and mesh generation of weld profile in tubular Y-joint, Journal of Constructional Steel Research, vol.57, issue.5, pp.547-567, 2001.
DOI : 10.1016/S0143-974X(00)00031-6

K. Hibbit and . Inc, ABAQUS/Standard User's Manual', Version 6.2 -6, 2002.

P. W. Marshall and W. H. Luyties, Allowable stresses for fatigue design, Proceedings Behaviour of Offshore Structures, 1982.

M. W. Kellogg, Design of piping systems, 2 nd Edition, 1956.

P. W. Marshall, Design of welded tubular connections' , basis and use of AWS code previsions, 1992.

J. G. Kuang, A. B. Potvin, and R. D. Leick, Stress Concentration in Tubular Joints, Offshore Technology Conference, 1975.
DOI : 10.4043/2205-MS

A. C. Wordsworth, Stress concentration factors at K and KT tubular joints, Fatigue of Offshore Structural Steels, Conference Proceedings, Pages 59-69, 1981.

M. Efthymiou and S. Durkin, Stress concentration in T, Proceedings Behavior of Offshore Structures, pp.429-440, 1985.

M. Efthymiou, Development of SCF formulae and generalized fonctions for use in fatigue analysis', Offshore Technology Conference, OTC, vol.88, 1988.

S. A. Karamanos, A. Romeijn, and J. Wardenier, Stress concentration in tubular gap K-joints : mechanics and fatigue design', Engineering Structure, pp.4-14, 2000.

D. I. Nwosu, S. J. Swamidas, and D. O. Olowokere, Local strain computation of crack initiation life of an unstiffened steel tubular T-joint', Computers and Structures, pp.267-2754, 1995.

M. P. Conolly, A. K. Hellier, W. D. Dover, and J. Sutomo, A parametric study of the ratio of bending to membrane stress in tubular Y- and T-joints, International Journal of Fatigue, vol.12, issue.1, pp.3-11, 1992.
DOI : 10.1016/0142-1123(90)90337-E

S. T. Lie, C. K. Lee, S. P. Chiew, and Y. B. Shao, Mesh modelling and analysis of cracked uni-planar tubular K-joints, Journal of Constructional Steel Research, vol.61, issue.2, pp.235-264, 2005.
DOI : 10.1016/j.jcsr.2004.05.006

C. K. Lee, S. T. Lie, S. P. Chiew, and Y. B. Shao, Numerical models verification of cracked tubular T, Y and K-joints under combined loads', Engineering Fracture Mechanics, pp.983-1009, 2005.

J. J. Cao, G. J. Yang, J. A. Packer, and F. M. Burdekin, Crack modeling in FE analysis of circular tubular joints', Engineering Fracture Mechanics, pp.5-6, 1998.

J. Cao, G. Yang, and J. Packer, FE mesh generation for circular joints with or without cracks', The Proceeding of the 7 th International Offshore and Polar Engineering Conference, pp.98-105, 1997.

L. Bian and J. Lim, Fatigue strength and stress concentration factors of CHS-to-RHS T-joints, Journal of Constructional Steel Research, vol.59, issue.5, pp.627-640, 2003.
DOI : 10.1016/S0143-974X(02)00048-2

U. Zerbst, J. Heerens, and K. Schwalbe, The fracture behaviour of a welded tubular joint??an ESIS TC1.3 round robin on failure assessment methods: Part I: experimental data base and brief summary of the results', Engineering Fracture Mechanics, pp.5-9, 2002.

Y. B. Shao, Analysis of stress intensity factor (SIF) for cracked tubular K-joints subjected to balanced axial load' , Engineering Failure Analysis, pp.44-64, 2006.

Y. B. Shao and S. T. Lie, Parametric equation of stress intensity factor for tubular Kjoint under balanced axial loads, International Journal of Fatigue, vol.27, issue.6, pp.666-6795, 2005.

S. T. Lie, C. K. Lee, S. P. Chiew, and Y. B. Shao, Validation of surface crack stress intensity factors of a tubular K-joint', International Journal of Pressure Vessels and Piping, pp.610-6175, 2005.

S. T. Lie, C. K. Lee, S. P. Chiew, and Y. B. Shao, Mesh modelling and analysis of cracked uni-planar tubular K-joints, Journal of Constructional Steel Research, vol.61, issue.2, pp.235-264, 2005.
DOI : 10.1016/j.jcsr.2004.05.006

C. K. Lee, S. T. Lie, S. P. Chiew, and Y. B. Shao, Numerical models verification of cracked tubular T, Y and K-joints under combined loads', Engineering Fracture Mechanics, pp.983-10095, 2005.

W. M. Gho, F. Gao, and Y. Yang, Load combination effects on stress and strain concentration of completely overlapped tubular K(N)-joints', Thin-Walled Structures, pp.1243-1263, 2005.

W. M. Gho and F. Gao, Parametric equations for stress concentration factors in completely overlapped tubular K(N)-joints, Journal of Constructional Steel Research, vol.60, issue.12, pp.1761-1782, 2004.
DOI : 10.1016/j.jcsr.2004.05.003

K. C. Gulati, W. J. Wang, and D. K. Kan, An analytical study of stress concentration effects in nultibrace joints under combined loading, Proceedings of the 14 th annual offshore technology conference, pp.337-355, 1982.

B. Talei-faz, F. P. Brennan, and W. D. Dover, Residual static strength of high strength steel cracked tubular joints', Marine Structures, pp.3-4, 2004.

L. S. Etube, P. T. Myers, F. P. Brennan, W. D. Dover, and A. Stacey, Constant and variabl amplitude corrosion fatigue performance of a high strength jack-up steel, Proceedings of the International Society of Offshore and Polar Engineers conference, pp.123-153, 1998.

R. P. , H. Lieurade, and A. Galtier, Essais de fatigue, Partie I', Techniques de l, 2005.

R. P. , H. Lieurade, and A. Galtier, Essais de fatigue, Partie II, 2005.

A. Zeghloul, Mécanismes d'endommagement des structures, 2003.

E. Malki and A. A. , thèse de docteur en Sciences de l'ingénieur, 'Influence du chargement sur la propagation en fatigue de fissures courtes dans un acier de construction navale, 2005.

A. Schumacher and A. Nussbaumer, Experimental study on the fatigue behaviour of welded tubular K-joints for bridges', Engineering Structures, pp.745-755, 2006.

W. D. Dover, S. Dharmavasan, S. P. Brennan, and K. J. Marsh, Fatigue crack growth in offshore structures, Engineering Materials Advisory Services (EMAS) Ltd, 1995.

A. Schumacher and A. Nussbaumer, Experimental study on the fatigue behaviour of welded tubular K-joints for bridges', Engineering Structures, pp.745-755, 2006.

Y. B. Shao, Analysis of stress intensity factor (SIF) for cracked tubular K-joints subjected to balanced axial load' , Engineering Failure Analysis, pp.44-64, 2006.

Y. B. Shao and S. T. Lie, Parametric equation of stress intensity factor for tubular Kjoint under balanced axial loads, International Journal of Fatigue, vol.27, issue.6, pp.666-6798, 2005.

S. T. Lie, C. K. Lee, S. P. Chiew, and Y. B. Shao, Validation of surface crack stress intensity factors of a tubular K-joint', International Journal of Pressure Vessels and Piping, pp.610-6178, 2005.

S. T. Lie, C. K. Lee, S. P. Chiew, and Y. B. Shao, Mesh modelling and analysis of cracked uni-planar tubular K-joints, Journal of Constructional Steel Research, vol.61, issue.2, pp.235-264, 2005.
DOI : 10.1016/j.jcsr.2004.05.006

G. Henaff-&-f and . Morel, Fatigue des structures', ellipses, 2005.

D. François, Endommagement et rupture des matériaux, EDP sciences, 2004.

. Institut-international-de-la-soudure, Recommandations pour la conception en fatigue des assemblages et des composants soudés', IIW document XIII-1539-96, pp.845-96, 1996.

D. Radaj and C. M. Sonsino, Fatigue Assessement of Welded, Joints by Local Approaches, 1998.

J. Janosch, S. Debiez, M. Clerge, D. Van, and K. , Integration of weld residual stresses into the local mechanical approach for optimising the fatigue strength of fillet welded assemblies', Compte rendu de la conférence internationale sur 'La fatigue des structures et composants soudés, pp.103-112, 1996.

. Vishay-micromesures, Théorie des jauges électriques d'éxtensometrie, p.56

L. Jean-luc, . Goër, and A. Jean, Capteurs à jauges éxtensometriques', R1860

. Vishay-micromesures, Dépouillement des mesures par jauges électriques', NT57, 1991.

. American-petroleum-institute, Recommended practice for planning, designing and constructing fixed offshore platformsworking stress design', API RP2A, pp.5-12, 2000.

A. Schumacher and A. Nussbaumer, Experimental study on the fatigue behaviour of welded tubular K-joints for bridges', Engineering Structures, 2001.

J. A. Bannantine, J. J. Comer, and J. L. Handrock, Fundamentals of Metal Fatigue Analysis, pp.1990-1992

E. Bortolotti, J. P. Jaspart, C. Pietrapertosa, G. Nicaud, P. D. Petitjean et al., Testing and modelling of welded joints between elliptical hollow sections', papiers techniques de INTERPIPE

F. M. Burdekin, M. J. Cheaitani, and S. D. Thurlbeck, Fatigue fracture and plastic collapse of offshore tubular joints using BSI PD 6493, Proceedings of the 14 th International Conference on Offshore Mechanics and Arctic Engineering, pp.41-541, 1991.

J. Cao, G. Yang, and J. Packer, FE mesh generation for circular joints with or without cracks', The Proceeding of the 7 th International Offshore and Polar Engineering Conference, pp.4-13, 1997.

J. J. Cao, G. J. Yang, J. A. Packer, and F. M. Burdekin, Crack modeling in FE analysis of circular tubular joints', Engineering Fracture Mechanics, pp.5-6, 1998.

E. Chang and W. D. Dover, Parametric equations to predict stress distributions along the intersection of tubular X and DT-joints, International Journal of Fatigue, vol.21, issue.6, pp.619-635, 1999.
DOI : 10.1016/S0142-1123(99)00018-3

E. Chang and W. D. Dover, Stress concentration factor parametric equations for tubular X and DT joints, International Journal of Fatigue, vol.18, issue.6, pp.363-3874, 1996.
DOI : 10.1016/0142-1123(96)00017-5

S. P. Chiew, S. T. Lie, C. K. Lee, and Z. W. Huang, Stress intensity factors for a surface crack in a tubular T-joint, International Journal of Pressure Vessels and Piping, pp.677-685, 2001.

S. P. Chiew and C. K. Soh, Strain concentrations at intersection regions of a multiplanar tubular DX-joint, Journal of Constructional Steel Research, vol.53, issue.2, 2000.
DOI : 10.1016/S0143-974X(99)00068-1

S. P. Chiew, C. K. Soh, and N. W. Wu, General SCF design equations for steel multiplanar tubular XX-joints, International Journal of Fatigue, vol.22, issue.4, pp.1-114, 2000.
DOI : 10.1016/S0142-1123(99)00130-9

M. P. Conolly, A. K. Hellier, W. D. Dover, and J. Sutomo, A parametric study of the ratio of bending to membrane stress in tubular Y- and T-joints, International Journal of Fatigue, vol.12, issue.1, pp.3-114, 1992.
DOI : 10.1016/0142-1123(90)90337-E

D. Systèmes, Standard User's Manual', Version 6, pp.2005-2006

. Det-norske and . Veritas, Fabrication and testing of offshore structures', Offchore standard DVN-OS-C401, pp.6-8, 2004.

W. D. Dover and S. Dharmavasan, Fatigue fracture mechanics analysis of T and Y joints', Paper OTC 4404 of Offshore Technology Conference, TX, pp.1982-1984

W. D. Dover, S. Dharmavasan, S. P. Brennan, and K. J. Marsh, Fatigue crack growth in offshore structures, Engineering Materials Advisory Services (EMAS) Ltd, pp.5-20, 1995.

N. E. Dowling, Fatigue at notches and the local strain and fracture mechanics approaches', ASTM STP 677, Pages 247-273, pp.2-11, 1979.

M. Efthymiou and S. Durkin, Stress concentration in T, Proceedings Behavior of Offshore Structures, pp.429-4403, 1985.

M. Efthymiou, Development of SCF formulae and generalized fonctions for use in fatigue analysis', Offshore Technology Conference, pp.3-27, 1988.

E. Malki and A. A. , thèse de docteur en Sciences de l'ingénieur, 'Influence du chargement sur la propagation en fatigue, pp.5-18

L. S. Etube, F. P. Brennan, and W. D. Dover, Review of empirical and semi-empirical Y factor solutions for cracked welded tubular joints' , Marine Structures 12, pp.565-583

L. S. Etube, P. T. Myers, F. P. Brennan, W. D. Dover, and A. Stacey, Constant and variabl amplitude corrosion fatigue performance of a high strength jack-up steel, Proceedings of the International Society of Offshore and Polar Engineers conference, pp.5-14, 1998.

H. O. Fuchs and R. I. Stephen, Metal Fatigue in Engineering, pp.2-10, 1980.

G. Henaff-&-f and . Morel, Fatigue des structures', ellipses, 2005.

P. Gandhi, R. Murty, D. S. Raghava, G. , M. Rao et al., Fatigue crack growth in stiffened steel tubular joints in seawater environment, Engineering Structures, pp.1-6, 1390.

W. M. Gho and F. Gao, Parametric equations for stress concentration factors in completely overlapped tubular K(N)-joints, Journal of Constructional Steel Research, vol.60, issue.12, pp.1761-17825, 2004.
DOI : 10.1016/j.jcsr.2004.05.003

W. M. Gho, F. Gao, and Y. Yang, Load combination effects on stress and strain concentration of completely overlapped tubular K(N)joints' , Thin-Walled Structures, pp.1243-12635, 2005.

K. C. Gulati, W. J. Wang, and D. K. Kan, An analytical study of stress concentration effects in nultibrace joints under combined loading, Proceedings of the 14 th annual offshore technology conference, pp.337-355, 1982.

B. E. Healy and J. Buitrago, Extrapolation procedures for determining SCFs in mid-surface tubular joints models, Proceedings 6 th International Symposium on Tubular Structures, pp.651-6591, 1994.

K. Hibbit and . Inc, ABAQUS/Standard User's Manual', Version 6.2 -6, 2002.

. Institut-international-de-la-soudure, Recommandations pour la conception en fatigue des assemblages et des composants, pp.8-10

G. R. Irwin, Analysis of stresses and strains near the end of a crack traversing a plate, Journal of Applied Mechanics, pp.361-364

J. Janosch, S. Debiez, M. Clerge, D. Van, and K. , Integration of weld residual stresses into the local mechanical approach for optimising the fatigue strength of fillet welded assemblies', Compte rendu de la conférence internationale sur 'La fatigue des structures et composants soudés, pp.103-1128, 1996.

S. A. Karamanos, A. Romeijn, and J. Wardenier, Stress concentration in tubular gap K-joints : mechanics and fatigue design', Engineering Structure, 2000.

M. W. Kellogg, Design of piping systems', 2 nd Edition, pp.3-19, 1956.

J. G. Kuang, A. B. Potvin, and R. D. Leick, Stress Concentration in Tubular Joints, Offshore Technology Conference, pp.3-23, 1975.
DOI : 10.4043/2205-MS

F. V. Lawrence, Estimating the fatigue crack initiation life of welds', Fatigue Testing of Weldments, ASTM STP, vol.648, pp.134-158

L. Goër, J. Et, and A. J. , Capteurs à jauges éxtensometriques', R1860, Techniques de l'ingénieur

C. K. Lee, S. T. Lie, S. P. Chiew, and Y. B. Shao, Numerical models verification of cracked tubular T, Y and K-joints under combined loads', Engineering Fracture Mechanics, pp.983-1009, 2005.

C. K. Lee, S. T. Lie, S. P. Chiew, and Y. B. Shao, Numerical models verification of cracked tubular T, Y and K-joints under combined loads', Engineering Fracture Mechanics, pp.5-8

M. M. Lee and D. Bowness, Estimation of stress intensity factor solutions for weld toe cracks in offshore tubular joints, International Journal of Fatigue, vol.24, issue.8, pp.861-8753, 2002.
DOI : 10.1016/S0142-1123(01)00209-2

M. M. Lee and A. Llewelyn-parry, Strength of ring-stiffened tubular T-joints in offshore structures???, Journal of Constructional Steel Research, vol.51, issue.3, pp.239-2643, 1999.
DOI : 10.1016/S0143-974X(99)00027-9

M. M. Lee and A. Llewelyn-parry, Strength prediction for ringstiffened DT-joints in offshore jacket structures', Engineering Structures, pp.421-4303, 2005.

M. M. Lee, Estimation of stress concentrations in single-sided welds in offshore tubular joints, International Journal of Fatigue, vol.21, issue.9, pp.895-9083, 1999.
DOI : 10.1016/S0142-1123(99)00083-3

M. M. Lee, Estimation of stress concentrations in single-sided welds in offshore tubular joints, International Journal of Fatigue, vol.21, issue.9, pp.4-6, 1999.
DOI : 10.1016/S0142-1123(99)00083-3

F. Lerouge, M. Rossetto, and P. Agati, Découvrir Le Calcul de Structure', édition Adéquation, 1996.

&. Li-chun-bian and . Lim, Fatigue fracture behaviour of hollow section joints, Proceedings of the Conference of Korea Welding Society, pp.3-12, 2001.

L. Bian and J. Lim, Fatigue strength and stress concentration factors of CHS-to-RHS T-joints, Journal of Constructional Steel Research, vol.59, issue.5, 2002.
DOI : 10.1016/S0143-974X(02)00048-2

S. T. Lie, C. K. Lee, and S. M. Wong, Modelling and mesh generation of weld profile in tubular Y-joint, Journal of Constructional Steel Research, vol.57, issue.5, pp.547-5673, 2001.
DOI : 10.1016/S0143-974X(00)00031-6

S. T. Lie, C. K. Lee, and S. M. Wong, Model and mesh generation of cracked tubular Y-joints', Engineering Fracture Mechanics, pp.161-1843, 2003.

S. T. Lie, C. K. Lee, S. P. Chiew, and Y. B. Shao, Mesh modelling and analysis of cracked uni-planar tubular K-joints, Journal of Constructional Steel Research, 2005.
DOI : 10.1016/j.jcsr.2004.05.006

S. T. Lie, C. K. Lee, S. P. Chiew, and Y. B. Shao, Validation of surface crack stress intensity factors of a tubular K-joint', International Journal of Pressure Vessels and Piping, pp.5-6

. Lloyd-'s, . Register, and . Shipping, Stress concentration factors for simple tubular joints', HSE books, 1997.

P. W. Marshall and W. H. Luyties, Allowable stresses for fatigue design, Proceedings Behaviour of Offshore Structures, pp.3-18, 1982.

P. W. Marshall, Design of welded tubular connections', basis and use of AWS code previsions, pp.3-20, 1992.

T. Gmür, Méthode des éléments finis en mécanique des structures, pp.2000-2002

M. R. Morgan and M. K. Lee, Parametric equations for distributions of stress concentration factors in tubular K-joints under out-of-plane moment loading, International Journal of Fatigue, vol.20, issue.6, pp.449-4611, 1998.
DOI : 10.1016/S0142-1123(98)00011-5

P. Myers, Corrosion fatigue fracture mechanics of high strength jack-up steels, pp.2-18, 1998.

H. Neuber, Theory of stress concentration for shear strained prismatic bodies with arbitrary nolinear stress-strain law', Journal of Applied Mechanics, Pages 544-550, pp.1961-1962

J. C. Newman and I. S. Raju, An empirical stress intensity factor equation for the surface crack', Engng. Fracture Mech., Pages, pp.185-192

D. I. Nwosu, S. J. Swamidas, and D. O. Olowokere, Local strain computation of crack initiation life of an unstiffened steel tubular Tjoint' , Computers and Structures, 1995.

H. L. Pang and C. W. Lee, Three-dimensional finite element analysis of a tubular T-joint under combined axial and bending loading, International Journal of Fatigue, vol.17, issue.5, pp.313-3203, 1995.
DOI : 10.1016/0142-1123(95)00019-P

M. J. Pates, D. J. Burns, U. Mahaupt, S. J. Swamidas, and K. Munaswamy, Fabrication and fatigue evaluation of welded T-joints for structures in marine environment, pp.1981-1983

R. P. , H. Lieurade, and A. Galtier, Essais de fatigue, Partie I', Techniques de l'Ingénieur, M4170, pp.5-15, 2005.

R. P. , H. Lieurade, and A. Galtier, Essais de fatigue, Partie II', Techniques de l'Ingénieur, M4171, 2005.

D. Radaj and C. M. Sonsino, Fatigue Assessement of Welded, Joints by Local Approaches, pp.8-11, 1998.

R. Raju, K. , K. Rao, and M. N. , Elastoplastic behaviour of unstiffened and stiffened steel tubular T-joints, Computers & Structures, vol.55, issue.5, pp.907-9143, 1995.
DOI : 10.1016/0045-7949(94)E0296-E

A. Romeijn, Stress and strain concentration factors of welded multiplanar tubular joints The Netherlands, 1994.

. Sfm, Fatigue des assemblages soudés', Journées de printemps, paris 4 et 5 juin, pp.8-15, 1985.

Y. B. Shao and S. T. Lie, Parametric equation of stress intensity factor for tubular K-joint under balanced axial loads, International Journal of Fatigue, vol.27, issue.6

Y. B. Shao, Analysis of stress intensity factor (SIF) for cracked tubular K-joints subjected to balanced axial load' , Engineering Failure Analysis, 2002.

A. Soh and C. Soh, Stress concentrations of K tubular joints subjected to basic and combined loadings, Proceedings of the Institution of Civil Engineers, Structures and Buildings, pp.19-28

B. Talei-faz, F. P. Brennan, and W. D. Dover, Residual static strength of high strength steel cracked tubular joints', Marine Structures, pp.291-3095, 2004.

U. Zerbst, J. Heerens, and K. Schwalbe, The fracture behaviour of a welded tubular joint??an ESIS TC1.3 round robin on failure assessment methods: Part I: experimental data base and brief summary of the results', Engineering Fracture Mechanics, pp.5-8, 2002.

G. J. Van-der-vegte and J. Wardenier, The static strength of multiplanar tubular TX-joints under axial loading excluding the effects of overall chord bending moments, Journal of Constructional Steel Research, vol.47, issue.1-2, pp.1-2, 1998.
DOI : 10.1016/S0143-974X(98)80106-5

. Vishay-micromesures, Dépouillement des mesures par jauges électriques', NT57, 1991.

. Vishay-micromesures, Théorie des capteurs à jauges', NT31C

. Vishay-micromesures, Théorie des jauges électriques d'éxtensometrie', NT56C

A. C. Wordsworth, Stress concentration factors at K and KT tubular [3-24] joints, Fatigue of Offshore Structural Steels, Conference Proceedings, Pages 59-69, 1981.

J. G. Wylde and . Mcdonald, Modes of fatigue crack development and stiffness measurements in welded tubular joints', Fatigue in Offshore Structural Steel, Pages, pp.65-74

Y. Sakai, T. Hosaka, A. Isoe, A. Ichikawa, and &. Mitsuki, Experiments on concrete filled and reinforced tubular K-joints of truss girder, Journal of Constructional Steel Research, vol.60, issue.3-5, 2001.
DOI : 10.1016/S0143-974X(03)00136-6

A. Zeghloul, Mécanismes d'endommagement des structures, 2003.