. Comportement-mécanique-du-palier-Élastique-proposé......, 125 viii Bibliographie [1] Technical achievement : the development and promotion of DNA microarrays. Takeda Awards, 2002.

J. Abadie, Etude et réalisation de micro-actionneurs intégrés à base d'alliages à mémoire de forme, 2000.

G. Abba, P. Kastner, S. D. Manoir, and B. Jost, Apparatus for removing and depositing microarrays of solutions, 2002.

L. Allain, D. N. Stratis-cullum, and T. Vo-dinh, Investigation of microfabrication of biological sample arrays using piezoelectric and bubble-jet printing technologies, Analytica Chimica Acta, vol.518, issue.1-2, pp.77-85, 2004.
DOI : 10.1016/j.aca.2004.04.065

K. K. Ananthasuresh and S. Kota, Designing compliant mechanisms, Mechanical Engineering, vol.117, issue.11, pp.93-96, 1995.

C. André, Biopuces à autogènes pour la caractérisation des anticorps dans les maladies ato-immunes. GEAI l'Info, pp.20-22, 2005.

C. Anthierens, Conception d'un microrobot à actionneur asservi électropneumatique pour l'inspection intratubulaire, 1999.

M. Bassière and E. Gaignebet, Métrologie Générale. Théorie de la Mesure, Les instruments et leur emploi, 1966.

P. Belaubre, Conception et réalisation d'un micro-système robotisé de dépôt de produits biologiques par micro-leviers en silicium pour l'élaboration de biopuces, 2003.

P. Belaubre, M. Guirardel, and C. Bergaud, Microsystèmes de dépôt de solutions biologiques pour l'élaboration de biopuces, Recherche, vol.42, pp.1-9, 2005.

Y. Bellouard, Conception de dispositifs en alliage à mémoire de forme en microtechnique, 2000.

Y. Bellouard and R. Clavel, Shape memory alloy flexures, Materials Science and Engineering: A, vol.378, issue.1-2, pp.210-215, 2004.
DOI : 10.1016/j.msea.2003.12.062

W. L. Benard, H. Kahn, A. H. Heuter, and M. A. Huff, Thin-film shape-memory alloy actuated micropumps, Journal of Microelectromechanical Systems, vol.7, issue.2, pp.245-251, 1998.
DOI : 10.1109/84.679390

H. Benzaoui, C. Lexcellent, N. Chaillet, B. Lang, and A. Bourjault, Experimental Study and Modeling of a TiNi Shape Memory Alloy Wire Actuator, Journal of Intelligent Material Systems and Structures, vol.3, issue.1, pp.619-629, 1997.
DOI : 10.1016/0921-8890(94)90036-1

P. Bernardoni, C. Bidard, F. Gosselin, and P. Bidaud, Méthodes de conception de structures flexibles à l'échelle mésoscopique, 2002.

B. Beuf, F. Raynal, J. Gence, and E. Souteyrand, Vers une meilleure hybridation des biopuces à ADN grâce au mélange par advection chaotique. 17 ime Congrès Français de Mécanique, p.744, 2005.

A. P. Blanchart, R. J. Kaiser, and L. E. Hood, High-density oligonucleotide arrays, Biosensors and Bioelectronics, vol.11, issue.6-7, pp.687-690, 1996.
DOI : 10.1016/0956-5663(96)83302-1

J. Boulanger, Tolérances et écarts dimensionnels, géométriques et d'états de surface, p.5, 1991.

A. Bourjault, La microrobotique, sous la directon de A. Bourjault et N. Chaillet, chapter Problématique de la microrobotique, pp.15-26, 2002.

R. Bourquin, La microrobotique, sous la directon de A. Bourjault et N. Chaillet, chapter Micro-actionneurs piézo-électriques, pp.165-198, 2002.

D. D. Bowtell, Options available ??? from start to finish ??? for obtaining expression data by microarray, Nature Genetics, vol.21, pp.25-32, 1999.
DOI : 10.1038/4455

P. Brown and D. Bostein, Exploring the new world of the genome with DNA microarrays, Nature Genetics, vol.21, pp.33-37, 1999.
DOI : 10.1038/4462

Z. Bryning and C. Vann, Apparatus and method for spotting a substrate. International Application Published under the Patent Cooperation Treaty, 2000.

S. Bütefisch, V. Seidemann, and S. Büttgenbach, Novel micro-pneumatic actuator for mems. Sensors and actuators A, pp.97-98638, 2002.

M. Campàs and I. Katakis, DNA biochip arraying, detection and amplification strategies, TrAC Trends in Analytical Chemistry, vol.23, issue.1, pp.49-62, 2004.
DOI : 10.1016/S0165-9936(04)00104-9

]. N. Chaillet, H. Benzaoui, M. Calin, J. Abadie, M. Touaibia et al., Shape memory alloys actuators for microrobots, Proc. of Second International Workshop on Microrobotics and Systems, IARP'98, 1998.

N. Chaillet, L. Buchaillot, J. Abadie, I. Roch, and C. Lexcellent, Microactionneurs électroactifs, sous la directon de O. Cugat, chapter Micro-actionneurs en alliage à mémoire de forme, pp.179-224, 2002.

N. Chaillet, C. Lexcellent, and J. Abadie, Etude des temps de chauffage et de refroidissement des alliages à mémoire de forme (AMF) Comptes Rendus de l'Académie des Sciences -Mécanique, pp.147-152, 2004.

V. G. Cheung, M. Morley, F. Aguilar, A. Massimi, R. Kucherlapati et al., Making and reading microarrays, Nature Genetics, vol.21, pp.15-19, 1999.
DOI : 10.1038/4439

T. Chin, Permanent magnet films for applications in micro-electromechanical systems, Journal of Magnetism and Magnetic Materials, vol.209, pp.1-375, 2000.

P. H. Cleveland and . Microarrayer, United States Patent Application Publication, 2003.

M. Colina, P. Serra, J. M. Frenández-pradas, L. Sevilla, and J. L. Morenza, DNA deposition through laser induced forward transfer, Biosensors and Bioelectronics, vol.20, issue.8, pp.1638-1642, 2005.
DOI : 10.1016/j.bios.2004.08.047

D. Collard, Micro-actionneurs électroactifs, sous la directon de O. Cugat, chapter Actionnement électrostatique, pp.67-108, 2002.

P. Dario, R. Vallegi, M. C. Carroza, M. C. Montesi, and M. Cocco, Microactuators for microrobots: a critical survey, Journal of Micromechanics and Microengineering, vol.2, issue.3, pp.171-175, 1992.
DOI : 10.1088/0960-1317/2/3/005

J. De-risi, V. Lyer, and P. O. Brown, Exploring the Metabolic and Genetic Control of Gene Expression on a Genomic Scale, Science, vol.278, issue.5338, pp.680-686, 1997.
DOI : 10.1126/science.278.5338.680

J. and D. Vos, Les puces à ADN en hématlologie, 1ière partie : les puces à ADN. Les cahiers d'hématologie, pp.393-400, 2003.

V. Devauchelle and G. Chiocchia, Quelle place pour les puces à ADN dans les maladies inflammatoires ? La revue de médecine interne, pp.732-739, 2004.
DOI : 10.1016/j.revmed.2004.02.004

N. Dhiman, R. Bonilla, D. O-'kane, and G. A. Poland, Gene expression microarrays: a 21st century tool for directed vaccine design, Vaccine, vol.20, issue.1-2, pp.22-23, 2002.
DOI : 10.1016/S0264-410X(01)00319-X

D. J. Duggan, M. Bittner, Y. Chen, P. Meltzer, and J. M. Trent, Expression profiling using cDNA microarrays, Nature Genetics, vol.21, pp.10-14, 1999.
DOI : 10.1038/4434

W. Ehrfeld, P. Bley, F. Götz, P. Hagmann, A. Maner et al., Fabrication of microsctructures using LIGA process, Proceedings IEEE Micro Robots and Teleoperators Workshop, 1987.

L. Federzoni, Fabrication de pièces sans usinage : le microPIM, p.7, 2006.

E. Felder, Procédés d'usinage -présentation, pp.0-01, 1997.

J. P. Focaracci and T. S. Yan, Pins for spotting nucleic acids. United States Patent, US 2005/0238542 A1), 2005.

S. P. Fodor, J. L. Read, M. C. Pirrung, L. Stryer, A. T. Lu et al., Light-directed, spatially addressable parallel chemical synthesis, Science, vol.251, issue.4995, pp.767-773, 1991.
DOI : 10.1126/science.1990438

Y. Fu, H. Du, W. Huang, S. Zhang, and M. Hu, TiNi-based thin films in MEMS applications: a review, Sensors and Actuators A: Physical, vol.112, issue.2-3, pp.395-408, 2004.
DOI : 10.1016/j.sna.2004.02.019

H. Funakudo, Shape Memory Alloys, 1987.

J. Georges, Frottement, usure et lubrification. Tribologie ou science des surfaces, CNRS Editions, 2000.

C. Giustranti, Puces à ADN -les « papiers » des tumeurs, Journal de l'Institut Curie, vol.60, issue.3, 2004.

T. Goldmann and J. S. Gonzalez, DNA-printing: utilization of a standard inkjet printer for the transfer of nucleic acids to solid supports, Journal of Biochemical and Biophysical Methods, vol.42, issue.3, pp.105-110, 2000.
DOI : 10.1016/S0165-022X(99)00049-4

T. Gomm, L. L. Howell, and R. H. Selfridge, In-plane linear displacement bistable microrelay, Journal of Micromechanics and Microengineering, vol.12, issue.3, pp.257-264, 2002.
DOI : 10.1088/0960-1317/12/3/310

G. Grills, C. Griffin, K. Lilley, A. Massimi, Y. Bao et al., The state of the art of microarray analysis : A profile of microarray laboratories, 1999.

H. T. Guckel, T. Earles, J. Klein, J. D. Zook, and T. Ohnstein, Electromagnetic linear actuators with inductive position sensing, Sensors and Actuators A: Physical, vol.53, issue.1-3, pp.386-391, 1996.
DOI : 10.1016/0924-4247(96)01137-5

]. G. Guénin, Alliages à mémoire de forme, p.1, 1996.

B. B. Haab, Rotary multiplexed microarrayer and method for production of microarrays, World Intellectual Property Organisation, issue.02, 2002.

B. B. Haab, Multiplexed cartesian-based split-platter microarrayer and method for production of microarrays, World Intellectual Property Organisation, p.27, 2003.

Y. Haga, W. Makishi, K. Iwami, K. Totsu, K. Nakamura et al., Dynamic Braille display using SMA coil actuator and magnetic latch, Sensors and Actuators A: Physical, vol.119, issue.2, pp.316-322, 2005.
DOI : 10.1016/j.sna.2004.10.001

Y. Haga, M. Masayoshi, and S. Maeda, Bending, torsional and extending active catheter assembled using electroplating, Proceedings IEEE Thirteenth Annual International Conference on Micro Electro Mechanical Systems (Cat. No.00CH36308), pp.181-186, 2000.
DOI : 10.1109/MEMSYS.2000.838513

Y. Haga, M. Mizushima, and T. Matsunaga, Medical and welfare applications of shape memory alloy microcoil actuators, Smart Materials and Structures, vol.14, issue.5, pp.266-272, 2005.
DOI : 10.1088/0964-1726/14/5/015

P. C. Hall, Methods of promoting solder wetting on nitinol. SMST-97 : The Second International Conference on Shape Memory and Superelastic Technologies, pp.125-130, 1997.

T. M. Harris, A. Massimi, and G. Childs, Injecting new ideas into microarray printing, Nature Biotechnology, vol.17, issue.4, pp.384-385, 2000.
DOI : 10.1038/13664

H. Hashimoto, K. Nakamura, H. Takase, T. Okamoto, and N. Yamamoto, Quantitative TOF-SIMS imaging of DNA microarrays produced by bubble jet printing technique and the role of TOF-SIMS in life science industry, Applied Surface Science, vol.231, issue.232, pp.231-232385, 2004.
DOI : 10.1016/j.apsusc.2004.03.106

M. Hashimoto, M. Takeda, H. Sagawa, I. Chiba, and K. Sato, Application of shape memory alloy to robotic actuators, Journal of robotic Systems, vol.2, issue.1, pp.3-25, 1985.

J. K. Haslam and J. R. Andrews, Pin holder for a microarraying apparatus, European Patent Application, 2003.

S. Hata, T. Kato, T. Fukushige, and A. Shimokohbe, Integrated conical spring linear actuator, Microelectronic Engineering, pp.67-68574, 2003.

R. C. Haushalter and X. Sun, Microfabricated spotting apparatus for producing low cost microarrays. United States Patent Application Publication, 2003.

S. Henein, Conception des guidages flexibles, Presses Polytechniques et Universitaires Romandes, 2001.

S. Hirose, K. Ikuta, K. Sato, and Y. Umetani, Several considerations on design of sma actuator, Proceedings of the International Conference on Martensitic Transformations, pp.1047-1052, 1986.

A. J. Holloway, R. K. Van-laar, R. W. Tothill, and D. D. Bowtell, Options available???from start to finish???for obtaining data from DNA microarrays II, Nature Genetics, vol.32, issue.Supp, pp.481-489, 2002.
DOI : 10.1038/ng1030

P. D. Honkanen, T. J. Woolaver, E. D. Mckenzie, D. P. Bradbury, and M. R. Jones, High throughtput microarray spotting system and method. United States Patent Application Publication, A1), 2004.

L. L. Howell, Compliant Mechanisms, 2001.

D. Huang and E. S. Kim, Micromachined acoustic-wave liquid ejector, Journal of Microelectromechanical Systems, vol.10, issue.3, pp.442-449, 2001.
DOI : 10.1109/84.946804

W. Huang, On the selection of shape memory alloys for actuators, Materials & Design, vol.23, issue.1, pp.11-19, 2002.
DOI : 10.1016/S0261-3069(01)00039-5

W. M. Huang, Q. Y. Liu, L. M. He, and J. H. Yeo, Micro NiTi???Si cantilever with three stable positions, Sensors and Actuators A: Physical, vol.114, issue.1, pp.118-122, 2004.
DOI : 10.1016/j.sna.2004.02.027

J. E. Huber, N. A. Fleck, and M. F. Ashby, The selection of mechanical actuators based on performance indices, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.453, issue.1965, pp.4532185-2205, 1965.
DOI : 10.1098/rspa.1997.0117

J. V. Humbeeck, Non-medical applications of shape memory alloys, Materials Science and Engineering: A, vol.273, issue.275, pp.273-275134, 1999.
DOI : 10.1016/S0921-5093(99)00293-2

I. Hwang, Y. Shim, and J. Lee, Modeling and experimental characterization of the chevron-type bi-stable microactuator, Journal of Micromechanics and Microengineering, vol.13, issue.6, pp.948-954, 2003.
DOI : 10.1088/0960-1317/13/6/318

A. Ikai, K. Kimura, and H. Tobushi, TIG Welding and Shape Memory Effect of TiNi Shape Memory Alloy, Journal of Intelligent Material Systems and Structures, vol.35, issue.3, pp.646-655, 1996.
DOI : 10.1007/BF01129028

K. Ikuta, Micro/miniature shape memory alloy actuator, Proc. of IEEE International Conference on Robotics and Automation, pp.2156-2161, 1990.

. Iso, Norme internationale 230-2 code d'essai des machines outils. Association française de normalisation -Afnor, pp.230-232

B. D. Jensen, M. B. Parkinson, K. Kurabayashi, L. L. Howell, and M. S. Baker, Design optimization of a fully-compliant bistable micro-mechanism, Proceedings of 2001 ASME International Mechanical Engineering Congress and Exposition, 2001.

R. V. Jones, Some use of elasticity in instrument design Conception et réalisation d'une matrice de microéjecteur thermique adressable individuellement pour la fonctionnalisation de biopuce, Journal of scientific Instruments, vol.3987, pp.193-203, 1962.

H. Kahn, M. A. Huff, and A. H. Heuter, The TiNi shape-memory alloy and its applications for MEMS, Journal of Micromechanics and Microengineering, vol.8, issue.3, pp.213-221, 1998.
DOI : 10.1088/0960-1317/8/3/007

B. Kim, M. G. Lee, Y. P. Lee, Y. Kim, and G. H. Lee, An earthworm-like micro robot using shape memory alloy actuator. Sensors and actuators A, pp.429-437, 2005.

M. Kohl, B. Krevet, and E. Just, SMA microgripper system. Sensors and Actuators A, pp.97-98646, 2002.
DOI : 10.1007/978-3-642-59497-7_169

M. Kohl and K. D. Skrobanek, Linear microactuators based on the shape memory effect, Sensors and Actuators A: Physical, vol.70, issue.1-2, pp.104-111, 1998.
DOI : 10.1016/S0924-4247(98)00121-6

T. Kohlmeier, V. Seidemann, S. Büttgenbach, and H. H. Gatzen, An investigation on technologies to fabricate microcoils for miniaturized actuator systems, Microsystem Technologies, vol.10, issue.3, pp.175-184, 2004.
DOI : 10.1007/s00542-003-0362-3

S. Kota, Compliant systems using monolithic mechanisms, Smart Materials Bulletin, vol.2001, issue.3, pp.7-10, 2001.
DOI : 10.1016/S1471-3918(01)80002-2

P. Krulevitch, A. P. Lee, P. B. Ramsey, J. C. Trevino, J. Hamilton et al., Thin film shape memory alloy microactuators, Journal of Microelectromechanical Systems, vol.5, issue.4, pp.270-282, 1996.
DOI : 10.1109/84.546407

E. Lander, Array of hope, Nature Genetics, vol.21, pp.3-4, 1999.
DOI : 10.1038/4427

G. K. Lau, H. Du, and M. K. Lim, Use of functional specifications as objective functions in topological optimization of compliant mechanism, Computer Methods in Applied Mechanics and Engineering, vol.190, issue.34, pp.4421-4433, 2001.
DOI : 10.1016/S0045-7825(00)00325-X

C. Lebreton, Alliages à mémoire de forme de type nickel titane, 2004.

N. Ledermann, P. Muralt, J. Baborowski, S. Gentil, K. Mukati et al., { 1 0 0}-textured, piezoelectric Pb(Zr x , Ti 1?x )O 3 thin films for MEMS : integration, deposition and properties, Sensors and Actuators A, pp.162-170, 2003.

P. Lee and H. J. Hudson, La puce ?? ADN en m??decine et en science., m??decine/sciences, vol.16, issue.1, pp.43-49, 2000.
DOI : 10.4267/10608/1500

Y. Lee and M. Mrksich, Protein chips: from concept to practice, Trends in Biotechnology, vol.20, issue.12, pp.14-18, 2002.
DOI : 10.1016/S1471-1931(02)00200-8

Y. F. Leung, Looking for a microarrayer

Y. F. Leung and C. P. Pang, All aboard the chip!, Trends in Biotechnology, vol.19, issue.11, pp.430-431, 2001.
DOI : 10.1016/S0167-7799(01)01771-1

S. Li and S. Chen, Analytical analysis of a circular PZT actuator for valveless micropumps, Sensors and Actuators A: Physical, vol.104, issue.2, pp.151-161, 2003.
DOI : 10.1016/S0924-4247(03)00006-2

W. Lin, Les puces à ADN sur lames de verre : principes et méthodes de confection, d'application expérimentale et d'analyse des données, Extraits du mémoire de la thèse de doctorat : " Applications de la technologie des puces à ADN à l'étude de la différentiation méiotique et des mécanismes de recombination chez la levure Saccharomyces cerevisiae, 2004.

R. J. Lipshurtz, S. P. Fodor, T. R. Gingeras, and D. J. Lockhart, High density synthetic oligonucleotide arrays, Nature Genetics, vol.21, pp.20-24, 1999.
DOI : 10.1038/4447

C. Liu, Micromachined magnetic actuators using electroplated permalloy, IEEE Transactions on Magnetics, vol.35, issue.3, pp.1976-1985, 1999.

S. Liu and J. Yen, A HEXAPOD ROBOT BASED ON SHAPE MEMORY ALLOY ACTUATORS, IFAC Proceedings Volumes, vol.39, issue.16, pp.689-693, 2006.
DOI : 10.3182/20060912-3-DE-2911.00120

N. Lobontiu, Compliant Mechanisms : Design of Flexure Hinges, CRC, 2002.
DOI : 10.1201/9781420040272

M. F. Lopez and M. G. , Protein micro- and macroarrays: digitizing the proteome, Journal of Chromatography B, vol.787, issue.1, pp.19-27, 2003.
DOI : 10.1016/S1570-0232(02)00336-7

N. Ma, G. Song, and H. Lee, Position control of shape memory alloy actuators with internal electrical resistance feedback using neural networks, Smart Materials and Structures, vol.13, issue.4, pp.777-783, 2004.
DOI : 10.1088/0964-1726/13/4/015

E. Makino, T. Mitsuya, and T. Shibata, Fabrication of TiNi shape memory micropump, Sensors and Actuators A: Physical, vol.88, issue.3, pp.256-262, 2001.
DOI : 10.1016/S0924-4247(00)00522-7

J. M. Maloney, D. S. Schreiber, and D. L. De-voe, Large-force electrothermal linear micromotors, Journal of Micromechanics and Microengineering, vol.14, issue.2, pp.226-234, 2004.
DOI : 10.1088/0960-1317/14/2/009

R. S. Martinsky, Microarray printing device insluding printing pins with flat tips and exterior channel and method of manufacture. United States Patent, 2000.

K. Maute and D. M. , Reliability-based design of MEMS mechanisms by topology optimization, Computers & Structures, vol.81, issue.8-11, pp.813-824, 2003.
DOI : 10.1016/S0045-7949(03)00008-7

E. Mornet, ADN, les 50??ans de la double h??lice??: du concept d???hybridation mol??culaire aux biopuces, Gyn??cologie Obst??trique & Fertilit??, vol.31, issue.11, pp.895-899, 2003.
DOI : 10.1016/j.gyobfe.2003.06.001

V. N. Morozov and T. Y. Morozova, Electrospray Deposition as a Method for Mass Fabrication of Mono- and Multicomponent Microarrays of Biological and Biologically Active Substances, Analytical Chemistry, vol.71, issue.15, pp.3110-3117, 1999.
DOI : 10.1021/ac981412h

T. Moulton and G. K. Ananthasuresh, Micromechanical devices with embedded electro-thermal-compliant actuation, Sensors and Actuators A: Physical, vol.90, issue.1-2, pp.38-48, 2001.
DOI : 10.1016/S0924-4247(00)00563-X

R. Mukherjee, T. F. Christian, and R. A. Thiel, An actuation system for the control of multiple sma actuator. Sensor and Actuators A, pp.185-192, 1996.

H. Nakazawa, Principles of Precision Engineering, 1994.

T. Nakazawa and A. Iimura, Microarraying head and microarrayer. United States Patent, 2002.

D. Niarchos, Magnetic MEMS: key issues and some applications, Sensors and Actuators A: Physical, vol.106, issue.1-3, pp.255-262, 2003.
DOI : 10.1016/S0924-4247(03)00179-1

T. Okamoto, T. Suzuki, and N. Yamamoto, Microarray fabrication with covalent attachment of DNA using Bubble Jet technology, Nature Biotechnology, vol.7, issue.4, pp.438-441, 2000.
DOI : 10.1248/cpb.29.1130

J. W. Overbeck, P. T. Flowers, J. I. Montagu, M. L. Mace, and P. Honkanen, Depositing fluid specimens on substrates, resulting ordered arrays, techniques for deposition af arrays, pp.846-847, 2001.

S. Paineau, P. Andreucci, and C. Schaffnit, Microsystèmes : applications et mises en oeuvre, pp.90-92, 2005.

J. J. Parise, L. L. Howell, and S. P. Magleby, Ortho-planar linear-motion springs. Mechanisms and machine theory, pp.1281-1299, 2001.
DOI : 10.1016/s0094-114x(01)00051-9

H. Park, H. Kim, J. Ahn, G. Song, G. Oh et al., Spotting device for fabricating microarrays of biological samples and spotting pin inserted therein, p.702, 2002.

P. J. Park, Y. A. Cao, S. Y. Lee, J. Kim, M. S. Chang et al., Current issues for DNA microarrays: platform comparison, double linear amplification, and universal RNA reference, Journal of Biotechnology, vol.112, issue.3, pp.225-245, 2004.
DOI : 10.1016/j.jbiotec.2004.05.006

E. Patoor and M. Berveiller, Technologie des alliages à mémoire de forme (Comportement mécanique et mise en oeuvre), 1994.

J. Peirs, D. Reynaerts, and H. Van-brussel, Scale effects and thermal considerations for micro-actuators, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146), pp.1516-1521, 1998.
DOI : 10.1109/ROBOT.1998.677333

J. Peirs, D. Reynaerts, and H. Van-brussel, Design of miniature parallel manipulators for integration in a self-propelling endoscope, Sensors and Actuators A: Physical, vol.85, issue.1-3, pp.409-417, 2000.
DOI : 10.1016/S0924-4247(00)00319-8

J. Peirs, D. Reynaerts, and H. Van-brussel, The 'true' power of SMA microactuation, Proc. of Micromechanics Europe Workshop, pp.217-220, 2001.

J. Piers, D. Reynaerts, and H. Van-brussel, A retrospective evalution of sma microactuation, 8th International Conference On New Actuators, pp.77-80, 2002.

R. D. Piner, J. Zhu, F. Xu, S. Hong, and C. A. Mirkin, "Dip-Pen" Nanolithography, Science, vol.16, issue.5402, p.661, 1999.
DOI : 10.1039/a827001z

M. Provence, Etude biocapteurs et biopuces, Synthèse publique de l'étude Ministère de l'Economie, des Finances et de l'Industrie, 2002.

J. Qiu, An Electrothermally-Actuated Bistable MEMS Relay for Power Applications, 2003.

J. Qiu, J. H. Lang, and A. H. Slocum, A centrally-clamped parallel-beam bistable MEMS mechanism, Technical Digest. MEMS 2001. 14th IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.01CH37090), pp.353-356, 2001.
DOI : 10.1109/MEMSYS.2001.906551

X. M. Qiu, M. G. Li, D. G. Sun, and W. H. Liu, Study on brazing of TiNi shape memory alloy with stainless steels, Journal of Materials Processing Technology, vol.176, issue.1-3, pp.8-12, 2006.
DOI : 10.1016/j.jmatprotec.2005.06.004

E. Quandt and A. Ludwig, Magnetostrictive actuation in microsystems, Sensors and Actuators A: Physical, vol.81, issue.1-3, pp.275-280, 2000.
DOI : 10.1016/S0924-4247(99)00173-9

W. P. Robbins, D. L. Polla, T. Tamaeawa, D. E. Glumac, and W. Tjhen, Design of linear-motion microactuators using piezoelectric thin films, Journal of Micromechanics and Microengineering, vol.1, issue.4, pp.247-252, 1991.
DOI : 10.1088/0960-1317/1/4/006

I. Roch, Potentialité d'intégration des alliages à mémoire de forme en film mince dans les microsystèmes, 2001.

A. Roncin, C. Shafai, and D. R. Swatek, Electric field sensor using electrostatic force deflection of a micro-spring supported membrane, Sensors and Actuators A: Physical, vol.123, issue.124, pp.123-124179, 2005.
DOI : 10.1016/j.sna.2005.02.018

S. D. Rose, Application of a novel microarraying system in genomic research and drug discovery, Journal of the Association for Laboratory Automation, vol.3, issue.3, pp.53-56, 1998.

R. A. Russell and R. B. Gordet, Improving the response of SMA actuators, Proceedings of 1995 IEEE International Conference on Robotics and Automation, pp.2299-2304, 1995.
DOI : 10.1109/ROBOT.1995.525604

E. Sarraute and I. Dufour, Micromoteurs électrostatiques à capacité variable, p.2, 1998.

M. Schena, D. Shalon, R. W. Davis, and P. O. Brown, Quantitative Monitoring of Gene Expression Patterns with a Complementary DNA Microarray, Science, vol.270, issue.5235, pp.467-470, 1995.
DOI : 10.1126/science.270.5235.467

W. K. Schomburg and C. Goll, Design optimization of bistable microdiaphragm valves, Sensors and Actuators A: Physical, vol.64, issue.3, pp.259-264, 1998.
DOI : 10.1016/S0924-4247(97)01612-9

F. Sérusclat, Rapport sur la génomique et l'informatique : l'impact sur les thérapies et l'industrie pharmaceutique, 1999.

D. D. Shin, K. P. Mohanchandra, and G. P. Carman, Development of hydraulic linear actuator using thin film SMA, Sensors and Actuators A: Physical, vol.119, issue.1, pp.151-156, 2005.
DOI : 10.1016/j.sna.2004.01.025

D. D. Shin, D. Lee, K. P. Mohanchandra, and G. P. Carman, Thin film NiTi microthermostat array. Sensors and actuators A, pp.130-13137, 2006.

D. D. Shoemaker and P. S. Linsley, Recent developments in DNA microarrays, Current Opinion in Microbiology, vol.5, issue.3, pp.334-337, 2002.
DOI : 10.1016/S1369-5274(02)00327-2

A. H. Slocum, Precision Machine Design, 1992.

S. T. Smith, Flexure : Elements of elastic Mechansisms, 2000.

S. T. Smith and D. G. Chetwynd, Foundations of Ultraprecision Mechanism Design, 1992.

S. T. Smith and R. M. Seugling, Sensor and actuator considerations for precision, small machines. Precision engineering, pp.245-264, 2006.

M. Soloviev, EuroChips : spot the difference ! DDT, pp.775-777, 2001.

P. Soularue and X. Gidrol, Puces à ADN, Recherche, vol.6, pp.1-10, 2002.

P. Stephani and Y. Iordanoff, Butées et paliers aérodynamiques, 1996.

P. H. Sydenham, Elastic design of fine mechanism in instruments, Journal of Physics E: Scientific Instruments, vol.17, issue.11, pp.922-930, 1984.
DOI : 10.1088/0022-3735/17/11/002

H. Taha, R. S. Marks, L. A. Gheber, I. Rousso, J. Newmann et al., Protein printing with an atomic force sensing nanofountainpen, Applied Physics Letters, vol.83, issue.5, pp.1041-1043, 2003.
DOI : 10.1021/ja026816c

S. Takeuchi and I. Shimoyama, A three-dimensional shape memory alloy microelectrode with clipping structure for insect neural recording, Journal of Microelectromechanical Systems, vol.9, issue.1, pp.24-31, 2000.
DOI : 10.1109/84.825773

P. M. Taylor, A. Moser, and A. Creed, A sixty-four element tactile display using shape memory alloy wires, Displays, vol.18, issue.3, pp.163-168, 1998.
DOI : 10.1016/S0141-9382(98)00017-1

A. Thompson, S. Lucchini, and J. C. Hinton, It's easy to build your own microarrayer ! Trends in Microtechnology, pp.154-156, 2001.

N. Tirole, D. Hauden, P. Blind, M. Froelicher, and L. Gaudriot, Three-dimensional silicon electrostatic linear microactuator, Sensors and Actuators A: Physical, vol.48, issue.2, pp.145-150, 1995.
DOI : 10.1016/0924-4247(95)00991-4

H. Tobushi and K. Tanaka, Deformation of a shape memory alloy helical spring, JSME International Journal, vol.34, issue.1, pp.83-89, 1991.

W. Trylinski, Fine mechanisms and precision instruments : Principles of design, 1971.

M. Vangboy, An analytical analysis of a compressed bistable buckled beam, Sensors and Actuators A: Physical, vol.69, issue.3, pp.212-216, 1998.
DOI : 10.1016/S0924-4247(98)00097-1

M. Vangboy and Y. Backlund, A lateral symmetrically bistable buckled beam, Journal of Micromechanics and Microengineering, vol.8, issue.1, pp.29-32, 1998.
DOI : 10.1088/0960-1317/8/1/005

R. Velàzquez, E. Pissaloux, and M. Wiertlewski, A compact tactile display for the blind with shape memory alloys, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006., 2006.
DOI : 10.1109/ROBOT.2006.1642300

R. Velàzquez, E. Pissaloux, M. Hafez, and J. Szewczyk, A low-cost highlyportable tactile display based on shape memory alloy micro-actuators, IEEE International Conference on Virtual Environments, Human-Computer Interfaces and Measurement Systems, Giardini Naxos, 2005.

S. Venanzi, P. Giesen, and V. Parenti-castelli, A novel technique for position analysis of planar compliant mechanisms. Mechanism and machine, 2005.

S. Venkatasubbarao, Microarrays ??? status and prospects, Trends in Biotechnology, vol.22, issue.12, pp.630-637, 2004.
DOI : 10.1016/j.tibtech.2004.10.008

M. Vitasse, G. Abba, and A. Eberhardt, Développement d'une tête d'impression haute densité pour la réalisation de biopuces, Journées scientifiques du 7 ième Forum LABO & BIOTECH, 2006.

M. Vitasse, G. Abba, and A. Eberhardt, High productivity print head for biochip microarrayer based on shape memory alloy micro-actuator, IARP workshop on Micro & Nano Robotics, 2006.

M. Vitasse, G. Abba, and A. Eberhardt, Conception de micro-guidages compliants pour les têtes d'impression haute densité dédiées à la réalisation de puces à ADN. 17 ième Congrès Français de Mécanique, p.438, 2005.

M. Vitasse, G. Abba, and A. Eberhardt, COMPLIANT MICRO-MECHANISM DESIGN FOR BIOCHIP MICROARRAYER PRINT HEAD, 4th IFAC-Symposium on Mechatronic Systems, 2006.
DOI : 10.3182/20060912-3-DE-2911.00161

B. Winzek, S. Schmitz, H. Rumpf, T. Sterzl, R. Hassdorf et al., Recent developments in shape memory thin film technology, Materials Science and Engineering: A, vol.378, issue.1-2, pp.40-46, 2004.
DOI : 10.1016/j.msea.2003.09.105

R. H. Wolf and A. H. Heuer, TiNi (shape memory) films silicon for MEMS applications, Journal of Microelectromechanical Systems, vol.4, issue.4, pp.206-212, 1995.
DOI : 10.1109/84.475547

J. R. Yaeger, Engineering Aspects of Shape Memory Alloys, chapter Electrical Actuators alloy selection, processing and evaluation, pp.219-233, 1990.

T. Y. Yang, R. K. Shiue, and S. K. Wu, Infrared brazing of Ti50Ni50 shape memory alloy using pure Cu and Ti???15Cu???15Ni foils, Intermetallics, vol.12, issue.12, pp.1285-1292, 2004.
DOI : 10.1016/j.intermet.2004.03.020

O. Yogi, T. Kawakami, M. Yamauchi, J. Y. Ye, and M. Ishikawa, On-Demand Droplet Spotter for Preparing Pico- to Femtoliter Droplets on Surfaces, Analytical Chemistry, vol.73, issue.8, pp.731896-1902, 2001.
DOI : 10.1021/ac0012039

J. Yonnet, Paliers et butées magnétiques passifs, pp.568-573, 2002.

G. Zambelli and L. Vincent, Matériaux et contacts, une approche tribologique, Presses Polytechniques Universitaires Romandes, 1998.

H. Zhu and M. Snyder, Protein chip technology, Current Opinion in Chemical Biology, vol.7, issue.1, pp.55-63, 2003.
DOI : 10.1016/S1367-5931(02)00005-4

E. Zubritsky, Spotting a microarray system. Modern Drug Discovery, pp.59-71, 2001.