J. Aboudi, Damage in composites???Modeling of imperfect bonding, Composites Science and Technology, vol.28, issue.2, pp.103-128, 1987.
DOI : 10.1016/0266-3538(87)90093-5

M. A. Adams and G. T. Murray, Direct Observations of Grain???Boundary Sliding in Bi???Crystals of Sodium Chloride and Magnesia, Journal of Applied Physics, vol.88, issue.6, pp.2126-2131, 1962.
DOI : 10.1016/0001-6160(56)90171-7

L. Anand and M. Kothari, A computational procedure for rate-independent crystal plasticity, Journal of the Mechanics and Physics of Solids, vol.44, issue.4, pp.525-558, 1996.
DOI : 10.1016/0022-5096(96)00001-4

J. J. Arata and A. Needleman, Effect of plasticity on dynamic crack growth across an interface, International Journal of Fracture, vol.94, issue.4, pp.383-399, 1998.
DOI : 10.1023/A:1007538925787

E. Arzt, Size effects in materials due to microstructural and dimensional constraints: a comparative review, Acta Materialia, vol.46, issue.16, pp.5611-5626, 1998.
DOI : 10.1016/S1359-6454(98)00231-6

R. J. Asaro and A. Needleman, Texture development and strain hardening in rate dependent polycrystals, Acta Metallurgica. Overview, issue.42336, pp.923-953, 1985.

R. J. Asaro and S. Suresh, Mechanistic models for the activation volume and rate sensitivity in metals with nanocrystalline grains and nano-scale twins, Acta Materialia, vol.53, issue.12, pp.3369-3382, 2005.
DOI : 10.1016/j.actamat.2005.03.047

M. F. Ashby, The deformation of plastically non-homogeneous materials, Philosophical Magazine, vol.245, issue.170, pp.399-424, 1970.
DOI : 10.1016/0001-6160(64)90034-3

G. I. Barrenblatt, The formation of equilibrium cracks in brittle fracture. General ideas and hypothesis. Axially-smmetric cracks, Prikl. Matem. I mekham, vol.23, p.434, 1959.

M. Berveiller and A. Zaoui, An extension of the self-consistent scheme to plastically-flowing polycrystals, Journal of the Mechanics and Physics of Solids, vol.26, issue.5-6, pp.325-344, 1979.
DOI : 10.1016/0022-5096(78)90003-0

S. Benkassem and M. Cherkaoui, Propriétes mécaniques et modélisation multiechelle des nanomatériaux" XVII e Congrès Français de Mécanique-Troyes, 2005.

S. Benkassem, L. Capolungo, M. Cherkaoui, and J. Qu, Mechanical properties and multi-scale modeling of nanocrystalline materials, Acta Materialia, vol.55, issue.10, pp.3563-3572, 2007.
DOI : 10.1016/j.actamat.2007.02.010

Y. Benveniste and G. W. Milton, New exact results for the effective electric, elastic, piezoelectric and other properties of composite ellipsoid assemblages, Journal of the Mechanics and Physics of Solids, vol.51, issue.10, pp.1773-1813, 2003.
DOI : 10.1016/S0022-5096(03)00074-7

Y. Benveniste, A new approach to the application of Mori-Tanaka's theory in composite materials, Mechanics of Materials, vol.6, issue.2, pp.147-157, 1987.
DOI : 10.1016/0167-6636(87)90005-6

E. Bitzek and P. Gumbsch, Dynamic aspects of dislocation motion: atomistic simulations, Materials Science and Engineering: A, vol.400, issue.401, pp.40-44, 2005.
DOI : 10.1016/j.msea.2005.03.047

. R. Bohn, T. Klassen, and R. Bormann, Room temperature mechanical behavior of silicon-doped TiAl alloys with grain sizes in the nano- and submicron-range, Acta Materialia, vol.49, issue.2, pp.299-311, 2001.
DOI : 10.1016/S1359-6454(00)00312-8

J. Brincker and G. W. Scherer, Sol-gel science, The physics and chemistry of sol-gel processing, 1990.

M. Büttiker, A. Prêtre, and H. Thomas, Admittance of small conductors, Physical Review Letters, vol.45, issue.3
DOI : 10.1103/PhysRevB.45.3807

G. T. Camacho and M. Ortiz, Computational modelling of impact damage in brittle materials, International Journal of Solids and Structures, vol.33, issue.20-22, pp.2899-2938, 1996.
DOI : 10.1016/0020-7683(95)00255-3

L. Capolungo, C. Jochum, and M. Et-cherkaoui, Homogenization method for strength and inelastic behavior of nanocrystalline materials, International Journal of Plasticity, vol.21, issue.1, pp.67-82, 2004.
DOI : 10.1016/j.ijplas.2004.02.002

L. Capolungo, M. Cherkaoui, and J. Et-qu, On the elastic???viscoplastic behavior of nanocrystalline materials, International Journal of Plasticity, vol.23, issue.4, pp.561-591, 2006.
DOI : 10.1016/j.ijplas.2006.05.003

J. E. Carsley, J. Ning, W. W. Milligan, S. A. Hackney, and E. C. Aifantis, A simple, mixtures-based model for the grain size dependence of strength in nanophase metals, Nanostructured Materials, vol.5, issue.4, pp.441-448, 1995.
DOI : 10.1016/0965-9773(95)00257-F

Y. Champion and J. Bigot, Synthesis and structural analysis of aluminum nanocrystalline powders, Nanostructured Materials, vol.10, issue.7, p.1097, 1998.
DOI : 10.1016/S0965-9773(98)00149-4

M. Cherkaoui, Comportement thermoélastique global des composites à renforts enrobés:modélisation micromécanique et applications, Thèse de doctorat, 1995.

M. Cherkaoui, H. Sabar, and M. Berveiller, Micromechanical Approach of the Coated Inclusion Problem and Applications to Composite Materials, Journal of Engineering Materials and Technology, vol.116, issue.3, pp.274-278, 1994.
DOI : 10.1115/1.2904286

M. Cherkaoui, H. Sabar, and M. Berveiller, Elastic composites with coated reinforcements: A micromechanical approach for nonhomothetic topology, International Journal of Engineering Science, vol.33, issue.6, pp.33-829, 1995.
DOI : 10.1016/0020-7225(94)00108-V

S. Cheng, E. Ma, Y. M. Wang, L. J. Kecskes, K. M. Youssef et al., Tensile properties of in situ consolidated nanocrystalline Cu, Acta Materialia, vol.53, issue.5, pp.1521-1533, 2005.
DOI : 10.1016/j.actamat.2004.12.005

S. Cheng, J. A. Spencer, and W. W. Milligan, Strength and tension/compression asymmetry in nanostructured and ultrafine-grain metals, Acta Materialia, vol.51, issue.15, pp.51-4505, 2003.
DOI : 10.1016/S1359-6454(03)00286-6

C. Han, S. Han, I. Singh, and . Et-thierry-toupance, Micro-bead of nano-crystalline F-doped SnO2 as a sensitive hydrogen gas sensor, Sensors and Actuators B: Chemical, vol.109, issue.2, pp.264-269, 2005.
DOI : 10.1016/j.snb.2004.12.115

A. H. Chokshi, A. Rosen, J. Karch, and H. Gleiter, On the validity of the Hall Petch relationship in nanocrystalline materials. Sripta metal, pp.1676-1684, 1989.

R. M. Christensen and K. H. Lo, Solutions for effective shear properties in three phase sphere and cylinder models, Journal of the Mechanics and Physics of Solids, vol.27, issue.4, pp.315-330, 1979.
DOI : 10.1016/0022-5096(79)90032-2

R. Coble, A Model for Boundary Diffusion Controlled Creep in Polycrystalline Materials, Journal of Applied Physics, vol.34, issue.6, pp.1679-1682, 1963.
DOI : 10.1039/tf9605600697

H. Conrad and J. Narayan, Grain size softening in nanocrystalline TiN, International Journal of Refractory Metals and Hard Materials, vol.23, issue.4-6, pp.1025-1030, 2000.
DOI : 10.1016/j.ijrmhm.2005.04.016

F. Costanzo and D. H. Allen, A continuum thermodynamic analysis of cohesive zone models, International Journal of Engineering Science, vol.33, issue.15, pp.2197-2219, 1995.
DOI : 10.1016/0020-7225(95)00066-7

D. Torre, F. Van-swygenhoven, H. Victoria, and M. , Nanocrystalline electrodeposited Ni: microstructure and tensile properties, Acta Materialia, vol.50, issue.15, p.3957, 2002.
DOI : 10.1016/S1359-6454(02)00198-2

J. J. De-borst-rené, A. Remmers, and . Needleman, Mesh-independent discrete numerical representations of cohesive-zone models, Engineering Fracture Mechanics, vol.73, pp.160-177, 2006.

P. H. Dederichs and R. Zeller, Variational treatment of the elastic constants of disordered materials, Zeitschrift f??r Physik A Hadrons and nuclei, vol.11, issue.2, pp.103-116, 1973.
DOI : 10.1016/0022-5096(63)90036-X

P. M. Derlet, H. Van-swygenhoven, and A. Hasnaoui, Atomistic simulation of dislocation emission in nanosized grain boundaries, Philosophical Magazine, vol.634, issue.1, pp.3569-3575, 2003.
DOI : 10.1016/S1359-6454(01)00167-7

D. S. Dugdale, Yielding of steel sheets containing slits, Journal of the Mechanics and Physics of Solids, vol.8, issue.2, p.100, 1959.
DOI : 10.1016/0022-5096(60)90013-2

F. Ebrahimi, G. R. Bourne, M. S. Kelly, and T. E. Matthews, Mechanical properties of nanocrystalline nickel produced by electrodeposition, Nanostructured Materials, vol.11, issue.3, pp.343-350, 1999.
DOI : 10.1016/S0965-9773(99)00050-1

J. D. Eshelby, Elastic Inclusions and Inhomogeneities, Progress in Solid Mechanics
DOI : 10.1007/1-4020-4499-2_26

J. D. Eshelby, The determination of the elastic field of an ellipsoidal inclusion, and related problems, Proceedings of the Royal Society of, pp.376-396, 1957.

J. D. Eshelby, The determination of the elastic field of an ellipsoidal inclusion and related problems, Proc. R. Soc. Lond. A 241, pp.376-396, 1957.

Y. Estrin, Dislocation theory based constitutive modelling: foundations and applications, Journal of Materials Processing Technology, vol.80, issue.81, pp.33-39, 1998.
DOI : 10.1016/S0924-0136(98)00208-8

Y. Estrin and H. Mecking, A unified phenomenological description of work hardening and creep based on one-parameter models, Acta Metallurgica, vol.32, issue.1, pp.57-70, 1984.
DOI : 10.1016/0001-6160(84)90202-5

A. Farghalli, Y. Mohamed, and . Li, Creep and superplasticity in nanocrystalline materials: current understanding and future prospects, Materials Science and Engineering, vol.298, pp.1-15, 2001.

D. Farkas, A. Froseth, and H. Van-swygenhoven, Grain boundary migration during room temperature deformation of nanocrystalline Ni, Scripta Materialia, vol.55, issue.8, pp.695-698, 2006.
DOI : 10.1016/j.scriptamat.2006.06.032

O. Fassi-fihri, Le problème de la paire d'inclusions plastiques et hétérogènes dans une matrice anisotrope. Application à l'étude du comportement des matériaux composites et de la plasticité, Thèse de Doctorat d'état, 1985.

O. Fassi-fihri, A. Hihi, and M. Berveiller, Multiple site self consistent scheme, International Journal of Engineering Science, vol.27, issue.5
DOI : 10.1016/0020-7225(89)90002-5

H. J. Fecht, E. Hellstern, Z. Fu, and W. L. Johnson, Nanocrystalline metals prepared by high-energy ball milling, Metallurgical Transactions A, vol.330, issue.9, p.2333, 1990.
DOI : 10.1557/PROC-132-137

A. A. Fedorov, M. Yu, . Gutkin, and I. A. Ovid-'ko, Triple junction diffusion and plastic flow in fine-grained materials, Scripta Materialia. 47 pp, pp.51-55, 2002.
DOI : 10.1016/S1359-6462(02)00096-9

URL : http://www.ipme.ru/ipme/labs/ltdm/Fedorov02SMA.pdf

H. J. Frost and M. Ashby, Deformation Mécanisme Maps, 1982.

H. H. Fu, D. J. Benson, and A. Meyers, Analytical and computational description of effect of grain size on yield stress of metals, Acta Materialia, vol.49, issue.13, pp.2567-2582, 2001.
DOI : 10.1016/S1359-6454(01)00062-3

Y. H. Gao, W. D. Huang, J. W. Nix, and . Hutchinson, Mechanism-based strain gradient plasticity? I. Theory, Journal of the Mechanics and Physics of Solids, vol.47, issue.6, pp.1239-1263, 1999.
DOI : 10.1016/S0022-5096(98)00103-3

V. Y. Gertsman, M. Hoffmann, H. Gleiter, and R. Birringer, The study of grain size dependence of yield stress of copper for a wide grain size range, Acta Metallurgica et Materialia, vol.42, issue.10, pp.10-3539, 1994.
DOI : 10.1016/0956-7151(94)90486-3

F. Ghahremani, Effect of grain boundary sliding on anelasticity of polycrystals, International Journal of Solids and Structures, vol.16, issue.9, pp.825-845, 1980.
DOI : 10.1016/0020-7683(80)90052-9

R. C. Gifkins, Diffusional Creep Mechanisms, Journal of the American Ceramic Society, vol.50, issue.11, p.69, 1968.
DOI : 10.1016/0025-5416(67)90057-2

H. Gleiter, Nanostructured materials: basic concepts and microstructure, Acta Materialia, vol.48, issue.1
DOI : 10.1016/S1359-6454(99)00285-2

J. Gubicza, G. Krállics, I. Schiller, and D. Malgin, Evolution of the Microstructure of Al 6082 Alloy during Equal-Channel Angular Pressing'' Materials Science Forum Vols, pp.473-474, 2005.

Y. Gutkin, M. Ovid-'ko, I. A. Skiba, and N. V. , Transformations of grain boundaries due to disclination motion and emission of dislocation pairs, Materials Science and Engineering: A, vol.339, issue.1-2, pp.339-73, 2003.
DOI : 10.1016/S0921-5093(02)00107-7

J. Hadamard, Leçon sur la propagation des ondes et les équations de l'hydrodynamique, 1903.

K. H. Hahn, P. Padmanabhan, . Deformation, . Nanocrystalline, and . Materials, Plastic deformation of nanocrystalline materials, Nanostructured Materials, vol.9, issue.1-8, pp.603-606, 1997.
DOI : 10.1016/S0965-9773(97)00135-9

. N. Hamada, S. I. Sawada, and A. Oshiyama, New one-dimensional conductors: Graphitic microtubules, Physical Review Letters, vol.1, issue.10, p.1579, 1992.
DOI : 10.1103/PhysRevB.1.4747

B. Q. Han, J. Y. Huang, Y. T. Zhu, and E. J. Lavernia, Effect of strain rate on the ductility of a nanostructured aluminum alloy, Scripta Materialia, vol.54, issue.6, pp.1175-1180, 2006.
DOI : 10.1016/j.scriptamat.2005.11.035

S. Hao, B. Moran, W. K. Liu, and G. B. Olson, A hierarchical multi-physics model for design of high toughness steels, Journal of Computer-Aided Materials Design, vol.10, issue.2, pp.99-142, 2003.
DOI : 10.1023/B:JCAD.0000036813.66891.41

Z. Hashin, The Elastic Moduli of Heterogeneous Materials, Journal of Applied Mechanics, vol.29, issue.1, pp.143-150, 1962.
DOI : 10.1115/1.3636446

Z. Hashin, Theory of mechanical behaviour of heterogeneous media, Appl.Mech.Rev, vol.17, pp.1-9, 1964.

Z. Hashin, The Spherical Inclusion With Imperfect Interface, Journal of Applied Mechanics, vol.58, issue.2, pp.444-449, 1991.
DOI : 10.1115/1.2897205

E. Hellstern, H. J. Fecht, Z. Fu, and W. L. Johnson, Structural and thermodynamic properties of heavily mechanically deformed Ru and AlRu, Journal of Applied Physics, vol.36, issue.1, pp.305-310, 1989.
DOI : 10.1016/0001-6160(87)90038-1

A. V. Hershey, The elasticity of an isotropic aggregate of anisotropic cubic crystals, Trans

E. Hervé and A. Zaoui, Modelling the effective behavior of nonlinear matrix-inclusion composites, Eur.J.Mech.(A), vol.9, 1990.

R. Hill, Continuum micro-mechanics of elastoplastic polycrystals, Journal of the Mechanics and Physics of Solids, vol.13, issue.2, pp.89-101, 1965.
DOI : 10.1016/0022-5096(65)90023-2

R. Hill, A self-consistent mechanics of composite materials, Journal of the Mechanics and Physics of Solids, vol.13, issue.4, pp.213-222, 1965.
DOI : 10.1016/0022-5096(65)90010-4

R. Hill, Interfacial operators in the mechanics of composite media, Journal of the Mechanics and Physics of Solids, vol.31, issue.4, 1983.
DOI : 10.1016/0022-5096(83)90004-2

A. Hillerborg, M. Modeer, and P. E. Petersson, Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements, Cement and Concrete Research, vol.6, issue.6, p.773, 1976.
DOI : 10.1016/0008-8846(76)90007-7

R. Honeycombe, The plastic deformation of metals, 1984.

M. Hori and S. Nemat-nasser, Double-inclusion model and overall moduli of multi-phase composites, Mechanics of Materials, vol.14, issue.3, pp.189-206, 1993.
DOI : 10.1016/0167-6636(93)90066-Z

. J. Huang, S. Chen, Z. Wang, K. Kempa, Y. M. Wang et al., Superplastic carbon nanotubes, Nature, vol.297, issue.7074, p.281, 2006.
DOI : 10.1126/science.1060928

J. W. Hutchinson and A. G. Evans, Mechanics of materials: top-down approaches to fracture, Acta Materialia, vol.48, issue.1
DOI : 10.1016/S1359-6454(99)00291-8

J. W. Hutchinson, Bounds and Self-Consistent Estimates for Creep of Polycrystalline Materials, Proc. R. Soc. Lond. A 348, pp.101-127, 1976.
DOI : 10.1098/rspa.1976.0027

S. Iijima, Helical microtubules of graphitic carbon, Nature, vol.354, issue.6348, pp.56-64, 1991.
DOI : 10.1038/354056a0

I. Jasiuk, E. Tsuchida, and T. Mura, The sliding inclusion under shear, International Journal of Solids and Structures, vol.23, issue.10, pp.1373-1385, 1987.
DOI : 10.1016/0020-7683(87)90003-5

B. Jiang and G. J. Weng, A generalized self-consistent polycrystal model for the yield strength of nanocrystalline materials, Journal of the Mechanics and Physics of Solids, vol.52, issue.5, pp.1125-1149, 2004.
DOI : 10.1016/j.jmps.2003.09.002

J. Gong, Q. Chen, W. Fei, S. Et, and . Seal, Micromachined nanocrystalline SnO2 chemical gas sensors for electronic nose, Sensors and Actuators B: Chemical, vol.102, issue.1, pp.117-125, 2004.
DOI : 10.1016/j.snb.2004.02.055

H. S. Kim, Y. Estrin, and M. B. Bush, Plastic deformation behaviour of fine-grained materials, Acta Materialia, vol.48, issue.2, pp.493-504, 2000.
DOI : 10.1016/S1359-6454(99)00353-5

H. S. Kim, Y. Estrin, and . M. Bush, Constitutive modelling of strength and plasticity of nanocrystalline metallic materials, Materials Science and Engineering: A, vol.316, issue.1-2, pp.195-199, 2001.
DOI : 10.1016/S0921-5093(01)01246-1

H. S. Kim, M. H. Seo, . S. Et-hong, and . Hong, Plastic deformation analysis of metals during equal channel angular pressing, Journal of Materials Processing Technology, vol.113, issue.1-3, pp.622-626, 2001.
DOI : 10.1016/S0924-0136(01)00710-5

H. S. Kim and Y. Estrin, Phase mixture modeling of the strain rate dependent mechanical behavior of nanostructured materials, Acta Materialia, vol.53, issue.3, pp.765-772, 2005.
DOI : 10.1016/j.actamat.2004.10.028

P. A. Klein, D. J. Bammann, S. X. Mcfadden, B. R. Antoun, and J. W. Foulk, A mechanism-based themomechanical cohesive zone approach for modeling ductilefracture, US National Congress on Computational Mechanics VII, 2003.

P. Klein and H. Gao, Crack nucleation and growth as strain localization in a virtual-bond continuum, Engineering Fracture Mechanics, vol.61, issue.1, pp.21-48, 1998.
DOI : 10.1016/S0013-7944(98)00048-4

C. C. Koch, O. B. Cavin, C. G. Mckamey, and J. O. Scarbrough, by mechanical alloying, Applied Physics Letters, vol.236, issue.11, p.1017, 1983.
DOI : 10.1016/0001-6160(67)90060-0

URL : https://hal.archives-ouvertes.fr/jpa-00225244

C. C. Koch, Bulk behaviour of nanostructured materialsLaws for work hardening and low temerature creep, Transactions of the ASME, J. Eng. Mater, vol.98, pp.76-85, 1976.

U. F. Kocks, A. S. Argon, and M. F. Ashby, Thermodynamics and kinetics of slip, Progress in Materials Science, vol.19, pp.1-291, 1975.

D. A. Konstantinidis and E. C. Aifantis, On the ???Anomalous??? hardness of nanocrystalline materials, Nanostructured Materials, vol.10, issue.7, pp.1111-1118, 1998.
DOI : 10.1016/S0965-9773(98)00145-7

E. Kröner, Berechnung der elastischen Konstanten des Vielkristalls aus den Konstanten des Einskristalls, Z. Phys, p.151, 1958.

E. Kröner, Zur plastischen Verformung des Vielkristalls. Acta Metall, pp.155-161, 1961.

E. Kröner, Graded and perfect disorder in random media elasticity, Journal of Engineering Mechanics Division, vol.106, pp.889-914, 1980.

E. Kröner, Bounds for effective elastic moduli of disordered materials, Journal of the Mechanics and Physics of Solids, vol.25, issue.2, 1980.
DOI : 10.1016/0022-5096(77)90009-6

E. Kröner, Modified Green Functions in the Theory of Heterogeneous and/or Anisotropic Linearly Elastic Media, Micromechanics and Inhomogeneity, pp.197-211, 1989.
DOI : 10.1007/978-1-4613-8919-4_13

K. Kumar, S. Suresh, M. F. Chisholm, J. A. Horton, and P. Wang, Deformation of electrodeposited nanocrystalline nickel, Acta Materialia, vol.51, issue.2, pp.387-405, 2003.
DOI : 10.1016/S1359-6454(02)00421-4

K. Kumar, S. Van-swygenhoven, H. Suresh, and S. , Mechanical behavior of nanocrystalline metals and alloys11The Golden Jubilee Issue???Selected topics in Materials Science and Engineering: Past, Present and Future, edited by S. Suresh, Acta Materialia, vol.51, issue.19, pp.5743-5774, 2003.
DOI : 10.1016/j.actamat.2003.08.032

S. Lasalmonie and J. L. , Influence of grain size on the mechanical behaviour of some high strength materials, Journal of Materials Science, vol.11, issue.6, p.1837, 1986.
DOI : 10.1016/0001-6160(76)90104-8

M. Legros, B. Elliott, M. Rittner, J. Weertman, and K. Hemker, Microsample tensile testing of nanocrystalline metals. Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties, vol.80, issue.4, pp.1017-1026, 2000.

J. E. Lennard-jones, On the Determination of Molecular Fields. I. From the Variation of the Viscosity of a Gas with Temperature, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.106, issue.738, p.441, 1924.
DOI : 10.1098/rspa.1924.0081

P. Li, Y. Huang, and Y. , Microstructure and composition analysis of nanostructured materials using HREM and FEG-TEM " Micron 31, pp.581-586, 2000.

J. C. Li, Petch relation and grain boundary sources Transactions of the metallurgical society, AIME, vol.227, pp.239-247, 1963.

E. Ma, Consolidation and mechanical behaviour of nanophase iron alloy powders prepared by mechanical milling, Powder Metallurgy, vol.43, pp.306-310, 2000.

. J. Markmann, P. Bunzel, H. Rösner, K. W. Liu, K. A. Padmanabhan et al., Microstructure evolution during rolling of inert-gas condensed palladium, Scripta Materialia, vol.49, issue.7, pp.49-637, 2003.
DOI : 10.1016/S1359-6462(03)00401-9

R. A. Masumura, P. M. Hazzledine, and C. S. Pande, Yield stress of fine grained materials, Acta Materialia, vol.46, issue.13
DOI : 10.1016/S1359-6454(98)00150-5

M. A. Meyers and A. Ashworth, A model for the effect of grain size on the yield stress of metals, Philosophical Magazine A, vol.12, issue.5, p.737, 1982.
DOI : 10.1016/0001-6160(64)90112-9

Y. Mishin, D. Farkas, M. J. Mehl, and D. A. Papaconstantopoulos, calculations, Physical Review B, vol.70, issue.70, pp.3393-3407, 1999.
DOI : 10.1103/PhysRevB.54.4519

C. Molteni, Modelling grain boundary sliding from first principles Materials science forum, pp.11-17, 2003.
DOI : 10.4028/www.scientific.net/msf.447-448.11

R. C. Morris and J. , Disclination???dislocation model of metallic glass structures, Journal of Applied Physics, vol.10, issue.5, p.3250, 1979.
DOI : 10.1063/1.321764

T. Mura and R. Furuhashi, The Elastic Inclusion With a Sliding Interface, Journal of Applied Mechanics, vol.51, issue.2, pp.308-310, 1984.
DOI : 10.1115/1.3167617

L. E. Murr and E. Venkatesh, Contrast phenomena and the identification of grain boundary ledges, Metallography, vol.11, issue.1, pp.61-79, 1978.
DOI : 10.1016/0026-0800(78)90008-3

L. E. Murr, Strain-induced dislocation emission from grain boundaries in stainless steel, Materials Science and Engineering, vol.51, issue.1, pp.71-79, 1981.
DOI : 10.1016/0025-5416(81)90108-7

F. R. Nabarro, Report of a conference on the strength of solids (the physical society, pp.75-90, 1948.

N. Sirish, Deformation mechanisms at atomic scale: role of defects in thermomechanical behavior of materials, dissertation THE FLORIDA STATE UNIVERSITY, 2004.

H. Naziri, R. Pearce, M. Henderson-brown, and K. F. Hale, In situ superplasticity experiments in the 1 million volt electron microscope, Journal of Microscopy, vol.2, issue.1-2, pp.229-238, 1973.
DOI : 10.1016/0001-6160(54)90157-1

H. Naziri, R. Pearce, M. Henderson-brown, and K. F. Hale, Microstructural-mechanism relationship in the zinc-aluminum eutectoid superplastic alloy. Acta metall, pp.489-496, 1975.

A. Needleman, A Continuum Model for Void Nucleation by Inclusion Debonding, Journal of Applied Mechanics, vol.54, issue.3, pp.525-531, 1987.
DOI : 10.1115/1.3173064

A. Needleman, An analysis of decohesion along an imperfect interface, Int.J.Fract, vol.40, pp.21-40, 1990.

A. Needleman, Micromechanical modelling of interfacial decohesion, Ultramicroscopy, vol.40, issue.3, pp.203-214, 1992.
DOI : 10.1016/0304-3991(92)90117-3

S. Nemat-nasser and M. Taya, On effective moduli of an elastic body containing periodically distributed voids, Quarterly of Applied Mathematics, vol.39, issue.1, pp.187-188, 1985.
DOI : 10.1090/qam/99626

E. Nes, Modelling of work hardening and stress saturation in FCC metals, Progress in Materials Science, vol.41, issue.3, pp.129-193, 1997.
DOI : 10.1016/S0079-6425(97)00032-7

O. Nguyen and M. Ortiz, Coarse-graining and renormalization of atomistic binding relations and universal macroscopic cohesive behavior, Journal of the Mechanics and Physics of Solids, vol.50, issue.8, pp.1727-1741, 2002.
DOI : 10.1016/S0022-5096(01)00133-8

T. G. Nieh and J. Wadsworth, Hall-petch relation in nanocrystalline solids, Scripta Metallurgica et Materialia, vol.25, issue.4, pp.955-958, 1991.
DOI : 10.1016/0956-716X(91)90256-Z

T. G. Nieh, J. Wadsworth, and O. D. Sherby, Superplasticity in metals and ceramics, 1997.
DOI : 10.1017/CBO9780511525230

G. W. Nieman, J. R. Weertman, and R. W. Siegel, Mechanical behavior of nanocrystalline Cu and Pd, Journal of Materials Research, vol.64, issue.05, pp.1012-1027, 1991.
DOI : 10.1088/0370-1301/64/9/303

K. Niihara, The certinial memorial issue 99, p.974, 1991.

M. Ortiz and A. Pandolfi, Finite-deformation irreversible cohesive elements for three-dimensional crack-propagation analysis, International Journal for Numerical Methods in Engineering, vol.142, issue.9, pp.1267-1282, 1999.
DOI : 10.1007/BF00033830

G. Palumbo, S. J. Thorpe, and K. T. Aust, On the contribution of triple junctions to the structure and properties of nanocrystalline materials, Scripta Metallurgica et Materialia, vol.24, issue.7, pp.1347-1350, 1990.
DOI : 10.1016/0956-716X(90)90354-J

P. Shariat, B. Ramsevak, T. G. Vastavaa, and . Langdon, An evaluation of the roles of intercrystalline and interphase boundary sliding in two-phase superplastic alloys, Acta Metallurgica, vol.30, issue.1, pp.285-296, 1982.
DOI : 10.1016/0001-6160(82)90068-2

W. Qin, Z. Chen, P. Huang, and Y. Zhuang, Dislocation pileups in nanocrystalline materials, Journal of Alloys and Compounds, vol.289, issue.1-2, pp.285-288, 1999.
DOI : 10.1016/S0925-8388(99)00175-9

J. Qu, The effect of slightly weakened interfaces on the overall elastic properties of composite materials, Mechanics of Materials, vol.14, issue.4, pp.269-281, 1993.
DOI : 10.1016/0167-6636(93)90082-3

S. Ranganathan, R. Divakar, and V. S. Raghunatahn, Interface structures in nanocrystalline materials, Scripta Materialia, vol.44, issue.8-9, pp.1169-1174, 2001.
DOI : 10.1016/S1359-6462(01)00678-9

J. Rice, Dislocation nucleation from a crack tip: An analysis based on the Peierls concept, Journal of the Mechanics and Physics of Solids, vol.40, issue.2, p.239, 1992.
DOI : 10.1016/S0022-5096(05)80012-2

J. R. Rice and G. E. Beltz, The activation energy for dislocation nucleation at a crack, Journal of the Mechanics and Physics of Solids, vol.42, issue.2, pp.333-360, 1994.
DOI : 10.1016/0022-5096(94)90013-2

R. Feynman, There's Plenty of Room at the Bottom": An Invitation to Enter a New Field of Physics Allocution prononcée lors de la reunion annuelle de l, In Engineering and Science, pp.29-1959, 1960.

E. Sanders and W. , Elastic and tensile behaviour of nanocrystalline copper and palladium " . Acta mater 45, pp.4019-4025, 1997.

F. Sansoz and J. F. Molinari, Incidence of atom shuffling on the shear and decohesion behavior of a symmetric tilt grain boundary in copper, Scripta Materialia, vol.50, issue.10, pp.1283-1288, 2004.
DOI : 10.1016/j.scriptamat.2004.02.031

F. Sansoz and J. F. Molinari, Size and microstructure effects on the mechanical behavior of FCC bicrystals by quasicontinuum method, Thin Solid Films, vol.515, issue.6, pp.3158-3163, 2006.
DOI : 10.1016/j.tsf.2006.01.012

F. Sansoz and J. F. Molinari, Mechanical behavior of ?? tilt grain boundaries in nanoscale Cu and Al: A quasicontinuum study, Acta Materialia, vol.53, issue.7, pp.1931-1944, 2005.
DOI : 10.1016/j.actamat.2005.01.007

K. Scattergood, A modified model for hall-petch behavior in nanocrystalline materials, Scripta Metallurgica et Materialia, vol.27, issue.9, pp.1195-1200, 1992.
DOI : 10.1016/0956-716X(92)90598-9

. H. Schaefer, K. Reimann, W. Straub, F. Phillipp, H. Tanimoto et al., Interface structure studies by atomic resolution electron microscopy, order???disorder phenomena and atomic diffusion in gas-phase synthesized nanocrystalline solids, Materials Science and Engineering: A, vol.286, issue.1, pp.286-310, 2000.
DOI : 10.1016/S0921-5093(00)00659-6

. J. Schiotz, T. Vegge, D. Tolla, F. D. Jacobsen, and K. W. , Atomic-scale simulations of the mechanical deformation of nanocrystalline metals, Physical Review B, vol.9, issue.236, pp.971-983, 1999.
DOI : 10.1016/S0965-9773(97)00135-9

J. Schiotz, D. Tolla, D. Jacobsen, and K. , Softening of nanocrystalline metals at very small grain sizes, Nature, vol.391, issue.6667, pp.561-563, 1998.
DOI : 10.1038/35328

J. Schiotz and K. W. Jacobsen, A Maximum in the Strength of Nanocrystalline Copper, Science, vol.301, issue.5638, pp.1357-1366, 2003.
DOI : 10.1126/science.1086636

J. Schiotz, D. Tolla, F. D. , and K. J. , Softening of nanocrystalline metals at very small grain sizes, Nature, vol.391, issue.6667, p.561, 1998.
DOI : 10.1038/35328

C. A. Schuh, T. G. Nieh, and T. Yamakasi, Hall???Petch breakdown manifested in abrasive wear resistance of nanocrystalline nickel, Scripta Materialia, vol.46, issue.10, pp.735-740, 2002.
DOI : 10.1016/S1359-6462(02)00062-3

C. H. Shek, J. K. Lai, and G. M. Lin, Grain growth in nanocrystalline SnO 2 prepared by sol-gel route, Nanostruct. Mater, vol.7, issue.887, 1999.

T. D. Shen, C. C. Koch, T. Y. Tsui, G. Pharr, and M. , On the elastic moduli of nanocrystalline Fe, Cu, Ni, and Cu???Ni alloys prepared by mechanical milling/alloying, Journal of Materials Research, vol.233, issue.11, pp.2892-2896, 1995.
DOI : 10.1557/JMR.1990.1073

T. Shimokawa, A. Nakatani, and H. Kitagawa, Grain-size dependence of the relationship between intergranular and intragranular deformation of nanocrystalline Al by molecular dynamics simulations, Physical Review B, vol.51, issue.310, 2005.
DOI : 10.1080/01418619308222926

R. W. Siegel, Nanostructured Materials, 1993.
DOI : 10.1007/978-1-4615-2842-5_17

R. W. Siegel, Cluster-Assembled Nanophase Materials, Annual Review of Materials Science, vol.21, issue.1, pp.559-578, 1991.
DOI : 10.1146/annurev.ms.21.080191.003015

R. W. Siegel, What do we really know about the atomic-scale structures of nanophase materials?, Journal of Physics and Chemistry of Solids, vol.55, issue.10, pp.1097-1106, 1994.
DOI : 10.1016/0022-3697(94)90127-9

F. Spaepen, Acta metall, p.407, 1977.

D. E. Spearot, K. I. Jacob, and D. Mcdowell, Nucleation of dislocations from [001] bicrystal interfaces in aluminum, Acta Materialia, vol.53, issue.13, pp.3579-3589, 2005.
DOI : 10.1016/j.actamat.2005.04.012

D. E. Spearot, I. Karl, . Jacob, and D. L. Mcdowell, Non-local separation constitutive laws for interfaces and their relation to nanoscale simulations, Mechanics of Materials, vol.36, issue.9, pp.825-847, 2004.
DOI : 10.1016/j.mechmat.2003.08.002

D. E. Spearot, I. Karl, D. L. Jacob, and . Mcdowell, Dislocation nucleation from bicrystal interfaces with dissociated structure, International Journal of Plasticity, vol.23, issue.1, pp.143-160, 2007.
DOI : 10.1016/j.ijplas.2006.03.008

C. Suryanarayana, Mechanical alloying and milling, Progress in Materials Science, pp.1-184, 2001.
DOI : 10.4150/kpmi.2006.13.5.371

URL : http://www.ndsl.kr/soc_img/society/kpmi/BMOGBP/2006/v13n5s58/BMOGBP_2006_v13n5s58_371.pdf

R. Surayanarayana and R. Frey, Deformation, recovery, and recrystallization behavior of nanocrystalline copper produced from solution-phase synthesized nanoparticles, Journal of alloys and compounds, vol.11, pp.449-457, 1996.

C. Suryanarayana, D. Mukhopadhyay, S. N. Patankar, and F. H. Froes, Grain size effects in nanocrystalline materials, Journal of Materials Research, vol.49, issue.08, pp.2114-2118, 1992.
DOI : 10.1016/0956-716X(90)90354-J

H. V. Swygenhoven, M. Spaczer, D. Farkas, C. , and A. , The role of grain size and the presence of low and high angle grain boundaries in the deformation mechanism of nanophase Ni: A molecular dynamics computer simulation, Nanostructured Materials, vol.12, issue.1-4, pp.323-326, 1999.
DOI : 10.1016/S0965-9773(99)00127-0

H. V. Swygenhoven and A. Caro, Plastic behavior of nanophase metals studied by molecular dynamics, Physical Review B, vol.5, issue.238, p.11246, 1998.
DOI : 10.1023/A:1008663804495

H. V. Swygenhoven and A. Caro, Plastic behavior of nanophase Ni: A molecular dynamics computer simulation, Applied Physics Letters, vol.9, issue.12, p.1652, 1997.
DOI : 10.1016/0965-9773(95)00281-I

E. B. Tadmor, M. Ortiz, and R. Phillips, Quasicontinuum analysis of defects in solids, Philosophical Magazine A, vol.64, issue.6, p.1529, 1996.
DOI : 10.1088/0953-8984/2/24/004

V. L. Tellkamp and E. J. Lavernia, Processing and mechanical properties of nanocrystalline 5083 al alloy, Nanostructured Materials, vol.12, issue.1-4, pp.249-252, 1999.
DOI : 10.1016/S0965-9773(99)00110-5

V. Tvergaard and J. W. Hutchinson, The relation between crack growth resistance and fracture process parameters in elastic-plastic solids, Journal of the Mechanics and Physics of Solids, vol.40, issue.6, pp.1377-1397, 1992.
DOI : 10.1016/0022-5096(92)90020-3

C. Valiev, . Bordeaux, . Kapelski, and . Baudelet, The Hall-Petch relation in submicro-grained Al-1.5% Mg alloy, Scripta Metallurgica et Materialia, vol.27, issue.7, pp.855-860, 1992.
DOI : 10.1016/0956-716X(92)90405-4

R. Z. Valiev, R. K. Islamgaliev, and I. P. Semenova, Superplasticity in nanostructured materials: New challenges, Materials Science and Engineering: A, vol.463, issue.1-2, pp.2-7, 2006.
DOI : 10.1016/j.msea.2006.08.121

R. Z. Valiev, R. K. Islamgaliev, and I. V. Alexandrov, Bulk nanostructured materials from severe plastic deformation, Progress in Materials Science 45, pp.103-189, 2000.
DOI : 10.1016/S0079-6425(99)00007-9

H. Van-swygenhoven, M. Spaczer, A. Caro, and D. Farkas, Microscopic description of plasticity in computer generated metallic nanophase samples: a comparison between Cu and Ni, Acta Materialia, vol.47, issue.10, pp.3117-3126, 1999.
DOI : 10.1016/S1359-6454(99)00109-3

H. Van-swygenhoven, P. M. Derlet, and A. Hasnaoui, Atomic mechanism for dislocation emission from nanosized grain boundaries, Physical Review B, vol.51, issue.2, p.24101, 2002.
DOI : 10.1016/0025-5416(81)90108-7

N. Wang, Z. Wang, K. T. Aust, and U. Erb, Effect of grain size on mechanical properties of nanocrystalline materials, Acta Metallurgica et Materialia, vol.43, issue.2, pp.2519-528, 1995.
DOI : 10.1016/0956-7151(94)00253-E

N. Wang, Z. Wang, K. T. Aust, and U. Erb, Room temperature creep behavior of nanocrystalline nickel produced by an electrodeposition technique, Materials Science and Engineering: A, vol.237, issue.2, pp.150-158, 1997.
DOI : 10.1016/S0921-5093(97)00124-X

N. Wang, Z. Wang, K. T. Aust, and U. Erb, Effect of grain size on mechanical properties of nanocrystalline materials, Acta Metallurgica et Materialia, vol.43, issue.2, pp.519-528, 1995.
DOI : 10.1016/0956-7151(94)00253-E

G. F. Wang, X. Q. Feng, S. W. Yu, and C. W. Nan, Interface effects on effective elastic moduli of nanocrystalline materials, Materials Science and Engineering: A, vol.363, issue.1-2, pp.1-8, 2003.
DOI : 10.1016/S0921-5093(03)00253-3

L. J. Walpole, The Elastic Field of an Inclusion in an Anisotropic Medium, Proceedings of the Royal Society of, pp.270-289, 1967.
DOI : 10.1098/rspa.1967.0170

D. H. Warner, F. Sansoz, and J. F. Molinari, Atomistic based continuum investigation of plastic deformation in nanocrystalline copper, International Journal of Plasticity, vol.22, issue.4, pp.754-774, 2006.
DOI : 10.1016/j.ijplas.2005.04.014

J. R. Weertman, Hall-Petch strengthening in nanocrystalline metals, Materials Science and Engineering: A, vol.166, issue.1-2, pp.161-167, 1993.
DOI : 10.1016/0921-5093(93)90319-A

Q. Wei, S. Cheng, K. T. Ramesha, and E. Mab, Effect of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity and activation volume: fcc versus bcc metals, Materials Science and Engineering: A, vol.381, issue.1-2, pp.71-79, 2004.
DOI : 10.1016/j.msea.2004.03.064

Y. Wei and J. W. Hutchinson, Models of interface separation accompanied by plastic dissipation at multiple scales, International Journal of Fracture, vol.95, pp.1-17, 1999.
DOI : 10.1007/978-94-011-4659-3_1

Y. J. Wei and L. Anand, Grain-boundary sliding and separation in polycrystalline metals: application to nanocrystalline fcc metals, Journal of the Mechanics and Physics of Solids, vol.52, issue.11, pp.2587-2616, 2004.
DOI : 10.1016/j.jmps.2004.04.006

D. V. Wilson, Role of Grain Boundaries in the Discontinuous Yielding of Low-Carbon Steels, Metal Science Journal, vol.201, issue.36, p.40, 1967.
DOI : 10.1080/14786436008241198

G. T. Wong and D. M. Barnett, A dislocation method for solving 3-D crack and inclusion problems in linear elastic solids Fundamentals of Deformation and Fracture, pp.417-438, 1985.

Y. Wu, Z. Ling, and Z. Dong, Stress???strain fields and the effectiveness shear properties for three-phase composites with imperfect interface, International Journal of Solids and Structures, vol.37, issue.9, pp.1275-1292, 2000.
DOI : 10.1016/S0020-7683(98)00295-9

T. T. Wu, The effect of inclusion shape on the elastic moduli of a two-phase material, International Journal of Solids and Structures, vol.2, issue.1, pp.1-8, 1966.
DOI : 10.1016/0020-7683(66)90002-3

X. P. Xu and A. Needleman, Numerical simulations of fast crack growth in brittle solids, Journal of the Mechanics and Physics of Solids, vol.42, issue.9
DOI : 10.1016/0022-5096(94)90003-5

V. Yamakov, E. Saether, D. R. Phillips, and E. H. Glaessgen, Molecular-dynamics simulation-based cohesive zone representation of intergranular fracture processes in aluminum, Journal of the Mechanics and Physics of Solids, vol.54, issue.9, pp.1899-1928, 2006.
DOI : 10.1016/j.jmps.2006.03.004

W. M. Yin, S. H. Whang, R. Mirshams, and C. H. Xiao, Creep behavior of nanocrystalline nickel at 290 and 373 K, Materials Science and Engineering: A, vol.301, issue.1, pp.18-22, 2001.
DOI : 10.1016/S0921-5093(00)01385-X

X. Zhang, H. Wang, R. O. Scattergood, J. Narayan, C. C. Koch et al., Studies of deformation mechanisms in ultra-fine-grained and nanostructured Zn, Acta Materialia, vol.50, issue.19, p.4823, 2002.
DOI : 10.1016/S1359-6454(02)00349-X

J. Zhonghao, L. Jianshe, and B. Baudelet, A dislocation density approximation for the flow stress-grain size relation of polycrystals, Acta Metallurgica et Materialia, vol.43, issue.9, pp.3349-3360, 1995.

Y. Zhou, U. Erb, K. T. Aust, and G. Palumbo, The effects of triple junctions and grain boundaries on hardness and Young???s modulus in nanostructured Ni???P, Scripta Materialia, vol.48, issue.6, pp.825-830, 2003.
DOI : 10.1016/S1359-6462(02)00511-0

X. H. Zhu, J. E. Carsley, W. W. Milligan, E. C. Aifantis, and S. Meterialia, Annexes Annexes, p.721, 1997.