W. Reynolds, G. Shiflet, and G. Spanos, Aaronson, Mechanism of phase transformation in crystalline solids, Institute of Metals, Metallurgical and Materials Transactions A, vol.21, issue.6, pp.1343-1380, 1969.

H. I. Aaronson, G. R. Purdy, D. V. Malakhov, and W. T. Reynolds, Tests of the zener theory of the incomplete transformation phenomenon in Fe-C-Mo and related alloys, Scripta Materialia, vol.44, issue.10, pp.2425-2430, 2001.
DOI : 10.1016/S1359-6462(01)00916-2

F. Caballero and H. Bhadeshia, Very strong bainite, Current Opinion in Solid State and Materials Science, vol.8, issue.3-4, pp.251-257, 2004.
DOI : 10.1016/j.cossms.2004.09.005

F. Caballero, M. Miller, S. Babu, and C. Garciamateo, Atomic scale observations of bainite transformation in a high carbon high silicon steel, Acta Materialia, vol.55, issue.1, pp.381-390, 2007.
DOI : 10.1016/j.actamat.2006.08.033

F. Caballero, C. Garcia-mateo, J. Chao, M. Santofimia, C. Capdevila et al., Effects of Morphology and Stability of Retained Austenite on the Ductility of TRIP-aided Bainitic Steels, ISIJ International, vol.48, issue.9, pp.1256-1262, 2008.
DOI : 10.2355/isijinternational.48.1256

D. Edmonds, K. He, F. Rizzo, B. Decooman, D. Matlock et al., Materials Science and Engineering: A, 438-440, Materials Science and Engineering: A, vol.431, issue.12, pp.25-34, 2006.

]. A. Gourgues, H. M. Flower, and T. C. Lindley, Electron backscattering diffraction study of acicular ferrite, bainite, and martensite steel microstructures, Materials Science and Technology, vol.12, issue.1, pp.26-40, 2000.
DOI : 10.1016/0001-6160(67)90207-6

]. R. Hackenberg and G. J. Shiflet, A microanalysis study of the bainite reaction at the bay in Fe-C-Mo, 41st Mechanical Working and Steel Processing Conference Proceedings, pp.2131-2147, 1999.
DOI : 10.1016/S1359-6454(02)00562-1

R. F. Hehemann, Phase transformations, American Society for Metals, Metals Park, Acta Metallurgica et Materialia, issue.7, pp.41-1951, 1970.

E. Kozeschnik and H. K. Bhadeshia, Influence of silicon on cementite precipitation in steels, Materials Science and Technology, vol.8, issue.3, pp.343-347, 2008.
DOI : 10.1007/s11661-007-9160-3

G. Langford and M. Cohen, Calculation of cell-size strengthening of wire-drawn iron, Metallurgical and Materials Transactions B, vol.197, issue.5, pp.1478-1480, 1970.
DOI : 10.1007/BF02900287

G. Langford and M. Cohen, Microstructural analysis by high-voltage electron diffraction of severely drawn iron wires, Metallurgical Transactions A, vol.227, issue.4, pp.901-910, 1975.
DOI : 10.1179/095066072790137684

W. C. Leslie, I. Loginova, J. Ågren, and G. Amberg, PHYSICAL METALLURGY OF STEELS, Acta Materialia, issue.13, pp.52-4055, 1981.
DOI : 10.1016/B978-044489875-3/50022-3

S. K. Lubin-]-d, J. G. Matlock, and . Speer, Etude des mécanismes de la transformation de phase bainitique dans les aciers bas carbone, PhD, Mines Paritech, Mines Paritech, Microstructure and Texture in Steels and Other Materials, pp.185-205, 2009.

S. Morito, H. Tanaka, R. Konishi, T. Furuhara, and T. Maki, American Society for Metals, Hardenability of Alloy Steels, pp.51-1789, 1938.

S. Morito, X. Huang, T. Furuhara, T. Maki, and N. Hansen, The morphology and crystallography of lath martensite in alloy steels, Acta Materialia, vol.54, issue.19, pp.5323-5331, 2006.
DOI : 10.1016/j.actamat.2006.07.009

S. Mujahid and H. Bhadeshia, Partitioning of carbon from supersaturated ferrite plates, Acta Metallurgica et Materialia, vol.40, issue.2, pp.389-396, 1992.
DOI : 10.1016/0956-7151(92)90313-4

]. C. Nikhare, P. D. Hodgson, and M. Weiss, Necking and fracture of advanced high strength steels, Materials Science and Engineering: A, vol.528, issue.6, pp.3010-3013, 2011.
DOI : 10.1016/j.msea.2010.12.098

I. Pereloma, M. Timokhina, P. Miller, and . Hodgson, Three-dimensional atom probe analysis of solute distribution in thermomechanically processed TRIP steels, Acta Materialia, vol.55, issue.8, pp.2587-2598, 2007.
DOI : 10.1016/j.actamat.2006.12.001

A. Perlade, O. Bouaziz, and Q. Furnemont, A physically based model for TRIP-aided carbon steels behaviour, Materials Science and Engineering: A, vol.356, issue.1-2, pp.145-152, 2003.
DOI : 10.1016/S0921-5093(03)00121-7

K. Sugimoto, S. Nakano, T. Song, and . Kashima, Retained Austenite Characteristics and Stretch-flangeability of High-strength Low-alloy TRIP Type Bainitic Sheet Steels., ISIJ International, vol.42, issue.4, pp.450-455, 2002.
DOI : 10.2355/isijinternational.42.450

M. Takahashi and H. Bhadeshia, A Model for the Microstructure of Some Advanced Bainitic Steels, Materials Transactions, JIM, vol.32, issue.8, pp.689-696, 1991.
DOI : 10.2320/matertrans1989.32.689

]. X. Wang, B. X. Huang, L. Wang, and Y. H. Rong, Microstructure and Mechanical Properties of Microalloyed High-Strength Transformation-Induced Plasticity Steels, [WAS'35] G. Wassermann, Mitt. K.-Wilh.-Inst. Eisenforsch, pp.1-7, 1935.
DOI : 10.1016/j.msea.2006.02.133

]. J. Yang, H. Bhadeshia, S. Zajac, V. Schwinn, and K. Tacke, Advances in wellding science & technology, American Society of Metals, Materials Science Forum, pp.500-501, 1986.

]. S. Bohemen, M. Santofimia, and J. Sietsma, Experimental evidence for bainite formation below Ms in Fe???0.66C, Bainite in steels Second edition, IOM Communications Ltd, pp.488-491, 2001.
DOI : 10.1016/j.scriptamat.2007.10.045

A. Royer, P. Bastie, M. Veron, A. Royer, P. Bastie et al., High energy X-ray diffraction measurement of the superstructure reflection (100) for a creep deformed AM1 single crystal superalloy specimen, Scripta Materialia, vol.37, issue.8, pp.46-5357, 1997.
DOI : 10.1016/S1359-6462(97)00220-0

T. Sugimoto, J. Iida, T. Sakaguchi, and . Kashima, Retained Austenite Characteristics and Tensile Properties in a TRIP Type Bainitic Sheet Steel., ISIJ International, vol.40, issue.9, pp.902-908, 2000.
DOI : 10.2355/isijinternational.40.902

K. Sugimoto, S. Nakano, T. Song, and . Kashima, Retained Austenite Characteristics and Stretch-flangeability of High-strength Low-alloy TRIP Type Bainitic Sheet Steels., ISIJ International, vol.42, issue.4, pp.450-455, 2002.
DOI : 10.2355/isijinternational.42.450

]. S. Bohemen, M. Santofimia, and J. Sietsma, Experimental evidence for bainite formation below Ms in Fe???0.66C, Scripta Materialia, vol.58, issue.6, pp.488-491, 2008.
DOI : 10.1016/j.scriptamat.2007.10.045

]. S. Bohemen and J. Sietsma, Martensite Formation in Partially and Fully Austenitic Plain Carbon Steels, Metallurgical and Materials Transactions A, vol.207, issue.5, pp.1059-1068, 2009.
DOI : 10.1007/BF02672301

]. A. Gourgues, H. M. Flower, and T. C. Lindley, Electron backscattering diffraction study of acicular ferrite, bainite, and martensite steel microstructures, Materials Science and Technology, vol.12, issue.1, pp.26-40, 2000.
DOI : 10.1016/0001-6160(67)90207-6

M. Humbert, P. Blaineau, L. Germain, and N. Gey, Refinement of orientation relations occurring in phase transformation based on considering only the orientations of the variants, Scripta Materialia, vol.64, issue.2, pp.114-117, 2011.
DOI : 10.1016/j.scriptamat.2010.09.016

]. D. Kim, J. G. Speer, H. S. Kim, and B. C. Cooman, Observation of an Isothermal Transformation during Quenching and Partitioning Processing, Metallurgical and Materials Transactions A, vol.57, issue.11, pp.2048-2060, 2009.
DOI : 10.1007/BF02646665

I. Pereloma, M. Timokhina, P. Miller, and . Hodgson, Three-dimensional atom probe analysis of solute distribution in thermomechanically processed TRIP steels, Acta Materialia, vol.55, issue.8, pp.2587-2598, 2007.
DOI : 10.1016/j.actamat.2006.12.001

]. I. Timokhina, H. Beladi, X. Y. Xiong, Y. Adachi, and P. Hodgson, Nanoscale microstructural characterization of a nanobainitic steel, Acta Materialia, vol.59, issue.14, pp.5511-5522, 1935.
DOI : 10.1016/j.actamat.2011.05.024

M. Bhadeshia, M. Transactions, A. Bhadeshia, #. , H. K. Bhadeshia et al., Thermodynamic analysis of isothermal transformation diagrams, Metal Science, vol.183, issue.3, pp.3281-3289, 1982.
DOI : 10.1016/0001-6160(63)90157-3

]. S. Bohemen, M. Santofimia, and J. Sietsma, Experimental evidence for bainite formation below Ms in Fe???0.66C, Bainite in steels Second edition, IOM Communications Ltd, pp.488-491, 2001.
DOI : 10.1016/j.scriptamat.2007.10.045

H. Brokmeier, S. B. Yi, and J. Homeyer, Texture Transition in Steel ST37K, in situ Measurement at High Temperatures Using High-Energy X-rays, Microstructure and Texture in Steels and Other Materials, pp.307-321, 2009.
DOI : 10.1007/978-1-84882-454-6_18

C. Garcia-junceda, F. Capdevila, C. Caballero, and . Deandres, Dependence of martensite start temperature on fine austenite grain size, Scripta Materialia, vol.58, issue.2, pp.134-137, 2008.
DOI : 10.1016/j.scriptamat.2007.09.017

P. Hedström, ]. Melero, N. Van-dijk, L. Zhao, J. Sietsma et al., Deformation induced martensitic transformation in metastable stainless steel AISI 301, License, Department of Applied Physics and Mechanical Engineering, pp.56-421, 2005.

]. D. Kim, J. G. Speer, H. S. Kim, and B. C. Cooman, Observation of an Isothermal Transformation during Quenching and Partitioning Processing, Metallurgical and Materials Transactions A, vol.57, issue.11, pp.2048-2060, 2009.
DOI : 10.1007/BF02646665

S. Allain and O. Bouaziz, Microstructure based modeling for the mechanical behavior of ferrite???pearlite steels suitable to capture isotropic and kinematic hardening, Materials Science and Engineering: A, vol.496, issue.1-2, pp.329-336, 2008.
DOI : 10.1016/j.msea.2008.06.009

]. S. Allain, M. Gouné, O. Bouaziz, E. Kassir, P. Barges et al., Design and characterization of a lamellar nanostructure in a low C steel, Journal of Materials Science, vol.6, issue.275, pp.2764-2770, 2010.
DOI : 10.1007/BF03161825

]. O. Bouaziz, S. Allain, C. P. Scott, P. Cugy, and D. Barbier, High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships, Current Opinion in Solid State and Materials Science, vol.15, issue.4, pp.141-168, 2011.
DOI : 10.1016/j.cossms.2011.04.002

URL : https://hal.archives-ouvertes.fr/hal-00607330

F. Caballero, C. Garcia-mateo, J. Chao, M. Santofimia, C. Capdevila et al., Effects of Morphology and Stability of Retained Austenite on the Ductility of TRIP-aided Bainitic Steels, Annales des Ponts et Chaussées Typographie J. Leclerc, pp.1256-1262, 2008.
DOI : 10.2355/isijinternational.48.1256

]. A. Lambert-perlade, ]. S. Lee, B. C. Kim, D. Kwon, A. Warrendale et al., Fracture toughness analysis of heat-affected zones in high-strength low-alloy steel welds, LUD'09] P. Ludwik, Elemente der technologischen Mechanik Microstructure and Texture in Steels and Other Materials, pp.185-205, 1909.

W. J. Sinclair, Y. Poole, and . Bréchet, A model for the grain size dependent work hardening of copper, Scripta Materialia, vol.55, issue.8, pp.739-742, 2006.
DOI : 10.1016/j.scriptamat.2006.05.018

URL : https://hal.archives-ouvertes.fr/hal-00140262

K. Sugimoto, S. Nakano, T. Song, and . Kashima, Retained Austenite Characteristics and Stretch-flangeability of High-strength Low-alloy TRIP Type Bainitic Sheet Steels., ISIJ International, vol.42, issue.4, pp.450-455, 2002.
DOI : 10.2355/isijinternational.42.450