H. Alawi, J. N. Alhajji, and M. R. Reda, The effect of sort tap water chemistry on fatigue crack growth of steel, Enginering Fatigue Mechanics, vol.53, issue.3, pp.387-398, 1996.

C. Bathias and J. Baïlon, La fatigue des matériaux et des structures, 2 ème édition, ASTM STP, vol.595, p.78, 1976.

B. Bhattacharya and . Ellingwood, Continuum damage mechanics analysis of fatigue crack initiation, International Journal of Fatigue, vol.20, issue.9, pp.9-631, 1998.
DOI : 10.1016/S0142-1123(98)00032-2

]. J. Bra66, C. Bradshaw, and . Wheeler, The effect of environnement on fatigue crack propagation, Materials research, vol.5, pp.2-112, 1966.

]. Buf01, S. Buffière, P. H. Savelli, E. Jouneau, R. Maire et al., Experimental study of porosity and its relation to fatigue mechanisms of model Al?Si7?Mg0, Materials Science and Engineering, vol.3, pp.316115-126, 2001.

[. L. Carlson, D. L. Steadman, D. S. Dancila, and G. A. Kardomateas, Fatigue growth of small corner cracks in aluminum 6061-T651, International Journal of Fatigue, vol.19, issue.93, pp.119-125, 1997.
DOI : 10.1016/S0142-1123(97)00033-9

M. D. Chapetti, J. Belmonte, T. Tagawa, and T. Miyata, on the influence of short crack behaviour on fatigue strength of butt-welded joints. International institute of welding, 2003.

S. Chan and J. Lanckford, A crack-tip strain model for the growth of small fatigue cracks, Scripta Metallurgica, vol.17, issue.4, pp.529-532, 1983.
DOI : 10.1016/0036-9748(83)90346-0

S. Chan, Y. M. Pan, D. Davidson, and R. C. Mcclung, Fatigue crack growth mechanisms in HSLA-80 steels, Materials Science and Engineering: A, vol.222, issue.1, pp.222-223, 1997.
DOI : 10.1016/S0921-5093(96)10395-6

M. D. Chapetti, T. Kitano, T. Tagawa, and T. Miyata, Two small-crack extension force concept applied to fatigue limit of blunt notched components., International Journal of Fatigue, vol.21, issue.1, pp.77-82, 1999.
DOI : 10.1016/S0142-1123(98)00057-7

N. Chen, H. Kawagoishi, and . Nisitani, Evaluation of fatigue crack growth rate and life prediction of Inconel 718 at room and elevated temperatures, Materials Science and Engineering: A, vol.277, issue.1-2, pp.250-257, 2000.
DOI : 10.1016/S0921-5093(99)00555-9

R. G. Chermahini, B. Palmberg, and J. C. Newman, three dimensional finite element of fatigue crack growth and closure, ASTM STP 982, pp.398-413, 1988.

G. S. Chen, K. C. Gao, R. P. Wei, and T. H. Flournoy, Transition from pitting to fatigue crack growth ? modelling of corrosion fatigue crack nucleation in a 2024-T3 aluminium alloy, Materials Science and Engineering A219, pp.126-132, 1996.

J. P. Chubb, T. A. Morad, B. S. Hockenhull, and J. W. Bristow, The effect of exfoliation corrosion on the fracture and fatigue behaviour of 7178-T6 aluminium, International Journal of Fatigue, vol.17, issue.1, pp.1-49, 1995.
DOI : 10.1016/0142-1123(95)93050-C

T. Connolley, P. A. Reed, and M. J. , Starink Short crack initiation and growth at 600 8C in notched specimens of Inconel718, Cop91]: thèse, Amorçage et propagation des fissures courtes dans un alliage d'aluminium lithium, pp.139-154, 1991.

M. B. Cortie, C. J. Fletcher, and K. Louw, Fatigue cracking of type 304 sheet in pasteurizer water, International Journal of Fatigue, vol.17, issue.7, pp.7-463, 1995.
DOI : 10.1016/0142-1123(95)00040-Z

]. D. Cos97, C. M. Costa, J. C. Brancot, and . Radont, Short fatigue crack growth behaviour in Al 5083 alloy, Int. J. Fatigue, vol.19, issue.2, pp.161-168, 1997.

M. L. Du, F. P. Chiang, S. V. Kagwadet, and C. R. Claytont, Damage of Al 2024 alloy due to sequential exposure to fatigue, corrosion and fatigue, International Journal of Fatigue, vol.20, issue.10, pp.734-748, 1998.
DOI : 10.1016/S0142-1123(98)00043-7

[. J. Evans, M. R. Bache, M. Mcelhone, and L. Grabowski, Environmental interactions with fatigue crack growth in alpha/beta titanium alloys, International Journal of Fatigue, vol.19, issue.93, pp.177-182, 1997.
DOI : 10.1016/S0142-1123(97)00035-2

[. Ferrie, J. Buffière, and W. Ludwig, Caractérisation tridimentionnelle des fissures courtes de fatigue par micro-tomographie X, SF2M, 2003.

[. J. Forsyth, Fatigue damage and crack growth in aluminium alloys, Acta Metallurgica, vol.11, issue.7, pp.703-715, 1963.
DOI : 10.1016/0001-6160(63)90008-7

[. J. Forsyth, Fatigue Behaviour an dits dependence on microstructure, 15 e colloque de métallurgie de Saclay, 1972.

K. Fujimoto, E. Hamada, G. Shintaku, and . Pirker, Inherent damage zone model for strength evaluation of small fatigue cracks, Gan85]: R.P. Gangloff, Met. Trans., 16A, pp.455-473953, 1985.
DOI : 10.1016/S0013-7944(00)00116-8

[. Grabowski and J. E. King, MODELLING SHORT CRACK GROWTH BEHAVIOUR IN NICKEL-BASE SUPERALLOYS, Fatigue & Fracture of Engineering Materials and Structures, vol.4, issue.6, pp.595-606, 1992.
DOI : 10.1007/BF00020277

T. H. Haddad, K. N. Topper, and . Smith, Prediction of non propagating cracks, Engineering Fracture Mechanics, vol.11, issue.3, pp.573-584, 1979.
DOI : 10.1016/0013-7944(79)90081-X

C. Hashin and . Laird, CUMULATIVE DAMAGE UNDER TWO LEVEL CYCLING: SOME THEORETICAL PREDICTIONS AND TEST DATA, Fatigue & Fracture of Engineering Materials and Structures, vol.31, issue.4, p.345, 1978.
DOI : 10.1016/0036-9748(79)90073-5

J. J. Hou and . Charngt, Models for the estimation of weldment fatigue crack initiation life, International Journal of Fatigue, vol.19, issue.7, pp.537-541, 1997.
DOI : 10.1016/S0142-1123(97)00072-8

M. Hu, W. Floer, U. Krupp, and H. Christ, Microstructurally short fatigue crack initiation and growth in Ti-6.8Mo-4.5Fe-1.5Al, Materials Science and Engineering: A, vol.278, issue.1-2, pp.170-180, 2000.
DOI : 10.1016/S0921-5093(99)00575-4

D. Jiang, J. Petit, and G. Bezine, Stress intensity factors of two parallel 3d surface cracks, Engineering Fracture Mechanics, vol.40, issue.2, pp.345-354, 1991.
DOI : 10.1016/0013-7944(91)90269-7

[. E. Jones, Fatigue crack growth retardation after single-cycle peak overload in Ti-6Al-4V titanium alloy, Engineering Fracture Mechanics, vol.5, issue.3, pp.585-604, 1973.
DOI : 10.1016/0013-7944(73)90042-8

A. Kaynak, T. J. Ankara, and . Baker, Effects of short cracks on fatigue life calculations, International Journal of Fatigue, vol.18, issue.1, pp.25-31, 1996.
DOI : 10.1016/0142-1123(95)00075-5

C. Kaynak, A. Ankara, and T. J. Baker, A comparison of short and long fatigue crack growth in steel, International Journal of Fatigue, vol.18, issue.1, pp.17-23, 1996.
DOI : 10.1016/0142-1123(95)00074-7

S. Kitagawa and . Takahashi, Application of fracture mechanics to very small cracks or the cracks or the cracks in the early stage, Proceedings of 2 nd Int. conf. of Mechanical Behaviour of Materials, pp.627-631, 1976.

G. Kotsikos, J. M. Sutcliffe, and N. J. Holroyd, Hydrogen effects in the corrosion fatigue behaviour of the white zone of 7xxx series aluminium alloy welds, Corrosion Science, vol.42, issue.1, pp.17-33, 2000.
DOI : 10.1016/S0010-938X(99)00047-5

]. J. Kru99, J. P. Kruzic, R. O. Campbell, and . Ritchie, On the fatigue behaviour of -based titanium aluminides: role of small cracks, Acta mater, vol.47, issue.3, pp.801-816, 1999.

]. Lan74, J. G. Lankford, and . Barbee, SEM characterisation of fatigue crack tip deformation in stailess steel using a positive replica technique, J. Mater. Sci, vol.9, pp.1906-1908, 1974.

L. Lanes, A. Mateo, P. Villechaise, J. Mendez, and M. , Effect of testing atmosphere (air/in vacuo) on low cycle fatigue characteristics of a duplex stainless steel, International Journal of Fatigue, vol.21, pp.119-125, 1999.
DOI : 10.1016/S0142-1123(99)00063-8

W. Y. Maeng, Y. H. Kang, T. W. Nam, S. Ohashi, and T. , Synergistic interaction of fatigue and stress corrosion on the corrosion fatigue crack growth behavior in Alloy 600 in high temperature and high pressure water, Journal of Nuclear Materials, vol.275, issue.2, pp.194-200, 1975.
DOI : 10.1016/S0022-3115(99)00114-2

]. Men86, P. Mendez, G. Violan, and . Gasc, The behaviour of short fatigue cracks, Mech.Eng.pub.london, p.145, 1986.

T. Meraha, M. Bui-quoc, and . Bernard, Creep-fatigue crack growth in notched SS-304 plates at 600°C Engineering Fracture Mechanics 63, pp.39-55, 1999.

[. J. Miller, E. R. Mohamed, and . De-los-rios, The Behaviour of Short Fatigue Cracks, EGF, Mech. Eng.Pub, p.491, 1986.

[. J. Miller, THE TWO THRESHOLDS OF FATIGUE BEHAVIOUR, Fatigue & Fracture of Engineering Materials and Structures, vol.9, issue.5, pp.931-939, 1993.
DOI : 10.1111/j.1460-2695.1993.tb00129.x

[. J. Miller, The three thresholds for fatigue crack propagation, fatigue and fracture mechanics, pp.267-286, 1997.

[. Molski and G. Glinka, A method of elastic-plastic stress and strain calculation at a notch root, Materials Science and Engineering, vol.50, issue.1, pp.93-100, 1981.
DOI : 10.1016/0025-5416(81)90089-6

W. L. Morris, M. R. James, and O. Buck, Growth rate models for short surface cracks in AI 2219-T851, Metallurgical Transactions A, vol.7, issue.1, pp.57-64, 1981.
DOI : 10.1115/1.3443647

W. L. Morris, O. James, and . Buck, A simple model of stress intensity range threshold and crack closure stress, Engineering Fracture Mechanics, vol.18, issue.4, p.871, 1983.
DOI : 10.1016/0013-7944(83)90131-5

R. Murtaza and . Akid, Empirical corrosion fatigue life prediction models of a high strength steel, Engineering Fracture Mechanics, vol.67, issue.5, pp.461-474, 2000.
DOI : 10.1016/S0013-7944(00)00057-6

T. Mura and J. Wertman, Fatigue crack growth threshold concepts, p.531, 1984.

S. Oh, Y. Earmme, and J. Song, Automated real-time measurements of fatigue crack length and crack opening load using unloading elastic compliance method, International Journal of Fatigue, vol.19, issue.2, pp.169-176, 1997.
DOI : 10.1016/S0142-1123(96)00022-9

[. S. Pao, S. J. Gill, and C. R. , Feng, on fatigue crack initiation from corrosion pits in 7075- T7351 aluminium alloy, Scripta mater, pp.391-396, 2000.

M. Papakyriacou, H. Mayer, C. Pypen, H. Plenk-jr, and S. , Effects of surface treatments on high cycle corrosion fatigue of metallic implant materials, International Journal of Fatigue, vol.22, issue.10, pp.873-886, 2000.
DOI : 10.1016/S0142-1123(00)00057-8

]. Pet96, J. Petit, and . Mendez, some aspects of the influence of microstructure on fatigue, pp.327-341, 1996.

M. Radhakrishnan and Y. Mutoh, On fatigue crack growth in stage I, the behaviour of short fatigue crack, EGF Pub.1, Mechanical Engineering Publication Stress intensity factors for a wide range of semi-elliptical surface cracks in finite thickness plates, Engng Fracture Mechs, vol.971, issue.11, pp.87-99817, 1979.

[. O. Ritchie and J. Lankford, Small fatigue crack, A publication of the metallurgical society Inc, 1986.

R. O. Ritchie, B. L. Boyce, J. P. Campbell, O. Roder, A. W. Thompson et al., Thresholds for high-cycle fatigue in a turbine engine Ti?, International Journal of Fatigue, vol.21, pp.6-10, 1999.

[. P. Rooke and D. J. Cartwright, Compendium of stress intensity factors, 1975.

A. K. Sadananda and . Vasudevan, Analysis of high temperature fatigue crack growth behavior, International Journal of Fatigue, vol.19, issue.93, pp.183-189, 1997.
DOI : 10.1016/S0142-1123(97)00028-5

A. K. Sadananda and . Vasudevant, Short crack growth and internal stresses, International Journal of Fatigue, vol.19, issue.93, pp.99-108, 1997.
DOI : 10.1016/S0142-1123(97)00057-1

C. Sinha, W. O. Mercer, and . Soboyejo, An investigation of short and long fatigue crack growth behavior of Ti???6Al???4V, Materials Science and Engineering: A, vol.287, issue.1, pp.6-10, 1978.
DOI : 10.1016/S0921-5093(00)00817-0

S. Suresh and R. O. Ritchine, A geometric of model for fatigue crack closure inducted by fracture surface roughness. Metallurgical transaction A, Suresh and R.O.Ritchine Int. Met. Rev, vol.13, issue.296, pp.1627-1631, 1982.

]. Sur84, R. O. Suresh, and . Ritchie, Fatigue Crack Growth Threshold Concept, The Metallurgie Society of AIME, pp.227-261, 1984.

Y. Tanaka and . Nakai, PROPAGATION AND NON-PROPAGATION OF SHORT FATIGUE CRACKS AT A SHARP NOTCH, Fatigue & Fracture of Engineering Materials and Structures, vol.45, issue.4, pp.315-327, 1983.
DOI : 10.1115/1.3424286

[. Taylor and J. F. Knott, Fatigue crack propagation behaviour of short cracks; the effect of microstructure fatigue of engineering materials and structures, pp.147-155, 1981.

S. Tchankov, A. Ohta, N. Suzuki, and Y. Maeda, Random loading fatigue life assessments for notched plates, International Journal of Fatigue, vol.21, issue.9, pp.941-946, 1999.
DOI : 10.1016/S0142-1123(99)00078-X

K. Tokaji, J. C. Bian, T. Ogawa, and M. Nakajima, The microstructure dependence of fatigue behaviour in Ti-15Mo-5Zr-3Al alloy, Materials Science and Engineering A213, pp.86-92, 1996.

H. Tsukuda, H. Ogiyama, and T. Shiraishi, transient fatigue crack growth behaviour following single overloads at high stress ratio, fatigue and fracture of engineering, Materials and structures, vol.19, issue.7, pp.879-891, 1996.

[. J. Wadsworth and J. Hutchings, The effect of atmospheric corrosion on metal fatigue, philosophical magazine, serie 8, pp.34-1154, 1958.

C. J. Walker and . Beevers, A FATIGUE CRACK CLOSURE MECHANISM IN TITANIUM, Fatigue & Fracture of Engineering Materials and Structures, vol.5, issue.1, pp.135-148, 1979.
DOI : 10.1016/0013-7944(72)90074-4

X. Wu and . Sun, Multiple fatigue crack initiation, coalescence and growth in blunt notched specimens, eng, Fract. Mec. N°, vol.593, pp.353-359, 1998.

T. Zhai, A. J. Wilkinson, and J. W. Martin, A Crystallographic mechanism for fatigue crack propagation through grain boundaries, Acta mater, pp.4917-4927, 2000.

[. J. Zhu, L. M. Peng, T. Moriya, and Y. Mutoh, Effect of stress ratio on fatigue crack growth in TiAl intermetallics at room and elevated temperatures, Materials Science and Engineering: A, vol.290, issue.1-2, pp.198-206, 2000.
DOI : 10.1016/S0921-5093(00)00958-8