A. Khezzar, M. Y. Kaikaa, M. E. Oumaamar, M. Boucherma, and H. Razik, On the Use of Slot Harmonics as a Potential Indicator of Rotor Bar Breakage in the Induction Machine, IEEE Transactions on Industrial Electronics, vol.56, issue.11, 2009.
DOI : 10.1109/TIE.2009.2030819

URL : https://hal.archives-ouvertes.fr/hal-00440396

A. Khezzar, M. E. Oumaamar, M. Hadjami, M. Boucherma, and H. Razik, Induction Motor Diagnosis Using Line Neutral Voltage Signatures, IEEE Transactions on Industrial Electronics, vol.56, issue.11, pp.4581-4591, 2009.
DOI : 10.1109/TIE.2008.2010209

URL : https://hal.archives-ouvertes.fr/hal-00440416

H. Chapitre-d-'ouvrage-version-française, M. E. Razik, and . Oumaamar, Chapitre 7. « Diagnostic de défauts électriques et mécaniques de la machine asynchrone par traitement du signal

H. Version-anglaise, M. E. Razik, and . Oumaamar, Chapter 7 Electrical and mechanical faults diagnosis of induction machines using signal analysis ». Book untitled: « Electrical Machines Diagnosis, p.352, 2011.

C. Et-comité-de-lecture, A. Khezzar, M. E. Oumaamar, A. Lebaroud, and M. Boucherma, Novel Study of Induction Motors with Broken Bar Faults Rotor Cage Faults Analysis in Three Phase Asynchrone Motors by Parametric and Modified Park Model, 16 th international conference on electrical machines. ICEM'2004 16 th international conference on electrical machines Proc Electromotion, pp.5-8, 2004.

M. Y. Kaikaa, A. Khezzar, M. Boucherma, and M. E. Oumaamar, Analysis of Rotor Slot Harmonics Rotation in Squirrel Cage Asynchrone Machines, pp.2-5, 2006.

M. E. Oumaamar, F. Babaa, A. Khezzar, and M. Boucherma, Diagnostics of Broken Rotor Bars in Induction Machines Using the Neutral Voltage, Conference. Chania. Greece, pp.2-5, 2006.

M. E. Oumaamar, A. Khezzar, M. Boucherma, H. Razik, R. Andriamalala et al., Neutral Voltage Analysis for Broken Rotor Bars Detection in Induction Motors Using Hilbert Transform Phase september, IAS 2007,43 rd Annual meeting, pp.23-27, 2007.

A. Khezzar, M. Hadjami, N. Bessous, M. E. Oumaamar, and H. Razik, Accurate modelling of cage induction machine with analytical evaluation of inductances, 2008 34th Annual Conference of IEEE Industrial Electronics, pp.10-13, 2008.
DOI : 10.1109/IECON.2008.4758110

M. E. Oumaamar, H. Razik, and A. Khezzar, Experimental investigation of stator current signature in defective induction motor " IECON '09, pp.3-6, 2009.

M. Hadjami, A. Khezzar, M. E. Oumaamar, H. Razik, and A. Rezzoug, Analytical model of cage induction machine dedicated to the study of axial non-uniformities, 8th IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives, pp.5-8, 2011.
DOI : 10.1109/DEMPED.2011.6063683

URL : https://hal.archives-ouvertes.fr/hal-00636512

M. E. Oumaamar, H. Razik, A. Rezzoug, H. Chemali, and A. Khezzar, Experimental Investigation of New Indices of Broken Rotor Bar in Induction Motor " acemp, pp.305-308, 2011.

M. E. Oumaamar, H. Razik, A. Rezzoug, and A. Khezzar, Line Current Analysis for Bearing Fault Detection Induction Motors Using Hilbert Transform Phase " acemp, pp.289-294, 2011.

H. Boyer, M. Norbert-;-r, and . Philippe, Cours de construction du matériel électrique, 1981.

J. Chatelain, Machines électriques, 1983.

W. T. Thomson and S. Williamson, Failure identification of offshore induction motor using on-line condition monitoring Steady-state analysis of double-cage induction motors with rotor cage faults, Proceedings of Fourth National Reliability Conference, pp.1-11199, 1983.

G. B. Kliman, R. A. Koegl, J. Stein, R. D. Endicott, and M. W. Madden, Noninvasive detection of broken rotor bars in operating induction motors, IEEE Transactions on Energy Conversion, vol.3, issue.4, pp.873-879, 1988.
DOI : 10.1109/60.9364

F. Filippetti, M. Martelli, G. Franceschini, and C. Tassoni, Development of expert system knowledge base to one-line diagnosis of rotor electrical faults of induction motors, Conf. Rec. 27th Ann. Ind. Applicat. Soc. Meeting, pp.92-99, 1992.

R. F. Walliser and C. F. Landy, Determination of interbar current effects in the detection of broken rotor bars in squirrel cage induction motors, IEEE Transactions on Energy Conversion, vol.9, issue.1, pp.152-158, 1994.
DOI : 10.1109/60.282486

R. R. Schoen-;-t, R. R. Habetler, T. G. Schoen, and . Habetler, A new method of current-based condition monitoring in induction machines operating under arbitrary load conditions " ICEM 94 Effects of time-varying loads on rotor Fault detection in induction machines, IEEE Transactions on Industry Applications, issue.4, pp.31-900, 1995.

G. B. Kliman, W. J. Premerlani, R. A. Koegl, and D. Hoeweler, A new approach to on-line turn fault detection in AC motors, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting, pp.687-693, 1996.
DOI : 10.1109/IAS.1996.557113

W. T. Thomson and I. D. Stewart, On-line current monitoring for fault diagnosis in inverter fed induction motors, IEE Third international conference on power electronics and drives, pp.432-435, 1988.

A. Bellini, F. Filippetti, G. Franceschini, C. Tassoni, and J. Kliman, Quantitative evaluation of induction motor broken bars by means of electrical signature analysis, IEEE Transactions on Industry Applications, vol.37, issue.5, pp.1248-1255, 2001.
DOI : 10.1109/28.952499

S. Hayashi, T. Asakura, and S. Zhang, Study of machine fault diagnosis system using neural networks, Proceedings of the 2002 International Joint Conference on Neural Networks. IJCNN'02 (Cat. No.02CH37290), pp.956-961, 2002.
DOI : 10.1109/IJCNN.2002.1005604

G. Didier, E. Ternisien, and H. Razik, Detection of incipient rotor cage fault and mechanical abnormalities in induction motor using global modulation index on the line current spectrum, 2005 5th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, pp.7-9, 2005.
DOI : 10.1109/DEMPED.2005.4662510

A. Bellini, C. Concari, G. Franceschini, C. Tassoni, and A. Toscani, Vibrations, currents and stray flux signals to asses induction motors rotor conditions, IECON 2006, 32nd Annual Conference on IEEE Industrial Electronics, pp.4963-4968, 2006.
DOI : 10.1109/IECON.2006.347365

C. Bruzzese, O. Honorati, and E. Santini, Harmonic Current Sideband-Based Novel Indicators of Broken Bars for On-line Evaluation of Industrial and Railway Cage Motor Faults, 2007 IEEE International Symposium on Industrial Electronics, pp.1252-1257, 2007.
DOI : 10.1109/ISIE.2007.4374778

L. Baghli, D. Hein, H. Razik, and A. Rezzoug, Modelling Rotor Cage Induction Motors for Default Detection, IEEE-SDEMPED'97, pp.41-47, 1997.

A. Abed, Contribution à l'Étude et au Diagnostic de la Machine Asynchrone, Thèse de Doctorat, 2002.

J. R. Cameron, W. T. Thomson, and A. B. Dow, Vibration and current monitoring for detecting airgap eccentricity in large induction motors, IEE Proceedings B Electric Power Applications, pp.155-63, 1986.
DOI : 10.1049/ip-b.1986.0022

S. Nandi, S. Ahmed, and H. A. Toliyat, Detection of rotor slot and other eccentricity related harmonics in a three phase induction motor with different rotor cages, IEEE Transactions on Energy Conversion, vol.16, issue.3, pp.253-260, 2001.
DOI : 10.1109/60.937205

S. Nandi, S. Ahmed, H. A. Toliyat, and R. M. Bharadwaj, Selection criteria of induction machines for speed-sensorless drive applications, IEEE Transactions on Industry Applications, vol.39, issue.3, pp.704-712, 2003.
DOI : 10.1109/TIA.2003.810651

R. N. Andriamalala, H. Razik, L. Baghli, and F. M. Sargos, Eccentricity Fault Diagnosis of a Dual-Stator Winding Induction Machine Drive Considering the Slotting Effects, IEEE Transaction on Industrial Electronics, pp.4238-4251, 2008.
DOI : 10.1109/TIE.2008.2004664

URL : https://hal.archives-ouvertes.fr/hal-00440401

M. G. Melero, M. F. Cabanas, G. A. Orcajo, J. M. Cano, and G. A. Capolino, An Automated Insulation Failure Detection System for Working Induction Motors, p.99

E. Schaeffer, Diagnostic des machines asynchrones : modèles et outils paramétriques dédiés à la simulation et à la détection de défauts, 1999.

D. Kostic-perovic, M. Arkan, and P. Unsworth, Induction motor fault detection by space vector angular fluctuation, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129), 2000.
DOI : 10.1109/IAS.2000.881140

A. Bellini, M. Cavatorta, C. Concari, E. Lorenzani, C. Tassoni et al., Experimental validation of a robust diagnostic index for induction motors stator faults, 30th Annual Conference of IEEE Industrial Electronics Society, 2004. IECON 2004, pp.2-6, 2004.
DOI : 10.1109/IECON.2004.1431777

R. R. Schoen-;-t, . Habetler-;-f, . G. Kamran-;-r, and . Bartheld, Motor bearing damage detection using stator current monitoring, IEEE Transactions on Industry Applications, vol.31, issue.6, pp.1274-1279, 1995.
DOI : 10.1109/28.475697

P. Vas, Parameter estimation, condition monitoring, and diagnosis of electrical machines, 1993.

J. Penman, H. G. Sedding, B. A. Lloyd, and W. T. Fink, Detection and location of interturn short circuits in the stator windings of operating motors, IEEE Transactions on Energy Conversion, vol.9, issue.4, pp.652-658, 1994.
DOI : 10.1109/60.368345

G. M. Joksimovic and J. Penman, The detection of inter-turn short circuits in the stator windings of operating motors, IEEE Transactions on Industrial Electronics, vol.47, issue.5, pp.1078-1084, 2000.
DOI : 10.1109/41.873216

E. F. Merrill, Dynamics of AC electrical machines, 39th Annual meeting, p.277, 1992.
DOI : 10.1109/28.287533

G. M. Joksimovic, M. D. Durovic, J. Penman, and N. Arthur, Dynamic simulation of dynamic eccentricity in induction machines-winding function approach, IEEE Transactions on Energy Conversion, vol.15, issue.2, 2000.
DOI : 10.1109/60.866991

H. Guldmir, Detection of airgap eccentricity using line current spectrum of induction motors Electric Power Systems Research, pp.109-117, 2003.

D. G. Dorrell, W. T. Thomson, and S. Roach, Analysis of airgap flux, current, and vibration signals as a function of the combination of static and dynamic airgap eccentricity in 3-phase induction motors, IEEE Transactions on Industry Applications, vol.33, issue.1, pp.24-34, 1997.
DOI : 10.1109/28.567073

S. Nandi, R. M. Bharadwaj, and H. A. Toliyat, Mixed eccentricity in three phase induction machines: analysis, simulation and experiments, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344), pp.1525-1532, 2002.
DOI : 10.1109/IAS.2002.1043737

W. Long, Separating Load Torque Oscillation And Rotor Faults In Stator Current Based-Induction Motor Condition Monitoring " doctoral thesis in Electrical Engineering, Georgia Institute of Technology, 2007.

A. R. Crawford and S. Crawford, The Simplified Handbook of Vibration Analysis Vol I: introduction to Vibration Analysis Fundamentals, Computational Systems Incorporated, 1992.

C. Scheffer and P. Girdhar, Practical Machinery Vibration Analysis and Predictive Maintenance, 2004.

W. Li and C. K. Mechefske, Detection of Induction Motor Faults: A Comparison of Stator Current, Vibration and Acoustic Methods, Journal of Vibration and Control, vol.35, issue.3, pp.165-188, 2006.
DOI : 10.1109/TIE.2003.819682

M. Blödt, models for bearing damage detection in induction motors, IEEE transactions on industrial electronics, vol.55, issue.4, 2008.

B. Yazici and G. B. Kliman, An adaptive statistical time-frequency method for detection of broken bars and bearing faults in motors using stator current, IEEE Transactions on Industry Applications, vol.35, issue.2, pp.442-452, 1999.
DOI : 10.1109/28.753640

H. Ocak and K. A. Loparo, Estimation of the running speed and bearing defect frequencies of an induction motor from vibration data, Mechanical Systems and Signal Processing, vol.18, issue.3, pp.515-533, 2004.
DOI : 10.1016/S0888-3270(03)00052-9

W. G. Zhou-;-t, . G. Habetler-;-r, and . Harley, Stator Current-Based Bearing Fault Detection Techniques: A General Review, IEEE International Symposium on. Diagnostics for Electric Machines, Power Electronics and Drives, pp.7-10, 2007.

M. E. Oumaamar, H. Razik, and A. Khezzar, Experimental investigation of stator current signature in defective induction motor " IECON '09, pp.3-6, 2009.

J. R. Stack, R. G. Harley, and T. G. Habetler, An amplitude Modulation detector for fault diagnosis in rolling element bearings, IEEE Trans. on Industrial Electronics, vol.15, issue.5, pp.1097-1102, 2004.

N. M. El-kasabgy, A. R. Eastharq, and G. E. Dawson, Detection of broken bars in the cage rotor on an induction machine, IEEE Trans. Ind. AppL, issue.6, pp.165-171, 1992.

F. Filippetti, G. Franceschini, and C. Tassoni, Neural Networks Aided On-Line Diagnostics of Induction Motor Rotor Faults, IEEE Transations on Industry Applications, vol.31, pp.4-892, 1995.

F. Filippetti, G. Franceschini, C. Tassoni, and P. Vas, AI techniques in induction machines diagnosis including the speed ripple effect, IEEE Transactions on Industry Applications, vol.34, issue.1, pp.98-108, 1998.
DOI : 10.1109/28.658729

J. Jung, J. Lee, and B. Kwon, Online Diagnosis of Induction Motors Using MCSA, IEEE Transactions on Industrial Electronics, vol.53, issue.6, pp.1842-1852, 2006.
DOI : 10.1109/TIE.2006.885131

M. Yazid-kaikaa, F. Babaa, A. Khezzar, and M. Boucherma, Analytical analysis of rotor slot harmonics in the line current of squirrel cage induction motors, journal of electrical engineering, vol.57, issue.1, pp.12-19, 2006.

A. Khezzar, M. Y. Kaikaa, M. E. Oumaamar, M. Boucherma, and H. Razik, On the Use of Slot Harmonics as a Potential Indicator of Rotor Bar Breakage in the Induction Machine, IEEE Transactions on Industrial Electronics, vol.56, issue.11, pp.4592-4605, 2009.
DOI : 10.1109/TIE.2009.2030819

URL : https://hal.archives-ouvertes.fr/hal-00440396

J. Milimonfared, H. M. Kelk, S. Nandi, A. D. Minasians, and H. A. Toliyat, A novel Approach for Broken-Rotor-Bar Detection in Cage Induction Motors, IEEE Trans. Ind . Applicat, vol.35, issue.5, 1999.

F. Cupertino, E. De-vanna, L. Salvatore, and S. Stasi, Analysis Techniques for Detection of IM Broken Rotor Bars After Supply Disconnection, IEEE Trans. Ind. Appl, vol.40, issue.2, 2004.

A. Khezzar, M. E. Oumaamar, A. Lebaroud, and M. Boucherma, Novel Study of Induction Motors with Broken Bar Faults, Proc. ICEM'2004, pp.5-8, 2004.

A. Khezzar, M. Y. Kaikaa, and M. Boucherma, Analytical investigation of rotor slot harmonics in a three phase induction motor with broken rotor bars, 2005 European Conference on Power Electronics and Applications, pp.11-14, 2005.
DOI : 10.1109/EPE.2005.219403

H. Henao, G. A. Capolino, and C. Martis, On the stray flux analysis for the detection of the three-phase induction machine faults, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003., 2002.
DOI : 10.1109/IAS.2003.1257729

M. A. Cash, T. G. Habetler, and G. B. Kliman, Insulation failure prediction in AC machines using line-neutral voltages, IEEE Transactions on Industry Applications, vol.34, issue.6, pp.1234-1239, 1998.
DOI : 10.1109/28.738983

H. Razik and G. Didier, A Novel Method of Induction Motor Diagnosis Using the Line-Neutral Voltage, Proc. EPE-PEMC, 2004.

P. García, F. Briz, M. W. Degner, and A. B. Diez, Diagnostics of induction machines using the zero sequence voltage, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting., 2004.
DOI : 10.1109/IAS.2004.1348496

M. E. Oumaamar, F. Babaa, A. Khezzar, and M. Boucherma, Diagnostics of Broken Rotor Bars in Induction Machines Using the Neutral Voltage, Conference. Chania. Greece, pp.2-5, 2006.

M. E. Oumaamar, A. Khezzar, M. Boucherma, H. Razik, R. Andriamalala et al., Neutral Voltage Analysis for Broken Rotor Bars Detection in Induction Motors Using Hilbert Transform Phase september, IAS 2007,43 rd Annual meeting, pp.23-27, 2007.

A. Khezzar and M. E. Oumaamar, Diagnostics of Induction Machines with Incipient Rotor Cage Faults Using the Neutral Voltage, International Review of Electrical Engineering, 2007.

A. Khezzar, M. E. Oumaamar, M. Hadjami, M. Boucherma, and H. Razik, Induction Motor Diagnosis Using Line Neutral Voltage Signatures, IEEE Transactions on Industrial Electronics, vol.56, issue.11, pp.4581-4591, 2009.
DOI : 10.1109/TIE.2008.2010209

URL : https://hal.archives-ouvertes.fr/hal-00440416

;. C. Kerszenbaum and . Landy, Existence of large interbar current in three phases squirrel cage motor with rotor bar and/or end-rings, IEEE Transactions on Power Apparatus and systems, vol.3, issue.3, pp.1854-1862

G. H. Muller and C. F. Landy, A novel method to detect broken rotor bars in squirrel cage induction motors when interbar currents are present, IEEE Transactions on Energy Conversion, vol.18, issue.1, pp.71-79, 2003.
DOI : 10.1109/TEC.2002.808338

H. Razik, H. Henao, and R. Carlson, The effect of inter-bar currents on the diagnostic of the induction motor, 2004 IEEE International Symposium on Industrial Electronics, pp.4-7
DOI : 10.1109/ISIE.2004.1571915

H. Yahoui-;-g and . Grellet, Analysis of harmonics components of the electromagnetic torque of an asynchronous motor with an end ring fault, ICEM 1996, vol.3, p.392

G. Salles, « Surveillance et Diagnostic des Défauts de la Charge d'un Entraînement par Machine Asynchrone, Thèse de Doctorat Université Lyon 1, 1997.

A. J. Cardoso, Rotor Cage Faults Diagnosis in Three-Phase Induction Motors by Park's Vector Approach, 30 th Ind. Applicat. Society Annual Meeting, pp.642-646, 1995.

J. I. Taylor, The vibration analysis handbook, 2001.

G. Didier, Modélisation et diagnostic de la machine asynchrone en présence de défaillances " thèse de doctorat soutenue le 29, 2004.

G. Didier, E. Ternisien, O. Caspary, and H. Razik, A new approach to detect broken rotor bars in induction machines by current spectrum analysis, Mechanical Systems and Signal Processing, 2007.
DOI : 10.1016/j.ymssp.2006.03.002

URL : https://hal.archives-ouvertes.fr/hal-00115405

M. E. Oumaamar, H. Razik, A. Rezzoug, and A. Khezzar, Line Current Analysis for Bearing Fault Detection Induction Motors Using Hilbert Transform Phase " acemp, pp.289-294, 2011.

Y. Liao and T. A. Lipo, EFFECT OF SATURATION THIRD HARMONIC ON THE PERFORMANCE OF SQUIRREL-CAGE INDUCTION MACHINES, Electric Machines & Power Systems, vol.6, issue.2, pp.155-171, 1994.
DOI : 10.1109/60.84322

M. E. Oumaamar, H. Razik, A. Rezzoug, H. Chemali, and A. Khezzar, Experimental Investigation of New Indices of Broken Rotor Bar in Induction Motor " acemp, pp.305-308, 2011.

H. A. Toliyat and T. A. Lipo, Transient analysis of cage induction machines under stator, rotor bar and end ring faults'' Energy Conversion, IEEE Transactions on, issue.10 2, pp.241-247

H. A. Toliyat, M. S. Arefeen, and A. G. Parlos, A Method for Dynamic Simulation of Air-Gap Eccentricity in Induction Machines, IEEE Trans. Ind. Applicat, vol.32, issue.4, 1996.

A. Khezzar, M. Hadjami, N. Bessous, M. E. Oumaamar, and H. Razik, Accurate modelling of cage induction machine with analytical evaluation of inductances, 2008 34th Annual Conference of IEEE Industrial Electronics, pp.10-13, 2008.
DOI : 10.1109/IECON.2008.4758110

X. Luo, Y. Liao, H. A. Toliyat, A. El-antably, and T. A. Lipo, Multiple coupled circuit modeling of induction machines, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting, pp.march-april, 1995.
DOI : 10.1109/IAS.1993.298925

E. Ritchie, X. Deng, and T. Jokinen, Dynamic model of three phase squirrel cage induction motor with rotor faults, Conference, pp.694-698, 1994.

M. Y. Kaikaa, F. Babaa, A. Khezzar, and M. Boucherma, Analytical Analysis of Rotor Slot Harmonics in the Line Current of Squirrel Cage Induction Motors, Journal of Electrical Engineering, vol.57, pp.12-19, 2006.

C. Cheny and J. M. Kauffmann, Information losses in decoupling space harmonics effects for an induction drive, Mathematics and Computers in Simulation, vol.46, issue.3-4, pp.361-372, 1998.
DOI : 10.1016/S0378-4754(97)00148-1

W. F. Deleroi-]-r, . F. Walliser-;-c, and . Landy, Squirrel cage motor with broken bar in the rotor -Physical phenomena and their experimental assessment Proceedings part 3, sept 82 The Influence of inter bar Currents on the detection of Broken Rotor Bars, International Conference on Electrical Machine (ICEM 92), Proceedings, pp.1-246, 1992.

M. Hadjami, A. Khezzar, M. E. Oumaamar, H. Razik, and A. Rezzoug, Analytical model of cage induction machine dedicated to the study of axial non-uniformities, 8th IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives, pp.5-8, 2011.
DOI : 10.1109/DEMPED.2011.6063683

URL : https://hal.archives-ouvertes.fr/hal-00636512

F. Babaa, M. E. Oumaamar, A. Khezzar, and M. Boucherma, Multiple coupled circuit modeling of squirrel-cage induction motors including space harmonics and line neutral voltage Analysis of Rotor Slot Harmonics Rotation in Squirrel Cage Asynchrone Machines, pp.2-5, 2006.

J. S. Hsu, S. P. Liou, B. T. Lin, and W. F. Weldon, Losses influenced by third-harmonic flux in induction motors, IEEE Transactions on Energy Conversion, vol.6, issue.3
DOI : 10.1109/60.84322

P. L. Alger, Induction Machines, 1970.

P. G. Kini, R. C. Bansal, and R. S. , A Novel Approach Toward Interpretation and Application of Voltage Unbalance Factor, IEEE Transactions on Industrial Electronics, vol.54, issue.4, pp.2315-2322, 2007.
DOI : 10.1109/TIE.2007.899935