. Awaji, Characteristics and applications of Fe-Mn-Si-based shape memory alloys, 2008.

A. Baruj, Improvement of shape memory properties of NbC containing Fe???Mn???Si based shape memory alloys by simple thermomechanical treatments, Materials Science and Engineering: A, vol.378, issue.1-2, pp.333-336, 2004.
DOI : 10.1016/j.msea.2003.10.357

A. Baruj, G. Bertolino, and H. E. Troini, Temperature dependence of critical stresss and pseudoelasticity in a Fe-Mn-Si-Cr pre-rolled alloy, Journal of alloys and compounds, 2010.

A. Baruj, A. F. Guillermet, and M. Sade, Eects of thermal cycling and plastic deformation upon the Gibbs energy barriers to martensitic transformation in Fe-Mn and

A. Baruj, T. Kikuchi, and S. Kajiwara, TEM observation of the internal structures in NbC containing Fe???Mn???Si-based shape memory alloys subjected to pre-deformation above room temperature, Materials Science and Engineering: A, vol.378, issue.1-2, pp.337-342, 2004.
DOI : 10.1016/j.msea.2003.10.358

A. Baruj and H. E. Troiani, The eect of pre-rolling Fe-Mn-Si-based shape memory alloys : Mechanical properties and transmission electron microcopy examination, Materials Science and Engineering A, pp.481-482574, 2008.

N. Bergeon, G. Guenin, and C. Esnouf, Characterization of the stress-induced ?? martensite in a Fe???Mn???Si???Cr???Ni shape memory alloy: microstructural observation at different scales, mechanism of formation and growth, Materials Science and Engineering: A, vol.238, issue.2, pp.309-316, 1997.
DOI : 10.1016/S0921-5093(97)00458-9

N. Bergeon, G. Guenin, and C. Esnouf, Microstructural analysis of the stress-induced ?? martensite in a Fe???Mn???Si???Cr???Ni shape memory alloy: Part I???calculated description of the microstructure, Materials Science and Engineering: A, vol.242, issue.1-2, pp.77-86, 1998.
DOI : 10.1016/S0921-5093(97)00511-X

N. Bergeon, G. Guenin, and C. Esnouf, Microstructural analysis of the stress-induced ?? martensite in a Fe???Mn???Si???Cr???Ni shape memory alloy, Materials Science and Engineering: A, vol.242, issue.1-2, pp.87-95, 1998.
DOI : 10.1016/S0921-5093(97)00512-1

T. Bouraoui, Transformations martensitiques suivies par mesure de résistance électrique et de plasticité de transformation. Conception et réalisation des appareils. Applications aux aciers à mémoire de forme de la gamme Fe-Mn-Si, Thèse de doctorat, 1996.

T. Bouraoui, Inuence de l'instabilité microstructurale sur le comportement thermomécanique et la mise en forme des aciers : Analyse Physique, Durabilité, Modélisation et Optimisation . Mémoire d'habilitation universitaire, 2008.

T. Bouraoui, F. Jemal, and T. B. Zineb, Tensile properties of a Fe-32Mn-6Si shape meory alloy, Strength of Materials, pp.203-209, 2008.

N. Van-caenegem, L. Duprez, K. Verbeken, D. Segers, and Y. Houbaert, Stresses related to the shape memory eect in Fe-Mn-Si-based shape memory alloys, Materials Science and Engineering A, pp.481-482183, 2008.

A. Char, T. Bouraoui, M. Feki, C. Bradai, and B. Normand, Surface treatment and corrosion behaviour of Fe???32Mn???6Si shape memory alloy, Comptes Rendus Chimie, vol.12, issue.1-2, pp.270-275, 2009.
DOI : 10.1016/j.crci.2007.11.008

Y. Chemisky, Modélisation du comportement macroscopique des alliages à mémoire de forme -Application aux matériaux composites, Thèse de doctorat, 2009.

Y. Chemisky, A. Duval, E. Patoor, and T. B. Zineb, Constitutive model for shape memory alloys including phase transformation, martensitic reorientation and twins accommodation, Mechanics of Materials, vol.43, issue.7, pp.361-376, 2011.
DOI : 10.1016/j.mechmat.2011.04.003

M. Cherkaoui, M. Berveiller, and X. Lemoine, Couplings between plasticity and martensitic phase transformation: overall behavior of polycrystalline TRIP steels, International Journal of Plasticity, vol.16, issue.10-11, pp.10-111215, 2000.
DOI : 10.1016/S0749-6419(00)00008-5

C. Y. Chung, C. Shuchuan, and T. Y. Hsu, Thermomechanical training behavior and its dynamic mechanical analysis in an Fe-Mn-Si shape memory alloy, Materials Characterization, vol.37, issue.4, pp.227-236, 1996.
DOI : 10.1016/S1044-5803(96)00149-0

C. Collard, Simula+ project

A. Druker, A. Baruj, and J. Malarria, Eect of rolling conditions on the structure and shape memory properties of Fe-Mn-Si alloys. materials characterization, pp.603-612, 2010.

A. Duval, Modélisation du comportement thermomécanique d'alliages à mémoire de forme Application au dimensionnement de micro-systèmes et extension en non local, Thèse de doctorat, 2009.

D. Entemeyer, E. Patoor, A. Eberhardt, and M. Berveiller, Strain rate sensitivity in superelasticity, International Journal of Plasticity, vol.16, issue.10-11, pp.1269-1288, 2000.
DOI : 10.1016/S0749-6419(00)00010-3

E. Eskil and M. Ceylan, Characterization of phase transformations and shape memory behavior of Fe-27, 79 Mn-2.72 Si (wt%) alloy by thermomechanical and thermal treatments

X. O. Feng and Q. Sun, Shakedown analysis of shape memory alloy structures, International Journal of Plasticity, vol.23, issue.2, pp.183-206, 2007.
DOI : 10.1016/j.ijplas.2006.04.001

Q. Gu, J. Van-humbeeck, and L. Delaey, A review on the martensitic transformation and shape memory eect in Fe-Mn-Si alloys, Journal de Physique IV, vol.4, pp.135-144, 1994.

G. Guénin, Techniques de l'ingénieur, chapter Alliages à mémoire de forme, p.530, 0114.

G. Guénin, Shape Memory and Pseudoelastic Properties of Fe-Mn-Si and Ti-Ni Based Alloys, Le Journal de Physique IV, vol.07, issue.C5, pp.467-476, 1997.
DOI : 10.1051/jp4:1997574

D. J. Hartl and D. C. Lagoudas, Constitutive modeling and structural analysis considering simultaneous phase transformation and plastic yield in shape memory alloys, Smart Materials and Structures, vol.18, issue.10, 2009.
DOI : 10.1088/0964-1726/18/10/104017

R. Hill, Elastic properties of reinforced solids: Some theoretical principles, Journal of the Mechanics and Physics of Solids, vol.11, issue.5, pp.1379-1409, 1963.
DOI : 10.1016/0022-5096(63)90036-X

K. Rusinko and K. Tanaka, Description of an Fe-based shape memory alloy thermomechanical behavior in terms of the synthetic model, Computational Materials Science, vol.13, pp.218-226, 1999.

M. Huang, X. Gao, and L. C. Brinson, A multivariant micromechanical model for SMAs Part 2. Polycrystal model, International Journal of Plasticity, vol.16, issue.10-11, pp.1371-1390, 2000.
DOI : 10.1016/S0749-6419(00)00014-0

F. Jemal, T. Bouraoui, T. B. Zineb, E. Patoor, and C. Bradai, Modelling of martensitic transformation and plastic slip eects on the thermomechanical behaviour of Fe-based shape memory alloys, Mech. Mater, issue.7, pp.41849-856, 2009.

S. Kajiwara, Characteristic features of shape memory eect and related transformation behavior in Fe-based alloys, Materials Science and Engineering A, pp.273-27567, 1999.

S. Kajiwara and T. Kikuchi, Shape memory effect and related transformation behavior in Fe???Ni???C alloys, Acta Metallurgica et Materialia, vol.38, issue.5, pp.847-855, 1990.
DOI : 10.1016/0956-7151(90)90038-I

S. Kajiwara, D. Liu, T. Kikuchi, and N. Shinya, Remarkable improvement of shape memory effect in Fe-Mn-Si based shape memory alloys by producing NbC precipitates, Scripta Materialia, vol.44, issue.12, pp.2809-2814, 2001.
DOI : 10.1016/S1359-6462(01)00978-2

M. Khaled, J. De-baerdemaeker, N. Van-caenegem, D. Segers, and Y. Houbaert, Inuence of Carbon on the microstructure of a Fe-Mn-Si-Cr-Ni alloy, JMEPEG, 2009.

T. Kirindi, U. Sari, and M. Dikici, The effects of pre-strain, recovery temperature, and bending deformation on shape memory effect in an Fe???Mn???Si???Cr???Ni alloy, Journal of Alloys and Compounds, vol.475, issue.1-2, pp.145-150, 2009.
DOI : 10.1016/j.jallcom.2008.07.014

V. G. Kouznetsova and M. G. Geers, A multi-scale model of martensitic transformation plasticity, Mechanics of Materials, vol.40, issue.8, pp.641-657, 2008.
DOI : 10.1016/j.mechmat.2008.02.004

M. Koyama, T. Sawaguchi, and K. Tsuzaki, Si content dependence on shape memory and tensile properties in Fe???Mn???Si???C alloys, Materials Science and Engineering: A, vol.528, issue.6, pp.2882-2888, 2011.
DOI : 10.1016/j.msea.2010.12.065

E. P. Kwon, S. Fujieda, K. Shinoda, and S. Suzuki, Texture evolution and fcc/hcp transformation in Fe???Mn???Si???Cr alloys by tensile deformation, Materials Science and Engineering: A, vol.527, issue.24-25, pp.6524-6532, 2010.
DOI : 10.1016/j.msea.2010.06.041

D. C. Lagoudas and P. B. Entchev, Modeling of transformation-induced plasticity and its effect on the behavior of porous shape memory alloys. Part I: constitutive model for fully dense SMAs, Mechanics of Materials, vol.36, issue.9, pp.865-892, 2004.
DOI : 10.1016/j.mechmat.2003.08.006

D. C. Lagoudas, P. B. Entchev, P. Popov, E. Patoor, L. C. Brinson et al., Shape memory alloys, Part II: Modeling of polycrystals, Mechanics of Materials, vol.38, issue.5-6, pp.430-462, 2006.
DOI : 10.1016/j.mechmat.2005.08.003

D. C. Lagoudas and B. Zhonghe, Thermomechanical modeling of polycrystalline SMAs under cyclic loading, Part II: material characterization and experimental results for a stable transformation cycle, International Journal of Engineering Science, vol.37, issue.9, pp.1141-1173, 1999.
DOI : 10.1016/S0020-7225(98)00114-1

S. Leclercq and C. Lexcellent, A general macroscopic description of the thermomechanical behavior of shape memory alloys, Journal of the Mechanics and Physics of Solids, vol.44, issue.6, pp.953-980, 1996.
DOI : 10.1016/0022-5096(96)00013-0

H. Li, D. Dunne, and N. Kennon, Factors inuencing shape memory eect and phase transformation behaviour of Fe-Mn-Si based shape memory alloys, Materials Science and Engineering A, pp.273-275517, 1999.

Y. Liu and D. Favier, Stabilisation of martensite due to shear deformation via variant reorientation in polycrystalline NiTi, Acta Materialia, vol.48, issue.13, pp.3489-3499, 2000.
DOI : 10.1016/S1359-6454(00)00129-4

S. Manchiraju and P. M. Anderson, Coupling between martensitic phase transformations and plasticity: A microstructure-based finite element model, International Journal of Plasticity, vol.26, issue.10, pp.1508-1526, 2010.
DOI : 10.1016/j.ijplas.2010.01.009

P. Marinelli, A. Baruj, S. Cotes, A. F. Guillermet, and M. Sade, The ?????????? martensitic transformation in Fe-Mn and Fe-Mn-Co alloys: experiments, thermodynamic analysis and systematics of driving forces, Materials Science and Engineering: A, vol.273, issue.275, pp.273-275498, 1999.
DOI : 10.1016/S0921-5093(99)00387-1

T. Maruyama, T. Kurita, S. Kozaki, K. Andou, S. Farjami et al., Innovation in producing crane rail fishplate using Fe???Mn???Si???Cr based shape memory alloy, Materials Science and Technology, vol.47, issue.8, pp.908-912, 2008.
DOI : 10.2320/matertrans.43.585

O. Matsumura, T. Sumi, N. Tamura, K. Sakao, T. Furukawa et al., Pseudoelasticity in an Fe???28Mn???6Si???5Cr shape memory alloy, Materials Science and Engineering: A, vol.279, issue.1-2, pp.201-206, 2000.
DOI : 10.1016/S0921-5093(99)00644-9

K. Motomichi, S. Takahiro, O. Kazuyuki, K. Takehiko, and M. Masato, The eects of thermomechanical training treatment on the deformation characteristics of Fe-Mn-Si-Al alloys, Materials Science and Engineering A, vol.497, pp.353-357, 2008.

C. Niclaeys, T. B. Zineb, S. Arbab-chirani, and E. Patoor, Determination of the interaction energy in the martensitic state, International Journal of Plasticity, vol.18, issue.11, pp.1619-1647, 2002.
DOI : 10.1016/S0749-6419(02)00032-3

F. Nishimura and K. Tanaka, Phenomenological analysis of thermomechanical training in an Fe-based shape memory alloy, Computational Materials Science, vol.12, issue.1, pp.26-38, 1998.
DOI : 10.1016/S0927-0256(98)00017-2

F. Nishimura, N. Watanabe, and K. Tanaka, Transformation lines in an Fe-based shape memory alloy under tensile and compressive stress states, Materials Science and Engineering: A, vol.221, issue.1-2, pp.134-142, 1996.
DOI : 10.1016/S0921-5093(96)10486-X

F. Nishimura, N. Watanabe, and K. Tanaka, Analysis of uniaxial stress-strain-temperature hysteresis in an Fe-based shape memory alloy under thermomechanical loading, Computational Materials Science, vol.8, issue.4, pp.349-362, 1997.
DOI : 10.1016/S0927-0256(97)00050-5

F. Nishimura, N. Watanabe, and K. Tanaka, Back stress and shape recoverability during reverse transformation in an Fe-based shape memory alloy, Materials Science and Engineering: A, vol.247, issue.1-2, pp.275-284, 1998.
DOI : 10.1016/S0921-5093(97)00841-1

F. Nishimura, N. Watanabe, T. Watanabe, and K. Tanaka, Transformation conditions in an Fe-based shape memory alloy under tensile???torsional loads: martensite start surface and austenite start/finish planes, Materials Science and Engineering: A, vol.264, issue.1-2, pp.232-244, 1999.
DOI : 10.1016/S0921-5093(98)01093-4

F. Nishimura, N. Watanabe, T. Watanabe, and K. Tanaka, Evolution of martensite start condition in general thermomechanical loads of Fe-based shape memory alloy, International Journal of Mechanical Sciences, vol.42, issue.2, pp.347-365, 2000.
DOI : 10.1016/S0020-7403(98)00126-X

H. Otsuka, H. Yamada, T. Maruyama, K. Tanahashi, S. Matsuda et al., Effects of alloying additions on Fe-Mn-Si shape memory alloys., ISIJ International, vol.30, issue.8, pp.674-679, 1990.
DOI : 10.2355/isijinternational.30.674

A. Paiva, M. A. Savi, A. M. Barbosa-braga, P. Manuel-calas-lopes, and . Pacheco, A constitutive model for shape memory alloys considering tensile???compressive asymmetry and plasticity, International Journal of Solids and Structures, vol.42, issue.11-12, pp.3439-3457, 2005.
DOI : 10.1016/j.ijsolstr.2004.11.006

E. Patoor, A. Eberhardt, M. Berveiller, E. Patoor, D. C. Lagoudas et al., Micromechanical Modelling of Superelasticity in Shape Memory Alloys Shape memory alloys, Part I : General properties and modeling of single crystals, Journal de Physique IV Mechanics of Materials, vol.664, issue.38, pp.277-292391, 1996.

B. Peultier, Alliages à mémoire de forme : Modélisation et calcul de structures, Thèse de doctorat, École Nationale Supérieure d'Arts et Métiers, 2005.

B. Peultier, T. B. Zineb, and E. Patoor, Macroscopic constitutive law for SMA: Application to structure analysis by FEM, Materials Science and Engineering: A, vol.438, issue.440, pp.438-440454, 2006.
DOI : 10.1016/j.msea.2006.01.104

B. Peultier, T. B. Zineb, and E. Patoor, Macroscopic constitutive law of shape memory alloy thermomechanical behaviour. Application to structure computation by FEM, Mechanics of Materials, vol.38, issue.5-6, pp.510-524, 2006.
DOI : 10.1016/j.mechmat.2005.05.026

M. Sade, K. Halter, and E. Hornbogen, Transformation behaviour and one-way shape memory effect in Fe-Mn-Si shape memory alloys, Journal of Materials Science Letters, vol.15, issue.1, pp.112-115, 1990.
DOI : 10.1007/BF00722888

L. Saint-sulpice, S. A. Chirani, and S. Calloch, A 3D super-elastic model for shape memory alloys taking into account progressive strain under cyclic loadings, Mechanics of Materials, vol.41, issue.1, pp.12-26, 2009.
DOI : 10.1016/j.mechmat.2008.07.004

URL : https://hal.archives-ouvertes.fr/hal-00449131

T. Sawaguchi, P. Sahu, T. Kikuchi, K. Ogawa, S. Kajiwara et al., Vibration mitigation by the reversible fcc/hcp martensitic transformation during cyclic tension???compression loading of an Fe???Mn???Si-based shape memory alloy, Scripta Materialia, vol.54, issue.11, pp.1885-1890, 2006.
DOI : 10.1016/j.scriptamat.2006.02.013

T. Shiming, L. Jinhai, and Y. Shiwei, Two-way shape memory effect of an Fe-Mn-Si alloy, Scripta Metallurgica et Materialia, vol.25, issue.5, pp.1119-1121, 1991.
DOI : 10.1016/0956-716X(91)90513-Z

N. Siredey, E. Patoor, M. Berveiller, and A. Eberhardt, Constitutive equations for polycrystalline thermoelastic shape memory alloys., International Journal of Solids and Structures, vol.36, issue.28, pp.4289-4315, 1999.
DOI : 10.1016/S0020-7683(98)00196-6

O. Soderberg, X. W. Liu, P. G. Yakovenko, K. Ullakko, and V. K. Lindroos, Corrosion behaviour of Fe???Mn???Si based shape memory steels trained by cold rolling, Materials science and engineering, pp.543-548, 1999.
DOI : 10.1016/S0921-5093(99)00396-2

N. Stanford and D. P. Dunne, Thermo-mechanical processing and the shape memory effect in an Fe???Mn???Si-based shape memory alloy, Materials Science and Engineering: A, vol.422, issue.1-2, pp.352-359, 2006.
DOI : 10.1016/j.msea.2006.02.009

N. Stanford and D. P. Dunne, Effect of Si on the reversibility of stress-induced martensite in Fe???Mn???Si shape memory alloys, Acta Materialia, vol.58, issue.20, pp.6752-6762, 2010.
DOI : 10.1016/j.actamat.2010.08.041

N. Stanford, D. P. Dunne, and H. Li, Re-examination of the effect of NbC precipitation on shape memory in Fe???Mn???Si-based alloys, Scripta Materialia, vol.58, issue.7, pp.583-586, 2008.
DOI : 10.1016/j.scriptamat.2007.11.018

Y. Tomota, W. Nagakawara, K. Tsuzaki, and T. Maki, Reversion of stress-induced ?? martensite and two-way shape memory in Fe-24Mn and Fe-24Mn-6Si alloys, Scripta Metallurgica et Materialia, vol.26, issue.10, pp.1571-1574, 1992.
DOI : 10.1016/0956-716X(92)90258-G

Y. Tomota and K. Yarnaguchi, Inuence of alfa' martensite on shape memory in Fe-Mnbased alloys, Journal de Physique IV, vol.5, pp.421-426, 1995.

C. P. Wang, Y. H. Wen, H. B. Peng, D. O. Xu, and N. Li, Factors affecting recovery stress in Fe???Mn???Si???Cr???Ni???C shape memory alloys, Materials Science and Engineering: A, vol.528, issue.3, pp.1125-1130, 2011.
DOI : 10.1016/j.msea.2010.10.068

C. H. Yang, H. C. Lin, K. M. Lin, and H. K. Tsai, Effects of thermo-mechanical treatment on a Fe???30Mn???6Si shape memory alloy, Materials Science and Engineering: A, vol.497, issue.1-2, pp.445-450, 2008.
DOI : 10.1016/j.msea.2008.07.057

W. Zaki and Z. Moumni, A 3D model of the cyclic thermomechanical behavior of shape memory alloys, Journal of the Mechanics and Physics of Solids, vol.55, issue.11, pp.2427-2454, 2007.
DOI : 10.1016/j.jmps.2007.03.011

W. Zaki and Z. Moumni, A three-dimensional model of the thermomechanical behavior of shape memory alloys, Journal of the Mechanics and Physics of Solids, vol.55, issue.11, pp.2455-2490, 2007.
DOI : 10.1016/j.jmps.2007.03.012

W. Zaki, S. Zamr, and Z. Moumni, An extension of the ZM model for shape memory alloys accounting for plastic deformation, Mechanics of Materials, vol.42, issue.3, pp.266-274, 2010.
DOI : 10.1016/j.mechmat.2009.11.013

J. Zhang, S. Chen, L. Li, and T. Y. Hsu, Analysis of the Stress-Strain Curves of a Fe-Mn-Si Shape Memory Alloy, Materials Characterization, vol.40, issue.1, pp.37-41, 1998.
DOI : 10.1016/S1044-5803(97)00104-6

C. Zhao, Improvement of shape memory eect in Fe-Mn-Si-Cr-Ni alloys, Metallurgical and Materials Transactions A, pp.2599-2604, 1999.

B. Zhonghe and D. C. Lagoudas, Thermomechanical modeling of polycrystalline SMAs under cyclic loading, Part I : theoretical derivations, International Journal of Engineering Science, vol.37, pp.1089-1140, 1999.

B. Zhonghe and D. C. Lagoudas, Thermomechanical modeling of polycrystalline SMAs under cyclic loading, Part III : evolution of plastic strains and two way shape memory eect, International Journal of Engineering Science, vol.37, pp.1175-1203, 1999.