Bazele proceselor de deformare plastic?, p.8, 1983. ,
Alegerea si utilizarea materialelor metalice, Irregularity in Friction Hills during the Cold Rolling of Materials, 1997. ,
Profilwalzen ? Stand und Entwicklung des Verfahrens in der metallverarbeitenden Industrie, Fertigungstechnick und Betrieb, pp.206-209, 1984. ,
Diagnosis of involutometric issues in flat rollig of external helical gears through the use of finite element models, International Journal Of Machine Tools & Manufacture, pp.1257-1262, 2007. ,
Investigation of work hardening of flat-rolled helical-involute gears through grain-flow analysis, FEmodeling , and strain signature An improved analytical decription of orthotropy in metallic sheets, Pag. 1285?1291. [BAN 05] 2D asperity deformation of stainless steel strip in cold rolling, pp.1-15, 2005. ,
Introducere în metoda elementelor finite Deformare volumica rotativa la rece, On Plastic Deformation during Soft-Reduction Rolling, pp.13-19, 1995. ,
A criterion for description of anisotropy and yield differential effects in pressure-insensitive metals, International Journal of Plasticity, vol.20, issue.11, 2004. ,
DOI : 10.1016/j.ijplas.2003.11.021
Teoria deformarii plastice, Editura Didactica si Pedagogica Bucuresti [CHA 09] Charpentier, I, de Sensibilidad y Modelaci´on Inversa: El caso de las columnas plinianas, 1981. ,
Stability analysis of the rolling process and regenerative chatter on 2030 tandem mills, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol.73, issue.2, 2002. ,
DOI : 10.1115/1.3438305
A practical method for finite element ring rolling simulation using the ALE flow formulation, International Journal of Mechanical Sciences, vol.44, issue.1, pp.165-190, 2002. ,
DOI : 10.1016/S0020-7403(01)00080-7
New Methods for Severe Plastic Deformation Processing, Journal of Sciences, vol.51, pp.846-855, 2009. ,
Constitutive modelling of orthotropic plasticity in sheet metals, Journal of the Mechanics and Physics of Solids, vol.38, issue.3, pp.405-417, 1990. ,
DOI : 10.1016/0022-5096(90)90006-P
Analysis of local loads on the draw die profile with regard to wear using the FEM and experimental investigations, Journal of Materials Processing Technology, vol.115, issue.1, pp.153-158, 2001. ,
DOI : 10.1016/S0924-0136(01)00757-9
FEM simulation of the forming of textured aluminum sheets, Materials Science and Engineering: A, vol.256, issue.1-2, 1998. ,
DOI : 10.1016/S0921-5093(98)00813-2
A study of the helical effect on the thread connection by three dimensional finite element analysis A parametric study of process parameters in external thread rolling, Energy Consumption during In-Plane Rolling, pp.326-328, 1999. ,
Development of an integrated CAD/CAE/CAM system on taper-tipped thread-rolling die-plates, Journal of Materials Processing Technology, vol.177, issue.1-3, pp.98-103, 2006. ,
DOI : 10.1016/j.jmatprotec.2006.04.082
Steady state finite element simulation of bar rolling processes based on rigid-viscoplastic approach, International Journal for Numerical Methods in Engineering, vol.10, issue.11, pp.1583-1603, 2005. ,
DOI : 10.2355/isijinternational.43.1967
Fatigue strength and residual stress of groove-rolled products, Journal of Materials Processing Technology, vol.194, issue.1-3, pp.46-51, 2007. ,
DOI : 10.1016/j.jmatprotec.2007.03.124
Metal flow in wedge indentation of V- and W-shaped tools, Journal of Materials Processing Technology, vol.189, issue.1-3, pp.393-400, 2007. ,
DOI : 10.1016/j.jmatprotec.2007.02.011
Modeling and numerical analysis of the thread rolling process, PAMM, vol.6, issue.1, pp.745-746, 2006. ,
DOI : 10.1002/pamm.200610353
The numerical analysis of the trapezoidal thread rolling process, PAMM · Proc. Appl. Math. Mech, pp.4010027-4010028, 2007. ,
The Numerical Analysis of the External Round Thread Rolling, PAMM, vol.8, issue.1, pp.10731-10732, 2008. ,
DOI : 10.1002/pamm.200810731
The numerical analysis of the external round thread rolling, Journal of Materials Processing Technology, 2005. ,
Finite element simulation of quench distortion in a low-alloy steel incorporating transformation kinetics, Acta Materialia, vol.56, issue.7, pp.1482-1490, 2008. ,
DOI : 10.1016/j.actamat.2007.11.039
Le roulage de filets se substitue au filetage, Machine Moderne, nr, pp.91-94, 1980. ,
Nonlinear modeling for elasto/visco-plastic contact problem in technological processes, The Technical University of Koszalinul, 2003. ,
Deformation behaviors and conditions in L-section profile cold ring rolling, Journal of Materials Processing Technology, vol.209, pp.5087-5096, 2009. ,
Prediction of rolling force and deformation in three-dimensional cold rolling by using the finite element method and a neural network Advanced manufacturing technology, 2002. ,
An investigation of contact problem between strip and work roll with a smooth straight surface during cold rolling, International Journal of Mechanical Sciences, vol.39, issue.12, 1997. ,
DOI : 10.1016/S0020-7403(97)00022-2
Dynamic Shearing Resistance of Molten Metal Films Under High Pressures and Extremely High Shearing Rates, Experimental Mechanics, pp.161-172, 2002. ,
Formage àgrande vitesse. Détermination d'une loi de coportement, 2005. ,
Theoretical and experimental studies for the behavior determination of same steels at the cold plastic deformation, ModTech International Conference, pp.20-22, 2010. ,
Study concerning determination of the laws of behavior of materials used for the radial cold rolling, AUTOMOTIVE Series, year XV, vol.10, issue.20, pp.10-16, 2010. ,
A finite element evaluation of residual stress in a thread form generated by a cold rolling process, McB 95 Threads rolling on CNC ?, Cutting Tool Engineering, pp.64-70, 1995. ,
Predicting polygonal-shaped defects during hot ring rolling using a rigid-viscoplastic finite element method, International Journal of Mechanical Sciences, vol.50, issue.2, pp.306-314, 2008. ,
DOI : 10.1016/j.ijmecsci.2007.06.004
Extreme conditions of rolling friction, Steel in Translation, vol.37, issue.4, pp.398-404, 2007. ,
DOI : 10.3103/S0967091207040195
Formage des tubes métalliques, Procédés ? Analyse détaillée du laminage à pas de pèlerin, 2005. ,
Experimental and numerical analysis of the cup drawing test for orthotropic metal sheets Rolling of inside threads in plastic materials, Journal of Materials Processing Technology Journal of Materials Processing Technology, vol.108, pp.632-634, 1977. ,
Presarea volumic? la rece a pieselor cu filet ?i dantur? Stadiul actual al cercet?rilor privind prelucrarea prin rulare la rece, Referatul nr, 1994. ,
Evaluation of microhardness, effective stress and residual stress in cold rolling of complex profiles ? comparison between experiments and calculations, The Annals of Dunarea de Jos " Fascicle V, Technologies In Machine Building Analytical modeling of the process of cold rolling by in-feed method ? part II A study on the type of mesh of the workpiece used for numerical modeling of the thread rolling process, Cotributii la studiul la studiul calitatii stratului superficial obtinut prin rulare la rece-modeling of cold rolling by in-feed method of circular grooves, revista Strojni?ki vestnik -Journal of Mechanical Engineering, pp.4-6, 2000. ,
Solution to the Problem of Longitudinal-Force Equilibrium in the Deformation Zone during Flat Rolling New method of thread rolling, Finite element analysis of cross wedge rolling, pp.201-208, 2004. ,
Numerical modelling of the metal flow during the rolling process of the round screw-ribbed bar in the finishing pass Role of surface texture of harder surface on subsurface deformation, Journal of Materials Processing Technology Wear, pp.103-109, 2006. ,
3D Analysis of coldrolling using a constitutive model for interface friction, International Journal of Mechanical Sciences, vol.46, pp.653-671, 1984. ,
Realizarea melcilor de la contoarele electrice prin deformare plastic? la rece, Construc?ia de ma?ini, nr, pp.23-28, 1982. ,
Finit element simulation of sever plastic deformation processes, Journal of Materials Processing Technology, 2007. ,
Synthetic theory of irreversible deformation in the context of fundamental bases of plasticity Walzen gewindeförmiger Profile, Werkstat und Betrieb, v.115, nr Comparison of implicit and explicit finite element methods for dynamic problems, Study of the longitudinal stability of strip made of copper alloys during rolling in the vertical rolls of a strip mill, pp.675-679, 1982. ,
Numerical modelling of the metal flow during the rolling process of the round screw-ribbed bar in the finishing pass, Prelucrari prin deformare plastica la rece, 1988. ,
DOI : 10.1016/j.jmatprotec.2006.04.035
Tehnologi de prelucrare a profilelor prin deformare plastica la rece, Ghid de proiectare A paradox of severe plastic deformaion in metals, Doklady Physics, vol.46, pp.633-635, 2001. ,
On the optimization of a rolling-force model for a hot strip finishing line, ISA Transactions, vol.46, issue.4, pp.527-531, 2007. ,
DOI : 10.1016/j.isatra.2007.02.008
Finite Element Modeling for Tap Design Improvement in Form Tapping, Journal of Manufacturing Science and Engineering, vol.105, issue.1, pp.65-73, 2006. ,
DOI : 10.1016/S0167-6636(97)00036-7
Roll pass evaluation for three-dimensional section rolling using a simplified finite element method, School of Manufacturing and Mechanical Engineering, The University of Birmingham, 1977. ,