L. Aitchison and W. I. Pumphrey, A study of the properties of steels and the principles governing their selection for engineering applications, 1953.

J. Kouhi, A. Talja, P. Salmi, and T. Ala-outinen, Current R&D work on the use of stainless steel in construction in Finland, Journal of Constructional Steel Research, vol.54, issue.1, pp.31-50, 2000.
DOI : 10.1016/S0143-974X(99)00054-1

F. Velasco, G. Blanco, A. Bautista, and M. A. Martínez, Effect of welding on local mechanical properties of stainless steels for concrete structures using universal hardness tests, Construction and Building Materials, vol.23, issue.5, pp.1883-1891, 2009.
DOI : 10.1016/j.conbuildmat.2008.09.025

A. Bautista, G. Blanco, F. Velasco, and M. A. Mart?nez, Corrosion performance of welded stainless steels reinforcements in simulated pore solutions, Construction and Building Materials, vol.21, issue.6, pp.1267-1276, 2007.
DOI : 10.1016/j.conbuildmat.2006.03.007

A. Bouchaïr, J. Averseng, and A. Abidelah, Analysis of the behavior of stainless steel bolted connections, Journal of Constructional Steel Research, vol.7, issue.9, pp.1-11, 2008.

G. Malumbela and M. Alexander, Variation of steel loss and its effect on the ultimate flexural capacity of RC beams corroded and repaired under load, Construction and Building Materials, vol.24, issue.6, pp.1051-1059, 2010.
DOI : 10.1016/j.conbuildmat.2009.11.012

M. A. Anis, B. J. Farid, and A. I. Janabi, Stress-Strain Relationship for Concrete in Compression Madel of Local Materials, JKAU: Eng. Sci, vol.2, pp.83-94, 1990.

B. Winkler, G. Hofstetter, and H. Lehar, Application of a constitutive model for concrete to the analysis of a precast segmental tunnel lining, International Journal for Numerical and Analytical Methods in Geomechanics, vol.28, issue.78, pp.797-819, 2004.
DOI : 10.1002/nag.362

H. Sooriyaarachchi, K. Pilakoutas, and E. Byars, Tension stiffening behavior of GFRP-reinforced concrete, 7th International Symposium on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures (FRPRCS-7), 2005.

H. Peter, R. Bischoff, and . Paixao, Tension stiffening and cracking of concrete reinforced with glass fiber reinforced polymer (GFRP) bars, Can, J. Civ, 2004.

Y. Sato and F. J. Vecchio, Tension Stiffening and Crack Formation in Reinforced Concrete Members with Fiber-Reinforced Polymer Sheets, Journal of Structural Engineering, vol.129, issue.6, pp.717-724, 2003.
DOI : 10.1061/(ASCE)0733-9445(2003)129:6(717)

C. Choi and S. Cheung, Tension stiffening model for planar reinforced concrete members, Computers & Structures, vol.59, issue.1, pp.179-190, 1994.
DOI : 10.1016/0045-7949(95)00146-8

E. Ellobod, Nonlinear behavior of concrete-filled stainless steel stiffened slender tube columns, Thin-Walled Structures, vol.45, issue.3, pp.259-273, 2007.
DOI : 10.1016/j.tws.2007.02.011

D. Delarbre and P. Montmitonnet, Experimental and numerical study of the ironing of stainless steel cups, Journal of Materials Processing Technology, vol.91, issue.1-3, pp.95-104, 1999.
DOI : 10.1016/S0924-0136(98)00431-2

URL : https://hal.archives-ouvertes.fr/hal-00542135

E. Bartali, A. Aubin, V. Degallaix, and S. , Surface observation and measurement techniques to study the fatigue damage micromechanisms in a duplex stainless steel, International Journal of Fatigue, vol.31, issue.11-12, pp.1-7, 2009.
DOI : 10.1016/j.ijfatigue.2008.11.003

URL : https://hal.archives-ouvertes.fr/hal-00761259

R. Makkouk, N. Bourgeois, J. Serri, B. Bolle, M. Martiny et al., Experimental and theoretical analysis of the limits to ductility of type 304 stainless steel sheet, European Journal of Mechanics - A/Solids, vol.27, issue.2, pp.181-194, 2008.
DOI : 10.1016/j.euromechsol.2007.04.004

URL : https://hal.archives-ouvertes.fr/hal-00257343

M. Theofanous, T. M. Chan, and L. Gardner, Structural response of stainless steel oval hollow section compression members, Engineering Structures, vol.31, issue.4, 2009.
DOI : 10.1016/j.engstruct.2008.12.002

K. Abdella, Explicit full-range stress???strain relations for stainless steel at high temperatures, Journal of Constructional Steel Research, vol.65, issue.4, pp.794-800, 2009.
DOI : 10.1016/j.jcsr.2008.09.001

F. Velasco, G. Blanco, A. Bautista, and M. A. Martínez, Effect of welding on local mechanical properties of stainless steels for concrete structures using universal hardness tests, Construction and Building Materials, vol.23, issue.5, pp.1883-1891, 2009.
DOI : 10.1016/j.conbuildmat.2008.09.025

L. Gardner and N. R. Baddoo, Fire testing and design of stainless steel structures, Journal of Constructional Steel Research, vol.62, issue.6, pp.532-543, 2006.
DOI : 10.1016/j.jcsr.2005.09.009

C. A. Apostolopoulos, M. , and D. , Mechanical Properties of Reinforcing Steel and Fatigue Behavior in Corrosive Environment, Journal of Materials Engineering and Performance, vol.2, issue.7, pp.559-566, 2007.
DOI : 10.4324/9780203414606

J. H. Choi, Seismic retrofit of reinforced concrete circular columns using stainless steel wire mesh composite, Canadian Journal of Civil Engineering, vol.84, issue.2, pp.140-147, 2008.
DOI : 10.1061/(ASCE)0733-9445(1988)114:8(1804)

B. Tighiouart, B. Benmokrane, and D. Gao, Investigation of bond in concrete member with fibre reinforced polymer (FRP) bars, Construction and Building Materials, vol.12, issue.8, pp.453-462, 1998.
DOI : 10.1016/S0950-0618(98)00027-0

C. K. Choi and S. H. Cheung, Tension stiffening model for planar reinforced concrete members, Computers & Structures, vol.59, issue.1, pp.179-190, 1996.
DOI : 10.1016/0045-7949(95)00146-8

W. F. Steven, L. Y. Tsang, and . Chu, An experimental study of the Tension Stiffening effect on the structural stiffness of Reinforced Concrete Cantilevered Balcony Structures using resonant frequency measurement approach, Construction and Building Materials, vol.25, pp.2690-2699, 2011.

Y. Zhou and Y. Wu, General model for constitutive relationships of concrete and its composite structures, Composite Structures, pp.1-13, 2011.

R. Nayal and H. A. Rasheed, Tension Stiffening Model for Concrete Beams Reinforced with Steel and FRP Bars, Journal of Materials in Civil Engineering, vol.18, issue.6, pp.831-841, 2006.
DOI : 10.1061/(ASCE)0899-1561(2006)18:6(831)

A. K. Chopra, Dynamics of Structure, Theory and Applications to Earthquake Engineering 2nd edition, 2001.

R. Pinho, C. Casarotti, and S. A. Antoniou, A comparison of single-run pushover analysis techniques for seismic assessment of bridges, Earthquake Engineering & Structural Dynamics, vol.5, issue.10, pp.1347-1362, 2007.
DOI : 10.12989/sem.2001.12.1.051

K. Kawashima, Seismic Damage of Bridges in Past Earthquake. Presentation of Lecture Note Chapter 6, 2006.

G. Parke and N. Hewson, ICE Manual of Bridge Engineering. Institution of Civil Engineer, 2008.

C. International and . Council, Uniform Building Code 1997: Structural Design Requirement (Division 5 ? Soil Profile Type). California, 1997.

K. G. Samuel, Dependence of strength and ductility ratios in austenitic stainless steels, International Journal of Pressure Vessels and Piping, vol.83, issue.6, pp.474-476, 2006.
DOI : 10.1016/j.ijpvp.2006.02.024

J. Kim and . Rasmussen, Full-range stress-strain curves for stainless steel alloys, Research Report, issue.R811, 2001.

W. Ramberg and W. R. Osgood, Description of stress-strain curves by three parameters, Technical Note No. 902, NASA Scientific and Technical Information Facility, 1943.

C. Soranakom and B. Mobasher, Correlation of tensile and flexural responses of strain softening and strain hardening cement composites, Cement and Concrete Composites, vol.30, issue.6, pp.465-477, 2008.
DOI : 10.1016/j.cemconcomp.2008.01.007

C. Garion, B. Skoczen´, and S. Sgobba, Constitutive modelling and identification of parameters of the plastic strain-induced martensitic transformation in 316L stainless steel at cryogenic temperatures, International Journal of Plasticity, vol.22, issue.7, pp.1234-1264, 2006.
DOI : 10.1016/j.ijplas.2005.08.002

M. A. Crisfield and J. Wills, Analysis Of R/C Panels Using Different Concrete Models, Journal of Engineering Mechanics, vol.115, issue.3, pp.578-597, 1989.
DOI : 10.1061/(ASCE)0733-9399(1989)115:3(578)

R. Meiswinkel and H. Rahm, Modeling tension stiffening in RC structures regarding nonlinear design analyses, Proceedings ECCM 1999, European Conference on Computational Mechanics, 1999.

A. Nour, B. Massicotte, E. Yildiz, and V. Koval, Finite element modeling of concrete structures reinforced with internal and external fibrereinforced polymers, Can, J. Civ. Eng, vol.34, pp.340-354, 2007.

A. Bouzaiene and B. Massicotte, Hypoelastic Tridimensional Model for Nonproportional Loading of Plain Concrete, Journal of Engineering Mechanics, vol.123, issue.11, pp.1111-1119, 1997.
DOI : 10.1061/(ASCE)0733-9399(1997)123:11(1111)

Y. R. Rachid, Ultimate strength analysis of reinforced concrete pressure vessels, Nuclear Engineering and Design, vol.7, pp.334-355, 1968.

J. Becque and K. J. Rasmussen, Experimental Investigation of the Interaction of Local and Overall Buckling of Stainless Steel I-Columns, Journal of Structural Engineering, vol.135, issue.11, pp.1340-1348, 2009.
DOI : 10.1061/(ASCE)ST.1943-541X.0000051

A. W. Beeby and R. H. Scott, Mechanisms of Long-Term Decay of Tension Stiffening. Magazine of Concrete Research, pp.255-266, 2006.

P. H. Bischoff and R. Paixao, Tension Stiffening and Cracking of Concrete Reinforced with Glass Fiber Reinforced Polymer (GFRP) Bars. Can, J. Civ. Eng, vol.31, pp.579-588, 2004.

A. Bouchou and P. Delobelle, Behaviour and modelization of a 17-12 SPH stainless steel under cyclic, unidirectional and bidirectional anisothermal loadings, Nuclear Engineering and Design, vol.162, issue.1, pp.21-45, 1996.
DOI : 10.1016/0029-5493(95)01138-2

M. A. Dabaon, M. H. El-boghdadi, and M. F. Hassanein, Experimental investigation on concrete-filled stainless steel stiffened tubular stub columns, Engineering Structures, vol.31, issue.2, pp.300-307, 2009.
DOI : 10.1016/j.engstruct.2008.08.017

P. Delobelle and A. Bouchou, Behavior and modeling of a 17-12 SPH stainless steel under cyclic, uni and bidirectional, anisothermal loadings. Part II: Modeling, International Journal of Plasticity, vol.12, issue.3, pp.311-341, 1996.
DOI : 10.1016/S0749-6419(96)00010-1

D. Sarno, L. Elnashai, A. S. Nethercot, and D. A. , Seismic performance assessment of stainless steel frames, Journal of Constructional Steel Research, vol.59, issue.10, pp.1289-1319, 2003.
DOI : 10.1016/S0143-974X(03)00067-1

D. Sarno, L. Elnashai, A. S. Nethercot, and D. A. , Seismic retrofitting of framed structures with stainless steel, Journal of Constructional Steel Research, vol.62, issue.1-2, pp.93-104, 2006.
DOI : 10.1016/j.jcsr.2005.05.007

F. Fardoun, J. Pola´k, and S. Degallaix, Internal and effective stress analysis in stainless steels using the statistical approach method, Materials Science and Engineering: A, vol.234, issue.236, pp.234-236, 1997.
DOI : 10.1016/S0921-5093(97)00297-9

R. Feng and B. Young, Behaviour of concrete-filled stainless steel tubular X-joints subjected to compression, Thin-Walled Structures, vol.47, issue.4, pp.365-374, 2009.
DOI : 10.1016/j.tws.2008.09.006

G. Fischer and V. C. Li, Influence of Matrix Ductility on Tension-Stiffening Behavior of Steel Reinforced Engineered Cementitious Composites (ECC), ACI Structural Journal, vol.99, pp.1-65, 2002.

M. Inel and H. B. Ozmen, Effects of plastic hinge properties in nonlinear analysis of reinforced concrete buildings, Engineering Structures, vol.28, issue.11, pp.1494-1502, 2006.
DOI : 10.1016/j.engstruct.2006.01.017

K. J. Lee, M. S. Chun, M. H. Kim, L. , and J. M. , A new constitutive model of austenitic stainless steel for cryogenic applications, Computational Materials Science, vol.46, issue.4, pp.1152-1162, 2009.
DOI : 10.1016/j.commatsci.2009.06.003

M. Macdonald, J. Rhodes, and M. Kotelko, Stainless steel stub columns subject to combined bending and axial loading, Thin-Walled Structures, vol.45, issue.10-11, pp.893-897, 2007.
DOI : 10.1016/j.tws.2007.08.044

A. Mortezaei and A. Kheyroddin, Nonlinear Analysis of RC Flanged Shear Walls Considering Tension-Stiffening Effect, Journal of Applied Sciences, vol.8, issue.3, pp.394-406, 2008.
DOI : 10.3923/jas.2008.394.406

Y. L. Mo and R. H. Han, Cyclic load tests on prestressed concrete model frames, Engineering Structures, vol.18, issue.4, pp.311-320, 1996.
DOI : 10.1016/0141-0296(95)00038-0

S. Y. Noh, Tension Stiffening Model for Numerical Analysis of RC Structures by Using Bond-Slip Relationship, Journal of Advanced Concrete Technology, vol.7, issue.1, pp.61-78, 2009.
DOI : 10.3151/jact.7.61

A. Nour, B. Massicotte, E. Yildiz, and V. Koval, Finite element modeling of concrete structures reinforced with internal and external fibre-reinforced polymers, Canadian Journal of Civil Engineering, vol.28, issue.4, pp.340-354, 2007.
DOI : 10.1002/nag.362

J. Pola´k, F. Fardoun, and S. Degallaix, Analysis of the Hysteresis Loop in Stainless Steels I. Austenitic and Ferritic Steels, Materials Science and Engineering, 2001.

J. Pola´k, F. Fardoun, and S. Degallaix, Analysis of the hysteresis loop in stainless steels II. Austenitic???ferritic duplex steel and the effect of nitrogen, Materials Science and Engineering: A, vol.297, issue.1-2, pp.154-161, 2001.
DOI : 10.1016/S0921-5093(00)01252-1

H. Salem, B. Hauke, and K. Maekawa, Fracture of Concrete Cover-its Effect on Tension Stiffening and Modelling, Journal of Materials, Conc. Struct, vol.42, pp.295-307, 1999.

Y. Sato and F. J. Vecchio, Tension Stiffening and Crack Formation in Reinforced Concrete Members with Fiber-Reinforced Polymer Sheets, Journal of Structural Engineering, vol.129, issue.6, pp.6-717, 2003.
DOI : 10.1061/(ASCE)0733-9445(2003)129:6(717)

R. S. Stramandinoli, L. Rovere, and H. L. , An efficient tension-stiffening model for nonlinear analysis of reinforced concrete members, Engineering Structures, vol.30, issue.7, pp.2069-2080, 2008.
DOI : 10.1016/j.engstruct.2007.12.022

A. A. Tavassoli, Assessment of austenitic stainless steels, Fusion Engineering and Design, vol.29, pp.371-390, 1995.
DOI : 10.1016/0920-3796(95)80044-X

G. M. Verderma, G. Fabbrocino, and G. Manfredi, Seismic Response of R.C. Columns with Smooth Reinforcement, 2008.

C. C. Weng, Y. L. Yin, J. C. Wang, and C. Y. Liang, Seismic cyclic loading test of SRC columns confined with 5-spirals, Science in China Series E: Technological Sciences, vol.20, issue.1, pp.529-555, 2008.
DOI : 10.1007/s11431-008-0067-z

H. Q. Wu and R. I. Gilbert, Modeling short-term tension stiffening in reinforced concrete prisms using a continuum-based finite element model, Engineering Structures, vol.31, issue.10, pp.2380-2391, 2009.
DOI : 10.1016/j.engstruct.2009.05.012

Q. Xu and D. R. Hayhurst, The evaluation of high-stress creep ductility for 316 stainless steel at 550 ??C by extrapolation of constitutive equations derived for lower stress levels, International Journal of Pressure Vessels and Piping, vol.80, issue.10, pp.689-694, 2003.
DOI : 10.1016/j.ijpvp.2003.08.005

Y. L. Voo, B. Nematollahi, A. Bakar-bin, M. Said, A. Balamurugan et al., Application of Ultra-High Performance Fiber Reinforced Concrete ? The Malaysia Perspective, International Journal of Sustainable Construction Engineering & Technology, vol.3, issue.1, 2012.

A. Kamen, E. Denarie´, H. Sadouki, and E. Bruhwiler, UHPFRC tensile creep at early age, Materials and Structures, vol.13, issue.74, pp.113-122, 2009.
DOI : 10.1617/s11527-008-9371-0

P. Acker and M. Behloul, Ductal® Technology: A Large Spectrum of Properties, A Wide Range of Applications, Behavior of Inoxydable Steel and their Performance as Reinforcement Bars in Concrete Beam: Experimental and Nonlinear Finite Element Analysis, Construction and Building Materials, pp.481-492, 2004.

]. S. Alih and A. , Tension Stiffening Parameter in Composite Concrete Reinforced with Inoxydable Steel: Laboratory and Finite Element Analysis, World Academy of Science, Engineering and Technology, vol.62, issue.2, pp.535-540, 2012.

S. Alih and A. , Developing Tension Stiffening Model for Concrete Beam Reinforced with Inoxydable Steel through Inverse Method, submitted in Composite Structure Determination of Tension Stiffening Phenomenon in Composite Concrete Reinforced with Inoxydable Steel and Ultra-high performance fibre-reinforced concrete, UHPFRC, submitted in Composite Structure, Performance of Inoxydable Steel in Composite Concrete Structure Subjected to Seismic Load, submitted in Construction and Building Materials. [6] S. Alih, A. Khelil Developing Tension Stiffening Model for Concrete Beam Reinforced with Inoxydable Steel through Inverse Method, XXX e Rencontres AUGC- IBPSA Chambéry Effet de Raidissement en Traction du Béton avec des Armatures Inox, Treizième édition des Journées scientifiques du Regroupement Francophone pour la Recherche et la Formation sur le Béton (RF) 2 B, 2012.