M. Nifuku, H. Tsujita, K. Fujino, K. Takaichi, C. Barre et al., Ignitability assessment of shredder dusts of refrigerator and the prevention of the dust explosion, Journal of Loss Prevention in the Process Industries, vol.19, issue.2-3, pp.181-186, 2006.
DOI : 10.1016/j.jlp.2005.04.007

V. A. Dahoe, Dust Explosions : a study of Flame Propagation, 2000.

W. Bartknecht, Dust Explosions : Course, Prevention, Protection, 1989.
DOI : 10.1007/978-3-642-73945-3

. Barpi, Base de données ARIA du ministère de l'écologie et du développement durable français, 1992.

C. Proust, Formation-Inflammation-Combustion des atmosphères explosives (ATEX) et effets associés, Génie des procédés, vol.278, 2004.

A. Janès and J. Chaineaux, Explosions de poussières dans les lieux de travail recensement et analyse, 2010.

J. M. Petit, Les mélanges explosifs ? partie 2 : Poussières combustibles, INRS, vol.944, 2006.

P. and E. Bocanegra, Études expérimentales et modélisation de la combustion des nuages de particules micrométriques et nanométriques d'aluminium, 2007.

M. Traoré, Explosions de poussières et de mélanges hybrides Etude paramétrique et relation entre la cinétique de combustion et la violence de l'explosion, 2007.

J. Nagy and H. C. Verakis, Development and control of dust explosions, 1983.

G. Joseph, Combustible dusts: A serious industrial hazard, Journal of Hazardous Materials, vol.142, issue.3, pp.589-591, 2007.
DOI : 10.1016/j.jhazmat.2006.06.127

C. Proust, Dust explosions in pipes: A review, Journal of Loss Prevention in the Process Industries, vol.9, issue.4, pp.267-277, 1996.
DOI : 10.1016/0950-4230(96)00010-1

URL : https://hal.archives-ouvertes.fr/ineris-00962653

E. Mallard and H. L. Chatelier, Recherches expérimentales et théoriques sur la combustion des mélanges gazeux explosives

C. Lacour, Stabilité de flammes laminaires partiellement prémélangées -Application aux bruleurs domestiques, 2006.

C. Tanford and R. N. Pease, Theory of Burning Velocity. II. The Square Root Law for Burning Velocity, The Journal of Chemical Physics, vol.3, issue.12, pp.861-865, 1947.
DOI : 10.1063/1.1746560

P. G. Van, Ignition and propagation of dust explosions, 1993.

G. Leuschke, Beitrage zur erforschung des mechanismus der flammenausbreitung in staubwolken, Staub, vol.25, pp.180-186, 1965.

P. Goral, R. Klemens, and P. Wolanski, Mechanism of gas flame acceleration in the presence of neutral particles, pp.325-335, 1988.

G. Gmurczyk and R. Klemens, Effect of non-homogeneous coal particle distribution on combustion aerodynamics, AIAA Progress in Astronautics and Aeronautics, pp.102-111, 1988.

B. Lewis and G. Von-elbe, Combustion, Flames and Explosions of Gases, 1987.

G. Joulin, La théorie des flammes, 1986.

R. Blouquin, Contribution à l'étude théorique des interactions entre combustion et rayonnement [26] A. Vignes. Evaluation de l'inflammabilité et de l'explosivité des nanopoudres : une démarche essentielle pour la maîtrise des risques, 1996.

A. Laurent, Sécurité des Procédés Chimiques -connaissances de base et méthodes d'analyse de risques (2e édition), 2011.

T. Iijima and T. Takeno, Effects of temperature and pressure on burning velocity, Combustion and Flame, vol.65, issue.1, pp.35-43, 1986.
DOI : 10.1016/0010-2180(86)90070-2

M. Matgalchi and J. Keck, Laminar burning velocity of propane-air mixtures at high temperature and pressure, Combustion and Flame, vol.38, pp.143-154, 1980.
DOI : 10.1016/0010-2180(80)90046-2

M. Silvestrini, B. Genova, F. J. , and L. Trujillo, Correlations for flame speed and explosion overpressure of dust clouds inside industrial enclosures, Journal of Loss Prevention in the Process Industries, pp.374-392, 2008.
DOI : 10.1016/j.jlp.2008.01.004

G. E. Andrews and D. Bradley, Determination of burning velocities: A critical review, Combustion and Flame, vol.18, issue.1, pp.133-153, 1972.
DOI : 10.1016/S0010-2180(72)80234-7

K. O. Engler, Beitrage zur Kenntniss der Staubexplosionen, J, p.1885

K. L. Cashdollar, Overview of dust explosibility characteristics, Journal of Loss Prevention in the Process Industries, vol.13, issue.3-5, pp.183-199, 2000.
DOI : 10.1016/S0950-4230(99)00039-X

K. L. Cashdollar and M. Hertzberg, Industrial dust explosions. ASTM Special Technical Publication 958, 1987.

H. Franke, Bestimmung der mindestzündenergie von kohlenstaub/methan/luft gemisches (hybride. gemische). VDI-Berichte, pp.69-72, 1978.

G. Pellmont, Explosions und Zündverhalten von hybriden Gemischen aus brennbaren Stäuben und Brenngasen, Swiss Federal Institute of Technology (EHT), 1979.

K. Chatrathi, Dust and hybrid explosibility in a 1 m3 spherical chamber, Process Safety Progress, pp.183-189, 1994.
DOI : 10.1002/prs.680130403

R. K. Eckhoff, Dust explosion in the process industries, 2003.

J. Nagy and W. M. Portman, Explosibility of coal dust in an atmosphere containing a low percentage of methane, 1961.

J. G. Torrent and J. C. Fuchs, Flammability and explosion propagation of methane/coal dust hybrid mixtures, 23rd Int. Conf. of the Safe Mining Research Institute, 1989.

R. Pilão, E. Ramalho, and C. Pinho, Explosibility of cork dust in methane/air mixtures, Journal of Loss Prevention in the Process Industries, vol.19, issue.1, pp.17-23, 2006.
DOI : 10.1016/j.jlp.2005.05.001

A. Denkevits, Explosibility of hydrogen???graphite dust hybrid mixtures, Journal of Loss Prevention in the Process Industries, pp.698-707, 2007.
DOI : 10.1016/j.jlp.2007.04.033

R. Sanchirico, A. D. Benedetto, A. Garcia-agreda, and P. Russo, Study of the severity of hybrid mixture explosions and comparison to pure dust???air and vapour???air explosions, Journal of Loss Prevention in the Process Industries, pp.648-655, 2011.
DOI : 10.1016/j.jlp.2011.05.005

S. Home and . Kühner, AG -shaker, safety testing devices, lab equipment, 2011.

P. Amyotte, M. Lindsay, R. Domaratzki, N. Marchand, A. D. Benedetto et al., Prevention and mitigation of dust and hybrid mixture explosions, Process Safety Progress, vol.14, issue.1, pp.17-21, 2010.
DOI : 10.1002/9780470938379

C. J. Dahn, M. Ashum, and K. Williams, Contribution of low-level flammable vapor concentrations to dust explosion output, Plant/Operations Progress, vol.5, issue.1, pp.57-64, 1986.
DOI : 10.1002/prsb.720050114

O. Dufaud, L. Perrin, and M. Traoré, Dust/vapour explosions : Hybrid behaviours ? Journal of Loss Prevention in the Process Industries, pp.481-484, 2008.

O. Dufaud, L. Perrin, M. Traoré, S. Chazelet, and D. Thomas, Explosions of vapour/dust hybrid mixtures: A particular class, Powder Technology, vol.190, issue.1-2, pp.269-273, 2009.
DOI : 10.1016/j.powtec.2008.04.046

URL : https://hal.archives-ouvertes.fr/hal-00508580

B. Veyssière, Development and propagation regimes of dust explosions, Powder Technology, vol.71, issue.2, pp.171-180, 1992.
DOI : 10.1016/0032-5910(92)80006-I

B. Veyssière and B. A. Khasainov, A model for steady, plane, double-front detonations (DFD) in gaseous explosive mixtures with aluminum particles in suspension, Combustion and Flame, vol.85, issue.1-2, pp.241-253, 1991.
DOI : 10.1016/0010-2180(91)90191-D

D. Bradley, G. Dixon-lewis, and S. , Lean flammability limits and laminar burning velocities of CH4-air-graphite mixtures and fine coal dusts, Combustion and Flame, vol.77, issue.1, pp.41-50, 1989.
DOI : 10.1016/0010-2180(89)90103-X

Y. Liu, J. Sun, and D. Chen, Flame propagation in hybrid mixture of coal dust and methane, Journal of Loss Prevention in the Process Industries, pp.4-6691, 2007.
DOI : 10.1016/j.jlp.2007.04.029

D. L. Chen, J. H. Sun, Q. S. Wang, and Y. Liu, Combustion Behaviors and Flame Structure of Methane/Coal Dust Hybrid in a Vertical Rectangle Chamber, Combustion Science and Technology, vol.27, issue.8, pp.1518-15284, 1988.
DOI : 10.1016/S0010-2180(03)00137-8

R. Siwek, 20l laboratory apparatus for the determination of the explosion characteristics of flammable dust IFA - hazardous substances : GESTIS-DUST-EX, 1977.

O. C. Bridgeman and E. W. Aldrich, Vapor Pressure Tables for Water, Journal of Heat Transfer, vol.86, issue.2, pp.279-286, 1964.
DOI : 10.1115/1.3687121

C. B. Kretschmer and R. Wiebe, Liquid-Vapor Equilibrium of Ethanol--Toluene Solutions, Journal of the American Chemical Society, vol.71, issue.5, pp.1793-1797, 1949.
DOI : 10.1021/ja01173a076

D. Ambrose, C. H. Sprake, and R. Townsend, Thermodynamic properties of organic oxygen compounds XXXIII. The vapour pressure of acetone, The Journal of Chemical Thermodynamics, vol.6, issue.7, pp.693-700, 1974.
DOI : 10.1016/0021-9614(74)90119-0

C. E. Baukal, R. E. Schwartz, and J. Z. Company, The John Zink Combustion Handbook, 2001.
DOI : 10.1201/9781420038699

N. Jaeger, Safety strategy against potential hazards due to the handling of powders in a blending unit, Journal of Loss Prevention in the Process Industries, pp.139-151, 2001.
DOI : 10.1016/S0950-4230(00)00036-X

O. Dufaud, Application des principes de la sécurité intrinsèque aux explosions de poussières : de la modération en toutes choses. HDR, Génie des procédés et des produits, 2011.

C. Norme-internationale, Matériels électriques destinés à être utilisés en présence de poussières combustibles -partie 2 : méthodes d'essai -section 3 : méthodes de détermination de l'énergie minimale d'inflammation des mélanges air/poussières, pp.1241-1243, 1994.

C. Cesana and R. Siwek, Mike 3-minimum ignition energy, 2001.

T. Kotoyori, Critical temperatures for the thermal explosion of chemicals, 2005.

A. Norme-américaine and . E1515, Standard Test Method for Explosible Concentration of Combustible Dust

R. Siwek, Reliable determination of safety characteristics in 20 litre apparatus, Proceedings of the Conference on Flammable Dust Explosions, 1988.

A. and G. Agreda, Study of hybrid mixture explosions, 2011.

C. Cesana and R. Siwek, Operating instructions 20l apparatus, Adolf Kuhner, 2001.

R. Pilão, E. Ramalho, and C. Pinho, Overall characterization of cork dust explosion, Journal of Hazardous Materials, vol.133, issue.1-3, pp.1-3183, 2006.
DOI : 10.1016/j.jhazmat.2005.10.015

C. Proust, Flame propagation and combustion in some dust-air mixtures, Journal of Loss Prevention in the Process Industries, vol.19, issue.1, pp.89-100, 2006.
DOI : 10.1016/j.jlp.2005.06.026

URL : https://hal.archives-ouvertes.fr/ineris-00962989

A. E. Dahoe, K. Hanjalic, and B. Scarlett, Determination of the laminar burning velocity and the Markstein length of powder???air flames, Powder Technology, vol.122, issue.2-3, pp.222-238, 2002.
DOI : 10.1016/S0032-5910(01)00419-3

Y. K. Pu, F. Jia, S. F. Wang, and T. Skjold, Determination of the maximum effective burning velocity of dust???air mixtures in constant volume combustion, Journal of Loss Prevention in the Process Industries, vol.20, issue.4-6, pp.4-6462, 2007.
DOI : 10.1016/j.jlp.2007.04.036

T. Skjold, Selected aspects of turbulence and combustion in 20 litre explosion vessels, 2003.

C. Murillo, Risk emerging from uncertainty in experimental characterization of combustible solids. rapport interne, 2011.

S. Gordon and B. J. Mcbride, Computer program for calculation of complex chemical equilibrium compositions and applications, NASA RP 1311, 1994.

L. Landau, On the Theory of Slow Combustion, Acta Physicochimica URSS, vol.19, pp.77-85, 1944.
DOI : 10.1016/B978-0-08-092523-3.50044-7

G. Markstein, North Atlantic Treaty Organization Advisory Group for Aeronautical Research, and Development. Nonsteady flame propagation. Published for and on behalf of Advisory Group for Aeronautical Research and Development, 1964.

B. Karlovitz, D. W. Denniston, and F. E. Wells, Investigation of Turbulent Flames, The Journal of Chemical Physics, vol.20, issue.1, pp.541-547, 1951.
DOI : 10.1063/1.1748289

C. K. Law, Combustion physics, 2006.
DOI : 10.1017/CBO9780511754517

O. Degardin, Effets des Hétérogénéités de Richesse sur la Structure Locale des Flammes Turbulentes, 2006.

D. Bradley, P. H. Gaskell, and X. J. Gu, Burning velocities, markstein lengths, and flame quenching for spherical methane-air flames: A computational study, Combustion and Flame, vol.104, issue.1-2, pp.176-198, 1996.
DOI : 10.1016/0010-2180(95)00115-8

D. Bradley, R. A. Hicks, M. Lawes, C. G. Sheppard, and R. Woolley, The Measurement of Laminar Burning Velocities and Markstein Numbers for Iso-octane???Air and Iso-octane???n-Heptane???Air Mixtures at Elevated Temperatures and Pressures in an Explosion Bomb, Combustion and Flame, vol.115, issue.1-2, pp.126-144, 1998.
DOI : 10.1016/S0010-2180(97)00349-0

P. Clavin, Dynamic behavior of premixed flame fronts in laminar and turbulent flows, Progress in Energy and Combustion Science, vol.11, issue.1, pp.1-59, 1985.
DOI : 10.1016/0360-1285(85)90012-7

Z. Chen, M. P. Burke, and Y. Ju, Effects of compression and stretch on the determination of laminar flame speeds using propagating spherical flames. Combustion Theory and Modelling, pp.343-364, 2009.

O. S. Han, M. Yashima, T. Matsuda, H. Matsui, A. Miyake et al., A study of flame propagation mechanisms in lycopodium dust clouds based on dust particles' behavior, Journal of Loss Prevention in the Process Industries, vol.14, issue.3, pp.153-160, 2001.
DOI : 10.1016/S0950-4230(00)00049-8

F. Cammarota, A. Di-benedetto, V. Di-sarli, E. Salzano, and G. Russo, Combined effects of initial pressure and turbulence on explosions of hydrogen-enriched methane/air mixtures, Journal of Loss Prevention in the Process Industries, pp.607-613, 2009.
DOI : 10.1016/j.jlp.2009.05.001

R. G. Abdel-gayed, D. Bradley, M. N. Hamid, and M. Lewis, Lewis number effects on turbulent premixed flames, Proc. 20th Symposium (International) on Combustion, pp.505-512, 1984.

D. Pavé, Contribution à l'étude de la structure des flammes turbulentes de prémélanges pauvres de méthane-air, 2002.

P. R. Amyotte, K. J. Mintz, M. J. Pegg, Y. H. Sun, and K. I. Wilkie, Laboratory investigation of the dust explosibility characteristics of three Nova Scotia coals, Journal of Loss Prevention in the Process Industries, pp.102-109, 1991.
DOI : 10.1016/0950-4230(91)80014-L

M. G. Zabetakis, Flammability characteristics of combustible gases and vapours, US Bureau of Mines, Bulletin, vol.627, 1965.

G. Pellmont, Minimum ignition energy of combustible dusts and explosion behaviour of hybrid mixtures, 3rd International Symposium on Loss Prevention and Safety Promotion in the Process Industries, pp.851-862, 1980.

L. G. Britton, Short communication: Estimating the minimum ignition energy of hybrid mixtures, Process Safety Progress, pp.124-126, 1998.
DOI : 10.1002/prs.680170208

M. Glor, Ignition hazard due to static electricity in particulate processes, Powder Technology, vol.135, issue.136, pp.135-136223, 2003.
DOI : 10.1016/j.powtec.2003.08.017

J. Bouillard, A. Vignes, O. Dufaud, L. Perrin, and D. Thomas, Ignition and explosion risks of nanopowders, Journal of Hazardous Materials, vol.181, issue.1-3, pp.873-880, 2010.
DOI : 10.1016/j.jhazmat.2010.05.094

URL : https://hal.archives-ouvertes.fr/hal-00517668

A. D. Benedetto, P. Russo, P. Amyotte, and N. Marchand, Modelling the effect of particle size on dust explosions, Chemical Engineering Science, vol.65, issue.2, pp.772-779, 2010.
DOI : 10.1016/j.ces.2009.09.029

D. R. Ballal and A. H. Lefebvre, Ignition and flame quenching of flowing heterogeneous fuel-air mixtures, Combustion and Flame, vol.35, pp.155-168, 1979.
DOI : 10.1016/0010-2180(79)90019-1

F. Williams, Combustion Theory, SEcond Edition, Chemical Engineering Science, vol.42, issue.9, 1994.
DOI : 10.1016/0009-2509(87)85045-5

A. , D. Benedetto, and P. Russo, Thermo-kinetic modelling of dust explosions, Journal of Loss Prevention in the Process Industries, pp.303-309, 2007.

C. and D. Blasi, Modeling chemical and physical processes of wood and biomass pyrolysis, Progress Energy Combustion Science, vol.34, issue.1, pp.47-90, 2008.

C. Proust, D. Bjerketvedt, J. Bakke, and K. Van-wingerden, A few fundamental aspects about ignition and flame propagation in dust clouds Gas explosion handbook, Journal of Loss Prevention in the Process Industries, pp.104-1201, 1997.

S. Kondo, A. Takahashi, and K. Tokuhashi, Calculation of minimum ignition energy of premixed gases, Journal of Hazardous Materials, vol.103, issue.1-2, pp.11-23, 2003.
DOI : 10.1016/S0304-3894(03)00226-7

S. Mannan and F. P. Lees, Lee's loss prevention in the process industries : hazard identification, assessment, and control, 2005.

I. Khalili, O. Dufaud, M. Poupeau, N. Cuervo-rodriguez, and L. Perrin, Ignition sensitivity of gas???vapor/dust hybrid mixtures, Powder Technology, vol.217, issue.0, pp.199-206, 2012.
DOI : 10.1016/j.powtec.2011.10.027

URL : https://hal.archives-ouvertes.fr/hal-00777099

R. W. Prugh, The relationship between flash point and LFL with application to hybrid mixtures, Process Safety Progress, vol.128, issue.2, pp.156-163, 2008.
DOI : 10.1016/j.jhazmat.2005.06.043

J. P. Van-lipzig, E. J. Nilsson, L. P. De-goey, and A. A. Konnov, Laminar burning velocities of n-heptane, iso-octane, ethanol and their binary and tertiary mixtures, Fuel, vol.90, issue.8, pp.902773-2781, 2011.
DOI : 10.1016/j.fuel.2011.04.029

A. D. Benedetto, A. Garcia-agreda, O. Dufaud, I. Khalili, R. Sanchirico et al., Flame propagation of dust and gas-air mixtures in a tube, Proceedings of the 7th Mediterranean Combustion Symposium, 2011.

H. Hanai, H. Kobayashi, and T. Niioka, A numerical study of pulsating flame propagation in mixtures of gas and particles, Proceedings of the Combustion Institute, pp.815-822, 2000.
DOI : 10.1016/S0082-0784(00)80285-4

H. Hironao, M. Kaoru, K. Hideaki, and N. Takashi, Pulsating flame propagation of pmma particle cloud in microgravity, Symposium (International) on Combustion, pp.2675-2681, 1998.

I. Khalili, O. Dufaud, L. Perrin, H. François, and F. Putier, Hybrid mixtures explosion : Case study of oil cakes and hexane mixtures in bio-fuels industries, 13th International Symposium on Loss Prevention in the Process Industries, 2010.

X. J. Gu, M. Z. Haq, M. Lawes, and R. Woolley, Laminar burning velocity and Markstein lengths of methane???air mixtures, Combustion and Flame, vol.121, issue.1-2, pp.41-58, 2000.
DOI : 10.1016/S0010-2180(99)00142-X

G. Yu, C. K. Law, and C. K. Wu, Laminar flame speeds of hydrocarbon + air mixtures with hydrogen addition, Combustion and Flame, vol.63, issue.3, pp.339-347, 1986.
DOI : 10.1016/0010-2180(86)90003-9

I. Yamaoka and H. Tsuji, Determination of burning velocity using counterflow flames, Symposium (International) on Combustion, pp.1883-1892, 1985.
DOI : 10.1016/S0082-0784(85)80687-1

S. F. Wang, H. Zhang, J. Jarosinski, A. Gorczakowski, and J. Podfilipski, Laminar burning velocities and Markstein lengths of premixed methane/air flames near the lean flammability limit in microgravity, Combustion and Flame, vol.157, issue.4, pp.667-675, 2010.
DOI : 10.1016/j.combustflame.2010.01.006

A. E. Dahoe, K. Hanjalic, and B. Scarlett, Determination of the laminar burning velocity and the Markstein length of powder???air flames, Powder Technology, vol.122, issue.2-3, pp.222-238, 2002.
DOI : 10.1016/S0032-5910(01)00419-3

H. Takashi and T. Kimitoshi, Laminar flame speeds of ethanol, n-heptane, isooctane air mixtures paper f2006sc40. Paper F2006SC40, International Federation of Automotive Engineering Societies, 2006.

A. Clarke, Calculation and Consideration of the Lewis Number for Explosion Studies, Process Safety and Environmental Protection, vol.80, issue.3, pp.135-140, 2002.
DOI : 10.1205/095758202317576238

S. Wang, Y. Pu, F. Jia, and A. Gutkowski, Effect of turbulence on flame propagation in cornstarch dust-air mixtures, Journal of Thermal Science, vol.14, issue.4, pp.186-192, 2006.
DOI : 10.1007/s11630-006-0186-4

H. M. Heravi, A. Azarinfar, S. I. Kwon, P. J. Bowen, and N. Syred, Determination of laminar flame thickness and burning velocity of methane-air mixture, 2007.

O. Han, M. Yashima, T. Matsuda, H. Matsui, A. Miyake et al., Behavior of flames propagating through lycopodium dust clouds in a vertical duct, Journal of Loss Prevention in the Process Industries, pp.449-457, 2000.
DOI : 10.1016/S0950-4230(99)00072-8

S. Wang, Y. Pu, F. Jia, A. Gutkowski, and J. Jarosinski, AN EXPERIMENTAL STUDY ON FLAME PROPAGATION IN CORNSTARCH DUST CLOUDS, Combustion Science and Technology, vol.132, issue.10-11, pp.10-111957, 2006.
DOI : 10.1080/00102208808924007

O. L. Gülder, Turbulent premixed flame propagation models for different combustion regimes, 23nd Symposium (International) on Combustion, pp.743-750, 1990.
DOI : 10.1016/S0082-0784(06)80325-5

R. Borghi and M. Champion, Modélisation et théorie des flammes, 2000.

A. E. Dahoe, R. S. Cant, and B. Scarlett, On the decay of turbulence in the 20-liter explosion sphere. Flow, Turbulence and Combustion, pp.159-184, 2002.

J. Sun, R. Dobashi, and T. Hirano, Concentration profile of particles across a flame propagating through an iron particle cloud, Combustion and Flame, vol.134, issue.4, pp.381-387, 2003.
DOI : 10.1016/S0010-2180(03)00137-8

D. Bradley, Z. Chen, S. El-sherif, S. E. Habik, G. John et al., Structure of laminar premixed carbon-methane-air flames and ultrafine coal combustion On the mechanism of the rapid pyrolysis of cellulose, Combustion and Flame Journal of Analytical and Applied Pyrolysis, vol.96, issue.9, pp.80-96121, 1986.

O. Bozier, Contribution à l'étude des caracteristiques de combustion isochore d'une suspension de particules solides reactives, 2004.

F. Patisson, Coal pyrolysis in a rotary kiln: Part I. Model of the pyrolysis of a single grain, Metallurgical and Materials Transactions B : Process Metallurgy and Materials Processing Science, pp.31381-390, 2000.
DOI : 10.1007/s11663-000-0056-5

URL : https://hal.archives-ouvertes.fr/hal-01411200

J. Mazurkiewicz, J. Jarosinski, and P. Wolanski, Investigations of burning properties of cornstarch dust?air flame, Archivum Combustionis, vol.13, pp.3-4189, 1993.

G. Varhegyi, E. Jakab, and M. J. Antal, Is the broido-shafizadeh model for cellulose pyrolysis true ? Energy and Fuels, pp.1345-1352, 1994.

P. Rousset, I. Turner, A. Donnot, and P. Perré, Choix d???un mod??le de pyrolyse m??nag??e du bois ?? l?????chelle de la microparticule en vue de la mod??lisation macroscopique, Annals of Forest Science, vol.9, issue.41, pp.213-229, 2006.
DOI : 10.1051/forest:2005113

X. Déglise, Les conversions thermochimiques du bois. Revue Forestière Française, pp.249-270, 1982.

O. Dufaud, M. Traoré, L. Perrin, S. Chazelet, and D. Thomas, Experimental investigation and modelling of aluminum dusts explosions in the 20??L sphere, Journal of Loss Prevention in the Process Industries, pp.226-236, 2009.
DOI : 10.1016/j.jlp.2009.07.019

URL : https://hal.archives-ouvertes.fr/hal-00508588

J. Villermaux, Génie de la réaction chimique -conception et fonctionnement des réacteurs (2e édition) Tec Doc Lavoisier, 1993.

J. Padet, Conversion thermique et massique -nombre de nusselt : partie 1, 2005.

M. Bidabadi, An Experimental and Analytical Study of Laminar Dust Plame Propagation, 1995.

I. M. Bews, A. N. Hayhurst, S. M. Richardson, and S. G. Taylor, The order, Arrhenius parameters, and mechanism of the reaction between gaseous oxygen and solid carbon, Combustion and Flame, vol.124, issue.1-2, pp.231-245, 2001.
DOI : 10.1016/S0010-2180(00)00199-1

C. and D. Blasi, Linear pyrolysis of cellulosic and plastic waste, Journal of Analytical and Applied Pyrolysis, vol.40, issue.41, pp.40-41463, 1997.
DOI : 10.1016/S0165-2370(97)00020-X

S. L. Madorsky, Thermal degradation of organic polymers, 1964.

G. Antonini and M. Hazi, Pyrolyse -gazéification de déchets solides, état de l'art des procédés existants, faisabilité de traitement d'un déchet par pyrolyse ou gazéification, Etude ADEME/PROCEDIS, 2004.

R. Freeman, Using layer of protection analysis to define safety integrity level requirements, Process Safety Progress, vol.20, issue.3, pp.185-194, 2007.
DOI : 10.1002/prs.10203

S. Fredsted and A. B. Jensen, Spray drying by rotary atomization of lithium-ion battery materials. Chemical Machinery Magazine, 2010.

N. En, Systèmes de protection par évent contre les explosions de poussières, 2011.