]. R. Goldstein, V. Gorodtsov, D. E. Lisovenko-]-a, F. Love, J. A. Scarpa et al., About negativity of the poisson's ratio for anisotropic materials A treatise on the mathematical theory of elasticity [3] R. S. Lakes. Foam structures with a negative Poisson's ratio Dynamic behavior and damping capacity of auxetic foam pads, Proceedings-spie the international society for optical engineering Scarpa, P. Pastorino, A. Garelli, S. Patsias, and M. Ruzzene. Auxetic compliant flexible pu foams: static and dynamic properties. physica status solidi (b), pp.546-5481038, 1944.

M. Bianchi, F. Scarpa, C. Smith, N. Gaspar, C. W. Smith et al., Stiffness and energy dissipation in polyurethane auxetic foams Auxetic behaviour and anisotropic heterogeneity Molecular network design, Gibiansky and R. Lakes. Bounds on the complex bulk and shear moduli of a two-dimensional two-phase viscoelastic composite, pp.5851-5860875, 1007.

F. Scarpa, C. Remillat, P. F. Landi, and G. Tomlinson, Damping modelization of auxetic foams, Proc. SPIE, pp.10-1117, 2000.

A. Bezazi and F. Scarpa, Mechanical behaviour of conventional and negative Poisson???s ratio thermoplastic polyurethane foams under compressive cyclic loading, International Journal of Fatigue, vol.29, issue.5, pp.922-930, 2007.
DOI : 10.1016/j.ijfatigue.2006.07.015

V. Y. Topolov and C. R. Bowen, Characteristics of 1???3-type ferroelectric ceramic/auxetic polymer composites, Modelling and Simulation in Materials Science and Engineering, vol.16, issue.1, 2008.
DOI : 10.1088/0965-0393/16/1/015007

P. Lipinski, E. H. Barhdadi, and M. Cherkaoui, Micromechanical modelling of an arbitrary ellipsoidal multi-coated inclusion, Philosophical Magazine, vol.31, issue.10, pp.1305-1326, 2006.
DOI : 10.1016/S0065-2156(08)70332-6

L. Stagni, Effective transverse elastic moduli of a composite reinforced with multilayered hollow-cored fibers, Composites Science and Technology, vol.61, issue.12, pp.611729-1734, 2001.
DOI : 10.1016/S0266-3538(01)00071-9

K. E. Evans and A. Alderson, Auxetic Materials: Functional Materials and Structures from Lateral Thinking!, Advanced Materials, vol.12, issue.9, pp.617-628, 2000.
DOI : 10.1002/(SICI)1521-4095(200005)12:9<617::AID-ADMA617>3.0.CO;2-3

D. J. Gunton and G. A. Saunders, The Young's modulus and Poisson's ratio of arsenic, antimony and bismuth, Journal of Materials Science, vol.4, issue.9, pp.1061-1068, 1007.
DOI : 10.1007/BF00550070

Y. Li and D. Y. Chung, The anisotropic behavior of Poisson's ratio, Young's modulus, and shear modulus in crystals with different symmetries, Physica Status Solidi (a), vol.28, issue.2, pp.603-610, 1978.
DOI : 10.1098/rspa.1975.0052

A. Yeganeh-haeri, D. J. Weidner, and J. B. Parise, Elasticity of agr-Cristobalite: A Silicon Dioxide with a Negative Poisson's Ratio, Science, vol.257, issue.5070, pp.650-652, 1992.
DOI : 10.1126/science.257.5070.650

C. Lees, J. Vincent, and . Hillerton, Poisson's ratio in skin, Biomed Mater Eng, vol.1, issue.1, pp.19-23, 1991.

D. R. Veronda and R. A. Westmann, Mechanical characterization of skin???Finite deformations, Journal of Biomechanics, vol.3, issue.1, pp.111-124, 1970.
DOI : 10.1016/0021-9290(70)90055-2

J. L. Williams and J. L. Lewis, Properties and an Anisotropic Model of Cancellous Bone From the Proximal Tibial Epiphysis, Journal of Biomechanical Engineering, vol.104, issue.1, pp.50-56, 1982.
DOI : 10.1115/1.3138303

L. J. Gibson and M. F. Ashby, The Mechanics of Three-Dimensional Cellular Materials, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.382, issue.1782
DOI : 10.1098/rspa.1982.0088

L. J. Gibson and M. F. Ashby, Cellular Solids: Structure and Prop, 1988.

K. E. Perrie and . Evans, An auxetic filter: A tuneable filter displaying enhanced size selectivity or defouling properties, Industrial & Engineering Chemistry Research, vol.39, issue.3, pp.654-665, 2000.

U. D. Larsen, O. Sigmund, and S. Bouwstra, Design and fabrication of compliant micromechanisms and structures with negative poisson's ratio, Journal of microelectromechanical systems, vol.6, pp.2-99, 1997.

R. J. Jackman, S. T. Brittain, A. Adams, M. G. Prentiss, and G. M. Whitesides, Design and Fabrication of Topologically Complex, Three-Dimensional Microstructures, Science, vol.280, issue.5372, pp.2802089-91, 1998.
DOI : 10.1126/science.280.5372.2089

E. A. Friis, R. S. Lakes, and J. B. Park, Negative Poisson's ratio polymeric and metallic foams, Journal of Materials Science, vol.15, issue.12, pp.4406-4414, 1007.
DOI : 10.1007/BF00551939

J. Choi and R. Lakes, Non-linear properties of metallic cellular materials with a negative Poisson's ratio, Journal of Materials Science, vol.20, issue.19, pp.5375-5381, 1992.
DOI : 10.5254/1.3539591

B. D. Caddock and K. E. Evans, Microporous materials with negative poisson's ratios

K. Evans and B. Caddock, Microporous materials with negative poisson's ratios. ii. mechanisms and interpretation, Journal of Physics D: Applied Physics, vol.22, issue.12, p.1883, 1989.
DOI : 10.1088/0022-3727/22/12/013

W. Gaoyuan, Design of auxetic polymer self-assemblies, physica status solidi, vol.242, issue.3, pp.742-748, 2005.

R. Lakes, Deformation mechanisms in negative Poisson's ratio materials: structural aspects, Journal of Materials Science, vol.247, issue.9, pp.2287-2292, 1007.
DOI : 10.1098/rspa.1982.0087

D. Prall and R. S. Lakes, Properties of a chiral honeycomb with a poisson's ratio of ??? 1, International Journal of Mechanical Sciences, vol.39, issue.3
DOI : 10.1016/S0020-7403(96)00025-2

A. Alderson, K. L. Alderson, D. Attard, K. E. Evans, R. Gatt et al., Elastic constants of 3-, 4- and 6-connected chiral and anti-chiral honeycombs subject to uniaxial in-plane loading, Composites Science and Technology, vol.70, issue.7, pp.701042-1048, 2010.
DOI : 10.1016/j.compscitech.2009.07.009

J. Dirrenberger, S. Forest, D. Jeulin, and C. Colin, Homogenization of periodic auxetic materials, Procedia Engineering, vol.10, issue.0, pp.1847-1852, 2011.
DOI : 10.1016/j.proeng.2011.04.307

URL : https://hal.archives-ouvertes.fr/hal-00607077

E. Sanchez-palencia, Non-homogeneous media and vibration theory, Lecture Notes in Physics, vol.127, 1980.

N. Bakhvalov and G. Panasenko, Averaging processes in period media. mathematic problem in mechanics of composite materials, 1989.

W. E. Warren and E. Byskov, Three-fold symmetry restrictions on two-dimensional micropolar materials, European Journal of Mechanics - A/Solids, vol.21, issue.5, pp.779-792, 2002.
DOI : 10.1016/S0997-7538(02)01236-6

F. , D. Reis, and J. F. Ganghoffer, Equivalent mechanical properties of auxetic lattices from discrete homogenization, Computational Materials Science, vol.51, issue.1, pp.314-321, 2012.

F. , D. Reis, and J. Ganghoffer, Discrete homogenization of architectured materials: Implementation of the method in a simulation tool for the systematic prediction of their effective elastic properties, pp.85-109, 2010.

M. Assidi, F. D. Reis, and J. Ganghoffer, Equivalent mechanical properties of biological membranes from lattice homogenization, Journal of the Mechanical Behavior of Biomedical Materials, vol.4, issue.8, 2011.
DOI : 10.1016/j.jmbbm.2011.05.040

M. Assidi and J. Ganghoffer, Composites with auxetic inclusions showing both an auxetic behavior and enhancement of their mechanical properties, Composite Structures, vol.94, issue.8, p.2012
DOI : 10.1016/j.compstruct.2012.02.026

G. Wei and S. F. Edwards, Auxeticity windows for composites. Physica A: Statistical Mechanics and its Applications, pp.5-10, 1998.

S. Torquato, Effective stiffness tensor of composite media???I. Exact series expansions, Journal of the Mechanics and Physics of Solids, vol.45, issue.9
DOI : 10.1016/S0022-5096(97)00019-7

G. Wei and S. F. Edwards, Effective elastic properties of composites of ellipsoids (i)

G. Wei and S. F. Edwards, Effective elastic properties of composites of ellipsoids (ii)

A. W. Lipsett and A. I. Beltzer, Reexamination of dynamic problems of elasticity for negative Poisson???s ratio, The Journal of the Acoustical Society of America, vol.84, issue.6, 1988.
DOI : 10.1121/1.397064

F. Yang, Size-dependent effective modulus of elastic composite materials: Spherical nanocavities at dilute concentrations, Journal of Applied Physics, vol.92, issue.7, p.3516, 2004.
DOI : 10.1063/1.1697691

A. Bezazi and F. Scarpa, Tensile fatigue of conventional and negative Poisson???s ratio open cell PU foams, International Journal of Fatigue, vol.31, issue.3, pp.488-494, 2009.
DOI : 10.1016/j.ijfatigue.2008.05.005

B. J. Choi and S. R. Lakes, Design of a fastener based on negative poisson's ratio foam, 1991.

G. E. Stavroulakis, Auxetic behaviour: appearance and engineering applications, physica status solidi (b), vol.34, issue.3, pp.710-720, 2005.
DOI : 10.1177/002199839502900106

N. Gaspar, X. J. Ren, C. W. Smith, J. N. Grima, and K. E. Evans, Novel honeycombs with auxetic behaviour, Acta Materialia, vol.53, issue.8, pp.532439-2445, 2005.
DOI : 10.1016/j.actamat.2005.02.006

O. Fassi-fehri, Le problème de la paire d'inclusions plastiques et hétérogènes dans une matrice anisotrope : Application à l'étude du comportement des matériaux composites et de la plasticité, 1985.

J. D. Eshelby, The Determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.241, issue.1226, pp.376-396, 1226.
DOI : 10.1098/rspa.1957.0133

Y. Koutsawa, M. Cherkaoui, and E. M. Daya, Multicoating Inhomogeneities Problem for Effective Viscoelastic Properties of Particulate Composite Materials, Journal of Engineering Materials and Technology, vol.51, issue.2, pp.21012-21013, 2009.
DOI : 10.1103/PhysRevE.72.031801

P. H. Dederichs and R. Zeller, Variational treatment of the elastic constants of disordered materials. Zeitschrift für Physik A Hadrons and Nuclei, pp.103-116, 1973.

R. Zeller and P. H. Dederichs, Elastic Constants of Polycrystals, Physica Status Solidi (b), vol.241, issue.2, pp.831-842, 1973.
DOI : 10.1098/rspa.1957.0133

O. Fassi-fehri, A. Hihi, and M. Berveiller, Multiple site self consistent scheme, International Journal of Engineering Science, vol.27, issue.5
DOI : 10.1016/0020-7225(89)90002-5

P. Zattarin, Etude de l'intégration d'un modèle polycristallin dans un code d'éléments finis en élastoplasticité, 2000.

R. M. Christensen and K. H. Lo, Solutions for effective shear properties in three phase sphere and cylinder models, Journal of the Mechanics and Physics of Solids, vol.27, issue.4, pp.315-330, 1979.
DOI : 10.1016/0022-5096(79)90032-2

E. Hervé and A. Zaoui, n-layered inclusion-based micromechanical modelling

E. Hervé and A. Zaoui, Elastic behaviour of multiply coated fibre-reinforced composites, International Journal of Engineering Science, vol.33, issue.10, pp.1419-1433, 1995.
DOI : 10.1016/0020-7225(95)00008-L

. El-hassane and . Barhdadi, Modélisation micrmécanique des matériaux composites à renforts ellipsoidaux multienrobés et applications, 2005.

Y. Koutsawa, F. Biscani, S. Belouettar, H. Nasser, and E. Carrera, Multi-coating inhomogeneities approach for the effective thermo-electro-elastic properties of piezoelectric composite materials, Composite Structures, vol.92, issue.4, pp.964-972, 2010.
DOI : 10.1016/j.compstruct.2009.09.041

L. J. Walpole, Elastic Behavior of Composite Materials: Theoretical Foundations, of Advances in Applied Mechanics, pp.169-242, 1981.
DOI : 10.1016/S0065-2156(08)70332-6

M. Cherkaoui, H. Sabar, and M. Berveiller, Micromechanical Approach of the Coated Inclusion Problem and Applications to Composite Materials, Journal of Engineering Materials and Technology, vol.116, issue.3, pp.274-278, 1994.
DOI : 10.1115/1.2904286

K. E. Evans, Auxetic polymers, Membrane Technology, vol.2001, issue.137, pp.9-9, 2001.
DOI : 10.1016/S0958-2118(01)80300-1

E. Hervé and A. Zaoui, Modelling the effective behavior of nonlinear matrix-inclusion composites, European Journal of Mechanics -A/Solids, vol.9, issue.6, pp.505-515, 1990.

S. Nemat-nasser and M. Hori, Micromechanics: Overall Properties of Heterogeneous Materials, Journal of Applied Mechanics, vol.63, issue.2, 1993.
DOI : 10.1115/1.2788912

P. Vieville, A. S. Bonnet, and P. Lipinski, Modelling effective properties of composite materials using the inclusion concept. general considerations, Arch. Mech, vol.58, issue.3, pp.207-239, 2006.

L. Stagni, Elastic analysis of a multilayered cylindrical fiber with eigenstrains, International Journal of Engineering Science, vol.39, issue.6, pp.641-653, 2001.
DOI : 10.1016/S0020-7225(00)00044-6

Y. C. Wang, M. Ludwigson, and R. S. Lakes, Deformation of extreme viscoelastic metals and composites, 13th International Conference on Internal Friction and Ultrasonic Attenuation in Solids, pp.41-49, 2004.
DOI : 10.1016/j.msea.2003.08.071

Y. Koutsawa, M. Cherkaoui, and E. M. Daya, Multicoating Inhomogeneities Problem for Effective Viscoelastic Properties of Particulate Composite Materials, Journal of Engineering Materials and Technology, vol.51, issue.2, pp.21012-21013, 2009.
DOI : 10.1103/PhysRevE.72.031801

M. R. Haberman, Design of high loss viscoelastic composites through micromechanical modeling and decision based materials design, 2007.

E. Kröner, Effective moduli of random elastic media-unified calculation of bounds and self-consistent values, Mechanics Research Communications, vol.4, issue.6, pp.389-393, 1977.
DOI : 10.1016/0093-6413(77)90061-1

E. Kröner, Bounds for effective elastic moduli of disordered materials, Journal of the Mechanics and Physics of Solids, vol.25, issue.2, pp.137-155, 1977.
DOI : 10.1016/0022-5096(77)90009-6

J. Jarzynski, A review of the mechanisms of sound attenuation in materials. Sound and Vibration Damping With Polymers, pp.116-207, 1990.

Y. Koutsawa, Modélisation et conception multi-échelles des matériaux : de la description atomique discrète aux modèles du continu. Application aux propriétés amortissantes des pare-brises, 2008.

R. S. Lakes, Extreme damping in compliant composites with a negative-stiffness ph, Philosophical Magazine Letters, vol.8, issue.2, pp.95-100, 2001.

R. M. Christensen, Mechanics of Composite Materials, Journal of Applied Mechanics, vol.47, issue.2, 1979.
DOI : 10.1115/1.3153710

R. M. Christensen, Viscoelastic properties of heterogeneous media, Journal of the Mechanics and Physics of Solids, vol.17, issue.1, pp.23-41, 1969.
DOI : 10.1016/0022-5096(69)90011-8

Z. Hashin, Complex moduli of viscoelastic composites???I. General theory and application to particulate composites, International Journal of Solids and Structures, vol.6, issue.5, pp.539-552, 1970.
DOI : 10.1016/0020-7683(70)90029-6

F. Dinzart and P. Lipinski, Self-consistent approach of the constitutive law of a twophase viscoelastic material described by fractional derivative models, Arch. Mech, vol.62, issue.2, pp.135-156, 2010.

P. Vieville, Influence des paramètres architecturaux sur les caractéristiques viscoelastiques du bois à ses différentes échelles d'hétérogéneités, 1992.

P. Vieville and P. Lipinski, Application du schema autocohérent par étapes à la modélisation des propriétés viscoelastiques des composites, J.N.C, vol.9, pp.545-554, 1994.

C. Friebel, I. Doghri, and V. Legat, General mean-field homogenization schemes for viscoelastic composites containing multiple phases of coated inclusions, International Journal of Solids and Structures, vol.43, issue.9, pp.2513-2541, 2006.
DOI : 10.1016/j.ijsolstr.2005.06.035

L. C. Brinson and W. S. Lin, Comparison of micromechanics methods for effective properties of multiphase viscoelastic composites, Composite Structures, vol.41, issue.3-4, pp.3-4353, 1998.
DOI : 10.1016/S0263-8223(98)00019-1

A. Broohm, P. Zattarin, and P. Lipinski, Prediction of mechanical behaviour of inhomogeneous and anisotropic materials using an incremental scheme, Arch. Mech, vol.52, issue.no6, pp.949-967, 2000.

K. L. Alderson, A. Alderson, G. Smart, V. R. Simkins, and P. J. Davies, Auxetic polypropylene fibres:Part 1 - Manufacture and characterisation, Plastics, Rubber and Composites, vol.34, issue.8, pp.344-349, 2002.
DOI : 10.1021/ie990572w

K. Alderson and K. Evans, The fabrication of microporous polyethylene having a negative Poisson's ratio, Polymer, vol.33, issue.20, pp.4435-4438, 1992.
DOI : 10.1016/0032-3861(92)90294-7

J. N. Grima, D. Attard, R. N. Cassar, L. Farrugia, L. Trapani et al., On the mechanical properties and auxetic potential of various organic networked polymers, Molecular Simulation, vol.35, issue.10-15, pp.1149-1158, 2008.
DOI : 10.1016/S0263-8223(96)00054-2

URL : https://hal.archives-ouvertes.fr/hal-00515061

H. Boudaoud, E. M. Daya, S. Belouettar, L. Duigou, and M. Potier-ferry, Damping analysis of beams submitted to passive and active control, Engineering Structures, vol.31, issue.2, pp.31322-331, 2009.
DOI : 10.1016/j.engstruct.2008.08.009

URL : https://hal.archives-ouvertes.fr/hal-00402245

D. Ross, E. Ungar, and E. Kerwin, Damping of plate flexural vibrations by means of viscoelastic laminae, pp.48-88, 1959.

M. D. Rao, R. Echempati, and S. Nadella, Dynamic analysis and damping of composite structures embedded with viscoelastic layers, Composites Part B: Engineering, vol.28, issue.5-6, pp.5-6547, 1997.
DOI : 10.1016/S1359-8368(96)00073-X

H. Hu, S. Belouettar, M. Potier-ferry, and . Daya, Review and assessment of various theories for modeling sandwich composites, Composite Structures, vol.84, issue.3, pp.282-292, 2008.
DOI : 10.1016/j.compstruct.2007.08.007

E. Carrera, Theories and finite elements for multilayered, anisotropic, composite plates and shells, Archives of Computational Methods in Engineering, vol.35, issue.6, pp.87-140, 2002.
DOI : 10.2514/3.10099

E. Carrera, Theories and Finite Elements for Multilayered Plates and Shells:A Unified compact formulation with numerical assessment and benchmarking, Archives of Computational Methods in Engineering, vol.46, issue.5???7, pp.215-296, 2003.
DOI : 10.2514/3.10634

C. M. Vasques, R. A. Moreira, and J. Dias-rodrigues, Viscoelastic damping technologies?part i: Modeling and finite element implementation, Journal of Advanced Research in Mechanical Engineering, vol.1, pp.76-95, 2012.

N. , L. Maout, E. Verron, and J. Begue, Simultaneous geometrical and material optimal design of hybrid elastomer/composite sandwich plates, Composite Structures, vol.93, issue.3, pp.1153-1157, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01007306

J. Paul and . Macioce, Design for damping: Performance of laminated metals can be modeled, Metals & Metalforming, vol.23, 2002.

W. L. Azoti, Y. Koutsawa, N. Bonfoh, P. Lipinski, and S. Belouettar, On the capability of micromechanics models to capture the auxetic behavior of fibers/particles reinforced composite materials, modulus and the loss factor are then identified and discussed versus nonauxetic (conventional) composite reinforcements, pp.156-165, 2011.
DOI : 10.1016/j.compstruct.2011.07.006