B. H. Adibi-sedeh, V. Madhavan, E. B. Bahrafa_10-]-s, S. M. Afazov, J. Ratchev et al., Modelling and simulation of micro-milling cutting forces [AFN_97] AFNOR Association Française de NORmalisation Domaine de fonctionnement des outils coupants, Norme Française, NF E 66-520-1 New Developments in the Theory of the Metal Cutting process, Part I. The Ploughing Process in metal Cutting A new approach for the friction identification during machining through the use of finite element modeling Machinability of titanium alloys (Ti6Al4V and Ti555.3) Analysis of a new segmentation intensity ratio''sir''to characterize the chip segmentation process in machining ductile metals, ASM_85] American Society for Metals. Metals Handbook ? Desk EditionAVI_12] A. Shrot et M. Baker. Determination of Johnson cook parameters from machining simulations. Computational Materials ScienceBAH_11] S. Bahi, M. Nouari, A. Moufki, M. El Mansori, et A. Molinari. A new friction law for sticking and sliding contacts in machining. Tribology International, pp.485-4922154, 1960.

]. S. Bah_11_b, M. Bahi, A. Nouari, M. Moufki, E. A. Mansori et al., Modélisation hybride du frottement local à l'interface outil-copeau en usinage des alliages métalliques Thèse de doctorat de l'école nationale supérieure d'arts et métiers de Bordeaux The recovery of design intent in reverse engineering problems Transferts thermiques dans les procédés de mise en forme des matériaux Contact in a multi-material eulerian finite element formulation Influence of oxide nature on the machinability of 316L stainless steels Identification of a friction model?application to the context of dry cutting of an AISI 316L austenitic stainless steel with a TiN coated carbide tool Identification of a friction model for modelling of orthogonal cutting Multilayer coatings for improved performance Application of 2D F.E.M. to chip formation in orthogonal cutting ALE Simulation of Orthogonal Cutting: a New Approach to Model Heat Transfer Phenomena at the Tool-Chip Interface, CHA_05] H. Chandrasekaran, R. M'Saoubi et H. Chazal. Modelling of material flow stress in chip formation process from orthogonal milling and split Hopkinson bar testsCHAN_01] B. Changeux, M. Touratier, J.L. Lebrun, T. Thomas et J. Clisson. High-speed shear tests for the identification of the Johnson?Cook law, Fourth International ESAFORM Conference on LiègeCHE_97] Y.H. Chen et C.T. Ng. Integrated reverse engineering and rapid prototyping. Computers & Industrial Engineering, pp.1265-127539, 1990.

[. Paul-verlaine-de-metz-et-de-l-'université-carlos, I. De-madrid, H. Cui, W. Liao, N. Dai et al., Qualité géométrique de la mesure de surfaces complexes par moyens optiques, Thèse de doctorat de l'école normale supérieure de Cachan A flexible and rapid micro-adjustment algorithm for structured light 3d measurement system with camera projector A study of plastic strain and plastic strain rate in machining of steel AISI 1045 using F.E.M. analysis Improvement of wear resistance of hot work steels by pvd coatings deposition Tribological properties of the PVD and CVD coatings deposited onto the nitride tool ceramics A numerical model to determine temperature distribution in orthogonal metal cutting A Modeling of cutting for viscoplastic materials Progressive tool-wear mechanisms and their effects on chip-curl/chip-form in machining with grooved tools: an extended application of the equivalent toolface model A model for chip formation during machining of hardened steel An improved model for oblique cutting and its application to chip-control research, FAN_05] N. Fang. Tool-chip friction in machining with a large negative rake angle toolFIL_07] L. Filice, F. Micari, S. Rizzuti, et D. Umbrello. A critical analysis on the friction modelling in orthogonal machining. International Journal of Machine Tools and ManufactureFON_09] M. Fontaine, L. Lambert-Campagne et A. Maurel-Pantel. Reconstruction 3D d'outils coupants pour le contrôle géométrique des fraises et la modélisation du fraisage, pp.199-204109, 1954.

A. [. Gardner, K. T. Insausti, M. Ng, ]. W. Ashraf-[-gin_01-]-toman-macginley-et-john-monaghangrz_98, and . Grzesik, Elevated temperature material properties of stainless steel alloys Modelling the orthogonal machining process using coated cemented carbide cutting tools The role of coatings in controlling the cutting process when turning with coated indexable inserts An integrated approach to evaluating the tribo-contact for coated cutting inserts, Grzesik et P. Nieslony. Prediction of friction and heat flow in machining incorporating thermophysical properties of the coating-chip interface, pp.634-647293, 1998.

M. [. Grzesik, P. Bartoszuk, ]. W. Nieslonygrz_08_l, . J. Grzesik-[-gu_99-], G. Gu et al., Finite element modelling of temperature distribution in the cutting zone in turning processes with differently coated tools Advanced Machining Processes of Metallic Materials: Theory, Modelling and Applications Tool life and wear mechanism of uncoated and coated milling inserts Assessment of deformation of a shear localized chip in high speed machining, Journal of Materials Processing Technology Wear Part Journal of Materials Processing Technology, vol.1, issue.129, pp.164-1651204, 1999.

J. Hua, R. [. Shivpuri, . [. Mackerle, C. A. Jawahir, . R. Van-luttervelt-[-jc_85-]-g et al., Prediction of chip morphology and segmentation during the machining of titanium alloys Finite-element analysis and simulation of machining: a bibliography Recent developments in chip control research and applications Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures, Journal of Materials Processing TechnologyJIA_11] D. Jianxin, Z. Jiantou, Z. Hui, et Y. Pei. Wear mechanisms of cemented carbide tools in dry cutting of precipitation hardening semi-austenitic stainless steels, pp.124-13317, 1976.

T. Kagnaya, Contribution à l'identification des mécanismes d'usure d'un WC-6%Co en usinage et par une approche tribologique et thermique, 2009.

[. Kim, J. Sim, H. Kweon, F. Klocke, T. Schroeder et al., Machining and machinability. Encyclopedia of Materials Manipulation of coating and subsurface properties in reconditioning of wc-co carbide cutting tools Finite element modelling of the thermo-mechanical behavior of coatings under extreme contact loading in dry machining Influence of cutting material and coating on tool quality and tool life Determination of optimum cutting parameters during machining of aisi 304 austenitic stainless steel Tool coatings influence on the heat transfer in the tool during machining Applicability of different hard coatings in dry machining an austenitic steel Extension of oxley's predictive machining theory for Johnson and cook flow stress model The effects of work material on tool wear, Journal of Materials Processing TechnologyLAZ_02] I. Lazoglu et Y. Altintas. Prediction of tool and chip temperature in continuous and interrupted machining, pp.647-656, 1998.

G. [. List, E. A. Sutter, . Bouthichemab_08-]-t, F. Mabrouki, M. Girardin et al., Étude des mécanismes d'endommagement des outils carbure WC-Co par la caractérisation de l'interface outil-copeau-Application à l'usinage à sec de l'alliage d'aluminium aéronautique AA2024 T351 Thèse de doctorat de l'école nationale supérieure d'arts et métiers de Bordeaux Cutting temperature prediction in high speed machining by numerical modelling of chip formation and its dependence with crater wear, Rigal. Numerical and experimental study of dry cutting for an aeronautic aluminium alloy (A2024-T351). International Journal of Machine Tools and Manufacture, pp.1-12344, 2001.

J. Mackerle, C. Maranhão, J. P. Davimmau_12, ]. Maurel-pantel, M. Fontaine et al., Finite element modelling of machining of AISI 316 steel: Numerical simulation and experimental validation. Simulation Modelling Practice and Theory Modelling and simulation of high speed machining 3D FEM simulations of shoulder milling operations on a 304L stainless steel. Simulation Modelling Practice and Theory Chip formation friction and high quality machines surface. Surface treatment of metals, Mechanics of the metal cutting process: orthogonal cutting Numerical and analytical modeling of orthogonal cutting: The link between local variables and global contact characteristics Modelling of orthogonal cutting with a temperature dependent friction law Thermoviscoplastic modelling of oblique cutting: forces and chip flow predictions Simulation of the orthogonal metal cutting process using an arbitrary lagrangian eulerian finite-element method, International Journal of Machine Tools and Manufacture Morão Dias. Residual stress analysis in orthogonal machining of standard and resulfurized AISI 316L steelsMSA_04] R. M'Saoubi et H. Chandrasekaran. Investigation of the effects of tool microgeometry and coating on tool temperature during orthogonal turning of quenched and tempered steel. International Journal of Machine Tools and ManufactureNOU_03] M. Nouari, G. List, F. Girot, et D. Coupard. Experimental analysis and optimisation of tool wear in dry machining of aluminium alloys, pp.103-114139, 1941.

M. Nouari, A. Ginting, M. Nouari, M. Calamaz, F. Girot et al., Mécanismes d'usure des outils coupants en usinage à sec d'alliage de titane aéronautique An analysis of fracture and delamination in thin coatings subjected to contact loading An ALE formulation for the solution of two-dimensional metal cutting problems Experimental and numerical modelling of the residual stresses induced in orthogonal cutting of AISI 316L steel [OZE_06] T. Özel. The influence of friction models on finite element simulations of machining 2D and 3D numerical models of metal cutting with damage effects Reverse engineering with a structured light system CVD coatings: from cutting tools to aerospace applications and its future potential, Surface and Coatings Technology Tool wear and machinability of x5 crmnn 18 18 stainless steels. Journal of Materials Processing TechnologyPOS_89] E. Posti et I. Nieminen. Influence of coating thickness on the life of tin-coated high speed steel cutting tools. WearPOU_01] G. Poulachon, A. Moisan et I. S. Jawahir. Tool-wear mechanisms in hard turning with polycrystalline cubic boron nitride toolsPOU_02] G. Poulachon, A. L. Moisan et Michel Dessoly. Contribution à l'étude des mécanismes de coupe en tournage dur. Mécanique Industries Rashkovskiy. Design and performance of AlTiN and TiAlCrN PVD coatings for machining of hard to cut materials. Surface and Coatings Technology Tribological and thermal functions of cutting tool coatings. Surface and Coatings Technology, pp.18-195663, 1989.

P. [. Rech, O. Rosa, P. A. Kolednik, A. G. Martins, . [. Atkins et al., The transient beginning to machining and the transition to steady-state cutting Modélisation du frottement outil pièce pour la simulation de la coupe par la méthode des éléments finis The mechanism of chip formation with hard turning steel. CIRP Annals ? Manufacturing Technology Finite element analysis of the rake angle effects in orthogonal metal cutting Modélisation analytique de l'usinage à grande vitesse et étude de l'usure en cratère ? application au tournage Automated laser scanning system for reverse engineering and inspection Dry machining: Machining of the future, Influence of cutting tool coatings on the tribological phenomena at the toolchip interface in orthogonal dry turning. Surface and Coatings TechnologySHR_12] A. Shrot et M. Baker. Determination of Johnson cook parameters from machining simulations. Computational Materials Science Thèse de doctorat de l'université Paul Verlaine de MetzSTA_64] G. V. Stabler. The chip flow law and its consequences, 5th International Machine Tool Design Research Conference, pp.16-175132, 1964.

A. [. Strenkowski, J. Shih, G. Lin, L. Sutter, A. Faure et al., An analytical finite element model for predicting three-dimensional tool forces and chip flow, SUL_02] D. Sullivan et M. Cotterell. Machinability of austenitic stainless steel ss303. Journal of Materials Processing TechnologySYE_97] R. J. Seethaler et I. Yellowley. An upper-bound cutting model for oblique cutting tools with a nose radius. International Journal of Machine Tools and Manufacture, pp.723-731153, 1997.
DOI : 10.1016/S0890-6955(01)00162-6

N. Tounsi, J. Vincenti, A. Otho, M. A. Elbestawitre_00-]-e, P. K. Trent et al., From the basic mechanics of orthogonal metal cutting toward the identification of the constitutive equation Metal Cutting Chapter 9 ? Machinability. Butterworth- Heinemann Analytical predictions of three dimensional cutting process Part 1: Basic cutting model and energy approach Analytical predictions of three dimensional cutting process Part 2: Chip formation and cutting force with conventional single point tool Three-dimensional temperature predictions in machining processes using finite difference method, Tekiner et S. Yesilyurt. Investigation of the cutting parameters depending on process sound during turning of AISI 304 austenitic stainless steelUHL_07] E. Uhlmann, M. G. von der Schulenburg et R. Zettier. Finite element modeling and cutting simulation of inconel 718. CIRP Annals -Manufacturing TechnologyUMB_07] D. Umbrello, R. M'Saoubi et J. C. Outeiro. The influence of Johnson-cook material constants on finite element simulation of machining of AISI 316L steel. International Journal of Machine Tools and Manufacture, pp.507-5131373, 1978.

D. Umbrello, L. Filice, S. Rizzuti, F. Micari, and L. Settineri, On the effectiveness of Finite Element simulation of orthogonal cutting with particular reference to temperature prediction, Journal of Materials Processing Technology, vol.189, issue.1-3, pp.284-291, 2007.
DOI : 10.1016/j.jmatprotec.2007.01.038

J. Wang, P. J. Mathew, K. Wang, I. Weinert, J. W. Inasaki et al., Development of a general tool model for turning operations based on a variable flow stress theory, XUE_03] Q. Xue, V. F. Nesterenko et M. A. Meyers. Evaluation of the collapsing thick-walled cylinder technique for shear-band spacing, pp.71-90, 1995.
DOI : 10.1016/0890-6955(94)E0004-3

C. Yen, J. Söhner, B. Lilly, T. Altan-yen, A. Jain et al., Estimation of tool wear in orthogonal cutting using the finite element analysis, Proceedings of the Institution of Mechanical Engineers, volume Part C201(C3) Zorev. Interrelationship between shear processes occurring along tool face and on shear plane in metal cutting, International Research in Production EngineeringZOU_09] G. P. Zou, I. Yellowley et R. J. Seethalter. A new approach to the modeling of oblique cutting processes, International Journal of Machine Tools and Manufacture, pp.82-9172, 1963.
DOI : 10.1016/S0924-0136(03)00847-1