J. G. Leidenfrost, S. Nukiyama, C. T. Avedisian, J. Koplik, and S. Chandra, A second paper on the forms assumed by drop of liquids falling vertically on a horizontal plateThe maximum and minimum values of the heat Q transmitted from metal to boiling water under atmospheric pressureLeidenfrost boiling of methanol droplets on hot porous/ceramic surfacesExperiments on adding a surfactant to water drop boiling on a hot surfaceAn experimental study of the Leidenfrost evaporation characteristics of emulsified liquid dropletsThe critical temperature of dry impact for tiny droplet impinging on a heated surface, Proc. R. Soc. London Rioboo, C. Tropea, and M. Marengo, "Outcomes from a drop impact on solid surfaces, pp.1153-1166, 1876.

M. R. Panao and A. L. Moreira, Heat transfer correlation for intermittent spray impingement: A dynamic approach, International Journal of Thermal Sciences, vol.48, issue.10, pp.1853-1862, 2009.
DOI : 10.1016/j.ijthermalsci.2009.02.018

J. E. Eckhause and R. D. Reitz, MODELING HEAT TRANSFER TO IMPINGING FUEL SPRAYS IN DIRECT-INJECTION ENGINES, Atomization and Sprays, vol.5, issue.2, pp.213-242, 1995.
DOI : 10.1615/AtomizSpr.v5.i2.60

C. Arcoumanis and J. C. Chang, Heat transfer between a heated plate and an impinging transient diesel spray, Experiments in Fluids, vol.77, issue.No 1, pp.105-119, 1993.
DOI : 10.1615/AtomizSpr.v2.i1.10

A. L. Moreira and M. R. Panao, Heat transfer at multiple-intermittent impacts of a hollow cone spray, International Journal of Heat and Mass Transfer, vol.49, issue.21-22, pp.4132-4151, 2006.
DOI : 10.1016/j.ijheatmasstransfer.2006.04.004

C. Mundo, M. Sommerfeld, and C. Tropea, Droplet-wall collisions: Experimental studies of the deformation and breakup process, International Journal of Multiphase Flow, vol.21, issue.2, pp.151-173, 1995.
DOI : 10.1016/0301-9322(94)00069-V

C. Mundo, M. Sommerfeld, and C. Tropea, Experimental studies of the deposition and splashing of small liquid droplet impinging on a flat surface, Proc. ICLASS, 1994.

M. Marengo and C. Tropea, Aufprall von Tropfen auf Flüssigkeitsfilme DFG, Zwischenbericht zum Forschungsvorhaben, Tr, 1999.

W. Samenfick, Grundlegende Untersuchung zur Tropfeninteraktion mit Schubspannungsgetriebenen Wandfilmen, 1997.

C. D. Stow and M. G. Hadfield, An Experimental Investigation of Fluid Flow Resulting from the Impact of a Water Drop with an Unyielding Dry Surface, Proc. R. Soc. London, pp.419-441, 1981.
DOI : 10.1098/rspa.1981.0002

J. Dewitte, Modelisation de l'impact d'un brouillard de gouttes en evaporation et sous pression sur une paroi chauffee, Thesis PhD ENSAE, 2006.

G. E. Cossali, M. Marengo, and M. Santini, SINGLE-DROP EMPIRICAL MODELS FOR SPRAY IMPACT ON SOLID WALLS: A REVIEW, Atomization and Sprays, vol.15, issue.6, pp.699-736, 2005.
DOI : 10.1615/AtomizSpr.v15.i6.50

J. Dewitte, P. Berthoumieu, and G. Lavergne, An experimental study of droplet hot wall interactions and a survey of the splashing regime, 5th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy conversion, pp.3-6, 2005.

L. H. Wachters and N. A. Westerling, The heat transfer from a hot wall to impinging water drops in the spheroidal state, Chemical Engineering Science, vol.21, issue.11, pp.1047-1056, 1966.
DOI : 10.1016/0009-2509(66)85100-X

M. A. Gonzales, G. L. Borman, and R. D. Reitz, A study of diesel cold starting using both cycle analysis and multidimensional calculations, SAE Tech Paper, vol.910180, 1991.

A. P. Watkins and D. M. Wang, A new model for diesel spray impaction on wall and comparison with experiments, Proc. Comodia, pp.243-248, 1990.

A. Karl and A. Frohn, Experimental investigation of interaction processes between droplets and hot walls, Physics of Fluids, vol.21, issue.4, pp.785-796, 2000.
DOI : 10.1016/0009-2509(66)85042-X

N. Hatta, H. Fujimoto, K. Kinoshita, and H. Takuda, Three-dimensional simulation of impingement of a liquid droplet on a flat surface in the Leidenfrost regime, Physics of Fluids, vol.17, 1997.

L. Rayleigh, On the Capillary Phenomena of Jets, Proceedings of the Royal Society of London, vol.29, issue.196-199, pp.71-97, 1879.
DOI : 10.1098/rspl.1879.0015

R. Chen, S. Chiu, and T. Lin, Resident time of a compound drop impinging on a hot surface, Applied Thermal Engineering, vol.27, issue.11-12, pp.2079-2085, 2007.
DOI : 10.1016/j.applthermaleng.2006.11.014

N. Hatta, H. Fujimoto, H. Takuda, K. Kinoshita, and O. Takahashi, Collision Dynamics of a Water Droplet Impinging on a Rigid Surface above the Leidenfrost Temperature., ISIJ International, vol.35, issue.1, pp.50-55, 1995.
DOI : 10.2355/isijinternational.35.50

C. X. Bai and A. D. Gosman, Mathematical Modelling of Wall Films Formed by Impinging Sprays, SAE Technical Paper Series, 1996.
DOI : 10.4271/960626

K. Park and A. P. Watkins, Comparison of wall spray impaction models with experimental data on drop velocities and sizes, International Journal of Heat and Fluid Flow, vol.17, issue.4, pp.424-438, 1996.
DOI : 10.1016/0142-727X(96)00049-5

M. Marengo, S. Sikalo, and C. Tropea, Impact of drops on inclined dry surfaces, Proc. ILASS Europe, 1998.

R. Schmehl, H. Rosskamp, M. Willmann, and S. Wittig, CFD analysis of spray propagation and evaporation including wall film formation and spray/film interactions, International Journal of Heat and Fluid Flow, vol.20, issue.5, pp.520-529, 1999.
DOI : 10.1016/S0142-727X(99)00041-7

A. Moita and A. Moreira, Development of empirical correlations to predict the secondary droplet size of impacting droplets onto heated surfaces, Experiments in Fluids, vol.283, issue.13, pp.755-768, 2009.
DOI : 10.1115/1.3450494

G. E. Cossali, M. Marengo, and M. Santini, Thermally induced secondary drop atomisation by single drop impact onto heated surfaces, International Journal of Heat and Fluid Flow, vol.29, issue.1, pp.167-177, 2008.
DOI : 10.1016/j.ijheatfluidflow.2007.09.006

Z. Han, Z. Xu, and N. Trigui, Spray/wall interaction models for multidimensional engine simulation, International Journal of Engine Research, vol.1, issue.1, p.127, 2000.
DOI : 10.1063/1.857840

G. E. Cossali, M. Marengo, and M. Santini, Secondary atomisation produced by single drop vertical impacts onto heated surfaces, Experimental Thermal and Fluid Science, vol.29, issue.8, pp.937-946, 2005.
DOI : 10.1016/j.expthermflusci.2004.12.003

A. S. Moita and A. L. Moreira, Drop impacts onto cold and heated rigid surfaces: Morphological comparisons, disintegration limits and secondary atomization, International Journal of Heat and Fluid Flow, vol.28, issue.4, pp.735-752, 2007.
DOI : 10.1016/j.ijheatfluidflow.2006.10.004

C. Mundo, Zur Sekundärzerstäubung newtonscher Fluide an Oberflächen, 1995.

K. Park, Development of a non-orthogonal grid computer code for the optimisation of direct injection diesel engine combustion chamber shapes, 1994.

A. L. Yarin and D. A. Weiss, Impact of drops on solid surfaces: self-similar capillary waves, and splashing as a new type of kinematic discontinuity, Journal of Fluid Mechanics, vol.25, issue.-1, pp.141-173, 1995.
DOI : 10.1063/1.1709031

J. D. Naber and P. Farrel, Hydrodynamics of Droplet Impingement on a Heated Surface, SAE Technical Paper Series, 1993.
DOI : 10.4271/930919

C. D. Stow and R. D. Steiner, The Physical Products of a Splashing Water Drop, Journal of the Meteorological Society of Japan. Ser. II, vol.55, issue.5, pp.518-531, 1977.
DOI : 10.2151/jmsj1965.55.5_518

S. W. Akhtar and A. J. Yule, Droplet Impaction on a heated surface at high Weber Numbers, ILASS Conference Proceedings Zurich, pp.2-6, 2001.

C. X. Bai and A. D. Gosman, Development of Methodology for Spray Impingement Simulation, SAE Technical Paper Series, 1995.
DOI : 10.4271/950283

A. Müller, E. Velios, K. Dullenkopf, and H. J. Bauer, From single droplet to spray wall interaction -Multiple droplet chains, ICLASS, 2009.

J. D. Bernardin and I. Mudawar, Film boiling heat transfer of droplet streams and sprays, International Journal of Heat and Mass Transfer, vol.40, issue.11, pp.2579-2593, 1997.
DOI : 10.1016/S0017-9310(96)00297-9

C. O. Pederson, An experimental study of the dynamic behavior and heat transfer characteristics of water droplets impinging upon a heated surface, International Journal of Heat and Mass Transfer, vol.13, issue.2, p.369, 1970.
DOI : 10.1016/0017-9310(70)90113-4

S. Deb and S. C. Yao, Analysis on film boiling heat transfer of impacting sprays, International Journal of Heat and Mass Transfer, vol.32, issue.11, pp.2099-2112, 1989.
DOI : 10.1016/0017-9310(89)90117-8

G. E. Kendall and W. M. Rohsenow, Heat transfer to impacting drops and post critical heat flux dispersed flow, 1978.

L. Bolle and J. C. Moureau, Spray cooling of hot surface, International Journal of Heat and Mass Transfer, vol.1, pp.1-97, 1982.

K. Takeuchi, J. Senda, and K. Yamada, Heat transfer characteristics and the breakup behavior of small droplets impinging upon a hot surface, ASME-JSME Thermal Engineering Joint Conference Proceedings, pp.165-172, 1983.

W. P. Klinzing, J. C. Rozzi, and I. Mudawar, Film and transition boiling correlations for quenching of hot surfaces with water sprays, Journal of Heat Treating, vol.8, issue.2, pp.91-103, 1992.
DOI : 10.1007/BF02833145

K. J. Choi and S. C. Yao, Mechanisms of film boiling heat transfer of normally impacting spray, International Journal of Heat and Mass Transfer, vol.30, issue.2, pp.311-318, 1987.
DOI : 10.1016/0017-9310(87)90119-0

I. V. Roisman and C. Tropea, Fluctuating flow in a liquid layer and secondary spray created by an impacting spray, International Journal of Multiphase Flow, vol.31, issue.2, pp.179-200, 2005.
DOI : 10.1016/j.ijmultiphaseflow.2004.11.001

A. L. Biance, F. Chevy, C. Clanet, G. Lagubeau, and D. Quere, On the elasticity of an inertial liquid shock, Journal of Fluid Mechanics, vol.554, issue.-1, pp.47-66, 2006.
DOI : 10.1017/S0022112006009189

Y. Guo and K. Mishima, A non-equilibrium mechanistic heat transfer model for post-dryout dispersed flow regime, Experimental Thermal and Fluid Science, vol.26, issue.6-7, pp.861-869, 2002.
DOI : 10.1016/S0894-1777(02)00195-4

P. Lavieille, Etude expérimentale du comportement aérothermique de gouttes en écoulement; réactifs ou non, par utilisation de la fluorescence induite par laser à deux couleurs, 2001.

F. Lelong, Expérimentation, modélisation et simulation de l'impact de gouttes d'eau sur le gainage gonflé des assemblages d'un coeur de REP en situation d'APRP, 2010.

F. P. Incropera, D. P. Dewitt, T. L. Bergman, and A. S. Lavine, Fundamentals of heat and mass transfer

J. Van-beeck and M. Riethmuller, Non-intrusive measurement of temperature and size of single falling raindrops, Applied Optics, vol.35, pp.1633-1639, 1995.

M. Vetrano, S. Gauthier, J. Van-beeck, P. Boulet, and J. Buchlin, Characterization of a non-isothermal water spray by global rainbow thermometry, Experiments in Fluids, vol.43, issue.1, pp.15-22, 2006.
DOI : 10.2351/1.4745251

P. Lavieille, F. Lemoine, G. Lavergne, and M. Lebouchã©, Evaporating and combusting droplet temperature measurements using two-color laser-induced fluorescence, Experiments in Fluids, vol.31, issue.1, pp.45-55, 2001.
DOI : 10.1007/s003480000257

J. Glovacki, Further investigation into the fluorescence quenching of dyes by neutral salts, Acta Physica Plonica, vol.15, pp.767-780, 1964.

P. Lavieille, A. Delconte, D. Blondel, M. Lebouchã©, and F. Lemoine, Non-intrusive temperature measurements using three-color laser-induced fluorescence, Experiments in Fluids, vol.36, issue.5, pp.706-716, 2004.
DOI : 10.1007/s00348-003-0748-0

G. Castanet, Etude aérothermique d'un jet de goutte monodisperse en évaporation et en combustion à l'aide de méthodes optiques, Thesis PhD, issue.1, 2004.

A. Delconte, Fluorescence induite par laser multibande appliquée à la mesure de température dans les milieux complexes, Thesis PhD, 2009.

A. Labergue, V. Deprã©durand, A. Delconte, G. Castanet, and F. Lemoine, New insight into two-color LIF thermometry applied to temperature measurements of droplets, Experiments in Fluids, vol.40, issue.2, pp.547-556, 2010.
DOI : 10.1007/BF00187413

URL : https://hal.archives-ouvertes.fr/hal-01570426

J. A. Sutton, B. T. Fisher, and J. W. Fleming, A laser-induced fluorescence measurement for aqueous fluid flows with improved temperature sensitivity, Experiments in Fluids, vol.29, issue.5, pp.869-881, 2008.
DOI : 10.1007/s00348-008-0506-4

J. Sakakibara and R. J. Adrian, Whole field measurement of temperature in water using two-color laser induced fluorescence, Experiments in Fluids, vol.26, issue.1-2, pp.7-15, 1999.
DOI : 10.1007/s003480050260

J. Sakakibara and R. J. Adrian, Measurement of temperature field of a Rayleigh-B??nard convection using two-color laser-induced fluorescence, Experiments in Fluids, vol.8, issue.3, pp.331-340, 2004.
DOI : 10.1088/0957-0233/8/12/008

M. Shafii, C. Lum, and M. Koochesfahani, In situ LIF temperature measurements in aqueous ammonium chloride solution during uni-directional solidification, Experiments in Fluids, vol.237, issue.4, pp.651-662
DOI : 10.1007/s00348-004-0821-3

S. M. Soloff, R. J. Adrian, and Z. C. Liu, Distortion compensation for generalized stereoscopic particle image velocimetry, Measurement Science and Technology, vol.8, issue.12, pp.1441-1454, 1997.
DOI : 10.1088/0957-0233/8/12/008

V. Depredurand, Approche expérimentale de l'évaporation de sprays de combustibles multicomposant, Thesis PhD, 2009.

N. Damaschke, G. Gouesbet, G. Gréhan, H. Mignon, and C. Tropea, Response of Phase Doppler Anemometer systems to nonspherical droplets, Applied Optics, vol.37, issue.10, pp.1752-1761, 1998.
DOI : 10.1364/AO.37.001752

URL : https://hal.archives-ouvertes.fr/hal-01596844

A. Lecuona, P. A. Sosa, P. A. Rodriguez, and R. I. Zequeira, Volumetric characterization of dispersed two-phase flows by digital image analysis, Measurement Science and Technology, vol.11, issue.8, 2000.
DOI : 10.1088/0957-0233/11/8/309

J. B. Blaisot and J. Yon, Droplet size and morphology characterization for dense sprays by image processing: application to the Diesel spray, Experiments in Fluids, vol.59, issue.10, pp.977-994, 2005.
DOI : 10.1615/AtomizSpr.v11.i4.20

URL : https://hal.archives-ouvertes.fr/hal-01613158

J. T. Kashdan, J. S. Shrimpton, and A. Whybrew, Two-Phase Flow Characterization by Automated Digital Image Analysis. Part 1: Fundamental Principles and Calibration of the Technique, Particle & Particle Systems Characterization, vol.21, issue.6, pp.387-397, 2003.
DOI : 10.1615/AtomizSpr.v11.i4.20

K. S. Kim and S. K. Kim, DROP SIZING AND DEPTH-OF-FIELD CORRECTION IN TV IMAGING, Atomization and Sprays, vol.4, issue.1, pp.65-78, 1994.
DOI : 10.1615/AtomizSpr.v4.i1.30

D. Lebrun, C. E. Touil, and C. Özkul, Methods for the deconvolution of defocused-image pairs recorded separately on two CCD cameras: application to particle sizing, Applied Optics, vol.35, issue.32, pp.6375-6381, 1996.
DOI : 10.1364/AO.35.006375

H. Malot and J. Blaisot, Droplet Size Distribution and Sphericity Measurements of Low-Density Sprays Through Image Analysis, Particle & Particle Systems Characterization, vol.17, issue.4, pp.146-158, 2000.
DOI : 10.1002/1521-4117(200012)17:4<146::AID-PPSC146>3.0.CO;2-4

E. Fantini, L. Tognotti, and A. Tonazzini, Drop size distribution in sprays by image processing, Computers & Chemical Engineering, vol.14, issue.11, pp.1201-1211, 1990.
DOI : 10.1016/0098-1354(90)80002-S

K. U. Koh, J. Y. Kim, and S. Y. Lee, Improvement of Pattern Recognition Algorithm for Drop Size Measurement, Atomization and Sprays, vol.9, pp.313-329, 1999.

B. Richter, K. Dullenkopf, and H. J. Bauer, Investigation of secondary droplet characteristics produced by an isooctane drop chain impact onto a heated piston surface, Experiments in Fluids, vol.283, issue.1755, pp.351-363, 2005.
DOI : 10.1615/AtomizSpr.v10.i3-5.80

A. Müller, K. Dullenkopf, and H. Bauer, Application of an Extended Particle Tracking Method to Analyze Droplet Wall Interaction, 14th Int Symp on Applications of Laser Techniques to Fluid Mechanics, 2008.

K. J. Hay, Z. C. Liu, and T. J. Hanratty, A backlighted imaging technique for particle size measurements in two-phase flows, Experiments in Fluids, vol.25, issue.3, pp.226-232, 1998.
DOI : 10.1007/s003480050225

J. Y. Kim, J. H. Chu, and S. Y. Lee, IMPROVEMENT OF PATTERN RECOGNITION ALGORITHM FOR DROP SIZE MEASUREMENT, Atomization and Sprays, vol.9, issue.3, pp.65-78, 1999.
DOI : 10.1615/AtomizSpr.v9.i3.50

S. Beucher and F. Meyer, The morphological approach of segmentation: the watershed transformation, Mathematical Morphology in Image Processing, 1992.

N. Chenouard, I. Bloch, and J. Olivo-marin, Multiple hypothesis tracking in cluttered condition, 2009 16th IEEE International Conference on Image Processing (ICIP), 2009.
DOI : 10.1109/ICIP.2009.5414278

D. B. Reid, An algorithm for tracking multiple targets, IEEE Trans. on Automatic Control, vol.AC, pp.843-854, 1979.

K. U. Koh, J. Y. Kim, and S. Y. Lee, DETERMINATION OF IN-FOCUS CRITERIA AND DEPTH OF FIELD IN IMAGE PROCESSING OF SPRAY PARTICLES, Atomization and Sprays, vol.11, issue.4, pp.317-333, 2001.
DOI : 10.1615/AtomizSpr.v11.i4.20

S. Lee and Y. Kim, Sizing of spray particles using image processing technique, KSME International Journal, vol.38, issue.11, pp.879-894, 2004.
DOI : 10.1016/0017-9310(94)00314-L

H. Lamb, Hydrodynamics, 1932.

I. V. Roisman, K. , and C. Tropea, Spray impact: Rim transverse instability initiating fingering and splash, and description of a secondary spray, Physics of Fluids, vol.11, issue.10, p.102104, 2006.
DOI : 10.1007/s00348-005-0996-2

G. Castanet, T. Liénart, and F. Lemoine, Dynamics and temperature of droplets impacting onto a heated wall, International Journal of Heat and Mass Transfer, vol.52, issue.3-4, pp.670-679, 2009.
DOI : 10.1016/j.ijheatmasstransfer.2008.07.024

URL : https://hal.archives-ouvertes.fr/hal-01570408