G. Denier, Aciéries de conversion -Aspects opérationnels, équipements et ingénierie, Les techniques de l'ingénieur, 2010.

A. Berthet, Comparaison entre les procédés de conversion à soufflage par le haut et à soufflage par le fond, Revue de Metallurgie. Cahiers D'Informations Techniques, pp.213-228, 1980.
DOI : 10.1051/metal/198077030213

S. C. Koria, Principles and applications of gas injection in steelmaking practice, Scandinavian Journal of Metallurgy, vol.22, issue.5, pp.271-279, 1993.

F. Kawa, Beitrag zur Dimensionierung von Sauerstoffkonvertern (Contribution to the steelmaking converter sizing), Berg-und Hüttenmännische Monatshefte, p.431, 1979.

V. Arcelormittal, Internal document, IRSID, ArcelorMittal Maizières, 1994.

N. Croft, K. Pericleous, and M. Cross, PHYSICA: A multiphysics environment for complex flow processes, Laminar and Tur bulent Flow, pp.1269-1280, 1995.

G. N. Abramovich, The theory of turbulent jets, 1963.

P. Chassaing, Turbulence en mécanique des fluides : analyse du phénomène en vue de sa modélisation à l'usage de l'ingénieur, 2000.

M. H. Gazzah, M. Sassi, B. Sarh, and I. Gokalp, Simulation num??rique des jets turbulents subsoniques ?? masse volumique variable par le mod??le k?????, International Journal of Thermal Sciences, vol.41, issue.1, pp.51-62, 2002.
DOI : 10.1016/S1290-0729(01)01303-5

H. Y. Hwang, A study of impinging gas jets on liquid surfaces, 2008.

B. Cushman-roisin, Environnemental fluid mechanics, 2009.

E. Krause, Fluid mechanics: with problems and s olutions, 2005.

W. J. Devenport, Flow pattern of de Laval nozzle, 2009.

K. Naito, Y. Ogawa, T. Inomoto, S. Kitamura, and M. Yano, Characteristics of Jets from Top-blown Lance in Converter., ISIJ International, vol.40, issue.1, pp.23-30, 2000.
DOI : 10.2355/isijinternational.40.23

V. Okhotskii, Structure of gas jets Steel in the USSR, pp.489-490, 1983.

B. Allemand, P. Bruchet, C. Champinot, S. Melen, and F. Porzucek, Theoretical and experimental study of supersonic oxygen jets. Industrial application in EAF, Revue de Metallurgie. Cahiers D'Informations Techniques, pp.571-587, 2001.
DOI : 10.1051/metal:2001107

H. Odenthal, J. Kempken, J. Schlu, and W. Emling, Advantageous numerical simulation of the converter blowing process, Iron and Steel Technology, vol.4, issue.11, pp.71-89, 2007.

T. Yukari and Y. Higuchi, Fluid Flow Analysis of Jets from Nozzles in Top Blown Process, ISIJ International, vol.43, issue.2, pp.209-215, 2002.

S. Eletribi, D. K. Mukherjee, and V. Prasad, Experiments on liquid surface deformation upon impingement by a gas jet, American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, vol.244, pp.43-52, 1997.

S. K. Sharma, J. W. Hlinka, and D. W. Kern, The bath circulation, jet penetration and high temperature reaction zone in BOF steelmaking, Steelmaking Conference Proceedings, ISS, pp.181-197, 1977.

R. B. Banks and D. V. Chandrasekhara, Experimental investigation of the penetration of a high-velocity gas jet through a liquid surface, Journal of Fluid Mechanics, vol.5, issue.01, pp.13-35, 1963.
DOI : 10.1088/0508-3443/5/1/306

N. A. Molloy, Impinging jet flow in a two-phase system. The basic flow pattern, J. Iron Steel Inst, vol.208, issue.10, pp.943-950, 1970.

W. E. Olmstead and S. Raynor, Depression of an infinite liquid surface by an incompressible gas jet, Journal of Fluid Mechanics, vol.10, issue.04, pp.561-576, 1964.
DOI : 10.1017/S0022112064000921

T. Kumagai and M. Iguchi, Instability Phenomena at Bath Surface Induced by Top Lance Gas Injection, ISIJ International, vol.41, issue.Suppl, pp.52-55, 2001.
DOI : 10.2355/isijinternational.41.Suppl_S52

A. Nordquist, N. Kumbhat, L. Jonsson, and P. Jonsson, The Effect of Nozzle Diameter, Lance Height and Flow Rate on Penetration Depth in a Top-blown Water Model, steel research international, vol.1, issue.1, pp.82-90, 2006.
DOI : 10.1002/srin.200200172

S. C. Koria and K. W. Lange, Penetrability of impinging gas jets in molten steel bath, Steel Research, vol.3, issue.6, pp.421-426, 1987.
DOI : 10.1007/BF02643020

T. Shimada, T. Akiyama, E. Kasai, and J. Yagi, Observation of Molten Slag Surface under Gas Impingement by X-ray Computed Tomography., ISIJ International, vol.40, issue.10, pp.958-963, 2000.
DOI : 10.2355/isijinternational.40.958

F. R. Cheslak, J. A. Nicholls, and M. Sichel, Cavities formed on liquid surfaces by impinging gaseous jets, Journal of Fluid Mechanics, vol.5, issue.01, pp.55-63, 1969.
DOI : 10.1088/0508-3443/5/1/306

F. Qian, R. Mutharasan, and B. Farouk, Studies of interface deformations in single- and multi-layered liquid baths due to an impinging gas jet, Metallurgical and Materials Transactions B, vol.115, issue.4, pp.911-920, 1996.
DOI : 10.2355/isijinternational.30.305

O. Olivares, A. Elias, R. Sanchez, M. Diaz-cruz, and R. Morales, Physical and mathematical models of gas-liquid fluid dynamics in LD converters, Steel Research, vol.239, issue.2, pp.44-51, 2002.
DOI : 10.1007/s11663-996-0004-0

A. R. Meidani, M. Isac, A. Richardson, A. Cameron, and R. I. Guthrie, Modelling Shrouded Supersonic Jets in Metallurgical Reactor Vessels, ISIJ International, vol.44, issue.10, pp.1639-1645, 2004.
DOI : 10.2355/isijinternational.44.1639

D. Huin, Profondeur de pénétration d'un jet d'oxygène dans le métal liquide, Internal report, 1986.

J. Szekely and S. Asai, Turbulent fluid flow phenomena in metals processing operations: Mathematical description of the fluid flow field in a bath caused by an impinging gas jet, Metallurgical Transactions, vol.12, issue.2, pp.463-467, 1974.
DOI : 10.1007/BF02644115

J. Zhang, S. Du, and S. Wei, Flow field in bath agitated by symmetrically placed impinging gas jet and submerged gas stream, Ironmaking and Steelmaking, vol.12, issue.6, pp.249-255, 1985.

A. V. Nguyen and G. M. Evans, Computational fluid dynamics modelling of gas jets impinging onto liquid pools, Applied Mathematical Modelling, vol.30, issue.11, pp.1472-1484, 2006.
DOI : 10.1016/j.apm.2006.03.015

M. Ersson, A. Tilliander, L. Jonsson, and P. Jonsson, A Mathematical Model of an Impinging Air Jet on a Water Surface, ISIJ International, vol.48, issue.4, pp.377-384, 2008.
DOI : 10.2355/isijinternational.48.377

M. Ersson, A. Tilliander, and P. Jonsson, Coupled thermodynamic and kinetic modeling of a top-blown bath, Proceedings of Sohn International Symp. Advanced Processing of metals and materials, Thermo and Physicochemical Principles, pp.271-281, 2006.

M. Ersson, L. Hoglund, A. Tilliander, L. Jonsson, and P. Jonsson, Dynamic Coupling of Computational Fluid Dynamics and Thermodynamics Software: Applied on a Top Blown Converter, ISIJ International, vol.48, issue.2, pp.147-153, 2008.
DOI : 10.2355/isijinternational.48.147

M. Barron, C. Lopez, and I. Hilerio, Numerical evaluation of the performance of a BOF steelmaking lance, pp.303-310, 2008.

S. Koria and K. Lange, A new approach to investigate the drop size distribution in basic oxygen steelmaking, Metallurgical Transactions B, vol.3, issue.no. 4, pp.109-116, 1984.
DOI : 10.1179/000844379795317904

N. Standish and Q. L. He, Drop generation due to an impinging jet and the effect of bottom blowing in the steelmaking vessel., ISIJ International, vol.29, issue.6, pp.455-461, 1989.
DOI : 10.2355/isijinternational.29.455

Q. L. He and N. Standish, A model study of droplet generation in the BOF steelmaking., ISIJ International, vol.30, issue.4, pp.305-309, 1990.
DOI : 10.2355/isijinternational.30.305

Q. Lin-he and N. Standish, Model study of residence time of metal droplets in the slag in BOF steelmaking, ISIJ International, vol.30, issue.5, pp.356-361, 1990.

Y. Higuchi and Y. Tago, Effect of Lance Design on Jet Behavior and Spitting Rate in Top Blown Process., ISIJ International, vol.41, issue.12, pp.1454-1459, 2001.
DOI : 10.2355/isijinternational.41.1454

M. Luomala, T. Fabritius, E. Virtanen, T. Siivola, and J. Ha?-rkki, Splashing and Spitting Behaviour in the Combined Blown Steelmaking Converter., ISIJ International, vol.42, issue.9, pp.944-949, 2002.
DOI : 10.2355/isijinternational.42.944

G. A. Subagyo, K. Brooks, G. Coley, and . Irons, Generation of Droplets in Slag-Metal Emulsions through Top Gas Blowing, ISIJ International, vol.43, issue.7, pp.983-989, 2003.
DOI : 10.2355/isijinternational.43.983

Y. Higuchi and Y. Tago, Effect of Nozzle Twisted Lance on Jet Behavior and Spitting Rate in Top Blown Process, ISIJ International, vol.43, issue.9, pp.1410-1414, 2003.
DOI : 10.2355/isijinternational.43.1410

A. Koohi, M. Halali, M. Askari, and M. Manzari, Investigation and modeling of splashing in the Peirce Smith converter, Chemical Product and Process Modeling, 2008.

N. I. Kolev, Multiphase Flow Dynamics 2: Thermal and M echanical Interactions, 2005.
DOI : 10.1007/978-3-642-20598-9

H. Gou, G. Irons, W. Lu, and Z. Du, Entrainment and post-combustion in oxygen jets under steelmaking and smelting/reduction conditions, I&SM, vol.22, issue.1, pp.47-54, 1995.

M. Hirai, R. Tsujino, T. Mukai, T. Harada, and M. Omori, Mechanism of post combustion in the converter, Transactions of the Iron and Steel Institute of Japan, pp.805-813, 1987.

D. Huin, J. Landry, J. Reboul, and Y. Zbaczyniak, Study of post combustion mechanisms in a 6 t pilot oxygen converter, Revue de Metallurgie. Cahiers D'Informations Techniques, pp.775-781, 1989.
DOI : 10.1051/metal/198986100775

D. Huin, H. Gaye, J. P. Reboul, and Y. Zbaczyniak, Modélisation de la post-combustion au convertisseur, Internal report, 1988.

D. Nakazono, K. Abe, M. Nishida, and K. Kurita, Supersonic O2-jet Impingement on Liquid Iron with Surface Chemistry, ISIJ International, vol.44, issue.1, pp.91-99, 2004.
DOI : 10.2355/isijinternational.44.91

J. Huber, J. Lehmann, and R. Cadet, Comprehensive dynamic model for BOF process: a glimpse into thermal efficiency mechanisms, Revue de M etallurgie. Cahiers D'Informations Techniques, pp.121-126, 2008.
DOI : 10.1051/metal:2008024

L. Zhang and F. Oeters, A model of post-combustion in iron-bath reactors, part 1: theoretical basis, Steel Research, vol.29, issue.3, pp.95-106, 1991.
DOI : 10.1007/978-3-642-88607-2

L. Zhang and F. Oeters, A model of post-combustion in iron-bath reactors, part 2: results for combustion with oxygen, Steel Research, vol.62, issue.3, pp.107-116, 1991.
DOI : 10.1007/978-3-662-02293-1

H. Gou, G. Irons, and W. Lu, Mathematical modeling of postcombustion in a KOBM converter, Metallurgical Transactions B, vol.3, issue.1, pp.179-188, 1993.
DOI : 10.2355/isijinternational1966.28.288

S. T. Johansen, J. Wu, and W. Shyy, Filter-based unsteady RANS computations, International Journal of Heat and Fluid Flow, vol.25, issue.1, pp.10-21, 2004.
DOI : 10.1016/j.ijheatfluidflow.2003.10.005

URL : http://www.carpet.ntnu.no/documents/publications/4.pdf

D. B. Spalding, A novel finite difference formulation for differential expressions involving both first and second derivatives, International Journal for Numerical Methods in Engineering, vol.4, issue.4, pp.551-559, 1972.
DOI : 10.1002/nme.1620040409

P. H. Gaskell and A. K. Lau, Curvature-compensated convective transport: SMART, A new boundedness- preserving transport algorithm, International Journal for Numerical Methods in Fluids, vol.15, issue.6, pp.617-641, 1988.
DOI : 10.1002/fld.1650080602

C. W. Hirt and B. D. Nichols, Volume of fluid (VOF) method for the dynamics of free boundaries, Journal of Computational Physics, vol.39, issue.1, pp.201-225, 1981.
DOI : 10.1016/0021-9991(81)90145-5

K. Pericleous, G. Djambazov, B. Lebon, T. Croft, J. Domgin et al., Timedependent modelling and experimental validation of the metal/flux interface in a continuous casting mould, Revue de Metallurgie. Cahiers D'Informations Techniques, pp.207-217, 2008.

G. S. Lebon, Unstructured finite volume algorithms for compressible multiphase flow, 2011.

S. Heinz, A model for the reduction of the turbulent energy redistribution by compressibility, Physics of Fluids, vol.15, issue.11, pp.3580-3583, 2003.
DOI : 10.1063/1.868329

K. Abdol-hamid, S. Paul-pao, S. Massey, and A. Elmiligui, Temperature Corrected Turbulence Model for High Temperature Jet Flow, Journal of Fluids Engineering, vol.17, issue.5, pp.844-850, 2004.
DOI : 10.1115/1.1792266

M. Alam, J. Naser, and G. Brooks, Computational Fluid Dynamics Simulation of Supersonic Oxygen Jet Behavior at Steelmaking Temperature, Metallurgical and M aterials Transactions B: Process Metallurgy and M aterials Processing Science, pp.636-645, 2010.
DOI : 10.1017/CBO9780511840531

I. Sumi, Y. Kishimoto, Y. Kikuchi, and H. Igarashi, Effect of High-temperature Field on Supersonic Oxygen Jet Behavior, ISIJ International, vol.46, issue.9, pp.1312-1317, 2006.
DOI : 10.2355/isijinternational.46.1312

H. J. Hussein, S. P. Capp, and W. K. George, Velocity measurements in a high-Reynolds-number, momentum-conserving, axisymmetric, turbulent jet, Journal of Fluid Mechanics, vol.18, issue.-1, pp.31-75, 1994.
DOI : 10.1007/BF02120346

S. B. Pope, An explanation of the turbulent round-jet/plane-jet anomaly, AIAA Journal, vol.16, issue.3, pp.279-281, 1978.
DOI : 10.2514/3.49308

T. Shih, W. Liou, A. Shabbir, Z. Yang, and J. Zhu, A new k-?? eddy viscosity model for high reynolds number turbulent flows, Computers & Fluids, vol.24, issue.3, pp.227-238, 1995.
DOI : 10.1016/0045-7930(94)00032-T

B. E. Launder, Second-moment closure: present??? and future?, International Journal of Heat and Fluid Flow, vol.10, issue.4, pp.282-300, 1989.
DOI : 10.1016/0142-727X(89)90017-9

P. A. Durbin, Separated flow computations with the k-epsilon-v-squared model, AIAA Journal, vol.99, issue.1, pp.659-664, 1995.
DOI : 10.1017/S0022112082002110

D. Rutledge, Study of a gas jet impinging a liquid surface, Internship final report, 2009.

D. B. Spalding, Combustion and Mass Transfer, 1978.

I. Glassman, Combustion, Third Edition, 1996.

L. Hjertager, B. Hjertager, and T. Solberg, CFD modelling of fast chemical reactions in turbulent liquid flows, Computers & Chemical Engineering, vol.26, issue.4-5, pp.507-515, 2002.
DOI : 10.1016/S0098-1354(01)00799-2

A. Kaizawa, N. Sasaki, T. Inomoto, and Y. Ogawa, Influence of post combustion on characteristics of oxygen jet in BOF, Proceedings of 8th International Conference on CFD in Oil & Gas, Metallurgical and Process Industries SINTEF/NTNU, 2011.

T. Poinsot and D. Veynante, Theoretical and numerical combustion, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00270731

F. A. Williams, Combustion theory: The f undamental theory of chemically reacting flow systems, 1985.

K. Morohoshi, M. Uchikoshi, M. Isshiki, and H. Fukuyama, Surface Tension of Liquid Iron as Functions of Oxygen Activity and Temperature, ISIJ International, vol.51, issue.10, pp.1580-1586, 2011.
DOI : 10.2355/isijinternational.51.1580

R. B. Banks and D. V. Chandrasekhara, Experimental investigation of the penetration of a high-velocity gas jet through a liquid surface, Journal of Fluid Mechanics, vol.5, issue.01, pp.13-35, 1963.
DOI : 10.1088/0508-3443/5/1/306

A. Nordquist, N. Kumbhat, L. Jonsson, and P. Jonsson, The Effect of Nozzle Diameter, Lance Height and Flow Rate on Penetration Depth in a Top-blown Water Model, steel research international, vol.1, issue.1, pp.82-90, 2006.
DOI : 10.1002/srin.200200172

O. Olivares, A. Elias, R. Sanchez, M. Diaz-cruz, and R. Morales, Physical and mathematical models of gas-liquid fluid dynamics in LD converters, Steel Research, vol.239, issue.2, pp.44-51, 2002.
DOI : 10.1007/s11663-996-0004-0

A. V. Nguyen and G. M. Evans, Computational fluid dynamics modelling of gas jets impinging onto liquid pools, Applied Mathematical Modelling, vol.30, issue.11, pp.1472-1484, 2006.
DOI : 10.1016/j.apm.2006.03.015

M. Ersson, L. Hoglund, A. Tilliander, L. Jonsson, and P. Jonsson, Dynamic Coupling of Computational Fluid Dynamics and Thermodynamics Software: Applied on a Top Blown Converter, ISIJ International, vol.48, issue.2, pp.147-153, 2008.
DOI : 10.2355/isijinternational.48.147

L. Zhang and F. Oeters, A model of post-combustion in iron-bath reactors, part 1: theoretical basis, Steel Research, vol.29, issue.3, pp.95-106, 1991.
DOI : 10.1007/978-3-642-88607-2

L. Zhang and F. Oeters, A model of post-combustion in iron-bath reactors, part 2: results for combustion with oxygen, Steel Research, vol.62, issue.3, pp.107-116, 1991.
DOI : 10.1007/978-3-662-02293-1

H. Gou, G. Irons, and W. Lu, Mathematical modeling of postcombustion in a KOBM converter, Metallurgical Transactions B, vol.3, issue.1, pp.179-188, 1993.
DOI : 10.2355/isijinternational1966.28.288

J. Huber, J. Lehmann, and R. , Comprehensive dynamic model for BOF process: a glimpse into thermal efficiency mechanisms, Revue de M??tallurgie, vol.105, issue.3, pp.121-126, 2008.
DOI : 10.1051/metal:2008024

N. Croft, K. Pericleous, and M. Cross, Numerical Methods in Laminar and Turbulent Flow, pp.1269-1280, 1995.

M. Alam, J. Naser, and G. Brooks, Computational Fluid Dynamics Simulation of Supersonic Oxygen Jet Behavior at Steelmaking Temperature, Metallurgical and Materials Transactions B, vol.49, issue.3, pp.636-645, 2010.
DOI : 10.1017/CBO9780511840531

B. Lebon, Unstructured finite volume algorithms for compressible multiphase flow, 2011.

I. Sumi, Y. Kishimoto, Y. Kikuchi, and H. Igarashi, Effect of High-temperature Field on Supersonic Oxygen Jet Behavior, ISIJ International, vol.46, issue.9, pp.1312-1317, 2006.
DOI : 10.2355/isijinternational.46.1312

S. T. Johansen, J. Wu, and W. Shyy, Filter-based unsteady RANS computations, International Journal of Heat and Fluid Flow, vol.25, issue.1, pp.10-21, 2004.
DOI : 10.1016/j.ijheatfluidflow.2003.10.005

URL : http://www.carpet.ntnu.no/documents/publications/4.pdf

C. W. Hirt and B. D. Nichols, Volume of fluid (VOF) method for the dynamics of free boundaries, Journal of Computational Physics, vol.39, issue.1, pp.201-225, 1981.
DOI : 10.1016/0021-9991(81)90145-5

D. Wheeler, Computational modelling of surface tension phenomena in metals processing, 2000.

D. B. Spalding, Combustion and mass transfer, 1979.

L. Hjertager, B. Hjertager, and T. Solberg, CFD modelling of fast chemical reactions in turbulent liquid flows, Computers & Chemical Engineering, vol.26, issue.4-5, pp.507-515, 2002.
DOI : 10.1016/S0098-1354(01)00799-2

F. Qian, R. Mutharasan, and B. Farouk, Studies of interface deformations in single- and multi-layered liquid baths due to an impinging gas jet, Metallurgical and Materials Transactions B, vol.115, issue.4, pp.911-920, 1996.
DOI : 10.2355/isijinternational.30.305

B. E. Launder, Second-moment closure: present??? and future?, International Journal of Heat and Fluid Flow, vol.10, issue.4, pp.282-300, 1989.
DOI : 10.1016/0142-727X(89)90017-9