A. Ajji, Interphase and Compatibilization by Addition of a Compatibilizer, Thermodynamics and Rheology / auteur du livre Utracki L.A.. -Munich, 1990.

A. J. Amass, K. L. N-'goala, B. J. Tighe, and F. Schué, Polylactic acids produced from l - and dl -lactic acid anhydrosulfite: stereochemical aspects, Polymer, vol.40, issue.18, pp.5073-5078, 1999.
DOI : 10.1016/S0032-3861(98)00733-2

V. D. Athawale and . Lele-k, Graft copolymerization onto starch. II. grafting of acrylic acid and preparation of its hydrogels, pp.21-27, 1998.

L. Averous, Biodegradable Multiphase Systems Based on Plasticized Starch: A Review, Journal of Macromolecular Science, Part C: Polymer Reviews, vol.3, issue.3, pp.231-274
DOI : 10.1016/0141-8130(96)81838-1

L. Avérous, Etude de systèmes polymères multiphasés: approache des relations matériaux-procédéspropriétés [Rapport] : Habilitation à diriger des recherches. -[s.l.] : Université de Reims Champagne- Ardenne, p.46, 2002.

L. Averous, L. Moro, P. Dole, and C. Fringant, Properties of thermoplastic blends: starchpolycaprolactone, pp.4157-4167, 2000.

W. Banks, Starch and it's components, 1975.

L. Belard, Nouvelles stratègie d'hydrophobation de matériaux à base d'amidon plastifié [Rapport]. [s .l, 2007.

B. J. Bentley and L. G. Leal, A computer-controlled four-roll mill for investigations of particle and drop dynamics in two-dimensional linear shear flows, Journal of Fluid Mechanics, vol.167, issue.-1, pp.219-240, 1986.
DOI : 10.1002/pol.1981.180190402

G. Biresaw and C. J. Carriere, Correlation between mechanical adhesion and interfacial properties of starch/biodegradable polyester blends, Journal of Polymer Science Part B: Polymer Physics, vol.67, issue.9, pp.920-930, 2001.
DOI : 10.1002/polb.1067

N. Birta, N. Doca, G. Vlase, and T. Vlase, Kinetic of sorbitol decomposition under non-isothermal conditions, Journal of Thermal Analysis and Calorimetry, vol.3, issue.2, pp.635-638, 2008.
DOI : 10.1007/s10973-007-7938-6

J. Brisson, H. Chanzy, and W. T. Winter, The crystal and molecular structure of VH amylose by electron diffraction analysis, International Journal of Biological Macromolecules, vol.13, issue.1, pp.31-39, 1991.
DOI : 10.1016/0141-8130(91)90007-H

URL : https://hal.archives-ouvertes.fr/hal-00310310

H. Bizot, L. Bail, P. Leroux, B. Davy, J. Roger et al., Calorimetric evaluation of the glass transition in hydrated, linear and branched polyanhydroglucose compounds, Carbohydrate Polymers, vol.32, issue.1, pp.33-50, 1997.
DOI : 10.1016/S0144-8617(96)00146-4

A. Buléon, P. Colonna, V. Planchot, and S. Ball, Starch granules: structure and biosynthesis, International Journal of Biological Macromolecules, vol.23, issue.2, pp.85-112, 1998.
DOI : 10.1016/S0141-8130(98)00040-3

A. Buléon, M. M. Delage, J. Brisson, and H. Chanzy, Single crystals of V amylose complexed with isopropanol and acetone, International Journal of Biological Macromolecules, vol.12, issue.1, pp.25-33, 1990.
DOI : 10.1016/0141-8130(90)90078-O

D. Carlson, L. Nie, R. Nayaran, and P. Dubois, Maleation of polylactide (PLA) by reactive extrusion, Journal of Applied Polymer Science, vol.33, issue.4, pp.477-485, 1999.
DOI : 10.1002/pola.1995.080330509

R. Chandra and R. Rustgi, Biodegradation of maleated linear low-density polyethylene and starch blends, Polymer Degradation and Stability, vol.56, issue.2, p.185, 1997.
DOI : 10.1016/S0141-3910(96)00212-1

L. Chen, X. Qiu, M. Deng, Z. Hong, R. Luo et al., The starch grafted poly(l-lactide) and the physical properties of its blending composites, Polymer, vol.46, issue.15, pp.5723-5729, 2005.
DOI : 10.1016/j.polymer.2005.05.053

A. K. Chesters, The modeling of coalescence processes in fluid-liquid dispersions: a review of current undrestanding, pp.259-270, 1991.

C. G. Cho and K. Lee, Preparation of starch-g-polystyrene copolymer by emulsion polymerisation, pp.125-155, 2002.

E. J. Choi, C. H. Kim, and J. K. Park, -Polycaprolactone Copolymer, Macromolecules, vol.32, issue.22, pp.7402-7408, 1999.
DOI : 10.1021/ma981453f

D. Cooke and M. J. Gidely, Loss of crystalline and molecular order during starch gelatinisation: origin of the enthalpic transition, Carbohydrate Research, vol.227, p.103, 1992.
DOI : 10.1016/0008-6215(92)85063-6

B. E. Coopper, New silylating agents, Journal of Organometallic Chemistry, vol.118, issue.2, p.135, 1976.
DOI : 10.1016/S0022-328X(00)92148-X

D. Roz, A. D. Carvalho, A. J. Gandini, A. Curvelo, and A. A. , The effect of placticizers on thermplastic starch compositions obtained by melt processing, pp.417-424, 2006.

R. A. De-graaf, A. P. Karmen, and L. P. Janssen, Material Properties and Glass Transition Temperatures of Different Thermoplastic Starches After Extrusion Processing, Starch - St??rke, vol.44, issue.2, pp.80-86, 2003.
DOI : 10.1002/star.19920440905

P. Dubois, M. Krishnan, and R. Narayan, Aliphatic polyester-grafted starch-like polysaccharides by ring opening polymerisation, pp.3091-3100, 1999.

B. D. Favis, The effect of processing parameters on the morphology of an immiscible binary blend, Journal of Applied Polymer Science, vol.39, issue.2, pp.285-300, 1990.
DOI : 10.1002/app.1990.070390207

B. D. Favis, The effect of processing parameters on the morphology of an immiscible binary blend [Revue]. -1990

B. D. Favis and J. P. Chalifoux, The effect of viscosity ratio on the morphology of propylene/ polycarbonate blends during processing, Polymer Engineering and Science, 1987.

N. Follain, C. Joly, P. Dole, and C. Bliard, Mechanical properties of starch-based materials. I. Short review and complementary experimental analysis, Journal of Applied Polymer Science, vol.192, issue.5, pp.1783-1794, 2005.
DOI : 10.1002/masy.19971140122

URL : https://hal.archives-ouvertes.fr/hal-00019125

P. M. Forssell, J. M. Mikkilä, G. K. Moates, and R. Parker, Phase and glass transition behaviour of concentrated barley starch-glycerol-water mixtures, amodel for thermoplastic starch, pp.275-282, 1997.

F. D. Dans, Starch Chemistry and Technology. par BeMiller J

N. Fringant, J. Desbrières, M. Milas, M. Rinaudo, C. Joly et al., Characterisation of sorbed water molecules on neutral and ionic polysaccharides, International Journal of Biological Macromolecules, vol.18, issue.4, pp.281-286, 1996.
DOI : 10.1016/0141-8130(95)01087-4

URL : https://hal.archives-ouvertes.fr/hal-01585461

U. Funke, W. Bergthaller, and M. G. Lindhauer, Processing and characterization of biodegradable products based on starch, Polymer Degradation and Stability, vol.59, issue.1-3, pp.293-293, 1998.
DOI : 10.1016/S0141-3910(97)00163-8

. Gang-l and B. D. Favis, Morphology development and interfacial interactions in polycaprolactone/thermoplastic-strach Blends, pp.321-333

S. Gaudin, D. Lourdin, P. Forssell, and P. Colonna, Antiplasticisation and oxygen permeability of starch???sorbitol films, Carbohydrate Polymers, vol.43, issue.1, pp.33-37, 2000.
DOI : 10.1016/S0144-8617(99)00206-4

S. Gaudin, D. Lourdin, P. M. Forssell, and P. Colonna, Antiplasticisation and oxygen permeability of starch???sorbitol films, Carbohydrate Polymers, vol.43, issue.1, pp.33-37, 2000.
DOI : 10.1016/S0144-8617(99)00206-4

S. Gaudin, D. Lourdin, L. Botlan, D. Ilari, J. L. Colonna et al., Plasticisation and Mobility in Starch-Sorbitol Films, Journal of Cereal Science, vol.29, issue.3, pp.273-284, 1999.
DOI : 10.1006/jcrs.1999.0236

Q. Gong, L. Q. Wang, and K. Tu, In situ polymerization of starch with lactic acid in aqueous solution and the microstructure characterization, Carbohydrate Polymers, vol.64, issue.4, pp.501-509, 2006.
DOI : 10.1016/j.carbpol.2005.09.005

H. P. Grace, DISPERSION PHENOMENA IN HIGH VISCOSITY IMMISCIBLE FLUID SYSTEMS AND APPLICATION OF STATIC MIXERS AS DISPERSION DEVICES IN SUCH SYSTEMS, Chemical Engineering Communications, vol.10, issue.3-6, pp.225-277, 1982.
DOI : 10.1002/aic.690150512

G. Sell, C. Hiver, J. Dahoun, A. Souahi, and A. , Video-controlled tensile testing of polymers and metals beyond the necking point, pp.5031-5039, 1992.

E. Helfand and Y. Tagami, Theory of interface between immiscible polymers. -1972, p.3592

E. Helfand and Y. Tagami, Theory of interface between immiscible polymers. -1972, p.1812

E. Helfand and A. M. Sapse, Theory of unsymmetric polymer???polymer interfaces, The Journal of Chemical Physics, vol.15, issue.2, p.1327, 1975.
DOI : 10.1063/1.1730446

Y. T. Hu, D. J. Pine, G. Leal, and L. , Drop deformation, breakup, and coalescence with compatibilizer, Physics of Fluids, vol.25, issue.3, pp.484-489, 2000.
DOI : 10.1122/1.550731

M. A. Huneault and H. Li, Morphology and properties of compatibilized polylactide/thermoplastic starch blends, Polymer, vol.48, issue.1, pp.270-280, 2007.
DOI : 10.1016/j.polymer.2006.11.023

S. H. Hulleman, F. H. Janssen, and H. Feil, the role of water during plascization of native starches, pp.2043-2048, 1998.

A. Imberty, A. Buléon, V. Tran, and S. Péerez, Recent advances in knowlage of starch structure, pp.375-384, 1991.

S. Jacobsen and G. Fritz, Filling of poly(lactic acid) with native starch, Polymer Engineering & Science, vol.34, issue.22, pp.2799-2804, 1996.
DOI : 10.1002/pen.10680

G. M. Jordhamo, J. A. Mansen, and L. H. Sperling, Phase continuity and inversion in polymer blends and simultaneous interpenetrating networks, Polymer Engineering and Science, vol.26, issue.61, p.517, 1986.
DOI : 10.1007/978-94-017-5349-4

T. Ke and X. Sun, Thermal and Mechanical Properties of poly(Lactic Acid) and starch blends with various placticizers, pp.945-953, 2001.

K. Krogars, J. Heinamaki, M. Karjalainen, A. Niskanen, M. Leskela et al., Enhanced stability of rubbery amylose-rich maize starch films plasticized with a combination of sorbitol and glycerol, International Journal of Pharmaceutics, vol.251, issue.1-2, pp.205-208, 2003.
DOI : 10.1016/S0378-5173(02)00585-9

L. Leibler, Block copolymers at interfaces, Physica A: Statistical Mechanics and its Applications, vol.172, issue.1-2, pp.258-268, 1991.
DOI : 10.1016/0378-4371(91)90325-7

L. Leibler, Emulsifying effects of block copolymers in incompatible polymer blends, Makromolekulare Chemie. Macromolecular Symposia, vol.87, issue.1, pp.1-17, 1998.
DOI : 10.1063/1.453369

H. Li and A. Huneault, Comparison of sorbitol and glycerol as plasticizers for thermoplastic starch in TPS/PLA blends, Journal of Applied Polymer Science, vol.05, issue.4, pp.2439-2488, 2011.
DOI : 10.3139/217.2185

H. Li and M. A. Huneault, Effect of nucleation and plasticization on the crystallization of poly(lactic acid), Polymer, vol.48, issue.23, pp.6855-6866, 2007.
DOI : 10.1016/j.polymer.2007.09.020

Z. Q. Liu, X. S. Yi, and Y. Feng, Effects of glycerin and glycerol monstearate on performance of thermoplastic starch, Journal of Materials Science, vol.36, issue.7, pp.1809-1053, 2001.
DOI : 10.1023/A:1017589028611

D. Lourdin, L. Coignard, H. Bizot, and P. Colonna, Infleunce of equilibrium relative humidity and plasticizer concentration on the water content and glass transition of starch materials, pp.5401-5406, 1997.

D. Lourdin, H. Bizot, and P. Colonna, ?Antiplasticization? in starch-glycerol films?, Journal of Applied Polymer Science, vol.63, issue.8, pp.1047-1053, 1997.
DOI : 10.1002/(SICI)1097-4628(19970222)63:8<1047::AID-APP11>3.0.CO;2-3

X. F. Ma and J. G. Yu, the plasticizers contaning amid groups for thermoplastic starch, pp.197-203

R. Mani, J. Tang, and M. Bhattacharya, Synthese and characterization of starch-graft-polycaprolactone as compatibilizer for starch/polycaprolactone blends, Macromolecular Rapid Commmunications, pp.283-286, 1998.

O. Martin and L. Avérous, Poly(lactic acid): plasticization and properties of biodegradable multiphase systems, Polymer, vol.42, issue.14, pp.6209-6219, 2001.
DOI : 10.1016/S0032-3861(01)00086-6

N. Mechbal, Evolution de la morphologie des mélanges de polymères non miscibles en écoulement élongationnel et en ciassaillement, 2008.

W. J. Milliken, H. A. Stone, and L. G. Leal, The effect of surfactant on the transient motion of Newtonian drops, Physics of Fluids A: Fluid Dynamics, vol.14, issue.1, p.69, 1993.
DOI : 10.1016/0021-9797(76)90303-9

P. Myllarinen, R. Partanen, J. Seppala, and P. Forssell, Effect of glycerol on behaviour of amylose and amylopectine films, pp.355-361, 2002.

M. Nizar, Evolution de la morphologies des mélanges de polymères non miscibles en écoulement élongationnel et en cisaillement, 2008.

C. Nouvel, P. Dubois, E. Dellacherie, and J. L. Six, Controlled synthesis of amphilic biodegradable polylactide-grafted dextran copolymers Polymer Science: Part A: Polymer Chemistry, pp.2577-2588

Y. Ohya, S. Maruhashi, and T. Ouchi, Preparation of poly(lactic acid)-grafted amylose through the trimethylsilyl protection method and its biodegradation, Macromolecular Chemistry and Physics, vol.199, issue.9, pp.2017-2022, 1998.
DOI : 10.1002/(SICI)1521-3935(19980901)199:9<2017::AID-MACP2017>3.0.CO;2-9

T. Ouchi, T. Kontani, and Y. Ohya, Modification of polylactide upon physical properties by solutioncast blends from polylactide and polylactide-grafted dextran, pp.3927-3933, 2003.

R. Ouhib, B. Renault, H. Mouaziz, C. Nouvel, E. Dellacherie et al., Biodegradable amyloseg-PLA glycopolymers from renewable resources, pp.32-40, 2009.

M. J. Owen, Physical Properties of polymers Handbook Physics American Institute of, pp.669-676, 1996.

D. K. Owens and R. C. Wendt, Estimation of the surface free energy of polymers, Journal of Applied Polymer Science, vol.13, issue.8, pp.1741-1747, 1969.
DOI : 10.1002/app.1969.070130815

A. Sarko and H. H. Wu, the double helical molecular structure of crystalline B-Amylose, pp.27-40, 1978.

E. Schwach and L. Avérous, Starch-based biodegradable blends: morphology and interface properties, Polymer International, vol.40, issue.12, pp.2115-2124
DOI : 10.1016/S0032-3861(99)00048-8

E. Schwach, J. L. Six, and L. Avérous, Biodegradable Blends Based on Starch and Poly(Lactic Acid): Comparison of Different Strategies and Estimate of Compatibilization, Journal of Polymers and the Environment, vol.37, issue.4, pp.286-297, 1007.
DOI : 10.1081/MC-200029326

O. Sevenou, S. E. Hill, I. A. Farhat, and J. Mitchell, Organisation of the external region of the starch granule as determined by infrared spectroscopy, International Journal of Biological Macromolecules, vol.31, issue.1-3, pp.79-85, 2002.
DOI : 10.1016/S0141-8130(02)00067-3

R. Shi, Z. Zhang, Q. Liu, Y. Han, L. Zhang et al., Characterization of citric acid/glycerol co-plasticized thermoplastic starch prepared by melt blending, Carbohydrate Polymers, vol.69, issue.4, pp.748-755, 2007.
DOI : 10.1016/j.carbpol.2007.02.010

E. Schwach and L. Avérous, Starch-based biodegradable blends: morphology and interface properties, Polymer International, vol.40, issue.12, pp.2115-2124
DOI : 10.1016/S0032-3861(99)00048-8

R. L. Shorgen, Effect of moisture content on the melting and subsequent physical aging of corn starch, pp.83-90, 1992.

H. A. Stone and L. G. Leal, The effects of surfactants on drop deformation and breakup, Journal of Fluid Mechanics, vol.46, issue.-1, pp.161-168, 1990.
DOI : 10.1017/S002211208100116X

X. S. Sun, R. Acioli-moura, and W. Li, Effects of Starch Types on Mechanical Properties of Poly(lactic acid)/Starch Composites, International Polymer Processing XXII. -2007, pp.410-417
DOI : 10.3139/217.2052

U. Sundararaj and C. W. Macosko, Drop Breakup and Coalescence in Polymer Blends: The Effects of Concentration and Compatibilization, Macromolecules, vol.28, issue.8, pp.2647-57, 1995.
DOI : 10.1021/ma00112a009

U. Sundararaj and C. W. Macosko, Drop Breakup and Coalescence in Polymer Blends: The Effects of Concentration and Compatibilization, Macromolecules, vol.28, issue.8, pp.2647-2657, 1995.
DOI : 10.1021/ma00112a009

I. Tan, C. C. Wee, P. A. Sopade, and P. J. Halley, Investigation of the starch gelatinisation phenomena in water???glycerol systems: application of modulated temperature differential scanning calorimetry, Carbohydrate Polymers, vol.58, issue.2, pp.191-204
DOI : 10.1016/j.carbpol.2004.06.038

S. Thomas and A. Coerge, Dynamic mechanical properties of thermoplastic elastomers from blends of polypropylene with copolymers of ethylene with vinyl acetate, European Polymer Journal, vol.28, issue.11, pp.1451-1458, 1992.
DOI : 10.1016/0014-3057(92)90291-9

L. Utracki, Introduction to Polymer Blends Utracki, -1990.-Polymer Alloys and Blends: Thermodynamics and Rheology
DOI : 10.1007/0-306-48244-4_1

L. Utracki, Thermodynamics of Polymer Blends
DOI : 10.1007/0-306-48244-4_2

L. Utracki, Thermodynamics of Polymer Blends Utracki, -1990.-Polymer Blends and Alloys:Thermodynamics and Rheology

L. Utracki and Z. H. Shi, Development of polymer blend morphology during compounding in a twin-screw extruder. Part I: Droplet dispersion and coalescence?a review, Polymer Engineering and Science, vol.33, issue.49, p.824, 1992.
DOI : 10.1002/masy.19910480117

A. Taguet, M. A. Huneault, and B. D. Favis, Interface/morphology relationships in polymer blends with thermoplastic starch, Polymer, vol.50, issue.24, pp.5733-5743, 2009.
DOI : 10.1016/j.polymer.2009.09.055

G. I. Taylor, The Formation of Emulsions in Definable Fields of Flow, Proceedings of the Royal Society of London, pp.501-523, 1934.
DOI : 10.1098/rspa.1934.0169

G. I. Taylor, The Viscosity of a Fluid Containing Small Drops of Another Fluid, Proceedings of the Royal Society of London, pp.41-48, 1932.
DOI : 10.1098/rspa.1932.0169

J. J. Van-soest, H. Tournois, D. Wit, J. Vliegenthart, and F. G. , Short-range stucture in (partially) crystalline potato starch determined with attenuated reflectance Fourier infrared spectroscopy, pp.201-214, 1995.

V. Soest and J. J. , Starch plastics: structure-property relaionship, 1996.

V. Soest, J. J. De-wit, D. Vleigenthart, and J. F. , Mechanical properties of thermoplastic waxy maize starch, Journal of Applied Polymer Science, vol.61, issue.11, pp.1927-1937, 1996.
DOI : 10.1002/(SICI)1097-4628(19960912)61:11<1927::AID-APP7>3.0.CO;2-L

J. J. Van-soest and J. F. Vliegenthart, Crystallinity in starch plastics: consequences for material properties, Trends in Biotechnology, vol.15, issue.6, pp.208-213, 1997.
DOI : 10.1016/S0167-7799(97)01021-4

M. C. Van-der-burgt, M. E. Van-der-woude, and L. P. Janssen, The influence of plasticizer on extruded thermoplastic starch, Journal of Vinyl and Additive Technology, vol.3, issue.2, pp.170-174, 1996.
DOI : 10.1002/vnl.10116

J. Verdu, Vieillissement des plastiques [Ouvrage]. -Paris : Association francaise de normalisation, 1984.

T. A. Waigh, M. J. Gidley, B. U. Komanshek, and A. M. Donald, The phase transition in starch during gelatinization: a liquid crystalline approach, pp.165-176, 2000.

H. Wang, X. Z. Sun, and P. Seib, Effects of starch moisture on properties of wheat starch/poly(lactic acid) blend containing methylenediphenyl diisocyanate, pp.133-138, 2002.

N. Wang, J. Yu, P. R. Chang, and X. Ma, Influence of Citric Acid on the properties of glycerolplasticized dry starch (DTPS) and DTPS/Poly (Lactic acid) blends, pp.409-417, 2007.

R. L. Whistler, J. N. Bemiller, and E. F. Paschall, Molecular Structure of Starch in Starch Chemistry and Thechnology, 1984.

J. A. Radley, Starch and its Derivatives [Ouvrage].-1968.-(Radley

W. T. Winter and A. Sarko, Crystal and molecular structure of V-anhydrouse amylose, pp.1447-1460, 1974.

W. T. Winter and A. Sarko, Crystal and Molecular Structure of V-Anhydrouse Amylose, pp.1447-1460, 1974.

. Wu-chin-san-improving-polylactide, Starch Biocomposites by grafting polylactide with acrylic acid- Characterization and Biodegradability Assessment, pp.352-361, 2005.

S. Wu, Polymer Interface and Adhesion, pp.67-132, 1982.

Y. Yamashita and K. Monobe, Single crystals of amylose V complexes. III. Crystals with 81 helical configuration, Journal of Polymer Science Part A-2: Polymer Physics, vol.9, issue.8, pp.1471-1481, 1971.
DOI : 10.1002/pol.1971.160090807

Y. Jiugao, . Wang, . Ning, and . Ma, Xiaofei The effects of c itric acid on the properties of thermoplastiqc starch plasticized by Glycerol, pp.494-504, 2005.

L. Yu and G. Christie, Microstructure and mechanical properties of orientated thermoplastic starches, Journal of Materials Science, vol.40, issue.1, pp.111-116, 2005.
DOI : 10.1007/s10853-005-5694-1

M. Zhai, F. Yoshii, T. Kume, and K. Hashim, Syntheses of PVA/starch grafted hydrogels by irradiation, Carbohydrate Polymers, vol.50, issue.3, pp.295-303, 2002.
DOI : 10.1016/S0144-8617(02)00031-0

J. F. Zhang and X. Sun, Mechanical properties of poly(lactic acid) /starch composites compatibilizied by maleic anhydride, pp.1446-1451

J. F. Zhang and X. Sun, Physical Characterization of Coupled Poly(lactic acid)/Starch/Maleic Anhydride Blends Plasticized by Acetyl Triethyl Citrate, Macromolecular Bioscience, vol.33, issue.11, pp.1053-1060
DOI : 10.1002/mabi.200400076

H. F. Zobel, A. D. French, and M. E. Hinckle, X-Ray diffraction of oriented amylose fibers. II. Structure of V amyloses, Biopolymers, vol.2, issue.9, pp.837-845, 1967.
DOI : 10.1002/pol.1964.110021201