S. Shafiee and E. , When will fossil fuel reserves be diminished?, Energy Policy, vol.37, issue.1, pp.181-189, 2009.
DOI : 10.1016/j.enpol.2008.08.016

F. T. Bacon, The High Pressure Hydrogen-Oxygen Fuel Cell, Industrial & Engineering Chemistry, vol.52, issue.4, pp.301-303, 1960.
DOI : 10.1021/ie50604a027

E. Peyrelade, Elaborations et caractérisations électrochimiques et physiques de matériaux d'anode de PEMFC peu sensibles à l'empoisonnement au CO : étude d'alliages et de composites à base de platine-molybdène et de platine-tungstène, Thèse, 2005.

R. Othman, A. L. Dicks, and Z. H. Zhu, Non precious metal catalysts for the PEM fuel cell cathode, International Journal of Hydrogen Energy, vol.37, issue.1, pp.357-372, 2012.
DOI : 10.1016/j.ijhydene.2011.08.095

S. Lister and G. Mclean, PEM fuel cell electrodes, Journal of Power Sources, vol.130, issue.1-2, pp.61-76, 2004.
DOI : 10.1016/j.jpowsour.2003.12.055

V. M. Vishnyakov, Proton exchange membrane fuel cells, Vacuum, vol.80, issue.10, pp.1053-1065, 2006.
DOI : 10.1016/j.vacuum.2006.03.029

H. Tawfik, Y. Hung, and D. Mahajan, Metal bipolar plates for PEM fuel cell???A review, Journal of Power Sources, vol.163, issue.2, pp.755-767, 2007.
DOI : 10.1016/j.jpowsour.2006.09.088

A. Heinzel, F. Mahlendorf, and C. Jansen, Bipolar plates. s.l, 2009.

G. Wu, R. Swaidan, D. Li, and N. Li, Enhanced methanol electro-oxidation activity of PtRu catalysts supported on heteroatom-doped carbon, Electrochimica Acta, vol.53, issue.26, pp.7622-7629, 2008.
DOI : 10.1016/j.electacta.2008.03.082

K. Wikander, H. Ekström, A. E. Palmqvist, and G. Lindbergh, On the influence of Pt particle size on the PEMFC cathode performance, Electrochimica Acta, vol.52, issue.24, pp.6848-6855, 2007.
DOI : 10.1016/j.electacta.2007.04.106

A. Guha, W. Lu, T. A. Zawodzinski-jr, and D. A. Schiraldi, Surface-modified carbons as platinum catalyst support for PEM fuel cells, Carbon, vol.45, issue.7, pp.1506-1517, 2007.
DOI : 10.1016/j.carbon.2007.03.023

S. Y. Cha and W. M. Lee, Performance of Proton Exchange Membrane Fuel Cell Electrodes Prepared by Direct Deposition of Ultrathin Platinum on the Membrane Surface, Journal of The Electrochemical Society, vol.146, issue.11, pp.4055-4060, 1999.
DOI : 10.1149/1.1392591

J. H. Wee, Fabrication methods for low-Pt-loading electrocatalysts in proton exchange membrane fuel cell systems, Journal of Power Sources, vol.165, issue.2, pp.667-677, 2007.
DOI : 10.1016/j.jpowsour.2006.12.051

H. Kim, N. P. Subramanian, and B. N. Popov, Preparation of PEM fuel cell electrodes using pulse electrodeposition, Journal of Power Sources, vol.138, issue.1-2, pp.14-24, 2004.
DOI : 10.1016/j.jpowsour.2004.06.012

W. Vogel, J. Lundquist, P. N. Ross-jr, and P. Stonehart, Reaction pathways and poisons???II, Electrochimica Acta, vol.20, issue.1, p.79, 1975.
DOI : 10.1016/0013-4686(75)85048-1

E. Yeager, Electrocatalysts for O2 reduction, Electrochimica Acta, vol.29, issue.11, pp.1527-1537, 1984.
DOI : 10.1016/0013-4686(84)85006-9

N. M. Markovic and P. N. Ross, Electrocatalysts by design: from the tailored surface to a commercial catalyst, Electrochimica Acta, vol.45, issue.25-26, p.4101, 2000.
DOI : 10.1016/S0013-4686(00)00526-0

B. Hayden, Single-Crystal Surfaces as Model Platinum-Based Hydrogen Fuel Cell Electrocatalysts
DOI : 10.1201/9780203912713.ch5

C. G. Savinova, A. Vayenas, and . Wieckowski, Catalysis and Electrocatalysis at Nanoparticules Surfaces, New York : M. Dekker Inc, 2003.

B. M. Rush, J. A. Reimer, and E. J. Cairns, Nuclear Magnetic Resonance and Voltammetry Studies of Carbon Monoxide Adsorption and Oxidation on a Carbon-Supported Platinum Fuel Cell Electrocatalyst, Journal of The Electrochemical Society, vol.122, issue.2, p.137, 2001.
DOI : 10.1021/ja9922274

M. Watanabe, K. Tsurumi, T. Mizukami, T. Nakamura, and P. Stonehart, Activity and Stability of Ordered and Disordered Co-Pt Alloys for Phosphoric Acid Fuel Cells, Journal of The Electrochemical Society, vol.141, issue.10, pp.2659-2668, 1994.
DOI : 10.1149/1.2059162

E. Guilminot, A. Corcella, F. Charlot, M. Maillard, and . Chatenet, Detection of Pt[sup z+] Ions and Pt Nanoparticles Inside the Membrane of a Used PEMFC, Journal of The Electrochemical Society, vol.589, issue.1, pp.96-105, 2007.
DOI : 10.1021/jp981030f

J. Xie, D. L. Wood, D. M. Wayne, T. A. Zawodzinski, P. Atassanov et al., Durability of PEFCs at High Humidity Conditions, Journal of The Electrochemical Society, vol.150, issue.1, pp.104-113, 2005.
DOI : 10.1149/1.1830355

T. Toda, H. Igarachi, H. Uchida, and M. Watanabe, Enhancement of the Electroreduction of Oxygen on Pt Alloys with Fe, Ni, and Co, Journal of The Electrochemical Society, vol.146, issue.10, pp.3750-3756, 1999.
DOI : 10.1149/1.1392544

V. R. Stamenkovic, B. S. Mun, K. J. Mayrhofer, P. N. Ross, and N. M. Markovic, Effect of Surface Composition on Electronic Structure, Stability, and Electrocatalytic Properties of Pt-Transition Metal Alloys:?? Pt-Skin versus Pt-Skeleton Surfaces, Journal of the American Chemical Society, vol.128, issue.27, pp.8813-8819, 2006.
DOI : 10.1021/ja0600476

A. K. Niessen, A. R. Miedema, F. R. De-boer, and R. Boom, Enthalpies of formation of liquid and solid binary alloys based on 3d metals, Physica B+C, vol.151, issue.3, pp.401-432, 1988.
DOI : 10.1016/0378-4363(88)90296-3

G. E. Ramirez-caballero, Y. Ma, R. Callejas-tovar, and P. B. Balbuena, Surface segregation and stability of core???shell alloy catalysts for oxygen reduction in acid medium, Physical Chemistry Chemical Physics, vol.603, issue.555, pp.2209-2218, 2010.
DOI : 10.1103/PhysRevB.53.10344

F. Maillard, L. Dubau, J. Durst, M. Chatenet, J. Andre et al., Durability of Pt3Co/C nanoparticles in a proton-exchange membrane fuel cell: Direct evidence of bulk Co segregation to the surface, Electrochemistry Communications, vol.12, issue.9, pp.1161-1164, 2010.
DOI : 10.1016/j.elecom.2010.06.007

M. Gotz and H. Wendt, Binary and ternary anode catalyst formulations including the elements W, Sn and Mo for PEMFCs operated on methanol or reformate gas, Electrochimica Acta, vol.43, issue.24, p.3637, 1998.
DOI : 10.1016/S0013-4686(98)00121-2

D. C. Papageorgopoulos, M. Keijzer, and F. A. De-bruijn, The inclusion of Mo, Nb and Ta in Pt and PtRu carbon supported electrocatalysts in the quest for improved CO tolerant PEMFC anodes, Electrochimica Acta, vol.48, issue.2, pp.197-204, 2002.
DOI : 10.1016/S0013-4686(02)00602-3

G. Tamizhmani and G. A. Cuapuano, Life Tests of Carbon-Supported Pt-Cr-Cu Electrocatalysts in Solid-Polymer Fuel Cells, Journal of The Electrochemical Society, vol.141, issue.9, p.132, 1994.
DOI : 10.1149/1.2055179

J. Shim, D. K. Yoo, and J. S. Lee, Characteristics for electrocatalytic properties and hydrogen???oxygen adsorption of platinum ternary alloy catalysts in polymer electrolyte fuel cell, Electrochimica Acta, vol.45, issue.12, pp.1943-1951, 2000.
DOI : 10.1016/S0013-4686(99)00414-4

A. Seo, J. Lee, K. Han, and K. Kim, Performance and stability of Pt-based ternary alloy catalysts for PEMFC, Electrochimica Acta, vol.52, issue.4, pp.1603-1611, 2006.
DOI : 10.1016/j.electacta.2006.03.097

A. J. Appleby and F. R. Foulkes, Fuel Cell handbook. s.l, pp.398-399, 1989.

R. Jasinki, A New Fuel Cell Cathode Catalyst, Nature, vol.137, issue.4925, pp.1212-1213, 1964.
DOI : 10.1039/jr9380001761

H. Alt, H. Binder, and G. Sandstede, Mechanism of the electrocatalytic reduction of oxygen on metal chelates*1, Journal of Catalysis, vol.28, issue.1, pp.8-19, 1973.
DOI : 10.1016/0021-9517(73)90173-5

E. Antolini and E. R. Gonzalez, Tungsten-based materials for fuel cell applications, Applied Catalysis B: Environmental, vol.96, issue.3-4, pp.245-266, 2010.
DOI : 10.1016/j.apcatb.2010.02.039

J. M. Emsley, The Elements, 1991.

L. H. Bennett, J. R. Cuthill, A. J. Mcalister, N. E. Erickson, and R. E. Watson, Electronic and catalytic properties of tungsten carbide, Science, vol.187, issue.4179, pp.858-859, 1975.
DOI : 10.1126/science.1114333

R. V. Sara, Phase Equilibria in the System Tungsten-Carbon, Journal of the American Ceramic Society, vol.73, issue.10, pp.251-257, 1965.
DOI : 10.1016/0022-5088(63)90012-2

G. A. Tsirlina and O. A. Petrii, Role of carbon deficiency and anodic activation in the electrochemistry of carbide materials, Electrochimica Acta, vol.32, issue.4, pp.637-647, 1987.
DOI : 10.1016/0013-4686(87)87055-X

K. M. Andersson and L. Bergström, Oxidation and dissolution of tungsten carbide powder in water, International Journal of Refractory Metals and Hard Materials, vol.18, issue.2-3, pp.121-129, 2000.
DOI : 10.1016/S0263-4368(00)00010-X

I. Nikolov, V. Nikolova, T. Vitanov, and M. Svata, The effect of method of preparation on the catalytic activity of tungsten carbide, Journal of Power Sources, vol.4, issue.1, pp.65-75, 1979.
DOI : 10.1016/0378-7753(79)80038-5

H. Binder, A. Köhling, W. Kuhn, W. Lindner, and G. Sandstede, Tungsten Carbide Electrodes for Fuel Cells with Acid Electrolyte, Nature, vol.265, issue.5226, pp.1299-1300, 1969.
DOI : 10.1038/2241299b0

P. N. Ross and P. Stonehart, The relation of surface structure to the electrocatalytic activity of tungsten carbide, Journal of Catalysis, vol.48, issue.1-3, pp.42-59, 1977.
DOI : 10.1016/0021-9517(77)90076-8

M. B. Zellner and J. G. Chen, Surface science and electrochemical studies of WC and W2C PVD films as potential electrocatalysts, Catalysis Today, vol.99, issue.3-4, pp.299-307, 2005.
DOI : 10.1016/j.cattod.2004.10.004

I. Nikolov and T. Vitanov, The effect of method of preparation on the corrosion resistance and catalytic activity during corrosion of tungsten carbide I. Corrosion resistance of tungsten carbide in sulfuric acid, Journal of Power Sources, vol.5, issue.3, pp.273-281, 1980.
DOI : 10.1016/0378-7753(80)80006-1

X. G. Yang and C. Y. Wang, Nanostructured tungsten carbide catalysts for polymer electrolyte fuel cells, Applied Physics Letters, vol.86, issue.22, pp.224104-224112, 2005.
DOI : 10.1016/0965-9773(95)00265-G

C. D. Brady, E. J. Rees, and G. T. Burstein, Electrocatalysis by nanocrystalline tungsten carbides and the effects of codeposited silver, Journal of Power Sources, vol.179, issue.1, pp.17-26, 2008.
DOI : 10.1016/j.jpowsour.2008.01.002

E. J. Rees, K. Essaki, C. D. Brady, and G. T. Burstein, Hydrogen electrocatalysts from microwave-synthesised nanoparticulate carbides, Journal of Power Sources, vol.188, issue.1, pp.75-81, 2009.
DOI : 10.1016/j.jpowsour.2008.11.074

M. Nagai, M. Yoshida, and H. Tominaga, Tungsten and nickel tungsten carbides as anode electrocatalysts, Electrochimica Acta, vol.52, issue.17, pp.5430-5436, 2007.
DOI : 10.1016/j.electacta.2007.02.065

S. Izhar, M. Yoshida, and M. Nagai, Characterization and performances of cobalt???tungsten and molybdenum???tungsten carbides as anode catalyst for PEFC, Electrochimica Acta, vol.54, issue.4, pp.1255-1262, 2009.
DOI : 10.1016/j.electacta.2008.08.049

K. Lee, A. Ishihara, S. Mitsushima, N. Kamiya, and K. Ota, Stability and electrocatalytic activity for oxygen reduction in WC + Ta catalyst, Electrochimica Acta, vol.49, issue.21, pp.3479-3485, 2004.
DOI : 10.1016/j.electacta.2004.03.018

H. Zhong, H. Zhang, Y. Liang, J. Zhang, M. Wang et al., A novel non-noble electrocatalyst for oxygen reduction in proton exchange membrane fuel cells, Journal of Power Sources, vol.164, issue.2, pp.572-577, 2007.
DOI : 10.1016/j.jpowsour.2006.11.080

P. Shen, A. C. Tseung, and K. Chen, electrodes. Part 1.???Methanol oxidation and in situ FTIR studies, J. Chem. Soc., Faraday Trans., vol.114, issue.20, pp.3089-3096, 1994.
DOI : 10.1149/1.2426775

URL : https://hal.archives-ouvertes.fr/hal-00552360

F. Maillard, E. Peyrelade, M. Soldo-olivier, E. Chatenet, R. Chaînet et al., Is carbon-supported Pt-WOx composite a CO-tolerant material?, Electrochimica Acta, vol.52, issue.5, pp.1958-1967, 2007.
DOI : 10.1016/j.electacta.2006.08.024

URL : https://hal.archives-ouvertes.fr/hal-00333728

J. Shim, C. Lee, H. Lee, and E. J. Cairns, Electrochemical characteristics of Pt???WO3/C and Pt???TiO2/C electrocatalysts in a polymer electrolyte fuel cell, Journal of Power Sources, vol.102, issue.1-2, pp.172-177, 2001.
DOI : 10.1016/S0378-7753(01)00817-5

L. G. Pereira, F. R. Santos, M. E. Pereira, and V. A. Paganin, CO tolerance effects of tungsten-based PEMFC anodes, Electrochimica Acta, vol.51, issue.19, pp.4061-4066, 2006.
DOI : 10.1016/j.electacta.2005.11.025

D. B. Sepa, A. Damjanovic, J. O-'m, and . Bocris, Sodium tungsten bronzes as electrodes for oxygxen reduction, Electrochimica Acta, vol.12, issue.6, pp.746-747, 1967.
DOI : 10.1016/0013-4686(67)85044-8

J. Mchardy, J. O-'m, and . Bockris, Electrocatalysis of Oxygen Reduction by Sodium Tungsten Bronze, Journal of The Electrochemical Society, vol.120, issue.1, pp.53-60, 1973.
DOI : 10.1149/1.2403398

L. G. Santos, K. S. Freitas, and E. A. Ticianelli, Electrocatalysis of oxygen reduction and hydrogen oxidation in platinum dispersed on tungsten carbide in acid medium, Journal of Solid State Electrochemistry, vol.30, issue.11, pp.1541-1548, 2007.
DOI : 10.1007/978-3-642-46155-2

H. Meng and P. K. Shen, Tungsten Carbide Nanocrystal Promoted Pt/C Electrocatalysts for Oxygen Reduction, The Journal of Physical Chemistry B, vol.109, issue.48, pp.22705-22709, 2005.
DOI : 10.1021/jp054523a

T. He, E. Kreidler, L. Xiong, J. Luo, and C. J. Zhong, Alloy Electrocatalysts, Journal of The Electrochemical Society, vol.18, issue.9, pp.1637-1643, 2006.
DOI : 10.1149/1.2096016

L. Xiong and T. He, Synthesis and characterization of carbon supported PtW catalysts from carbonyl complexes for oxygen electroreduction, Electrochemistry Communications, vol.8, issue.10, pp.1671-1676, 2006.
DOI : 10.1016/j.elecom.2006.07.044

X. Yu and S. Ye, Recent advances in activity and durability enhancement of Pt/C catalytic cathode in PEMFC, Journal of Power Sources, vol.172, issue.1, pp.145-154, 2007.
DOI : 10.1016/j.jpowsour.2007.07.048

E. Antolini, Carbon supports for low-temperature fuel cell catalysts, Applied Catalysis B: Environmental, vol.88, issue.1-2, pp.1-24, 2009.
DOI : 10.1016/j.apcatb.2008.09.030

M. Kim, J. Park, H. Kim, S. Song, and W. Lee, The preparation of Pt/C catalysts using various carbon materials for the cathode of PEMFC, Journal of Power Sources, vol.163, issue.1, pp.93-97, 2006.
DOI : 10.1016/j.jpowsour.2006.05.057

F. J. Derbyshire, V. H. De-beer, G. M. Abotsi, A. W. Scaroni, J. M. Solar et al., The influence of surface functionality on the activity of carbon-supported catalysts, Applied Catalysis, vol.27, issue.1, pp.117-131, 1986.
DOI : 10.1016/S0166-9834(00)81051-9

M. A. Montes-morán, D. Suárez, J. A. Menéndez, and E. Fuente, On the nature of basic sites on carbon surfaces: an overview, Carbon, vol.42, issue.7, pp.1219-1225, 2004.
DOI : 10.1016/j.carbon.2004.01.023

A. Guerrero-ruiz, P. Badenes, and I. Rodrigo-ramos, Study of some factors affecting the Ru and Pt dispersions over high surface area graphite-supported catalysts, Applied Catalysis A: General, vol.173, issue.2, pp.313-321, 1998.
DOI : 10.1016/S0926-860X(98)00187-2

S. Kim and S. Park, Effects of chemical treatment of carbon supports on electrochemical behaviors for platinum catalysts of fuel cells, Journal of Power Sources, vol.159, issue.1, pp.42-45, 2006.
DOI : 10.1016/j.jpowsour.2006.04.041

S. Kim and S. Park, Effect of acid/base treatment to carbon blacks on preparation of carbon-supported platinum nanoclusters, Electrochimica Acta, vol.52, issue.9, pp.3013-3021, 2007.
DOI : 10.1016/j.electacta.2006.09.060

M. Uchida, Y. Aoyama, M. Tanabe, N. Yanagihara, N. Eda et al., Influences of Both Carbon Supports and Heat-Treatment of Supported Catalyst on Electrochemical Oxidation of Methanol, Journal of The Electrochemical Society, vol.142, issue.8, pp.2572-2576, 1995.
DOI : 10.1149/1.2050055

J. Wang, G. Yin, Y. Shao, S. Zhang, Z. Wang et al., Effect of carbon black support corrosion on the durability of Pt/C catalyst, Journal of Power Sources, vol.171, issue.2, pp.331-339, 2007.
DOI : 10.1016/j.jpowsour.2007.06.084

D. A. Stevens and J. R. Dahn, Thermal degradation of the support in carbon-supported platinum electrocatalysts for PEM fuel cells, Carbon, vol.43, issue.1, pp.179-188, 2005.
DOI : 10.1016/j.carbon.2004.09.004

Y. Takasu, T. Kawaguchi, W. Sugimoto, and Y. Murakami, Effects of the surface area of carbon support on the characteristics of highly-dispersed Pt???Ru particles as catalysts for methanol oxidation, Electrochimica Acta, vol.48, issue.25-26, pp.3861-3868, 2003.
DOI : 10.1016/S0013-4686(03)00521-8

F. Su, X. Li, L. Lv, and X. S. Zhao, Ordered mesoporous carbon particles covered with carbon nanotubes, Carbon, vol.44, issue.4, pp.801-803, 2006.
DOI : 10.1016/j.carbon.2005.10.056

J. Ozaki, N. Endo, W. Ohizumi, K. Igarashi, N. Nakahara et al., Novel preparation method for the production of mesoporous carbon fiber from a polymer blend, Carbon, vol.35, issue.7, pp.1031-1033, 1997.
DOI : 10.1016/S0008-6223(97)89878-8

R. W. Pekala, Organic aerogels from the polycondensation of resorcinol with formaldehyde, Journal of Materials Science, vol.11, issue.11, pp.3221-3227, 1989.
DOI : 10.1007/BF01139044

C. Liang, Z. Li, and S. Dai, Mesoporous Carbon Materials: Synthesis and Modification, Angewandte Chemie International Edition, vol.19, issue.20, pp.3696-3717, 2008.
DOI : 10.1093/chromsci/29.4.147

P. M. Barata-rodrigues, T. J. Mays, and G. D. Moggridge, Structured carbon adsorbents from clay, zeolite and mesoporous aluminosilicate templates, Carbon, vol.41, issue.12, pp.2231-2246, 2003.
DOI : 10.1016/S0008-6223(03)00252-5

S. J. Han, K. Sohn, and T. Hyeon, Fabrication of New Nanoporous Carbons through Silica Templates and Their Application to the Adsorption of Bulky Dyes, Chemistry of Materials, vol.12, issue.11, pp.3337-3341, 2000.
DOI : 10.1021/cm000106t

J. Lee, K. Sohn, and T. Hyeon, Fabrication of Novel Mesocellular Carbon Foams with Uniform Ultralarge Mesopores, Journal of the American Chemical Society, vol.123, issue.21, pp.5146-5147, 2001.
DOI : 10.1021/ja015510n

A. H. Lu and F. Schüth, Nanocasting: A Versatile Strategy for Creating Nanostructured Porous Materials, Advanced Materials, vol.126, issue.14, pp.1793-1805, 2006.
DOI : 10.1002/adma.200600148

S. Jun, S. H. Joo, R. Ryoo, M. Kruk, M. Jaroniec et al., Synthesis of New, Nanoporous Carbon with Hexagonally Ordered Mesostructure, Journal of the American Chemical Society, vol.122, issue.43, pp.10712-10713, 2000.
DOI : 10.1021/ja002261e

L. Calvillo, M. J. Lázaro, E. García-bordejé, R. Moliner, P. L. Cabot et al., Platinum supported on functionalized ordered mesoporous carbon as electrocatalyst for direct methanol fuel cells, Journal of Power Sources, vol.169, issue.1, pp.59-64, 2007.
DOI : 10.1016/j.jpowsour.2007.01.042

J. S. Choi, W. S. Chung, H. Y. Ha, T. Lim, I. Oh et al., Nano-structured Pt???Cr anode catalyst over carbon support, for direct methanol fuel cell, Journal of Power Sources, vol.156, issue.2, pp.466-471, 2006.
DOI : 10.1016/j.jpowsour.2005.05.075

A. B. Fuentes and S. Alvarez, Graphitic mesoporous carbons synthesised through mesostructured silica templates, Carbon, vol.42, issue.15, pp.3049-3055, 2004.
DOI : 10.1016/j.carbon.2004.06.020

L. Wang, S. Lin, K. Lin, C. Yin, D. Liang et al., A facile synthesis of highly ordered mesoporous carbon monolith with mechanically stable mesostructure and superior conductivity from SBA-15 powder, Microporous and Mesoporous Materials, vol.85, issue.1-2, pp.136-142, 2005.
DOI : 10.1016/j.micromeso.2005.06.005

P. Delhaès, J. P. Issi, S. Bonnamy, and P. Launois, Polymorphism and Structure of Carbons, Lecture Notes in Physics, vol.677, pp.1-47, 2006.
DOI : 10.1007/3-540-37586-4_1

M. S. Dresselhaus and P. Avouris, Introduction to Carbon Materials Research. Carbon nanotubes, Topics in Applied Physics, pp.1-9, 2001.

R. Saito, M. Fugita, and G. Dresselhaus, Electronic structure of chiral graphene tubules, Applied Physics Letters, vol.247, issue.18, pp.2204-2206, 1992.
DOI : 10.1103/PhysRevLett.68.631

M. Carmo, V. Paganin, J. Rosolen, and R. Gonzalez, Alternative supports for the preparation of catalysts for low-temperature fuel cells: the use of carbon nanotubes, Journal of Power Sources, vol.142, issue.1-2, pp.169-176, 2005.
DOI : 10.1016/j.jpowsour.2004.10.023

J. L. Figueiredo and P. Serp, Carbon Materials for catalysis, p.326, 2009.

T. W. Ebbesen and P. M. Ajayan, Large-scale synthesis of carbon nanotubes, Nature, vol.358, issue.6383, p.220, 1992.
DOI : 10.1038/358220a0

H. Dai, G. Dresselhaus, P. Avouris, and M. S. Dresselhaus, Carbon nanotubes: Synthesis, Structure, Properties and Application, p.29, 2001.

C. Kim, Y. J. Kim, Y. A. Kim, T. Yanagisawa, K. C. Park et al., High performance of cup-stacked-type carbon nanotubes as a Pt???Ru catalyst support for fuel cell applications, Journal of Applied Physics, vol.18, issue.10, pp.5903-5905, 2004.
DOI : 10.1021/jp012707t

J. Prabhuram, T. S. Zhao, Z. K. Tang, R. Chen, and Z. X. Liang, Multiwalled Carbon Nanotube Supported PtRu for the Anode of Direct Methanol Fuel Cells, The Journal of Physical Chemistry B, vol.110, issue.11, pp.5245-5252, 2006.
DOI : 10.1021/jp0567063

C. K. Poh, S. H. Lim, H. Pan, J. Lin, and J. Y. Lee, Citric acid functionalized carbon materials for fuel cell applications, Journal of Power Sources, vol.176, issue.1, pp.70-75, 2008.
DOI : 10.1016/j.jpowsour.2007.10.049

Y. Xing, Synthesis and Electrochemical Characterization of Uniformly-Dispersed High Loading Pt Nanoparticles on Sonochemically-Treated Carbon Nanotubes, The Journal of Physical Chemistry B, vol.108, issue.50, p.19255, 2004.
DOI : 10.1021/jp046697i

M. S. Saha, R. Li, and X. Sun, High loading and monodispersed Pt nanoparticles on multiwalled carbon nanotubes for high performance proton exchange membrane fuel cells, Journal of Power Sources, vol.177, issue.2, pp.314-322, 2008.
DOI : 10.1016/j.jpowsour.2007.11.036

T. Maiyalagan, B. Viswanathan, and U. V. Varadaraju, Nitrogen containing carbon nanotubes as supports for Pt ??? Alternate anodes for fuel cell applications, Electrochemistry Communications, vol.7, issue.9, pp.905-912, 2005.
DOI : 10.1016/j.elecom.2005.07.007

T. Maiyalagan, Synthesis and electro-catalytic activity of methanol oxidation on nitrogen containing carbon nanotubes supported Pt electrodes, Applied Catalysis B: Environmental, vol.80, issue.3-4, p.286, 2008.
DOI : 10.1016/j.apcatb.2007.11.033

G. Wu and B. Q. Xu, Carbon nanotube supported Pt electrodes for methanol oxidation: A comparison between multi- and single-walled carbon nanotubes, Journal of Power Sources, vol.174, issue.1, pp.148-158, 2007.
DOI : 10.1016/j.jpowsour.2007.08.024

C. Wang, M. Waje, X. Wang, J. M. Tang, R. C. Haddon et al., Proton Exchange Membrane Fuel Cells with Carbon Nanotube Based Electrodes, Nano Letters, vol.4, issue.2, pp.345-348, 2004.
DOI : 10.1021/nl034952p

E. Bekyarova, M. E. Itkis, N. Cabrera, B. Zhao, A. Yu et al., Electronic Properties of Single-Walled Carbon Nanotube Networks, Journal of the American Chemical Society, vol.127, issue.16, pp.5990-5995, 2005.
DOI : 10.1021/ja043153l

E. Yoo, T. Okada, T. Kizuka, and J. Nakamura, Effect of carbon substrate materials as a Pt???Ru catalyst support on the performance of direct methanol fuel cells, Journal of Power Sources, vol.180, issue.1, pp.221-226, 2008.
DOI : 10.1016/j.jpowsour.2008.01.065

J. Pielaszek, B. Mierzwa, G. Medjadhi, J. F. Marêché, S. Puricelli et al., Molybdenum carbide catalyst formation from precursors deposited on active carbons: XRD studies, Applied Catalysis A: General, vol.296, issue.2, pp.232-237, 2005.
DOI : 10.1016/j.apcata.2005.08.026

M. S. Dresselhaus and G. Dresselhaus, Advances in Physics, pp.1-186, 2002.

S. F. Mckay, Expansion of Annealed Pyrolytic Graphite, Journal of Applied Physics, vol.35, issue.6, pp.1992-1994, 1964.
DOI : 10.1002/zaac.19322060409

D. D. Chung, Exfoliation of graphite, Journal of Materials Science, vol.7, issue.12, pp.4190-4198, 1987.
DOI : 10.1103/PhysRevB.25.4167

I. M. Afanasov, D. V. Savchenko, S. G. Ionov, D. A. Rusakov, A. N. Seleznev et al., Thermal conductivity and mechanical properties of expanded graphite, Inorganic Materials, vol.45, issue.3, pp.486-490, 2009.
DOI : 10.1134/S0020168509050057

|. Papyex® and . Mersen, Site Web Mersen. [En ligne] http://www.mersen.com/produits/details/f/solutions-et-materiaux-avances-pour-hautestemperatures/composants-et-materiaux-detancheite/graphite-souple

H. Mellottée, Techniques de l'Ingénieur Traité des Matériaux métalliques, M580, pp.1-20, 1991.

S. Bertarione, F. Bonino, F. Cesano, A. Damin, D. Scarano et al., Furfuryl Alcohol Polymerization in H???Y Confined Spaces:?? Reaction Mechanism and Structure of Carbocationic Intermediates, The Journal of Physical Chemistry B, vol.112, issue.9, pp.2580-2589
DOI : 10.1021/jp073958q

J. F. Marêché, D. Bégin, G. Furdin, S. Puricelli, J. Pajak et al., Monolithic activated carbons from resin impregnated expanded graphite, Carbon, vol.39, issue.5, pp.771-785, 2001.
DOI : 10.1016/S0008-6223(00)00292-X

A. Celzard, M. Krzesiñska, D. Bégin, J. F. Marêché, and S. Puricelli, Preparation, electrical and elastic properties of new anisotropic expanded graphite-based composites, Carbon, vol.40, issue.4, pp.557-566, 2002.
DOI : 10.1016/S0008-6223(01)00140-3

P. and L. Cloirec, Les composés volatils (C.O.V.) dans l'environnement. s.l, 1998.

S. J. Gregg and K. S. Sing, Adsorption, Surface Area and Microporosity, p.4, 1982.

S. Brunauer, P. H. Emmet, and E. Teller, Adsorption of Gases in Multimolecular Layers, Journal of the American Chemical Society, vol.60, issue.2, pp.309-319, 1938.
DOI : 10.1021/ja01269a023

W. Li, C. Liang, W. Zhou, J. Qiu, Z. Zhou et al., Preparation and Characterization of Multiwalled Carbon Nanotube-Supported Platinum for Cathode Catalysts of Direct Methanol Fuel Cells, The Journal of Physical Chemistry B, vol.107, issue.26, pp.6292-6299, 2003.
DOI : 10.1021/jp022505c

A. Celzard, J. F. Marêché, G. Furdin, V. Fierro, C. Sayag et al., Preparation and catalytic activity of active carbon-supported Mo2C nanoparticles, Green Chemistry, vol.17, issue.11, pp.784-794, 2005.
DOI : 10.1039/b507971c

S. Cahen, G. Furdin, J. F. Marêché, and A. Albiniak, Synthesis and characterization of carbon-supported nanoparticles for catalytic applications, Carbon, vol.46, issue.3, pp.511-517, 2008.
DOI : 10.1016/j.carbon.2007.12.017

A. Guha, W. Lu, T. A. Zawodzinski-jr, and D. A. Schiraldi, Surface-modified carbons as platinum catalyst support for PEM fuel cells, Carbon, vol.45, issue.7, pp.1506-1517, 2007.
DOI : 10.1016/j.carbon.2007.03.023

J. Y. Tilquin, R. Côté, G. Veilleux, D. Guay, J. P. Dodelet et al., Preparation and chemical reduction of Pt(IV) chloride-GICS: Supported Pt vs Pt inclusion graphite compounds, Carbon, vol.33, issue.9, pp.1265-1278, 1994.
DOI : 10.1016/0008-6223(95)00073-M

A. Guinier, Théories et techniques de la radiocristallographie. 2nde édition, p.498, 1956.

J. A. Butler, Studies in heterogeneous equilibria. Part II.???The kinetic interpretation of the nernst theory of electromotive force, Trans. Faraday Soc., vol.19, issue.March, pp.729-733, 1924.
DOI : 10.1039/TF9241900729

F. Lapicque, Kinetics of oxygen electrode reduction on platinum: a literature survey oriented towards proton exchange membrane fuel cells, 2010.

S. Puricelli, Elaboration, caractérisation et études des propriétés catalytiques de matériaux carbonés poreux et fonctionnalisés par du molybdène, Thèse, 2005.

S. Cahen, G. Furdin, J. F. Marêché, and A. Albiniak, Synthesis and characterization of carbon-supported nanoparticles for catalytic applications, Carbon, vol.46, issue.3, pp.511-517, 2008.
DOI : 10.1016/j.carbon.2007.12.017

E. Stumpp, The intercalation of metal chlorides and bromides into graphite, Materials Science and Engineering, vol.31, pp.53-59, 1977.
DOI : 10.1016/0025-5416(77)90011-8

J. M. Giraudon, P. Devassine, J. F. Lamonier, L. Delannoy, L. Leclercq et al., Synthesis of Tungsten Carbides by Temperature-Programmed Reaction with CH4???H2 Mixtures. Influence of the CH4 and Hydrogen Content in the Carburizing Mixture, Journal of Solid State Chemistry, vol.154, issue.2, pp.412-426, 2000.
DOI : 10.1006/jssc.2000.8859

J. Y. Tilquin, R. Côté, G. Veilleux, D. Guay, J. P. Dodelet et al., Preparation and chemical reduction of Pt(IV) chloride-GICS: Supported Pt vs Pt inclusion graphite compounds, Carbon, vol.33, issue.9, pp.1265-1278, 1994.
DOI : 10.1016/0008-6223(95)00073-M

S. Izhar, M. Yoshida, and M. Nagai, Characterization and performances of cobalt???tungsten and molybdenum???tungsten carbides as anode catalyst for PEFC, Electrochimica Acta, vol.54, issue.4, pp.1255-1262, 2009.
DOI : 10.1016/j.electacta.2008.08.049

J. Kim, J. Jang, Y. Lee, and Y. Kwon, Enhancement of electrocatalytic activity of platinum for hydrogen oxidation reaction by sonochemically synthesized WC1???x nanoparticles, Journal of Power Sources, vol.193, issue.2, pp.441-446, 2009.
DOI : 10.1016/j.jpowsour.2009.03.070

. Styrènesulfonate-de-sodium, Comme précédemment, on étudie l'influence de la quantité d'ionomère de Nafion ® présente dans l'encre de dépôt sur les performances du catalyseur

V. Figure, Courbes de réduction de l'oxygène sur le PSSA 5 (encres contenant 100% de Nafion ® et 50% de Nafion ® par rapport à la quantité normale) et platine déposé sur le Vulcan ® après correction de l'effet capacitif et de la chute ohmique

M. Weissmann, S. Baranton, J. Clacens, and C. Coutanceau, Modification of hydrophobic/hydrophilic properties of Vulcan XC72 carbon powder by grafting of trifluoromethylphenyl and phenylsulfonic acid groups, Carbon, vol.48, issue.10, pp.2755-2764, 2010.
DOI : 10.1016/j.carbon.2010.04.003

C. Y. Du, T. S. Zhao, and Z. X. Liang, Sulfonation of carbon-nanotube supported platinum catalysts for polymer electrolyte fuel cells, Journal of Power Sources, vol.176, issue.1, pp.9-15, 2008.
DOI : 10.1016/j.jpowsour.2007.10.016

J. Miguet, Fonctionnalisation du support carboné pour électrodes de pile à combustible, 2011.